Cisco 1811W ISR Routing Configuration Assistance
I am looking to configure a Cisco 1811W ISR to route between two networks: 192.168.1.0/24 and 10.0.20.0/24 and allow 192.168.1.0/24 access to internet via 10.0.20.254 gateway.
FastEthernet0 has been assigned 10.0.20.37/24
FE2 - FE9 are all configured with "switchport access vlan 192". Vlan 192 has been assigned a static IP: 192.168.1.1.
From 1811W, i am able to ping 192.168.1.x hosts, 10.0.20.x hosts, and internet (22.214.171.124).
From machine on the 10.10.10.x network, i am able to communicate with nodes 192.168.1.x nodes. From machine on 192.168.1.x, I am able to communicate with 10.10.10.x nodes.
From 192.168.1.x nodes, i am not able to ping 126.96.36.199. Traffic is routed to 192.168.1.1 then dies.
I am looking for complete unrestricted two-way communication between the networks 10.10.10.1/24 and 192.168.1.0.
No wireless involved (even though 1811 is capable). I
Gateway of last resort is 10.0.20.254. This is inside interface of ASA firewall which is using NAT to internet IP.
Network diagram and running config attached.