Architectural Illustration rendering visualisation www.proofstudio.blogsome.com
Award winning design services & as well as construction document services using Revit Architecture, AutoCAD Architecture and AutoCAD. I am a Certified Professional Building Designer (CPBD) with professional membership with AIBD, a Certified Building Plans Examiner (CBPE) with professional membership with ICC, and a LEED AP BD+C. I am a Revit 2011 Certified Professional. I have 20+ years experience with 8 years in residential. I have worked with most of the national home builders, and single custom clients as well.
I am a BCivEng with 12 plus years designing, modeling, drafting and managing a variety of civil related projects primarily involving land development and water quality. Recently, I have expanded into architectural drafting and GIS design/analysis. I provide professional services with an attention to detail and do so ameniable no matter what the scope. I look forward to working with you and developing long term affiliations.
As a Revit technician, I have the skills and knowledge to be an asset to your firm. For instance, I have an Associate???s degree in Architectural Drafting and Design and have been working directly under licensed Architects and Engineers for Ten years. In my career I have worked with local and national home building companies, AE firms and a ???systems built??? manufacturer. As a part of these companies, I have contributed to a wide array of great architectural and structural projects that distinguish our region. Furthermore, I have personally been responsible for the design of four schools, countless houses, two hotels, multiple flex spaces, apartments and an array of Tenant Improvements including dining establishments. I have worked with FAA related projects including Air Traffic Control towers. This is in addition to many other projects including pre-cast, tilt-up and curtain wall. In my work, I have been involved on both sides of the design table as an Architectural
PHOTOGRAPHER & PHOTO EDITOR: I possess a diverse professional background in photography from products to travel, architecture and fine art images. I have provided photos for magazine advertising for clients in real estate, electronics, automobiles, interior design, etc. A good photograph is your calling card and represents not only who you are, but the products you represent. Creative images with good lighting, and properly focused, and will convey your message to prospective clients. Photo editing has become a necessary tool for enhancing photographs which I provide with all images I create. Included is basic editing on all images. Your schedule is important and is my top priority. I will not bid on your job if I cannot meet your deadline.
9+ yrs experience. 500+ projects for Scandinavian countries. Engineering academic background. Autodesk Product Specialist, authorized faculty and BETA tester. I am at my best to offer this world my service from Bangladesh as freelancer. I am always interested to develop long term relationship.
Experience - Worked with world leading design consultancies & Contractors implemented BIM Strategy workflow in Architecture, Structural & MEP disciplines. Bringing analytical performance demonstrated 10 years in (BIM) building information management. And further 8 years in 3D construction design via Commercial & product design engineering. A personal win on major projects particular Aviation, Healthcare, Education Civic and Community, Ministry of justice, Defense and Residential Schemes. Particular - Project workflows (design development, construction documentation phases) and project management. Excellent level of visualization skills and awareness of design trend Good Knowledge of Construction and Building regulations and QA procedures and H&S requirements. Technical knowledge of the BIM application used, related systems and network infrastructure, and awareness of new technologies. Present - Professional expertise with professional consulting engineering firm, Responsible
My first goal is experience and success, after that goes importance of the money.
precast detailer, expert in sketch up 3d, vray ,autocad and lumion 3d
I'm an italian architect with a good international experience, I had my practice in Italy for 5 years than I moved to Netherlands, where I've been living for 8 months, to move the next step for my career. I was involved for three months in the Erasmus for Young Entrepreneurs programma and now I'm totally focused on the next challange. I'm an Expert Designer with very good computer skills, I work confortable with 2d and 3d design software and I'm used to work combining different suite. My academic and professional experience point out a strong aptitude for team working and I have often had the opportunity to prove my creative thinking and my ability in problem solving and project management. I am confident that having the opportunity I could offer a professional and completely fulfill work.
Being an Architect with background of study in Diploma in Architectural Engineering in High School Level and having work experience, I have developed sound knowledge in Architectural field. My destination is to fulfill architectural needs of the client as they require like a "Dream come true". To use my skills in architectural field and do best is my goal. I have experience in following areas: # Designing buildings # Drafting in AutoCAD 2012 and previous versions # 3D modelling in AutoCAD and Google SketchUp Pro with rendering in V-ray. # Working Drawings # Estimating
I can work fast and I'm detailed oriented.
architecture, visualization, 3d model, interior design
I am an architect. Currently working with a famous lifestyle brand of Bangladesh. Specialized in building design with interior. As my professional skill, i developed my graphical and presentation skills too. Please have a look at my designs and presentations here at portfolio. I CAN RENDER PROFESSIONAL SERVICES AS PER DEMAND is the last line about me. Thank you.
I am a new architect, expert in 3D software. Creativity and punctuality is my quality. I am hardworking, experienced and professional designer. In a project i always try to fulfill the clients satisfaction with my quality of work. And i am proud to follow the dream of a client, from 2D drawings to 3D visualization.
Taylor Made Plans is a residential design firm, specializing in new housing for urban historic neighborhoods, as well as additions and renovations to homes. Lynn Taylor is a residential designer with over 27 years experience on both residential and commercial projects. In 1993 she purchased and renovated a home in a historic neighborhood and realized her passion for remodeling design. Recognizing an unfulfilled niche, she launched Taylor Made Plans, a residential design firm, in 2000. Now in its 12th year, Taylor Made Plans has become known as THE remodeling resource for homeowners and investors desiring to preserve and rehabilitate properties in older neighborhoods in and around Nashville, Tennessee. Additionally, in mid-2004, she launched a web site to sell her award winning historic stock plans for in-fill housing on the national level. www.taylormadeplans.com
We are a small company with a big potential of motivated and experienced specialists in architectural&interior design, 2D drafting, 3D modeling and photo realistic visualization willing to fulfill any job with professionalism and responsibility. Our qualification in : Autocad, 3dsmax, Vray, Sketchup, Photoshop and Illustrator, together with our eagerness to give the best service to the client guarantees the quality of the final product. Take the chance to see it!
I am a dynamic and ambitious architect who possesses the design and development flair needed to plan. On top of all of this I have superb communication skills and client liaison.
Look at my work and you'll see who I am
Hi there!My name is Stefania,23 years old.Being at my last year of studies at the Department of Architecture at the University of Thessaly in Volos,Greece,I am currently working on my thesis and I am planning to take my degree this June. During my studies, I have attended courses considering Architectural Design, Urban Design/Planning,Graphic Design,Video Editing,Multimedia Design,History of Art and Architecture. The last three years I have been working as a freelancer. I consider myself a highly motivated person when it comes to things that inspire me and I strongly believe that Elance offers a great deal of opportunities to expand my personal and professional horizons. Being creative,responisble,cooperative and open to new ideas,I think I have a lot to offer to every task I'm charged with.
I'm an architect and interior designer with 10 years of experience.
I create interest for work with this side because i have above 8 years experience about Auto CAD 2D& 3D, 3D Studio MAX in Local field.That time i also Complete more then 100 Successful project of this area.So this encourage me to work online job.i have also experience about Some of graphic software & related job.
we r a professional team of 7, having an avid experience in the feild of construction and design.
Hi, I have been working for big Architect firms, i have a lot of knowledge in architecture , structure and HVAC. I am offering professional work and neat drawing. Very good customer service.
During the past six years I studied architecture at the University of ?Ss. Cyril and Methodius? in Skopje, Macedonia. The emphasis of my studies was to learn and understand the fundamental principles of architecture. Learning of urban design and planning, design and communication, structure and construction, interior design and history of architecture and art, I found to be very interesting and exciting, because my career goal and aspirations are to participate and to establish myself as an architect/ designer that will coexists in the modern world through the knowledge and creativity. I have found that my interests are also focused on industrial design (Electrolux Desidn Lab '08 semifinalsit) and graphical design as well. Through my previous work experience in an interior furnishing company in Skopje, I have gathered good communication skills, proper project management so I can easily present my ideas in a fluent and confident manner.
I am a licensed architect and I can help you get design, drawings and surveys done for your personal use, your business, construction, or permit, etc. I spent years doing numerous multi-family residential designs from design to construction as well as zoning feasibility studies. I have 10+ years of experience and will give you a fast, dependable and professional service at a competitive rate.
Graduated architect motivated to work and explore new technologies and work on different project in order to develop itself. Interested in energy efficiency planing for zero houses.
Hi! Following bellow my LinkedIn page link you can find some information about me and find projects I was involved http://es.linkedin.com/pub/kn-tatev/82/b4b/685
Licensed architect, with 4 year experience in housing, hotel, office and commercial buildings design, including interior design and usage of contemporary technologies and facilities.
I would like to get more experience, have a great desire to learn.
Fourteen years of experience in Mechanical design in machine equipment, HVAC System, Fire sprinkler System, Stainless Steel and Hand railing designs. I also have experience in Architectural, Structural, Plumbing, Electrical and Mechanical Plan drafter.
G'day... with over 5 years experience. I specialise in CadWorks 2D and 3D visualization.
I'm a registered architect living and working in Western New York. I hold a Master of Architecture degree, I'm a member of AIA and a LEED Accredited Professional. My strength is in finding efficient design solutions to complex challenges. As a practicing architect, I have a working knowledge of building construction while also comfortable with creating high quality schematic-level rendered images. I'm proficient with several drafting, modelling, and image manipulation software products. I look forward to working with you to achieve an optimal design solution for your next project.
Welcome to Ascent CAD & IT Services Pvt. Ltd. (ACS) Ascent CAD & IT Services is a CAD Designing & Drafting company along with handful experience in IT projets. We are based in Hyderabad, India. We deal in digitalization of all types of technical drawings, plans, architectural, mechanical, civil, machine drawings, construction documents, utility plans, site maps, sections, elevations etc. We use high-end Computer Aided Engineering (CAE) tools to achieve best results.
I graduated with a Bachelors of Architecture from the University of Kentucky and am a registered architect in both Montana and Massachusetts specializing in high end residential design for the past 10 years. I also have worked on many other types of projects from Mixed - use and commercial to things as small as sheds and garages. I love my job, I am good at it and I can help you with any design problem or construction document set you have!
I am an Architect, got my diploma in UBA. I'm specialized in retail desing. Did some cad design, project tasks and documentation. Retails such as Lacoste, Levis, Akiabara, Cheeky, Giesso, Paula Cahen D'Anvers, Lady Stork, Ipanema, Muaa...
I am a dynamic person with a five year master?s degree in architecture. I am currently working on my final thesis. I am highly skilled on the latest versions of technical and design computer programs such as AutoCAD, Archicad, Sketchup, 3Dstudio Max, Adobe Illustrator, Adobe InDesign, Adobe Photoshop, Corel Draw, and I am always willing to improve new graphics communication programs. Furthermore, I am a multitasker and a hard-working person, motivated by achieving goals. Nothing provides me with more satisfaction than contributing to the success of a project. My attention to detail and excellent problem-solving skills ensure that every project I work on is done accurately and to the highest possible standard. Adaptability and dedication are the defining characteristics of my work. I look forward to hearing from you.
I am an experienced CAD Technician currently working for a commercial architecture firm. I have 2 Associate's Degrees in Architectural Engineering Technology. I utilize AutoCAD or Google SketchUp to provide primary CAD support on offices, tenant finish outs, shopping centers and more from 1,000 s.f. to 100,000 s.f.
We have 2 years experience in Villa design and Interior Design.
Seeking for AutoCAD Operator position inside a company which will offer me professional growth and allows me to provide effective drafting solutions resulting in future career advancement opportunities.
As an architect of two years of experience, I would like to improve my skills outside of my country and I believe I could make a valuable contribution with my hard work. Last year I have been working in several projects for national and international competitions, specialized in 3D models and rendering with Sketchup and Vray. Also helping in CAD documentation and design process using Autocad, Sketchbook Pro, Photoshop, Illustrator, and so on. I am able to finnish 3D projects in a short period of time, before deadlines, and I have a demonstrated leadership for project management. For examples of my work, please visit: http://dpsarchitect.tumblr.com
experience in drawing architectural plans, structural and mechanical. I have also experience in Excel and other programs like sketchup and for renders.
Having a broad experience of 23 years as a construction professional in different organizations in India & United Arab Emirates. Involved in tendering / post-tender / construction activities in the roll of Senior Estimator / Senior Quantity Surveyor / Engineer and the types of works done are: (1) Infrastructure Works like Roads, Bridges, Tunnels, Flyovers, Railway Projects, Airport Structures, Hydro-Electric Projects including Dam & Power Tunnel and Investigation Works for Major & Mini Hydro-Electric Projects (2) Marine Constructions like Ports, Jetties, Break-waters and Shore Protection Works (3) Building Constructions like Multistory Residential & Commercial Buildings, Villas and Parking Structures. Experienced in taking out quantities of different types of works, analyzing & preparing rates for the quantities of work, structural & architectural drawings, quantity take-off & preparing bar bending schedules and drawings related to hydro electric projects.
I have ten years of working as an architect and interior designer. I am an efficient professional meeting deadlines and used to delivering within short deadlines.
I strongly believed that I could make a significant contribution in achieving the organization goals and objectives based on my educational background, work experienced and right attitude towards work.
I?m a young motivated enthusiastic individual male with great determination to be part of an dynamic team of Civil and Structural Engineers and Drafters that offers an opportunity to further enhance my knowledge and abilities with my new profession. But now I consider myself as a new in civil and structural engineering Drafter but with possessing with wide range architectural experiences from small residential homes up to large scale projects in stadium design and defense- listed site,. 2013 completed and graduated in the Associate Degree in Civil Engineering and Diploma in CAD from Southbank Institute of Technology, which will enable me to extend my professional horizon within the Engineering sector. Total of 2 years working within a firm as a 3D modeler, Revit and Auto CAD Drafter were I gained extensive knowledge and experiences consulted by Architects, Structural, hydraulic, fire services, electrical engineers in drafting Revit and AutoCAD elements within projects. Specia
I worked self employed drawing architectural plans for residential construction for 5 years. I worked 11 years as a Career and Technical Education professor at the university level teaching Woodworking, Welding, and Architectural and Engineering Drafting (exclusively with CAD)
Expirienced. Drawing fast. Quality is garanteed.
Civil engineer + architectural design with skills in AutoCAD 2D, Microsoft Word, Microsoft Excel. *10+ years of experience in architecture and engineering*
I have worked in several design projects throught the past 8 years and became an expert user of autocad, revit and photoshop. I offer 2d and 3d drawing designs, renders, illustrations, business card designs, logos, brochures, catalogues and flyers. I have worked in projects from concept to presentation, focusing on detail and quality. I am able to produce results in a fast paced environment, work with speed and meet deadlines. I also include services as to background removal, photo manipulations, retouching, color correcting and all other image editing needs.
- Planning, complete management of contract, building practices and supervision for construction of commercial-residential-public buildings and outdoor in north Italy for the major real estate companies. - Urban plans (from masterplan to standards) in north Italy. - Design and project management for interiors (FF&E, millwork, etc). - Render, photo editing and photo-postings. - Consultancy for interior remodeling, restoration & restyling, renewal of old furniture, garden design & more
i am a consultant architect from India and have been working in the industry for a year now
I have always had a passion for the arts in all forms. Thanks
I am an architect. I have a very good experience in designing, 3d modeling and rendering.
I am an Architect with experience in several important Enterprises of Engineering and Architecture in Venezuela, I love to design, I am really creative on it, and also love to draft because it allows me to get a real approach to the materialization of ideas. I?m a proactive and creative person, very organized, self-motivated and independent worker but enjoy working as a team player too. I?m always seeking and implementing new work methods and latest technologies, optimizing my skills for work.
I like my job and work hard with patience and attention to detail. Designer with more than 50 completed projects in Architectural Interior planning and individual furniture design . I develop my concepts creating 3D models in ArchiCAD. Will be useful from concept ideea,plans,sections, etc. to visualisation.
Specialties: Architectural Design, CAD, RVT, Customer Relations, Interior Design, Design Managment, 3D MAX, Space Planning, Consultant Managment
Design programs I use: -Sketchup -Autocad -Revit -Vectorworks -Rhino -Grashopper 3D 2D edition programs I use: -Photoshop -Illustrator -InDesign Render programs I use: -V-Ray -Maxwell Render Motivation: Seeking work for personal development and to gain experience in the workplace. I want to learn new tools and design methodologies. I can independently develop concepts but also in a team, thinking always in the nature of the user. Able to collaborate in computer drawings, renderings, models and design conceptualization. Open to any ideas but with analytical skills. Curiosity and innovation are my strengths. Experience: -Construction J & S (2 years): Renders, computer drawings, assistant. -Independent work doing renders views. -------------- Domino programas de Dise??o: -Sketchup -Autocad -Revit -Vectorworks -Rhino -Grashopper 3D Domino programas de edicion 2D: -Photoshop -Illustrator -InDesign Domino programas para crear renders: -V-Ray -Maxwell Render Motivaci??n: -Busco t
Architect in UK,Experience also in East Europe.can handle with all types of jobs.
I am a talented architect with a lot of projects and international competitions behind my back. Motivated to give the best of myself and produce the ultimate design, idea, drawing and visualisation needed.
I'm licensed architect from Serbia. I have had over 12 years experience with both design and draughting. Due to a downturn in local building work I am looking for worldwide work. I'm ArchiCAD, Revit and SketchUp 3d and AutoCAD 2d expert. I have Cinema 4D and Photoshop skills too.
I work as a choreographer of people, capital, and knowledge. Logic, order, and purity, are simultaneously ideals and impossibilities. The messy idiosyncrasies and chaos of life abound and fascinate me. It is small histories and gestures that define place, emotion, and spectacle. Spaces awaken memories, and memories sediment into spaces. In producing space, I mediate between smooth ideals and gritty, textured realities.
My name is Slobodan Ilic. I am an architect from Serbia. I have experience in technical drawings,floor-house plans,3D models. In every project I do my best, and I always try to make the client satisfied with the final product.
I am a licensed Architect. I have 20 years of experience in Architectural design. I strive for excellent client service, fast response times and a commitment to quality design solutions. I specialize in Custom residential design, Renovations, Commercial design solutions and mid-sized Hospitality projects. I will provide quality work for a competitive price. Contact me, let's start working on your design solution. I have an excellent reputation as a hard worker and talented designer and would be happy to provide references upon request.
5 years experience as an autocad operator
Experienced engineering and construction professional with strong problem solving skills. Excel at defining scope and determining the most efficient and effective strategies to meet the project's goals. Majored in architecture and have been in the construction industry serving the manufacturing, industrial fabrication and oil and gas industries. In depth design knowledge in equipment, parts, layouts, and piping.
Architectural studio specialized in architectural planning, industrial design, interior and furniture design, Our expertise at the service of your needs. Speed, efficency and professionality. We offer ideas and make real your dreams. Our skills concern both graphic design and 3d modeling.
I am an architect who studied in Italy for 6 years, and now living and working in Tirana.
I am a young Architect who is eager to work on challenging projects in the field of design (interior and furniture design), house projects and small projects that include innovative and interesting solutions. Although, I have a lot of experience in working with house project, being a draftsman and 3D modelator in SketchUp. In the future, i would like to learn and to slowly move up to bigger projects and being able to be the glue that keeps everything together.
Experience: Working in a collaborative environment is important. The internal dynamics of the team must be analyzed and designed with wisdom. The personal infrastructure of a work setting has a major effect on project success. Drawing: The logic behind the built environment, designing the details, sections, and plans must show the architects intention, innovation, and passion. Rendering: Showing the interior or exterior of the project is the selling point for most clients. Bottom Line: it's not enough to be great, I strive to wow clients!
Architect and Interior Designer, i can provide concept and high quality 3D visualization. I use Cinema4D, Vray, Photoshop, Lumion and Archicad.
I am a talented and experienced AutoCAD Designer. I have good experience with AutoCAD and I have been working as a AutoCAD Designer for many years. I am a hard worker and enjoy working at all critical conditions. If hired by you I will be responsible to complete the task within the stipulated time frame and with utmost confidence.
I'm architect, working with property development and real estate feasibility study. Please, interested by real estate business in Brazil contact me at email@example.com.
My professional design experience over past five years has given me great satisfaction to create something wonderful within the skeleton of a space, ranging from high end hospitality spaces and niche retail fit outs and dream homes. These supplemented with clean and at times quirky details are what make a space pleasurable, fun, efficient, dramatic and simply fantastic.
Architect with extensive experience developing projects of interior, a leading designer in the development of the interior public spaces (Pullman hotel in Sochi). Preparation of documentation of major projects. Expert in making 3D models and Vray renders.
Passionated young architect, I have only two goals: that you will like the project and that the project is beautiful. I practiced in Netherlands (mecanoo.nl), London (guarnieri.co.uk) and studied in New York (Columbia University), with brilliant architects as employers and teachers. The plan is now you can get this expertise for the reasonable price of a young professional. I will listen to you as carefully as possible, be precise with deadlines and responsive to your needs. I am passionate about this job and will put this at your service.
FRENCH : Infographiste 3D & VFX / Dessinateur d'architecture. Sp?cialit?s : 3D G?n?raliste : Modeling / Unwraping / Texturing / Rigging / Skinning / Animation / Rendering / Particules & Fluides / Tracking / Int?rgration / Motion capture / Camera mapping... Logiciels : 3D studio Max / Maya / Autocad / Zbrush / Mudbox / Motion Builder / PFTrack / Suite Adobe (Photoshop, Illustrator, After Effects, Premi?re...)
I'm fast, accurate and respects deadlines, that's why I'm the best one you can hire me .. thank you
I am an architect with more than 3 years of experience.
More than 16 years of CAD experience make me high standing professional. Plus: 9 year Project Architect. Now : working as CAD/CAM techincian and CAD/CAM teacher, as empleyee. and as freelance Architect.
I am an architect , with ambitions for work in various types of construction projects. My goal is to provide quality drafting services that illustrate your concept designs. The work is generally done in ArchiCAD, AutoCAD, Photoshop and 3D Studio MAX.
I'm a full time Architect capable of making a complete project, from 2D CAD drawings to 3D modeling, rendering and last but not least, photoshop editing.Teamwork, flexibility and professional skills are the elements that you need and I offer for a job well done.
To obtain a challenging position that will utilize my education, skills and experience for the growth of any project/company with the end view of acquiring professional growth and career advancement.
Qualifications ??? 10+ years of experience developing presentations in association with senior level management ??? 20+ years of management experience, including crisis management and communications ??? 15+ years of experience verifying existing building conditions ??? 10+ years of experience in entrepreneurial self-employment ??? 7+ years of experience in business financial operations and analysis ??? 7 years of experience researching designs for alternative energy systems ??? 7+ years of experience in emergency incident response and decision making ??? Bachelor???s degree in Construction Design with a minor in Architecture ??? MS ??? Space Studies ??? Aerospace Science ??? MBA ??? Marketing and Organizational Management
Architectural design, CAD drafting and digitizing, Design Commercial Displays, Quantity takeoff;
Throughout my working life i have gained many skills and traits that allow me to addapt and excell in multiple job oppertunities, as it stands i have experiance using the following. Pallet truck, Floor Scrubber, Cash Register, AS400 / I-Series computer systems, Microsoft office suite, Vault Cash office Equipment, Photoshop, Illustrator, Auto-CAD, Archi-CAD, Google Sketchup and Artlantis. I am skilled in multiple areas and i am always open to learning new skills and expanding my knowledge.
Over last 3 years I have completed some Architectural Building Perspective Views, Illustrated Floor Plans, Site Plans and CAD 2D Floor Plans. Convert to CAD from JPEG,PDF files. I am really enjoying with this type of works I also have some experience in the following areas: SEO, Link Building.
Do YOU need a Professional Editor and Writer to proofread your technical document, thesis, novel, statement of purpose, PS, CV, cover letter, manuscript, essay, short story, textbook content, article, and marketing material ensuring their content is flawless and appealing to readers? Why should you HIRE me? 1) I am a creative writer. 2) I hold a master's degree in Computer Science. 3) Your privacy is assured. 4) High quality work in a timely manner.
I am an architect (Dip), staying and working in Delhi, have good exposure and experience in detailing, interior, working drawing for more than 8 years. I am searching for more exposure in my field and wish to work as a freelancer.
I'm expert for 3d modeling and rendering.if you looking for them I can help you.
I am a highly motivated Architect with deep knowledge in Archicad and Revit programs in which I make the 3D modeling and BIM Coordination. My two and a half years of legal experience in BIM Coordination, have been using Revit?. I have worked on numerous projects in various fields such as Education, Health, Residential, Commercial and Office Buildings, completing almost 270,000 m2 in 3D modeling and coordination. I am equally comfortable working in teams or independently. I am a person seeking to increase my own work experience and ready to confront professional and cultural changes. I have lived in different countries and I have dual citizenship in Canada and Chile.
I am a young designer and planner, with over two years combined experience in Urban Planning and Design within a consulting environment in the United States, Middle East, and Europe, focusing on sustainable cities. My experience includes detailed application of planning and design techniques and theories, sustainable transport planning, architectural concept design, site analyses, and construction supervision. With a Master's degree in Urban Planning and a Bachelor's degree in Architecture, I have developed critical presentation, writing, and graphic skills. I enjoy overtaking challenging projects, and I work very well in collaborative and interdisciplinary environments. I am currently seeking a career opportunity with an innovative company/organization that inspires young professionals.
Im an architectural technology intern. I do CAD drawings and 3D modelling on revit. I work on detailing, presentation drawings ,working drawings and landscaping and interior designing.
I am a licensed architect and I know how structures go together.
I have more than six years of progressive experience in Architectural drafting in Perth.Also,I have had extensive experience in using Auto CAD, Revit Architecture and working with Sketchup and 3ds max to produce 3D models and realistic rendered images.
I am 28 years old, I graduated in architecture and have a work experience of 5 years in this field. Over time I have participated as co-author or author of various projects such as hospitals, rehabilitation of buildings, parks, homes and office buildings. Some of my skills include: architectural design, preparation of drawings for architectural, engineering and mechanical, architectural visualization and 3d rendering; 3d modeling as a hobby.