I am an electronics graduate from Indian School of Mines, a premier engineering institute in India (class of 2014), i am currently pursuing my Masters in Computer Engineering at New York University, School of engineering starting Fall 2014. I have a good knowledge of analog as well as digital circuit design and microwave, wireless, and optical communications and devices apart from VLSI design and Embedded systems, i am also familiar with object oriented programming such as Python, and low level programming such as embedded C and Assembly language for ARM systems and X86 assembly. I am also well versed with RTL (VHDL) and layout of VLSI design, i have worked on LASI tools and CADENCE earlier. I have done coursework which required me to design a PCB using Altium. I also have adequate experience with MATLAB. I am looking for opportunities in Electrical and Electronics industry, with my diverse skill set i believe i can cope up to any challenges i face while on a project.
I own an Electronics / Microwave / RF laboratory with capabilities up to 22GHz. If you need something measured, debugged or designed, I'd be happy to help you!
I'm an electronics engineer with almost 2 years of experience in optical fiber designing and auto cad services.
We are a design company which can supply you one-stop service from PCB design,modeling,manufacturer, we will not charge you until you sanctified with our work!we are from Shenzhen China which is the biggest electronic products base in the world,here we have many partner factories which can help us turn your idea into reality soon!
a fresh graduate of electrical and electronics engineering, Dedicated and dynamic, seeking an entry level opportunity to work in the electrical/electronics department of an establishment.
Graduate in Electrical & Electronics Engineering
I am an Electronics & Tele-communication engineer having 5 years experience of design and development in embedded hardware and firmware. My expertise- Embedded C ARM and PIC controllers programming (8/16/32bit). Hardware Design Analog Electronics design I assure 100% quality work. Can complete project within deadline. I am new to Elance.com but worked on number of projects in past with excellent result.
Your business has a long list of important, high value projects it must accomplish. But when your internal leadership team is already overloaded with critical tasks, who can you turn to for project leadership that will get the job done? ThatÂs a question I often faced in a twenty-five year general management career that includes the presidency of two high tech capital equipment manufacturers, and itÂs why I started Alphecca Management Resources. Alphecca is dedicated to bringing its clients proactive, savvy project management that delivers superior results. IÂve got a track record of organizing and leading large complex projects, including the delivery of leading edge process technology to global customers, the design and launch of high technology products and services, and manufacturing cost reduction. My industry experience includes work in semiconductor fabrication and assembly, consumer electronics, precision optics, medical and wear coatings, photovoltaics, and related te
Just graduated from ITT-TECH with a 2 year degree for electronic engineering, before going to school I was Co Owner in Simons and Mcmenamy Tie Down Construction Comp where I would coordinate 3 different crews with scheduling, marketing, pricing, payroll, maintnence and repair of equipment and tools.
I have experience in designing of electronics analog and digital circuits.i have good debugging skills for electronics and electrical circuits and have done iv&v for c coding. Designed many small projects for the customer.
Individual worker, like to do hard projects, have interest in MATLAB,AUTOCAD and C++. Automation and control for power systems,design of electronic circuits,design of MV,LV,HV power systems (including small substations,generators,motors,transformers,layout and one line diagrams,lightning plans for residential areas).
Electronic and Computer Engineering with extensive Industry experience in real-time applications and embedded systems. ##################################### LinkedIn: uk.linkedin.com/in/pedrocaetanom/ ##################################### I will support you in your challenges from early Concept and system requirements to proof-of-concept all the way to advanced development.
Driven Electronics Engineer with a broad background in high tech research, development, commercialization, and value creation. A creative problem solver with strong initiative, and personal integrity. Confident with software and hardware projects.
I have 8 years of direct industrial experience in mechanical design, and strong supplementary experience in electrical and electronic systems as well as in fiber optics. I can manage the development of a product from its initial prototyping to its final production.
Hi, My name is Salo Alexey. I have a Bachelors in Physics,Nuclear electronics from Belarusian State University, in the Belarus. Listed below are my experience and skills. - Language : C, C++. - IDE : P-CAD, Altium Designer, IAR, Keil, Eclipse, Visual Studio. - OS: Linux, Windows. - VCS: Git, SVN; - UML
Worked in electrical utility company as as electronics and communication engineer, have good knowledge in remote meter reading, AMI,DMS,Smartgrid and SCADA can work for electronics,electrical,IT or communication clients. Good knowledge in matlab and micro controller based deisgns. Also well versed in Modbus, DLMS,IEC and DNP 3.0 protocols
We are dedicated to delivering innovation and service excellence to the global Electronics industry by adding value in the design, build, assembly. We have been serving customers in over 40 countries from various electronic industries, Over 70% of products are exported to America, Europe and other Asia Pacific countries. ALD PCB could meet almost all your PCB manufacturing needs,including Single-Sided PCB, PTH Double-Sided PCB,NPTH Double-Sided PCB, Aluminum PCB (AL PCB),High multilayer PCB (2~16 Layers), HDI PCB, heavy copper PCB,PCB design and PCB assembly as well. Such I am a partner in the team I would rather to make an interview for discussing more details about the project you posted here as soon as possible via skype (radhouane.aouni1) or this is my phone number : 00216 23 90 70 91.
Telecommunications Engineer with experience in development (.NET, C) and electronic design (PLD, FPGA)
Letsky Innovations. is a highly innovative think tank and an R&D company in business for over 9 years. We are involved in the development of mechanical and electronic devices for embedded applications used in research and/or industry. We really enjoy working on all different kinds of technical projects and pride ourselves on providing high quality work and meeting customer deadlines. We're capable of following strict requirements, or developing products from conceptualization. We will do what ever it takes for customer success.
I am ANKUR GUPTA. I have completed my Btech in ELECTRONICS & COMMUNICATION from ANAND ENGINEERING COLLEGE in 2013. I have completed my summer training in OFC KANPUR. here I deal with basic CNC and it's improvements. my final year project is "integrated Solar Power System". I have the interest in electronics and automation.
High quality Electrical @ Electronics Engineering. Installation and Troubleshooting. Advanced services around USA.
I'm a young, intuitive and creative person. Intelligent, currently studying FdSc Electrical & Electronic Engineering. Previously studied HNC Electrical & Electronic Engineering Grade - Distinction. Working as a Robotics Engineer. Good English speaking and writing.
We are Electrical Computer and Mechanical engineers from the University of Waterloo in Canada. With extensive experience from building products for companies like NVIDIA Blackberry Linamar among many others we can design and build quality products. From Schematic design to PCB layout, Mechanical design for prototyping and manufacturing, we have engineered a multitude of products. We are looking to apply our skills to make phenomenal products and are passionate to complete our tasks with the highest quality. Please contact us to discuss the details of the project so we can get started immediately.
I am a graduate with a B.TECH in Electronics Engineering, a self-made Embedded developer and board designer and proponent of the maker-movement culture. I've been developing embedded projects for the past 3 years with a life mission to continuously learn something new. Analytically, detail-oriented, creative problem solver with a drive for quality and innovation; I'm a nimble one-man engineer dedicated to seeking out and helping like-minded individuals that share a passion for building remarkable projects.
Techforest is private organization located in west India specialized for providing electronic product design service to Industries. We have glorious 2 years in the market and now we are expanding yourself to provide solution globally.
I am an electrical engineering consultant with 40 years experience in the design, application, and field support of electronic controls and test equipment. I have both a BSEE and MSEE and IÂm a registered professional engineer in Illinois with project management, teaching/industrial training, and technical writing experience. IÂm interested in consulting work in the N. IL and S. WI area. Or remote or telecommuting work anywhere in the US.
We are a technology company head quartered in India. We provide product engineering services in the field of electronics - embedded products. We have expertise in following technology areas: Processors: DSP, ARM, DM368, DM816x, DM814x, S3C2410, Micro controllers, CPLD, FPGA, AM335x Wired Interfaces: DDR2, DDR3, SATA, PCIe, HDMI, DVI, HD video, SD video, Ethernet, RS232, RS485 Wireless Interfaces: Wi-Fi, Bluetooth, Zigbee, RFID Power supplies: Linear regulators, Switching regulators PCB: Blind-buried via, multi layer board, impedance controlled boards Operating systems: Linux, Android, WinCE Languages: C, Embedded C, C# GUI: Visual Basic Manufacturing: Injection molding, 3D printing
Core competencies: Analog and Digital Electronic Circuits Firmware Development Schematic Design to PCB layout Electronic Test Equipment EDUCATION BS, Business Administration, University of Arizona, Tucson, AZ Earned 24 hours toward MS, Electrical Engineering, University of Arizona, Tucson, AZ TECHNICAL SKILLS Linux, Perl scripting VHDL, Verilog Pspice Mentor Modelsim MS Office
PhD degree in Electronic Engineering, Lecturer, Electrical and Electronic Dept., University of Technical & Education, HCM City, VietNam. 10 year experience in Electronic design, Microcontroler, FPGA, Embedded system programing.
I am a Mechatronics Engineer from Pakistan's No. 1 Public Sector University(UET Lahore). Being a Mechatronics Engineer I can perform tasks related to Mechanical, Electronics and Computer. I can do Programming, Data Entry, Advertisement Promotion, Problem Solving, AutoCAD Drawing, etc.
Being Mechatronics Engineer by profession i offer my expertise in Computer Aided Design(CAD) and electronics field.I employ my years of experience gained by designing and developing products in building clients idea from conceptual to actual final physical shape.
I am an existentialist person. Also an electronics engineer.
I have completed my undergraduate degree in Electrical Engineering from the University of Victoria and currently have 2+ years experience working in industry. I specialize in electronic design, embedded systems, and product development / prototyping. If you are in need of engineering work and don't want to pay an arm and a leg, you have come to the right place! I am always up for a challenge!
Extensive background in the field of computer and laptop, hardware maintenance. The possibility of a small electronic circuit design, (nutrition circles). The ability to modify electronic designs that suffer from malfunction after a certain time period.
I'm offering a solution to a problems in embedded systems, Schematics + PCB design + Firmware + Software More than 14 years software engineering experience, broad range of computer expertise. More then 7 years firmware development for different embedded systems. Core language skills C, C++, Java, Assembler for different architectures(x86, ARM, MIPS, AVR, C51), VHDL, Verilog; Computer architectures: ARM, MIPS, PowerPC, x86. Microcontrollers: PIC24, PIC32, AVR, C51; Protocols: - Modbus communication protocol ; - I2C, SPI; - Etherbet; - RS485. I have a large experience with digital & analog electronics for more than 20 years (PCB design, FPGA firmware, etc.) There is some examples of my FPGA designs. ARM Core (only Thumb) Â classic 5-stage pipeline with extensions for multi-cylce operations, 33 mhz on old APEX20K; DSP ADSP-218x, simple 3 - stage pipeline , 60 mhz on Cyclone III EP3C16Q240-8, 1 MAC + 2 memory operation per cycle;
The E in E-Cooling stands for Electronics, Electricity and Electric Motor. We provide magnetic field calculations, CAD and Consulting for Machine Dynamics, Vibrations and Acoustics. Work from our Office in Berlin or at cutomer's.
I am a competitive Electronics and Electrical engineer with diverse knowledge about mathematical equations and also software design.I am also a good and competitive researcher who always faces challenges head on.
I am an electronics & communication engineer working in Telecom company.
Hello, I am an Electronic Engineer with 10 years experience in board design. My exdperience include design with CPU's,Microcontrollers, Network Interfaces,Power Supplies,High speed boards . Also I am familiar with CE standards. Thanks, Ofer
Hardware design more than 8 years. Expert on circuit and PCB design. Excellent on PADS, Allegro, Altium Designer, etc Great skill on FPGA design. Great skill on Microcontroller design. Excellent on Embedded System design.
Expierence in opto-electronics, optical imaging, optical sensing and wireless sensor networks. Over 7 years of experience in micro-optical design using ray-tracing software (OSLO, ZEMAX). Lead several projects from problem identification with client to presentation of first prototype. Granted six US patents in optical design and optical communications.
I recently graduated with a Masters degree in Integrated Engineering; a degree which gave me a thorough grounding in the concepts linking mechanical and electrical design. I was awarded a bursary for my final project which I've since used to set up my company - Jamp Technology Ltd. My skills include Java/C++ programming and embedded design for microcontrollers. I also have an interest in MIDI devices for music, and this has taught me concepts such as Bluetooth, DSP and tactile control methods.
I graduated as an electronics technician at RCC in Toronto Canada in 1986 and since then I have worked designing and developing software for Microchip PIC, ATMEL and ultimately to Arduino. Since 1998, I worked and developed in languages such as PHP and PERL and have worked in database engine such as MYSQL and POSTGRES.I was leading several projects of web sites when I was working for over 8 years at lalupa.com I have managed servers (Linux) handling more than 80 clients per server, using control panels such as Webmin, Plesk and CPanel. During the past 5 years I worked at a school in which manage more than 6 servers (Windows 2003 and Linux Fedora) and a network of over 200 computers (windows xp and 7). I have developed software for school needs.I have designed in software like AUTOCAD, SOLID EDGE and PROTEL99 for PCB design.
I am an engineer electronics with 3 years of experience in the field of computer.
I am an Electronics Engineer with more than 3 years of experience. Highly Skilled in LabVIEW application development with Intuitive GUI. Developed LabVIEW applications for aerospace Projects. Projects have included automated testing, thermal vacuum chamber data logging and control, motion control, Image Sensor characterization, and Pixel data analysis. Apart From that I have worked on many Scientific Image sensors and Commercial Image sensors, I have designed Electronics Hardware for commercial products, Schematics and PCB Layout I am extremely committed to work once I will only offer if I am capable of doing the said task.
4 years experiences in Power electronic, HDI , High-speed digital circuit design, serial channel simulation&design(over 10Gbps), 3D electrical model establishing, EMC debug, ASIC package design, DDR3 layout. extensive experience in SI&PI design&simulation extensive experience in DFT, DFM,
Passionate about electronic circuit and pcb designing with excellent analog and digital experience in power and embedded systems. Have designed audio class B power amplifiers, embedded security systems wireless, and precision measuring systems and air conditioning controller pcb. Over 10 years experience. Pcb layout and prototyping Pcb assembly and prototyping Bom and parts sourcing.
I am a Mechatronic engineer which is concerned with the design of automated machines. It is strongly based on a combination of mechanical, electronics and software engineering, but is a distinctly different discipline to all three. I may help you with things related of this disciplines.
i have grip in total secorty servilance as camras wifi wireless devices and all electronics devices
We're a group of Electrical Engineers with expierience in embedded systems, electronic design, signal processing and network design.
I have been in the Electronics Industry for 34 years. During that time I spent 23 years in the Royal Air Force. I have been a Shift Manager, an Area Manager and a Contracts manager. I have worked as a Production engineer, a Test engineer, a Repair engineer, a Diagnostic engineer, a Debug Engineer, an ATE engineer, an Avionics Technician, a Lift Engineer, a Computer Programmer, in various languages, and a Technical Writer/ Author. I have experience on many differing types of electronic equipment from Thermal Imaging Cameras and Image processing to Air Radars. From Communications equipment, both land and air, to Aircraft Searchlight Equipment.
I have 2 years experience in Electronics design and automation. Made many projects and work on eagle designing software. Also have good experience in embedded application development(both hardware and software). Worked on RISC micro controllers.
I'm electrical engineer have excellent experience in electronics, PCB design, Embedded system and electrical shop-drawings on Autocad.
Mechatronics engineer with experience in the fields of electronics circuit design bot digital and analog ,micro-controller circuits design and programming
I have physics and electrical engineering background, specifically in electronics, numerical optimization and physical computing. I'm familiar with Arduino and couple fast prototyping skills, such as PCB design, 3D printing, CNC, and laser engraver.
Grade carrer in electronics engineering, dedicated to design and programming. Basic labor experience apart from independent development. Responsable, hardworking an dedicated. Specific knowledge in PIC microcontroller family, Arduino developments, MATLAB language and PCB design for general propouses. Labor expierence with PLC and general computer repair including Windows XP/7/8, Linux systems, home LANs, and hardware solutions. Extra knowledge includes Adobe Photoshop, Microsoft Office Suite, English/Spanish translations jobs and audio mixing/mastering.
I offer my experience as an Electronics Engineer who has many interests and experience in many areas outside Engineering as well, which I believe gives me an fresh view of both projects and life itself. I strive for the best for the client in order to reach a win-win relationship, which I believe is what can provide us with true fullfillment.
Over 25 years of experience designing Autopilots, Servo-Amplifiers, Switching Power Supplies, Custom Electronic Controllers, Custom Transformers and Inductors, and Custom Brushless DC Motors as well as performing Control Systems Analysis, MATLAB Simulink models, Motor Selection, EMI and Filter Analysis, and Electro-Magnetic Finite Element Analysis.
I have 10 years experience working in Aviation in the Reliability, Maintainability and Safety focus areas. I have experience in electrical systems, electronics, programming, and mechanical actuation.
I have more than 10 years experience in the field of fiber-optics sensing systems as well as analog electronics design. Large theoretical knowledge in the area of telecommunications, optical communication systems, optoelectronics and photonics. Special interest in analog and digital signal processing, low-noise wideband photodiode receivers, infrared wireless communication systems, laser rangefinders, and interferometry. Large experience in using software packages Cadence OrCAD, Altium Designer, MathWorks MATLAB, and Wolfram Research Mathematica.
I am an electronic engineer. And have many free time with job. So I hope to work with elance's friends.
As an electrical engineering graduate with five years experience in design electronics and a strong work ethic, I am looking at taking up some extra projects in my spare time to display a flair for quality and efficiency.
Jay has over 25 years of experience leading the development of consumer electronics and imaging products in Silicon Valley. As a founding member of Logitech's webcam product group, Jay helped to create and define webcams and video communication as consumer products. His experience includes key roles leading hardware, software, and program management teams through all stages of development from product conception and system design to manufacturing and retail launch.
I have more than 10 years of experience in Circuit design and repearing electronics devices.Microcontroller programming.
I've completed my graduation in Electronics & Telecommunication engg. with top honours & practical experience in PCB design & Embedded system design. I have in hands experience in PCB design, Micro controller & embedded system design and applications
Good expertise in fields of activity like Analog, Digital and PCB layout design, Electronic Component Management, Production Management, Quality Assurance, Manufacturing and Test. Practical experience in an ISO 9001, Belcore, UL and CSA environment (design, documentation management, fabrication and quality assurance). Certified - l'Ordre des ingÃ©nieurs du QuÃ©bec
Graduated MS in Materials Engineering with strong knowledge and multiple internships in electrochemistry experimentation and modeling. Results-oriented professional with strong research, teaming, communication and interpersonal skills seeking to join a U.S. manufacturing company.
I am an Electronic Engineer with Power station experience in Control and Instrumentation. I am currently working as a Energy Planner, using Plexos planning tool.
I'm a Student in a Faculty of Engineering 4th year Electronics and communication Dept. , owns good computer skills and pretty much interested in E-Commerce , online business , Marketing , Programming also i speak+ write English like native language.
I am working experience in electronic industrial for switching power supply. I working design test process and interested any job can make money ^__^
Electronics engg from M.A.J.U
Hi my name is Oleg and I am a handy man . Pretty much I repair everything but most of the time I spend on Iphones , Galaxy and laptop repair . I have soldering skills , replacing just the glass on iphones or galaxy phones , pretty much I will be in everything with little training . I consider myself somehow talented because I have done lots of repairs like cars , electronics , appliances etc . ...
I am always trying to make some new and different circuits and projects that will help us to make things easier and cheaper.I have worked in electronics projects such as electronic lock, Digital speedometer,Vending machine,virtual keyboard. I have designed all the circuits required for above projects and implemented successfully. I have also been working in Automobile electronics as I am developing automatic gear shifting mechanism. Hence I have sound knowledge of Automobile and can design power-train of certain vehicle. I am also applying for a patent. Thank you.
I have a Ph.D in biochemistry. My specialties are research and inventing in a wide variety of fields, including biochemistry, chemistry, biomedicine, HTML and microcontroller programming. More specifically, my research has included tissue transplantation, magnetic particle separation, DNA structure, chemical sensors, specialty polymers, ultrasonic bomb detection and others. I synthesized a unique glucose-sensing dye which I patented and sold. I've taught chemistry, physics, and biology in high school, and biochemistry in medical school. As a consultant I've worked with clients in the areas of chemistry and physics, and oversaw a major project for the Navy in electronic deterrents. I do scientific writing, including reports and proposals. I enjoy helping clients with their problems and guarantee complete confidentiality
have done bachelors in engineering in electronics and communication. i have also taken professional training in PLC programming and SCADA designing also quite interested in embedded system and micro controller programming.
Making autonomous vehicles, aiding bots, circuit designing and electronics are my hobbies. I've worked on UGV, Robotic Nurse and image processing. Since I'm not the only one with these skills here, I try to be the best.
I am a Test Equipment Development Engineer in TIMEX. I use to make hardware design and program microcontrollers which are used to electronically test the product. Since I have already the software that are used in hardware design, I can guaranty that I can finish the given project on time
I studied electronic and communication engineering
Over the last 2 years, I have developed Arduino based projects.I am working in a Electronics Hardware design lab. I also have some experience in the following areas: Raspberry pi, PCB-designing, Data entry.
Honarably discharge combat veteran: U.S. Army Airborne Infantryman, background in machining, gunsmithing, electronics, SolidWorks.
I am an electronic engineer with M.Sc. degree in in fields of Analog/Digital and RF IC design. During my M.Sc. education I have done many project individually or in groups. I was involved in designing a fully custom SAR ADC in CMOS technology using Cadence design tool which we did it as a team working. Also I designed an RF transceiver using Agielent ADS.I also did a project for modifying a sound signal produced by an audio source through using a FPGA board, HDL-designer and modelsim. My master thesis was modeling and simulation of RF crosstalk between tracks in Photonic IC chips, I did this modeling and simulations using ADS Momentum design tool. I also have several years of work experience in low level C programming for digital and embedded systems based on microcontrollers as well as Visual Basic programming and experience in testing and verification of electronic boards. All these jobs show my knowledge and experience to do HW/SW design and implementation.
Member of the research group D + Tec University Ibague, Colombia and Winner of the "sample electronics projects" and "Designing apps" University of Ibague.
I'm an electronics and automation engineer. I have experience with microcontrollers, embedded systems and digital design and verification.
Our team contains of highly qualified specialists. We deal with a wide variety of electronics appliances such as digital control systems, monitoring, web-controlled systems, etc. Our recently finished projects are: the monitoring system of the pipeline protective potential with data transfer via GSM; a control unit for the basin including a http-server.
A recent graduate looking to obtain an electrical engineering position involving application in digital/analog electronics, communication systems, or microprocessor-based systems.
Extensive knowledge and hands-on experience in Mechatronics and Electromechanical Systems. Outstanding interpersonal skills, and extensive commitment and passion in the field of engineering. Currently working full-time as a Mechatronics Applications Specialist, providing demonstration, training and support for Solidworks Electrical, Zuken E3 and Altium Designer in CAD Microsolutions Inc. Pursuing the CID+ certification while in this position. For Eu Jin, engineering is a passion and passion is not only limited to 9AM - 5PM through the full-time position. Outside working hours, he is also currently working on an entrepreneurship idea in introducing programming/robotics in pre-school education at Soapbox Robotics (http://soapboxrobotics.com/) alongside 2 engineers graduated from University of Toronto, with affiliations to Impact Centre, UofT. Please do not hesitate to contact me should you like to know more about my entrepreneurship: we are constantly looking for brilliant minds!
Consultant specializing in the following areas: FPGA design Embedded processor (micro controller) design PCB design Automotive subsystems (motor control, remote controls) System Design and development
I have 15+ years experience as an electrical engineer at NASA/Goddard Space Flight center. I started out as a RF test engineer and I am currently involved in Field Programmable Gate Arrays (FPGA) designs for Aerospace electronics.
Over 20 years experience in the high tech industry providing personalized support adapted to your specific needs to complete your project on time. With background in electronics, mechanical design and artistic sense your designs will shine with the best.
I am graduated in Electronics and Communication, and pursued course on GlobalNetworking Professionals, I owe to produce my best as per the clients requirements
Construction and repair different electronic and mechatronic devices,many first places on the contests and learning by doing 30 years of my life.Work in Germany automotive electronic service job,owner of Misterchip Co-manufacturing maschines and electric devices in Serbia,Zajecar.I have diplome for manufacturing electronic components.I have my own mechatronic lab for small dimension devices.
7+ years of experience as an Electronics Design Engineer with a M.S (Microelectronics) Degree.
Seeking for new chance to prove myself and emit my skills practically for the out world with a reputable company, in the field of Embedded system, electronics, control, communication or software development where my skills can be discovered, utilized and improved.
I am an electronics engineer, with experience on electronics design for the automotive and laser industries, and also on industrial automation. I have been working under corporate contract or as a freelancer
I am the owner of a Prototype Design facility specializing in electronic circuit board design integrated in a CNC design house. I have 3 axis CNC prototype capability. I can lay out your design using CAD programming and machine the final product.
I am an Electronic Engineer and I have 8 years experiences in PCB layout, Circuit Design and Firmware Programming for Microcontroller
Electronics engineer, good at programming in general, embedded systems and other skills.
-Electrical engineer since 2007 with master degree in "electrical system". - I realised project using LabView for automation systÃ¨m. - I realised MPPT program using SIMULINK dsPIC Blocset -Worked for 2 year as quality engineer with Remy Tunisia. -Now working as advisor with governoment since 2011. - good skill on using office, internet.
Since more than 20 years, I am designing electronic circuits and can offer you a wide range of electronic solutions. Surely I can not cope with any task, but I am not afraid to face new challenges, on the contrary.