Complete turn-key design of analog electronics. Specializing in Power Electronics, Power Supply Design and particularly Magnetics Design. PACER, LLC can assist the client with a small-to-medium volume American-base manufacturer.
Electronics engineering and product design services focused on getting products to market and client's position. Altium designer Specialist. &Analog/Digital expert And also in ,Eagle,Allegro, PADS,Orcad,Gerber,C++. I provide hardware and software engineering services for new and existing projects from prototypes to full production, Over 21 years with rich experience in PCB design,circuit/schematic design, RF, MCU,USB2.0,3.0,FPGA,Firmware. Digital Receiver,GSM/WCDMA/TDS-CDMA. In the branch of china mobile and satellte company. I have been working as electronic designer and developed lots of pruducts.All products had a good reputation from customers and from now they have been working in so many fields.( iPhone,Android PCB,satellite equipments.) Standing myself in the position of client,I will complete the tasks of clients with fair- price,good- credit,high-quality and punctuality. As long as client give me a trust and invite me, I will live up to the client's expectation.
Nikhilon is pioneer in designing high speed PCB layouts with High Density designs having micro-BGA, for Mother boards, Single euro, Double Euro, Data cards, Video boards, PCI cards, CPCI cards, Power supply boards, Boards with DDR RAM designs & Manufacturing, including Re-engineering. Nikhilon is a one-stop solution provider for PCB Layout Design & Electronic systems design. Capabilities ranges from system specification to manufacturing including re-engineering. The company provides PCB fabrication support from various global production plants and assembly support ensuring a seamless solution from prototyping to volume production.
I have more than 5 years of experience microprocessor architecture, digital and analog electronics, embedded systems. I can design system based on microcontrollers (8051, 8086, AVR, PIC, dsPIC, ARM), FPGAs, designs analog and digital... Now I'm working for VietNam Television Company Researcher on ESRC lab. (Embedded system laboratory of Hanoi University of Technology)
20 years developing consumer product, from Toys to Tech. Team Management and Leadership - R&D teams - Project Management - Production transition and support - Contractor & Turn-Key Manufacturing partnerships and management Product Development and Marketing - Product Marketing, from market analysis to product feature & cost requirements - Product Sales support, including positioning,
Have 20+ years experience as an electrical/electronics emgineer. Specialties are circuit design for PCBs including Analog, Digital, Mixed Signal, some high voltage (up to 2KV). Multi-layer layout experience, Cable and harness design, and Power Distribution experience. Can build prototypes.
I am post graduate in Physics with electronics Specialization. I have good Research and development experience in Embedded systems and PC based Instrumentation.
We offer engineering and technical expertise for hardware and software development of embedded electronic systems. Application development using popular technologies such as Arduino, Atmel AVR, Bluetooth LE. We are well-versed with C,C++, Java, Altium Designer. Gerald Plamondon is the principal engineer with a degree in Engineering Physics. He has been developing commercial embedded wireless equipment for the last 10 years.
Firmware. Embedded product development. Electronics design, digital, analog. Debug, troubleshooting. 30 years experience. Firmware, Electronics, Software, Systems. Embedded System Development. Debug Hardware, Software. Troubleshooting, Board bring up. Microcontroller systems. Object oriented, Multithread OS, RTOS. Assembly Languages. Windows and Linux Applications. Peripheral chips, Device Drivers. Digital, analog and power electronics. Ethernet, IP and TCP protocols. Motion Control, multiaxis coordinated. Algorithms, Mathematics, Physics. Modeling, Simulation. ARM, DSPic (Microchip), Blackfin (ADI), AVR (Atmel), TMS430 (TI), X86, 8051 Mathematics, Physics. B.A. UCSD, Physics and Mathematics Ph.D. Cal Tech, Experimental Physics
Kamran Arshad is an active researcher in the field of RF & Microwave and Electronics engineering and has a practical experience in design and development, equally at circuits and systems level. He has expertise in the following areas: 1: Hand-on experience in Altium Designer, Orcade, Proteus, Micro-wind, PCB Express which is used for analog & digital circuit Designing + Layout Designing & Development 2: Hand-on experience in HFSS, CST, ADS which is used for RF-components and Antenna designing 3: Hand-on experience in Microcontroller devices, FPGA kits, PLC kits
Mechatronics Engineer with 5 year experience in CAD, PCB designing, circuit simulation designing,micro and analog electronics, microcontroller programming and Matlab. I can ensure you that your projects will be executed to perfection in the most simple and straight forward fashion at a very reasonable price. I promise to deliver creativity, innovation and reliability in my product. Most importantly I pay due attention to deadlines and customer satisfaction.
We are a small startup with many skills in engineering. We have over 30 years of combined technical industry experience. Knowledge involves development of control systems for data measurement and acquisition, custom software development, custom hardware electronic development, PCB design and more (www.LDIntegratedTech.com). Also able to adapt, and perform technical deep dive to quickly solve problems.
We are professional Electrical and Computer Engineers with over 20 years of experience. We specialize in rapid prototyping and end to end electronic designs. Our strengths include wearable technology design, firmware and software development, board design and layout, microelectronic designs, Bluetooth 4.0 LE, power supply design, Android and iOS apps, and renewable energy systems.
Embedded System design and development including analog and digital hardware and firmware for 8051, 80251 and PIC microcontrollers. Also power electronics and motors. Design reviews and troubleshooting, too.
EEG provides complete product design services. - Concept Development - Industrial Design - Electronic Engineering - Software/Firmware Development - PCB Design - Usability Testing - Compliance Testing - Production Management We help clients develop new product opportunities, create intellectual property, and implement ideas through prototype, pilot, and production start-up. EEG offers complete hardware and software engineering services and commits to your total embedded solution through our network of consulting professionals specializing in industrial design, mechanical engineering, global compliance, and manufacturing. We have established relationships with professionals in all disciplines required to bring a new product to market. We offer full production services with our contract manufacturing partners through all project phases including prototype, pilot, and production.
Me: FW design in Verilog/SystemVerilog. Have also C++, perl skills. Electronics since 1978, HDL since 1998. Industry: ATE. Group: also analog design + SW development
I run a product design company here in dongguan china.Recently,I also have a factory doing manufacture,I have more than 15 years experience in both product development and manufacturing. we have so many skillful designers and professional engineers ,pcb engineers ,sourcing salesmen,QA,QE,QC. we concentrate on indutrial design ,electronics design ,pcb design ,prototype,tooling,injection ,diecast,punching,blow molding,assembly,etc.
I am here to assist you in making high tech decisions. I utilize my practical hands on knowledge working with high technology and high tech companies, to assist you with; acquisition, design, production, and manufacturing of high technology products and processes. I can research and digest the techno-jargon into manageable information you can use. I am here to bridge the gap between you The Decision Maker. and the people you need to convey your message to. I can help you get the information you need.
Technical skills and effective communication. The ability to satisfy the rigorous demands of engineering design and modelling combined with the management skills that keep projects flowing smoothly. Creative passion that takes a product from mere function to elegant utility. Hi, my name is Christian Brown, and if you're looking for Product Designs and CAD/CAM drafting/modelling, look no further. I began my engineering career in deformable optic design back in 2005, and have since worked with a variety companies, from a 14-person technical startup to an established subsidiary of a Fortune 500 company. My design work has spanned from small injection-molded case components to large steel manufacturing assemblies, but throughout I have applied my strong mechanical innovation and my passion for design excellence. For a partner who gives you great designs and clear communication, hire Kai by Design. You'll be glad you did.
Electronic Technologies Inc. is a company has been designing and implementing systems for nearly 20 years.
Mechanical Designer with 25 years experience /15 years with SolidWorks / in documentation, 3D modeling, mechanical design
6 year experience in design of any electric and electronics projects. Microcontroller, robotics,industrial. Design from scratch to best suit client needs and specfications.
1) BE in Electronics and Telecommunications 2) Diploma in Electronics and Telecommunications 3) CCNA 4) CCNP 5) Currently working with orient Technologies Pvt Ltd as a "Network Support Engineer"
work with micro controllers and electronics
I am an telecommunicatoin engineer with mayoring in electronics. My main areas of expertise are embedded systems (since 2007) and M2M wireless devices. I have worked with several architectures and manufacturers (8051, PIC, Atmel, PowerPC), covering different skills: electronic hardware design, PCB routing, software programming, prototyping...
Electrical Engineering Technician (BS EET, Purdue University) with 7 years experience designing circuit/PCB for Electromagnetic Valves, sensors and controllers for the shotpeening/ blast cleaning industry.
Have good knowledge and hands on Rich experience for more than 20 Years in Design and Development of Products and Solutions for the Electrical & Electronics Hardware Industry,, for both National and International Clients covering various verticals like Consumer, Industrial, and Defense. Customer requirements Study, Project Conceptualization, Engineering Specification, Design Development Plan, Timeline & Effort estimation, Electrical Design, PCB Design, Mechanical Design, Global Component Sourcing & Approval, First Article Build, Trial and Pilot Production, Reliability Testing, Safety Agency approvals (UL, CSA, CE.RoHS), Customer approval,Mass Production Planning ,Process design and Support. Design documentation, Production documentation. Product Test Plan Creation, Product Test report creation. Hands on Knowledge on Reliability Testing of Products for Electrical,Environmental Performance,Safety, Process in compliance with various International Standards on EMI/EMC,CE,UL & ISO
I am part of a group of industrial engineers and electronics engineers, with the vision to be part of your organization to help develop and carry out projects in manufacturing, design, among others.
Electronic Engineer. Experienced in analog and digital circuit design, PCB layout, serial interfaces and Windows desktop applications (C#/VB .NET).
M.tech in Power System Engineering (Electrical and Electronics) from National Institute of Technology, India. Good in Technical knowledge, Estimation (electrical buildings), Bill of Quantity, billing of site work, co-ordination Expereinced in working with Autocad, Mipower (power system based software), Matlab, Pspice Work Experience in Construction company for 3 years in Dubai Worked in Power plant as Assistant Engineer in India for 2 years Worked as Lecturer in Engineering college for 3 years in India. Good knowledge of SCADA system, Power system analysis, Transient analysis, steady state analysis, relay protection,stability,load flow analysis,short circuit analysis.
I am with freelancing for more than 2 years. I have worked in Odesk, so I think why not spread my talent more. I am expert in Admin Support, SEO and most importantly any Electronics based work as I am an Engineering student in ECE (Electronics & Communication).
I am an experienced Electronics Engineer and have been working in electronics organizations since eight years. I have been designing circuits from my early college days. Initially these circuits were amateurish but my designing gained maturity with experiences. I am always fascinated with electronics and its applications in industry.
Can draw electrical (system wiring, motors, etc.), electronic (PC board, and/or IC design), mechanical and structural (architectural) drawings.
Electropotent Infotech is one of leading company in Electronic and Automation field in Indian market offering innovative and easy-to use products for the growing needs for common household and industrial needs. These products are immensely used in all kinds of industries, corporate, hospitals, colleges, schools, residential apartments, builders and offices. Our company is committed to serve the industry by producing high precision and advanced technology products of global standards. Our uniqueness lives in anticipating the market needs in advance and developing products to meet those needs. Due to our continuous efforts for up gradation of quality and workmanship, we assure the best quality products, timely delivery and better after sales service We provide customized service to our customers to fulfill their needs with our experienced engineers, they export in this field and our company is growing with more energy and competitive in industry.
I have 18 years of experience designing everything from x-ray machines to telecom equipment to servers for AMD's customers. I've designed embedded systems for consumer and industrial devices. I Have a broad spectrum of experience that includes, product research, design and development, electronic circuit design; design, building and testing prototypes. Many consultant's primary approach is to merely make prototypes. My approach is to take the next step and design systems that are ready for manufacturing. I prefer to be a part of the team throughout the development process.
BSNL CERTIFIED OPTICAL FIBER ENGINEER A result oriented B.Tech graduate (Electronics and Communication) from university of Calicut possessing strong interpersonal relations and leadership capabilities and leveraging on the BSNL Certified OF Engineering course seeks opportunities amongst leading telecom companies to grow along with the company.
can perform all electronic/electrical designs including schematic / layout / programmable for digital / analog / rf designs
We offer consultancy services in the RF field (Antennas, Electronics, DSP...)
Broad experience in electronics design applications. Have provide outstanding expertise in major DOD contractors in projects with Huge Aircraft, Teledine Innet, Rockwell Int., Boeing, NASA Research Center, Lear Siegler Inc and few more. Cutting edge technology is where my professional skill and knowledge is been since over 30 years ago.
I am a graduate of Electrical/Electronic Engineering who has great passion to pursue and develop a professional career in a veritable and a forward-thinking Engineering company that encourages human ingenuity and innovation, using my strong practical, analytical and interpersonal skills to add value to the company's set goals.
My name is Chikwe Christian Uchenna. I am an organised and committed leader as well as a strong team player with a bachelor degree in electrical/electronic engineering as well as a certificate in BOSIET (Basic Offshore Safety Induction an Emergency Training). Over the years I have worked with N.A.O.C (Nigerian Agip Oil Company) Port Harcourt as an electrician (industrial attachment) and have also worked with GTB (Guarantee Trust Bank) as a technician (Relief) and some other posts in some private companies and I have advanced knowledge of industry standard and regulations.
A Mechatronic engineer who is technically savvy, versatile, adaptive to the work at hand and very much result oriented . Am the best you'll get for designs, technical drawing, electronic circuitry schematics and web designing.
I am an Electronics and Computers Engineering Student. I love to build projects in both Electronics and Computers. As an hobby I have build few projects recently
I am Electronic Engineer and scored 81% in B.tech. after B.tech, i started M.tech in ECE and now working on research work of my course in Cryptography of Images under digital image processing in MATLAB.
Hi! My name is Grigorios Chrysos and I received a B.Sc and M. Sc Electronic Engineer diploma from Technical University in Greece. My expertise is around the areas of reconfigurable computing (FPGA), the hardware implementation algorithms (FPGA, GPU) and implementation of embedded systems (microcontrollers, microprocessors). Also, I am an expert in Microsoft Office 2003 suite.
Electronic Engineer with experience in Computer vision using OpenCV and Matlab, Embeddes systems developement using Microcontrollers and FPGAs, Can write code in C/C++,Assembly, VHDL, Java, Ladder, PHP and more
I'm an electrical engineer with a broad skillset from years of experience in military and commercial robotics. I've taken dozens of electronics modules from concept to manufacture and written code for everything from firmware level data filtering to machine vision algorithms.
I'm the last 2 years to develop applications in MATLAB including GUI. Work as a system administrator firm with approximately 100 workstations. In my free time, i'm design and build various radio-electronic devices. Have knowledge of the following: Matlab, Delphi, network technology, electronics.
i am an electronic engineer with strong interest in electromagnetic and antenna design. I just graduated Last year my thesis work was about the use of metamaterials in the design of digital substrate integrated waveguide phase shifters for antenna arrays. this work included the design and simulation of metamaterial cells (CSRR), 90deg hybrids, transitions and a diode feed network, the the simulations result was validated with matlab array simulations, Within my relevant academic experience i became very fluent in Both HFSS and FEKO designing waveguide filters, patch antennas, yagi-uda arrays, pifa, and the numerical methods behind them EMC studies 3D modelling of electrically large structures its antenna systems (HF to Xband), the coupling between them, and the calculation of hazard zones for people, ammnunition, and fuel both according NAVSEA OP3565 and ICNIRP guidelines.
I am a Naval Engineer, I have three years of experience in production control, quality and maintenance of industrial plants as well as management tools for design and calculation. I'm willing to offers that are related to technology, naval and industrial sector, my experience allows me to develop assembly tasks, maintenance and operation of a production line in both sectors, and develop my skills in technical department and customer relations . Personally, my goals are the source of improvement and personal satisfaction; I define myself as a responsible, serious, initiatives and something very important to me, with many concerns that accompany my learning ability.
Hi, I'm a 16 year old student who is in full time education, I specialise in Electronics and Electronics Design I have A*'s In my GCSE's for Electronics and A's In my A Levels. In my spare time I usually play rugby or play video games. I'm the best for the job because I will meet any challenge head on, full with ideas and modifications for your any needs you may require.
HR5 Consulting, LLC We provide quality work, but unlike other providers, we guarantee our work, if you are not satisfied in any way, we will return your money, no questions asked, no hassle, and I mean it! Provider of Licensed (Arizona, USA) Professional Engineering Services. Owner and manager, John Hiett, holds a Master of Science & Bachelor of Science Degrees in Electrical Engineering -- Owner's Background and Experience -- Electronics, Electrical (High, Medium, & Low Voltage), Systems, Analysis, Software, Hardware, Forensics, Medical, Aeronautical, Aerospace, Robotics. Intellectual Property Analysis, Prior Art Searches, Patent Drawings Avionics: RTCA DO-160E, DO-254, DO-178, ARINC 744A-1 Hardware: Flight Deck Printing Systems (Honeywell/Boeing), Embedded Systems Software: RTOS VxWorks, C/C++, Basic, XML, HTML, Windows OS, Linux, MFC, Basic Project Management, Engineering Coordination
I am a freelancer based in Nairobi. I have good skills and experience in Computer Usage, Data Entry and Electronics.
Lamb Media Lab -- "Where Electronic Design and China Manufacturing come together"
HI.. I m virendra kumar soni . I m a electronic engineer. and I have also complete CCNA networking . and I have basic and advance knowledge of my field.
i am electronic and communication engineer graduated from kota university rajasthan and done my diploma in same stream from bangalore,
An Electronics and Communication Engineer profound in the discipline of Embedded Systems, Robotics, Programming of MCUs ,Circuit Building, Simulation and PCB designing. Presently working as a freelancer and exploring opportunities meanwhile.
I am greatly honoured to start my work with elance, its a great experience and i will try my level best that my skills will help the people with the requirements they offer, By profession, I am a hardworking engineering student pursuing my BS Electronics, I am excellent skills on programming and circuit making, as well as I am a good writer. Worked on Photoshop. I would say I am a researcher also. I hope that my skills will help the people a lot. Thank you so much for reading this !
good field experience in electrical and electronics domain
Hello! I recently graduated from MIT with a degree in Electrical Engineering. I now work as a circuit designer/EE at a large consumer electronics company. I'm looking for work to further hone my skills and have a challenge. I set my prices low because I don't really care about the money. Give me a challenge. For more details and portfolio, visit my website: nathanmonroe.com
I am an electronics engineer, having working knowledge of embedded designing using linux platform, device drivers and in the field of robotics(using microcontrollers AVR, 8051).
I am an Irish Engineer working as a Project Manager in Shenzhen, China. I have been based here since 2004. My expertize include prototyping, designing for manufacture, production line setup, scheduling, communication with suppliers and Clients from all over the world. I am highly proficient in Auto CAD and Solid works. I have contacts with over 100 trusted manufacturing and prototype suppliers in China, with the ability to do tooling for injection, metal fabrication, plastic injection, PCB fabrication and electronic assembly. I am highly experienced in bringing consumer electronic accessories to market, including headset, cases (fabric, plastic and silicone), cables and power adapters. I make myself available for calls at any time to ensure the best service for my clients
A highly dependable multifaceted professional in Electronics, Engineering, Audio editing and recording, Sound and Languages
Over 30 years experience working on electronics. Taught Advanced Electronics courses for the military. Technical writing, Course development. Familiar with Computer Aided Drafting (CAD). Interests: Robotics, Preparedness, Science, Problem solving.
I have done work in design, prototyping, testing, and repair of electronic imaging system equipment. I do coding to test circuit designs with assembly. I design and test altera based programmable logic. I am more detailed oriented in design. I am good at finding and repairing mechanical problems.
Interested in exploring freelance work with Elance. I have experience in digital electronic design and am currently taking coursework for MSCS.
Embedded device development primarily in automotive and industrial markets. Our project focus begins with sound engineering, and builds on software/firmware, hardware, and PCB layout skills. Experience: Embedded software, automotive, industrial, Microchip PIC, RTOS, I2C, SPI, UART, J1939 CAN, C/C++, Communications Protocols, Perl, User Interface design and implementation. FMEA, DVP&R, IEC 61508, SPICE. Our team draws their expertise from many years of experience in diverse controls development and automotive electronics for both production car and motorsports manufacturers. We will supply the knowledge and the drive to help you achieve your system's goals. We can work with you to create the next generation of your product or supply you with the hardware to get the job done.
Grew up in Switzerland, got a bachelor degree in electronics engineering at HTL Brugg-Windisch, worked two years for a manufacturer of railway security systems, then 14 years development of software for the police (command and control system, communication systems, database software, libraries, etc.) and management of the company network, servers, firewalls and more.
i am an electronics engineer. i completed my MSc. Electronics in 2009. having 5 year experience in the filed of PCB Designing. a hardworking professional looking to do more work in the filed of electronics as a free lance electronics engineer and designer.
Electronics engineering, Software Development and design services focused on providing unique products for the market. From prototype development to full production of systems, I can provide hardware and software engineering / reengineering services for new and existing projects. I have over twenty five years of experience in engineering, research and development in many industries: 3D digital cinema / Large format cinema Commercial and residential automation systems PLC/PAC controller integration Fiber-optic (MM/SM) long-haul A/V/Data communication Lighting system design and energy management Motion image sensing (digital camera) Bluetooth Audio system design A-10/X-10 Powerline communications Medical-electronics manufacturing systems Pharmaceutical manufacturing systems
I am currently working as a research assistant which includes the tasks like finite element simulations of the solder cracks in the power module using ANSYS. I have done my Master of Science in Micro and Nano Systems from Chemnitz University of Technology, Germany. I have completed my Bachelor of Engineering in the field of Electronics and Communication from India. I have work experience of nearly 2 years in the modeling, simulation and reliability of microsystems. In the master thesis, the fracture mechanics based study of interface cracks inside the power electronic module substrates have been performed using FEM simulation. In the research project work, my task was to design a stress-sensor chip in MEMS technology using 3D parametric modeling in ANSYS which also includes the thermo-mechanical and electrostatic analysis in order to measure this residual stress in-situ. Therefore, I have sound knowledge in dealing with ANSYS Classic and Workbench for FEM calculation.
Electronics engineer, mtech in VlSI Design
Electronics Design Engineer
hello my name is danish umer i am doing my engineering in field of electronics and telecommunication i can do the work in many fields like circuits design program a micro controller and computer aided drawing CAD
I am currently a third-year electrical engineering student with well-rounded academic background, coupled with a diverse working experience with embedded systems,power and control systems, circuit design, PCB design, engineering drawing and robotics. Over the years I have developed considerable skills in designing electrical/electronic circuits and simulations with Multisim, Proteus and LabView. I also have solid background in all advanced engineering mathematics, engineering sciences,programming and core electrical engineering subjects. Furthermore I have strong command over Microsoft Office Word, Excel, PowerPoint and Access, including Adobe photoshop. I am also a photographer and have knowledge of essential graphic designing. My endeavors are aimed at being innovative, resourceful and diligent to make contributions to the development of my employer and his company in meeting its goals and objectives.
i'm currently studying a master in electronics. I had worked as a retailer and office asistent manager.
I am an electronic designer with more 10 years of experience in the electronics field. I designed various electronic projects. - Embedded System (ARM Cortex-M3, PIC, DSP) - VLSI System (Altera, Xilinx) - PCB Design (Cadence Orcad, Altium Designer, Eagle) - Electronic simulations (Multisim, Proteus) - LabView - Matlab - Programming languages: C, C++, Assembly, VHDL, Verilog, VB.net - Siemens S7-1500 / S7-1200 - SCADA
matlab programming, data entry ,electronics ,Microsoft office ,Microsoft power point ,data writing.
Self-motivated with lots of experience in many aspects of electronics and Radio Frequency (RF). Prefer to do design work, but will also do repairs and upgrades on existing systems. Also capable to design and program PIC Micro and Atmel circuits. Currently working with SIM900 GSM modules.
i am a electronics engineer. i can do all design Data Entry, Microsoft Word, Microsoft Excel, Adobe Photoshop, Photo Editing, Arabic-English Translation, Children's Writing Copy, Editing English-Arabic, so have lot of experience so pls give some work
The ultimate reason of theoretical knowledge is to apply it practically for the service of mankind so I am a Bachelor of Electrical Engineering with specialization in electronics. Work experience in a software hardware development and simulation lab. Proficient in designing embedded systems and customized electronics solutions. The solutions may include using all types of sensors for development of a control system.
I am A Quick Learner and an B.Tech undergraduate(Electronics) who is goot at c/c#/c++ and wants to earn a lot of experience and hard worker!
CommonBee Technologies is a fast-growing Product Development and IT Services company providing full-spectrum development services to enterprises worldwide. We are a major technology innovator and global leader for services in the areas of New Product Conceptualization and Development, Re-engineering & Migration, Product QA & Testing, Product Implementation, Maintenance and Support. We have been engaged in the manufacturing and distribution of Electronic Components & Semiconductors with complete System Solutions for RFID systems, LED/ LCD Display, Automation & Control, Data Communications, System Integration, Security Solutions. Experience in managing business critical, complex and large-scale projects from project initiation to project completion. Working closely with clients to create project plans to identify key deliverables, monitor service level agreements and set achievable milestones that ensure projects are delivered on time and to budget.
Electronics Engineer, Native Spanish language 4 Years in Automation, Electrical Maintenance and contractor managing for a Brewery (Bottling Area) 2 Years as a Projects Engineer, managing and Developing Automation Projects and Field Support in Industrial Compressors. 2 Years as a Projects Engineer, developing, Testing, improving and reengineering Digital and Analog Electronics Circuits and PCB's.
Electronic design engineer with more than 26 years experience. Experienced in analogue and digital circuit design and development, embedded software development in C, C++, assembly language, for bare metal and Windows CE based systems.
We started our company in 1998 as a technical service provider supporting huge amount of electronics companies in China. All our team member got bachelor or master or PHD degree of EE, Automation, Control, Computer Science etc. at top universities in China.
I am final year Electrical Engineering student. I am well motivated and hardworking student. -I am well expert in all engineering related softwares. -I am working on Quad-Copter as a hobby, after its basic functioning I will (Insha Allah) add more features in it like object tracking/vehicle following etc. -My final year project is Generating Electricity from Algae (research project) its a new research field. -I am also working on a project in which children will allow to use computer or television(any electronics device) after physical exercise for specific time.Project's main objective is to return children to play grounds to do physical exercise which is very important for their mental and physical health. -In the end I would say I am very self-confident engineering student can do any task assign to me. So I will never disappoint you if u hire me to work for you. Thanks
I am a Graduate in Electronics and communication Engineering .I have 2 year industrial experience in VLSI systems, DFT, PCB Design. PCB Designing is my passion.
Engineering Associate with hands on experience in design and troubleshooting of analog, digital, and RF circuits. Knowledgeable with safely operating engineering laboratory equipment. Experience and training in teaching fundamentals of general use and safe practices of electronic equipment. Familiarity with Electrical and Mechanical Engineering design concepts and applications.
I am a professional embedded system developer with 10 years of experience in the industry. My mission is to achieve customer satisfaction and provide high quality deliveries. I am also fluent in English, and with the experience of working in multinational companies serving international customers for the last 8 years, will guarantee you with clear and effective communication.
Electronics Engineer with vast knowledge of electronics, mathematics, robotics, programming and ability to accomplish all requests in a timely manner with quality output
I am an electronics engineer. Experienced Designer and Engineer handling in: -UAS Autopilot, specifically with rotary wing air vehicles. -Analogue, digital, LED, GSM, GPS, IMU, 8/32-bit microcontrollers, embedded system and PCB design using CadSoft EAGLE. -Creative Freelance with skills in 2D drawing and 3D modeler using SolidWorks
I am an Electrical Engineer technician currently working in industry that recently started an alternative and renewable energy technology company. Although I'm new to the Elance community, I have 10 years experience with Web Design and Development, 8 years with Flash Website/Blog Design, and over 5 years professional experience (more specifically working with electronic circuit design, microprocessor/CPLD programming, prototyping, testing, CAD, Simulation, technical writing, and research).
I was working for 20 years in electronic device repair and 5 years in electronic circuit design .
I am an embedded systems designer with a focus on power electronics. I have wide experience with many types of embedded systems, real time operating systems, PCB design with Altium or Eagle, and real-world testing and debugging.
NOMZ Technologies Canada Inc. is a small engineering design and consulting firm established in Summer of 2009. We have worked with a small but satisfied list of clients on various electronics, mechanical, embedded systems and IT projects
My name is Leo and I work alone as freelancer on my company Carelle that is an electronic engineering agency that develops prototypes, schematics, and other developments in electronics, with experience in a variety of projects ranging from automotive and telemetry at the industrial level for major corporations to even microcontrollers and other such projects for individual clients. We carry over sixteen years of experience in the field and have had hundreds of satisfied clients in part due to our commitment ot excellence and cost-effective solutions.
I have 14+ years of experience in PCB design with 20+ years prior as a technician. I have extensive experience in these areas: - Complex shapes, high layer count, rigid & rigid/flex, complex vias - High density placement and routing - High speed digital, noise sensitive analog, power supplies - Signal integrity, controlled impedance, differential pairs, high power - EMI, thermal, power, timing - Ethernet, PCI, PCIe, SATA, DDR & other memory, USB, general bus structures - Mentor Graphics Expedition, Design Capture and DX Designer, libraries - Windows OS, UNIX/Linux, MS Office, AWK, networks
I am electrical engineer from RIT. i have worked for Ashly Audio for five years as test engineer dealing with DSP and general electronics. I worked for synaptics for a year as an analog mixed signal engineer dealing with integrated circuis. Now I currently work for ITT Gould Pumps in the R&D division as an electrical enginner.
I'm bio-physicist with experiences in computer programming and electronics.