Freelancers

Freelancers by Skills

1-100 of 6257 Professionals
Freelancers
Electrical Engineer, Electrical Estimator

7 years experience in Designing electrical works Governmental / Residential buildings, Public utilities or Streets Expert in: ? Designing the electrical distribution systems installations, sizing electrical equipment (cables, panels, lugs..) according to any demanded code (IEC, BS, NEC..). ? Lighting calculations buildings/ infrastructure using DIALux/ DIALux evo. ? HV/ MV/ LV (Power Panels, Switchboards, RMU, Transformers). ? Load calculations sheets. ? Preparing Bill of Quantities estimations and takeoffs: MS.Excel /Planswift. ? Preparing tender documentation. ? Designing and reviewing the electrical 2D layouts: 1- Lighting. 2- Power sockets/ Receptacles. 3- HVAC designing. 4- Light current systems (Telephone, internet, CATV, Racks..) 5- Grounding systems and Surge arrestors layouts. 6- CCTV and security systems. 7- Fire Alarm systems/ Fire fitting alarm systems. 8- Routing the cables, conduits, Cable Trays, Bus duct

Palestine, Gaza Strip, Gaza | Engineering & Manufacturing | Rating 4.6 (1 reviews)
An Academician and Researcher,expert in MATLAB

I am Dr. Abdul Kareem, a native of Kerala state of India. I hold B.Tech in Electrical and Electronics Engineering, M.Tech in Electronics and Communication Engineering and Ph.D in Electronics and Communication Engineering. I have more than 11 years of teaching experience in EEE and E&C departments and 5 years of research experience. I have published research papers in many reputed journals and conferences and served as a resource person in many national level Faculty development programmes and student motivation programmes. I have the experience of heading the student Research and project acticvities and many student groups have achieved national and international level recognitions under my guidance and three of them are applied for patents. I have fruitful administrative experience heading various departments.

India, Kerala, Kasaragod | Engineering & Manufacturing | Rating 4.5 (11 reviews)
Engineering and Writing Solutions Provider

Professional Electrical Engineer and a Writer having multi-dimensional interests and expertise. As an engineer, Pro-efficient in Power systems solution design and studies using ETAP, electronic circuits + PCB design, Simulations and Programming on MATLAB, CAD Drafting, Project scheduling etc. As a writer, I am experienced in producing 100% PLAGIARISM FREE SEO Optimized Writings (Academic and Non-Academic), Technical Writings, Copy-typing, Proofreading, Paraphrasing, Business writings and presentations. My quality is drafting a document in simple and easy to understand language which is the core requirement of business and academic communication. I use pictorial representations, charts and graphs to portray facts and figures which enables reader to the grip the textual contents easily . Creative, client centric and focused. Rendering skills to the best matching client's needs with continuous support achieving highest level of satisfaction and extended working relationship

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 4.9 (21 reviews)
MS Electrical and Computer Engineering USA UTK.edu

Electrical and Computer Engineering

Peru, Lima, Lima | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

I have a combination of a great education and real world experience in the field of electrical engineering. I have experience ranging from electric drives to low voltage security systems. I like to work on several projects at once and stay busy sharping old skills and learning new ones. I always give 110% to my projects and consider myself a bit of a perfectionist in everything I do. One of the most important things I have learned since being out of school is although eduction is important experience goes a long way. Also if you would like to get to know me in order to feel more comfortable about awarding projects I would be happy to discuss things over skype.

United States, KY, Pippa Passes | Engineering & Manufacturing | Rating 5.0 (3 reviews)
Electrical / Electronics / Automation Engineer

Electrical Engineering. Electrical Design .Hardware Design. PLC and HMI programming. Electronics. PCB design. Arduino. Microcontroller Programming. VFD wiring and configuration. Technical writing. Simulation.

Tunisia, Tunis, Tunis | Engineering & Manufacturing | Rating 4.7 (3 reviews)
25 Years of Electronic Engineering Experience

Hello and thanks for reviewing my profile.If you are looking for seasoned, experienced, professional electronic design, look no further. I have over 25 years experience as a professional engineer and am proficient in both analog and digital design, board layout, prototyping and production. Specifically I have experience with and am proficient in hardware and firmware design for amplifiers, analog and digital filters, 8, 16 and 32 bit controllers, ARM and embedded applications, DSP, data acquisition, PID control, motor drives, audio and video applications, USB, Bluetooth, WiFi. I am also proficient in VB.net, C and Java and have experience making commercial PC applications many of which are designed for controlling the accompanying hardware devices.

United States, TX, Houston | Engineering & Manufacturing | Rating 4.8 (6 reviews)
Electrical engineer looking for jobs

Electrical engineer expert in circuits designing, power distribution systems and 2D/3D cad drawing. Bill of quantities, webdisegner and good english italian translator.

Italy, Tuscany, Pistoia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
SolidWorks,Machine Design,Mechanical Engineer,

Europeanin top ten Mechanical Engineer with over 8 years of experience working on most demanding projects on the international market. I have excellent knowledge and skills in SolidWorks, Autodesk Inventor, Product design, Machine design, Mold design, Sheet metal design, Weldment design, Manufacturing drawings, 3D modeling, Realistic Rendering, FEA analysis, 3D watch desing. I am interested for cooperation in the field of mechanical engineering, 3D modeling, 3D realistic rendering, FEA analysis and CAD. My creativity, skils and knowledge you can see in portfolio. You will see a lot various projects from many areas. Excellent feedback speaks about our expertise, skills, knowledge and quality! WHOLE PORTFOLIO!!! https://www.behance.net/shipovac2788 - Mechanical Design - 3D modeling - Manufacturing drawings - Machine design - Sheet metal design - Weldment design - Mold design - Product Design - Electrical device

Serbia, null, loznica | Engineering & Manufacturing | Rating 5.0 (33 reviews)
Professional Electrical Engineer

Electrical Engineer with a Masters Degree in Power Engineering. I work as an Project Application Engineer for CAT and I am relied upon to prepare technical documentation and attractive proposals for multimillion dollar projects. In addition to my profession, I am skilled in writing reports, articles, academic contents and resume. I am looking forward to new challenges and interesting job, to polish my inherent skills, while learning new ones. I take an aggressive approach towards task completion and deliver best results in minimum possible time!

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 5.0 (4 reviews)
MEP Engineer, Lighting Designer - Data Entry

MEP Design Engineer with sundry experience in building services. Delivering precise and accurate designs and shop drawings of Lighting System Layout, Power System Layout, Communication system Layout and Fire Alarm Layout. Lighting Design for both interior and facade treatment lighting and Lux calculation in Dialux. Well versed and proficient in: ? AutoCAD 2D & 3D, AutoCAD Electrical, Revit MEP. ? Autodesk Inventor (Modeling & Design Analysis). ? Dialux, AGI32. ? ETAP, MATLAB (SimPower, Simulink, Control Toolbox, Signal Processing). ? Circuit Simulation and PCB Design (Proteus, Circuit Wizard, PSIM,PSPICE). ? MS-Office Applications. Aside from technical skills, I can also provide administrative support as I am proficient with Microsoft Office applications which I acquired through years of doing calculations, research and reports. It is my ultimate goal to provide my service with quality, commitment and with the right attitude.

Pakistan, NWFP Peshawar, Peshawar City (N.P.O.) | Engineering & Manufacturing | Rating 4.9 (2 reviews)
Expert Electrical and automation engineer

I am a talented Electrical and Automation Engineer with years of experience and educational training. I am willing to work as a team member and also autonomously for your project. I have also worked for many years of my career as an Electrical and Automation Engineer. If hired by you I will deliver my best work at a high standard. I look forward to being hired by you for your jobs.

Lebanon, null, null | Engineering & Manufacturing | Rating 5.0 (8 reviews)
Chemical Engineer, PhD

PhD in Chemical Engineering Fourteen years experience as an Academic Researcher and as a Chemical Engineer for the private sector. Experience and expertise in chemistry, chemical engineering, detailed literature/ bibliography reviews, thermodynamics, polymers, scientific Research, product formulation, innovation support and scientific papers writing, chemical and physical processes. Scientific collaborator and lecturer for London Training for Excellence, UK for Polymers, HyperChem, Matlab and other subjects. Post Doctoral researcher. Main expertise includes Research, FORTRAN, VBASIC, HYPERCHEM, MATLAB, SPARTAN, Chemical Engineering, Thermodynamics, Chemistry. Experience with Molecular Dynamics, GCMC, DFT, Ab Initio, Formulations. Thirteen years' experience in quality systems [ISO9001, ISO14001, ISO22000, OHSAS18001], Occupational Health and Safety, Production Management, MSDS, Energy Efficiency for the building sector, Technical studies, Chemical studie

Greece, Central Macedonia, Katerini | Engineering & Manufacturing | Rating 4.6 (14 reviews)
MS Electronic Engineering, USA www.UTK.edu

Laser Range Finder desing, experienced, talented and skilled on microcontroller based products design, PCB board design, layout, schematics, firmware, c language programming. Also Xilinx and Altera FPGA programming. Labview programming.

United States, TN, Tullahoma | Engineering & Manufacturing | Rating 4.9 (6 reviews)
Embedded Hardware/Software Engineer

I am a full-time embedded systems software engineer with 11 years of experience. I have designed 20+ projects from inital conception to final production. I have designed hardware and software for PIC, AVR, MSP430, ARM, and TMS processors. I am proficient in C, C++, C#, Visual Basic, Pascal, Assembly, LabVIEW, and MatLab. I have also designed multiple PCBs using KiCAD, Multisim, Ultiboard, and Protel.

United States, TX, Fulshear | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Electrical Engineering Design

I have senior experience bringing electronics from concept through production. Small independent Electrical Engineering Design and Build firm for discrete electronics and/or control systems. I insure a great deal of pride with work provided and stand by the successful result until an agreed upon successful project end.

United States, NY, Oneida | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Making your idea a reality(Product Manufacturer)

Over 15+Years of Experience in PCB Design in various Domains Like Power Supply, Consumer Electronics, Telecom, RF Boards. Working on High Speed Designs, Impedance Matching, Delay Tuning, Differential Routing, Hands on Experience in Xilinix(Saturn, Vertex), Altera(Cyclone) FPGA, DDR2, DDR3 PCB Designs. I am providing PCB Design Services. Including schematic capture, BOM generation, PCB layout if need board procurement, Please see below, Iam supporting following PCB design tools. ? Mentor Graphics PADS (9, 9.5) ? Altium Designer (10 and 2014) ? Cadence Allegro 16.5 ? Mentor Expedition PCB (EE2007) ? Or-Cad Layout Plus (15.7) ? Eagle (6.5) ? Pro-tel SE99 Also Other services Like Reverse Engineering PCB's(2-32 Layer PCB's), Obsolescence management, BOM Activities, Component Selection of Various Electronic Component Assemblies.

Pakistan, Islamabad, Islamabad | Engineering & Manufacturing | Rating 5.0 (13 reviews)
Senior MEP engineer -HVAC, plumbing, electric

Experienced building services engineer, over 15 years in designing HVAC, plumbing and electrical systems for residential, commercial and industrial buildings. I'll be available on email, chat or mobile.

Romania, Romania, Bucuresti | Engineering & Manufacturing | Rating 4.0 (4 reviews)
Professional Electrical Engineer

Registered & Licensed Professional Electrical Engineer with 17 years of extensive experience in carrying out the maintenance, electrical design, project planning, trouble-shooting, electrical development and installation of electrical components and systems. AWARDS Recognized as Employee of the year 2009 of Busco Sugar Milling Co., INC. SOCIAL AFFILIATION/ORGANIZATIONS: President: Opalworks IT BPO Solutions & Electrical Engineering Services Auditor : Institute of Integrated Electrical Engineers (IIEE) ( Bukidnon Chapter ) Member : Safety Organizations of the Philippines (SOPI) Member : Knight of Columbus ( K of C ) Community : Active Purok Leader

Philippines, Bukidnon, Quezon | Engineering & Manufacturing | Rating 0.0 (0 reviews)
MEP Consultant

I am BSc in Mechanical Engineering. Having 15 years working Experience in HVAC System, Plumbing System, Fire Protection System, Electrical Design, Refrigeration System & Utility Service system. Also have sufficient experience in AutoCAD drawing. I have Completed extensive training on air-conditioning system design, air-conditioning equipment [specially on air-handing unit, dehumidifier, heat recovery unit, air and gas purification system] organized by Bry-Air (Asia) Pvt. Ltd., at New Delhi, India. I have completed all types of projects like Hospital, Pharmaceuticals, Commercial Building, Kitchen Ventilation, Shopping Mall, Hotels, Textile Mills, Industry etc quite successfully and confidently. I am quite sincere to deliver your job in time and giving you the assurance about the best quality too.

Bangladesh, null, Dhaka | Engineering & Manufacturing | Rating 4.9 (5 reviews)
Licensed PE, Embedded Systems and RF Design

I'm a licensed Professional Engineer, and owner of Garman Engineering, LLC. My group of electronics and mechanical engineers has extensive experience designing embedded systems for industrial, consumer, and military clients. We routinely develop custom hardware designs, and then create efficient firmware, which often requires many tradeoffs to reduce the cost and size of the final product. We can take your product from concept, through development, and into production, including offshore manufacturing, and retail packaging. Our engineers have a successful track record of designing systems to achieve MIL-STD and FCC certifications.

United States, WV, Morgantown | Engineering & Manufacturing | Rating 4.4 (3 reviews)
Electrical Eng. and Lighting Designer, CAD Drafter

An enthusiastic, hard working, highly motivated and self-disciplined electrical engineer and lighting designer with more than 7 years of experience. I am ready to assist you with your electrical engineering and drafting needs and offer you: - Electrical design services; - Lighting design services; - Light planning; - Lighting calculations; - Photo-realistic 3D visualizations, animations and walkthroughs; - Preparing detailed lighting specification documents; - Preparing technical drawings and plans; - Preparing complete, manually redrafted, multilayered and dimensionally accurate AutoCAD files from prints, scans and PDF files. I would be glad to share my experience, ideas and professionalism.

United Kingdom, Northamptonshire, Kettering | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical engineer

In the past 7 years I worked on dozens of various projects which are related in the design of electric motor drives and installations in buildings. My responsibility is making the overall project, technical information finding the problem and solve it.I am also familiar with programming in Visual Basic. My experience is related to designing, electrical drives, fire alarms, evacuation light, relay protection, wiring anti fire systems etc.

Serbia, Serbia, Nis | Engineering & Manufacturing | Rating 5.0 (2 reviews)
Expert Engineers and Manufacturer

We are team of experienced engineers of all the fields. We will provide you the work on time in budget and with quality.. Once you hire us this is guarantee after seeing the quality of work you will definitely hire us for future projects.

Pakistan, Punjab, Rawalpindi | Engineering & Manufacturing | Rating 4.9 (7 reviews)
Process, Controls, Automation, Electrical Engineer

I have over 29 years of Process Control, Robotics, Controls & Automation and Safety experience in the automotive, petro-chemical, water treatment, food & beverage, mining, steel, postal service, HVAC industry, etc. I have worked on and managed large projects from $1 - $10 Million in Canada, the US, Mexico and the Middle East. I have extensive experience in electrical engineering, project management, process control & controls design, PLC & SCADA programming, safety, integration, troubleshooting, start-up & training. Areas include: automated assembly, dust collection & HVAC systems, injection molding, metalizing, material handling, automated gluing, automated welding, automated painting, chemical mixing systems, DAF clarifiers, separators, dust collection systems, process control, instrumentation, energy management, blow molding, gluing, food processing, cutting, extrusion, welding, melting, drilling, packaging, palletizing, smelting, stamping, steel rolling & inventory control.

Canada, Ontario, Fenelon Falls | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional electrical engineer

A professional electrical engineer. I'm hardworker, prompt and result oriented. I have a strong background in design and shop drawings and AutoCAD and MS office , I can understand your needs and deliver the results within deadlines.

Egypt, null, Cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional Electrical Engineer

Registered Professional Electrical Engineer with a broad range of experience in both electrical power systems and control and automation systems. Specializing in power system studies, analysis, design, protective relaying, process control and automation including SCADA and control systems, and computer aided drafting (CAD). Experience in power distibution and generation in commerical, industrial, municipal, utility, and nuclear applications. Registered professional engineer in the State of Minnesota, USA. Other areas of interest include new technologies, electrical safety and training, energy audits, project and construction management, smart gird, and alternative energy.

United States, MN, Zumbrota | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer, Design & Analysis

Electrical Engineering services with 8 years experience in electrical design, analysis, control & power distribution, construction for multidisciplinary contractors in educational, healthcare, industrial and renewable energy projects.

United States, MA, Woburn | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Power Engineer

I have around 6 years of experience as an Electrical Engineer. I have a good experience in writing/reviewing Quality Control Procedures (QCP's) and Inspection and Test Plans (ITP's) and applying them. I have an experience of performing Factory and Site Acceptance Tests (FAT's & SAT's). I am willing of working as a freelancer in the field of Electrical Engineering, Project management, Translation (German-English-Arabic)

Jordan, Amman, Amman | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineering, Design and CAD

Experience in all aspects of Mechanical Design: Ideas, Concepts, Detailed Design, Engineering and Innovations

United States, PA, Southampton | Engineering & Manufacturing | Rating 4.8 (30 reviews)
Electrical Engineer

Experienced in Assembly, C, C++, C#. PIC, AVR, ATMEL, MSP430, OMAP, LPC. High speed memory (NAND, SPI FLASH). RF (TX/RX). Embedded design.

United States, UT, Santaquin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics for embedded / industrial applications

TMSI Technologies Inc is young R & D company working on the market more than 3 years. We are involved into the development of electronic devices for embedded and industrial applications. Our skilled engineers have 10+ years experience in: IT consulting and business analyses Embedded and industrial electronics from design to mass production: - high-speed SoC and SoM. - single-board computers - video streaming - high-speed transport - modern displays' technologies - Industrial control and communications - safety, electromagnetic emission and surge/lightning protection Robotics control software development.(C#, C++) Our features are: - short development time for Starter-kits and Evaluation Module; - experience in development for industrial and outdoor applications with strong requirements to IP-rate and vibration; - development with high-level requirements to safety, EME and lightning protection (aircraft application).

Canada, qc, st Laurent | Engineering & Manufacturing | Rating 4.7 (4 reviews)
null

Electrical Engineer with 25+ years experience in motion control, embedded computing, and electro-optics design. Holder of three US patents. 30+ CPLD designs. Designed dozens of PCBs from concept to production. Designed system architectures for several systems. Wrote software for embedded controllers on several platforms (PC104, 68000, 8085, 6805). Supported designs from concept through production and regulatory approvals. Implemented processes to improve PCB manufacturing yields. Supported service engineers on technical issues. Managed projects and supervised technicians and other engineers in their execution.

United States, NJ, Lambertville | Engineering & Manufacturing | Rating 4.7 (12 reviews)
Ph.D. in Mechanical and Electrical Engineering

Ph.D. degree (Mechanical and Electrical Engineering). Inventor of the fundamentally new concept of floating wind turbines. Interdisciplinary knowledge and experience: mechanics, hydraulics, machining techniques, robotics, electronics, control theory, CAD/CAM/CAE/CFD, computing. Author and co-author of about 100 research publications and tutorials. Author and co-author of 30 patents in robotics, machine tools, and renewable energy (wind turbines and water turbines). Principal investigator of research projects (both International and Russian).

Russia, Primorskiy, Vladivostok | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Electrical Engineer / Web Designer & Developer

A License Electrical Engineer working in Construction Industry locally and abroad. Works with AutoCAD. With engineering skills, I use it as an advantage to learn Web Designs and Development.

Philippines, Cebu, Cebu | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer, Embedded Design

Electrical Engineer with 15 years experience, specializing in embedded PIC/ARM microcontroller design. I take your idea and transform it into a functioning circuit, delivering design files, prototype PCBs, and detailed BOM. I also hold an MBA, so my designs are always business-minded, selecting components that will adequately accomplish the task for the lowest cost. Experienced in circuit prototyping, PCB layout, fine pitch SMD soldering, LED lighting, RF devices, test fixture design, automotive applications. Give me an idea, and my prototype will exceed your specifications. Located in NM, USA

United States, NM, Alamogordo | Engineering & Manufacturing | Rating 5.0 (11 reviews)
electrical engineer

An Electrical Engineer with MASTERS degree in ELECTRICAL ENGINEERING, ADDC/TRANSCO/ADWEA approved COMMISSIONING ENGINEER holding ADDC CP (Competent Person) LICENSE, with over 10 years professional work experience with reputed Engineering Construction, Oil and Gas firms, International Consultancy Organizations in the field of MEP Construction

Pakistan, sialkot, sialkot | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional Electrical Engineer

Licensed Professional Electrical Engineer with over 8 years experience in the MEP consulting industry specializing in electrical and fire alarm design. Excel at the following: Short circuit/arc flash studies Designing/specifying electrical systems Low/medium voltage power systems Lighting systems Fire alarm systems Load calculations AutoCAD drafting Revit MEP -Will effectively communicate with client if there are questions or discrepancies to ensure the job is done right the first time. -Self starter who enjoys getting into different projects and learning as much as possible. -Start to finish quality control of all my projects, big or small, no matter the client. -Successfully complete mark-up to AutoCAD conversions first time around. No back and forth required. .

United States, NY, West Babylon | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical Engineer cum Project Manager

I am a graduate electrical engineer with 20years of professional experiences at various corner of engineering & technology. My professional position sequence are as follows: Electrical Adviser , Plant Manager , Senior Electrical Engineer , Electrical Engineer . During my journey of 20years profession I have gathered experiences on the following : Technical Management , Technical writing ,Electrical Design , Electrical drawing , Mechanical engineering , Mechanical design , Project Management ,Customer Management. Skill : Electrical Engineering , Automation & Control , Instrumentation , Project management , PLC & DCS ,AutoCAD , MS-Word , MS-Excel , MS-Project , Technical Writing , Business Analyst , MATLAB , Electrical design , Electrical Drawing , SixSigma.

Bangladesh, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Senior Design Engineer

I am professional Electrical Engineer having 7 years of experience and also have more cutting edge proportional capabilities. provide services related to > PCB Designing Single/Multi layers (in Altium Designer 10) > PCB and footprint design in 3D > Embedded system development > PLC and SCADA, HMI > Prototype Development > FPGA > ALTIUM Designer > MATLAB Simulink > USB Interfacing > Li ion battey/ Lead acid battery Chargers Design > Solar Tracking system > GSM > Verilog/VHDL > Robotics > Bluetooth > LCD Display Circuits > CCTV cameras > WIFI > Home Automation > GPSsss > VLSI > RF module > Flash > Firmware development in handhelds devices and making IOS > Android system integration > Mathematics Softwares and Programming Lnaguages > Assembly Language > Mentorgraphics PADS 9.4 > MULTISIM > Eagle 6.5 > Proteous 7.10 > Gerber Viewer > PIC 16,18,24,32,AVR,8051 > Arduino Sketch

Pakistan, Punjab, Rawalpindi | Engineering & Manufacturing | Rating 3.9 (18 reviews)
Electrical and Software Engineering Services

Hi! My name is Jason and I'm an innovative electrical engineer looking to apply my expertise. I've established a business dedicated to helping clients achieve success with their electronics, software, and mechanical development. My promise to you is that not only will you get high quality engineering services in a timely manner, but will have the enthusiasm and dedication of an engineer that really enjoys electronics. Most of my industry background lies within the medical industry, but I've also worked with aerospace and audio applications. I love prototyping and making ideas come to life, but also enjoy supporting those ideas from start to finish. I've helped a number of clients so far and I'm looking to further increase my portfolio! When I'm not working I enjoy hiking, woodworking, scuba diving, surfing, and traveling. More info about me can be found on my website: www.metznerprototyping.com

United States, Washington, Maple Valley | Engineering & Manufacturing | Rating 5.0 (4 reviews)
Electrical Engineer, CAD Design

Electrical Engineer with 9 years working experience in high voltage substation operation.

Philippines, Cavite, General Trias | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electrical engineering, lighting calculation

- currently working as electrical engineering planner on consulting engineers company. - got 3 year experience as F-16 aircraft electrician ( Military job ) - got 4 year experience on very low voltage and low voltage planning (up to 3X630A). - got 2 year experience on Lighting Design, primarily working on AGI32 with IESNA Lighting Handbook 10th version standarts. - graduated as practical engineer on Kfar Galim college ( Israel )

Israel, hefa, haifa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
SolidWorks Professional, Sr. Mech. Engineer

We have competitors, other Companies that offer similar services. Why then, should a potential client choose Connekt, LLC? The answer is simple. We understand the challenge most individuals face when trying to get their new idea to market. Putting together the right development team with the expertise to design, manufacture and launch their new product idea can be daunting if not impossible. We are devoted to turning ideas into reality. Our team of seasoned Engineers will work with you to perfect your design, develop prototypes and provide services to help your new product thrive in today's competitive marketplace. We promise to work with you to integrate a strategic development plan to implement your idea and make it a reality. We incorporate the most pragmatic approach to delivering a superior design that results in substantial savings to our clients. Furthermore, when it is time to fabricate your new design we will deliver prototype parts that are typically 50% below the average.

United States, CA, Grass Valley | Engineering & Manufacturing | Rating 5.0 (18 reviews)
Expert Mechanical/Electrical Engineering Design

We are an established engineering firm in San Diego, CA specializing in mechanical, electrical and electromechanical engineering. We design and manufacture prototypes, as well as help our clients get their designs ready for manufacturing. If you're looking to design, develop, or manufacture a high quality product that your clients will love, we will help you.

United States, CA, San Diego | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical engineering, design reviews, RF

As a Principal Engineer, I have led teams and created detailed designs for high volume consumer products, medical monitors, RF enabled devices, and industrial controls that have generated millions of dollars in new product revenue for my clients and companies. Low power Battery power EMC, compliance and regulatory RF system design RF design and modeling Quick-turn prototypes Design for rugged environments Product improvements leveraging TRIZ. Tolerance design Design for modularity Design and program reviews Create and deliver specialized engineering courses on RF, EMC modeling for companies

United States, MN, Minneapolis | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PLC/Circuit Design/Electrical(Electronics)Engineer

I am Electrical Engineer ( Electronics) . My experience is related to Temperature, pressure, level and flow control devices, controllers, sensors(Thermocouples etc.)and also related to Electrical/Electronic Circuit Design for different project, equipment and electromechanical systems. I am Micro-controllers, PLC and SCADA system expert and have a large experience on robotic field. I can also work effectively for engineering research projects. I have solid background in all mathematics, engineering math and advanced engineering mathematics, engineering sciences, and electrical engineering subjects. I have worked with power system and automation. I am a good circuit designer and expert of circuit designing software. I have developed several new electronic devices. I have also working experience with developing new type of communication system. My main objective is to provide excellent result and client satisfaction.

Pakistan, Punjab, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Control System Engineering

Controls Engineer with 10 years experience in electrical machine design/automation of industrial machines used in manufacturing, PLC and HMI programming, drives integrated motion systems and robotics.

United States, AZ, Phoenix | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Electronics&Electrical engineer (circuit design)

I am a B.Sc engineer in electrical and electronic engineering.i have completed my engineering degree in 2011 and after that i have been working with circuit design, elecrical system for distribution and transmission.i love to design the protection system for mechanical equipment and power system.i know the most technical uses of all kind of doide,bjt,mosfet,capacitor,inductor etc. And also i know the power electronics.

Bangladesh, Chittagong, Chittagong | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical engineering, Electronics Engineering

Diploma in Electronics Engineering, BE in Electrical and Electronics Engineering

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical and electronic product design

All kinds of electrical and electronic product development, software for windows based controls, PLCs and embedded systems. Power Quality Studies and Correction. Control system schemes and wiring. High Voltage equipment design and development.

United States, NJ, Clarksboro | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Engineer and scientist, retired, produce results

I am a retired electro/mechanical engineer and research physicist. I have experience and am comfortable in the following subjects: electrical and electronic circuit design, designing and building electrical control panels, PC board design and production, Arduino applications, ladder logic programming, electrical energy generation (diesel, hydro, wind, solar, nuclear), lighting system design and installation, HVAC system design, and installation, marine electrical systems, piping and pumping systems, hazardous area electrical installation, drilling and mining operations, manufacturing procedures, mechanical systems design, maintenance and repair and others. I am a very competent writer. I write operation manuals, maintenance and repair manuals, and papers on engineering and scientific subjects. I write clear and easy to understand papers. I held journeyman electrical licenses in California, Alaska and Australia and an unlimited welding license from California. I am computer literate.

Ireland, Co. Kerry, Listowel | Engineering & Manufacturing | Rating 4.8 (5 reviews)
Electrical Engineering Expert

Strong desire to build up my career in engineering profession by utilizing my thoughts and ideas along with hard-earned knowledge and skills in the field of Electrical & Electronic Engineering.

Bangladesh, Chittagong, Chittagong | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Retired Electrical Engineer, Consultant, Trainer

I have more than 40 years experience in Electrical Machinery control and design. I retired in 2010 and now lecture part-time in Industrial Electronics. I Consult, mostly in the "metal-can" manufacturing industry and material handling. I am really not looking for work, but rather fancy myself as a "freelance" trainer & mentor for the new generation of Electrical Engineer. I am presently doing an in-plant "electrician" skills assessment of a companies electricians and proposing a suitable skills development program. That's the sort of 1 week here, 2 months there sort of freelance involvement I am looking for. Online eLearning electrical instructor sounds like an ideal thing for me. I also do Electrical Machine Control CAD drawings, I use El-Cad and samples of my drawing and design work is shown in one of my "portfolio" attachments.

South Africa, Western Province, Cape Town | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Design and Product Engineering

Hi there. I am a professional electrical engineer and a website developer for project and product design needs. I have a strong academic background and professional experience in the engineering and manufacturing industry. Many of my skills involve embedded systems, automation, and micro-controlled devices. If you are an employer looking for a knowledgeable engineer and designer, I have the skills to be innovative, creative, and professional with your project! Please check out my profile and feel free to message me directly.

United States, TN, Memphis | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical engineering and product design experts

Our Founding Engineer, Addison Shelton, received a Mechanical Engineering degree from Stanford University, and have a very large breadth of knowledge of mechanical design, from large-scale production equipment to intricate consumer products. Addison worked as a mechanical engineer at Apple, Inc., where I was the lead engineer on the development and manufacturing of the iMac display unit. I currently run my own product company, www.thetasklab.com, as well as an engineering and design firm (www.kickrdesign.com). Our team has industrial design, mechanical design, electrical engineering and product manufacturing experience that I am excited to leverage to help you with your project!

United States, GA, Atlanta | Engineering & Manufacturing | Rating 5.0 (2 reviews)
Electrical Engineer

-Electrical engineer since 2007 with master degree in "electrical system". - I realised project using LabView for automation systèm. - I realised MPPT program using SIMULINK dsPIC Blocset -Worked for 2 year as quality engineer with Remy Tunisia. -Now working as advisor with governoment since 2011. - good skill on using office, internet.

Tunisia, Al Munastir, Monastir | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineering Design /3D printing service

This is the right place if you look for an outstanding new product design, reliable 3D printing and rapid prototyping service, highest quality Mechanical Engineering and CAD and neat high detail renderings. More at: www.goalengineering.mk

Macedonia, null, Veles | Engineering & Manufacturing | Rating 5.0 (7 reviews)
Electrical Engineering Services Provider

Zuno Engineering was started in 2011 when we identified a need for a “simple” solutions provider in the engineering and science domain. Based out of Fort Wayne, Indiana we specialize in the design, build, integration, test & support of systems with varied complexity – but all designed to be intuitive and easy to use. We are a group of highly talented engineers and scientists with a broad range of skills in electrical, software, mechanical and systems engineering. We also provide prototype build /test services along with product assembly capability including PCB builds, electro-mechanical assembly, wire prep and final packaging. We are your source for your complete product development needs. In this way we are extremely cost effective in that we don’t burden simple projects with the overhead and expense required of more complex designs.

United States, IN, Fort Wayne | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical / Software Engineering

A small engineering company with a special focus on digital solutions to real-world problems. Our expertise encompasses a wide-range of fields within electrical, computer, software, and mechanical engineering relevant to companies large and small in all conceivable industries. We can take a product through its full development cycle from chalk board to the finished product. Some information: https://drive.google.com/open?id=1CAerDs53Oto687RxtQZh697ZWP_Zin7OnaJiqNszLUY

United States, TX, Lockhart | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Experienced electrical engineer and drafter

Electrical engineer with four years of experience in several areas related to design and construction of electrical installations mainly in the Oil&Gas Industries. Design and development of electrical systems such as lighting and outlets, grounding and lightning protection, aboveground and underground raceways, cable calculation and load summary, Bill Of Quantities (BOQ) and BOM documents, requisition of equipment and materials. Proficient in specialized software such as AutoCAD 2D, DIALux Lighting Software, Intergraph Family Software (SmartPlant 3D, Electrical and Materials) and Adobe Family Software (Fireworks, Photoshop, Dreamweaver and Acrobat). Worked with national and international engineering practices and standards.

Australia, New South Wales, Wollstonecraft | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer / Designer

Professional Electrical Engineer and Certified Photovoltaic Systems Installer with over 8 years of experience in electrical engineering design, renewable energy design and energy efficiency improvements for pharmaceutical, commercial, residential, health care facilities and government buildings.

Puerto Rico, Puerto Rico, San Juan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer (Projects, Maintenance)

Working as Project Management Professional in FMCG sector, also having an experience of Electrical & Instrumentation maintenance and troubleshooting.

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical Engineer and Designer

Experienced engineer, program manager, and executive leader with significant fortune 100, fortune 500 success. Significant technical skills in CAD design, solid modeling/rendering, electrical/mechanical based architectural design, modeling/simulation, digital prototyping, electrical schematic capture, and requirements management (ie...DOORS). Professional employment experience include Boeing, Lockheed Martin, and U.S. Air Force. Academically trained in Electrical Engineering with an ABET accredited engineering degree from the University of South Carolina. Advanced/Graduate education received and completed at Syracuse University. Engineering & Leadership experience extend 15 years. Other competencies include IP Networking, Software Design, Software Integration, System Administration, and Systems Engineering

United States, CA, Los Angeles | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electrical design engineer

Professional, highly qualified Electrical Engineer with 8 years experience in electrical engineering and design work .

Ukraine, Kiev, Kiev | Engineering & Manufacturing | Rating 0.0 (0 reviews)
ELECTRICAL & ELECTRONICS ENGINEER

Qualified Bachelor of Technology (Electrical & Electronics Engineering) from Jawaharlal Nehru Technological University Kakinada; accented with the latest trends and techniques of the field and having an inborn quantitative aptitude & determination to carve a successful career in the industry Understanding of all basic aspects of Electrical and Electronics and up to date knowledge of latest technological advancements, regulations & guidelines and statutory compliances in the industry Possess knowledge of Power Systems, Electrical Machines, Electrical Measurements, Instrumentation, Switch Gear Protection Basic Electronics, Digital Electronics, Microcontroller-8051, Processors-8085/8086 and Electronic Power Supply. Enriched with the ability to learn new concepts & technology within a short span of time. Conceptually strong with an innovative & analytical approach to work with an eye for detail Outstanding communication skills, verbal as well as written cou

India, Maharastra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer with a Green Perspective

I am an Electrical Engineer currently implementing BS7671 and related electrical standards. I am also a technical instructor in the field of Renewable Energy Systems and related technologies.

Oman, Ash Sharqiyah, Ibra | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Design Engineer

Standout with great design ! With over 6 years of designing the Internal Electrical Installations and Electrical Works for housing buildings, schools, clinics, hospitals, institutions and companies. - Designed and prepared Electrical drawings designs with amounts agendas for Internal Electrical Installations. - Designed transmission lines and distribution networks of electric power systems with high power quality. - Made calculating programs of Electrical Designs and for losses of the electrical power system ( subscribers cables, loaded transformers, Improving power factor for the Low Voltage and Medium Voltage networks ). In addition to that , I am a professional translator with a great experience. I am an associate member, a volunteer and participant at Gaza English Club. I have a wide experience in translation documents, stories, tutorials and customs.

Palestine, Gaza Strip, Gaza | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineering

I am an Electrical Engineer with vast experience and a comprehensive knowledge of desired skills and specifications, such as fundamental concepts of energy and power involving physics and mathematics, as well as electricity generation, distribution and storage. Energetic and inquisitive, enjoys solving problems by analysis and adapting to find a good solution, whilst seeking to find novelty. I have been working on several projects involving the fundamentals of energy, power systems, and renewable energies. I have good knowledge on the development of equipment and facilities used for medium voltage (MV) and low voltage (LV) electric power distribution, gaining specialised work experience in electro-technical facilities and undertaking a high level training courses.

United Kingdom, Wales, Cardiff | Engineering & Manufacturing | Rating 4.2 (1 reviews)
Electrical Engineering & Power System Studies

We specialize in Short Circuit & Coordination Studies, Equipment Evaluation, Arc Flash Studies, Power Factor Correction and Harmonic Analysis for Power Distribution Systems. PSCi provides Electrical Design and Service Planning including drawings, load analysis, and calculations to size cables, conduits, transformers, protective devices, panels and low resistance grounding systems. Although new to ELANCE, James Montgomery (A US Citizen & Owner) is a Registered PE with over 20 years of experience in electric power distribution system design, planning, maintenance and study analysis. He has a utility Background in 13-35KV Distribution Planning, Low Voltage Underground Network Design, Pad-mounted Transformer installations, OH/UG/URD Primary Line Extension, Electric Service Planning, Grounding Design and drawing development.

Dominica, Texas, Texarkana | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical / Lighting Design Engineer

Hello Everyone, I am an electrical / Lighting design engineer with 5-years experience. My experience in Elec. and LTG design give me excellent sense for both economic and aesthetic issues. Now I am a team leader of nice group handling professional layouts daily. Regards, MAM

Egypt, Nasr City, Cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PCB Designer

I am a person of many electronic engineer with Design experience of up to 5 years. High quality and low price. Have designed and made many device which used CPU, DDR2, DDR3, LCD, etc. Also can develop firmware and prototype. I will do my best for you.

China, Liaoning, Shenyang | Engineering & Manufacturing | Rating 5.0 (15 reviews)
Translator for IT, Mechanical & Electrical Eng.

Native (target) language: Chinese; Source language: English. I was a software engineer and a self-employer on e-Business. Since last October, as a translator, I translated English to Chinese for a big web project "American encyclopedia". I in charge of the following topics: 1.Top 100 American Army/Navy/Air Force/Marine; 2.Top 100 American Publishers/Newspapers/Magazines/TV Stations/News Websites; 3.Top 100 American Journalists/Authors; 4.Top 100 American Building Developers/Builders; 5.Top 100 American richest communities/cities etc. My degrees: 1.MS for Computer Science, California State University; 2.BS for Mechanical Engineering, Taiyuan Heavy Machinery Institute. BTW, my father had more than 30 years’ experience in the Engineering of Electrical Power.

United States, CA, La Puente | Engineering & Manufacturing | Rating 0.0 (0 reviews)
An Electrical Engineer well versed in field

An Electrical Engineer by profession who has all the technical skills and knowledge related to Electrical, electronics and telecom fields

Pakistan, ICT, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3D Modelling, Manufacturing Design, Electrical D.

Master`s Degree in Electrical Power Engineering, Mechanichal Engineering, 3D Modelling, Design. I use AutoCAD 2015, Solidworks 2014, Visio 2010, MathCAD 14 etc. In the present I work with Draexlmaier Automotive Group, eTelecom International, gasNatural Fenosa and another big and small companies. Guarantee for all clients good quality of work for resonable price and terms.

Moldova, Republic Of, Riscani, Costesti | Engineering & Manufacturing | Rating 5.0 (5 reviews)
Electrical and electronic engineering

Electrical Engineer with 3 year work experience in power generation product business. I offer to my customer help in Electrical / Electronic related projects, preparation of SLDs, Layout , P&ID on AUTOCAD , Expert in Diesel genset application, technical report writing, article/blog writing, preparation of presentation, analysis/audit and other reports on MS excel I am competent engineer able to meet decided deadlines, maintaining quality deliverables with cost effective reliable solution to my clients.

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Amped To Serve You Better!

17+ years in the field of Electrical Engineering. Registered and Licensed Professional Electrical Engineer, Power Management Specialist 2009 - up to present Responsibilities involved planning and design of electrical equipment upgrading and supervise for the installation of electrical apparatus like transformer of various sizes, motors of various sizes and termination of medium and low voltage power cables. Involve also in maintenance of substation and various electrical equipment. Electrical Supervisor 2003 - 2009 Responsible for electrical maintenance and operations of transformers, steam turbine, diesel generator, motors, substation maintenance and other electrical related activities of the factory including building wiring, ACU maintenance. SPECIAL SKILLS : Design, Planning High Voltage and Motor control Termination Hot Welding works Computer Literate ( MS Office, AutoCAD )

Philippines, Bukidnon, Malaybalay | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical & Electronic Design Engineer

I have an Extensive knowledge of PCB layout and design principles . Deep understanding of multilayer PCBs and RF design concepts . Proficient in the use of Burn-in, Cadence CAD, Altium tools and simulation tools . Sound familiarity with fabrication and assembly processes .Excellent problem solving abilities ? Solid observational skills Full to Real Prototype I m Master or Expert in MATLAB and other programming. . YOUR SATISFACTION IS MY FUTURE. I bring a positive attitude, great communication skills and passion to my work. Waiting for your call! Thanks

Pakistan, Punjab, Sargodha | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

Electrical Engineer with major in Computer System Engineering and Automation. Master in Solar Energy Engineering. I have proven track of successful project deliveries, unique and proven analytical thinking and problem solving skills.

Macedonia, Victoria, Melbourne | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Engineer of BC and Electrical systems

I am designer of electrical systems. For today I have completed the lightning protection and earthing for 57 objects (Sea ports, plants and civil objects) (IEC 65203). For today I have completed 120 designs of illumination and electrical power supply for industrial and civil objects. For today I have completed near 1000 3D-models and mechanical designs. I have Pre-Intermediate level of English.

Ukraine, Odessa, Odessa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Electrical and Computer Engineers

We are professional Electrical and Computer Engineers with over 20 years of experience. We specialize in rapid prototyping and end to end electronic designs. Our strengths include wearable technology design, firmware and software development, board design and layout, microelectronic designs, Bluetooth 4.0 LE, power supply design, Android and iOS apps, and renewable energy systems.

United States, CA, San Diego | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Tomorrows' Engineering Today

Holland Engineering & Technology (HEAT), P.L.L.C. is a full service professional engineering firm. HEAT, P.L.L.C. can provide engineering services from the initial conception to market. Our services include: design, development, verification, validation, analysis and rapid-proto-typing. HEAT, P.L.L.C. can provide the engineering services you need to complete your project(s), no matter the size in a timely, efficient and cost effective manner. HEAT, P.L.L.C. believes ALL PROJECTS receive the same high quality from start to finish, large or small.

United States, TX, The Woodlands | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Qualified Electronic Design Engineer

Offering a complete electronic systems design and consultancy service. With small overheads I can impart a professional personal flexible service to deliver a quality reliable product at low design costs. An innovative, well-organised individual with an extensive background in electronic system design and product development. An effective, disciplined and reliable worker who has the ability to meet targets and objectives and has the persistence to achieve the highest standard in every undertaking My name is Dave Lelievre and I am an innovative, well-organised individual with an extensive background in electronic system design and product development. An effective, disciplined and reliable worker who has the ability to meet targets and objectives and has the persistence to achieve the highest standard in every undertaking. I have been an electronic design engineer for over 35 years after graduating in 1975 with a first class honours degree in Electrical and Electronic Engineering.

United Kingdom, Dorset, Poole | Engineering & Manufacturing | Rating 5.0 (19 reviews)
Designing, Prototyping, Manufacturing, &Sourcing

Utilizing my experience in design, manufacturing, prototyping, and sourcing; I provide the complete solution to my clients. I am a mechanical engineer with a background in design from consumer products to heavy industrial engines. I work with a wide range of manufactuiring techniques and looks at the best proces for the part leading to the best cost. I have a eye for quality and making sure product is able to be manufactured. I have experience with building prototypes and with sourcing for manufacturing.

United States, WI, Waukesha | Engineering & Manufacturing | Rating 4.9 (22 reviews)
Electrical Engineer - Embedded HW & SW Design

Electrical engineer with more than 30 years experience in hardware design, firmware and software development, system design and integration, and manufacturing. Expertise: ? Digital and analog circuit design ? Microprocessor and microcontroller hardware and firmware ? Low power design including energy harvesting ? FPGA design - Verilog and embedded processors ? Embedded C/C++ programming ? Embedded Linux board support and drivers ? Bootloader and other low level programming ? Python and Bash scripting ? Technical writing ? PCB layout ? PCB assembly (Own a pick and place machine) ? Benchtop CNC machining I can help on most any part of your project including developing requirements, system design, hardware design, firmware, software, documentation, and manufacturing.

United States, UT, Salt Lake City | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Professional Electrical Engineer, CAD drawings

I am a professional electrical engineer with many years of experience in the building industry. I can do any electrical type work, solar pv design, green building advice and energy efficient designs. I can also do any CAD work. My work is always detailed, thorough and on time.

South Africa, null, Western Cape | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer Master Degree

Hi I am an Electrical Engineer (Master Degree) with many years of experience. I have been working for many international companies and as privarte consultant.

United Kingdom, Devon, Barnstaple | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Efficient & Robust Engineering Solutions

I am a professional engineer in the state of New York, and have engineering consulting + design and power engineering experiences in electrical field. 9+ years of experience in the field of electrical engineering.

United States, NJ, Fort Lee | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

Office Manager / Electrical Engineer @ SBCE SBCE is an Electrical Building Services Consultancy in Pakistan specializing in outsourced work from Australia and New Zealand. We have a total of 2 Senior services drafters and 2 Electrical engineers.

Pakistan, null, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Investigative Engineering Consultants

IEC & Associates provides Electrical and Electronic Forensic and Investigative Engineering, Patent Infringement Analysis, Claim Chart Mapping, Reverse Engineering, Product Teardowns, Failure Analysis, Design Engineering, and Expert Witness Services for Attorneys, Insurance Companies, Industry and Government. We specialize in electrical and electronic systems, products and devices. Issues addressed include all aspects of the product or system under forensic investigation or patent infringement review including design, fabrication, production, operation, failure analysis, reverse engineering, environmental conditions, agency compliance, safety, and product testing of electrical and electronic systems, products and devices as well as computer systems, hardware and software.

United States, NC, Raleigh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineering, Teaching, Programming,

I'm Electrical Engineer with strong basis in Electronics, Embedded Systems, and Power Electronics. My skills are, C Programming, Digital System Design (PLC, FPGA, Raspberry Pi, Arduino, Micro-controller (i.e. PIC, At-Mega etc.), Circuit Designing, PCB using Eagle Soft, or Proteus, Teaching any of the Electrical Engineering related courses plus can prepare quizzes/exams etc.. Excellent Management Skills, with team lead background, self business management, and Excellent communication skills.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Design of electrical & special systems, fire alarm

What can I offer: - design of electrical systems (Medium and Low voltage). - design of electrical switchboards / switchgears in MV and LV. - design of special and security systems, such as fire alarm systems, gas detection, CCTV, intruder alarm, supervision, etc. - design of electrical power plants via renewable Energy. - classification of hazardous areas (IEC / EN 60079-10-1 / ATEX Directive). - lightning risk analysis. - drawings in autoCAD 2D (no 3D). - technical translations in Italian/English. Electrical Design Engineer, with broad experience gained over 25+ years in consulting, design, testing and commissioning of electrical systems, security and special systems (such as fire alarm systems, gas detection, CCTV, intruder alarm, supervision, etc.), work management for Public Bodies, Military and Private companies. Chartered status as Professional Engineer, licensed since 1998.

Italy, Friuli Venezia Giulia, Pradamano | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Design Engineers, CAD & QS Technicians

ENGSOL has a qualified and well experienced team of Structural, Electrical & Plumbing Engineers, Infrastructure Works Designers, Quantity Surveyors and CAD Technicians. We have successfully completed a number of projects having varied functional requirements including Residential, Commercial, Healthcare, Institutional and Industrial Buildings, Water towers, Underground Water Tanks as well as Infrastructure Development Works.

Pakistan, Punjab, Wah Cantt. | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical (Power) Engineer, Industrial Engineer

« A clean World for a long and active living » I love people and the environment. Therefore I want to help you enhance people´s lives and our World. To accomplish this, I have developed my skills to design and build spaces that are based upon renewable energies. I studied a 5-year degree (BEng+MEng) in Industrial Engineering and got specialised in Electrical Engineering. This is a multi-skill degree that makes me a great asset for any project because of my knowledge about all the different fields of Engineering. Thanks to my proactive spirit, I led a group of students who together with a department of the University of Seville, develop of project about renewable energies that reach the semifinals of a nationwide competition in 2013. Working for companies like ABB and GE, Not only did I improve my technical knowledge and skill but also working in a team and managing tasks. Challenges keep moving. Improve our World, my passion. Choose me, and you will never regret.

United Kingdom, null, Manchester | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer/AutoCAD draftsman

I hold a Bachelors degree in electrical engineering awarded from Tennessee Tech University in Cookeville, TN. I am currently searching for freelance opportunities to supplement my current position as staff electrical engineer at a small engineering firm in Tullahoma, TN, where I began working after being awarded my degree. In my current position, I provide electrical engineering support for MEP construction design for various types of facilities. This support consists of preparing MEP design drawings on my own with the latest version of AutoCad. My design experience consists of basic receptacle circuiting, both interior and exterior lighting layout and circuiting, lighting control design, HVAC and other mechanical equipment power design and scheduling, power panel and lighting fixture scheduling, single-line riser diagrams design, and detail designs. All design is according to local, state, and national building code requirements and standards.

United States, TN, Gruetli Laager | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Contracting, Engineering, Innovation, & Marketing

JA Giunta, LLC is a new company by an entrepreneur with a Bachelor's Degree in Electrical Engineering and a minor in Business Administration from Drexel University. The company's main focus is to provide contracting services to clients in the fields below such as AutoCAD, Electrical Engineering, Microsoft Office, Microsoft SQL, Network Support, & Writing. The company currently consists of the owner and three specialists in the fields of electrical engineering, IT, and networking. Although JA Giunta, LLC is a new company, we stand-by our work as we are all dedicated and hard-working college graduates with personal requirements to provide efficient work with optimal outcomes. The team of JA Giunta, LLC is very diligent and have an eye for detail as we attempt to achieve flawless, professional work. All of our specialists have experience in their respective fields between 6 months to 6 years under large well-known companies. Please feel free to contact us with any questions.

United States, PA, Plymouth Meeting | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Building, electrical, HVAC and MEP engineer

MEng Industrial Engineering (5 year degree) , MEP (Mechanical, Electrical, Plumbing) + Fire Protection and HVAC. Solar termal and photovoltaics. Construction/Building Engineering, Project Engineering / Management. 19 years experience. Managing technical and commercial teams. Ability to plan and manage to a project schedule. Creative, pro-active, self-taught, fast learner, with great adaptation skills and a strong capacity for teamwork.

Spain, Madrid, Madrid | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Qualified Electronic Design Engineer, PCB design,

Creative, result driven young technologist. Change agent and problem-solver with a passion for technology.Holds a 4 year Bachelor's degree in Electronics and communication Engineering and 3 year full time diploma in Applied Electronics.The creator of Bamboo Power Box-A portable solar charger made out of bamboo Major strengths include New product design,analog/digital circuit design, PCB layout design,microcontroller programming and hardware trouble shooting >>Expertise in innovative electronic product designing >>Expertise in Circuit designing of Analog Electronics and Digital Electronics >>Expertise in PCB designing using the simulation tools like Eagle, Proteus

India, Kerala, MALAPPURAM | Engineering & Manufacturing | Rating 4.9 (8 reviews)
Experienced Embedded System Designer

I was a tinkerer as a kid, always fixing or taking something apart and putting it back together. As I grew older, I became fascinated with electronics and had the chance to pursue an electrical engineering degree. I've not stopped learning since, and in the years that followed spent a lot of time working with embedded systems and product development. It's now been more than three decades, and I've acquired some rather unique skills along the way in electro-optics, RF/wireless, embedded, and harsh environment systems. I still get a kick out of making gadgets work, work better, or creating new ones, and enjoy every aspect of my work from brainstorming to production. If it's not obvious, I really like what I do. I've had the opportunity to work in the Mil-Aero, Industrial, Automotive, and Bio-Medical and Life Science sectors. Thank you for taking time to consider me for your electrical engineering or product development needs, whatever your line of business may be.

United States, IN, Pekin | Engineering & Manufacturing | Rating 4.9 (4 reviews)