Im an Architecture graduate know-legible at AutoCad 2d modeling and Google Sketch up modeling. Having 4 years experience at field works.
S3Craft Technologies provides expert consulting services and automation solutions to the Semiconductor, FPGA, Electronic Design Automation (EDA) and Consumer Electronics industries in all areas of semiconductor IC design & manufacturing; including architecture, design, verification, implementation, & testing. S3Craft Technologies has been founded by seasoned technologists from the Semiconductor and EDA industries integrating proven management experience with a variety of deep technical skills. The combined industry experience of the leadership team is more than 50 years.
I am highly skiled architectural. and 3d designer with 5 years expirience ,also i am a scenographer i can provide you with high end 3d renderings , top architectural solutions and basicly anything you can ask concerning architecture jobs.
I know virtual world better than the real world,i have done thousands of 3d renderings,i have a firm grip on 3ds Max,cinema 4d,Rhino,Autocad ,Lumion,Photoshop.Currently I am a Student of Architecture , I plan to study further in Graphics designing.I offer integrity, professionalism, and exceptional attention to detail with a focus on efficiency, quality and customer service. To leverage both my creative and technical skills in projects that offer interesting challenges and provide opportunities for me to learn new things.
currently studying building, under environmental design. this has allow me to fully utilize such architectural and design sowftwares as listed. good communication skills , and the ability to produce a job well done
JAH JAH PRODUCTIONS is a full service Architectural Services Provider. We provide surveys, planning, codes research, project management, shop drawings, construction documents, top notch designing, AutoCAD drafting services, CAD management and 3D renderings, Consulting, Computer Training, etc. We can put together a design/build team that will build out the creation you desire. With top designers, architects, drafters and construction tradesmen working together, JAH JAH PRODUCTIONS is able to provide ?the best in Architecture? to any who desires. With a professional staff that is always growing JAH JAH PRODUCTIONS can perform any task necessary to get a project completed well and on-time. We have a team of consultants that can perform field surveys, produce CAD drawings that accurately reflect the space and its usage, or train you and your associates to use the programs and computers that are already in your office.
Portuguese urban planner & project manager, driven and committed to deliver a balanced and sustainable solution for projects, looking forward to obtain a Prince 2 Practitioner qualification. Also very keen in technology and innovation, actively seeking to build and develop projects that benefit from both. Love to gather, process and analyse information in various subjects, in order to make discussions within a multidisciplinary team more productive. This was my trade mark as a Project Manager, which allowed the team, as a whole, to develop the most balanced and realistic solution, defining clearly goals to be met, phasing, schedules for phases and resources allocation. Experienced user for Microsoft Windows and Office Suite, Autodesk AutoCAD, ADT, VIZ, Map 3D, Esri ArcGIS Desktop and extensions, IDRISI, Quantum GIS, gvSIG, Trimble SkecthUp, Adobe Photoshop, Illustrator and InDesign. Specialities: Professional Trainer, Project Management, Land, Regional and Urban Planning, Urban Desi
Qualified young B.E in Naval Architecture and Offshore Engineering - Competent in reading, understanding structural drawings, detailed planning and scheduling design, building with adequate knowledge of ship production. - Worked as Trainee Engineer with Vik sandVik, Conceptia & MODEST Shipyard Limited and gained practical experience in design, structural , piping and outfitting . - Very good knowledge in working with Tribon/Aveva Marine Initial Design Module. Creating Lines, Surface, Calculating Hydro statics, Powering. - Well developed communication skills with multilingual proficiency and an effective team player with the ability perform above expectations. Familiar with Maritime Classification Rules: DNV, IRS, IMO, BV, Fin-Sw ICE and RINA Pleasure Yacht rules. Familiar with API Offshore structural Design Code for fixed and floating structures. Technical Skills Sesam
I'm university graduated engineer of architecture and Master of Science in architecture and urbanism in the field of sustainable urban planning. In COSMO Innovative Center I'm a permanent consultant in services related to construction, architectural design and sustainable development. I had 5 years working experience as an architect designer in the company Tim Projekt in Budva, Montenegro. Also, I have participated in numerous international architectural competitions and contests.I'm a winner of "Engineering Ring" for the Best graduated student in Faculty of Architecture in Skopje for 2003/2004, from Engineering Institution of Macedonia, Associations of Architect in Macedonia
Accomplished professional with more than 6 years of rigorous experience in drawing preparation Architectural & Interior .
I am certified Engineering Professional in British & NFPA standards; experienced in Architectural; Electrical; Structural; Mechanical Design of building. Able to produce AutoCad Drawings & Design details
I CURRENTLY HAVE 3 YEARS EXPERIENCE IN DRAUGHTING FROM MECHANICAL,STRUCTURAL,ARCHITECTURE,ELECTRICAL,PIPING AND CIVILS.
Advanced skills in Autocad and Archicad, after working in many architecture projects
Hand-on experience on different EE areas including: PCB Design: covering RF/Mixed-signal/Digital board design for different wireless and wired applications System Architecture: RF system line-up/budget analysis and communication system architecture System Implementation: Altera/Xilinx FPGA-based embedded system development using Verilog/VHDL and C programming Project Management: time management skills for multi-task environment
It is a company dedicated to providing services in the areas of Architecture, Urban Planning and Engineering, particularly in terms of the preparation of studies, projects, plans, advisory, planning, coordination, management, general contracting and technical expertise. We have been preparing work in project areas diversified notably within the housing, trade, services, health, industry, tourism, housing developments, Urbanism design and art installations, to work in various locations. We follow the principles of quality and rigor, pledging to meet all deadlines established with the required competence in providing services of this nature, aiming at the personal contact and the satisfaction of our customers. Can consult our portfolio which contains many works produced and controlled by our multidisciplinary team. http://issuu.com/superflashstudio/docs/sfs_2013
? Responsible for building CAD drawings based on information provided by customers and engineers. ? Prepared plans, coordinated engineering, permitted submittal processing, bided and estimated. ? Knowledge of the drafting procedures and conventions. ? Good designing aptitude. ? Proficiency in handling computer, web and drafting software, Able to use AutoCAD and AutoDesk Inventor. ? Ability to express the data in technical report writing. ? Profound work experience of AutoCAD Draftsman at reputed organizations.
Over a decade of experience in architectural and related drafting using standard and custom dynamic block content.
I was trained in architecture, and I am skilled, motivated and creative in many aspects of design.
I have graduated from Saint-Petersburg State Aademy of Forest Technology. I'm holder of two degrees: in economics and managment (2008) and engineering of garden and park construction (2010). Since then I have been working in several architecture and construction companies in Saint-Peterburg and Moscow. My job responsabilities included work on the projecting of the Olimpic objects in Sochi. I'm experienced in park planting, managment and the use of some modern software programmes (AutoCad, Photoshop, 3D Max ets).
I received my Master?s degree, in Designed Objects, from the School of the Art Institute of Chicago and have a Bachelors degree in Architecture. I have interned for a theater company designing props and sets, have worked for an exhibition design firm, and as a studio assistant for a fibers artist. I have been working on several freelance projects, creating hand-made packaging for gourmet foods, conceptual furniture, and most recently designing toys. I have the ability to move quickly from concept to well executed design solutions through sketches, models, and investigative research. My abilities span an array of fabrication techniques including extensive training with adobe suite, 3-D modeling, and wood-shop experience. I am not afraid to try something new and can easily adapt my skills to meet the needs of any project.
I am an architect very dynamic, seeking to work in the field of 2D and 3D modeling. truly master the software: Autocad, 3DS Max, Revit architecture,lumion sketchup ,twinmotion and all arrchitectural project conception truly master the French language, English and Arabic. I am open to any proposal work, I would be very effective and serious thank you.
Im an Architect, along with my architectural professional work i can work on other areas of skills as well.
Designing inspiring solutions with social impact, we speak the language of community, culture, sustainability, and economy. We are social architecture-preneurs. We design communities + create culture. We are MIIM Designs.
I'm an Architect, I do architectural projects, rehabilitation and 3D simulations.
Revit 3D modeling and Rendering (Interior and Exterior), also AutoCAD and Revit 2D drafting (Architectural & Engineering).
I?m a CG and 3d architectural visualization artist based in Bosna and Herzegovina with 10 years experience.I?m very responsible towards their customers.I expect from my clients enough communication and a clear and detailed introduction to the job for which I am hired. I try to be sufficiently informed in CG industry, and each newly acquired knowledge to apply to my next job.
Architect with 9 years of experience in projecting building construction, design interiors and furniture, architectural 3d modeling and visualization. I am effective at multitasking, problem solving and offer professional service and advice. I'm also capable of making 2D detailed design and 3D presentations.
5th year architecture (graduted after 3 months) experience works ( africa , lebanon )
We are group of MSc in Architecture within 3 years of working experience in the field of interior and exterior design, as well in urbanism. Our advantage as a group is a possibility of quickly solving any kind of issue that you need. In order to introduce you to our past projects we can send you 3d models as well as photos of implemented interior designs. We are looking forward to colaborate with everyone. You are welcome to see a part of refferences in PRAGMArh's portfolio.
Designing inspiring solutions with social impact, we speak the language of community, culture, sustainability, and economy. We are social architecture-preneurs. We design communities + create culture. We are MIIM Designs.
Bachelor of Architecture (B.Arch.) Degree Pro-active and solution-oriented team player/leader Experienced in building designing Able to think analytically, critically, and conceptually Strong interpersonal, communication and writing skills Able to work under pressure in a fast-paced, constantly changing environment
I?ve been working in the Architectural and design field for about ten years. My previous duties have included drafting of construction documents based on schematic designs, researching documents and submitting plans for permits to the appropriate Jurisdictions. I believe I?m a viable candidate based on my background and my ability to adjust and become an asset to variety of Environments.
I am currently attending school part time studying Architecture My main career goal is to work in the Residential Architecture field. I have experience designing in AutoCAD, Rhino3D, and Sketchup Pro. My current short term goal is to gain work experience designing and modeling while I am taking Architecture courses in school.
Graduated BArch and MSc studies at Belgrade University, Faculty of Architecture. There I've gained skills in architectural, environmental, industrial, graphic design as well as in construction. From my second year of master studies she is part of Ecoist Creative Network and one of the leader of Green Schools project. Coordinated multiple workshops on ECOWEEK Belgrade 2012 and just successfully finished project for children theater play, where I was involved in all phases of project- from script writing and rehearsals to designing of promotional material. I never lacks in dedication to project, and always ready to push most of energy when is most necessary.
I have a degree in architecture I live in Algeria and I'm looking for work in the usa I speak english
We have a multi-disciplinary 3D draughtsman with experience in all fields who can draw up technical 2D plans and layout drawings for any field of work from quick client hand sketches to detail drawings that need to be updated. We can do all 3D work from plant design, structure detailing and architecture down to product design and anything in between. If digital renders are needed we am more than competent to make your 3D models come to life, not just as a visual aid but as a marketing tool as well. We come from a mechanical background so if you have a design issue, we can assist with the issue at hand. Lastly if you have an idea or a concept that has been dwelling on scrap papers or in the back of your head, we can make it come to life with either a quick digital visual model or a detailed working model.
Architecture is the first line that every job or business starts. It is important not only for freelancers but also for big companies which are interested in selling themselves before you see the product that they have to offer. Our team design office, home and interior space. Our ideas are for you to develop your expanse.
I am strong knowledge in autocad,revit architecture.i create many apartments in my country.
ItecDesignSofia Ltd. is a full service architectural firm with an altruistic motivation to provide innovative, award winning and sustainable designs for every client we meet. Our Sofia office opened in 2011, continuing an architectural practice started in Miami | Florida in 2004. We are proud of our proven record to produce cutting edge designs that combine our core principles of sustainability, functionality and aesthetics. Whether working with a residential, commercial or public client our goal is the same ? be adaptive to their needs while tenaciously seeing the project through to completion on time and on budget.
Registered Engineer with a bundle of capabilities and broad skillset. I provide architectural drafting and building design to people who are looking to build a new house, extend their existing homes or any other residential, commercial or industrial application. I provide feasibility report which based on different structural options of a project which also includes bill of quantities (BOQs) and cost estimation. I also provide structural design for established civil consultancy offices who are struggling to keep up with the work load.
hello.. i am an architecture student, good in designs, and make 3d views.. also good in drafting with autocad... i have a unique sense of design.. i am into film making as well, i can write storeis, screen plays, i am a good actor, cinematographer, art director, and a director...
Commercial Food Service Design, Auto Cad Drawings - Architectural and Food Service
Self Motivated with backgrounds computer science and architecture. 12 years AutoCAD experience. Courses in Autodesk Revit, Inventor. Do product design and rapid prototype modeling. 3D printer service available.
I'm a civil engineer working at a small company in Romania. We are a team of 3 people who can provide quality 3D Designs with Architectural and Structural drawings, and also high quality renderings. For architectural and structural design we are using Archicad 17 and Axis VM software which we own, and the renderings will be made with the use of Blender. We are very familiar with both the imperial and metric systems. We are a great team and together we can provide professional services at affordable prices.
Use my 30 years of experience translating client needs and aspirations into aesthetic, functional and cost effective architecture to enhance your firm's work. I have excellent written and verbal skills as expressed in my critically acclaimed books, papers and lectures on the relationship between individuals, cultures and architecture. I have an exceptional ability to collaborate with coworkers, consultants, government officials and contractors based on extensive experience in all phases of architectural projects. I have a good sense of humor and work well with others. I am licensed to practice architecture in the State of California. Read reviews and see samples of my work at http://www.anthonylawlorarchitect.com/reviews/ Resume available upon request.
A very skilled and versatile chartered landscape architect and urban designer with more than 30 years experience. He combines design flair and imagination to produce creative solutions, based on a sound practical knowledge of construction, site implementation and contract administration. He has a high level of graphic skills, both hand sketching, water colours and with a range of computer programmes, such as Photoshop, Indesign, 3d viz , Sketch -up. He uses CAD for both design and as an information system. He has an excellent knowledge of landscape architecture and urban design in arid climates and has worked in several ME countries and lived in Lebanon, Saudi Arabia, Egypt and Bahrain. He has also worked in Hong Kong and Brunei. Other skills include furniture design, computer graphics and general design skills.
We are two engineers with B.Sc. of Architecture and B.Sc. of Furniture Design experienced in Auto CAD, Archi CAD, 3Ds MAX, Adobe Photoshop ... We have over 10 years of cumulative experience in the business and many projects during the years... Spoken languages, Perfect English and Macedonian
My name is Bruno Madaleno and I am a Portuguese Architect. Since securing a master?s degree, I have spent the last three years developing my skills as an architect in Portugal. I have been participating in various 3d modelling, which helped us win the project for the world rink-hockey competition in Angola If you are looking for a person who is as good in architecture design as he is at 3D Modeling and Rendering, then we should get in touch. I look forward to hearing from you. Sincerely, Bruno Madaleno Portugal
If you want your job to get done without frustration, in high quality then i am your man. Civil/ Structural Engineer Consultant BEng - MSc - MIStructE - MICE Wide range of experience in the construction industry, having involved in civil engineering projects within the construction, architectural and designing industries from planning, setting out through to overseeing site works. Website: http://zafeiropoulosnikos.wix.com/nickzaf
we are a multi-skilled company specializing in computer aided designs from Product design to architecture designs to structural, civil design using specialized cad software in referent disciplines.
I'm an Architect who has graduated with a BSc in Architecture with Honors. I'm a quick learner, and I've had some hands on experience working for an engineering office in Bahrain; where I had excellent feedback from the team there.I also worked on several design projects during my internship; including development projects, master planning, designing a restaurant and a number of industrial buildings. Even within the relatively short period of the internship, I was made responsible for handling design projects and the completion of architectural drawings and plans. My responsibilities also included studying the feasibility of several design concepts, calculating the cost of materials used in the design and planning the overall master-plan of development projects. For more details, please refer to my portfolio. I've also put up some of my work on my online portfolio: www.issuu.com/rashadalirhayim/docs/issuu
I have an extensive background in Design using Autocad and other various Design Programs. Ive been involved in many areas of construction ranging from architectural to civil and mechanical. I have a total of 8 years of experience and I am still very active in the design and construction industry.
I offer detailed 3d models, that can start with just an sketch. With 5 years of experience, I dominate the use of Revit, including Revit MEP. I also can provide architectural plans and Renders.
Quality above all else.Exceptional attention to detail and well able to meet any design requirements.Good knowledge of architectural interior/exterior design with years experience in leading software. For the best deal , please don't hesitate to contact me.
Since 2004, We Green Des Lab expertise in Architecture and Civil engineering design and constructions, Infra structure project consultancies,Contracts,Structural design and Technical support. Established by R.Raj Nirmal B.Arch (Architect) R.Alagu Sundar, M.E (Civil Engr).
i like my job,and trying to do every task exclusively quality and good-looking. reaching the master degree of Architect of civil buildings,i try to broaden my knowledge in graphic design. So now i'm doing architectural and interior design with 3d vizualization. thanks)
I offer my client's the full range of architectural services - this may range from model building rather virtual or real. I can take any concept and turn into reality through drawing.
architecture design visualization
3D CADD Presentation Illustrations for Architecture and Engineering. Buildings/Construction- Exterior, Interior and Site Plan Views. Architectural and Engineering Products Illustrations. CADD Conceptual Plans- 2D & 3D, Plans, Elevations, Isometric and Perspective Drawings. View portfolio at www.DavidGurka.com
I own Lab Etc. Inc. I have a degree in Fine Art from Stevenson University and studied design for a year at Maryland Institute College of Art ( ran out of money) I invent things for animal research. I do architectural design.
Designer with 9 years of experience in Architectural interior planning and design. Services include project programming, budgeting, space planning, concept development, selection of FF & E materials and furnishings. All work is developed using AutoCAD Architecture, 3dmax (v-ray), 3d max design, Lumion, Chief Architect, Turbo Floor Plan, 3d Home Architect and Revit Architect. I am skilled in Best Planner 2d Drawings planing, detailed drawing, electric Drawing, sub mission Drawing, working Drawing, Steel Drawing, Plumbing Drawing, kitchen & Bath Detail, Exterior Plaza,Factory, Home, School, Restaurant, Office, Play Ground, Interior, Queen Room, Master Bed Room, Guest Room, Study Room, Children Room, Living Room, Media Room, Drawing, Dining, Kitchen and Bath.
Over 15 years Architectural background, CAD and home design
Surface Grooves is a design studio that offers laser cutting/engraving and other digital fabrication. Markets include restaurants, catering, retail, interior design, event fabrication, lighting, and architecture. We create a wide variety of products including lamps, invitations, signage, art installations, and new inventions.
The company primary focuses in Architectural planning and design as well as Mechanical and Electrical systems engineering, estimating, construction management and contract administration of for commercial, industrial and institutional facilities.
A Professional Architect with 8 years experiences. Have experiences in designing many types of buildings. Proficient in CAD Drafting and SketchUp Modelling.
Professional SketchUp Artist. Live Online Training Tutorials with Screen Sharing
20+ years in RF, RFIC, analog and mixed signal IC design. Last 9 years at FMD and Amalfi Semiconductor designing CMOS PAs for cellular applications. Previous experience in Intel, Bell Labs and Panasonic. PhD in Electronic Engineering. Fluent in Japanese. Over 40 patents granted with several applications in process. I have a wide and deep experience delivering IC solutions in the cellular space. My expertise covers from circuit and device level through systems and architecture level. I am very well versed in cellular radio specifications and I am able to translate radio specifications in architectures and system specifications and then take these to circuit level. I work well leading teams and as an individual contributor.
Certified in AutoCAD, AutoCAD Electrical, Autodesk Maya, Revit Architecture, Adobe Photoshop, Adobe Aftereffects. I am expertise in multiple disciplines , with work ethics and timed output.
3D architectural visualization artist
The Avant Firm is your source for technologies development,engineering, architecture, manufacturing, and marketing. At The Avant Firm we are diversified in a wide range of skills that allows for us to complete nearly any job for our clients today.
Highly focused and efficient computer engineer with PhD degree and twelve years of industrial experience in Hardware development. Also have seven years of Academic experience in research and teaching. I have extensive technical and leadership skills that cover most hardware development life cycle including: performance modeling, high level architect, micro-architect, logic design, verification, emulation, and post silicon validation. I have very strong programming skills. I Published and reviewed several scientific papers and filed Patents. I have ability to work well under pressure and to quickly acquire new skills. I have excellent interpersonal and teamwork attributes with superior ability to communicate effectively in both vocal and written manners. I am friendly and outgoing. I build relationships easily and am generally quite comfortable in a role that requires a fair amount of interaction with other people and relationship building.
Hi all, am an architect graduated with a major in architectural design in the past 3 years I have specialized in architectural visualization as well as also 3D modeling of objects. Work carried out quickly and quality projects.
Over 20 years work experiences with reputable architectural and engineering firms. Can handle projects with minimum supervision. Hardworker and a TEAM PLAYER
I am passionate of architecture and design. I?ve graduate The University of Architecture and I have 3 years experience in the field. I am also very interested in green architecture and I?m always searching and learning about sustainability, self-sufficient buildings, new ways to design buildings using natural materials which has no negative impact on the natural environment.
I have been working in the construction estimating field for over seven years. I attended the University of Central Florida and majored in Civil-Construction Engineering. During school I worked as an intern at a civil engineering company as well as Orange County Utilities doing design research. Shortly after graduating I worked as an estimator for a large general contractor. I have worked on everything from earthwork, mechanical, plumbing, architectural, concrete, and process piping. I have also worked as an estimator for an equipment representative. Working at every level of the construction project has helped to mold me into an excellent estimator. Even though most of my work has been done in the mechanical, plumbing and structural I am also able to estimate every other portion of a construction project. I look forward to building a good working relationship.
Arrant Engineering Solutions is a global outsourcing partner and specialist in technical services provider. We offer a complete range of engineering solution across key technological trends and functional domains to help our clients to maintain a competitive edge in their respective markets. We provide full-spectrum support to benefit our clients in shaping technological landscape for IT & Software, Product Design, Manufacturing organizations, Architectural & Construction. We customize our services to meet your business and project goals. In the IT & Software industry, we provide software support in Business Application Development, Website Design, Tool Design, e-Learning and Graphics Design. In Product Design & Manufacturing organizations, we support from Concept Evaluation, Analysis, Production Drawings, Process Planning, Simulation, Jig, Tool Design and Technical Documentation. In Architectural & Construction industry, we support design(Preliminary and Detailed) and construction.
Welcome. My name is Simon Jackson, I am a British degree qualified multi-skilled designer with 10 years experience, currently focusing my career developing products for construction, lighting, utilities, infrastructure and specialist purposes. My work encompasses industrial/product design, architecture, engineering, advertising and everything in between. I am based Dubai, in the Middle East and work globally, and have good manufacturing links for you in China, India, Dubai and the UK. I have a passion for engineering, design & particularly sustainable design. My general area of expertise is design and development of hardware for Out-Of-Home media, Street Furniture, Interior and Exterior Lighting and all Architectural Metalwork and I have vast experience in bringing products to market from conception to manufacturing and commissioning. Key Projects Worked On: Dubai Metro, UAE Pearl Doha, Qatar World Central Airport, Dubai, UAE Commonwealth Games, Delhi, India
"In Studio D? LTD is an architectural and design company, based in Sofia, Bulgaria. The company was established in 2009 by Desislava Doneva and Roumen Donev. The scope of activities of ?In Studio D? LTD, covers all aspects of architectural design, planning and interior design. We have experience in the design of residential and office buildings, and also in reconstruction of existing buildings and interiors. ?In Studio D? LTD works with a team of experienced engineers and architects, and our work is based on pursuit of quality. With our experience based on more than twelve years of practicing architecture profession and the design of numerous residential buildings, mixed use buildings and interiors we are capable of providing full and quality cervices in the field of architecture and interior design. For more information about our work please visit our web site at: www.instudiod.com.
Un ind?pendant, professionnel tr?s exp?riment?, qui est capable de fournir des services d'architecture et de design ? prix abordable avec un d?lai d'ex?cution rapide, ...
I'm a lighting design engineer with 14 year experience. My specialities are sports lighting design, architectural design, landscape lighting design and street lighting design.
Graduate of BS Architecture on 2008, Have an apprenticeship in about 2 years using AutoCAD until now, know how to operate 3D's Max software for modelling and rendering also know Sketchup (basic) and a little in Photoshop.
- All around Embedded Systems Engineer who can develop products from the ground up, with experience in PCB, firmware and software design. - Gained experience with several fields including aerospace, automotive/Formula 1, consumer electronics and utility companies. - Designs and races formula cars, thorough and competitive.
have set up my own Architecture firm. It's called WorkRoom Architecture studio.I have great skills in the areas of AutoCAD and Building Architecture due to my past experience working as a AutoCAD Designer and Building Architecture Designer. I am looking to be outsourced by you for your jobs so I can bring my skills and experience to you. If given a chance to be part of your team I will work best and bring in the required output.
Tekno Engineering Consultants,is a consulting firm, providing services to the construction and engineering industries. Our services includes residential buildings, office buildings, institutional buildings, row housing projects ARCHITECTURAL: 1. Planning of related infrastructure utilities such as the roads, water supply, sewerage & drainage. 2. Planning and Control. 3. Housing layouts & New Housing Development. 4. Site Analysis and Selection. Cost Estimation Services : 1. The Best Services from the highly qualified Professionals, giving Project most accurate estimates. 2. The engineers at TEC have technical knowledge and experience to go an extra mile for getting the in-detail analysis on your input of, 2d drawings or blueprints and provide construction cost estimates. 3. 3D views and walkthroughs. 4. Personal interaction with the Clients by our technical experts, giving insights on the quality materials with the appropriate cost control methods.
I am a Professional Graphic Designer with more than 4 years of experience in the designing industry. I have excellent designing skills. I am well versed in the creative designing of Logos, Flash Graphics, Brochures, Posters, Flyers, Magazines & other graphic works. More on this, I'm Dedicated, Creative, Result Oriented & having very good communication skills & 'Can do" attitude which I believe are necessary for this industry. I am confident that my work experience has prepared me for making an immediate contribution to develope a great brand for your company. I understand the level of professionalism and communication required for long-term success in the field. I've worked for diffrent industries situated in different countries while I got repetitive work from most of the clients.
Mateusz P, Architect, 3D modeler and CAD expert, practicing in Architectural, Sustainable and Graphic Design, preparing Building Concepts, Documentations & Presentations with skilled use of CAD and 3D applications together with mixed-media graphic applications. 8 years of professional experience.
My company specializes in manufacturing design. We offer a wide variety of technical solutions, including manufacturing and producibility reviews on design packages, performing estimates to build on design packages, providing AutoCad drawings, reverse engineering projects, Bill of Material Development, Time and Motion efficiency studies, PLC programming, and a variety of technical consulting.
Will Hurd has spent many years solving problems and he believes that your problems - be they physical, social, or cultural - have an effective and sustainable architectural solution found through a thoughtful and collaborative process. He started footprint architecture & design with the mission to effectively reduce our impact on the environment through thoughtful and collaborative design solutions and education. Working with the community, Will Hurd seeks to make every building in New Castle County carbon-neutral by 2030 and net-zero energy by 2050.
My Name is Nazayar Abbas.I am post graduated in MBA .I have experience 5 year as a Interior designer.I blend traditional and digital methods to create illustrations that help clarify design concepts.As a self-employed illustrator I am fortunate to work with many clients,on a broad range of projects.Designer/Architectural Illustrator, Self employed 2007 to present.Assist clients with their visualization needs by creating concept sketches, final renderings, or CAD models. Render floor plans, site plans, elevations, and perspective views of: interior and exterior residential and commercial properties, renovations and new construction, stage sets, and marketing promotional events.I have also Knowledge of Auto Cad 2008,Google sketch UP Pro,Microsoft Office 2007,Adobe Photoshop,3ds Max,Coral Draw,Page Maker,etc.
CTE was started in 1985 as an Auto Glass co. and then added a design component in 1995 after training at Sierra College with AutoCAD. The glass co. was shut down due to a bad economy and pushed the design aspects of the company to the forefront and started working with architects and builders. AutoCAD was the perfect fit given the ease of document control and production and we have never looked back. Currently we teach AutoCAD and pull permits for manufactured homes as well as some architectural and mechanical design.
A young architect with 8 years full time experience. SKETCHUP and AUTOCAD are my specialty. Quality and speed are my ideals. Recently completed an Autodesk certified REVIT course. I am computer savvy and taught myself and many colleagues how use Sketchup, render photo realistic PERSPECTIVES and edit through PHOTOSHOP. I am a dual citizen having both USA and Philippine passport and can travel easily if required. I have been part of design teams assigned to design Hotel, Condominiums, Villas, Commercial malls, Hospital among others.
I am a Quantity Surveyor registered with the relevant Professional body in Kenya (Board of Registration of Quantity Surveyors and Architects). I have acquired a rich experience in the field working in different Quantity Surveying firms and contractors, handling a vast number of projects ranging from office blocks, hotels, industries, learning institutions and civil works. I pride myself in my ability to undertake any task efficiently and accurately through utmost dedication and diligence.
We are new to Elance, so people generally asked about experience and quality of work. It is a valid question, but if you refer our portfolio, it represent our awards and publications. We can give you guarantee that our work will help you to complete project in very perfect, efficient and proficient manner. Our tem is made up of 5 architects with more than three years experience in the field of architecture and interior with 2D-3D designing, draftings and realistic render quality works.. we have the best and widest experience in the field of architecture which include residential building, townhouse, apartment; mixed used buildings, warehouse, office spaces, specialty stores, furniture shops, malls, cinema, food court, kiosks and carts design and also eperience with Interior of bedrooms, kitchens, dining, retails, showrooms, restaurant, atrium, food zones etc.
In a society that is saturated with goods and services of all kinds, quality becomes to be a recognizable supplement that must fulfill all your requirements. As an architect with experience in various fields such as urban design, master planning, architecture, interior and industrial design, I can offer you exactly those services that you are searching for. During my work experience I have gained knowledge in programs such as AutoCAD, ArchiCAD and Google SketchUP, or in 3D platforms such as Artlantis Studio and Lumion. My skills permits me than to complete my offers as I can enhance your material in Photoshop, make your diagrams in Illustrator or finish your panels/presentations in InDesign. Architecture practice is something that I love, but most of all I love to work on your projects: as a full motivated hard worker I can assure you full commitment to your needs, loyalty and professionalism during our fruitful relationship. Quality service for a fair price is my motto!
As an Assistant Architect and Interior Designer, I was involved in Site Analysis, Design Conceptualization, Design Development & Presentation, Meeting with Clients, Preparation of BOQs and contractual Documents, Construction Supervision and Site Coordination.
I have been working on 2D and 3D CAD drawings for over ten years now. My experience ranges from architectural, interior design, civil engineering and manufacturing designs. I provide professional, on-time and accurate drafting services. I aim to deliver more than is required of me in less time. I am passionate about what I do and nothing gives me greater satisfaction than knowing I have surpassed expectations.
As a top graduate from one of the leading architecture schools in the midwest and current intern at a local architecture firm that heads the state in School Design I would like to extend our wide range of services to you. Gleisner & Partners LLC offers the adaptability, flexibility, skill set, and insight needed to complete your project under budget and with time to spare. Honest business and a strong work ethic is offered along with highly tuned organization skills, uncompromising detail, and aggressive implementation of goals with reliable quality, generative speed, and creative versatility. As always, we appreciate your time and consideration, David S. Gleisner
Arthur Cotton is a global consulting group providing expert, sustainable, ergonomic & integrated solutions to meet the planning, engineering design (both initial and detailed), project documentation and cost engineering needs of four principal market sectors, Geographical Information Systems (GIS), Infrastructure, Transportation and Engineering Design Outsourcing (EDO). Also, we have good knowledge and experience in the following services: RAMS Analysis, Ergonomics / Human Factors study and design, System Architecture Diagrams and Design/Project Documentation
We offer most comprehensive CAD Drafting Services for Architectural, Structural, HVAC, MEP and HVAC. We are an offshore service provider of CAD drafting for Floor Plans, Elevations, 2D Drafting, 3D Modeling and PDF to CAD Conversions. We have team of 40+ highly skilled drafters, architects and engineers who work closely with the clients to draft CAD designs.