PhD in Chemical Engineering Fourteen years experience as an Academic Researcher and as a Chemical Engineer for the private sector. Experience and expertise in chemistry, chemical engineering, detailed literature/ bibliography review, thermodynamics, polymers, scientific Research, product formulation, innovation support and scientific papers writing, chemical and physical processes. Post Doctoral researcher. Main expertise includes Research, FORTRAN, VBASIC, HYPERCHEM, MATLAB, SPARTAN, Chemical Engineering, Thermodynamics, Chemistry. Experience with Molecular Dynamics, GCMC, DFT, Ab Initio, Formulation. Participation and support of new ideas and projects from the beginning to visualization. Ten years' experience in quality systems [ISO9001, ISO14001, ISO22000, OHSAS18001], Occupational Health and Safety, Production Management, MSDS, Energy Efficiency for the building sector, Technical studies, Chemical studies.
PhD in Organic Chemistry. 8 years of experience in university labs. Over three years of experince in private institutions R&D (1 year in cosmetics and domestic chemistry, 2 years in organic and medicinal chemistry).
I am graduate in Chemistry ( M.Sc,M.Phil) Organic/Analytical having more than 16 years of strong practical and theoretical knowledge in the multidimensional relevant fields with the working in private sector i.e. Research and development, Synthesis,Fuel formulation,Cosmetics formulations, Lab Analysis, technical project and report writing and subject teaching expert
Professional Electrical Engineer and a Writer having multi-dimensional interests and expertise. As an engineer, Pro-efficient in Power systems solution design and studies using ETAP, electronic circuits + PCB design, Simulations and Programming on MATLAB, CAD Drafting, Project scheduling etc. As a writer, I am experienced in producing 100% PLAGIARISM FREE SEO Optimized Writings (Academic and Non-Academic), Technical Writings, Copy-typing, Proofreading, Paraphrasing, Business writings and presentations. My quality is drafting a document in simple and easy to understand language which is the core requirement of business and academic communication. I use pictorial representations, charts and graphs to portray facts and figures which enables reader to the grip the textual contents easily . Creative, client centric and focused. Rendering skills to the best matching client's needs with continuous support achieving highest level of satisfaction and extended working relationship
Chemist with Lab and starting Chemicals Ready for You! Hello, If you need a new product developed, or are looking to put new properties into an existing product please read further. I have experience in developing adhesives, coatings, UV curable coatings, lubricants, and other polymeric products with unique properties for specialty use. Could making your product super hydrophobic increase your sales? Could having your product operate at higher temperatures increase your bottom line? Could redeveloping your product with new materials save on raw material costs, make your manufacturing process leaner and save you money?
For the past fourteen years, I have worked in a wide spectrum of fields in chemical research and development. While my graduate school research was focused primarily in basic chemical research of polymers and nanomaterials, the majority of my industrial work experience has revolved around applied process development in areas such as polyurethanes, explosives, and pharmaceuticals. I now work in building products developing new products for customers and executing process improvements in our manufacturing operations. Specialties: Chemistry, Polymer Science, and Materials Science Engineering
Hi, my name is Dmitry, and I'm supposed to be a candidate for whatever you want connected with chemistry. I can give you any advise in Inorganic Chemistry/Physical Chemistry/Analytical Chemistry. As well, as it's required for PhD graduating, I have rich experience in research article writing. Also, since october 2014 I'm tutoring chemistry in my University, thus if you need any help learning chemistry, I'll gladly help you. For more data (job history, recomendations etc) visit my LinkedIn page here: ua.linkedin.com/pub/dmitry-novikov/88/618/1ab/ Thanks for time and attention!
Consulting services in Chemical-Mechanical Engineering, including Risks Analysis, Environmental Regulations, simulations with Hysys; Mexico Oil & Gas, and International Offshore-Onshore Upstream & Downstream aspects. Elaboration of general accounting, taxes, compliance with law, Internal and external audits. Elaboration of commercial contracts, Civil aspects as per Mexican Laws, Labor and Fiscal aspects in Mexico. Translations from English to Spanish and viceversa in Engineering, Accountability and Legal matters.
Scientist with PhD, Chemist. Expert in data mining, statistical analysis, Chemistry, Structure-activity/toxicity models developing, academic writing Consulting on chemical properties and biological activity, toxicity. Academic writing, Grant proposal writing, Translation service Web design, Visualization, Graphic Design, Photoshop CS6 Photography (landscape, macro, still life, city and architecture, travel, journalism)
Chemical Engineer experienced in process modelling, simulation and optimization, ready to help you with any engineering issue.
* PhD in Chemical Engineering from University of California - Berkeley * Engineering consultant with 7+ years experience in microfluidics and hands-on product development experience in the semiconductor and medical diagnostic sectors * Co-Founded Fluigence and won NASA contract to develop a microfluidic chip to probe for extraterrestrial life on the surface of Titan by conducting an enantiomeric chromatographic separation of chiral amino acids * 5+ years experience in integration of nanoporous materials into microfluidic chips for chromatographic and point-of-care diagnostic applications. * Expertise in chemical and physical characterization of polymer surface properties, analytical chemistry, surface chemical derivatization methods * 5+ years experience of process development in semiconductor manufacturing including, CVD, CMP, PVD, ECD, DRIE and thick, negative-tone lithography
Experienced Chemical Engineer and Naval Officer providing services for a variety of projects: > Engineering design and analysis > Data analysis and spreadsheet development > Strategic planning > Technical writing: procedures, analytical reports, etc. > Website development
I am a freelance technical consultant with a PhD in Chemistry and over 20 years experience in Chemical formulation, Adhesives, Coatings, Pharma and Medical Devices. I have led a number of research projects during this time where practical outcomes and cost control were critial and thus I am very result oriented. I have also worked on a number of reverse engineering projects in the polymer space. If you engage my services you can expect to work with a professional, with high quality technical expertise and excellent communication.
I am a professional Process Engineer with more than 7 years of experience in Process Engineering, Plants and Equipment design, Plant Operations excellence, Process Safety, Commissioning and Normal Start-ups of Ammonia/Urea based Fertilizer industry as well as in Oil & Gas sector. Worked as an Associate Professor in well known University of the country. Taught core Engineering subjects and assisted number of final projects,mini projects and in assignments of students related to any discipline included in Chemical or Petroleum & Gas Engineering.
Chemical Engineer skilled in polymers, material characterization techniques, spectroscopy, polymer processing, product development, oil & energy industry. Vast experience in technical writing and reviewing.
I am expert in all of the chemical engineering and related subjects. My portfolio includes simulations.
I'm a mid-career level organic chemist, currently doing consulting work. I've worked for private industry, for NASA, and I was part of the research faculty at Ga Techs School of Chemistry for 6 years. I have numerous papers published in peer-reviewed scientific journals, and have successfully secured grant funding in excess of $150,000 based on a single proposal that I have recently written. Other proposals are pending, as are over a dozen various patent applications. I love to teach chemistry, tutor children in science, work in the laboratory, write about science and chemistry - it's my life passion!
I'm a French engineer specialised in the plastic industry. I moved in Perth and am looking for new challenges and a job, I worked for 2 years for an automotive supplier (Faurecia) as a quality engineer in the injection & slush molding unit. My missions were to reduce process variability, the SPC way (teaching and leading the production team, leading an action plan and implementing correctives actions) and leading a troubleshooting group with QRQC way. After that, I worked for 6 years for a cable industry as a technical manager of a compounding unit with a lot of things to do.
IÂ´m a chemist, specialized in organic chemistry with 10 years of experience in environmental issues. IÂ´m a member of the Spanish National Chemical Association. My knowledge areas include: - Biodiesel from vegetable oil and algae oil - Cosmetics formulation - Coatings formulation - Fertilizer formulation - Detergents and industrial cleaners formulation - Environmental issues - Laboratory planning and design - Reach, CLP, GHS consulting
I have 15+ years in the semiconductor industry and am an expert in automation, statistics (6 Sigma Black Belt), scientific writing, technical analysis, and data mining. I am also a project management professional. I am also a very good tutor in all aspects of science at both the secondary and post-secondary (baccalaureate) levels, having taught freshman chemistry, freshman physics, heat transfer, fluids, and material science courses at the University of Colorado, my alma mater.
We, Bridgedots Techservices, are a Technology Research & Consultancy company based out of India. We expertise in Chemicals, Polymer, Membranes, Industrial Wastes and Advanced Materials. Our team is a mix of Chemical Engineers & Master of Sciences (MSc.) in Chemistry. Our core team members are Chemical & Materials Engineering from Indian Institute of Technology, one of the best institutes imparting technical education in the world. Our team has R&D experience of more than 20,000 hours while our advisers have total R&D experience of more than 0.2 million hours. Our team has successfully developed new products & process, and reverse engineered existing products for our clients in India, Europe and US. We have our own research laboratory setup for Product & Process Development, and have access to almost all testing facilities including DSC, TGA, XPS, FT-IR, XRD, XRF, Flexural Strength, Compressive strength, and many others.
I have over 19 years experience in synthetic organic chemistry including medicinal chemistry, material chemistry, self-assembly, catalysis, and process chemistry. Specific areas of expertise include synthesis of porphyrins, phthalocyanines, corroles, terpyridines, and their metal complexes. Industrial experience include multi-step synthesis of pharmaceutical intermediates, APIs, petrochemicals, agrochemicals, energetic materials and non-nutritive sweeteners. I have initiated and managed collaborative research in both academia and industries. I have coauthored 24 publications in scientific journals including one in Science and 2 review articles including one in Chemical Reviews and 1 book chapter for Elsevier. I was awarded with numerous patents for my contribution to medicinal chemistry. I specialize in organic synthesis, trained and skilled in technical writing and editing. Currently, I am working as a freelance writer, editor, tutor and adviser to clients in many companies.
I have extensive experience in the chemical/pharmaceutical/food/health care industries. I have been working more than eight years with manufacturing, maintenance, validation, quality control, and quality assurance in three different companies from Brazil, USA and Argentina. As a project manager, I know how important is to work on schedule and satisfy every clients' need. I guarantee dedication to your project to meet the deadlines and expectation agreed.
I am a chemist with well-established experience in product formulation and formulation development in the personal care and/or cosmetics and toiletries, household care, and industrial and institutional products manufacturing industries for over 7 years now. Working in these industries, I have handled formulation development and managed projects for clients from concept to market launch or from idea to full-scale manufacturing.
Phd Chemical Engineering-Cosmetology With 9 years experience on university labs 1 research stage in Cosmetic product manufacturing Are you looking for: 1) a Researcher (Cosmetics formulation-( obtaining and testing cosmetic products), marketing & legislation Consultant? 2) a SEO&Social Media Analyst? 3) a Team Leader for your project/company? 4) an Editor, Article Writer, Web Content Writer? I have done my research stage on cosmetology at Milano and also I have participate at many Conferences in this domain. The most interesting was ?In Cosmetics Milano? I have published some academic article in some of the important scientific journals ?Industrial & Engineering Chemistry Research? Let's see how we, together can make your business and projects grow and generate awesome results. I am full-time freelancer. This means I will focus 100% on your project only. So contact me. :)
I chemical engineer i have many skills in chemical engineering i capable design us programe simulation example HYSYS, CHEMECAD, us program mathematic chemical process project manangement ,i am working now in market and advertist in the internet and sereach of job in my deperment
Having BSc. In Chemical Engineer and Specialized Master Degree in Process Simulation Using Aspen Packages to perform full and detailed engineering design to all types of chemical plants ex. OGS , petrochemicals , fertilizers, and cement plants including the following aspects 1- Generating Full Process Flowsheet. 2- Generating P&ID. 3- Details Vessel design ex. Vertical and horizontal Tanks , decanters, flash chambers. 4- Detailed design and rating for all types of heat exchangers using HTRI packages. 5-Generating plant layouts. 6- Designing all types of Reactors like plug and batch reactors 7 - Providing consultations for any type of chemical plants and providing problem solving and process optimization. 8- Performing Startups and dynamic state modeling. 9- follow up operation till steady state aquired 10-Mechanical Design for Chemical Equipment(condensers, exchangers, distillation columns...) 11-CFD analysis for recators P. S :I own 7 years experience in the field
T-Lab is a company in which a group of talented Chemical Engineers work side by side with Software Developers to delivers services that help the process industry in areas of modeling and simulation.
I always believe that a journey to a thousand miles, starts with a single step. More than 4 years experience and hand to hand knowledge and experience in Pharmaceutical Research. I provide a key service in pharmaceuticals, cosmetic and nutraceuticals formulation with its documentation approved in various regulatory markets such as USFDA, MHRH, TGA, FDA and other regulatory body with its DCGI, clinical trials and import and export registration of a product. An addition service of product registration in various countries with WHO GMP certification I also provide the professional level content writing and article writing that covered with the SEO targeted keywords and meta tags and description that make Google and other search engine to crawl it easily and site shows effect in very short time.
Â I am a chemical engineering professional with a focus and passion for biotechnology and a combined 4+ years of research , process engineering, & validation experience. Â Expertise with: Process Optimization, Product Development, Technology Transfer, Powder Blending Optimization, Formulation, Tabletting, FDA/cGMP regulatory documentation (QRAES, URS, FS, IO&PQs, Test Mapping, & VMPs); TFF/ UF DF/ Harvest/ Viral Filtration systems; Pasteurization; Aseptic Filling & Capping; Sol-Gel Thin Film technology; Dye Sensitized Solar Cells; Bio-ethanol Conversion; & Liquid Crystal phase change behavior.
I have over 10 years of experience as a chemist in the beauty industry. I have worked for major beauty lines developing hair care, skin care, and body care products. I am adept at reverse-engineering and replicating aesthetics of products that are currently on the market. Additionally, I have extensive experience curating, creating and editing feature content in various categories that include beauty, food, wine, philanthropy and Q&A with key influencers.
We are early stage engineering research company and do mechanical, chemical engineering and chemistry analysis for process improvement, product development and pre-prototyping design. We also can help with equipment sourcing. We do industrial projects or student projects that are directed towards a business or social model. Please note: *We do not do student homeworks/projects/exams*. A small team of professionals belonging to various engineering fields mainly Mechanical, Chemical, Electrical Engineering. We can do jobs of the following nature: 1. Instrumentation and Piping Layouts 2. CAD/CAM 3. Structural Design 4. Thermodynamics, Combustion, Heat transfer analysis. 5. Renewable/Sustainable Energy related consulting. Water-Energy Use sustainability. 6. Water treatment for industrial processes. We have also several close industrial ties in Southern India, Western Africa and NE United States
Senior level scientist possessing expertise in the fields of polymer chemistry, and material science. Skilled in exploring new scientific ideas / concepts and utilizing advanced technologies to manufacturing process. Proven researcher with leadership abilities who is focused on success and inspired to achieve. Has a positive attitude, enthusiastic, and self-motivated.
Formulator, green chemistry solutions for industry and households
I am a 3D modeling/drafting expert, using Autodesk Inventor, CATIA, SolidWorks, AutoCAD...for my work. I have a lot of experience in manufacturing design. I have worked on variety of different tools, consumer products and machines design. I am very creative and innovative engineer. I am perfectionist and I pay much attention to details, that is very important to me. I always give my 100% in order to do the job perfectly and satisfy my employer. I'm very communicative, and easy to talk to.
Process/Project/Commissioning engineer with a multicultural background. Proficient in Spanish, English, French and German language. Expert in Syngas generation and Upstream Oil&Gas business. Technical translation.
My professional career has mainly been in the field of Chemistry. Currently I am serving as a lecturer at army public school and college. I have been editing and writing documents and articles for several years. These experiences have equipped me to become a professional and qualified writer. I continually strive for perfection in my subject. I can work alone without supervision and or intervention. I believe my life lessons, skills and level of professionalism reflects in any project. I have been and will always be on time and strive to come in with 100% accuracy. I have an eye for detail and accuracy, as it just comes naturally for me. My work is always double and triple checked to provide such accuracy. I strongly believe in error free work.
I completed my graduation in Chemical Engineering from University of Engineering And Technology Lahore, Pakistan with Excellent record.
- Process and equipment designing. - Thermodynamic analysis of rajby industries washing plant. - A house build-in chemical lab for research purposes. - Designed and erected the waste treatment plant for reuse of water in denim washing industry. -Conducted feasibility for the reduction of fuel for power and boiling system. - Conducted research on the analysis of sand on the various beaches of karachi.
I AM A CHEMISTRY TEACHER AND WILL BE GLAD TO PUT MY RESOURCES INTO PRACTICE FOR THE BENEFIT OF THE STUDENTS FROM GRADE9-12. THIS IS WHAT I HAVE BEEN DOING ALL MY LIFE AS A TEACHER.
Self motivated Chemist and Biologist with vast experience in GMP Quality Control laboratories, Product and Process Development, and R&D. Knowledgeable in the management and technical aspects of R&D and Quality Control areas as well as regulations and guidelines enforce by regulatory agencies. Particularly skilled in Consent Decree remediation agreements, Corrective Action / Preventive Action (CAPA) program management, scientific analysis, project management, analytical method development and validation, as well as Standard Operating Procedures development and implementation. Accountable and trusted individual with proven leadership and analytical skills. Strong interpersonal communication skills allow the development of rapport with individuals at all level. Computer literate. Fully bilingual, Spanish and English languages.Worked in pharmaceutical companies such as Pfizer, Amgen, GlaxoSmithKline (GSK), J&J, and United Therapeutics
Final student in Indian Institute of Technology Kanpur, one of the best institutes in India. Also, an active scholar with strong foundations of Chemical Engineering and believe in out of the box thinking to nd efficient solutions to problems.
Masters of Science and engineering: (MATERIAL ENGINEERING AND PROCESSING):SWEDEN Bachelor of Science and engineering: (CHEMICAL ENGINEERING): Bachelor of Science: (CHEMISTRY): 3 years + experience in process industry 40+ management and technical courses
Previously worked at NASA's Kennedy Space Center in the Materials Science Division as a Chemical Engineer II for Polymer/Emulsion Coatings. Experience in Organic Synthesis, product development, and Economic/Profitability Analysis of a new start-up company. I also worked with Honda on development of automobile coatings for weather resistance and durability.I attended the University of South Florida for my BS/MS in Chemical Engineering. I worked at the Clean Energy Research Center for my Masters thesis of utilizing graphene for a viable Hydrogen storage material. I am now about to start my PhD in Chemical Engineering at Tufts University in Boston, MA in the fall of 2013. I have hopeful aspirations of entrepreneurship and forming my own startup company based around sustainability, clean energy, and water purification. .
I am a Graduate Chemical Engineer having experience of working on Crude distillaiton, Vac. distillation, propane deasphalting, Furfural extraction, MEK dewaxing, Propane recovery and hydrogen generation.
I am a PHD Chemist with many years of experience with IBM and Micron Technology in their Analytical Chemistry/Materials Characterization Laboratories. I have extensive expertise in Quality Control of chemicals & Manufacturing Processes. I am well versed in Excel and its application in Statistical Methods for Process Control Charts.
Berg Scientific, LLC offers expert consulting for chemical R&D and regulatory compliance. Specializing in surfactants, polymers, preservatives and other chemicals for personal care, HI&I, and industrial products.
With a bachelor's and postgraduate degree in Chemical Engineering and 17 years of work experience, I am a versatile and well-rounded professional. I have held various professional full-time roles both in private companies and government organizations in manufacturing, research and development (R&D), science, utilities, consulting, and academic sectors. I can offer administrative services, editing, writing of report, thesis proposals, feasibility studies, business proposals, business plans, thesis, etc.
I have completed my PhD in chemical engineering from one of the premier institutes in the world, Institute of Chemical Technology (formerly UDCT), India. My field of research is computational and experimental fluid dynamics. I have worked on systems involving single phase flows, multiphase flows, heat transfer and jet mixing. I expertise in commercial CFD codes such as FLUENT as well as in open source CFD codes like OpenFOAM-1.5/1.6/2.0.1
My name is Sanusi Ibrahim, a graduate in Chemical Engineering with vast knowledge of chemical engineering process design skills with about 4 years of technical experience and expertise via feasible process design of chemical plant from the most readily available,non edible, biodegradable and green natural resources as raw material. And through conversion of non-biodegradable waste to wealth. Therefore I can carryout a process or plant design project and come up with the most feasible and cost effective business plan using environmental friendly raw material and taking full control of factory hazard via manual safety procedures and plant automation by instrumentation. My final year design project won FIRST PRIZE AWARD in Nigeria. Therefore I'm competent.
I have a Bachelor of Science degree in Chemistry / Physics and six years experience in Quality and Environment field. I am fast learner and dependable with a variety of skills and common sense.
As a Masters graduate, I am seeking a challenging and productive opportunity in Chemical Engineering where the knowledge and abilities that I have acquired from previous experience and education will be developed and used for the benefit of my company, as well as to improve all my capabilities and skills. I have experience of process simulation, development, and optimization through my MS thesis. I have one year training experience at Lotte Paksitan PTA Ltd. Specialties: Process Simulation using Aspen Plus and Aspen Hysys, Process Optimization, Heat Exchanger Design and Rating, Pipe Network Hydraulic analysis using Aspen Hydraulics.
graduate chemical engineer with experience as a professor of chemistry / 4 years / and chief laboratrorije in the paper industry / 20 years old /. I have a lot of knowledge in the field of analytical and organic chemistry. also in chemistry sugar, medicines. I dealt with the faculty research. use of statistical methods for data processing / control charts, histograms, process control, process capability studies, analysis of the causes and consequences of the processes in the chemical industry / experience as a moderator in one social network in Serbia / moderation pictures, blogs, video clips, etc. / a period of 18 months.
Daniel Beneroso is a Chemical Engineer with 4 years of experience in energy and environmental engineering and R&D, which he has built upon an early career in a prestigious coal research institution (INCAR-CSIC). My interests are focused on new technological processes within industry including biorefinery processes.
I am a Chemical Engineer with vast experience in engineering designs
I am a chemistry graduate with 7 years experience in scientific research, which includes 5 years working in a biofuels processing plant. From this experience and other skills I earned from trainings and courses, I am here to offer you the best Chemistry/Chemical engineering consultancy services your need into your work. Furthermore, as I studied my BSc in both of French and English which are both official languages in my country, you are at the right place for your English-French (vice-versa) scientific translation. Thank you, Ananie N.
Do you need an advice, full technical information about some chemical technology or idea how to perform industrial and laboratory tasks? My skills and 15 year experience in the field of polymer, colloid and inorganic chemistry and chemical engineering will be useful for this. I can help You to formulate chemical products, to find a suitable technology and related information. Or, maybe, You require to identify an unknown chemical composition? I have an experience of polymer and water dispersion coatings formulation, hydrophobic agents, waxes and auto-care compounds formulation, inks and superhydrophobic surfaces development and many other applications. Also, I have research experience, this, and instrumental skills helps me to solve really hard tasks, as, for example, composition components identification. My clients is my greatest value. Only they can give me a new direction of research and so, of adventure.
I graduated Biochemistry and Biology (postuniversitary studies). I have a master degree in Biotechnology. I was a biology teacher for six years. I have a five years experience in Quality Assurance, HACCP, GMP and hygiene in baker's yeast production. I have two years of experience as an ISO 9001 auditor. I have experience in test planing and evaluation of results, data analysis and reports, chemical and microbiological methods preparing, checking and improvement. I was a food safety, food factory hygiene trainer, contamination and pest control trainer, hygienic design of food industry equipments trainer. I use and design databases. I have very good Excel Skills, because I was extracting from very large databases all the information I need to prevent contamination problems. I was trained for three weeks by a SES-Expert (Senior Experten Service) on food safety, HACCP, pest control, contamination, food safety legislation.
Dr Amir Moezzi is the founder/director and chemical/process engineer at Avocado Engineering Pty Ltd. He holds a PhD in chemistry/nanotechnology from University of Technology Sydney (UTS) and a BSc. (Hons) in chemical/process engineering (oil/gas). Currently, he is working on industrial waste processing & resource recovery projects & procurement of materials & process equipment. Dr Moezzi is expert in chemical/process design engineering including waste processing & technologies, flow assurance/hydraulic engineering & chemistry/nanotechnology (zinc chemicals expert). He designs novel processes for energy & waste management & processing.
I have been designing Gas Processing Plant & Crude Oil Refinery for last couple of years. My client includes both public &private oil & Gas company from Indonesia & Bangladesh. Design Skills: Process Simulation Software: Aspen HYSYS, PROMAX, PRO II Heat Exchanger Design: Aspen EDR, HTRI. Flare System: Aspen Flarenet Analyzer Engineering Design & Standard: GPSA, HTFS Research Network, API, Shell DEP
My name is Jaroslaw Niziol. I work in a Chemical Engineering field. My specialisation is chemial reactors, distillation, rectification projects for industry application. I am using the basis knowledge of: chemistry, chemistry physics: kinetics, conductometry, enthalpy, entropy, thermodynamic rules, energy and mass balance. I can also work in engineering field making feasibility studies or helping with technical problems. I am using the Excel, Matlab and Matchcad for calculation. I can also work on Chemcad and Autocad.
I'm a Mechanical Engineer and a professional 3D designer who can design complex shapes and large projects, I have 4 years experience with Solidworks design, simulation and CFD analysis, 3 years of experience in product design. I have great communication skill, excellent English language. My work is of high quality, and is done in time. client satisfaction is my first priority.
A technically competent individual with Master of Technology in Chemical Engineering. A systematic, organized and hardworking individual with an analytical bent of mind determined to be a part of a growth oriented organization Working Experience as Process Engineer with M/s. Lupin Ltd., M/s.UNIVERSAL FORCES INDUSTRIES and having exposure to Â To design PFD, P&I Diagram for distillery plant. Â To Establish Detail Engineering for Fuel ethanol projects. Â To Calculate Material & Energy Balance. Â To prepare a basic Control philosophy for Distillation & Adsorption Operations. Published a International paper on ÂSynthesis of colloidal Ruthenium nano catalysts by chemical reduction methodÂ, in Journal of ÂE-Journal of ChemistryÂ in 2012. ÂCompleted Certification Course in ÂPIPING ENGINEERINGÂ from IIT BOMBAY.
Experience in cross-disciplinary areas of environmental, analytical chemistry, organic chemistry, biochemistry, OH & S and sustainability. Excellent and proven research skills in collecting a range of scientific information, data and problem solving. Demonstrated ability in extracting complex information from environmental, health, toxicity data bases and research papers. Experience in soil, water,ambient and indoor Environmental chemicals data validation for audits/ assessment projects. Experienced in characterisation of chemicals for environmental regulatories. Excellent abilities in data analysis/ interpretations for a range of analytical chemisty methods and instrumental analysis. Demonstrated abilities in technical writing: scientific papers/ technical reports, publications. Lakshmi attained a high level of credibility among peers by conducting in a highly professional manner, giving advice and assistance & established good relationships with clients.
Chemical engineer and MBA with strong financial and market research background, experienced in the o&g industry as process engineer developing process simulations and equipment design.
Research and development is my life. I love diving deep into a project and seeing it to completion. My main areas of expertise include biomedical engineering, material development and electronics. I have both created and programmed many hardware components and would love to bring my bio background in to future projects.
studying chemical engineering (2012-present), intermediate in per-engineering, completed an internship at General Tyre & Rubber Company Pakistan (compounding department).
Formulation, R&D, prototyping, quality evaluation and stability testing.
13+ Years design experience in commercial and manufacturing applications. Experience with chemical and mechanical engineering principles and applications of laws of physics and chemistry. Strong CAD background, Solidworks, AutoCAD, some Pro-Engineer. Strong background in Computational Fluid Dynamics (CFD), using FloWorks primarily. Experienced setting up complex and automated spreadsheet applications for engineering purposes. Background with refrigerant gases and sulfur-hexafluoride insulator gas (electric utility purposes). Distillation experience separating mixed refrigerants. Experience formulating and manufacturing batch quantities of bio-diesel.
Chemical Engineer. Studying a Mechanical Engineering Masters Degree. With special interest in Energy Conversion and Transport. Industry projects related to the development of renewable energies.
Through my work as a Product Development Scientist, I brought over 20 products to market through concept development, formulation, stability, package design, scale-up and regulatory overview.
I am a Chemical Engineer and a university lecturer. I am interested in designing of process plant, doing material and energy balance, drawing engineering diagrams and doing research in any field related to chemical engineering. My scope of expertise: - Microsoft visio - MATLAB - LATEX - Microsoft word - Microsoft excel - Microsoft power point - Technical report writing
I have done Master degree in organic chemistry (QAU Islamabad), Mphil degree in Organic chemistry (HEJ Karachi) and PhD in chemistry (BUCT China) from most reputable institutes of chemistry education and research. I am excellent at research and management. I can work independently and also as a part of team under any circumstances. I can work all over the world.
I have a Ph.D. in Synthetic Organic/Medicinal chemistry with 11 years experience in both, five years of chemistry teaching experience, two years employment in Big Pharma, seven years academic-chemistry-science management, four years methodology creation and implementation and a track record of safety, GMP, GLP and QA/QC. Outside of science I have a broad range of skills: business management, economics, advertising, non-technical writing, product design and development, personnel management and mechanical design, repair and maintenance. I'm also a winemaker. My passion is solving difficult problems...
I am an enthusiastic and ambitious person who can take creative yet responsible approach for any task that I am presented with. Through my work experiences in journalism and translation jobs, I was able to acquire skills such as working in teams, problem solving and communication. As for my chemical engineering course, it provided me skills to spot minute details and analyzing any situation with great care.
I am a highly qualified and experienced chemist, specialising in catalysis and pharmaceutical science. I am available for consultancy, research projects, literature searching, report writing and other scientific ventures. I would be happy to give my professional opinion on any chemistry related questions you may have as a small business or an individual. I am enthusiastic, hard-working and have many useful contacts in a variety of scientific disciplines. If I can't help, I probably know someone who can...
I have a Ph.D. in synthetic chemistry and post-doctoral experience in analytical chemistry. I can provide scientific research, writing, and editing.
Chemical Engineering and Software Services
If you need to develop a new product, improve or upgrade existing product, test or analyze chemical materials I am able to help. The knowledge in chemical engineering that I have accumulated throughout 7 years working in field of composite materials is useful for such problems solving. During my education I work in the surface coatings field, especially paints, functional coatings, detergents and superhydrophobic surfaces. And it is still going. Now i'm doing my PhD. I have hands-on experience in research of polymer materials and formulation of the chemical composition, skills in analytical techniques and direct access to laboratory. I will be happy to help you obtain your goals.
IÂ´m a Chemical Engineer, specialized in Water Treatment and Process Optimization with many projects of experience in environmental issues. The solution it's my goal. My knowledge areas include: - Biodiesel from vegetable oil and algae oil - Water Treatment process. - Reactor Design. - Process Optimization. - Petrochemical Emergency Response. - Environmental issues
PhD chemist with a very wide knowledge of chemistry that touches on nearly all sub-fields of the subject. As a teaching-only assistant professor, I have ample time to work on side jobs, especially in the summer. Over the last 10 years, I have authored or co-authored articles for publication to journals such as Science of the Total Environment, Inorganic Chemistry and Angewandte Chemie, including scientific graphics and digital artwork.
I graduated from West Virginia University with a B.S. in Chemical Engineering, and am currently pursuing a M.S. in Mechanical Engineering. I have worked in a materials lab for 5 years developing solid state battery technologies and scaling up a catalyst synthesis process. I have experience researching and developing procedures chemical synthesis processes. I have interned at NASA's Marshall Space Flight Center, as a part of the NASA Academy program, where I worked in the environmental control and life support systems group on evaluating and troubleshooting a test stand for CO2 adsorption testing. Final reports on projects from both my required coursework as well as my internships are available in my portfolio. In addition to my formal education and work experience, I also have developed skills working on personal projects including building and calibrating 3D printers, blacksmithing, and building a liquid fueled rocket engine.
If you are looking for professional support in your projects and in the same time you are concerned about the costs please do not hesitate to contact me. I could help you in the following areas: - Prepare PFDs and P&IDs; - Prepare mass and energy balance of the process; - Perform hydraulic and heat calculations; - Prepare data sheet for pumps, heat exchangers, tanks, special items; - Prepare tender specifications; - Prepare process descriptions, functional descriptions, operating manuals; - Calculate and specify Pressure Safety Valves and Disk Ruptures; - Prepare hazardous areas calcifications acc. to API 505 or IEC 60079-10 - Prepare and update the drawings; -Prepare process safety analysis (FMEA, Event tree analysis, ) - And many others.
18 years of working experience as process engineer for process conception, design & development and detailed engineering works. Carrying out equipment sizing and hydraulic calculations for all process units like pump, control valve, vessel, PSV, line sizing and other process calculations involved in the process design. PFD and P&IDs, Heat and material balance, line schedule, utility summary, effluent summary etc. Fields Of Experience Â Oil and Gas processing, Refineries, Pipelines, Pipeline Terminals, Â Petrochemicals, Utilities, Ports and Terminals, Â Ammonia, Urea plants Various phases of projects 1.Conceptual & Feasibility Studies 2.Front End Engineering Design (FEED) 3.Pre Bid Engineering 4.Basic Design 5.Detail Engineering Software Knowledge - Process Simulation Â HYSYS Â PIPELINE STUDIO (TL and TG NET MODEL) Â Shell FRED Â FLARE NET Â PIPE NET Â PIPESIM Â PIMS Â PRO II Â InstruCal
Currently, I'm an international doctoral student in Japan. My main focus of research and activity is modelling and simulation of chemical engineer processes such as: chemical reactors, membrane reactors, separation processes, control and simulation of chemical processes and more.
A chartered chemical engineer (MEng, PhD, CEng, MIChemE) with over 10 years of experience in chemical product design and chemical process development gained within R&D leadership roles in industry/academia. Extensive experience as an independent consultant providing value-added expertise and technology transfer to multinational companies and SMEs in the pharmaceuticals and materials sectors. Over 7 years' experience lecturing at university level in chemical engineering courses, including: mass transfer, separation process, chemical process design, chemical product design, reaction engineering, chemical process safety, waste minimization, ISO 9001 quality management, ISO 14001 environmental management.
A professional engineer with expertise in Oracle Database administration,scientific research,food technology and general computer skills.
I'm a chemical enginner and I have experience in modeling of industrial processes in matlab. Also, I can do translations from Spanish to English
I'm am a fresh graduate and me with my two more friends,one a software engineer and other bachelors in English have joined hands together to produce something phenomenal.. We can and will deliver great results with a process that?s timely, collaborative and at a great value for our clients..
I have completed 3 out of 4 years of my master's chemical engineering degree at a top russell group university in the UK. I'm very smart and work very fast, possessing multiple skills.
12 years post-PhD. PhD in analytical chemistry with biology/biotechnology and environmental chemistry experience and knowledge. Experienced grant writer (over $1.8 M secured in the last 8 years). Great math skills. Also available to work on projects involving research into scientific truth/content verification. Can evaluate scientific claims in proposals or business plans. Great knowledge of scientific vernacular and able to translate scientific concepts into layman's terms. Experienced educator who can assist with writing educational grants, texts or exam/quiz questions. Great proof reading skills for scientific manuscripts.
Chemical engineer specialised in systems optimization and operations management. I have more than 4 years of experience in process planning and control. I?m efficient at data managing and use of Microsoft office, Excel when manipulating data and PowerPoint for executive projects and presentations.
I am a B.Tech Chemical Engineer and currently working as a process engineer. I have expertise in material and energy balance and other equipment sizing calculations for heat exchangers and condensers, tray hydraulics in distillation columns etc. Delivering quality output within the stipulated time at reasonable working rate is assured. Your work would be given priority and the amount of time quoted / decided will be followed with utmost discipline.
I have 37 years experience doing process and project engineer for various engineer firms and production industrial groups in Mexico, like Foster Wheeler, ICA, SENER, CH2MHILL, Grupo GIRSA. I can make process analysis, process preliminar calculations, review designs, write process descriptions for biddings, etc.
Hi, I am a chemist offering product formulation services for herbal supplements, cosmetics, polymers, home and car care products or any other product formulations your business may' need.
We have experienced post graduate experts ( engineers, scientists, researchers, scholars, chemist, etc.) in the fields of Chemistry, Human Science (Psychology), Environmental Sciences, and other natural sciences. We always welcome to a challenging environment. We can explore innovation, creativity and outstanding performance for those who are interested to get our services.
Ph.D. in Biochemistry/Biophysics; publication record includes nearly 50 articles in scientific journals, books, & encyclopedias of science, as well as writing/editing Biochemistry section of science dictionary. Professor at Ivy-League college, mid-western univ., & community college: classroom & lab instruction of undergrad & grad students; writing & grading exams & research papers; design/writing of WORKABLE lab experiments, protocols, & manuals for lab classes & my own research program. Funded by American Chemical Society, Diabetes Association, Heart Association, & National Institutes of Health. Looking for editorial work/content writing in fields where background is useful. Topics of interest include, but are not limited to, biochem, biophys, chem, proteins & enzymes & relevant active-site models, metals in biology, nutrition, pharmacology, porphyrins & chlorins, spectroscopy, vitamins, & oxygen-utilization by living species. *Avocations include gardening & knit design.*
Our goal is production, and we'll get you there fast and in the most efficient manner possible. We can design any product and have a very deep network of manufacturing partners as well as multiple offices; we are easy to reach and easy to communicate with and we've got more than a decade of relevant experience freelancing. If we start it, we'll finish it! I've got a Manufacturing Engineering Degree, Business Degree (both from BYU), can speak several languages and have a lot of experience in global procurement and engineering. There is a sad truth in product development, the sad part is that the percentage of completed projects is very low, between 3% and 5%, what's further interesting is that those who do succeed seem to succeed over and over again, for example my firms success rate last year (counting project launches) was 82%, and if you excuse the project that ran out of funding it was 100%. There is no substitute for experience, and we've got the experience and the skill!
BEng, PhD chemical engineering from Loughborough university December 2011. CAD Modeling simulation of engineering, biomechanical and biopharmaceutical processes. This includes transport studies in skin and structural analysis of solids 3D and 2D design and animation using CAD and FEA Process flow diagrams and piping and instrumentation diagrams Formulations for topical and transdermal applications. Technical writing: scientific contents, training/ tutorials and proposal writing. Software: autocad, autofem, comsol multiphysics, skin-cad, Microsoft excel vba, matlab...
My work experience ranges from design and start-up to trouble shooting and rework. I have worked as part of team to design hundred million dollar chemical plants that are currently operating. I have worked individually to evaluate small start-ups. In several days, I reviewed and came to the conclusion that an idea was not economically viable as a start-up. The project was continued by a team that was never able to bring economical prototype on-line. In New England (USA), I perform hands-on work, trouble shooting and other non-design services. I have been called on when multiple firms could not resolve an issue causing multiple batches to be lost over nearly a year. I resolved the problem in a day. I have found fire and explosion hazards being ignored and bypassed by a vendor for nearly a decade. When I was a junior contractor, I provided custom controls software that had a fraction of start-up issues the regular senior engineers had previously provided.