Freelancers

Freelancers by Skills

1-100 of 101 Professionals
Freelancers
Expert CDMA/GSM/UMTS BTS/BSC

7.1 years of extensive experience in Telecom industry including all aspects of Technical Engineering and Administrative functions covering office and personnel administration, project coordination and Operation and maintenance, system planning and implementation. Worked with various telecommunication companies (i.e. Reliance, Alcatel Lucent Managed Sol) under hugely acquired project implementation indenture primarily from Roll-out, Turn key up to Operation and Maintenance (O&M) activity. Performs supervision of GSM/WCDMA/LTE/EVDO (BTS/DAS and BSC/RNC), along with related Logistic operation activities

India, Madhya Pradesh, Indore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

As services engineer in Ericsson, perform following key activities. BTS's and NodeB's rehoming, IuPS and IuCS configuration, integration of WCDMA / LTE nodes, implement LAC/RAC redesign. Previous position at Huawei, Wireless TAC Engineer (Technical Assistance Center). From main responsibilities: troubleshooting hardware and software problems/issues on live networks, SPOC for several customers from Europe and Australia, NodeB/RNC features deployment. Installation and commissioning of telecommunications equipment, BSS (BTS, NodeB, BSC) and transmission (microwaves, switches, routers, etc.); Multi-Technology troubleshooting skills: GSM, WCDMA, LTE and CDMA 1X & EV-DO; Multi-Vendor & Multi-Technology experience on several customers on following projects: - Orange Switzerland (OCH) project; - Hutchison 3G (H3GIT) project; - Telenor and Tele2 Sweden project; - Datame OyFinland project; - Telekom Romania project; Multi-Vendor experience: Huawei, Ericsson, Nokia-Siemens (NSN), ZTE, Alcatel

Romania, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Wireless Engineer

Wireless Physical layer modeling and Simulation. GPS & GNSS simulation. UMTS, LTE, CDMA Networks Scientific Computing: MATLAB, C/C++ Programming, Mathematica & Maple.

United States, VA, Ashburn | Engineering & Manufacturing | Rating 0.0 (0 reviews)
DSP specialist for Wireless/CDMA/BaseBand

DSP, Matlab, C , RTOS , Wireless applications, 3G, CDMA, physical layer and radio interface . Development and implementation of Sw in fixed point, , RTOS and in target harware , Simulation of algorithms in Matlab for feasibilty study. I was earlier a Senior Specialist ,BaseBand technologies at Nokia Networks , Finland.

Finland, Southern Finland, Helsinki | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Experienced RF Engineer with expertise in radio network planning, rollout as well as optimization. Experienced in Ericsson and ZTE equipment. Expert at maintaining network KPIs and resolving radio network issues.

Kenya, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Wireless and Network Engineering

Electrical and Computer Engineers specializing in Wireless and Network Engineering for Telecommunications projects. Combined we have 10+ years experience in the Telecommunication field and 15+ years in the Machine Learning field.

Canada, Ontario, Beeton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF Systems & Sub systems Manufacturing

Company having an experienced Engineers in the area of Manufacturing RF systems and Sub-systems used for Mobile,Telecom,Satcom,Defense and Railway Sectors. Engineers having good experience from the past 25 years in RF,Embedded and VLSI sectors. Includes in the design and implementation of Mobile Reference platforms and evaluation, Satellite earth station systems and subsystems, VHF handheld and mobile radios, Qpsk/Bpsk transceivers, 30-Channel UHF radios. Apart this experience in the Telecom and Defense RF cards repair. Capability of test and measurement instruments like Scalar & Vector Signal Generators, Network analyzers, signal analyzers,CRO, Anritsu/HP Call Box, Noise source and spectrum analyzers with profiles used for GSM,C2K,WCDMA and LTE testing.

India, Delhi, New Delhi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Post graduate electronics student looking for work

I have a Bachelor's Degree in Electronics and Telecommunications. I am currently attending the research based Master's Degree programme Signal Processing and Computing at Aalborg University in Denmark.

Denmark, Nordjylland, Aalborg | Engineering & Manufacturing | Rating 0.0 (0 reviews)
assistant of you

iam new of this site if any custmor tell any work i do my best

India, Andhra Pradesh, Ongole | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Specialist IP Routing&Switching, Security

Young Professional Electronic Engineer, expert in Networking IP Routing&Switching, skills in security. CCNAS ™ Certified CCNA R&S ™ Certified

Peru, Arequipa, Arequipa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

Expert in computer programming and can easily handle any electrical engineering problems.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Interested to be an active member in the field of communication, networking, control systems and electronics where my academic background and skills may be used. In addition, seeking for a respectable position in a well-established organization that utilizes and further develops my interpersonal skills.

Egypt, Al Jizah, Gizah | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Ms in Automation & Control,Ms in Electronics Eng

I did Master in Automation and Control engineering and Graduation in Electronic, serve as Research Scientist from 2010 in PCSIR (Pakistan council of Scientific and industrial Research), and also serve as trainee engineer in CARE (Center for advanced Research engineering ) for two year. Expertise in, Micro controller, Embedded System , C++, Students projects, VHDL, DLD,electronics, Mat lab simulation, Proteus, Digital Electronic. Control System, Renewable Energy, Calibration, Technical Procedure for laboratory equipment's,

Pakistan, federal, islamabd | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

My name is Onwuka Kenneth,a graduate of Electrical Electronic Engineering from the University of Benin Edo State Nigeria.I started my career with a general engineering firm in which I was made a site officer.I am a fast learner,proactive,can wirk with little or no supervision. I love new challenges because it motivates me to work.

Nigeria, Lagos State, Lagos | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

SDS will help you select the best antenna for your system either an off-the shelf or a custom design.

United States, CA, Lake Forest | Engineering & Manufacturing | Rating 0.0 (0 reviews)
all electronics and electrical engineering skills,

i am final year electroncs and telecommunication engineering student.

India, maharashtra, parbhani | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF and Antenna/Electronics design, com-study's

+25 years of RF and Electronics design, in building RF coverage DSA / BDA /Tunnel Systems. Design and Prototyping of Electronic devices. Specialized in Public Safety Communication.

United States, FL, Fort Myers | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Highly experienced in hardware/firmware design, PCB design - from concept to manufacture. Programming for PC - C/C++

Bulgaria, Sofia, Sofia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

i was born in 1990,in wuhan hubei province,iam a medic student,iam good at hepatic sergury,and I like electronic products in my personal life time ,so not only I can provide health advice ,I can repair any iPhone or other apple products,I can repair computer as we'll.

China, Hubei, Xiaogan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PCB Designer

As an employee I put honor in to be precise and detail-oriented, while maintaining good quality of work. Ihave been told that I am trustworthy, responsible and quality minded, which I strive to maintain. I have 9 years of experience in PCB Design, Soldering SMD and Hardware Testing. I have 2 years working and make good quality equipments (design PCB, soldering and testing prototypes) at http://www.rockna-audio.com/products/wavedream-dac http://audiobyte.net/products/hydra-z http://audiobyte.net/products/black-dragon

Romania, Ro, Suceava | Engineering & Manufacturing | Rating 0.0 (0 reviews)
ASIC and FPGA developer with 30 years experience

Highly skilled expert with leadership and hands on experience developing ASICs and FPGAs throughout the entire flow: Architecture and specification, micro-architecture, design (RTL, Verilog and VHDL), debug, verification, DFT, synthesis and timing closure, formal verification, prototyping and emulation, interfacing with physical design groups, COT and foundry service providers, and silicon bring up and interfacing with hardware, software and application groups. Led or participated in the design of dozens of ASICs and FPGAs, mainly in the area of wired and wireless physical Layer communications and DSP, image processing, video compression, low power applications, CPUs and more. Worked in diverse groups and environments for numerous large companies, as well as start-up companies. Broad and deep knowledge of most (if not all) industry standard tools and flows. Driven self starter individual, fast learner, team player, experienced in building groups and companies from the ground up.

United States, CA, Cupertino | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Radio Network Planning and Optimization Engineer

I am working in telecommunication field since last 7 years. My major role is Radio network planning and optimization for GSM and WCDMA networks. I have skill for radio network planning for GSM and WCDMA. Have knowledge of tools used in telecommunication for Network planning work. Addition to this i have knowledge of some microwave los planning and WiFi planning. I would to ensure the given work to be completed in diven time deadline.

Nepal, null, Lalitpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Currently I am doing B.E final year in electronics and telecommunication . I am a person with full of enthusiasm to learn new things and my interest is in telecommunication. I am very fast learner , determined and flexible person.

India, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am Engineer Samuel Nkata, a telecommunications professional, vast in managed service network operations, i have a bachelor of technology degree in Industrial physics(majoring electronics), i have a working experience of almost five years in the telecommunications industry, i have worked on many projects and solutions for big mobile operators,a formidable team player and adherent target achiever, i believe i will be of immense support to the personal business commitment of your organization

Nigeria, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Hi I am arun basically a telecom(4G) engineer. I am very much dedicated to work and well determined.I have set aside overall 12 hours for working.My aim is to accomplish the given task at faster rate with great accuracy.I always wish to learn new things and new technologies that should be an innovative.I use to put 100% effort in all my jobs.

India, karnataka, bangalore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Need an Engineering writter? You got it!

Mechanical Engineer with over 3 years experience in Teaching , Book Review, Lab Report writing and use of computer applications such as MATLAB & Simulink, Auto CAD, PSpice CAD, Excel Solver and VBA programming.

Kenya, Kenya, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics & Telecommunication Engineer

Hi, I am Vinayak Haryan. I am Electronics & Telecommunication Engineer and also done diploma in Industrial Electronics from Mumbai University.

India, Maharashtra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Actually am an electronics engineer. But really interested in data entry and I know the value of time.

United Arab Emirates, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF Design/Modeling/Analysis/Measurement System

Over 30 years hands on experience in the field of RF and Microwave design, both at circuit board and systems level. Integration from conception to testing of the installed product, including measurement, verification and implementation, hardware integration, and development of test, measurement, and analysis software.

United Kingdom, null, London | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded devloper

i have 5 years experience in embedded field.i am working in product based company. i have knowledge about Operating Systems: Android, Linux, windows Compilers: IAR,Keil,Ride,Eclipse,Mikro c,MPlab etc. Protocols TCP/IP, UDP,CAN,I2C,SPI . STACK: uIP TCP/IP STACK, ZIGBEE STACK. WireLess : rf card, nrf905 , mrf89xam9a , zigbee cc2430 , bluetooth wifi. Processors: 8085,8086,8051,lpc2148,lpc2378,lpc2129,lpc2292,lpc2468,at91sam9263,Pic 16f,18f,32f series.

India, tamil nadu, chennai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have efficient and professional experts in each of the fields of web development and thus, I am dedicated to address and solve your individual needs. I always keep in mind that the services that I provide get proper and effective attention that it deserves. I value your work and refine it until you are completely satisfied. At every stage of the development process, right from design to product release, I maintain high quality standard in keeping your opinion. I also offer extensive communication facilities through which I can always stay in touch with you.

India, Gujarat, Rajkot | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Actively seeking entry-level full-time employment

I graduated with an MS in Telecommunications from Southern Methodist University, on May 17, 2014. I am looking for a full-time opportunity in a company which would help me further my knowledge in the field of telecommunications. My immediate goal in life is to acquire adequate knowledge in the field of telecommunication engineering so as to enable myself to work efficiently in the industry. In the long run I want to become a successful engineer, equipped well enough to contribute to the larger community. Having done rigorous groundwork in both theoretical and applied electronics and communications, now, I am in a position to step into the field of the telecommunication industry. Being extremely hard working, coupled with ambition, my long cherished dream to be a researcher will be realized.

United States, TX, Dallas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Engg. & Certified CCNA and MCP .

I am a B.Tech (ECE) from the prestigious Punjab Technical University and have been certified as a Network Engineer (CCNA) by Cisco, USA and as a MCP, by Microsoft, USA. I believe that my qualifications, along with my drive and enthusiasm, make me an excellent candidate for employment. I have secured above 60% throughout my educational journey. My proficiency in English, as well as my knowledge of Networking, working with the Windows OS and MS Office, complement my qualifications.

India, Karnataka, Bangalore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

An Electronics Engineer, Having experience of PCB designing, Solar Installation, Production Engineer in PCB Assembly department. DipTrace, OrCad, Altium, BluePrint, Cam350, Solar Inverters,

Pakistan, null, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Freelance telecommunication Engineer with degree in Electronic (computer) engineering. Experienced in preparing Technical Report by using appropriate software during my job.

Malaysia, Wilayah Persekutuan Kuala Lumpur, Setiawangsa, Kuala Lumpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have 6 years of experience in Telecom Industry as Radio Frequency Planning & Optimisation Engineer. The BSS Radio Access Network is the area of expertise.The skills mentioned can be looked at.

India, U.P, Ghaziabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
embedtrion

we are professional , engineering service provider with product designing including MCU programming android ARM processor based designs linux

Pakistan, punjab, Rawalpindi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Communications Engineer

I have a 1st class Masters degree in Electrical & Electronic Engineering, and am currently working on a PhD in Communications Electronic Engineering at the University of Bristol. I also have several years industrial experience in all aspects of product design from specification to verification including schematic design, PCB layout, writing firmware and designing appropriate test equipment.

United Kingdom, Avon, Bristol | Engineering & Manufacturing | Rating 0.0 (0 reviews)
thinking ahead

Working as specialist for transport and ship launch. Solving design problems is my obsession.

Croatia (Hrvatska), Croatia, Rijeka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
MS Electrical Engineer

To associate myself with an organization that has the potential for future growth and ample scope of learning. I would be able to deliver the best of my knowledge and utilize the skills and implement and contribute towards the new technologies

Pakistan, Punjab, Chakwal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in LTE and UMTS protocol testing

Having good experience in the LTE and UMTS telecom domains where I have worked on S1-MME, S1-U, S6a,IUPS interfaces in core network. Also worked on UE conformance testing Layer2 (RLC)of UMTS devices

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

To put my technical knowledge to its practical application and pursue a career that provides proper utilization of my skills in company’s profit and simultaneously undergoing through the process of self-development.

India, Uttar pradesh, Varanasi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Country Manager & European Disty Manager

Very "Semiconductor's Industry oriented", I have the feeling I may fit to majority of other criterias (Technical knowledges for a better understanding of Industry' requirements, European and France Disty Manager as I already did it in the past, OEM's approach, Sales & Marketing minded, P&L, ROI, Turn Over, HR and CRM management,...) and as since a couple of years I'm now much more Sales/Mktg and Customer' Management oriented (Key accounts and Distributors/Retailers). Since 25 years now, I've roughtly been in deep touch with all industy' domains from small Mass Market customers up top internantional OEMs.

France, Ile de France, LE PERREUX Sur MARNE | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have got 25 years of experience in Electronics / Embedded System architecture and development. I have served customers from India, Italy, Japan, UK and USA.

India, Tamil Nadu, Coimbatore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
DESIGN , PLAN, AND DRAFT YOUR PROJECT

Freelance Architect, Designer Construction Manager Web Designer Drafter and Remodeller

United States, GA, BUFORD | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Smart Engineer

I am a guy with good logical and analytical skills.I like to work at anytime.I am self starter and interested in learning new things.I like to solve problems in a different way.

India, Maharashtra, Palghar | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Telecom test engineer

Have working experience for almost 7 years and have knowledge on tools like agilent anite spirent, aeroflex rns anritsu etc .

India, Madhya Pradesh, Indore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Project Designer, Technology Policy advocate

? Design and Supervision of Electrical & Electronics Engineering projects using software tools such as AutoCAD, PSPICE, Electronic Workbench etc ? Planning, Design & optimization of PDH/SDH Microwave Radio Transmission links and systems, Basic Fiber optics equipment planning and GSM/EDGE/3G/WIMAX RAN planning & optimization Design, implementation and optimization of Hydro-Electric, Thermal and Hybrid Power systems and networks from generation to transmission & distribution. ? Technology Policy reform analyst, advocate, contributor & development specialist. ? Training & Development needs analyst and adviser.

Nigeria, Plateau/ North-Central, Jos, Plateau State | Engineering & Manufacturing | Rating 0.0 (0 reviews)
graphic designer

i am a computer science student and interested in designing and need some amount so that it will be helpful for my studies

India, Tamil Nadu, Salem | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

A results focused engineer specializing in microwave network design to include transmission engineer and system engineer with a proven track record of accomplishments as a program/project manager, engineer team manager and engineer. Self motivated with a consistent history for producing quality work, exceeding objectives and meeting timelines. Strengths include problem solving, technical expertise, presentation, training, and team building.

United States, TX, Frisco | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

12 years experience in design of electromechanical systems

United States, PA, Philadelphia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Iam an electrical engineer at National University Of Sciences and Technology Pakistan

Pakistan, Punjab, Rawalpindi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Strong knowledge about Electronic And Telecommunication, Experience on ericsson equipment in NSS department of Warid-Pakistan. In addition strong knowledge of NETWORKING. going to attempt CCNA in december 2014.

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical and Microwave Designer

Twelve years of academic and professional experience in Electrical and microwave engineering and process optimization of millimeter wave technologies. Proven track record in identifying problems and developing innovative solutions in designing process. • Exceptional attention to detail, adherence to standards and technical background. • Strong technical and methodical aptitude with an innate ability to analyze, coordinate and synthesize data. • Highly skilled in planning and analysis with key strengths in project management. • Performance Test Simulation/Verification

United States, CA, Irvine | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am bachelor degree holder in electronics and communication engineering, Currently I am working in Oman as control system engineer. I would like to work on free times.

Oman, Kerala, Kannur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am an electrical electronic engineer with vast knowledge and working experience having worked as a transmission engineer with a broadcasting station here in Nigeria, Africa and i am an expert in ICT / TELECOMMUNICATION consultant with years of work experience. my clients are given 100percent excellence with credible results because i am solution driven.

Nigeria, Federal Capital Territory, Abuja | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

HI..i have a great knowledge about the adobe Photoshop, illustrator and computer skills and also i finished B.E in electronics and communication engineering.

India, Tamil Nadu, Kanchipuram | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Wireless, Electronics, Sensors and Firmware

Over 20 years experience developing and testing products from concept to manufacturing. Technical expertise includes portable and mobile, wireless radio and antenna design (CDMA, GSM, Bluetooth, Wi-Fi, RFID, Zigbee, etc.), analog and digital electronics and controllers,firmware (C languages), optical and electronic sensors, lasers, fiber optics and IR instrumentation, power supplies and converters. Applications includes commercial, industrial, automotive and aerospace products. Products are designed and tested to comply to FCC, UL, CE and FDA standards. Tools include, Altium, Solidworks, FEKO, FEA and CFD analysis.

United States, CA, Manhattan Beach | Engineering & Manufacturing | Rating 0.0 (0 reviews)
GSM RF ENGINEER

• Over 15 years of experience in Cellular companies, 2G RF Engineering, Optimization, Cell site planning, RF Design, Drive Testing, Data Analysis, Data collecting, RSAT Drive testing etc. • Experience in Ms Office such as, Windows 8, Windows 7, Window Vista, MS word, MS excel and knowledge of LAN and UNIX. • Capable of using sophisticated radio test equipment like Stabilock (4001), Spectrum Analyzer and IFR 1200 SA Communication Test Equipment. Can computer simulator programs designed for Motorola -GSM.

Canada, Ontario, Etobicoke | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have over 20 years of RF/Analog circuit design for high quality military products as well as low cost high volume products. I also have over 10 years of experience in communications systems engineering for products CATV markets as well as for Cellular Distributed Antenna Systems.

United States, OH, Olmsted Twp | Engineering & Manufacturing | Rating 0.0 (0 reviews)
inspired innovation

we are dealing with product development along with that we have expertise in embedded system.Due to that we have defense clients

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF Microwave Electrical Engineer

I am an experienced RF/Microwave engineer. I have expertise in RF system design, antenna design, PCB layout (RF and analog), MATLAB, HFSS, C/C++. I have designed radars and high performance radiometers, RF receivers, transmitters. I also have experience with PIC programming.

United States, AL, Madison | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Software Academy

Over 10 years of experience with different software for engineers. service provider on Elance and offers complete end to end software design, programming, consulting and maintenance services. We have a team of 20+, with strong programming team. Group of coders working with MATLAB Telecommunications engineer with more than 10 years of experience working , performing tasks such as image processing, voice, radar system simulation, statistics, mathematics, pattern recognition and classification, ANN, GA, PSO, PCA, features extraction, GUI, Mobile app. using android wireless communication via matlab (BER, Diversity, MIMO, WIMAX,...)

Jordan, IRBID, IRBID | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineering, Embedded Systems

BSEE, MSEE, Embedded Systems, Product Development, Computer Network, Audio Visual, Physical Access Control

United States, CA, Eastvale | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Telecommunications Engineer with MBA

Telecommunications engineer with MBA, have more than 7 years of experience in Presales area, including: technical proposal writing/design, SOW answering, bidding support, team building and coordination, translation Spanish/English and English/Spanish, collaboration with Key Account Managers in creation of business cases and business plans. Technical areas: cellular networks (GSM, CDMA, UMTS, LTE), Value Added Services (SMS, LBS, VMS, Surveillance, MMS, WAP, Video-conference). Actually looking to collaborate in projects in related areas, to add value based on experience and knowledge.

Venezuela, Distrito Federal, Caracas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert cellsite technician

I am a telecom technician with experience in Telecom Wireless Industry (GSM, IDEN,CDMA) and I am CISCO Certified - currently held certifications: CCNA (Cisco Certified Network Associate) CCNA VOICE (Cisco Certified Network Associate Voice) CCVP (Cisco Certified Voice Professional)

United States, NY, Mount Kisco | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Adaptable, organized, self-motivated Lead Hardware Engineer with expertise in design & development of reference designs & products, mass production & test support, project/team leadership. Experienced in wireless baseband areas of digital/analog circuitry, power management, audio and various control & communications interfaces. Focused on creating re-usable designs to improve engineering efficiency in small startup team or part of large cross-functional organization. • CPU, Memory, Display • Power Optimization, Battery Management • I2C, USB, Audio / I2S • MIPI D-PHY, HDMI • CDMA; 2G/3G/4G LTE • Camera, Touch panel interfaces • Schematics, Board Design • Test & Debug • VBE/Excel • Certification Preparation • Project Leadership • Team Development • Mentoring • Customer Support

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PLC programmer, web developer, technical writter

I am Electrical and Electronic Engineer from Bangladesh. Last five years I have been working on industrial automation system, web development, technical blog writing, electrical power system modeling and simulation, micro-controller based intelligent system design, power electronics, application of AI in power system especially integration of renewable energy sources to grids line for optimal efficiency etc To potential clients, you are welcome to hire me on different projects on electrical & electronics engineering, technical blog writing and web based services and my objective is to offer you quality and unique service at my best.

Bangladesh, Bangladesh, Chapai Nawabgonj | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Embedded system professional

Versatile R&D professional with 5+ years experience in conceptualization and development of microprocessor-based products and solutions. Specialized skills in Automotive domain software Development , Process Control, Home Automation Systems, Industrial Systems. Diverse experience in solving Automotive software problems for various OEM's in India, and across the borders.

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 5.0 (6 reviews)
Telecommunication Engineer with experience in O&G

Telecommunication Engineer with 10+ years experience in IT and O&G Companies, designing and installation of the following Telecommunication Systems: LAN, WLAN, CCTV, SDH / PDH/ IP Microwave Radio Links, Trunking Radio, VSAT, PA/GA, Structured Cabling, Fiber Optic, Access Control and Intruder Detection.

Venezuela, Capital District, Caracas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

• Three+ years experience in C/C++ MCU programming, RTOS & firmware design, LabVIEW control & instrumentation design, & PCB design. • Three+ years experience in hardware circuit design including mixed signal board layout and signal integrity, switch-mode power supply design, & embedded system design. • Three+ years experience with lab equipment facilitating product design & testing; i.e. DMM, mixed signal oscilloscope, arbitrary waveform generator, network/spectrum analyzer, etc. • Experience with communication protocols: DNP3.0, MODBUS, CDMA/GPRS/EDGE/HSPA+ Cellular Networks, 802.11 Networks, 802.15.4 Networks, ONRAMP Wireless Networks, Landis+Gyr Radio Systems, I2C, & SPI. • Proficient with PSPICE, Altium Designer, Matlab, LaTex, Verilog, Microsoft Office, & Microsoft Project.

United States, CA, Sacramento | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

In my graduate studies, I specialized in algorithm designs and system developments for secure wireless communications, situation awareness based adaptive communications, signal detection and identification, positioning, and cognitive radio, as well as prototype developments for these advanced technologies. I have been involved in more than eight academic and industrial projects during the last six years. These diverse project experiences have provided me with a wealth of research experience and skills in signal processing, system designs, hardware and software developments, and giving me deep insight into various communications protocols such as WiFi, LTE, CDMA and DVB-T.

Canada, On, London | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Hardware, Software and Firmware Developers

A Fast, Focused and Flexible Client Driven Company! **For all your Hardware, Software, Firmware and Automation Needs ** We Deliver When and How It is needed! Cost Effectively!

Kenya, Nairobi, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical design, Telecom expert, Consultant

Electrical Engineering, MBA in Technology Management; and 10 years of managing telecommunication infrastructures of various Telco’s and private networks. Industry strategist; accomplished multimillion-dollar projects synchronizing business goals with technology solutions, leading to revenue; Expert in dark fiber deployment management, over 5 years of experience working with company management, helping to define business goals and implementing required applications to meet those goals. Networks Supported: Data Centers, SONET, DWDM, ATM, ISDN,MPLS, VOIP, WLL, CDMA / UMTS with RF deployment. Applications: CAD (Autocad, Eplan,Microstation), Telecom (Metasolv, GIS), Power & Lighting (Easypower, Visual), MS Project Languages: SNMP, TL1, Java, Unix, SQL+. Familiar with C++, Assembler and PHP.

United States, GA, Kennesaw | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

• Masters of Science in Electrical Engineering from The University of Texas at Arlington with focus on Embedded Micro-controller Systems. • Good expertise in hardware design and software programming of Microcontrollers X86, PIC24F family • Good understanding of Operating Systems internals, Computer architecture concepts and TCP/IP protocols • Basic knowledge of wireless technologies like CDMA, EVDO, WCDMA and MIMO Specialties: Microprocessor and Micro-controller programming and Hardware designing Micro-controller Family: PIC24F, PIC33F,TI MSP430, x86, 8051 Embedded Systems programming using MPLAB RTOS programming Operating Systems: UNIX, LINUX, Windows 98/XP/7 Networking protocols: TCP/IP,routers, ethernet switches Communication Bus Protocols: I2C, SPI, PCI, CAN, USB Software Tools: Code Composer Studio, MPLab, QNX Momentics, QXDM, Mentor Graphics, LTspice Hardware Tools: Power Analyzer, Spectrum Analyzer, JTAG, ICD, Agilent Callbox

United States, CA, Lake Forest | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Field Operation specialist

>Bachelor of Engineer in Electrical and Electronic engineering in Oct-2003 from Rajshahi University of Engineering & Technology(RUET) > 10+ years of experience in telecom network management, handling technical issues & service delivery. in multinational company (Huawei Technologies BD ltd) >Managed Network of Multivendor equipment (NSN, Ericsson, Huawei etc) Operations & maintenance, Support, NOC Management & CDMA (PBTL) Network in my career. >Achieved sound knowledge of Managed Services - Operations, Processes, and KPI/SLA Management & Improvement. >? Highly experienced to handle multi-tasking and able to meet the target under pressure and ability to deliver to tight deadlines

Bangladesh, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Consultant: RFIC, Analog, design, methodology

30 years of design and development of RF and analog IC's for communication systems (such as Cellular, WLAN, WiMAX and NFC). Processes used include CMOS, BiCMOS, and GaAs. Interested in opportunities such as reviewing product proposals, architecture, design, and layout reviews of systems and circuits, ESD, design methodology, design for test, design for quality, help in hiring and training design teams, selection of suitable process for your design, problem solving using 8D process, etc.

United States, CA, Cool | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering and project management professional

Over the last 30 + years, I have worked as a professional electrical engineer developing communications, computing, instrumentation, and avionics systems for corporations including Canadian Marconi, National Semi Conductor, Nortel, and Ericsson. I am an expert in project management and electrical engineering. I also have experience with web site development using HTML, dream weaver, photo shop, CSS and Flash. My core competencies include a sound business background, project management, a wide technical experience in software, computing, telecommunications, avionics, and internet based systems, excellent communication skills, highly developed organizational and leadership skills, and end to end development of new websites I am seeking opportunities in engineering consulting and design. With my broad experience, I can readily understand your requirements and engineer your requirements in a professional manner

Canada, quebec, beaconsfield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
China Manufacturing & Technology Consulting

GrayPoint provides China manfacturing outsourcing and engineering development teams to enterprises worldwide. Our management team is US based and in Qingdao China.

United States, WA, Ridgefield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
LabVIEW Architect (CLA), Microwave Engineer

I am expert in LabVIEW (have CLA). Also I am a Microwave Engineer and worked on FH-SS, CDMA, MIMO systems. This year I received CAPM from PMI and Network Engineer's statement from Washington University (WU).

Armenia, Yerevan, Yerevan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Electrical Engineer with focus on Radio Frequency Microwave and Antenna design. PROFESSIONAL & TECHNICAL SKILLS: • Experience with RF and antenna design. • Experience with radar systems. • Hands-on experience designing beam scanning antennas, phased array antennas and mechanically steered antennas.. • Comprehensive lab skills in measurements using millimeter antenna test-bed, high frequency probes, vector network analyzer, spectrum analyzer, oscilloscopes, and anechoic chamber. • Very good knowledge of Electromagnetic theory. • Good knowledge of Communication System (Satellite, Telemetry, etc...). • Knowledge of CDMA/GSM/3G/4G. • Hands-on experience with board-level design and simulation. • Great team worker in multicultural environment with good communication skills to co-operate others for achieving targeted goal. • Ability to work independently with excellent time management to push the design from start to end. •Bilingual (fluent in French and proficient i

Canada, Quebec, Montreal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

- Expert in designing, analyzing and optimizing Millimeter-wave antennas incorporating EBG, FSS, Metmaterials structures for Gain Enhancement, Electronic Beam Steering, Pattern Diversity, ESPAR, mutual coupling reduction in MIMO Systems. - In-depth understanding of RF network simulation and design as well as validation and analysis of data collected from the field in comparison to theoretical models. - Experience with industry standard design tools including Ansoft HFSS, CST Microwave Design Studio, ADS, MATLAB, Atoll, MapInfo, Windcatcher, MathCad, and the Microsoft Office Suite. - Demonstrated hands on expertise with RF lab equipment including network analyzers, spectrum analyzers, radio communication test sets and EMC measurements. - Experience with In house PCB Prototyping ( LPKF protolaser S , protomat C60 ). - Background in networking technology such as Routers, Switches and Protocols: 802.11, -GSM/GPRS/EDGE, UMTS, CDMA/EVDO, HSPA, GPS and Bluetooth. - Proficient in LAN/WAN Desig

Canada, Quebec, Montreal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Technical Professional

Master's Degree In Structural Engineering and Electrical Engineert; Structronic Engineer Proficient in the application of AutoCAD: Architecture & Civil 3D, REVIT: Architecture & Structure, and Inventor; Wolfram SystemModeler, Abacus, SAP2000, ETABS, and SAFE; Mechanical Desktop, MathCAD, Mathematica, and MATLab and Simulink, LabVIEW, Maple, and MapleSIM applied to Mechanical, Electrical, Mechatronic, and Structural Engineering Problems, for Design, proof of Concept, Modeling, etc. ? Structural Engineering: Performed MIL-Spec environmental, mechanical, structural vibration analysis and structural dynamic, et al testing and analysis for ruggedized electronic enclosures, systems, and structures for both shipboard and avionics applications per MIL-STD-108 E, MIL-STD-167-1, MIL-STD-167-1A, MIL-STD-461F, MIL-STD-704, MIL-STD-810G, MIL-S-901D, MIL-STD-1399, MIL-STD-2036A, MIL-STD-2088A, MIL-STD-8591, MIL-T-7743F. Project Engineering: Structural and Electrical Engineer

United States, WA, Seattle | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

• Certified (PMP, TOGAF Certified, ITIL Foundation, 4G, Networking) senior engineer with 9+ years of experience. • Wireless technologies Subject Mater Expert (SME). • Specialise in the provision of presale, technical support and training as well as solution developing and technology researching. • Quick to grasp new technologies and industry developments and recognises their potential to add value to customers and internal teams. • Possesses excellent interpersonal and communication skills used to great effect in developing positive relationships with customers and colleagues alike. • A strong and supportive team player and leader capable of training and developing individuals to enable them to fulfil their potential whilst ensuring that they make a positive contribution to the achievement of objectives. • Starting to learn Danish in IA Sporg. • Already have a working permit in Denmark. Areas of Expertise: <>Technical areas • Wireless technologies (Radio Access n

Saudi Arabia, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

10 years and 5 months of experience in Design, Development, Verification and Automation of Telecom/Networking products and Technologies like: L2/L3 Technologies like Ethernet, VLAN, VTP, STP, IGMP, and Routing Protocols. Optical (SONET/WDM) based Multi-service Switching/Transport Platforms. SIP/H.248/VOIP based Media Gateways. EMS/NMS (OAM&P) of IP DSLAMs and CDMA/EVDO based network elements. ATCA (Advanced Telecommunication computing Architecture - Linux based standard computing platform). Significant experience in Linux Administration tasks including configuration of monitoring tools like Nagios, UNIX networking configuration and management, server based automations (process management, user management, hardware resource management, log analysis etc). Significant experience in large telecom system bring up activities and telecom lab design. Proficient in developing complex test automation suites and frameworks using Perl, Tcl and PHP

India, kerala, Kochi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3D Modeling, Design & Drawings

3D Modeling, Photo-realistic rendering, 2D Drawings 3D CAD Designer with skills in AutoCAD 2D, SolidWorks 3D Solid & Surface Modeling, and COSMOSWorks analysis and simulation. Former semiconductor experience in IC Layout and verification of CMOS analog & mixed-signal integrated circuits. Knowledge of CNC (computer numerical control), basics of programming, and computer-aided manufacturing.

United States, PA, Lehigh Valley | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Signal Processing, Communications and Networking

Currently pursuing Ph.D. (Signal Processing, Communications and Networks) in Department of Electrical Engg., Indian Institute of Technology Kanpur. Technical Proficiencies: Wireless standards: 2G, 3G, LTE (physical layer aspects). Technologies: GSM, CDMA. Uplink and Downlink Techniques: OFDM, SC-FDMA, OFDMA, MIMO-OFDM, MC-CDMA. Experience: Working as a PROJECT RESEARCH FELLOW in JAYPEE INSTITUTE OF INFORMATION TECHNOLOGY NOIDA from 1st October 2011 to 1st August 2012. Project Title: “Development of algorithms for Narrow Band Interference reduction in IRNSS received signal” SAC Project code : OGP85 Sponsored by : Space Applications centre, Indian Space Research Organization (ISRO). Role : Researcher, Developer Status : Successfully completed and selected for publication in House journal of Space Application Centre For publications you can visit https://www.researchgate.net/profile/Neeraj_Varshney?ev=hdr_xprf

India, Uttar Pradesh, Kanpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
THINK.INTERACT.INNOVATE

7 Years Experience in PCB Design, High Speed/HDI,Ethernet/Gigabit, DC-DC/AC-DC/SMPS,Bluetooth/WIFI,CDMA/GSM, GPS Module,PCI standard compliant Video Card, Expertise of various EDA tools like Altium 14.3, ALLEGRO PCB Editor(Version 16.3,16.5,16.6), ALLEGRO Schematic HDL, ORCAD Capture CIS(10.3,16.3,16.6), ORCAD PCB Editor(16.3,16.6),ORCAD LAY OUT PLUS(10.3).

India, West Bengal, Kolkata | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reliable high technology B2B partner

Bitgear is a reliable high technology B2B partner in the innovation and product development. Our main areas are Embedded systems, Motion technology with MEMS, Digital Signal Processing and Internet-Of-Things applications. Bitgear is recognized by Deloitte as #2 fastest growing technology companies in South and Eastern Europe. Based on comprehensive set of in-house IP and excellent references in 100+ completed projects, Bitgear provides high quality, excellent value and fast time to market services and solutions. The company is process based and exports more than 90% of turnover to EU and US markets.

Serbia, Serbia, Zemun | Engineering & Manufacturing | Rating 0.0 (0 reviews)