Highly skilled PCB designer and Engineering Technician. 30 years electronic design experience.
automotive electronics engineer experience of more than 5 years
YÂ² Technology offers over 40 years of combined Engineering experience in the industry. We are listed as an official Altium Service Bureau and have experience with developing embedded products, designing analog and digital circuitry, PCB Layout, and Firmware Development. We are located in the states and are available to work directly with you via web or teleconference, and would love to help you with your design. Visit our website at http://www.y2technology.com/ References are available upon request.
DONE B.TECH IN ELECTRONICS AND INSTRUMENTATION ENGINEER
Engineer with more than 20 years of experience in designing, developing and manufacturing of Telecommunications products. Consumer and key-in-hand. Project Manager. Specialized training.
I did my Bachelor's Degree in Electronics and Communication Engineering in National Institute of Technology Warangal, one of the best University for Electronics. I am now working as Design Engineer in Electronics.
I have senior experience bringing electronics from concept through production. Small independent Electrical Engineering Design and Build firm for discrete electronics and/or control systems. I insure a great deal of pride with work provided and stand by the successful result until an agreed upon successful project end.
I have 12+ years of experience designing and developing custom electronic products in quick-turn environments for both low-volume prototype and quantity production applications. The majority of my experience has been in architecture and execution of embedded microcontroller systems for wireless applications, both low-power and high-throughput. I have worked with 8-bit and 32-bit micros, generating entire products from concept to deployment and every phase in-between.
R&D product designer - concept to production. MsEE and Professional Engineer. Advanced skills include Design/Analysis of Analog Circuits, ALTIUM PCB Design, Digital Signal Processing, Control Systems, Machine Learning, Robotics Systems, Motor Control, Chemical Plant Controls, Adaptive Systems and Artificial Intelligence.
New to Elance, but having rich Industry experience with focus on Multi-Layer PCB Design, Wireless Solutions, Embedded System Design, Communication Systems and Power Management
I am electronics and communication engineer. I have experience with programming and developing embedded systems based on 8051,AVR and PIC microcontrollers.I have also experience of interfacing GSM and GPS with microcontroller. I have also experience of developing various electronics project.
I am a student studing Electronics Engineering. I am in my final year and have free time to work on project (approximatly 20 hours a week). I am currently on summer holidays (I live in Australia). I am working on a Data logger specfically to monitor a solar plants production, which is displayed on a web page. I have hardware and software experience.
Hi! Thank you for viewing my profile. I am a detailed and through professional with 8 years work of administrative and technical AutoCAD drawing experience.I specialized in delivering quality services with respect for strict deadlines and high expectations. I have a 6 years total of administrative experience including typing 40 WPM, data entry, MS office with technical skills in AutoCAD, Sketchup, Photoshop. I'm looking forward to work with clients who are willing to put my skills on the line and do business together. Thank you.
Meskotech, Inc. is a small Michigan-based engineering firm with manufacturing capabilities. It provides creative engineering solutions in many fields including embedded (microprocessor based), PLC, and PC based controller, product CAD design, and custom CNC software.. We also provide other engineering services in the areas of fluid mechanics (CFD), heat transfer, mechanical engineering and analysis, and electrical engineering (software and hardware). Meskotech, Inc. was established in 1996 and is headquartered in Michigan. We have several partners (customers) in Detroit area that we can provide as reference. We value our partners by providing the best possible service and also sourcing work to them when possible.
30 - years experience of Product Design,Manufacturing Design,Other Engineering and Manufacturing,Electrical Engineering,Digital Electronics,Construction Monitoring,3D Printing,clothing manufacturing,mobile phone parts supplier
I just graduate my diploma in Electronic Engineering
Developer of firmware, hardware and automated tests of the same in medical implant field. Strong multi-disciplinary background in analog, digital and RF engineering with ability to learn quickly. Eager to take on new challenges and lead teams to drive problems to solutions. Check out my personal website at: https://sites.google.com/site/ddmcintosh2projects/
i am a 4th year university student taking a B.Sc in electrical and electronics engineering at the Dedan Kimathi University of Technology. i love doing research on my free time and more so available online almost always. hard work is the simple rule i use to success.
Hello, I am an electrical/electronic engineer experienced in design and implementation of embedded systems and power electronics. Sensor based systems, stepper and DC motor interfaces using C, Atmel Studio, Arduino and Freescale CodeWarrior. MCU board hardware design and interface electronics. Power electronics circuit design, DC-DC converters, custom transformer design and PCB layout.
I am an electrical and electronics engineering student, currently searching for a part time online job. I can do any kind of administrative work. I am a electrical and electronics project developer and researcher.
We are a product design firm with a strong background in electronics and programming. We have successfully designed and fabricated multiple products and would be happy to help you complete your product today!
Responsible for the timely completion of corrective and preventative maintenance actions on food processing machinery. Maintains equipment readiness during peak production runs.
I hold a BachelorsÂ Degree in Computer and Electronics Engineering with over 4 yearsÂ experience in Solar Energy Sector in various capacities such as Consultancy, installation, commissioning. My core competencies include Energy Analysis, Led Lighting, Solar Lighting, Solar Water Heating and Pumping and Energy Management Consultancy for Domestic, Commercial, Institutional and Industrial facilities.
I'm studying in Engineering Faculty.. Control System and Instrumentation Department, Thailand I have skills - Automation / Digital / Circuit / Micro controller - PCB / Embedded Systems / Monitoring System / Electronic Thanks for your time to read my profile. Look forward to work with you. Best Regards, Thip
Fast, on budget, quality engineering. From scientific to artistic, turn your concept into reality. Specializing in interactive system design and engineering.
Hi! I'm contract PC B designer who sometimes join interesting projects on freelance basis. If you have have complex, non-standard and sophisticated PCB design to do, targeting high-end market segments with outstanding requirements for quality and reliability- that is where I can help you. My tools are Altium Designer, Cadence Allegro, Pentalogix Viewmate Deluxe, PCB Library Expert Pro and Solidworks. Design areas: - SoM/SBC, motherboards/carriers ARM MCU/CPU architecture is preferred, also have experience in designing PCB for Intel Atom/Core last Gen(all after 2012), Xilinx Gen7 FPGA, - SMPS Multiple kinds of AC/DC and DC/DC, single and multiphase, high power with PCB specifics(copper buses, ultra-hick copper, direct on-PCB copper wiring etc.) - RF High-Speed front-ends for SDR, frequency synthesizers, combining RF blocks with mixed signal circuitry. I DO NOT JOIN: - projects outside US/EU regions - software design - startups - low cost and ho
My team has extensive manufacturing and operational experience with expertise in all aspects of plastic injection molding based manufacturing. Design Rapid Prototyping New Product Introduction High Volume Manufacturing Production consulting Services We can do it all! We are a profitable, stable, fast growing company with healthy, growing revenues and profits. We pride ourselves on the level of commitment we give our customers and we realize that our service is our strength. Let us Solve your next manufacturing challenge, and put our team of experts and resources to work for you!!
Experienced in hardware testing as engineer in an Electronic Brake System company. I design circuits with minimum risk of failures.
I did first class engineering degree from National University of Science and Technology (Islamabad) coupled with hands-on experience of working with the global electronics products/solutions provider confident of further adding value to your products and services. The confidence is a result of furnishing so far technical leadership, direction, guidance and engineering expertise to members.
Enterprising Industrial Electronics Engineer offering a distinguished career of over a decade in Embedded Systems Programming, Data Communication, Real Time Embedded Systems based on various Micro controllers, Microprocessors, Risc processor.Displayed credentials in developing and implementing: Embedded linux Device Driver.BSP development for Embedded Linux Platform.Communication system interfaces for RS232, RS485/RS422, and TP LINES using C.Hardware and software for SPI, I2C busses Hardware interface for GSM/GPRS modem and related Software.TCP/IP UDP SNMP based system.Real time software .Interrupt Service Routines and Drivers for Asynchronous and Synchronous serial communication, timers, A/D Converters using various devises.Digital I/O card, circuits for Timer/Counter using 8253, Serial Interface card, Card.Hardware interfaces with various microcontrollers, memory interfaces, and PLD/CPLD FPGA interfaces.Hardware interfaces for RFID Smartcard Reader, magnetic Swipe card Reader'
Engitronic is a high-tech engineering service company specializing in the development of embedded software and hardware projects Please, visit www.engitronic.com for more information We look forward to hearing from you!
We are a company of designers, engineers and manufacturing experts for turnkey services from concept to mass production ! Our expertises include concept design, industrial design, mechanical engineering, electrical engineering, PCB layout, firmware/ software programming, prototyping and test, mass production and fabrication !! We help individuals, startups and firms to turn their idea into reality by turnkey solutions from concept to mass production with great quality fast turn around but still affordable cost !!! We have done more than 180 projects on Elance. with 120+ clients and over $220,000 earnings since Aug,2009 !!!!
We introduce ourselves as a society having a competent staff of electromechanical/mechanical engineers, experienced and competent in mechanical and electrical design and simulation. We are seeking for potential cooperation and working opportunities mainly in mechanical design, dimensioning, simulation,finite element analysis.... In fact, our team master several softwares such as SolidWorks, Autocad, Abaqus...
I'm an senior electronic engineer with more than nine years of experience working with FPGAs, HDLs, Digital Design, DSP, embedded, ... I have worked as a R&D engineer designing equipment for RF microwave using software defined radio concepts, implementing them into FPGAs. I developed arrays of digital filters using FPGAs (including DSP, comm. control) AM/FM mod/demod, digital schemes mod/demod (DQPSK and others). It was developed a break-in system also who has a patent application. I've used high density design for FPGAs, using up to 99% of consumption, I have experience in ASICs and CADENCE tools, participating testing a library based on MCML, an approximation for achieving a lower power consumption. Also, I've developed small projects like battery charges with altera tools, quad encoders, test of IPs for fabrication and other small projects.,
Master in Embedded System Design. Expert In PCB Design, Microcontroller programming (ATMEL & PIC) & Electronic Design. 16+ years experience in this field. Expert in MCU development board design (Arduino, PIC & ATMEL).
Hi, This is Mizanur Rahman Roomi and I'm an Electrical and Electronics Engineer. I have extensive experience in the areas including PCB design, Embedded System, Analog and Digital Circuit Design, Circuit Simulation, Arduino etc. I have taken many ideas and developed them into commercial products. My aim is to deliver a quality reliable design at low design costs. I can offer complete electronic system design and consultancy service in this field. CLIENT SATISFACTION is a key point to me. That's why I always provide my client FREE TECHNICAL SUPPORT, even after the contract ending.
PCB Designer - Over 20 years of experience in design layout and mechanical engineering of Rigid / Flex / Rigid Flex. I have multiple resources to help develop Electronics from Engineering to Fabrication to Assembly. I have both domestic and offshore resources for manufacturing.
I am Electrical and Electronic Engineer from Bangladesh. Last five years I have been working on industrial automation system, web development, technical blog writing, electrical power system modeling and simulation, micro-controller based intelligent system design, power electronics, application of AI in power system especially integration of renewable energy sources to grids line for optimal efficiency etc To potential clients, you are welcome to hire me on different projects on electrical & electronics engineering, technical blog writing and web based services and my objective is to offer you quality and unique service at my best.
Embedded system design Embedded systems / Firmware programming Digital synthesis and mixed-signal design System and Application Programming
10yrs experience, enthusiastic and committed to excellence.
I'm a freelancer with vast experience embedded system design and mixed signals circuit design.
Girish is an Independent Embedded Systems Consultant with over 15 years of industry experience predominantly in firmware development. He provides services in the Embedded Systems domain. His skills covers both hardware and software like designing microcontroller/microprocessor based products, programming, RTOS and communication protocols. He has experience in building requirements and specifications, design document, test plans, writing application notes, technical paper, user manual & data sheets.
Hello. We are a team of Embedded System Developers/Designers involved in developing Embedded Systems based Projects, Product Development and also providing Customized Embedded Solutions. We have worked on Technologies like : G.S.M./G.P.R.S. , Bluetooth, Zigbee, RF, R.F.I.D., 4 Wire Resistive Touchscreen, TFT LCD, Wi-Fi, etc based on 8051 / AVR / PIC / ARM 7 / STM8S / Arduino We reside in New Delhi, India and have a personal Lab for Development Work. We believe in staying true to our Profession and deliver the Best Work to our Clients. Specialties: Customized Embedded Solutions, Embedded Products, 8051 / AVR / PIC / ARM7 / Arduino Micro-controller based Projects, PCB Layout, Product Design, Robotics, Logistics and Technical Support
I am an electronics engineer with 30 years experience in industry and academia. My degrees are from Rose-Hulman Institute of Technology (BSEE) and Purdue University (MSEE). I am a Professional Engineer licensed in Indiana. My experience includes extensive design work in analog, digital and mixed-signal circuits, digital and analog signal processing, signal and data analysis, software development and testing, PCB design, system design and analysis, and system modeling with Matlab / Simulink.
I provide marketing research, design consultation, mechanical engineering and rapid prototyping services. My diverse experiences include a number of successful product launch activities for leading manufacturers in their respective fields. Confidentiality is very important to me. All information is property of our clients and not shared unless authorized.
Expert Electronics & Software Engineers with 10+ year experience in product design from concept to product. worked on Android,java,PHP,web based applications desktop based applications,mobile based applications,8,16,32 bit controllers, 1,2,4 and 8 layer PCB design, Renewable energy products,Motors Drives,Power Electronics Designs, etc
Keen and professional engineering company with over 10 years engineering and hardware design experience gained from a diverse range of science and industry environments.
My name is Alexander (Sandy) Templeton. I am a 30 year semiconductor industry veteran offering comprehensive hardware and firmware design services in the interface, control and measurement world. In addition, I am an isolation specialist and have designed products for automotive, medical, commercial and space environments and am highly knowledgeable in battery systems and solar power electronics. I also understand Google and know what it takes to get a web site to rank without risking non-compliance at the next search algorithm update. I offer complete SEO services including recovery from Google penalties. I am not the cheapest guy on Elance, but I can guarantee I will get the job done in a professional manner with full documentation and a final work review. I prefer fixed fee contracts so that the customer can see exactly how much they'll pay.
I always aim to do quality work that builds long-term relationships. I have more than 15 years experience in engineering cost effective solutions including embedded computing, software integration and operations, renewable energy system sizing and component selection, supervisory control and data acquisition (SCADA) and utility control systems. All that built on top of a Bachelors degree and a PhD in engineering.
- Experienced Hardware Design Engineer on Microprocessor and Micro-controller based embedded system. - Experienced on Automotive, Telecom and Network Switch product design Youtube: https://www.youtube.com/channel/UC1E2g8ZI9s2wYvykEHhBvWg Facebook: https://www.facebook.com/mindlabtech
We're team of experienced freelancers willing to work on your projects We develop complex systems: hardware and software solutions for embedded and desktop use. We have huge experience with different microcontrollers, development boards, programming languages, platforms and operation systems. Also we created and designed different DB and managed RDBMS. We're ready to communicate with any employer. We are opened to discussions.
TLab - Experts in electronics engineering
Hi! My name is Jason and I'm an innovative electrical engineer looking to apply my expertise. I've established a business dedicated to helping clients achieve success with their electronics, software, and mechanical development. My promise to you is that not only will you get high quality engineering services in a timely manner, but will have the enthusiasm and dedication of an engineer that really enjoys electronics. Most of my industry background lies within the medical industry, but I've also worked with aerospace and audio applications. I love prototyping and making ideas come to life, but also enjoy supporting those ideas from start to finish. I've helped a number of clients so far and I'm looking to further increase my portfolio! When I'm not working I enjoy hiking, woodworking, scuba diving, surfing, and traveling. More info about me can be found on my website: www.metznerprototyping.com
I work 12+ years in design and development of industrial automation devices. As software and hardware engineer, and than as a project manager I have got an excellent experience in all stages of the development process and device support: - defining technical requirements; - electronic schematics development; - PCBs layout; - firmware development for micro-controllers; - application development for WinCE and Win32; - preparation of technical documentation and advertising material; - production support; - technical support. I am familiar with many micro-controllers such as: Atmel (AT91SAM, ATXMega, ATMega, ATTiny); Silabs (C8051F35x, C8051F41x); Microchip (dsPIC, PIC32); TI (MSP430, Tiva C); Nordic (nRF51) and others. Furthermore, I have a great project management skills, work well with team or alone.
Expertise in Electronic Design, FPGA Programming, ARDUINO, ARM, MATLAB,ORCAD ,SIMULINK , Controller Programming, PCB Designing, Integrated Circuits.
Use my experience in hydraulics, mobile equipment, mechanical power transmission and automation to give your project an extra boost. My recent fluid power certification can go to work for you. I am also a gearhead and fabricator. I build prototypes with mechanical, electrical and electronic components.
I offer services from Idea right through to Manufacturing and Packaging. Conceptual Sketching Full Product Development Point of Sale Design Electronics Design Experienced Graphic Design Prototyping Batch Manufacturing Mass Manufacturing With Specialists in the field of Product Engineering, Manufacturing and Packaging Design, we offer a easy & pleasant experience for our clients.
I am an electrical engineer with a passion for sophistication and innovation in several areas. You can see my profile at http://profile.rilhas.com/
I earned PhD diploma in Electrical Engineering and Computer Science from University of Nis, Serbia, in 2013. I also have 8 years of experience working in industry (SENIS AG, http://www.senis.ch/home) and academia (LIRMM laboratory, France; Technical University of Madrid, Spain; University of Nis, Serbia). For more details about my competences and technical backgrounds, please take a look on my curriculum vitae: https://drive.google.com/file/d/0B1Fi19MNevBWZEdCZm9XU1Q4ZWc/view or my LinkedIn profile: http://www.linkedin.com/profile/view?id=115828008&trk=nav_responsive_tab_profile_pic
I am a twenty plus year lens and illumination designer with particular skills and interest in medical and LED optics. I welcome the chance to assist in a wide variety of optical design tasks to support larger product development efforts.
Over 22 Years Experience! Sem3DDesign provides SolidWorks 3D Product design and development SPECIALIZING IN PLASTIC PART DESIGN MOLD DESIGN. Other services include Assembly tooling, machined part design and rapid prototypes. I also convert 2d drawings to 3D using SolidWorks. Completed work can be exported to many file formats.
Electronics Kapton is a group of experienced engineers working in my lead. I have more than 25 years of experience of working as a PCB Designer and 30 years 35 years of work experience in electronics area. I have worked on almost every type of component package and PCB layouts with various complexity issues like higher current, high noise and switching frequency, extremely sensitive analogue circuits. I can provide layouts meeting international standards. Having worked with multiple organization I have gained higher level of professionalism and can work enthusiastically to provide you deliverable with high accuracy levels. I can provide you circuit design, PCB design, PCB layouts, 3D PCB models, and almost everything related to electronics hardware. I have immense experience of buying normal range to costliest electronics and power equipments and components and can work on great extend for finding component suppliers, developing and reviewing specifications, etc.
Over 7 years experience in both civil and mechanical engineering. I have used both AutoCAD and Inventor.
PMP Certified Techo-Management Professional with 30 years experience in Embedded Product Design & Development, Project management and Firmware development. Extensive customer interaction and global exposure for product definition and delivery management. I have small company with 10 people team to offer complete product design service including prototype and pilot production. In last job, I was Responsible for New Product and technologies developments and getting new business from global customers for Embedded Division. Successfully defined and managed various Embedded / Multimedia Systems Design projects based on DSPs, Media processors, RISC processors and multi-processor designs, in Multimedia, Imaging, Surveillance, Communications and other markets in last 10 years. Major projects Managed: Trans-coding system, Surveillance Cameras, Algorithms porting and optimization, Biometrics Devices, DVR, Wireless video broadcast system, Evaluation boards.
I'm an organized maker. I see problems in the world as opportunities to design a product or solution, but not always a physical entity. I look for elegance and the simplest, most effective way to accomplish the task. Electronic design is more of an art than a science, and with digital it as all about the organization, communication and layers. I'm also a deep thinker. I read almost as many books as projects I accomplish. They tell me all about the human heart. Sometimes fiction is more true than most. I cannot think of people as cogs in a great machine, because each person is somewhat like me. I go for real connections with people, the deeper the better, because best friends are better than lots of friends.
i have work experience both in analog and digital designing
I am having 4.5+ years on schematic and layout design.Also i can support you in PCB fabrication,Component procurement and board bringup
I am dedicated to my work. I always try to learn new things from internet. I think if I start anything I will end it by any means.
- IT and Security System Management and Maintenance - English Teacher (Phonics, Grammar, Writing, Business Writing, TOEIC and IELTS preparation) - Science Teacher (Integrated Science, Chemistry and Physics) - Electrical and Mechanical Machine Design - Radio Frequency (RF) Applications for Wireless Applications - Automotive Electricity - installation and repair - Marketing - Sales of electronic, electrical and communication equipment. - Brokered sales of used cars and real estate properties.
30 years of design, design management, development and procurement experience in consumer electronic devices of varied types including Satellite Radio receivers with associated accessories. Designed LNAs, downconverters; 900 MHz wireless speaker systems, wireless headphones and related accessories; RF remote control systems (433 MHz and 900 MHz). Contributed to Chipset design including RF tuners of various types, particularly in Satellite radio. Developed various types of audio control systems; NTSC based Video and control systems, Fire, Security and Surveillance systems. More recently working on medical instrumentation using lasers and related optics. Currently managing engineering and general operations in a light manufacturing and R&D organization. Seeking new opportunities to apply my expertise and experience. Specialties: RF and Microwave design, Low power Analog, Audio, low power digital, power supplies, Program Management, People management, Project management, communication
"Talent can't beat hard work if talent doesn't work hard." - Anonymous I try to live my life with this quote in mind. There are people who are more talented than others; however, I strongly feel that hard work can always beat talent, and I consider myself a talented, hard worker. I have developed the ability to learn quickly and effectively as a result of my experience working in a professional environment. My early experiences at Harman and with my senior design project have given me hands-on experience with the latest electronics technologies, and the ability to implement them into different applications. My recent work at Delfield has allowed me gain increased exposure to engineering procesess, as well as new experience with manufacturing techniques. Traveling for Delfield has really helped me feel comfortable inferfacing with customers and suppliers. Working with senior engineers has given me increased knowledge in the subject areas covered in college, and has exposed me to im
17+ years in-depth experience with microcontrollers. Currently focussed on Cortex-M (Freescale Kinetis Series). Hire me for cortex based firmware development or efficient porting of your 8-bit designs to 32-bit for performance and cost saving. Also offer quality board development and assembly.
Contact No: 91-9476050047; 91-9933220267 E-mail: firstname.lastname@example.org, email@example.com , Skype ID: rashid19041 ________________________________________ SENIOR TECHNICIAN (ELECTRONICS & ELECTRICAL) Professionally matured electronics & electrical technician with illustrious career of nearly 20 years in providing electronic & electrical operation & maintenance solutions for transmission & broadcasting equipments. Demonstrated functional excellence in implementing preventive, predictive and corrective maintenance to maximise operational availability of equipments. Solid Real-time experience in installation, operation and maintenance of broadcast equipments in the Newsroom, PCR, MCR, Graphics, CAR Room and Studio. Hands on experience in installations and bottleneck-free operations and of PCR & CER Room, Teleport, DSNG Vans, Sony HDW-format camera/VTR OB Vans, online & offline broadcast studios, VSAT network, Ext- C band , C- band, Ku Â band. Acknowledged strengths in maintaining
Â MS Project, MS Office, AutoCAD, Windows, Mac OX, iOS, Solid Works Â Experience with Linux-based operating systems at component level ex. kernel interface Â Basic knowledge of resistors, capacitors, inductors, fuses, switches, oscillators etc. Â Able to use common hand tools (torque drivers, screwdrivers, crimp tools & wire cutters) Â Simulations of electronic circuits, designed and adjusted simple instrumentation circuit Â Knowledge of electronic components and ability to read and understand specifications Â Tested and repaired (PCBA) - motherboards, transceiver boards, modem boards, bias etc. Â Level I Solder certified (Surface mount components, through hole components, soldering wires, removing bridges, rework, replacing and putting on resistors and capacitors) Â Able to use complex instrumentation; knowledge of analog, digital, and RF electronics Â Can use an oscilloscope, multimeter, power meter, attenuator, spectrum analyzer Sonet test transceiver etc.
I started my journey as a electronics technician in the U.S. Navy back in the year 2000. My hard work paid off with great training and many awards over my six years with the military. I gained a lot of experience testing, adjusting, and repairing equipment to ensure satisfactory operation. I also worked as a quality assurance representative overlooking the workmanship of other technicians within my work center. In the fall of 2012, I finished up my classes for my undergraduate degree at DeVry University; majoring in electronics engineering technology. At DeVry, three other officers and I reopened the DeVry Robotics & Automation Club. I was formerly the president of the club. I am a motivated, fast paced, dependable individual. In the fall of 2013, I began a business start-up, J5 Boxes. I am manufacturing dugout smoke boxes. The method of manufacture is molding and machining. I have setup and developed the website for this company and currently fine tuning the manufacturing proce
Fully autonomous e/m design engineer with project management experience. Capable of prototype design and sub-contracted manufacture in Dallas/Forth Worth area. Certified Manufacturing Engineer. Fluent French - Business level.
I am search good job with a good offer and I'm a professional
Good day, I will work for money. I am a capable engineer and have successfully done several projects.
i am 10+ year Experienced in Embedded System Development with PIC ,AVR, ARM,arduino ,raspberry pi also Senior pcb designer since 2004
30 years of design and development of RF and analog IC's for communication systems (such as Cellular, WLAN, WiMAX and NFC). Processes used include CMOS, BiCMOS, and GaAs. Interested in opportunities such as reviewing product proposals, architecture, design, and layout reviews of systems and circuits, ESD, design methodology, design for test, design for quality, help in hiring and training design teams, selection of suitable process for your design, problem solving using 8D process, etc.
I am RF and microwave design engineer having more than seven years of experience designing amplifiers, mixer, filters, switch, couplers, power divider, frequency multiplier, PLL based frequency generator and components used in receiver and frequency generator subsystem of microwave payload used for remote sensing. As a design engineer role, I was responsible for simulation using CAE tools, manufacturing and rigorous testing. This whole process requires sometimes less or more iterations depending on design specifications (complicated or simple) which also involve planning, budgeting and time scheduling in parallel to meet the project deadlines .
Looking for both personal and professional growthwhere I can utilize my capabilities to advance in my career.
Owner of Camoes Educations. It is a service provider company. It provides coaching, tranining, project guidance and industrial service. It provides service in Matlab, Microcontroller, FPGA CPLD
I aim to engage in projects, where I can apply and develop the skills and the knowledge I have acquired so far. I feel extremely familiar with object-oriented languages, and mostly with C/C++. I used them (and other languages as well) in several environments, including for programming embedded systems, obeying to strict real-time constraints. I have also been encouraged to use MatLab and Simulink, and therefore I have become very experienced in those tools. I have always been moved by my spirit of curiosity and auto-didacticism. As a Master Engineer, I am eager to know even more. I am an extremely self-motivated and proactive person that cares about every little detail, and I demand of myself nothing less than perfection in everything I do. During my career I have also acquired strong leadership, organizational, teamwork and deadline meeting skills, by leading/working in teams with more than 8 elements. I am available to take projects that meet my listed skills or similar.
Â ITAR & CGRP certified and work with Tier 1 DOD suppliers and NADCAP customers Â Work with various aerospace clients such as Safran, BAE, Harris, Rockwell Collins, UTS and automotive clients such as Nexteer, Continental, Delphi, Omron, BF Goodrich Â Work with various Universities and Colleges on projects Â Expert is creating R&D and Innovation partnership between a company and a researcher and helping the company qualify for government grants Â Good knowledge of SR&ED programs and write ups Â Thorough understanding of web based applications and web design Â Experienced and skilled in setting up offshore engineering services for an organization Â Experience in reducing product cost by utilizing offshore manufacturing and assembly services and finding suppliers and vendors Â Successfully implemented many Lean processes and flow improvement initiatives resulting in removing redundancies Â Skilled in analyzing and assessing processes, process conditions, workflow and
Free Thinker, accepts criticism openly,hardworking and always trying hard to be more competent in my field of interests.
I am an Electrical Engineer, with 3+ years experience in R&D Sector. I have specialization in Embedded System and Computer hardware Design. I am a position Holder in my University as well as Best project award Winner.
Am expert in the embedded designer. I have done some designs like Beacon, SOM module and wrist band etc.
Expert in solar design products, Having 5 years experience in solar field
I an a registered Electrical Engineer in my country with diverse knowledge and experience in several engineering disciplines. Currently I am a consulting electrical engineer for commercial, residential and industrial building services.
A highly skilled and motivated professional with 8 years of diversified experience in Telecommunications industry. An Electrical Engineer with Masters in Engineering Management, I have vast experience in a Multinational environment that is compliant with International quality standards. I posses diversified skills like Network Design, IP, PTN, DWDM, SDH, Networking, expertise in MS Excel, PowerPoint, Writing, Financial Management, Financial Statements, Income statements, HR Management, Quantitative Data Management.
This is a Cybernetics Electronics Engineer with specialty in Industrial Automation and Robotics, I have expertise working with different programming languages, besides working with different tools for industrial engineering as SolidWorks, Matlab, PLC programming, Labview for vision Systems. I consider myself a professional who likes challenges and keep learning, being versatile in learning very quickly new programming languages. In my projects, I am very strict about the look and feel or the appearance of the projects. You can expect a quality deliverable.
Electrical, Electronics Engineer with a passion to create technology for the benefit of humanity
I am proficient in any issue regarding Electrical Engineering and Circuit Designs. I have an affinity towards PLC and MATLAB and some basic background information regarding C , C++ and CCNA.
Upcoming Electrical Engineer(B-Tech) offering a strong academic background who:- Consistently recognized for troubleshooting skills and cost-effectively resolve challenging issues. Looking for applying academic knowledge to real-world problems. Quickly learn and master new technology; equally successful in both team and self-directed settings; and proficient in a range of computer systems, languages, tools and testing methodologies.
I have excellent skills in PCB design and layout using various software tools such as: Altium designer, Orcad and Eagle. Furthermore, I am specialist in battery powered wireless sensors(either Bluetooth or ZigBee). I have a vast experience in Firmware development for several different types of microcontrollers(e.g. 8051, Microchip pic(8, 16 and 32 bit), Ti's MSP430). I have hand-on experience in most serial communication protocols such as I2C, SPI, UART and USB.
I'm best work quality in designing and hardworking.
Final Year Courses: Power Systems Analysis, Power Electronics, Advanced Electromechanical Systems, Alternative Energy Systems, Power Systems Protection and Control, Electric Drives,Digital Signal Processing, Digital Control System Design, Real-time Computer Control System, Energy Conversion.
Dynamic and achievement oriented professional with proven technical competencies in structuring customized hardware design solutions to meet specific needs. Expertise in the Hardware designing specifically in Mentor graphics and Cadence platforms and High Speed Board Design. Gained rich experience in various project development phases starting with Hardware Design, PCB Design, Worked with various ECAD tools (Orcad, Concept HDL, Allegro, SpecctraQuest Etc.) for hardware design and possess working knowledge of Signal Integrity Tools like Allegro SPB and Hyperlynx.