Freelancers by Skills

301-400 of 1485 Professionals
The mission is to exceed customers expectation.

The mission of Peninsula Design Engineering is to meet or exceed our customer's expectations to improve their designs, lead times, complete technical drawings, drafting tasks, build prototypes and perform analysis.

United States, CA, Pacifica | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I know I can

I am a degree-qualified Chemical Engineer with a postgraduate qualification in Science, specialising in physics and safety. I possess approximately 7 years experience in the nuclear industry, including work in project management, general maintenance management and general engineering support. My experience includes vibration analysis and thermography techniques to improve equipment reliability (predictive maintenance).

United Kingdom, Avon, Clevedon | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reservoir Petroleum Oil & Gas Engineer

Eighteen years of reservoir engineering experience with a consulting firm and two international company. Areas of technical expertise include reservoir surveillance, production optimization, field development planning, field operations, reserves management, economic evaluations, reservoir simulation modeling, probabilistic modeling, rate and pressure transient analysis, well testing, production logging, and database management. Experienced in technical evaluations to support projects such as general property appraisals, detailed in-depth full field economic analysis (including reserves depletion forecast, infill vertical or horizontal development drilling, identification of workover & behind pipe opportunities), exploration studies, annual SEC and Canadian NI-51-101 filings, initial public offering (IPO) filings, court testimonies, project feasibility studies, property acquisitions and divestments, financial lending qualifications and bank reports, gas deliverability modeling, patter

United States, Texas, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Efficient and Insightful process engineer

I am a chemical/process engineer with a strong experience in process development and working with projects from initial process design through construction and start up. Keeping the project focused on the key process decisions and deliverable helps me deliver superior engineering work with an efficient use of hours.

United States, CA, Berkeley | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Your ideas, my creation!!!

I am a Mechanical Engineer by profession and a CAD (Computer Aided Design) Engineer. I have been offering my services in the field of CAD modelling and design for the past 3 years employing softwares such as Solidworks, Keyshot and Autocad to achieve my goals.My services range from designing for 3D Printing, Sheet Metal, Injection Molding and Manufacturing processes to providing Photo-Realistic Rendered Images. I happen to find the utmost satisfaction in bringing ideas to life allowing me to demonstrate my creativity, designing and imaginative skills. My passion for this field allows me to truly relish challenging projects that come my way. I believe my experience coupled with your vision would allow me to provide you with fresh ideas and solutions that are not only practical but aesthetic too. My clients feedback is a testament to the quality of my work i'm willing to provide along with clear and concise communication to breathe life into your ideas.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 5.0 (11 reviews)
Quality and Effective Delivery

A professional specialist experienced in variety fields. Possess very good knowledge of administration, fashion and food stuffs, chemical engineering, quality management, project management, ISO and supply chain and procurement as well as audit skill, analyzing skill, creative solutions, managing, consulting, training, recruitment and customer care, data processing and web search....

Vietnam, Ho Chi Minh City, Ho Chi Minh City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Highly experienced researcher

Hello, I am a very experienced independent researcher/consultant. I enjoyed doing web research to find the best solution for my client. My education background is hard science (physics, chemistry) and I obtained my doctorate degree in that field from a leading US university. I gained extensive research experience through both academic and industrial research organizations. I can offer you excellent research to solve your problems, I can offer you best quality for your tutoring need in hard science (Math, Physics and Chemistry), I can help you do any translation work between English and Chinese for both technical articles and regular articles, and most importantly I will cooperate with you to help you address any questions you may have from start to end.

United States, CA, Sunnyvale | Engineering & Manufacturing | Rating 5.0 (2 reviews)
Electronics Packaging & Production Engineer

I'm a degreed design engineer specialised in electronic packaging & production. Don't be confused with the term "packaging": it refers to enclosures and protective features built into the product itself, and not to shipping containers. My skill is very close to mechanical design engineer. But an electronic packaging (of a missile flight control system as an example) is a challenging task. In addition to skills in mechanics, it requires some knowledge in many fields, from chemistry to circuit design and programming, as well as a good command in various CAD/CAM systems.

Russia, null, Kursk | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Expert Designer for Mechanical Engineering

Expert Designer with more than 32 years of experience in designing and manufacturing of process plants, process equipment and special purpose machines. Specialization in multiple industries including Food Processing, Dairy, Herbal Extraction and others. Design services scale from individual equipment design to a complete plant. Specializing in medium scale plants. Expertise in tools include - Solid Edge, Unigraphics, AutoCAD and others End to End Design services from Concept to Manufacturing drawings and 3D Models.

United States, CA, FOlsom | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Scientific Programming and Biotechnology

US Citizen living in Germany. --- $75,010/$41,930 Lifetime/12-month Earnings - 4.9 star running average - Elance verified - BSci - MCSE- HPUXCA - VDE - SIAM - Python - Linux - Windows - OSX --- Work guaranteed in writing --- I'm a US native living in Germany and a 20 year veteran with engineering, project management, technical and scientific writing, and scripting. I'm currently specializing in scientific coding including modeling and data analysis. The advantage I can bring to you is quality - Guaranteed - in WRITING. If you're not satisfied - I'll fix it. I look forward to the chance to work with you! Mike Rightmire

Germany, Baden, Karlsruhe | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am an Assistant Professor in Analytical Chemistry, I have 15 years experience of teaching and research in chemistry. I have supervised 14 master students and published several scientific papers follow by three patents.

Malaysia, Wilayah Persekutuan , Kuala Lumpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Agrochemical project`s consultant

Chemical Engineer with proved experience at Agrochemical & Seeds International Company,at the Manufacturing Technology Area,with responsiblities on:

Argentina, Buenos Aires, Los Cardales | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Polymer technologist

Hello I have had a great deal of laboratory experience in chemistry, both indoors and in the field. In the lab, I had successfully worked on synthesis and characterization of waterborne polyurethane dispersions based on polyether and polyester polyols. And characterized its Chemical, Physical and Thermal (TGA, DMA) behavior. Having good hand on Polyester composites based on glass fibers. I have sound knowledge about synthesis of different resins like epoxy, polyesters, acrylics, PF, UF, MF, polyurethane, and polyurethane acrylates at laboratory scale. Thank you for your consideration. I look forward to hearing from you. Sincerely, Dr.Sanket Jani 09724217853

India, Gujarat, India | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Researcher and Analyst

I am an experienced researcher with extensive background in geology and chemistry. I have worked as an energy analyst for a research and consulting firm to provide information and analysis on oil and gas production from "unconventional" formations in West Texas. I am an expert in writing technical reports and analytical summaries.

United States, TX, Cypress | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Johannes is a young and motivated researcher in the field of biosensors. Sparkling with ideas, he always comes up with new ways to implement latest scientific discoveries to solve every day problems or improve existing technology. Biography: While earning his master degree in chemistry at TUM (Munich, Germany), Johannes learned to use the basic chemistry tool-kit which he then used for this specilisation of polymers and construction chemicals. Johannes then continued research by doing a Ph.D. at DTU Nanotech (Lyngby, Denmark) in a different field. His project was the development of a modular point-of-care biosensor platform as a tool to make inexpensive diagnostics available for a broad public by reducing material costs and analysis time. Specialties: Biosensors Surface chemistry Polymer chemistry Microsystems engineering Surface characterisation

Denmark, Hovedstaden , Frederiksberg | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have a bachelor's degree in chemical engineering, a master's in polymer science and a MBA in manufacturing management. I have over twenty years of experience in multiple manufacturing environments.

United States, OH, Salem | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process Engineer, MATLAB and SAP

I hold a BSc Degree in Chemical Engineering and a MSc Degree in Process Engineering. Experienced in MATLAB Now working as SAP consultant. I help getting the simple things done in MATLAB and help with SAP

Italy, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Industrial Engineer,Chemical,Paper,Food Sci.,HDD

We are a team of full time employees in various experiences.All of us hold the Master Degree of Engineering of Industrial Engineer.Due to different experiences and different Bachelor degree holding,we can surf you right in various field including;Chemical Industry,Pulp and Paper Science,Food Science,Automotive Industry, Hard Disk Drive,Project Management, Logistic,Pricing,Quality Analysis&Control and any else related.

Singapore, Bangkok, Bangkok | Engineering & Manufacturing | Rating 0.0 (0 reviews)
analytical chemist

Over 20 years of experience in an analytical chemistry laboratory (crime laboratory), analyzing a wide variety of chemicals, both qualitative and comparative.

United States, WA, Tacoma | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Chromatography

A Pharmaceutical QC Chemist having experience at HPLC, GC, and different analytical techniques. Considered as General Quality Topics training instructor. Train different programms like HPLC , GC , GLP , Chromatography , Method analysis Validation. Very good user for Microsoft Office Excel , Word and PowerPoint.

Egypt, Aljiza, Cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Get best solution for your EE problems

Assign and forget your Electrical Engineering problem.. Get 100% original and correct solutions...for all EE all level (School, UG, PG) Get all your homework done here, all electrical engineering problems will be solved here with correct solution. Give it and forget it.

India, Haryana, Faridabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical electronics engineer and professional e

I am Proficient in C/C++, Assembly language, experience with Auto-Cad and Pro-E, proficient in use of development software: MATLAB, PSPICE, Visual C++, MIDE, Proteus, LabView, well experienced with use of Windows 7/XP and Linux. Experience with Adobe Photoshop, Adobe After-Effects, Microsoft Office. My objective is to come face to face with real world challenges and enhance my abilities to tackle them.To further enhance my managerial and communication skills in a business environment.To put my knowledge and skills to practical use in a research and development oriented environment Besides, I am a profeesional writer. I am blog writer, technical writer, story writer, academic writer etc.i have reviewed many papers. I am an expert in all type of writing skills.

Pakistan, North-West Frontier, Pakistan Kili | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Graduate in Chemical Engineering

India, Andhra Pradesh, Visakhapatnam | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional Engineer

17 years experience in Chemical Manufacturing with process design and improvement, EHS management, process safety management 9 years Environmental Engineering consultant with experience in leaking underground storage tank remediation, aboveground tank management and spill prevention, industrial wastewater treatment.

United States, FL, Fernandina Beach | Engineering & Manufacturing | Rating 0.0 (0 reviews)
your guide to the personal care industry!

Simply Formulas is a boutique personal care company that specializes in bringing small brands from concept to market. Whether you need a formulator, manufacturer, or guidance on testing and regulations, Simply Formulas knows everyone in the industry and is your one-stop-shop for the personal care and cosmetics industry!

United States, California, North Hollywood | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experts sourcing and supply chain management

Vikisourcing offers experts consulting and sourcing for all sections and products, manufacturing and quality control, helping you identify new suppliers, minimize costing to have the best price, whilst implementing and conducting third party quality control. Our team of local and international product sourcing and QC expert ensure that you receive an effective service and quality delivery.

Vietnam, null, Ho Chi Minh city | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical and Process Engineering Graduate

I am a determined and hardworking individual that executes tasks with efficiency and precision at all times. It is my aim to continuously strive for excellence and serve in a manner that will bring success to myself and my employer at all times.

Jamaica, Kingston, Kingston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Analytical Chemist,

Enthusiastic Chemist with more than 20+ years of experience with GC-FID, GCMS with GERSTEL MPS2, HPLC, Spectrophotometers, Ultra Moisture, Atomic Absorption, Sensory, Wet Chemistry, Stability analysis, and other bench analytical, R&D, Quality in Food &Beverage ,Flavor Analysis, Aroma Chemicals analysis Fragrances analysis and Essential oil’s

United States, FL, Sarasota | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert and Creative Writer and Proofreader

My scope of work 1. Technical Writing 2. Academic Writing 3. Editing 4. Report Writing 5. Article Writing I know the work of following softwares 1. LATEX 2. Microsoft Word 2007 3. Microsoft Power Point 2007 4. Microsoft Excel 2007 5. Microsoft Visio 2007 6. MATLAB 7. HYSYS I am a well educated passionate writer. I have the capability to write something new from my inside and my writing is always welcomed cordially by my clients. I am also an expert in online research and I do my job very deeply according to the provided guideline so that my client does not have any complain against me. I am also a good proofreader. I edit the documents very carefully taking enough time. I am a Chemical Engineer and for that I am also very good at writing technical reports with every details and in accurate form. I am honest, dedicated and punctual. My working procedure is perceivable, neat and clean.

Bangladesh, Dhaka, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical Process Analyst and Designer

I am a Chemical Engineer with Master Degree education background. I have experience in chemical process design, modelling, and analysis. I also have expertise in polymer material development. Some examples of my past work: feasibility study of petrochemical complex in west papua, Indonesia; Dangerous Good Distribution Survey in Indonesia; Asri Petrochemical Collaboration Project in Ethylene Plant Simulation Modelling; etc

Indonesia, Jawa Barat, Bandung | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have a strong biotech background with years of benchwork in protein chemistry labs, starting as early as 1998. I have also done some NMR imaging, cell culture, and DNA replication, along with years of protein cloning, isolation, and manipulation. More recently (in the past 4 years), while at home with my family, I have done part-time work that is primarily customer service. So in addition to the strong scientific background, I am able to communicate well with others both orally and in written form. I am primarily looking for a part-time position that centers on the area of biotechnology.

United States, NC, Cary | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Hi, I am Hemant Kumar Rattan over 5 years of experience in plant management, CRYOGENIC operations & maintenance, erection & commissioning, process enhancement and team management. I have sound knowledge of chemical engineering principles, processes, and development technologies. I have ability to guide and provide technical direction and supervision for a given project. I am excellent problem solving, analytical and logical thinking skills. I am good at interpersonal, communication and organizational skills with proven abilities in training & development, customer relationship management and planning. I’m always open to conversation, networking with like-minded professionals or discussing future prospects. Connect with me on Linked In or contact me at;

India, Gujarat, Dahej | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a licensed Chemical Engineer graduated at the University of the Philippines Los Ba¿os (UPLB). I am currently working as a Research Associate II at the Department of Chemical Engineering UPLB. I have been involved in several research projects particularly working on biofuels and biogas plant designs, equipment designs, experimentations and technical research and report writing. I also have had part time jobs as technical report writer and book writer/contributor.

Philippines, Laguna, Sta. Rosa | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Experienced Oil and Gas Multi-discipline Senior Engineer, Process and Mechanical design Specialist.

Nigeria, Lagos, Lagos | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have good experience in Chemical and Process Engineering

Kenya, Kenya, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process Engineer, Matlab Programmer

I have done modeling and simulation mainly in chemical engineering field by using well known commercial software such as Excel, MATLAB, Aspene-Hysys, and FlexPDE. The problems involved wide range topics from mass and energy balance to solving system of differential equations. I am expecting clients who have chemical engineering related projects.

Indonesia, Jawa Barat, Banten | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chem Eng Student with Great Computer Skills

I am a chemical engineering student in my senior year. Great technical and computer skills!

Canada, Nova Scotia, Sydney Mines | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Chemist who has delivered technical solutions in a variety of industries.

United States, MD, Cockeysville | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Professional Engineer with over eight years of experience in chemical manufacturing environment. An innovative, efficient and resourceful individual with an excellent sense of teamwork. Specialties: cGMP, Lean Manufacturing, Six Sigma Green Belt

Canada, Ontario, Waterloo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Jessica Guerschanik, Quality Mangement - G.M.P.

Master in Business Administration (MBA), Universidad Torcuato di Tella. Chemical Engineer (6 years long), Universidad Tecnologica Nacional - FRBA. MAJOR ACCOMPLISHMENTS: Managed the implementation of GMP Standards, ISO 9001, in order to comply with international organisms, and facilitate the competitiveness of the company. Established new policies and procedures, as well as necessary changes, to harmonize with the QMS of our different customers. Coordinated staff qualifications at all levels of the organization, through training, dissemination of new policies and assessment of compliance. Lead Internal Audits. Trained, qualify and selected the audit group members. Implemented the System of Validations and Qualifications according to the GMP requirements. Lead the clean room suitability, to GMP Standards and ISO 14644 compliance: plant project, work planning, contracting suppliers and construction supervision. Fluent English and Hebrew.

Argentina, Buenos Aires F.D., Buenos Aires | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Multi-dimensional, Hands-on Chemical Engineer

B.S and M.S. in Chemical Engineering Strong engineering educational background complemented by over ten years of engineering experience in the industries of paint/coatings, aerospace, department of defense & metal working. Specific expertise in nickel plating, dry film lubricant application, metal heat treating, passivation, titanium etching, electromechanical removal of metal, alkaline cleaning, design of experiments, analysis, field research, and ANOVA, regulatory compliance, ISO & SPC tools, evaluation projects, technical writing, root cause analysis, Project Management Best Practices, Process Optimization, and FMEA/5 Why/8D/A3 tools. Computer skilled in Minitab, CHEMCAD, MATLAB, AutoCAD, Rhino 3D Modeling, Microsoft Project, Microsoft Visio, Microsoft Access, Data Access Studio, Microsoft SQL Server, Crystal Reports, and Microsoft Office Suite.

United States, NY, Bronx | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical engineering and excel expert

chemical engineer with Reliance group

India, Maharashtra, Alibag | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Experienced chemical engineer - process designer. Have license for chemical engineering simulation software.

Israel, Haifa District, Haifa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experience Manufacturing Engineer

A Manufacturing Engineer with nearly 5 years experience helping retail brands develop, test and release new products. With a background in Chemical Engineering and a wide array of projects under my belt, I am the equipped with the perfect background to adapt to any industry.

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Process Engineer

Chemical Engineer. Oil and Gas Production Especialist Postgrade. Proactive and results oriented engineering professional with strong technical skills and 9 years of working experience as a Process Engineer for the Oil and Gas Upstream industry, including Engineering and Oil and Gas Operation Companies in the areas of EPC, Field Development and Operations. Involved in projects and operations in different Oil and Gas Production fields in American countries. - Process simulation in upstream, downstream and petrochemical processing plants. HYsys, PRO II, HTRI, Pipephase, Pipesim, LedaFlow, Flaresim. - Basic engineering: mass and energy balances, equipment design (separators, pumps, compressors, heat exchangers, process heaters), engineering specification for the construction and purchase of process equipment. PFD, PID and layout definition and preparation. Process instruments specification (control and safety valves). FLow Assurance. - Project evaluation. - Well performance

Argentina, Buenos Aires F.D., Buenos Aires | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Colorant chemistry: dyes and pigments.

Chemist with successful inventions relating to colorants industry: Pigments and Dyes. Solution preparations, dispersions, solid solutions. Keen understanding of manufacturing methods and third party manufacturing resources available in North America. Extensive worldwide travel and contacts to manufacture in Americas, Europe, and Asia.

United States, IN, Schererville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hydraulic and Heat exchange Engineer

Chemical Engineer 40 yrs exp - Coordination or been part over 180 projects for industry and building utilities. All Project stages like conceptual, basic and detailed engineering, purchasing, control cost, construction and planning activities. Both sides as client and work executor. Strong knowledge on process and mechanical design.

Mexico, Distrito Federal, Mexico | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a 23 years old chemical engineering student , skilled in CAD especially SolidWorks and I am being familiar in engineering and general science related topics. I speak three languages : Romanian , Hungarian and English on an academic level , I also consider myself a good translator , writer. I love brainstorming , if you want an open minded guy for all kinds of tasks , I am your man !

Romania, Cluj, Cluj-Napoca | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Analytical Chemist,excellent Quality Control skill

I have a Bachelors degree in Analytical Chemistry and as such have acquired excellent research and analytical skills through out the course. My background in Chemistry is extensive. My objective is to integrate skills and talents I have and those I continue to acquire,in service above self, to nuture and help raise generations of skilled and productive people who advocate for sustainable development. I would love the chance to bring my skills,knowledge and abilities to your work and achieve this objective.

Kenya, Nairobi Area, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CFSP, NEBOSH,C-Class H&S Specialist

Duties as a Senior Process Engineer: - Specifying specifications for newly procured units and equipment. - Preparations of statements of requirement for refinery development projects. - Troubleshooting process units upsets. - Supervision of the performance and economics of refinery’s process units. - Supervision of the procurement of catalysts and chemicals. - Addressing refinery process units corrosion related issues. - Leading the refinery units control system modernization project. Process Safety Management duties : - Team leader for major refinery accidents investigations. - Reviewing functional integrity issues for new and old safety instrumented systems. - Preparation and conducting training courses for the Operation staff. - Leading HAZOP studies and conducting various qualitative risk assessments. - Participation in Pre-Startup Safety Reviews. - Reviewing standard operating procedures.

Jordan, null, Amman | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have been working on Polymer Chemistry, Polymer composite materials and Natural Essential oils for more than 15 years. I have a good skills and experience in designing experimental trials for research project, research and development planning to order of clients, or in running a Chemical laboratory. My qualification have been approved by Engineers Australia. I am now a permanent resident and have a right to work full time in Australia. I have a Victorian driving licence. My strength is known as a hard-working, loyal and well-organized person. I am looking for a permanent jobs relating to Chemical Manufacturing or Chemistry discipline. I can be a good candidate for position of a Laboratory technician, a Technical assistant or a technical employee in either Research Institute or Manufacturing companies. I am a fast learner and dedicated to my work. I can work on multiple projects with effective time management and prioritisation.

Australia, Victoria, Melbourne | Engineering & Manufacturing | Rating 0.0 (0 reviews)

•Experienced Lab manager/supervisor that is active in sales support •Recently used ICP, titrations, GC, UV-Vis, and HPLC. Familiar with many analytical methods and instruments •Well versed in writing, editing, and following standard operating procedures (SOP) safely in the lab. Analytical improvements and developments were part of the processes. •Knowledgeable about brewing, alkanolamines, glycols, polymers, and water treatment; especially with electrocoagulation •Most of the previous positions required research and development of processes and products. The lab work was well organized and detailed into lab books and reports. •Well versed with Microsoft Office applications: Word, Excel, Power Point, and Outlook

United States, IL, Cambria | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Aim to specialist as process engineer in oil and gas industry site works worldwide

Malaysia, Terengganu, Kuala Terengganu | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced chemist

I am a skilled and experienced chemist with over 30 years of industry successes in a variety of roles. I have functioned in environments from production to research and bring a flexible and innovative approach to solving all challenges.

United States, ID, Sandpoint | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Rich mix of Engineering and writing skill

Post graduate in chemical engineer and wide interest and skill in area related to technology, Environment and safety.

India, KERALA, ERNAKULAM | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Product and equipment design and drawings

Experienced design engineer and 3D drafter Thermodynamics and Fluid dynamics specialist In excess of 35 years experience in providing custom solutions to clients. Industries include - Beverage, Chemical Process, Machine Rooms, Milling, Plastics, Bulk Material handling. Product and system design, engineered to appropriate standards. Equipment using fans, blowers, filters, vacuum, tanks, controllers etc Equipment using refrigeration, heat exchangers, pressure vessels, pumps etc Structures, platforms , ladders etc

Australia, Queensland, Birkdale | Engineering & Manufacturing | Rating 0.0 (0 reviews)
completed master degree in industrial chemistry

I Completed my graduation in chemistry and I did masters in industrial chemistry. Having 1 years experience working in a plastic manufacturing company as engineer...

India, Rajasthan, Alwar | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Cryogenics, Process Engineer

Hello, first things first: - eng. degree in Chemical and Process Engineering (created a VBA software to aid designing processes) - ongoing master's degree in Refrigeration & Cryogenics in English language at Wroclaw University of Techn.

Poland, Dolnolskie, Wrocaw | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mathematic Chemistry Solver Writer

My name is Fannol Muriq. I live in Norway, but I am originally from Albania. I study Architectural engineering. I understand math, chemistry and physics quite well. I can speak and write three languages, Albanian, Norwegian and English. I manage AutoCAD as well. I study in northern Norway, so I have a good opportunity to take good photos of the Northern Lights, if you enjoy the beauty of nature. I am also a bodybuilder, like to train a lot. So if you need help with something to do with training I am the right person.

Norway, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am chemical and biological researcher

I did master degree in organic chemistry and doctorate degree in biochemistry. So I can carryout my duty in chemical and biological engineering

Korea, Republic of, Seoul, Seoul | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Chemical Engineer (MEng) with 8 years oil and gas experience working for the largest publicly owned EPCM in the world. Highly motivated person with an enquiring and analytical mind. Enjoys the challenging of program solving and communicates effectively to deliver client-focused solutions.

United Kingdom, Surrey, Camberley | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded Systems Engineer MsEE PE

R&D product designer - concept to production. MsEE and Professional Engineer. Advanced skills include Design/Analysis of Analog Circuits, ALTIUM PCB Design, Digital Signal Processing, Control Systems, Machine Learning, Robotics Systems, Motor Control, Chemical Plant Controls, Adaptive Systems and Artificial Intelligence.

United States, CO, Broomfield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in CFD /FEA /Heat transfer/Flow/Radiation/

Expert in CFD /FEA /Heat transfer /Flow /Radiation/ ANSYS/ CFX/ Fluent/ OpenFOAM/ CFD-ACE+/ Meshing/ product development / Engineering/ Modeling/ R&D/ Simulation

United States, DE, Hockessin | Engineering & Manufacturing | Rating 5.0 (3 reviews)
Excel Spreadsheets, Technical & Academic Writing

I have many years of varied consulting experience as well as teaching and administrative experience in higher education. I've written many journal articles, presentations, and a wide variety of reports. I'm currently active in technical writing and preparation of spreadsheets for engineering calculations that are sold through my website, I've recently authored over a dozen on-line courses for engineering continuing education. I also, recently had a non-fiction book published: "Tunakumbuka (We Remember): Our Time in Tanzania as Peace Corps Volunteers" I've now completed over twenty Elance writing and engineering projects very successfully, including technical writing, academic writing, and Excel spreadsheet preparation, with excellent feedback. I am very conscientious about meeting deadlines, doing high quality work, and meeting the client's needs.

United States, AZ, Tolleson | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced & Practical Mechanical Design Engineer

As an experienced Mechanical Engineer, my passion is to solve engineering problems systematically and practically. I inherently seek for solutions that provide the quickest, most effective and simplest means to achieve my client's desired results. I offer my clients who cannot afford a staffed engineer, the access to an experienced mechanical engineer. I am capable of taking a client's concept and developing it into a fully functional and practical product or process. I am not opposed to traveling onsite and "getting mud on my hands" so that I can put my eyes on a project opportunity.

United States, TN, Pikeville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
MBA - EPC Project Engineer

Extensive experience within International Companies operating in the Oil&Gas Industry. Now Project Coordinator for Engineering, Procurement and Construction (EPC) Projects (Jacket, Topsides, Living Quarters,…) both onshore and offshore. Highly motivated, after several experiences as middle manager, I complete my knowledge with an Executive MBA to achieve my full potential and make the difference facing new challenges and experiences.

Italy, Emilia-Romagna, Ravenna | Engineering & Manufacturing | Rating 0.0 (0 reviews)
GIS/Lidar Engineer,Customer care executive

DEEPAK SONI GIS/LIDAR Engineer B.Sc (Environment Science), M.Sc (GIS/Remote Sensing) Exp. 1 Year Nr. Dr. Mahanand Sharma house, Muskan Beauty Parlour, Ray Colony, BARMER( 344001), Rajasthan, Contact No.: --, E-mail: -- EDUCATION QUALIFICATION 16/06/2012 – 24/05/2014 Department of Technology, CEPT University Postgraduate degree (M.Sc) in Geomatics and Space Application. 05/06/2008 – 04/07/2011 N.V. Patel college of pure and applied science (S.P. University), Anand,Gujarat B.Sc in Environment Science with 75% marks. 06/07/2007 – 29/05/2008 Sr. Sec. School, Station Road, Barmer, Rajasthan HSC in Physics, Chemistry, Biology with 62% marks. 16/06/2006 – 24/06/2007 Sr. Sec. School,Gandhi chowk, Barmer, Rajasthan SSC with 79% marks. WORK HISTORY 08/10/12- 09/12/12 CEPT University, Ahmedabad, Gujarat • Survey of “Chandkheda Area of Ahmedabad

India, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
An Engineering Solutions

An Aid Engineering is a innovative company providing engineering, drafting and information technology enables (ITES) services to the architect, structural engineering and construction companies through the world. Located in the suburb of Baroda India, An Aid offers extremely cost-effective services and more importantly takes advantage of the time difference between India and its clients location to offer shorter project turn around time. We believe that the cost-effectiveness and quick turn around time offered by An Aid will significantly enhance the competitiveness of our clients.

India, Gujarat, Baroda | Engineering & Manufacturing | Rating 4.0 (2 reviews)
Expert in packaging development

Manage team of 30 packaging country managers within Middle East and Africa region in support of packaging programs & operations. Act as first point of contact for all technical project launches and specification issues, production trial and test procedures. In charge of technical audit and approval of any packaging supplier & moldmaker. Cross-Functional team Leadership (technical topics). Set up programs for team development and regular technical training. Manage team of 30 managers (it has to include packaging & quality control managers) within Middle East and Africa region in support of packaging programs & operations. Act as first point of contact for all technical project launches and specification issues, production trial and test procedures. In charge of technical audit and approval of any packaging supplier & moldmaker. Cross-Functional team Leadership (technical topics). Set up programs for team development and regular technical training.

Algeria, Algiers, Algiers | Engineering & Manufacturing | Rating 0.0 (0 reviews)
'Academic writing help','Engineering and Design'

I am a talented and enthusiastic Aerospace Engineering graduate with handful of knowledge related to aerospace, materials, Electrical & Electronic streams . I am quite interested in taking tasks that are of multi-domain background and i am sure i live up to satisfaction of the clients. I have experience in research based projects in aerospace and materials domain for about seven years and i assure it helps me in giving you an excellent professional experience.

India, Tamil Nadu, Perundurai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Senior Electrical Engineer

Senior Electrical Engineer, for NASA at Kennedy Space System here are some of duties performed: - Conducted engineering studies and analysis for NASA Space Shuttle guidance support systems, cryogenic, and flammable chemicals. - Provide technical assistance to NASA for design, test and evaluation of landing, air navigation and facility support systems. - Prepared detailed and complex engineering packages to access impact of existing and proposed system integration and modification. - Recommended design changes to facility power system including standby and uninterruptible power systems. - Evaluated facility mishaps, system failures to prevent recurrence by formulating alternatives or recommending design changes.

United States, FL, Jacksonville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineering

I am a mechanical engineer and studied at Newcastle University.

United Kingdom, Punjab, Rawalpindi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Creative Design Engineer

Graduated from University of Maryland with a degree in Chemical Engineering, and currently a design engineer with sourcing bids and offering high value service for motivated individuals trying to make their idea a reality.

United States, MD, Baltimore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil Engineer,Expert in Documentation and Maths

I have completed my graduation on Civil Engineering in the year of 2011 from BESU, Shibpur which is India's oldest civil engineering college.I have worked for 3 years in Afcons Infrastructure Ltd. one of the most leading construction company at present in India and overseas also. I mainly look after the quality control and quality assurance of the structure and their materials. I have done 1 underground metro project, 1 elevated metro project, NH-1A in jammu-udhampur and 1 flyover also. I have detail knowledge in Microsoft Office. I am also good in mathematics. I think my experience and knowledge will be helpful to many people who will show their trust on me.

India, Bengal, Kolkata | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Practicing civil engineer

I am Civil Engineer with Experience in almost all branches of civil engineering I participated in a lot of civil engineering projects that require Design, analysis, estimation and costing, technical supervision, project management and staff administration.

Nigeria, Bauchi state, Bauchi | Engineering & Manufacturing | Rating 2.7 (1 reviews)
Chemical product and process development

We are a small team of dedicated chemical engineers, each with more than 10 years experience in project based research and product development. Our areas of expertise include biotechnology, nanotechnology, formulation and protein chemistry, process optimization, chemical production processes - all in lab, pilot and production scale. Apart from our technical expertise we are very strong in project and process management, LEAN, innovation. Powerful analytical skills coupled with a natural creativity and curiosity.

Denmark, Midtjylland, Holstebro | Engineering & Manufacturing | Rating 4.7 (1 reviews)
Design Engineer

Process, Mechanical and Civil structure Design Engineer, capable of design any equipment used in oil and gas plants, fertilizer plants, chemical plant sector etc. Equipments include Pressure vessels, Shell and Tube Heat exchangers, Storage Tanks, Vent Stacks or chimneys All equipments and structures are designed using latest softwares HTRI, Staad Pro, Compress, PV Elite, Aspen HTFS EDR, Stackdes and self made excel sheets etc Proficient in other drafting and 3D Modelling Softwares like AutoCAD, SolidWorks, Solid Edge, Inventor, Pro E etc.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Expert AutoCad ,RetScreeen,Solid works,

My last job in an International company named Metec allowed me to become a specialist in Autocad and industrial equipment. I m a chemical –process engineer .I have a strong background in inorganic chemistry , different analysis in the laboratory and manufacturing processes of petroleum chemistry, my responsibilities include designing and sizing industrial equipment and laboratory analysis .My education allowed me to be specialized in renewable energy ,chemical and biochemical processes in which raw materials undergo change, and involves scaling up processes from the laboratory into the processing plant. Responsibilities involve designing equipment, understanding the reactions taking place, installing control systems, and starting, running and upgrading the processes. Environmental protection and health and safety aspects are also significant concerns.

Tunisia, Tunisia, Bizerte | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Scientist with exceptional technical skills, practical experience and comprehensive understanding of the unlimited commercial potential and humanistic value of chemical research and development activities. Strong aptitude for applying new technologies. Experienced in planning, conducting, managing and documenting full-scale project lifecycles. Successful in achieving technical, financial productivity and quality goals. Strong team-building and leadership skills...analytical, innovative and resourceful.

United States, MI, Holland | Engineering & Manufacturing | Rating 0.0 (0 reviews)
UI/UX - Video Explainers - Mobile Games - SEO - 3D

Trusted by dozens of Fortune500 Clients. Award worthy 2D video explainers / Corporate videos / RSA Whiteboards / Corporate Identity kits, 3D Animations, Infographics, Websites. We are also proud to offer stunning Mobile UI design services as well as full Game and App development for IOs and Android. Our team of seasoned translators is also available to take your Company to a Global level. We specialize in Medical / Legal / Marketing and Engineering Translation. No generalists here, we work only with seasoned experts. ---- Our international Project Managers speak English - French - Italian - Spanish ----- Our services : - Infographics - Medical / Legal / Chemical / Financial / IT Translations (all language pairs available) - Market Research - Games development - UI Design and UX Design - 2D/3D Cartoon Animations - Whiteboard / Scribe Animations / RSA Whiteboard - Websites Development - Screencasts - Voice overs - SEO services - E-learning modules dev

Canada, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in process engineering calculations

I am a Post graduate in Process engineering and plant design and interested to work with passion and complete the task correctly in scheduled time.

India, Maharashtra, Navi Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Concrete Technologist, Engineering Geologist

I’ve a degree in geology, technical application (engineering geology/geotechnical), I'm currently employed as a technologist in a primary concrete company. I work also as a freelance geologist-geotechnicist. During these years i got talent in concrete engineering and quality management, i've operated as a concrete surveyor and troubleshooter in many different surface and underground building sites. Currently I work in the technical laboratory of the North Italy commercial area, placed in Milan. I coordinate: the preparation and generation of concrete mix design for standard and special, tests on fresh and hardened concrete, analysis on the aggregates, technological assistance on building sites, monitoring efficiency of concrete plants, quality control (FPC: Factory Production Control). Also I give support to the head quality manager (HQM) as corporate internal auditor for ISO9001 quality control, corporate internal auditor for the factory production control FPC.

Italy, Italy, lomagna | Engineering & Manufacturing | Rating 0.0 (0 reviews)

10 Years manufacturing experience. Passionate about root cause analysis, with emphasis on engineering prevention. Honest

United States, MN, Cottage Grove | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Energy engineer looking to apply Excel skills

Energy engineer working for an industrial energy company in the UK. I offer an advanced understanding of energy, Excel and optimization. Looking to apply my skills to all business problems. I would be very interested in creating optimization models for clients.

United Kingdom, Yorkshire, Sheffield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
smart engineer

I am a mechanical engineer. Specialized in automobile affairs. I have been working in different environments and I have a flexible character. I have done every responsibility I had very well.

United Kingdom, west yorkshire, Leeds | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expt Optimization, mathematical modeling, S/w dev

A dynamic professional with 7 years of experience in Refinery planning and scheduling, Process Simulation, Modelling, Development of Mathematical Solutions and Software Development. Successfully functioned as System Architect / Technical Lead for various software products & projects. Gained working exposure on Windows based systems like VB 6, VB.Net, C++ / CLI, Java with design and development experience. Developed complex mathematical models in LP, NLP, MINLP, Neural Network, Genetic Algorithm, etc. Worked on packages like HYSYS, Petro Sit, HTFS, FRNC etc. Hold a distinction for working in United Kingdom, USA, Qatar, Russia, Singapore for full time project implementation; adept in stabilizing smooth process in various software implementations. An effective communicator with excellent relationship management skills and strong analytical, leadership, decision making, problem solving & organizational abilities

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Wastewater engineering

Wastewater engineer whit experience on activated sludge system

Brazil, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD, Pro/Engineer Designer

Mechanical Engineer with around four years of industrial experience. Specialty in AutoCAD, Pro/Engineer designing

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Creative problem solver

"Dream big, work hard and make it happen" is what I usually heard from others but I prefer to push my boundary further. I will have a bigger dream, work harder and make it happen faster. As a consultant in the energy industry, I want to be part of the solution to this global challenge. One tree cannot form a forest, neither can an individual solve the world's problem. I believe in effective team working, and I had demonstrated such qualities in various team competitions and worked in multi-disciplinary projects. As much as I like to share my passion, I am always keen to learn, and transform my experience and knowledge into a creative solution to a problem. Solving a problem is like solving a puzzle, and what I will do when solving a puzzle is to start with the frame, defining the picture I am solving, and patiently start form a small part of the picture and link them up at the end.

United Kingdom, null, London | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Specialist Mechanical Engineering company

We are your trusted partner for Pressure Vessel, Heat Exchanger & Storage Tank Design, Detailed Fabrication Drawings, Inspection of Pressure Vessels, etc. We also Under take FEA for Pressure Vessels using PRO/Mechanica. Our rich experience in the above areas pertaining to Petro Chemical plants, Oil & Gas, Pharmaceutical, Biotech and Bio-Diesel among others will give our customer a cutting edge. Established in 2007, BRN Engineering Service is engaged In Design, Detailing and Inspection of Pressure Vessel / Storage Tanks and Piping Fabrication Activities in conformance with the requirements of International Codes & Standards like ASME, API, BS, TEMA etc. We use PV Elite for Pressure Vessel & Heat Exchanger Mechanical Design Calculation and COADE TANK for API 650 Storage tank Mechanical Design Calculation. Highly Qualified and Experienced Professionals who are familiar with Pharmaceutical, Biotech, Petro Chemical, Bio Fuel, Oil & Gas Process Equipments & Piping.

India, Tamilnadu, Chennai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Design engineer, materiel science

I'm material science engineer, with more then 8 years working experience in SolidWorks and AutoCAD programs. Previously working a lot with vacuum technique, crystal grow equipment, silicon purification. My working interest are additive manufacturing, solar technologies and electric vehicles.

Ukraine, Kyiv, Kyiv | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical engineer

I'm studing petroleum refining and petrochemical engineering.

Egypt, El-Behera, Kom Hamada | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineer from IIT Delhi and MBA from ISB Hydeeraba

I am engineer from IIT Delhi and MBA Grad from ISB Hyderabad.

India, Uttar Pradesh, Lucknow City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electromechanical engineer specialized in energeti

I am an electromechanical engineer, three years ago I finished a master's degree in energetics and now I work in a refinery, multinational company, activ in instrumentation and control domain and I'm support for multiple plants. In the past I worked as a designer at a company where we execute projects in autocad electrical, sanitary, but also for natural gas. I believe that the work done cheaper and faster will never be good quality; And the work done cheaper and quality will never be fast; A fast and quality work will not be cheap.

Romania, Constanta, Navodari | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PhD Researcher in Chemical Engineering

- Associate researcher on the project called “New industrial and environmental aspects of chemical thermodynamics to improve chemical processes with multiphase and multicomponent systems” - from 2011 till present. - Participating in teaching. - Published papers in prestigious international journals.

Serbia, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Analytical chemistry technician

i can do some chemical solid/liquid preparations and some quantitative analysis test like the D.O Test, Titration Analysis, Gravimetry Test and Water hardness Test

Philippines, Calabarzon, Taguig | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am experts on Civil Engineering Services

I am working in the field of Civil Engineering since 2010 for projects involving civil/structural engineering and design for the refining and petrochemical power and steel industries, including grading drainage, buildings, foundations, and structural steel. Overall three year experience in the field of structural engineering related to power, chemical and petroleum industries. Experience includes static and dynamic analysis and design of heavy structures and foundations, Finite element analysis of structures and components, Three Dimensional modeling.

Bangladesh, Dhaka, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Product engineer to satisfy your need!

Handles details, coordinates tasks, punctual, manages projects effectively, meets deadlines, sets goals, keeps control over budget, plans and arranges activities.

Serbia, Central Serbia, Pirot | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert maths ,engineering drawing,phyics,chemistry

in 10th i got 81%,in +2 85%,i pursuing engineering in lovely professional university

India, punjab, jalandhar | Engineering & Manufacturing | Rating 0.0 (0 reviews)