My responsability as project engineer is developing all type of calculations using ANSYS and STAAD PRO software mainly. Static and dynamic calculations, and also linear and non linear calculus.. Customizing ANSYS using APDL and TCL programming. Calculation of all types of great scale steel structures (tubular, lattice, singular,..), over 100 m hight in some cases, with great influence of turbulence and inelastic phenomena. Research and Development Center in Automotive (CIDAUT ), located in the Technology Park in Boecillo, taking part in several projects, many of them aimed at the simulation of dynamic high-strain phenomena using finite element codes within the simulation of impact department. Software used was PAM-CRASH/SAFE (CAE), I-DEAS (CAD/CAE), ANSYS (CAE), MADYMO (CAE
Master in mechanical Engineering/Mechatronics (2012),my study area make me an expert in AutoCad and Pro-Engineer, and to get a good background about ANSYS and MatLab. Because, my publications in English, i have a very good knowledge in technical writing, and translation skill (English-Arabic-English).
have just completed my masters in Chemical Engineering from Indian Institute of Technology Hyderabad. There I had researched on Direct Alcohol Fuel Cells and I have used MATLAB, ANSYS FLUENT, GAMBIT and ICEM for the project development. Currently, I am working in Solar energy field. Modeling and Optimization of solar Power plant design.
Overall 7 years of experience in Mechanical Engineering Design, Development, Analysis, and CAD. Hands on experience in tools like Simpack, Gensys, Ansys, Matlab, UG, Catia, and AutoCAD. Exposure in various vehicle components and their dynamic analysis, Computational Fluid Dynamics. Exposure in Aero Engines and derivatives - Turbine systems and accessories. Complete product life cycle exposure including Concept Design, Preliminary Design, Detail Design, Analysis, Manufacturing and Testing. Handled highly complex projects for design of Gas Turbine components and other Aero Derivatives. Strong technical competencies in formulating design rules. Hands-on experience in Project management of diverse engineering projects. Exposure in Modeling and detailing of various Gas Turbine engine and accessories components including various fabrications, detailing and assembly drawings.
A result oriented Mechanical Engineer with 2.5 years of experience in Product Design & Development Domain. Extensive experience in design and development of various Energy Meters and Protection Systems, stretching right from concept stage to the PLM activities. Proven ability and effectiveness in project management related activities such as deriving customer requirements, proving project viability, budgeting, and providing strategic solutions for execution of the project etc. Cleared written examination for Associate Value Specialist of Society of American Value Engineers. Highly proficient in using softwares like Pro Engineer, Pro-Mechanica, DFM Pro, and AutoCAD and also proficient in Corel draw 11, Open project, and Microsoft office. Worked on Fluent and Ansys Workbench. Research Interests in Discrete Phase Modeling (CFD), Bubbly Flow, Thermal Fluids, Hydrodynamics.
Strong experience in structural design, suspension and chassis, vehicle integration, sheet metal and mechanism design. Proficient in the use of GD&T. Proficient in the use of Pro Engineer, Pro Mechanica, Pro Mechanism and Ansys Workbench. Strong knowledge of FEA and stress testing.
I am a Mechanical Engineer from UET Taxila with cgpa of 3.44. I have acquired a sound overall knowledge of leading edge engineering principles, tools, and practices with emphasis on heat transfer and designing. I am proficient in the use of various automated solutions including Pro Engineer5.0, ANSYS 9, Auto CAD and Solid Works. My final year project is Design and Fabrication of Disk Brake Mechanism and Thermal Analysis on Wind Tunnel. I have also done term projects as Insulation of Clinker Cooler to minimize heat losses from Clinker Cooler (Fauji Cement), Experimental Analysis of Flow Induced Vibrations in Shell and Tube Heat Exchanger, Designing of a Micro Air Vehicle(MAV). I have also gained industrial experience by doing Internships at HIT Taxila and DG Cement chakwal. My personal attributes include creativity, analytical and trouble shooting skills. I interact productively with people from diverse backgrounds. I have a history of quality work carried to timely completion.
We are a team of expert CAD engineers. Our expertise ranges from AutoCAD, ProE, Solidworks, Inventor to Analysis tools like Ansys,MathCAD, CFD etc. We,as a team have worked on product development, product validation, optimization.
Masters in Mechanical Engineering from Brunel University UK with the background of Mechatronics Engineering. Extensive research in Ansys and different CFD softwares. Final Thesis was based on CFD simulation of melting process of phase change materials in double pipe heat exchangers.
We are a mechanical product design firm, and focus on electrical product structure design. Our website is http://www.mekesim.com/english/ In our team, the experts average have 7 years work experience in telecommunication company. And have experience of indoor and outdoor product design. The components includes sheet metal, die casting, PCB, connector, cable, ect. Familiar with related product manufacture, can find supplier to manufacture product for you. We are able to do structure design, tolerance analysis, FEA, thermal analysis, testing. Program used by us: Pro/E, ANSYS, Icepak, AutoCAD.
As a mechanical engineer i prefer different mechanical design.i am skilled CAD designer with 2 years of experience in Autocad,Solid works,Ansys14,Catia v5,ProE,Inventor2013,matlab.Microsoft word,Excel,Power point,my goal is to build up my career as a design engineer. I create 3d models and 2d drawings for production, quotation or rendering purposes. I have experience and high skills in engineering, technical drawings and mechanical design. . i am Mechanical Design Engineer from Bangladesh University of Engineering and Technology (BUET), Bangladesh. My objective is to enhance my skills as well as to provide the employers with excellent service at a fair cost by being meticulous in my work and paying very close attention to details for an accurate finished product. I have over 2 years of cumulative experience doing mechanical design and simulation, i'm honest,reliable and responsible.
I just finished an automotive engineer university and i am interested in designing components in programs like Catia, Ansys and Autocad. I olso like editing photos.
I'm working for two years as construction mechanical engineer and as assistant professor on the faculty of mechanical engineering. I'm very good in classical mechanics and mechanical design. For stress analysis I'm very handy with Ansys and RacurDyn. My education as manufacturing engineer is especilly in milling and turning. In programming I use Matlab and python.
Graduated student of Mechanical Engineering Faculty, direction on Design and Product Development. Familiar with AutoCAD, Inventor, SolidWorks, ANSYS, Microsoft Office.
I am a mechanical engineer having 7 years of experience in design. I worked on Solidworks, Inventor, Autocad, ProE, Ansys in the domain of valves, reverse engineering, re-engineering, value engineering, General engineering, Casting and forging design.
My name is Dragan Todorovic. I'm Mechanical Engineer and I have diploma of Mechanical Engineering Faculty of Technical Sciences in Novi Sad ( http://ftn.uns.ac.rs/english/ ) course Mechanization and Construction Engineering. I have nine years of experience in the development of technical drawings and 3D models with Pro enginer, Catia, Autodesk Inventor, Auto CAD, ANSYS, ADAMS, Finite Elements Analysis. I am interested in cooperation in the field of mechanical engineering, 3D modeling, FEA and CAD.
10+ years expertise in the electromagnetic analysis: - Calculation of magnetic circuits: flux and magnetic flux density. - Calculation and optimisation of an actuator on a magnetic contact - Calculation of eddy currents in magnetic circuit during the transient phenomena. - Calculation of the magnetic field from conducting bus rods in a ferromagnetic shield ? 3D static & dynamics tasks - Bound task calculation ? computation of deformation and forces between conductors carrying current. - Linear magnetic oscillator calculation and optimisation. (error margin is about 15%). - Calculation of screening capability of magnetic shields. - Calculation of translational movement of armature of solenoid actuator under the effect of the electromagnetic force (error margine is less then 12%). - Calculation of material heating under the effect of induction current. - Calculation of the induction motor with the wattage of 60 kW. - MHD multiphysics processes modeling ? ANSYS Emag / Flotran / CF
I will be graduating from Stony Brook University with a master's degree and original thesis. My knowledge combines both materials science and mechanical engineering so my specialties includes not only skills on materials science research, but also knowledge of mechanical engineering. To summarize my qualification skills: 1. Materials characterization skill for semiconductor and metal. 2. Data acquisition with Lab View. 3. Data analysis via Matlab and Origin. 4. Mechanical Design and simulation with SolidWork, Autodesk CAD, ANSYS and CoralDraw
Graduate mechanical engineer with a particular interest in 3d part modeling and CFD analysis. I am experienced in Pro Engineer. Other than that I have worked on Solidworks 2011 and AutoCad 2008 and CADWORX. I use ANSYS 12.0 (CFX) for my CFD analysis work. I work as mechanical engineer for an engineering firm and have an experience of about 2 years working on the design of above ground storage tanks, piping stress analysis, hydraulics, p&id's, mechanical piping layouts, pressure vessel design and analysis and documentation work related to these jobs ( specification sheets, data sheets etc.).
SKILLS - CAD/CAM Software: Auto Cad Mechanical, Creo, Solid Works, NX CAD/CAM, Catia, Solid Edge Analysis Software: ANSYS APDL, ANSYS WB,ANSYS Fluent/CFX & ANSYS ICEM-CFD, Nastran, Hyper mesh, Ax-stream, MSC Adams,
3 years experience in design, especially in the field of automobiles. Project experiences including Formula Student UK and BAJA SAE India. Software skills including CAD(Solidworks,Catia), FEA (Ansys,SW Simulation)
I am working on structural analysis of the components for a Global Nuclear Major since last 6 years under the strict guidelines of US NRC. The major skills used as ANSYS APDL, ANSYS WORKBENCH, UNIGRAPHICS NX, SOLIDWORKS, CATIA
Trained in mechanical drafting and tool design, with 20 years of experience working as a mechanical cad draftsman in a material handling design/ fabrication shop and steel mill plant. 1. With good machine understanding, familiar with ANSI Y14.5M Geometric Dimensioning & Tolerancing GD&T or its ISO equivalent Nr.R.1101. 2.had reasonable engineering knowledge /analysis capability - to understand design intent, can justify application of dimensioning & tolerancing base on parts application and machining procedure, Experience with machined parts, cast, large assemblies and sheet metal fabrication 3. Has computer knowledge: M.S. WORD, M.S. Excel and Computer drafting using AUTOCAD 2005 and SolidWorks 2008
Chartered Civil Engineer (in Spain and Italy) formed in Italy, with Master studies in Spain and six (6) years of experience in the private and civil construction sector. Throughout this time, I participated in the development of projects of buildings, drainage and flood prevention, bridges, water treatment plants and industrial buildings.
- Recently received Master's Degree from Polytechnic Institute of NYU - Mechanical Engineering. - Searching for a full-time position in Mechanical Engineering related fields - Willing to relocate. - Passionate about learning Specialties: Excellent interpersonal and communication skills Strong organizational and multi-tasking skills Computer Aided Design: AutoCAD 2010, Pro/Engineer 5, Catia v5, SolidWorks Simulation Software: MATLAB, Maple 14, ANSYS, LabView Language: English (Native), Spanish (Fluent)
i am working as an assistant manager design in a reputed machinery manufacturing company in India. i have a good exposure in new design.i have hands on solid edge,inventor, solid works, auto cad ,uni graphics , catia ,master cam, ansys .
I am MSc in Aerospace and Mechanical Engineering, on the way to PhD. Have experience of structural design and analysis of composite material structures using ANSYS, MATLAB. Have experience of Probabilistic Design and Optimization, scientific research. Have small 3-D printing business.
9 years of experience in mechanical design including automotive, heavy engineering and manufacturing. Proficient and flexibility in using softwares like Pro-E, Solidworks, Unigraphics, Inventor and Ansys Workbench.
I am a Design Engineer in a manufacturing company. I have done my B.Tech in Mechanical Engineering from Indian Institute of Technology (IIT), India. LinkedIn : www.linkedin.com/in/mohitbabuiitp I have done internship during summer 2012 at University of Saskatchewan, Canada under Prof. Jerzy A. Szpunar on "Stress & strain analysis of pipeline steel used in oil drilling using COMSOL Multiphysics" and my B.Tech project was on "Design & manufacture of solar powered boat hull" for the competition Solar Splash organized by IEEE power electronics. Our team was also selected for final round of EFFICYCLE 2012 organized by SAE which involves fabrication, simulation & manufacturing of a three wheeled human & electrical power hybrid vehicle. I modeling and simulation software like COMSOL Multiphysics, ANSYS, Solid Works, MATLAB, SIMULINK, Pro-Engineer, Auto CAD, Solid Edge, Q CAD. I have also done various experiments on PIV using FLOWEX software & on thermocouple using LABVIEW software
OBJECTIVE To obtain a position that will enable me to use my strong technical skills, educational background, and ability to work well with people. 2012 S.A Engineering College Anna University Mechanical Engineering 75.6% Academic project: Design of die with cushion for front door front channel In this project we have designed the bending die which will reduce the wrinkles formation in the frame and an ejector for easy ejection of frame. TECHNICAL SKILLS Mechanical CAD: Catia v5, Pro-e, Autocad, Ansys. ACHIVEMENTS Successfully finished academic year project in TI Metal Forming. Organized gaming for symposium in our college.
I am a mechanical design engineer, I have a good experience in the design of special machines, mold design, machining fixtures, ... I work on various mechanical design software (SOLIDWORKS, CATIA V5) and numerical simulation software (ANSYS). I have a good experience in the implementation plan, functional dimensioning ISO ...
with near of four years of intensive experience in product development and prototyping I can make your project quickly and with height quality.I can build a product for you from picture or draft sketch. Expert in part design (sheet metal,plastic parts...) Expert in creating drawing for manufacturing(norms,tolerances....) Expert in structure analysis(ansys v12,abaqus,cosmos-works...) Ready to use any kind of cad softwhere (Pro-engineer,solid works,catiav5,auto-cad...). I'm ready to help you in any subject related to( mechanics,mecatronics,manufacturing...)
CFD simulations experience in turbomachines, especially rotodynamic pumps (geometry preparing, meshing, solving, optimization, post-processing). Multiphase (gas-fluid, solid-fluid) flows simulations, cavitation simulations etc. Ansys WB, Blade Gen, Icem CFD, TurboGrid, Ansys CFX.
Mechanical Engineer with proficiency in AUTOCAD, SOLIDWORKS, ANSYS. Skilled in FEA(finite element analysis) and CFD(computational fluid dynamics). Aerodynamic analysis, Industrial and Product design, 3d printing, rapid prototyping are the fields that interest me.
Graduate in Mechanical Engineering. Key strengths include CAD modeling using SolidWorks, Pro-E and structural analysis using ANSYS. I have a semi-professional command in design using SolidWorks. Familiar with various CAM softwares. Can provide clients with CAD solutions within deadlines.
Proficient mechanical design and manufacturing engineer. 5 years solid work experience in industry. USA design and Chinese manufacturing capability. - Solidworks - Ansys - CNC - MasterCAM - Rapid Prototyping - Rapidform -...
Thermal, Structural and Vibrational Analysis of Various Mechanical Components in Automotive and Aerospace industry, creation of best 2D and 3D Finite element modelling and also creating surface modelling , part modelling, assembly modelling 2D to 3D conversions, using aviable tools like CATIA, Ansys, Hypermesh,Patran,NASTRAN
Developing mechanical designs of special purpose machines. Proficient in: AutoCAD, Autodesk INVENTOR, Solidworks, Unigraphics NX, CATIA, ANSYS, MSC ADAMS, Microsoft Project and MS Office. Also benefitting from building facilities expertise to upgrade business, shop units, restaurants, hotels and industrial premises (plumbing, renewable energy, HVAC, fire protection and electricity installations)
I am a structural design Analyst. I specialized in Ansys, hypermesh and CATIA. I worked as senior analyst in a aircraft company. I am looking forward for an opportunity to work in structural analysis area with full commitment and professionalism.
I currently work as a Mechanical Design Engineer, primarily on the specification and design of large production equipment. In addition to mechanical design, I am also passionate about diversity, especially in regard to LGBT Awareness and developing allies. Specialties: Computer Aided Design and Finite Element Analysis (SolidWorks, Pro/ENGINEER, ANSYS), FlexPDE, Computer Programming (C++, Java, MATLAB/Simulink), Technical Writing, Microsoft Office
Diploma as an Engineer of Industrial Design from Technological Education Institute of Western Macedonia, Greece Have been working on various kinds of projects as a freelancer industrial designer since 2010. 3D Design/Parametrik modeling, 2D Drawings, FEA, Mold Design, Sheetmetal Design, Assembly management, Repair/replace/modify 3D geometry, concept modeling, High quality Rendering+Animatio,File Converting CAD: SolidWorks, Pro-E/Creo CAM: Pro-E/Creo, CamWorks CAE: SolidWorks, Pro-E/Creo, ANSYS Rendering/Animation: Keyshot, Showcase, Solidworks, Pro-E/Creo Solidworks Certified Associate, License (C-QJMNHAMHAK) Solidworks Certified Professional - Core / Mechanical Design, License (C-W28QQU6YDN) Solidworks Certified Professional - Advanced Weldments, License (C-38AQX3RMPP) Solidworks Certified Professional - Advanced Sheet Metal, License (C-Y9RURZJSHY) Solidworks Certified Professional - Advanced Surfacing Specialist, License (C-A39RVWPSK6)
I am B.E Mechanical with 3 years of Experience in Manufacturing industry like Heavy Engineering and Manufacturing of Pressure Vessel also Knowledge of ASME and also NDT level II. I have good hand on Mechanical Software like AutoCAD, SolidWorks, CATIA, ANSYS.
We have 19+ years of R & D experience in product design & development associated with conventional cum CNC machining process, familiar with solidworks, AutoCad,MasterCam,& Ansys We are a very much strong in concept / core design engineering, & we familiar with trouble shooting & rectifying the legacy products issues with new innovative features, (specialization in Textile Lab equipments & machine vision Automation projects by camera logic image processing)
We are a result oriented hard working mechanical engineers working honestly on many others dream success.We are dedicated to develop and deliver reliable, flexible and cost-effective back office solutions for our clients. We are able to adeptly use all applications related to product development of design like Proe ,Ansys,CAD Efficient using internet. Can handle deadline pressure without failing and have shown to come on top in getting targets done. Meticulous in work approach. Trustworthy and ability to handle sensitive and confidential information. To exceed expectations and show positive results.
I am an expert designer for the production process by using various available tools of CAD designing which is handling of different CAD software to develop manufacturing design of various product. I handle design through AUTOCAD,CATIA,PROE Have a knowledge of design simulation through ANSYS.
I am a Mechanical Engineer with a vast area of expertise Including Designing and Management, I like what I do as an Engineer specially when I engage with designing because it satisfies my curiosity and make me feel creative.
I am a well experienced CAE professional with a good knowledge in preprocessors and Solvers like Hypermesh, ANSA, Simlab, LsDyna, Radioss, ABAQUS, ANSYS etc.
A senior mechanical engineer with 8 years' experience. Familiar with the whole process of mechanical design, manufacturing, assembling, installation and trial running of mechanical equipments.Can use Solidworks, and AutoCAD proficiently for the design of mechanical products. Good commanding of CAE theory. can use ANSYS for the FEA analysis of mechanical products
I have Master Degree in Design Engineering and a Bachelors Degree in Mechanical Engineering. I can undertake following jobs:- In Ansys -Static Analysis (linear and nonlinear) -Modal Analysis - Thermal Analysis - Design Optimization In Catia - Prepare Assembly 3d models and drawings for machine manufacturing industries and sheet metal - Detailing of Machine Parts In Autocad - Basic Drafting and Detailing - Architectural Drafting - Steel Structure Detailing
i am a mechanical engineer. i deal with auto cad, pro-e, catia and ansys.
I am a Mechanical Engineer,working in Bangkok. I am working as design engineer. I am interested in the field of 3D modelling and Analysis software. I have presented an international Technical paper in CFD. The analysis is done ANSYS software. I have also done analysis on exhaust pipe for SAE competition like SUPRA, BAJA, Efficycle.
My objective is to assist employers in the design and development of their products. I have good experience in product design and development including rapid prototyping as an industrial/mechanical designer. Tasks I perform include design using 3D modelling, creation of mechanical drawings packages. Typical projects include devices consisting of machined, sheet metal and injection moulded parts . I can write CNC programs Also I can do much more than make pretty images in Pro/E I feel my skill set and experience is a powerful tool in creating high reliability product/component designs while keeping in mind practical and cost effective manufacturing protocols and processes to produce them. Design tools I am proficient in are PTC Creo , solidwork , Ansys and Autocad
PROJECTS Mathematical Modeling Of Ford Zetec Engine Valve Train Using LabVIEW To analyze the given Valve train data to calculate the different parameters like Friction, Power Loss, Oil Film Thickness, Co-efficient of Friction & their concerned graphs of obtained data by using LabVIEW. THESIS Power Generation System Through Heavy Vehicles And Live Floor Power Generation System To devise a system to generate power using DC motor as a generator when heavy traffic and pedestrian pass over the assembly. The ramp is made up of metal plates in the road that move up and down, in a see-saw motion, as traffic passes over them. The movement of the plates drives a specially developed flywheel, which in turn drives a generator to produce electricity. TECHNICAL SKILLS COMPUTER SKILLS Programming Skills: Turbo C / C++ v 4.5, MATLAB, Assembly, Visual C Basic 6.0, RS Logix 500, LabVIEW. CAD Designing: AutoCAD, Solid Edge, Ansys. Others: Proteus, FESTO FluidSim, MS Office.
I have three months experience in "Part Modeling". I have good knowledge of Ansys (analyzing software) too.
Bachelor and Master degree in Mechanical Engineering and Mathematics. I offer fast and quality work on a variety of engineering topics and language translations. Skills include: FEA: ANSYS ADPL, ABAQUS CAD: 2D/3D drafting with AutoCAD, SolidWorks, Pro/E /Creo Programming in MATLAB, MathCAD and Visual Basic Languages: Fully French/English bilingual Photography: Photo editing in Photoshop and Adobe Lightroom
Advanced Ansys FEA (coupled field, transient). Microwave / wireless (HFSS, RF MEMS design). Solidworks.
I am a mechanical design engineer from Serbia .I am expert in 2D/3D drafting, machine design, CAD design, mechanical calculations, industrial design, and even plastic molding and detailed analysis all with rendering, using different software programs ( AutoCAD, SolidWorks, Inventor and Ansys.) I'm a proud team member of DesingHyper, team of engineers all over the world who provides, besides all the above, CFD/FEA, details analysis, animation.. ) www.designhyper.com
I am a new contractor on Elance but i have high experince and am trying to build a reputation here(PLEASE SEE MY PORTFOLIO BEFORE TURNING AWAY).I am a mechanical engineer skilled in problem solving with strong maths and physics background.I am proficient in engineering designs and analysis.i have high expertise in RAPID prototyping,EXTRUSION and INJECTION molding.my software expertise are : Solidworks12 CATIA V5 Pro-Engineer Unigraphics NX Autocad12, ALIAS 3D Ansys12 Technical courses which i have done for equipping myself to be competent and keep my knowledge and skills updated are: Plant Engineering and maintanance Advanced Welding Technology Operational Research Advanced Diploma in Oil&Gas also interested ,freelance writing.I GUARANTEE THAT MY WORKS WILL BE UP TO UR EXPECTATIONS AND WILL BE DELIVERED ON TIME OR U DONT HAVE TO PAY. Looking forward to work with people having professional integrity.
Nikolaos Kavvadias received the B.Sc. degree in physics and M.Sc. in electronic physics from Aristotle University of Thessaloniki (AUTH), Greece in 1999 and 2002, respectively. In 2008, he received his Ph.D. on custom processor design methodologies from the same department. From 2008 to 2012 he was a lecturer at the Department of Computer Science and Technology of the University of Peloponnese, Greece. He has been involved in the EU FP7 ENOSYS and ALMA projects. He now works as a consultant, scientific researcher and a freelancing developer. Specialties: VHDL, Verilog HDL, FPGAs, high-level synthesis (e.g. HercuLeS), EDA (Electronic Design Automation) tools (e.g. YARDstick), Processor/microarchitecture design (e.g. ByoRISC), System semiconductor IP design, compiler development, ANSI/GNU C, GCC, LLVM, Machine-SUIF compilers, Tcl/Tk, TXL programming.
Mechanical engineer in the motorsport engineering field (designer/race engineer) with experience in other areas such as marketing, marketing research... Skills (included but not limited): CATIA V5 LsPrepost LsDyna Adams Car CFD Nastran/Patran Adams Car Mechanical Engineering Mechanical Design ANSYS workbench Altair package Industrial Design Structural Analysis Automotive Motorsport Machine design crashworthiness AdamsCar crash OptiStruct Hypercrash Telemetry Data acquisition Power Train Vehicle Dynamics Aerodynamics Race engineering Data engineering MSc Adams Development Testing Reverse engineering WinGeo XFOIL Ricardo Wave Pi Toolbox Aim Race Studio Motec i2 AVL Boost RADIOSS 3D Design 3D Scanning 3D Modelling 3D Printing SolidWorks Siemens NX Hyperworks Abaqus Wind Tunnel Chassis Sim Matlab Star CCM+ Hypermesh Materials Engineering Manufacturing English-Spanish Research Marketing SEO ...
Hi, I am Harunur Rashid working as a senior structural design engineer in RB builders.I am BSC in civil engineering and MSC in structural engineering.I am very good in structural and Architectural design.Very fluent in Auto CAD,Etabs,Staad pro,Sap,revit,3ds Max,Ansys,
I am an engineer with strong mechanical engineering knowledge, supported with basic understanding of electrical engineering, control design and programming. I value high quality work and I am sure to deliver it. I possess skills in computer aided engineering software, primarily in Autodesk Inventor, Siemens NX and Ansys Workbench. I am able to create parametric 3D models, renderings and engineering drawings based both on European and American standards. I have professional experience in: - Continuous blow molding machines design. - Welding and machining tooling design. - 3D Modeling of components for aircraft engines and turbines. Thanks to my education, my designs distinguish themselves as easy to manufacture, assemble, and maintain.
Design Engineer, having expertise in - Product Development - Mechanical System Design - Poster and Banner Designing.
Expert in Finite Element Modeling Analysis
With a mechanical engineering background rooted by my University of Illinois (Urbana-Champaign) curriculum, I have had the pleasure of gaining skills through many different projects and experiences. With industry experience in systems engineering, production, and structural design, I have used my knowledge in a wide range of mechanical engineering applications. Projects in metal 3D printing, electric vehicles, hobby rockets, solar power, invention prototyping, thermoelectric cooling, and mechatronics have allowed me to expand my experiences beyond industry. New experiences and adding value through engineering is what excites me and is why I seek out these new projects. www.linkedin.com/in/jasonroesslein
Experienced Mechanical Design Engineer with Master's degree and a diverse skills set. Innovation is my strength. Skills include: 1. 3D Modeling (Pro/E, Solid Works, Unigraphics) 2. Stress Analysis (ANSYS, Pro/Mechaica and hand calcs) 3. Concept Design 4. Detailed Design 5. Create FMEA and DVPR 6. Failure Analysis 7. Cost and Warranty Reduction 8. Technical Writing 9. Product Pricing 10. GD&T and create drawings 11. Design for Manufacture and Assembly 12. Packaging 13. New product builds on assembly line 14. Managing Production Emergencies 15. MS Office (Word, Excel, Power Point) 16. Piping design, critical nozzle/orfice design, valve sizing 17. ASME B31.1, B36.10 piping codes Product Design Experience/Knowledge: 1. Advanced Diesel Engines (6.7L, 9L, 10L, 11L, 13L, 15L) 2. Aftertreatment Systems (2010 and 2012 EPA regulations) 3. Medical Devices (Stents, prosthetic implants) 4. Power Plant facilities 5. Steam Turbines (25MW - 1500MW)
I am an Aerospace Engineer, MEng (Hons) with 15+ yrs of experience. Our engineering company has specialist in the differing fields of mechanical, aerospace and civil engineering (MACE). Services: 2D / 3D CAD Design, Product Design, Interior Design / Architecture Rendering / Animation FEA / CFD Simulations PCB Design *see service description for full details
I'm a Mechanical Engineer by Profession. my strong fields are the designing and manufacturing of the machine components.
A ?Development and Analysis of Products *Timely completion of 3D Models, Drawings, and Design Requests * Carryout drawings and calculations in accordance with technical procedures B - Assist with future product development of existing and new products * Design new products/components in line with the requirements of the company * Maintain quality standards on all new and existing products C - Provide Engineering support to the Sales, Site-Services and Production functions. Produce general take-offs, component drawings, design work and general product advice etc. D - Provide Engineering support to Consulting Engineers and Contractors E. Manage projects from design stage right though to manufacture and dispatch
Specialized in Mechanical design with initiative and excellent analytical skills, strong work ethic and solid experience in engineering projects, from conceptualization to construction supervision
I have graduate degrees in mechanical engineering. I have 5 years of industrial experience in the areas of product design, 3D CAD modeling, and manufacturing. I have CMfgE certification from SME as of 2009. In addition, I have three years of full time teaching experience in the university level in the areas of mechanical product design, engineering drafting, 3D CAD modeling, design for manufacturing, and FEA analysis. I have extensive knowledge of traditional and non-traditional manufacturing processes. I have experience in project management and leadership. I have strong skills in verbal/written communication. I was graduated with honor from college, and graduate school.
i am a Mechanical Engineer with a good mechanical designing background of different mechanical components and systems. i have also an extensive experience in analysis of different flow problems in CFD commercial code FLUENT i-e Flow in regenerator, stirling cryocooler, porous media, CD nozzle etc also knew how to write UDF for varying boundary conditions in FLUENT. i have also some experience in MATLAB i-e wrote different numerical codes for Thermal and flow analysis equations of regenerator and striling cryocooler. Flow in convergent divergent nozzle using McCormick techniques ( using predictor and corrector steps for discritizations of Flow equations of nozzle).
I am a mechanical engineering professional which having over 8yrs of experience in design sinulation and manufacturing components. I use ProEngineer / Solidworks/ AutoCAD / Unigraphics / Ansys I also have vast experience (more than 20 years) in IT hardware, OS (windows based and fair knowledge on Linux and Android based systems), troubleshooting, consultancy (in the hardware and OS - but NOT in Programming) and software (CAD packages, MSOffice, MS Project, Internet/Email) I have access to third party facilities which are able to machine any kind of industrial component as prototypes / samples. While maintain high accuracy, punctuality and product quality are the main concerns.
We are experienced design engineers having working expertise in various streams including Manufacturing, Automotive, Aerospace, Consumer Goods, Tooling industries. Our software expertise include Solidworks, Catia V5, Pro-E, Creo, Unigraphics , Inventor, Autocad, Hypermesh & Ansys. Quality and In time delivery would be our commitment towards any work we accept. Providing cost effective service at the best turn around time is our strength.
DS2E was established in 2001 to offer advanced consulting in the Mechanical, Aerospace, Petroleum, and Bioengineering fields. We are an entity based on individual expertise, totaling many years of experience. Our objective is to develop, test and evaluate advanced computational methods and tools to support modeling and solve challenging technological problems in solid, system and structural dynamics, in acoustics and fluid dynamics, and in fluid-structure interaction, with both deterministic and random considerations.
CAD Drafting Solutions is a woman-owned small business that specializes in mechanical design, 3D modeling and cad drafting services.
PhD in Mechanical Engineering - Expert in 2D drawing, 3D modeling, CAE, CFD, mathematical / mechanical calculations and dynamic simulations of mechanisms.
I am a highly motivated, talented and hardworking personality with an extensive experience in design processes as well as an understanding of construction and manufacturing method. Experienced in all stages of a product design, from research to development right through to final manufacture. Possess advanced knowledge in FEM simulation. Processes a good team spirit and a deadline oriented work ethic with the ability to produce detailed technical specifications to client requirements.
I am a mechanical engineer with project management experience of full project life cycle. I am in field of design and simulation for more than three years now. My specialties are 1- product development 2- Design optimization for manufacturing 3- simulation 4- Engineering solutions I'm expert with tools of modeling and simulation like solid works and ANSYS
A design engineer at a leading engineering consultancy, providing cost effective solutions to the industry. Background in product development, conceptual design, detail design, finite element analysis, 2D drawing generation, manufacturing, project management, resource management, optimization and testing procedures. Well versed in engineering standards (ASME, DIN EN, BS) Good background in project management, total quality management and statistical process control. High level of expertise in Microsoft Excel, have created macros, userforms and fully automated spreadsheets for supply chain management, inventory control, manufacturing time and cost estimation and engineering calculations.
Experienced in stress analysis of all structural components ( metallic/composites). Specialized in all Automotive lighting, pressure vessels, composite products etc.
Drawing & Designing Jigs & Fixtures, Tools, Press tools for Cold Extrusion, forging. Product development through reverse engineering and Re-engineering. Ascertaining manufacturing feasibility & preparation of Process layout & Bills of material (BOM). Sketch to detail drawing / 3d modelling through CAD Softwares.
I can offer you my 10 years' experience in Strength Analysis, PhD in Technical Sciences.
My position as a design engineer in a small (5 people) consulting company gave me experience with clients in a wide variety of industries. I have designed and/or analyzed the following products; dump truck beds, refrigerator fans, electronics enclosures, spinal surgery equipment, cookware, various intricate injection molded plastic parts, exhaust systems for large turbine engines, large kinetic energy storage devices and much more. I also have personal experience working in machine shops using lathes, milling machines, TIG welding and Mig welding. I like to think that this job gave me a good mix of industrial design and mechanical design/analysis skills that we can use to develop your products.
I am a teaching assistant,Automotive department,Faculty of engineering,Ain Shams University. I am seeking part time job in mechanical engineering, where I would utilize both my current knowledge and interpersonal skills.
I'm a structural engineer, with ambitions for the future work in various types of construction projects.I specialize in design of RC and steel structures, for industrial and residential fields. I got employed in a government research facility for engineering (HBRC) in Cairo Egypt. where I learned evaluating and troubleshooting of several structural projects.I also worked for consulting groups in Cairo, contributing in structural design of ordinary industrial steel hangars, analysis and check of RC residential buildings, and other types of projects.Implementing the knowledge from research field into commercial use and troubleshooting.I'm ready to work with high quality output according to the desired standards. with expertise in design by international structural codes, in addition to skills of interpreting and coordination of adjacent drawings with the requested structural package. I have management skills to deliver jobs and tasks on dead lines.
Founder and C.E.O of a Vision to Prototype Design House . Believes any design is a form of Fine art and Precision and strives towards these goals in his designs.
I am automobile engineer/designer with over 3 years expirience in 3D modelling. I offer extra quallity for acceptable price and right on time. Being professional is my main priority as well as building long term business relationship for future projects. Your satisfaction is guaranteed and it is my main priority. Hire me and you will not regret it!
With the industry acknowledged competences in delivering offshore and onsite Engineering & Design Services, Merritt is pure-play Product Design and Engineering Company.engineering concept design, generation of 3D solids and surfaces, preparation of 2D manufacturing drawings, design automation, product development and tooling. Engineering Analysis services include finite element modeling, static analysis (linear & non?linear), fatigue, buckling, dynamic & thermal analysis. Our plant engineering services includes process planning and simulation, 3D modeling, visualization of plant layouts, piping, design of electrical systems, detailing and technical documentation.
Mechanical Design Engineer
working with 5+yrs experience in the field of FE simulation and engineering design with sound knowledge.
Mechanical engineer with expert CAD/CAM/CAE knowledge. Experienced in DFM and DFA.
We are a team of Mechanical Design Engineers from Pune, India. We are having experience of working on various CAD tools such as Pro-Engineer, Solid Works and Autodesk Inventor. We want to work as contract designers for your firm directly from India at a very reasonable rate. We can convert 2D to 3D drawings, create parametric designs, various assemblies and manufacturing drawings with GD&T. If we are given small to medium designs, we will definitely work on such designs and can help your organization to achieve its results soon. The charges will be based on per design (fixed fee) and not on hourly basis (time basis).
I am a mechanical engineer with a background in mechanical design and project engineering and highly experienced in design, quality systems, testing and validation. Recognized officially to Australian standards by Engineers Australia as a professional engineer and seeking to contribute to an innovative company.
hello, i'm final year mechanical engineerimg student!!! its nice to hav ths kinda account!!!! even i can also lern!!! at ur service
I'm an Aerospace Engineer based out of India. I have experience working with various softwares and have a fluency in English, French, Russian and a few Indian languages as well.
I have completed my engineering in Aeronautics and currently working as a Computational Fluid Dynamics(CFD) Engineer in a company. Role and Responsibilities: -Responsible for CFD analysis using CFD tools; -Building the geometry for the given problem; -Creating the Mesh (Structured or Unstructured) on the geometry; -Pre and Post processing of the case using CFD tools; -Generating reports and presentations for clients; -Have good hand experience on design tools like SolidWorks, CATIA, AutoCAD.
I am electrical engineer , i have experience with some large civil projects , hydro power, transportation, environmental engineering.Also building design, electrical machine design (induction motors).