Freelancers

Freelancers by Skills

1501-1600 of 4164 Professionals
Freelancers
Mechanical/ Civil - Product Design & Development

Set Global offers advanced Mechanical Engineering services to customers that help them in developing complex mechanical designs and products, significantly reduce their time-to-market and help them penetrate early and deep into the existing and emerging markets. Success in any product or equipment development requires technical knowledge, perspective and predictive vision, active participation and accountability. Created to exemplify these traits, Set Global is a global outsourced R&D, engineering and captive manufacturing services company focused on design, development and manufacturing complex products and equipment. With integrated engineering and manufacturing capabilities, Set Global mobilizes the right resources, skills, and partnerships to create and deliver sustainable business value to its clients seeking to outsource the design and/or manufacturing of their equipment or products.

India, Tamil Nadu, Erode | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I can teach Geotechnical Engineering

Hold a Doctoral Degree in Civil/ Geotechnical Engineering. I have been teaching Geotechnical Engineering for over 20 years. I have been a consulting Geotechnical Engineer for quite sometime now. My target audience were students, employees pursuing degrees part-time.

India, Andhra Pradesh, Visakhapatnam | Engineering & Manufacturing | Rating 0.0 (0 reviews)
2D & 3D AutoCAD specialist

I work hard and like to be challenged. I like getting down to the details but I understand there is always a bigger picture so try to keep my mind open.

Australia, Qld, Bli Bli | Engineering & Manufacturing | Rating 0.0 (0 reviews)
parametric/architecture design engineering

Architecture student with a masters degree in electrical engineering with experience in a lot of CAD and design programs. 1. High quality services; 2. No language barrier; 3. Fast communication response time. We teamed up with licensed experts in: architecture, interior design, landscape design, product & industrial design, graphic design & illustrations and fashion design.

Romania, Transilvania, Baia Mare | Engineering & Manufacturing | Rating 4.9 (15 reviews)
Your TRUST Our SERVICE

I am a Graduate Civil Engineer having 7 years of practical experience in Delay Analysis, Claims, Computer Programming, Spreadsheets. I am well-versed with AutoCad, Civil 3d, Ms-Office, Primavera.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3D design, AutoCAD, Tekla, SolidWorks, Steel struc

I'm familiar with 3D design, workshop and erection documentation for huge and complex projects with weight over 600t.

Macedonia, Kumanovo, Kumanovo | Engineering & Manufacturing | Rating 5.0 (6 reviews)
Structural Service for Diverse Needs

Qualified Structural Engineer with extensive wood framed experience. Range of service varies from geotechnical to structural as well as field based duties. With over ten years of experience and intimate knowledge of today's building codes, I can make the planning/permitting process a smoother experience.

United States, CA, DIAMOND BAR | Engineering & Manufacturing | Rating 0.0 (0 reviews)
tool design,mold,fixture design,sheet metal design

IDE have well promoted firm in mechanical now we developed our wings in civil architecture,civil structural,electrical and electronics, data entry and web design IDE has Professional and well trained persons having a lot of software development and data processing experience. IDE has very good satisfied customer base at domestic and in various other Geographical locations including USA, UK,australia etc. Our repetitive orders from customers tells us about our quality services.

India, tamilnadu, coimbatore | Engineering & Manufacturing | Rating 4.2 (28 reviews)
Designer urban furnishing § architectural.Surveyor

I have an experience of 10 years as an architectural draftsman and buildings. Then I worked as a draftsman and infrastucture development urvbain collaborating on large projects such as the tram Marshals in Paris, connecting the A86 motorway, tram Velizy-Villacoublay, the high speed rail line in the Rhine-Rhone in companies such as Arcadis, Setec, Urban construction or Colas. I then went to the draftsman, surveyor and quantity surveyor in a construction company that dealt with urban renewal projects (sanitation and roads). Since February 2010, I am road and utilities infrastructure designer, construction and urban development in an engineering office in the Paris area.

France, france, les ulis | Engineering & Manufacturing | Rating 0.0 (0 reviews)
mechanical design calculation, structure design,

ENGINEER WITH 10 YEAR EXPERIANCE IN OIL & GAS

India, MAHARSHTRA, PUNE | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

My name is Dragan Niciforovic, I'm 35 years old and I live in Belgrade, Serbia. I am registered as a chartered engineer (Professional Engineer) in Serbia - (Licence of Responsible Designer Traffic and Traffic Signalization No. 370 J801 11) I have motivation and ambitious approach as young man who are prepared for lifelong learning, with the aim of better positioning in the market. The last six years I have gained knowledge in various areas of traffic and transportation engineering. I also worked on vary types of projects which cover traffic design and traffic analysis for highways, major roads, urban streets, parking lots. Also I gained experience in data collection, traffic analysis of black spots. Also, I worked on the urban planning projects, researches, studies, road safety projects, audits of technical documentation.

Serbia, Serbia, Belgrade | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process equipment design,Piping stress analysis

More than 22 yrs. of experience in process equipment design-mechanical (pressure vessels, Heat Exchangers,Columns,Storage tanks), Piping Layouts, Isometrics, Piping Stress analysis, Project coordination.

India, GUJARAT, VADODARA | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering Design Company

CAD Design | 3D Modeling | Drafting | Simulation |3D Designs Multi Design Solutions providing services of AutoCAD design, 3D Modeling, Drafting of new product development related with Architectural, Engineering , Construction and Telecom design. We are group of experts holding 17 years of corporate experience with Telecom, Civil and land developments. Now here to share experience with global stakeholders to get quality design in a very economical range. Leverage our robust design experience for your next job!

Pakistan, Capital, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Sr. Structural Engineer

Being an expert Designer with more than 8 years of experience to offer you. The most recent experience include, Design and Development of Mechanical fixing systems for stone cladding/ceilings (light weight 2cm thk to heavy shape stones (weighing > 2 tons). Responsibility-proposal of cost effective mechanical fixing systems with or without secondary framing for ease of execution & cost and negotiations with consultants for design approval. Supervision of construction of Wild Wadi water park @ Jumeirah, Dubai, UAE. Responsibilities-checking and approval of shop drawings, finish materials, mock-up etc, wind bracing, approach tower to the slide. With wafi engg & Mammut Building Systems, details of experience and work done is available in Detailed Resume. I would appreciate your keeping this inquiry confidential. I will await for your call (561464090) and to organize an interview at time suitable for both of us. Thank you for your consideration. Kind regards,

United Arab Emirates, Dubai, Dubai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional CAD Tech ready to deliver.

I am a professional CAD technician with 10+ years experience. I have excellent skills in Civil, Architectural, and Mechanical engineering fields. I am proficient in AutoCAD and Civil 3D. I have the time and dedication to complete your projects in a proficient and professional manor at the rate of a freelancer. My team and I can provide you all your drafting needs.

United States, FL, Middleburg | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert in steel and RCC designs

? Technically evaluated and certified several sites ? Designed and implemented more than 9000 Telecom Sites ? Analysis and Design of Steel Structures ? Analysis and Design of R.C.C Structures ? Quality assurance and Quality plan ? Analysis and Design of various types of Foundation designs of Telecom Towers ? Designed and implemented TL tower projects ? Successfully design, tested 220kv M/C TL tower at CPRI Bangalore Worked extensively for NOKIA SIEMENS NETWORKS, PGCIL, KEC, TATA PROJECT, IDEA CELLULAR Successfully consulted with following customers on site designs and Implemented more than 3000 sites IN OUTSIDE INDIA : Du - Dubai, Zain KSA and Iraq, Cell C RSA, Morroc Telecom in Morroco, Asia Cell Iraq, Qtel international MTN , STC, ASIACELL, WATANIA, KOREC TELECM, and MEDITEL, Mobily KSA.

India, ANDHRA PRADESH, SECUNDERABAD | Engineering & Manufacturing | Rating 0.0 (0 reviews)
QAE

I am Sergey Smaglyuk. I have over 5 year experience in civil engineering and 2 years in QAE. I specialize in AutoCAD, Lira, ArchiCAD, Revit Structure, aPriori. I meticulous follow to customers requirements and commit to complete work on time .

Ukraine, dnepropetrovsk, dnepropetrovsk | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Young structural engineer, currently graduating from the University of Illinois at Urbana-Champaign, top-rated program in the United States. Various skills, in the most used Structural Analysis softwares, with special emphasis on computational mechanics. I also have various "jolly" skills which come with the trade, such as the Office Suite, MATLAB etc. I am also very well versed in Italian which I have studied since a very early age. I consider Elance as a chance to apply my knowledge, but also as a challenge to enrich my knowledge. I am very disciplined and organized and I hope I will produce a satisfying output. Regards, Orest

United States, IL, Chicago | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Structural & Environmental Engineer

Experienced structural engineer with practical experience in construction and maintenance of steel/concrete structures, oil and gas storage tanks, industrial and residential buildings, conveyors and transfer towers and other infrastructure facilities. Environmental engineer with emphasis on risk assessment in water resource management.

Canada, Ontario, Ottawa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
very active

My name is El.Sayed salah. I am working as assistant lecturer in Menoufia University avey well known university in Egypt. I working also as Part time structural engineer in international offices here in Egypt such Dr.Shaker El.Behairy office and C.D.C office. I have done a lot of designs for many projects in Saudi Arabia. I designed many projects in Qatar and UAE, In addition to that I can visit Saudi Arabia at any time for any reason if you want. I think that you can trust and rely on me. You can find all my qualifications for your reqired jobs in my C.V. I waiting for your reply to start working with you. I am ready to prove my previous experience and work.

Egypt, MENOUFIA, QUESINA | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm an Engineer for a large Construction Company who works in Project Management. My degree is in Architectural Engineering. I am an extremely organized and detail oriented individual and am very capable of a wide variety of tasks.

United States, PA, Narberth | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Autocad Drafter

I am Ruchi from India completed my civil engineering in 2010 and have almost 3 year of experience in designing using autocad and staad pro software. I am looking for trustworthy companies who can give me outsourcing work related to any kind designing according to my skills to enhance my earning and utilized my free time. Thanks & Regards

India, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Hi, I Have an 8+ Years of Experience as Draftsman, & also as a Data Entry Operator.I can do my work work with sincerity, Can finish my given work within the alloted time or earlier and also with Error free.

India, Chennai, Porur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

To combine Engineering with Architecture in order to develop more efficient and sustainable buildings using BIM.

United States, IL, Chicago | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

More than 11 years experience in the construction field, working in different kinds of constrction projects such as: hospitals, banks, administrative buildings, housing projects and faculties, with strong knowldge about managment based on professional experince in mega projects and study of Project Management,experience of working in various work environments of the countries of the Middle East and Africa.

Saudi Arabia, Al Taif, Al Taif | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Hydraulic engineer with +12 years international experience in hydraulics, infrastructures, marine works, berthing systems, coastal engineering, hydrology and flood risk. Interested in Project Management, Infrastructures, EPC companies Oil&Gas.

Italy, Varese, Origgio | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm structural engineer with 4 years experience working with Autocad. I have experience on various programs for landscape planing, as I designed PV and Windparks. Also worked as draftsman of steel and wood structures. I'm good in finding different approaches to solving problems. I'll do my best on every task.

Bulgaria, Burgas, Burgas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD Civil, Structural, Architectural detailing

30 years global experience in Civil, Structural and Architectural detailing.

India, M, Navi Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

-experience:Scanning, georeferencing, digitizing maps, plotting, working with graphical and textual data base. Updating and improvement of digital topographical plans based on ortophoto, Urban GIS projects, Urban General Plans for cities, townships, Cadastral Projects (10 years) - Autocad, Microstation, Geomedia, Photoshop, Correldraw. etc, (10 years)

Romania, Muntenia, Targoviste | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Recent college grad with an eye for detail in Engineering field of Design. Attemping to get experience with working in real world AutoCAD environment. I'm knowledgable with AutoCAD, AutoDesk Inventor, Revit, 3dsMax, and CNC programing.

United States, GA, Warner Robins | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Ms. Heintz is a professional environmental engineer located in Baton Rouge Louisiana. Ms Heintz has supported various projects for both federal and industrial clients, including Title V Permitting, EMS support, compliance audits, air emissions inventories, spcc plans, hazardous waste management plans, and various facility compliance plans. Ms. Heintz has completed environmental auditor training, and Enviance System training, and has successfully completed ISO 14001 Lead Auditor Training. She is currently looking for project work on the side. She is experienced with MS Excel and Access and is able to quickly and efficiently enter data as needed.

United States, LA, prairieville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Digital & Web Communication Solutions Provider

Z-Aksys Solutions is a rapidly growing team of creative and technical professionals who thrive on developing effective communication tools. Z-Aksys specialises in delivering creative, innovative solutions across different media. We assist our clients in defining their communication strategy and help them implement it effectively. Z-Aksys takes a mixed-media approach to everything we do, so that our clients benefit from an integrated communications roll-out that is consistent in its content logic. Whether it's print or online, we'll make sure that there are opportunities to introduce and incorporate rich media – images, videos, 3D clips and animations – seamlessly. Starting in the digital domain, we deliver multi-channel solutions that combine user insight, technology and imagination. We also develop custom software applications that simplify and streamline data acquisition and storage.

India, Maharashtra, Navi Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Senior Electrical Engineer

A qualified and experienced electrical engineer with 12+ years of exceptional track record in design as well as installation of heavy-duty electrical networks and equipments. Seeking a senior engineer post with a well reputed engineering/construction organization to contribute to financial tangibles in terms of engineering expertise.

Turkey, istanbul, istanbul | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced in a variety of disciplines

-I have advised project engineers regarding construction material costs and quantity calculations. I have aided in the development of plans and specifications for land developement, municipal water and sewer, road, parking lot and drainage projects. I have collaborated with contractors and clients as the on-site representative for many large public and private projects. I have written detailed daily reports logging work progress for payment, quantities and quality assurance purposes. I have created post bid documents, bid tabulations and necessary addenda, prepared detailed public reports regarding bid proposals, legal exhibits and boundary and easement descriptions.

United States, MI, auburn | Engineering & Manufacturing | Rating 0.0 (0 reviews)
working with our hearts is working our dreams

I am a civil engineering graduate specialized in structural engineering with almost 3years of working experience. I have the expertise on autocad application as it is my current job in an international design company in the philippines namely LYON Associates, with its main office in hawaii and handling projects over the pacific. I am also experienced in project management and know how to handle manpower as being a project coordinator in my previous job on A.S Signs Inc, also an international signage company I am computer literate and can perform different applications like stàad, photoshop, corel draw, ms offices and others.

Philippines, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hydraulic Engineer - CFD Analysis - Experimental

CFD analysis - CFX ANSYS. Morphodynamic and Turbulence in River, strong laboratory analytical skills (experienced in use of LDV, acoustic velocimeters, bed level gauge PV09), DAQ - Labview, Good computing skill in Matlab; Tecplot and Surfer advanced user; GIS user and developer Crossflow turbine design. Specialties: Hydraulic Engineering, Morphodynamic in River, CFD - ANSYS, statistical analysis in Matlab; GIS user and developer

Italy, Iatly, Palermo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
modeling using revit arch ,sketchup pro,3d max

have exp in working interior design/engineering project using revit architecture, autocad, sketchup pro, 3ds max, ms office, preparation of BOQ, site detail drawings, co-ordination with site/contractor/MEPservices/client/vendors etc. can source material/information/vendors/contractors, collecting and comparing quotes for projects. my education is diploma in mechanical engineering, BCA/MCA Am ready to work with client for related projects at a very reasonable price.

India, karnataka, bengaluru | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

structural analysis and design of steel, conc and composite structures...

Nigeria, lagos, ikeja | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert AUTOCAD

AUTOCAD expert and interested in designing of mechanical components

India, tamil nadu, coimbatore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert CAD/CAM/CNC Designer

I graduated from Ha Noi University Of Technology, one a leading university in Viet Nam.And I major in Mechanical Engineering. My hobbies are designing, and using graphic software to draw product.After graduated 3 years, i have much experience in using Autocad, Solidworks, Catia or Inventor.

Vietnam, Viet Nam, Ha Noi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert AutoCad

I am qualified Mechanical Engineer with adequate University Degree, specialized in Mechatronics. Experience designer for steel constructions and all kind of AutoCAD related drawings. Also have good skills in designing 3D Models in SolidWorks and Tekla Structures

Macedonia, Gazi Baba, Skopje | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert heating instalations

53 years old, great experience in heating instalation, oil rafinating instalations calcul of pipes dimension,pumps and heating corps

United Kingdom, GLOUCESTERSHIRE, CHELTENHAM | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil Engineer

a civil engineer that is willing to work with you with the best of my knowledge and skills

Philippines, NCR, MAKATI CITY | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a Mechanical Engineer. I graduated from Georgia Tech and I have Mechanical design/ drafting experience.

United States, GA, Clarkston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert structural analyst

My responsability as project engineer is developing all type of calculations using ANSYS and STAAD PRO software mainly. Static and dynamic calculations, and also linear and non linear calculus.. Customizing ANSYS using APDL and TCL programming. Calculation of all types of great scale steel structures (tubular, lattice, singular,..), over 100 m hight in some cases, with great influence of turbulence and inelastic phenomena. Research and Development Center in Automotive (CIDAUT ), located in the Technology Park in Boecillo, taking part in several projects, many of them aimed at the simulation of dynamic high-strain phenomena using finite element codes within the simulation of impact department. Software used was PAM-CRASH/SAFE (CAE), I-DEAS (CAD/CAE), ANSYS (CAE), MADYMO (CAE

Spain, Segovia, Segovia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in Designing

Undergraduate student of Mechatronics Engineering -5th semester, College of Electrical and Mechanical Engineering, National University of Sciences and Technology (NUST), Peshawar Road, Rawalpindi

Pakistan, punjab, Rawalpindi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil Engineer

I have a very good educational background including fine scores in all major syllabuses also I have good communication skills in verbal and written, especially strong abilities to work with various team and he has certified in AUTOCAD 2006, structural STAAD PRO 2006,I have familiar knowledge in MS-Office 2007 and MS PROJECT-2007 & PRIMAVERA project management, I have utmost potentials to work in real-time environment, where I have the capability to give and use the full skill sets to organization, having equipped and expertise with various latest engineering tools and techniques, cost evaluation techniques and tools which he applied in project to produce cost-effective solutions to the organization. I can handle high pressure environments with ease and open mind and also a good team player and have an efficient communication skill to present his points precisely to listeners.

India, Tamilnadu, Chennai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert ACAD drawer

I'm a curios scientist who always like the complicated project s to apply my skills. Loving anything about calculations, programming, design, modelling; I think on my self as a problem solver. I can work under pressure, rush in time and I can manage high pressure levels according to my work as an engineer .

Colombia, Antioquia, MEDELLIN | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Telecom, PM, Coordinator,PMO, BMC

Telecommunications engineer with +6 years project management, ICT experience

United Arab Emirates, Bucharest, Bucharest | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCad 2D

geological engineer, AutoCad 2D drawing skills, experience in homes designing, if you start it - finish it

Romania, Maramures, Seini | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD und 3D design expert

Hello I am a Bosnian based degree qualified mechanical engineer with over 10 years experience in the use of Auto CAD 2d and 3d and also in the use of Proengineer. I have a big experience in plastic and metal part design and also in furniture and interior design. I speak English and German

Bosnia and Herzegovina, USK, Bihac | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am only here to get the job done and done right

We are a civil and construction based company in the Caribbean. We pride ourselves in our work ethics which include affordability of services while meeting or exceeding standards, quality and deadlines. Our willingness to firsty serve our clients surpasses the emphasis on money making, developing and promoting our good name is of paramount importance.

Trinidad And Tobago, null, Rio Claro | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

My name is Jimmy Abdul I trained as civil and structural engineering technician. I prepared structural engineering drawings both in concrete and steel for buildings either residentials commercial and public buildings.Also civil drawings for roads and bridges. I detail drawings with several softwares, AUTOCAD CIVIL3D and REVIT these I've been using overyears perfectly.

Nigeria, Lagos State, Lagos | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

A talented young professional and dedicated Civil Engineer with over 3 years experience designing of water & sewer pipeline networks and in storm water management. Manage well under intensive schedules and enjoys working hard with the team. Has a natural way of improving and maintaining good client relationships.

Australia, NSW, Sydney | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a construction technician and i work in my private company in Belgrade for 12 years. Before that, 11 years i worked in large companies whose business is to design and to built various facilities, Energoprojekt in Belgrade(Serbia). I am construction technician with experience in designing large buildings in the country and abroad. I work quickly and efficiently,client satisfaction and quality work are my top priorities. I am hardworking and a fast learner with good communication skills. I am interested to work and i send my CV.

Serbia, Serbia, Belgrade | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Veteran Manager with Experience acros many sectors

A mechanical engineer from India's topmost engineering institute (i.e. IIT Delhi) with wide and rich experience across engineering, maintenance, project management, start-ups, entrepreneurship, designing, sustainability, water treatment, waste to energy, cleantech. A resourceful person who can help you get your assignments completed at a much cheaper price while ensuring the best of quality. I work with academia, start-ups, local manpower and other firms in order to device the best solution for your problem.

India, Uttar Pradesh, Greater Noida (NCR) | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Project Engineer, carrying out structural analisys and calculations, using FEM tools as Nastran / Patran, ABAQUS, Hypermesh, Ansa. Experienced in aeronautics and civil structures, both composites and metallic. Structural analisys, Detailed and Global Finite Elements Models. Experience with technical documents, and EC directives. Good customer treat.

Ecuador, Loja, Loja | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Renewable Energy Expert

I have over 6 years experience in Renewable Energy and AutoCAD design. I am founded of my work and will do my best to finish each project with success . Having a happy customer makes me happy.

Romania, Ialomita, Slobozia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

• 2.8+ years experience in Civil Structure Design & Construction Works. • Honest, dedicated, hard working individual with good presentation and intercommunications skill. • Precise knowledge about engineering materials. • Precise knowledge about ACI Code, BNBC 2006, AISC. • Experience with relevant Civil Engg. Software (AutoCAD, Staad.Pro, ETABS ACECOMS GEAR). • Good presentation skill with learning mentality.

Bangladesh, Bangladesh, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Civil Engineering in water supply and sewage systems

Croatia (Hrvatska), Koprivnicko-Krizevacka, Koprivnica | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCad Expert

Hi, This is Ramkannan from Tamil Nadu; I am a Civil Engineering graduate and have an experience in the field of CAD designing. Previous to this design works I completed my Diploma and have an experience as an Assistant Engineer. I completed my design course in the famous CADD center. I am very transparent to my clients that will be my advantage also. I thought that mutual understanding between the client and worker is the tough work in any project. If the understanding is good, the project will be good. So that I will take some more time to understand the project and ensure my accuracy in each and every works. Projects done by me: 1.Using the waste material to increase the concrete strength. 2.Glass Fiber Reinforced Concrete Thanks for spend your golden time to read about me.

India, Tamil Nadu, Tirunelveli | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Architects & Planners

Value adding YOUR point of view governs our BASIS to render you intelligently customized, clutter-free & time bound services. CAD 2d 3d Digitizing/CAD/R to V conversion of sketches. Graphic & Multimedia, PS & PP presentations Co-ordinating services with structural & architectural design. Furniture/Product design Preparation of Masterplan Infrastructure Planning

India, null, kochin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical & Product Design Engineer

20 years of direct experience successfully fulfilling the duties of a Design Engineer in a heavy manufacturing and assembly facility. My experience includes Mechanical, Civil, Structural and Manufacturing Engineering. I also have extensive experience in welding, fabrication, machining and electrical controls.

United States, TN, Chattanooga | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineer and Excel Developer

Expertise in spreadsheet development, process automation and systems optimization. Specific experience in developing systems to track and automate tasks and data. Day job is estimator and software developer for construction information systems, integrating Microsoft Excel and Microsoft Access with estimating and project controls software. Graduated from Purdue University with a BS in Civil Engineering. Educational focuses were in Systems Design and Network Optimization. Obtained LEED AP BD+C, and EIT licenses. Plans to obtain Professional Engineer and Project Management Professional licenses. Special interest in construction technologies

United States, KS, Lenexa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

i'm acivil engineering working designeer but i'm can work data entery using excel , word ana i can drawing using autocad ana microstation programe

Egypt, cairo, cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a Structural and Civil Engineering master student that enjoys his field of study and more than that doing a good job. I am passionate, responsible and believe that the devil is in the details. That is why everything I do I do properly and with a well developed eye for detail.

Denmark, Aalborg, Aalborg Øst | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

As senior engineering student, I have significant experience, by passing many similar students, in Modeling and design using all softwares mentioned below. As a future engineer, I have tried to cover all the construction industry's sides, so beside the design side, my expertise include also shopdrawings and execution drawings, Bill of quantities, Cost estimation, cost control and planning. Always running the wheels of new knowledge, you can never say I know it all, specially in this business.

Lebanon, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD consultancy

I am a highly experienced senior CAD Technician and Draughtsman of eleven years. Quick and precise in my delivery, a reliable team player who works equally well on my own initiative. I excel when working to deadlines, putting in all of my efforts to achieve the best possible results. My extensive and wide ranging skills meant that I was brought in as a trouble shooter. I have been involved in various aspects of Civil Engineering projects, Transportation schemes from the Preliminary design to the As-Built status.

United Kingdom, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Telecommunications Engineer

Experienced Telecommunications Engineer is looking for new challenges and opportunities in Information and Communication Technology, Satellite Communications, VSAT, Radio-Frequency and Fiber Optic Engineering, Data Communications Network, Instrumentation, GPS, GNSS, EGNOS, Multilateration, ADSB, CNS (Communication, Navigation and Surveillance) Equipment¿

Burkina Faso, Houet, Bobo Dioulasso | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Architect, Interior designer

I have experience in Architecture design, Interior design, drafting and 2D&3D modeling, 3D rendering and 3D animation. I am experience in Autocad, 3d max-Vray, sketch up, adobe photoshop,autodesk revit, Lumion 3d, power point and Quantity surveying and estimating using manual Excel and word Microsoft application. Seeking a career where my skills could be further developed and demonstrated & joining a contractor that offers a challenging and interesting job opportunity.

Saudi Arabia, Riyadh, Riyadh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD Drafter

I am a Design Draftsman with 14 years experience in Architectural, Civil, Structural and Mechanical Engineering fields. I have an Associates Degree in Mechanical Computer Aided Design from Niagara County Community College. I have worked on projects such as school renovations, strip malls, industrial, housing facilities, hotels, site layouts, P&ID's, SWD's, roller coasters and much more.

United States, NY, Kenmore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I'm a expert in PIC programming & Circuits

I’m senior member in my company here. We are a group and several people will be involved in to a single job. Including Engineers, Technicians, designers, workers. We are doing so many projects locally and internationally and now Online.

Sri Lanka, warakapola, warakapola | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a civil engineerging, I studied the Road, Rail and Bridges at the Technical University in Bucharest, I have over 3 years experience in AutoCAD drawings, I worked at many project for roads, rails, bridges, but also I have work for modeling objects in 3d, and I am open at new changelanges.

Romania, Bucuresti, Bucharest | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD & Microstation 2D&3D Designer

I have been working as a 2D & 3D Designer for most of my career for many employers and companies worldwide. I have completed many large scale projects in the areas of 3D-Design, 3D Modelling and AutoCAD,Microstation,PDS,Smartplant 3D for many employers and companies. I have also worked as a Power Engineering,Chemieingenieurwesen,Water treatment Technologist and Design Freelancer throughout my career. I would be happy if I am hired by you as I can prove my skill and deliver high quality work for you.

Germany, Niedersachschen, Wolfsburg | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical/Piping Industrial Engineering Design

Over 23 years of experience in various disciplines , including Mechanical/piping industrial plant design, Architectural and Materials handling. Versatile, professional, reliable and dedicated to providing customer satisfaction through quality and precise work.

Australia, Western Australia, Perth | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I?m a talented animated individual who is eagerly awaiting the opportunity to start a professional career as an engineer. I?m passionate for the civil engineering profession and I?m ready to take on real world challenges and apply my classroom experiences to these situations. My previous work experience, and education, combined with my active pursuit of the FE certification, and AutoCAD certification makes me an ideal match for any company.

United States, NY, Brooklyn | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional CAD Designer-Modeler, 2d/3d Viz.

- My name is Loukianos Damorakis, I'm an ENGINEER specialized in RENOVATION & RESTORATION OF BUILDINGS and a professional CAD drafter/designer with 9 years of working experience. Although most of the times I work with architectural projects (2d/3d constructional drawings and photo-realistic visualizations), my passion for 3D creations has expand my working field also to product and object visualizations. I work almost exclusively via internet with clients from all over the world and I fully understand the demands of this kind of cooperation. I love to undertake difficult and demanding projects and I am very meticulous and persistent in my work to always offer high quality services. The software that I use is: AutoCAD (2d/3d), ArchiCAD (2d/3d), 3DSMax+Vray, ZBrush, UVLayout and Photoshop CS. For more information about my work and skills please visit my website www.siade.gr .

Greece, Aitoloakarnania, Nafpaktos | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD/3d Modelling/Patent Drawings/Architecture/

We are a team of Engineer and Architect with many years experience. Our key specialization is on: Civil engineering works; Architectural works mainly building designs and interior decoration; Prototype, technical drawings, presentation drawings, 3d modeling and photo realistic renderings Building materials mainly stainless steel balustrade, handrail and glass constructions; Patent Drawings, Patent search and Patent applications; Geo cartography and GIS analysis; Research works related to the field of civil engineering and architecture. We are advanced users of following software: Autodesk AutoCAD, Autodesk civil 3D Solidworks, Inventor, 3ds Max, Photoshop, Illustrator, InDesign, ESRI ArcGIS

Germany, nrw, koeln | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Retired Structural Engineer

I am a retired Structural Engineer very proficient in AutoCAD. I work from my home in North Carolina and have considerable computer and software capability as well as Microsoft Office Tools.

United States, null, Pinehurst | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have a B.Eng in Civil Engineering am a resourceful graduate civil engineer who is vastly experienced in engineering design from the initial conceptual stage, through feasibility study and to detailed design. Physically fit and able to work on-site and at remote locations, Orezi is more than willing to undertake any work of a technical nature that falls within his ability and competence. He has a knowledge of health, safety and environmental focus when working on projects, and is committed to his personal and professional development. Right now he is looking for a suitable position with a forward thinking company

Nigeria, bayelsa, yenagoa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a qualified Civil Engineer who is currently specializing in building works, i have been working in this field for the last three years hence i have a wide understanding of the operations involved in the construction industry. I work with minimum supervision if any, and i am also very strict when it come to maintaining high quality standards of work at the lowest possible cost as is necessary.

Kenya, Central, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Safe Outsourcing from the Philippines Done Right!

Why Choose Redfords? Simple all staff work from a secure delivery centre, in the heart of Manila, CBD, Philippines. Redfords is an Australian company that has its entire operations in Manila, Philippines. We have been outsourcing for a few years now and now offering our services on Elance. Our Advantages: * Supervised Office based staff * Cost Effective compared in most cases less than freelancers * Secure Data Connection * Reliable Internet Connection * Secure Physical Office * Available for Short or Long Term Projects * Expertise in many disciplines * Our staff have a local phone line available with any Australian State Local Number - as a option.

Australia, Manila, Philippines, Ortigas City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AuotCAD Drawings from 1985, Mantels to Steeples

I have a Well-rounded professional experienced in a wide spectrum of construction/design and high tech components i.e. hardware, software, programming and CAD design. Responsibilities have been in Quality Assurance, Product Support/Technical Support, Developer Support, Beta Programs, and construction design / builder and contractor. Particular Expertise: ? Helped organize and implement a 20,000 site AutoCAD Beta Program ? AutoCAD training from r2.5 through 2012 ? AEC Architectural ? Programming Languages - AutoLISP, Visual Basic /VBA, C++, SQL, HTML ? Microsoft Office Suite (Word, Excel, Access, PowerPoint), plus many others ? Databases ? Networking ? Supervised, designed, and managed all types of construction sites from * small FHA homes to Hotels. The video from Unlimited Designs shows the steeples that I created the shop drawings for.

United States, null, null | Engineering & Manufacturing | Rating 4.3 (4 reviews)
Mechanical Engineer

Aerospace/Mechanical Engineer with over 15 years of experience in the design and development of flight worthy hardware. Proficient in Unigraphics NX, CATIA V5, and SolidWorks. Expert in aerospace standards for hardware. Obtained a Masters Degree at UCLA in Structural Mechanics, with focus on Finite Element Analyses. Over 15 years of using various Finite Element Tools, such as MSC PATRAN/NASTRAN, ANSYS Workbench 15, and COSMOSWorks. I have worked on designs from concept to design to testing and finally to production. Have worked with many suppliers to oversee production of hardware.

United States, null, null | Engineering & Manufacturing | Rating 4.7 (1 reviews)
Freelancer

CAD Specialist

Barbados, CA, Santee | Engineering & Manufacturing | Rating 4.2 (11 reviews)
Drawing and design

- Drawing of plans of installation - Development of plans of formwork and steel reinforcement - Estimate of time, costs and quantities of materials - Modeling 3D - Inspection of work to the building site and drafting of the reports - Knowledge of standards MTQ - Good knowledge of software Autocad 2D and 3D - Good knowledge of Civil software 3D - Good aptitudes of communication and capacity to be worked in team - Speed of execution and rigour - Good knowledge of Excel, Word and Access

Canada, Québec, Montréal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Highly Skilled AutoCAD,3DMAX,3D Modeler,Draftsman

In case of outsourcing to provide Autocad 2D & 3D,3DMax, VRAY, REvit,SketchupPo,Archicad,Sketchup,Adobe Photoshop, Corel, Illustrator, 3DMax, VRAY, REvit Modeling outsourcing....whatever your Autocad 2D & 3D,Archicad,Sketchup,Adobe Photoshop, Corel, Illustrator, 3DMax, VRAY, REvit Modeling outsourcing needs are, I would like to be the guy that gets your work... As I am highly Experienced as well Skilled AutoCAD Draftsman,3dModelMaker...All you have to do just relax & get the job done by me with full satisfaction...Bye

Bangladesh, dhaka, dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Turning ideas and dreams into reality

Mr. Bey is a refined and consummate design professional with a wealth of experience in architecture, engineering and construction technology. He is an expert CAD user with over 22 years of experience on a variety of project types. He is a driven professional with a passion for functional design in architecture and a commitment to client satisfaction and quality design and consultant services. Project Types: Residential Commercial Hospitality Institutional Civil Site Development Governmental

United States, NY, Albany | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Structural Draughtsman

I am Structural Draughtsman with 11+ years of excellent track record in structural department for Residential, Offices, Factory, University, Malls, Hospital, and commercial projects, Taking care of Structural Details & Standards Design, seeking a challenging position in a growth driven organization that provides ample opportunities to demonstrate competency.

United Arab Emirates, Abu Dhabi, Abu Dhabi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

A senior Civil Engineer have the experience of working at Mega Projects.

Bangladesh, Bangladesh, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am good in Cadd Drafting

I am a Cadd Draftsman ,I have six years of experience in Architecture and Civil Drafting. I worked in residential buildings, factories, commercial buildings, Working drawing, schematic drawings and Infrastructure Projects . Now i am working in metro rail Project .I provide freelance Architecture and Engineering CAD services to businesses and individuals, I can give your works quick and perfect.

India, Tamilnadu, Chennai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
autocad,cad,rhino3d,solidwork,spaceclaim

I am a designer.Structural and Naval engineering.Also Architectural designing or any draft work.working with Auto-cad/Rhinoceros3D/Solid-works/Spaceclaim and also Coral-draw,I will create your sketch or hand made design to above format.I have 5 years of experience as a designer and can assure you timely and quality work.I can supply all industry standard files (cad or cam)direct from above format for your needs.

Sri Lanka, Southern, Weligama | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reliable professional

I am a practising Civil Engineer who works on sub-contract basis. I am very keen to look for more works (engineering/ NON-engineering) to fill up my free hours during weekdays/weekend.

Australia, WA, Perth | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Project Management Consultancy

Civil Engineer with Project Management experience aspiring to open a company or consultancy to manage projects

India, Andhrapradesh, Hyderabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD 2D,3D / RCAD 2D,3D

We are a company specialised in design engineering and arhitectural, 2D and 3D modeling and detaling. We work with Autocad, Arhitectural Desktop, Rcad Concrete, Rcad Steal (Autocad Structural Detailing), Sketckup, Axis, Robot Millenium, Photoshop, 3D Studio Max.

Romania, Romania, Botosani | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Self-motivated Individual

I am writing in reference to the contractual position within your company. I am confident that I have the ability to excel on this project. I am a very diligent worker with strong attention to detail. As a successful Engineering Technology student I was required to be organized, self-motivated, and responsible. I graduated from the Phoenix College, with an Associates of Applied Science in Civil Engineering Technology. In my past position as a Civil Drafter at Aulerich and Associates, I was able to hone these technical drafting skills in the office, in the field, and at construction sites. In the office I was able to draft ALTA, Topographic, Results of Survey, and As-built surveys. In the field I was part of a Surveying crew that established boundaries, staked construction sites, and As-built the Finish Floor Elevation of the Gilbert Mormon Temple-where I also gained knowledge of valuable construction practices.

United States, AZ, Phoenix | Engineering & Manufacturing | Rating 0.0 (0 reviews)