I'm a young freelancer with over 7 years work experience in civil engineering and design/architecture. For the past 7 years I've been working for a design and architecture company, modeling all kind of buildings, ranging from residential houses to office buildings, at any scale. I also create all the construction and architectural drawings, like elevation plans, foundation plans, floor plans, roof plans, plumbing plans, and others. My work is generally done in ArchiCAD, but sometimes I also turn to AutoCAD and Photoshop if required.
Over 10 years of experience working for a large A&E firm on Municipal, Commercial, Industrial, Power, Transmission and Distribution, Wastewater treatment, airport and military projects. Responsible for project management, proposal writing, scope of work and contract preparation, budget estimating, Bill of materials and quantity takeoff, concept design, master planning, QA/QC and site works. Structural analysis and design experience with structural steel, concrete, masonry and wood for structures including highway and pedestrian bridges, utility tunnels, wood and steel decks and platforms, friction and end bearing piles, large equipment foundations, concrete tanks and utility vaults, retaining walls, steel fuel storage tanks, warehouses and aircraft hangars, etc. Software background highlights Google SketchUp Autocad Mathcad Staad SquareSpace Shopify Google Analytics and Adwords MS Office
MONTE VISTA CIVIL ENGINEERING is a civil engineering design firm primarily serving clients in Southern California, We specialize in Urban Redevelopment and Low Impact Development projects in the Residential, Commercial, and Public Works sectors. At MONTE VISTA CIVIL ENGINEERING, INC. we partner with our clients to see each project as a whole, and proactively offer solutions to our clients needs. This approach results in an open, collaborative design process that ensures quality project delivery. For more information, visit www.MonteVistaEngineering.com.
If you need detailed Civil Engineering Drawings(Architectural,Structural,Electrical,Plumbing & Sewerage) , then i can prove to be your best choice. Moreover you can also consult me for Vetting and Seismic Evaluation Assessment of Buildings (Repair and Rehabilitation).
Hello, You have problem related to Civil Engineering. You need a experienced engineer to solve your problem. You have so many problem including Structural Design, Architectural Design, Steel Structural Design,Material takeoff, Cost estimation etc. You need a reliable Engineer. That's may be me. I have Experience in The above Civil Engineering Sector. I am determined to fulfill my client requirement. I have knowledge of the following software: -Etabs -Staad Pro -Auto CAD -Revit Architecture -RCC Solution -Gear -SAFE -GRASP -MS Office Program
I'm a structural engineer, I have experienced in various commercial building (hotel/office) and residential building. My specialization is design of reinforced concrete (RC) structure, steel structure, and steel reinforced concrete (SRC) Structure. I'm now Master student in National Taiwan University of Science and Technology (NTUST), Taipei, Taiwan. Hopefully, I will build my career as a professional freelancer in Elance, so that I will build long-term relationship with my clients. I'm a hardworking person and I always do my 110% in every project.
Hi, I am Harunur Rashid working as a senior structural design engineer in RB builders.I am BSC in civil engineering and MSC in structural engineering.I am very good in structural and Architectural design.Very fluent in Auto CAD,Etabs,Staad pro,Sap,revit,3ds Max,Ansys,
I am a qualified and experienced Civil Engineering Designer, worked for Mott Macdonald in Sydney, Australia for over 5 years. Now living in Brasil and working as 12d reseller. (Australian civil engineering software).
Experienced with Structural Design in compliance with British Standards. Familiar with SAP2000, STAAD Pro, MicroSTRAN for analysis and design of structures. With over five years of experience in AutoCAD, 3dsMax, Excel, VB, VBA, MSProject and over three years of experience as an industrial Civil Engineer, I'm trying to give an "Engineering Touch" to all the projects and inspire my clients, from the simplest CAD/Excel to Advanced Structural Designs.
I am a qualified Civil Engineer from Bangladesh. I am seasoned in quantity takeoffs, materials estimation and earthwork/site-works. I do provide any kind of structural analysis and design also. Moreover I am specialized in Structural and Geo-technical Engineering analysis, design and estimation.
Civil engineer experienced in civil site development using Autocad Land Desktop.
Always ready to accept new challenges and learn new things, anytime available for multiple tasks, open mind, fast and efficient. Ph. D, assistant professor, skilled structural engineer, with wide experience in structural and design analysis, FEM modeling, experimental earthquake shaking table tests, safety earthquake design, civil engineering consultancy. Wide experience in structural design of steel structures, reinforced concrete structures, masonry structures, wood structures, composite materials structures. Research activities, educational student competitions coordinating, structural engineering professional consultancy. Beside structural engineering skills I am also enthusiast in editing videos and photos, creating posters in photoshop or product presentations. True happiness comes from the joy of deeds well done, the zest of creating things new. - Antoine de Saint - Exupery, this is the motto that guides me.
Freelance Civil Engineering Professional for quantity take offs, costings, project scheduling, CAD and structural design projects. My goal is to provide excellent results as well as great working relationship with my clients. Time, quality, accuracy and professionalism are among my top priorities in this business.
looking for quality work output at a fair price,strict directions and deadlines contact me. I have an excellent reputation on all kinds of civil engineering projects.Highly talented and a hard worker.
Mr. Whitlock has worked in the Civil Engineering field for over 12 years. In those years, he has performed materials testing, site design, hydrology and hydraulics, dam inspections, stability analyses, web design, database development, erosion control planning and road design. He graduated from Clemson University with a B.S. in Civil Engineering in 2003. He is also a licensed Professional Engineer and GSWCC Level II (Erosion Control) in Georgia. In his addition to his professional activities, he also likes to use his creativity through other channels. His creations include website design, application development and the development of engineering calculators. Specialties: Hydrology and Hydraulics- Flood Plain Mapping (HEC-RAS or RiverCAD), Flood routing (Hydraflow and HEC-HMS), Flood Frequency (HEC-SSP, Dam Break Analysis (HEC-HMS and DAMBRK), Storm Design Site Design Dam Inspections
Civil Engineer, Solar Systems Designer, Renewable Energy Advocate, Natural Building Enthusiast
HI! I am a qualified civil engineer. I have finished faculty of civil engineering of Tirana, ALBANIA. I have worked in several project . My role position was in designing and drawing. I work with software Etabs, Tekla, Autocad . In european and american designing code
I am a civil engineer currently employed at a major Austrian construction company with over 10000 employees worldwide. I`m involved in several major infrastructure projects (highways construction and national roads rehabillitation) as Deputy Technical Manager. Therefore, my AutoCAD, road and structural design, civil engineering, planning and Excel skills are being daily improved. I can work daily several hours in my spare time on various construction/ engineering and design projects.
I am a Civil/Structural Engineer with solid experience in design, estimating, quantity surveying,water supply, sanitation, construction and project management. I have done both office and field work simultaneously for more than five years. I hold professional license as a Civil Engineer. I have an intensive 3 years experience as a Quantity Surveyor. I have engineering competitive experience in the following sectors in different capacities: - Residential Construction - Commercial Construction - Industrial Construction - Hospitality Industry - Public Works - Marine and Coastal Improvements - Oil and Gas Industry - Roads and Drainage - Fire Protection - Plumbing and Sanitation - Mining Industry I can do civil, architectural, structural and sanitary design, quantity surveying and estimating, CAD drafting and Excel jobs.
Seeking for job on line. I have the following: Civil Engineer,Management, Primavera Planner, Construction, Design, Supervising, Contracts / Procurement, Cost, Planning, Draftsman, Quantities Surveying and Quality Control. Good experience in Primavera Planner, MS-Project Planner, Google Sketch, 3D Models, 3D AutoCAD, websites manager, ads and website design.
I am a civil engineer licensed in Missouri and Kansas. Most of my engineering experience is in highway drainage. But really, I am so much more than your typical highway drainage engineer. For example, I am knowledgeable in the use of programs like HEC-HMS. Also, I recently completed a job that required beginner up to expert overall civil engineering knowledge. So whether you are an individual with drainage issues on your property, a firm that needs an H and H engineer, or are in need of a professional that can help you with your general civil engineering needs, I can meet and exceed your expectations! Thank you for trusting me to solve your problems!
Hi, My name is Sinisa Marjanac, engineer with some knowledge within Architecture, Structure, Hydro Engineering and Management area. Beside FEA modeling, earthquake, wind and soil calculations, concrete, steel, timber and composite calculations on several codes, my scope of work include cost estimations and MS Project plans. I believe that great design, done by EKONS team, giving additional value to your project. In same time we will enjoy during exchanging knowledge with colleagues all around the world. Thanks :) Sinisa Marjanac
I am a civil engineer with over 15 years' experience. I am currently employed in storm water engineering, but have worked in land development (residential and commercial subdivisions), water supply and environmental engineering.
Region Design is a client-driven civil engineering consulting firm located in Orem, Utah. We specialize in providing the highest quality engineering design, planning, landscape and construction document preparation services for residential, commercial and municipal projects of all sizes.
Professional engineer with a masters degree in construction management from the Department of Civil Engineering, Virginia Polytechnic Institute and State University. Experience working for contractors and owners on a variety of construction projects, including residential developments, ship marine container terminals, buildings and facilities, and highway road and bridge projects. Experienced in construction administration, quality control and quality assurance contract compliance inspections, CPM scheduling and cost estimating. Extensive experience in the preparation, analysis and evaluation of contractor claims for delay, loss of productivity, scope changes and differing site conditions. Specialties Construction Management, Quality Control, Quality Assurance, CPM Scheduling, CPM Schedule Review, Cost Estimating, Claims Analysis, Constructability Analysis
Welcome to Civil & Structural Engineering Design Services. A multi-disciplined practice that provides a complete service for our clients and a coordinated and speedier delivery of services. We are dedicated to providing a professional and innovative service for our clients covering a wide variety of projects.
Masters Degree Education in Civil Engineering. 100% accuracy guaranteed and a quick turnaround -Autocad (any release) : Sketchup : -Residential/Commercial drawings (architectural, structural, mechanical, electrical, plumbing) -Static and Dynamic Structural Analysis (concrete, steel, timber design) -Energy Efficiency Analysis -Mechanical Engineering and Design -Graphic Design (posters, brochures, logos, etc) -Pdf to Autocad conversion -Space Planning -3D Modeling -Page and Book Layouts -Photo Editing -Analysis
Profession in civil engineering. Design and analysis of steel and reinforced concrete structures.
I have extensive knowledge of Computer Aided Design (CAD) drafting and detail design with an Advance Diploma of Civil Engineering and Structural Design in additional to a Civil Engineering Degree. With 6 years industry experience I have the knowledge and experience to produce the best possible outcome for your particular project. Having been in industry for a number of year has given me the opportunity of familiarise myself with a number of industry standards and specifications used daily for general consulting and design in the field of Engineering. I will provide professional input and communication ensuring that a positive outcome is achieved at all times. Guarantee of Quick turnover, minimal delays and contactable 24/7.
I am a civil engineer with 7 years of experience in licensing of private construction projects and their construction, the preparation of structural designs based on earthquake safety regulations, as well as overseeing its implementation.
Hello! My name is Stephanie and I'm a freelance Engineer from Australia. I'm adding to the Elance team with -- 6 years of experience using 2D AutoCAD software, focusing mainly on construction and land development -- strong attention to detail -- the ability to produce quality results within tight timeframes -- excellent written and verbal communication skills. I look forward to working with you!
Civil Engineer, design structure, AutoCad 2007, Structural Analysis, Sap2000, Etabs, etc.
civil Engineering more than 35 years experience Architect Designer with a strong engineering background. Great deal of experience in Building design, industrial design Skills: Architecture Home Design, Building Construction, CAD Drafting/Design, Civil Engineering
We are expert in providing cadoutsourcing wide range of CAD Outsourcing Services. We Provides Industry specific CAD Design, CAD Drawings and CAD Drafting Services to enable Drawing Services, and construction engineers to design and structure FIRMS buildings. We provide Computer Aided Design (CAD) services using 2D and 3D Modeling for CAD Conversion and Drafting With highly skilled staff members available, representing a range of expertise, we can provide exceptional service no matter the complexity or size of your project. Each member of our team is continuously trained to use state of the art technology Contact today for all of your CAD conversion, drafting and modeling needs or to learn more about our services and pricing.
I am currently employed at one big Austrian construction company on the planning, structural analysis, 2D/3D drawing and executing projects in the field of building construction and highways.
Providing Civil and other Engineering services: Geotechnical, Structural, Hydraulic Design, data analysis
Master's degree Civil Engineer interested in cooperation and dedicated to work.
I'm an Engineer from Bangladesh, having 13 years working experience in Design,planning, Drawing Architectural, working drawing & project Management . I am seeking employment where I can express the knowledge acquired in a practical way. I got the opportunity to work in some project in Bangladesh, I am very interested in working with you. With my education and work experience I meet requirements for performing any work that is assigned to me.I would be very pleased to have the chance to show my skills in your company.
I am a civil engineer by profession. I have architectural, civil and structural backgrounds. I have over 18 years solid background in design, drawing, detailing, layout, planning, estimating, construction, geodetic/topographic surveying. I am expert in Autocad 2D and 3D (10 years experience), Google Sketchup, 3D modelling and Vray rendering, STAADPro, Photoshop
A license Engineering specializing in the field of Civil Engineering specifically in the line of Construction, Mapping, Takeoff, Simulation and specific concerns about Engineering. With my past experiences, I have developed great analytical, technical, programming, problem solving skills which are inclined with my specialty. I'm a very approachable individual and working with you would certainly be a pleasure.
Over 9 years of intensive experience in positions including Lead Structural Design Engineer, Structural & Architectural Design Engineer, Technical Office Engineer, Project Engineer and Project Manager. I am skilled in all aspects of civil engineering, multiple project management from conception to completion, hands-on structural design and site supervision. Possessing highly developed technical expertise with full range of engineering and project management software knowledge.
My company is Sol Engineering, Inc and we are a licensed and insured Civil Engineering firm in San Diego, California. We are a small and efficient company that focuses on innovative and cost effective design and solutions for our clients. We have worked in San Diego for 8 years and specialize in Grading and Drainage Plans, Improvement Plans, Drainage Analysis and Design, Retaining Wall plans, Permit Processing, and Construction Management. We have designed and processed plans through nearly every local agency with the majority of our work being within the jurisdiction of City and County of San Diego. Please see our website for more information www.solengineering.com.
Hello!My name is Asen Stoyanov. I am a regular student in last term in Civil Engineering University.I have worked with AutoCAD for 8 years an I have certificate from my university.I can also worked with MS Office Software like Word,Excel.I have good skills in programs,based on Finite Elements Method like Sap2000, ANSYS. I also know the technological and mechanical aspects of the building process. I have developed lots of study projects - Roads, Railways , Bridges , Buildings ( with concrete and steel structures). I think I can do different engineering drawings; to work on different projects on design level ; static , dynamic analysis of different building structures using FEM software.In the high school (technical high school) I studied architecture and I have a look around this sphere.I also can handle geodetic instruments.
Civil Engineering from Brazil with a large knowledge in construction and cad drawing. Graduated and Master in progress.
Civil Engineer with over 15 experience in developing structural calculations, drawings and site consultancy.
My name is Marko Nakic and I am freshly graduated student, completed MSE degree in civil engineering, looking for a job. I am fully prepared for work in every segment in civil and structural engineering. I have high knowledge acquired through studies as being one of the best students in generation with high GPA.
Civil engineer with quality educational background, currently pursuing a Masters degree in Structural Engineering. Serious and dedicated, 100% focused on accuracy and quality!
A group of highly skilled passionate Civil Engineers, with vast design experience. Anything from houses, to roads and bridges. Nothing is too big or too small. If you have an ideea, we can make the design for it.
If you want your job to get done without frustration, in high quality then i am your man. Civil/ Structural Engineer Consultant BEng - MSc - MIStructE - MICE Wide range of experience in the construction industry, having involved in civil engineering projects within the construction, architectural and designing industries from planning, setting out through to overseeing site works. Website: http://zafeiropoulosnikos.wix.com/nickzaf
I am a civil/environmental water resources engineer licensed in Georgia,New York, North Carolina and Pennsylvania. I am currently employed in the capacity of the Director of Water for a Mineola, NY based full service AE&T firm. I was recently featured in the Long Island Business News: http://www.pageturnpro.com/Long-Island-Business-News/50184-Whos-Who-41913/index.html#4
Hello, I am a Civil Engineer. I have experience in Civil Engineering, Article Writing, Search Engine Optimization (SEO), Graphics Design, Logo Design, Data Entry, Word press and Virtual Assistance. I can handle any project effectively and timely. So hiring me for any project, will provide you the best outcome.
I'm Civil Engineer Expert in Draw and design concrete structure using Autocad Drawing program & Sap2000 Design program. Expert Ms office like word,excel,power point .
I am a civil engineer. I graduated at Technical University of Cluj-Napoca, civil engineering in 2013. I have learned to design civil, industrial and agricultural constructions.
Structural engineer with 3 years experience in production and planning.
I'm a civil engineer with experience in CAD (specifically Autodesk Civil 3D & Land Desktop), GIS, GPS surface modeling for machice control, and construction layout. I'm capable of designing subdivisions, commercial sites, and utility infrastructure.
Structural Civil Engineer
I'm a structural engineer, with ambitions for work in various types of construction projects.I specialize in design of RC and steel structures, for industrial and residential fields. I got employed in a government research facility for engineering (HBRC) in Cairo Egypt. where I learned evaluating and troubleshooting of several structural projects.I also worked for consulting groups in Cairo, contributing in structural design of ordinary industrial steel hangars, analysis and check of RC residential buildings, and other types of projects.Implementing the knowledge from research field into commercial use and troubleshooting.I'm ready to work with high quality output according to the desired standards. with expertise in design by international structural codes, in addition to skills of interpreting and coordination of adjacent drawings with the requested structural package. I have management skills to deliver jobs and tasks on dead lines.
I am certified Civil Engineer. I have an experience of 25 years Civil Engineering
I am a graduated structural engineer from Sri Lanka and I am willing to work as a structural and civil engineer in building designing, modeling and analyzing. Also I have thorough experience and practice in ETABS,SAP2000 and SAFE computer modeling. also hands on Master series and other structural engineering related software such as STAADpro, Autodesk Robort etc.
Civil and Structural Engineer with extensive AutoCAD and Autodesk Revit experience as well as professional knowledge of other CAD based softwares provides services in 2D and 3D designing and drafting of: -buildings construction as well as architecture presentations -exterior/interior and public spaces presentation -structural details - products presentations across a range of industries - as well as services in mapping of finished projects from paper to digital (DWG, PDF, JPEG etc.) format, depending on the wishes and needs of the client.
From my previous work here in the Philippines, I have learned various skills and experience as a civil engineer. I am very familiar in providing structural drawings in autocad in U.S. standard and calculations that comply to the current international code such as IBC 2009.
Professional Engineer in Structural analysis and design sector. Practicing in design of structures like Buildings, Towers, Poles, Retaining Walls, Foundation (deep & shallow) etc. Use software in practice like ETABS, SAP2000, SAFE, MS Tower, PLS-Tower, PLS-Pole, PLS-CADD, Prokon, AutoCAD, 3D Max. We have eight engineers and six drafts man. All are expert in their works.
RENCAD - high quality house plans and home design RENCAD provides solutions to customers who wish professionals quality house plans, home design and 3D screenings of their building projects. We work with architects, engineers and designers from around the world who are customer oriented and are intended to implement their visions in 3D pictures. At very competitive prices, RENCAD will help you better planning and design your house plans by offering you high quality home design renderings at a low cost. See exactly what are you payng for before the first brick is laid. Tell us your home design thoughts, furnishings options, colors and materials and we will give you realistic pictures of your final design.
A motivated project-centric management professional focused on developing and maintaining schedules, budgets, and quality control processes through assessments and problem solving on multi-disciplined public or private facility development programs. Factual, timely, and credible approach to written and personal communications that seek to build collaborations with owners, executives, consultants, contractors, and regulators that deliver productivity and revenue to meet business goals. I possess a calm, comprehensive, demeanor that synthesizes financial, technical, and regulatory structures to develop an approach relevant to all levels of public, private, and military audiences.
Licensed engineer with 12 years professional experience specializing in civil/site design for commercial, residential, and institutional land development projects. Proficient in all aspects of site design and construction document preparation, including site planning, roadway horizontal/vertical alignments, grading, stormwater management, water/wastewater systems, and erosion and sedimentation control. An expert in use of AutoCAD, AutoCAD Civil 3D, Microsoft Outlook, Excel, Word, Powerpoint, CorelDraw, Hydraflow Storm Sewers, and Hydraflow Hydrographs.
As a Project Manager in the heavy highway industry, I have managed projects ranging in size from $300,000 up to $35 million, with up to 10 projects running concurrently. I received a B.S. in Civil Engineering from Drexel University, 2009. with a concentration in Project Management. View my LinkedIn profile for additional information: http://www.linkedin.com/pub/stephen-carullo/50/401/586
I am Civil Engineer and administration Manager. I have Ten years experience in my field.
Do you ever feel overwhelmed? Like you don't know where to start? Do you constantly miss deadlines, meetings and important dates? Is you data tracking just down right confusing?? Well, I'm the girl you're looking for. With a swiftness, a touch of perfection and a knack for delivering a "mind-mapping" way for you to get back on track and stay on track. I can organize, remind, and enter data quicker and better than anyone I know. Let me help you help yourself! Not to mention I'm a Civil Engineer Graduate from Louisiana State University and I don't mind putting those skills to work! Need a tutor? Math-High school levels, Calculus I, II; Diff eq.; Physics-High school through College; Civil Engineering-Various Design Classes.
Bachelor ( S1) Civil Engineering Degree from University of Maranatha Christian, Bandung, West Java, Indonesia ( 1986 1993 ) Languages: Indonesia and English Computer : MS. Word, MS. Excel, MS. Power Point, MS. Windows, AutoCAD DC-1 / CGPX Project Five Hundred Thousand Man-Hours without Injury Plan project related to civil engineering work together with team until completion of the project DC-1 / CGPX Project Five Hundred Thousand Man-Hours without Injury ( Record-able Injury )
Hi. I am interested for any jobs in area of civil engineering. I have degree Bachelor with honours in civil engineering and good experience with work in AutoCad in this area. I was a part-time worker for company which is working on projects from Europe.
Complete service from concept to design calculations and certification. Providing civil and structural engineering solutions for all aspects of residential, commercial and industrial construction projects.
Civil engineer in wastewater and drinkwater treatment plants, pipelines, water supply networks. Also I have professional skills in 3d modelling and rendering. I am hardworking and a fast learner with good skills and knowledge.
I am a Civil Engineer, who has a strong knowledge in building projects from planning, design & analysis to implementation. I can managed different projects,(e.x. ive managed the Concreting works of 2 Mat footings with 3,000 & 7,500 cu.m. volume) I can and been engaged in planning and analysis using PERT, including Cost analysis. Communication has been applied and continually experienced by me in my work.(Its been an essential ingredient in every step of creating a project. CAD software has been of great help for me in my work. I have been able to play and have fun with it.
persistent, hard working, with various skills
I have 8 years of experience in the civil engineering field.I believe i can deliver the professionally detailed drawings as per clients' requirements.
Over 7 years of AutoCAD drafting and design experience. Drafting experience of pipelines, servicing, and skematics. Very proficient with Microsoft Office software and data. entry and spreadsheets
Broad experience in design & drafting steel and concrete structures for industrial, energy, oil & gas. Familiar with US Code: ACI-318, ANSI/AISC-360-05, ASCE 7, API 650. Software: STAAD-Pro, AutoCAD, Microsoft Office Excel.
Quick learner motivated & dedicated to get the job done right.Can cope well with simultaneous tasks.
Specializes in Design of Residential, Commercial and Industrial Buildings. Expertise in CADD Software i.e. ArchiCAD, AutoCAD, MathCAD, SketchUp, Staad.Pro, Autodesk Robot, SAP2000,MS Office, RISA-3D. In-Depth Knowlege of Codes & Standards i.e. ASTM, ACI, ASCE, AISC, EC, IBC Can provide Services for Building Design, Structural Modifications, Estimation/Quantity Take-Off, Project Scheduling, Tender and Construction Documentation.
"If You Want the Job Done Right, Hire a Professional." Over the last 7 years, I have completed a wide range of projects using Autocad, My competency lies in civil engineering and architectural design , and I am seeking opportunities to design and develop construction projects for you or your business. I also have experience in the following areas: 3D modeling and rendering using Autocad , quantity take-offs , structural design , curtain walls design, I would be grateful if you give me the chance to prove my skills.
I am mashkura sultana .I am a Civil Engineer.I graduated from Bangladesh University of Engineering & Technology in October 2009. I have good knowledge on Civil Engineering Subjects. I have skills on Civil & Geo-technical Engineering, MS Words,MS Excel, MS Power Point And Visual C++ Programming.I want to mention that i am a expert of Geo-Technical Engineering.I Performed my most projects on Geo-technical Engineering.I did a lot of works including many laboratory tests for performing my Geo tech projects. I am willing to work in Elance .I am very interested to work as a freelancer.
Highly motivated engineer passionate about computer modelling and simulation for industrial projects. Experienced in Finite Element Analysis (structural, mechanical, fluids and thermal design) and in setting and achieving goals under pressure, independently or in a high-performance engineering team. I combine a sound knowledge of civil engineering and computer science with excellent interpersonal skills to meet both clients' desires and community's needs. Do not hesitate to contact me to ask for sporadic consultancy or training. Specialties: Structures, Fluids, Computing.
I am a retired Civil Engineer cum Project Manager with 38 years working experience. I have been in the public sector for 31 years and in the Private sector for 7 years prior to retirement. I have administered many projects funded by the World Bank, The Canadian Red Cross , World Council of Credit Unions of the USA.
I am Civil Engineer having Masters degree. Have good experience in Structural Steel design and detailing in particular. I have more than 10 years of experience of working on projects related to Oil & Gas, Telecom Sector, and Process Industry. I have knowledge of American & British standards and software related to my area of expertise. I am highly motivated and hardworking individual in pursuit of achieving excellence in my career.
Professional Engineer (PE) with over seven years of experience in CAD, civil engineering, management and consulting.
I'm expert in MS Office, MS Excel, MS Project, PDF, HTML, Staad Pro. AutoCAD etc. I can provide services with 100% accuracy. I did many Steel Building design, Planning, Scheduling, Drawing and implemented on field. Have a vast experience on factory building and commercial building. Have some experiences on architectural field also as I have to liaison with them very often which makes me very realistic. Above all, as a Passionate Civil Engineer, I can take any challenge on Civil Engineering Field.
My work includes civil engineering, entitlement, surveying and construction management services for commercial and residential land development projects: attend project meetings, planning, entitlement, infrastructure design, construction management services, reports, project management, expert witness, engineering design, site grading, water systems, sewer systems, storm water drainage systems, transportation systems, signing/striping plans, cost estimates, value engineering, construction bid documents, contracting, running computer programs to facilitate engineering designs, report calculations, directing project team, inspections, permitting, contract administration, quality control, scheduling, estimates, process contractors pay requests, approval of construction, engineering certifications, survey certifications, consulting, marketing services, writing proposals, serving as engineer of record and principal.
I have completed my graduation in Civil Engineering. For over the last 15 years, I am working in Civil Engineering sector mainly in Drawing & Design of different structure, Estimate the Quantity, Reporting, Documentation, Data Entry and others. Now I am working as Project Engineer (Technical) in an International Non Government Organiza...
Motivated structural engineer (Bcs civil engineering) with strong design background. Provide full design and drawings. Powerfully using SAP and CAD. Able to deal with architectural issues. Fast learner and eager to learn.
Civil Structural Engineer. Several years experience in complex structural designs with the top Portuguese Architects.
Registered Professional Engineer in Pennsylvania with a Master's Degree in Civil Engineering that is available for consulting work.
9 years experience in Construction Industry (7 yrs as QA/QC Engineer in Gulf). Have wide knowledge in effective QA/QC, Planning & Site Management works. Experience in Prestigious Projects like New Doha International Airport Project ¿Qatar (Catering Facility Building, CP-21), Durrat Al Bahrain Resort Project ¿Bahrain (Construction of Villas with Swimming Pools), Delhi Metro Rail Corporation Project - India (Construction Of Elevated Stations). A dedicated Civil Engineer who wants to be innovative and technically skilled to perform as a topper in the challenging environment by creating and utilizing time as well as opportunities.
I am a Civil Engineer having 10 years of working experience in my field. My specific areas of expertise are Project Management, Project Control, Project Monitoring & Scheduling, Project Execution, Contracts. My Second working area is Web designing, I have over 2 years of experience in web designing, making site templates, Logos, Business Cards.
Telecommunication tower and power transmission tower design experience for over 9 years.
Always try to be professional is my ultimate target in life along with Honesty, creativity, excellence, experience & discipline. As I studied in civil engineering I would really love to do some work on AutoCAD drafting, 3d design. I did a few jobs in AutoCAD design locally and also designed some building using SAP, ETABS, GRASP, STAAD etc. Besides this I have vast experience in Data entry, Freelance writing, SMM, SEO, Email marketing etc.. On the other hand, I have chosen Elance as the ultimate challenge of the race of the online growing community where I want to devote myself with my Excellency, Experience, Honesty & commitment. If I get the opportunity to prove myself, I will be sure to cross Mile with my best performance ever.
I have 24 years of experience in the field of Civil Engineering Works & Environmental Management Projects.
We are dedicated CIVIL 3D DESIGNERS, with extensive experience in land development and infrastructure design.
I am a talented individual professional who graduated in BEng (Hons) Construction Engineering at the University of Teesside in UK, and I am a postgraduate at the MSc in Civil Engineering: Structural Engineering at the University of Nottingham in UK. Since 2006 I have been working in Crete Island at Civil Engineering, and Architectural firms. I have been involved with the design, supervision and construction of residential houses and multidisciplinary architectural practice. Since July 2013, I have been involved with Domestic Energy Inspection by performing energy audits and issuing energy classification certificates to buildings. I offer clients a unique blend of experience, design quality, project leadership, construction knowledge and professional service.
Mix of skills, knowledge and experiences adapted to your specific needs and requirements... Sincerely, Sinisa Marjanac Engineer
Structural calculations for US standards ASCE 7-05/10, AISC 341-05, ACI 318-08, Indian Standards IS 456, IS 875, IS 800. Excellent revit modeling and AutoCAD drafting skills. Will turn around projects on time.