Freelancers

Freelancers by Skills

701-800 of 5190 Professionals
Freelancers
Professional hardware and software

5 years of R&D experience in MNC. Have good knowledge in Hardware and embedded software design. specialist in power electronics circuit design and motor control software. have good exposure in PCB layout design.

Singapore, singapore, singapore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Certified Project Management Professional

I am a PMI's certified Project Management Professional with specialties in Medical Devices, Life Sciences, Semiconductor Equipments, Electronics, and Computers manufacturing industry. I am an expert in Manufacturing line planning, setup, startup, commissioning, and maintenance.

Singapore, Singapore, Singapore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Circuits and System Designer

Electronics Engineer with specialization in control systems plus 11 years experience with expertise in the following areas. (1) PCB Design using OrCAD, Eagle, PCAD and Altium. (2) C/C++ Code development for embedded processors from Microchip,Arduino,ARM, AVR, Atmel, TI. (3) Embedded system design and development involving FPGA from major vedors: Xilinx, Altera, Actel, Atmel (4) MATLAB analysis and complex system development. (5) PLC programming (6) RF Circuit design in ADS and system development. (7) Electromechanical systems development (8) Pneumatic and hydarulic Systems development. (9) Custom Transformer Design and sampling. I ensure customer satisfaction through extensive interaction during system development cycle.

Pakistan, federal, islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
best performance with lowest price

iam an electronics and communication engineer , have good expereiance in digital and analog electronic design , wireless system using zigbee solution

Egypt, mansoura, mansoura | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electrical engineer

Senior electrical engineer, BSEE with over 10 years of experience in analog and digital electronics R&D, medical electronics, embedded systems. PIC microcontrollers, Xilinx FPGA/CPLD VHDL/Verilog

United States, MA, Lincoln | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Engineer

I am eager to work.

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Self Taught Electrical Engineer

Electronics hobbyist for more than a decade. Currently at college earning a BSEE. My experience includes analog design, from audio to wideband, switching and high power circuitry.

United States, null, Beloit | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Power Engineering; Electronic

Master degree of Power Engineering

Serbia, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Inventor. Electronic. Mechanical Design, Prog. Dev

25 products designed that reached markets 46 products all together 9 pending patents. Long history with Maxim, TI, and Silabs components incorporated into designs.

United States, IL, Champaign | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Specialists in Electronic Design and Prototyping.

Design and development of embedded systems and instrumentation for dedicated applications.

Mexico, Baja California, Ensenada | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF and embedded applications designs

We are a small company specializing in Electronics and Embedded applications. We are: - Writing embedded software (uC, Windows Mobile, Linux) - Creating FPGA designs (Altera, Xilinx) - Developing RF designs (antennas, amplifiers, transceivers, codecs, modems) - Doing PCB tracing and electronic device prototyping - Providing technical documentation We have a workshop with all devices and materials needed for prototyping, measuring and testing e.g.: - Soldering equipment; - Oscilloscopes, analyzers, fidelity DC sources etc. - Echnoeless camera for RF measurments; - Atmel, Altera and Xilinx development tools. Our primary goals are working on complex hi-tech projects and establish long-term partnership.

Russia, null, NIzhny Novgorod | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics & RF Engineer, Wireless designs

Portfolio Wireless Radio Designs PCB layouts Antenna Designs, Antenna diversity, Dual Antennas 16bit/32bit Microcontroller based board designs RF Discrete radio designs, High power/low noise front ends. Low cost & low power designs to operate on battery. Instrinsic safety compliant radio design ? FM & ATEX. RF Synthesizers, Modulators/demodulators. Board level firmware development for drivers. TI & Atmel radios likeTI CC2500, TI CC2520, AT86RF231. FCC, ETSI, EMI/EMC compliant designs. Design for manufacturability, ICT & FFT, support for functional testers. Industrial & commercial designs High frequency designs for space and defence applications like RF synthesizers, modulators, LNA, PA, oscillators etc.. Requirement specifications from customer needs & Critical to Quality Analysis.

India, Karnataka, Bangalore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronic and robotics

my self a good expert in solving difficulty circuits and arduino programming

India, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Design Engineer

New to Elance but 4 decades in the industry. Specializing in analog systems that work trouble free. Pride in work produces enduring satisfaction.

Australia, Western Australia, Padbury | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineer with graphic design knowledge

Electronic engineer interested in researching and development of automation systems, control techniques avanced, power electronic and microprocessors programming. I can make spanish-english and english-spanish translations, HMI interfaces and aplications with Labview or WinCC. Circuit Simulation with Pspice, Proteus, Circuit Maker. Program Siemens (STEP7) o Schneider Electric (Concept 2.6) PLC. Also can program in several language like C++, assembler a bit HTML Jquery and python. In other categories I can do graphic design too, you can see my work at this link: http://edd2690.deviantart.com/ browsing the gallery.

Venezuela, Bol?var, Guayana | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Circuit Design

Y&W Engineering is a provider of electrical engineering design services. As Board Certified Professional Engineers, we can shorten your design cycles, enhance design quality and improve reliability. Let us help your team reduce the overall cost of designs in the competitive marketplace.

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Automation /Instrumentation Engineer

I am Indian nationality living in Brazil onbehalf of Permanent visa process. I have legal permit and work book here in Brazil. I am graduate of Electronics Engineering ,passed in 2006 . I have been working in offshore and onshore in automation,controls and Instrumentation field for the last six years. I have good experiences in different kinds of controls like ship main engine controls,navigation system,boiler controls ,Tank gauging system,automation software and other various systems in ships,FPSOS,flataforms.i have good experiences in working PLC/SCADA controls and calibration of field equipments etc.

Brazil, RJ, Macae | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Fluke IG Products Solution Provider

A very positive and strong young professional whose strengths are his will power and motivation.. Being an Electronics Engineer I have enough knowledge base that makes me a perfect choice for Packaging Industries & Instrumentations. Along with it being bold and confident has given me an additional ability to communicate well. That makes me able to compete in all businesses. Having a blend of Engineering and Managerial abilities, I'm a professional whose spark can make others perform great too. Strong interpersonal and communication skills along with problem solving ability. Ready to learn always and self-motivated.

Pakistan, Punjab, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
test and measurement solutions; electronics design

help you for realize your ideas

Russia, Ivanovskaya oblast / Ilinskiy raion, Ankovo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hard working, consistant, dedicated

Graduated electrical engineer, currently on master studies. Excellent knowledge in digital electronics, using VHDL, Matlab, programming microcontrollers (asm and C, msp430, pic, atmel) and analog electronics. Using Protel, Proteus and Orcad for PCB design. Also good knowledge of 3DSMax, Photoshop and Corel.

Serbia, null, Pancevo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical engineer designer,SolidWorks.AutoCAD

Professional Experience about 40 years Design of new products, drawings, cooperation with manufacturers, assembling of first models. Precision mechanics, electro-opto-mechanics, MEMS units, hermetical units with electronic cards, heat pipes, GPS, RF protection, 5 month experience of molded plastic details, 200 bars pneumatic training pistol. USA patents-3 pcs,USSA patents-3 pcs 1.Optical MEMS switch for 64X64 and 8X8 channels, 2 Head supports for scanning and operating a new head-growth, 3 Protective garages for a head growth scanning machine with weight 600 kg, 4. Power supply cases. 5.Tools for glue fixating lens and prisms 6.An expedition knapsack for transporting underwater movie-taking camera with accessories 7.Spectral polychromator on Rouland circle optical scheme 8.Laser range finder TRIZ knowledge partly

Israel, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
false

I have over 15 years? experience in engineering design and development within the Aerospace and Defence sector. I have written software which is now flying on Eurofigher Typhoon cockpit computers, I have designed power conversion hardware now flying in the Airbus A400M Atlas military transport, and have designed and delivered actuator and missile computer hardware which has flown in two prototype missile types during development firings. My skillset includes leadership of multidisciplinary teams, task package management against a programme and budget, life-cycle experience in electronic hardware design, development and proving. Electronic architecture design and decomposition, and systems performance analysis. I have a background in Systems Engineering and some structured systems and software development for military applications. I am a practical, yet analytical engineer, who enjoys problem solving, and my experience to date has equipped me with a professional, self-sufficient attitu

United Kingdom, Hertfordshire, Hitchin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical and Electronics Engineer

I am very highly motivated to succeed and to work in an efficient and organized manner. I enjoy challenges and using my knowledge and skills to come up with solutions to engineering problems.

Kenya, Rift Valley, Eldoret | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics/FPGA Design Engineer

Work background: ? Creating and implementation of a data processing algorithms ? Design of digital-to-analog and analog-to-digital high resolution systems ? Design of a power subsystems for a data acquisition systems ? Design of a power subsystems for FPGA-based computers ? Design of a synchronization subsystems for FPGA-based computers (650 MHz clock tree: PLL synthesizers, clock distribution ICs, topology recommendations) ? Design of a high-speed interfaces for FPGA (LVDS I/O, Rocket I/O, PCI Express) ? Creating of IP-cores for FPGA (verilog modules of PCI Express devices for Xilinx Virtex-5 FPGAs, DMA-controller module, elastic buffering modules, SPI modules, high-speed protocol physical and data link modules for Xilinx Virtex-5 and Virtex-6 FPGAs)

Russia, Rostov reg, Taganrog | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded System Designer

I want to improve my professional capabilities by challenging my talents in a world-class company at New Zealand. I had 8 years of variety professional experiences in Iran. My achievements were awesome except lack of world-class standards in non-technical aspects. I want to reach the summit as an international engineer. I am seeking for job in Auckland, Wellington and Canterbury, NZ.

New Zealand, auckland, Auckland | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical Engineer

Done Electrical Engineering. Having worked With C/C++, MATLAB, Visual basic,STM32/8051, Electronics, Power Electronics, Embedded Systems, Power Systems and Bio medical Electronics.Having 3 year Experience in the field of Electrical engineering.

Pakistan, PUNJAB, LAHORE | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in Digital Electronics

I'm a hardworking person. I have a great will to do personality. I lost my father in my childhood and my mother is an employee. My mother gives me the strength to work harder and harder everyday.

India, Andhra Pradesh, Warangal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineer

Recent grad with experience working with analog and digital components. Familiar with C,C++,C#, and assembly. I've worked with Zigbee wireless protocols and have some knowledge of control systems and DSP.

United States, WA, Bellingham | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

I am a seasoned Electrical Engineer, with core competencies relying in design, management and operations of Electrical/Computer systems and sub-systems. I have a strong knowledge of IT, electronics, embedded systems, digital design as well as numerous programming languages, from chip design to chip programming.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
ELECTRICAL AND ELECTRONIC ENGINEER

I Have completed BE/EEE

India, TAMILNADU, SALEM | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Printed Circuit Board Engineering and Desig

I am an expert in Electronics Design, Manufacturing and PCB Layout. A 34 year proffesional with an AS in Electronics with experience including, Design, Manufaturing Engineering, Process Engineering, Product Sales and Costing, Accounting and and quoting. Special expertise in circuit board Design, I am an IPC, Advanced Certified Interface Designer (CID+). I own and have a great deal of expertise with Mentor Graphics PADS, PADS Logic and DX Designer. I also am an expert using Altium and own a legal copy of that EDA Application. Available for telecommute or off site work.

United States, MI, Wakefield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Design Engineer

Experienced in analog and digital circuit design and firmware programming.

Canada, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
COMBINING MEDIA AND HARDWARE THE INNOVATIVE WAY

- studied Electrical Engineering and Computer Science in Media - thesis project involving FPGA technology - worked for a big german TV/radio station doing Event Engineering - got a scholarship from the State for project "idetic" involving Arduino - did several bigger electronic (media) projects (analog/digital/uC) - worked for Mambo Kurt building a modified electronic Yamaha organ - own electronic music home studio based on music machines - co-founded biotech laboratory equipment manufacturing company "HaereTec" - tinkering around with all kinds of technology all the time - ask for more if you're seriously interested or want to know if I'm suitable for that type of job you intend to use me for

Germany, Baden-W?rttemberg, Bad D?rrheim | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Passionate Python & Electronics Pro!

I'm an engineer with interest in Electronics and Computer Programming. I have done lots of Embedded system projects and also designed many Windows based applications. Contact me for more details or references!

India, Haryana, Faridbad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reliable & Cost Effective Solutions

with more than 15 years experience in analog and digital electronic designs,i can guarantee a reliable and professional solution.

Oman, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Very Senior PhD in Electronics and Corporate Mngtm

1.) Very Senior Designer and developer of sophisticated Telecommunication systems 2.) Experienced Resident Director for Companies to be found in Singapore, specialist in saving corporate and personal taxes 3.) Very experienced designer of high end security systems, specialist for Banks and Corporations to secure Networks. 4.) Worked for several Agencies in Network Security, developed unbreakable wireless encryption codes.

Singapore, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
engineer mechatronics and sensor technology

As an engineering company (M.Sc.) in the field of mechatronics sensor technology, we offer a variety of engineering services. Product development, planning and design of electronic, mechanical and mechatronic components you get with us as well as lighting design and consultation on technical issues. Look for references and what we offer to our online presence. we will call you back free of charge. www.efktr.de

Germany, Hessen, Wiesbaden | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Electronics Engineer

I have 10 years of experience in building embedded systems. During that period i was involved in different phases of developing final products including both hardware and software development. My skills comprise: - FPGA digital design and verification in VHDL/Verilog – Working mostly with Xilinx FPGAs i was using Xilinx ISE tools and Modelsim. - DSP design in Sysgen - Schematics and layout design with OrCAD tools. - C/C++ programming - Embedded linux, writing linux drivers.

Serbia, Serbia, Belgrade | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics expert

Looking to make things work for you effectively. Very skilled at handling anything involving electrical components

United States, VA, Hampton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronics hardware designer

I was proud when my clients are satisfied with my work

Indonesia, West Java, Bandung | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechatronics Engineer

Engineer of Mechatronics. Experience in mechanics,CAD (SolidWorks, SolidEdge), mechanical constructions, electronics design, sensors, actuators, C programming of microcontrollers, automatisation ( pneumatics and electropneumatics), programming PLCs ( Siemens TIA, Codesys). Experience with ABB industrial robots and ABBs RobotStudio. Other software packages: MatLab,C# Most of these skills are shown on a robot built to compete in the EUROBOT robotics competition.

Serbia, Serbia, Novi Sad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
From scratch to shelf, Your total Sourcing Partner

Sourcing in China it can be compared to squeeze the juice from a cactus: the result it can be tasty and sweet but difficult to reach. We are the partner that will remove all the thorns for you, one by one, giving an easy access to the pure juice, without punctures. As creators of world's acclaimed Open Source Hardware platforms like smARtMAKER Open System, based on our invention the smARtBUS Open I/O, with over 50 modules available and compatibility with multiple platforms including Atmel AVR (Arduino), Microchip (ChipKit), Cypress PSoC and Raspberry PI, Open System is the most extendible plug&play (doesn't require any soldering) platform for prototyping and small run production of electronic projects, we are the right partners for your next electronic product. Our international team include engineers from Europe and USA, including popular authors published by top editors.

Hong Kong SAR, PRC, HK, Hong Kong | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Circuit Designer

Over 25 years of circuit design experience. I can do almost any kind of circuit design; Digital, Analog or Memory. I have done Integrated Circuit Design and Board level circuit design.

United States, ID, Pocatello | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronics engineer, chemistry

Possession of programming skills of industrial equipment including banking such as bill acceptors, communication terminals. Knowledge of server systems family MS Windows, Linux. Experience and management database MySQL. Basic programming skills: HTML, XHTML. Knowledge of programming languages Delphi, Java (basic). Understanding and working with CMS (Joomla, magneto, Wordpress). Assembly and soldering of all radio components, including lead-free solder and soldering under a microscope. Management and adjustment of satellite communication systems. Diagnosis and repair of any low-current devices and PCs at an advanced level.

Russia, Omskaya oblast', Omsk | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

TSQ Electronics is a Swedish company with knowledge and experience in development of electronics and software. Our main areas of services are: Electronics design Programming Web design Repairing TSQ Electronics is located in Haninge, south of Stockholm.

Sweden, Haninge, Haninge | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electronics & Embedded Systems Engineer

Hi, I am an innovative engineer and problem solver, with a passion for innovation and technology. I have excellent attention to detail, communication and project management skills, allowing me to deliver high quality work on time and on budget. Please refer to my Linked profile for my skills and experience: http://www.linkedin.com/pub/lance-cohen/10/195/a71

Australia, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineer

Exposure to industry Extensive involvement in designing and implementation of projects Development of equipment for use in studio Product knowledge Identifying new ways of executing projects Cultivating relationships with other departments. The opportunity in completing my BTech and the experience of researching and delivering my thesis on a Matlab controlled shape detection robot has increased knowledge in terms of technological skills. Attention to detail and a passion for perfection ensure delivery of service excellence to clients. I am highly motivated, performance driven and passionate about learning and increasing my ability to make a difference.

South Africa, Kwa Zulu Natal, Durban | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert computer/electronic hardware technician

I Have About ten Years Experience in the field

Antigua And Barbuda, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Precision Electronics Design at Competitive Rates

VREF innovations, LLC. is an engineering freelance design and consulting firm that is more focused on providing you quality, professional design services than our balance sheet. Our motto is customers first and profit second! Our mission is to provide precision designs so that you can focus on your product.

United States, IL, Elgin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert in electronics

hi this is vijendra

India, delhi, delhi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
If you dream it, I can build it ...

Experience with: * Electronic Engineering * Camera's, Optics, Acoustics * LCD's * Digital recording technologies * Product design *Bluetooth 4.0 (BLE) for IOS and android *Embedded software development with IAR workbench Skills across various areas such as: * High speed digital design experience including FPGA and microcontroller * Design of analogue interfaces in communication environments * Mixed digital/analog design experience * Timing analysis * Board specification, schematic design and board manufacture experience Along with product design solutions across: * Product Verification and Validation * Product technical support * Product quality improvements and cost saving * Optical knowledge and image processing & recognition * Mechanical interface and design * Preparation of detailed schematic and component technical drawings * Analogue and digital circuit design and development * PCB level troubleshooting * LCD interface and panel design

Turkey, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced electronics hardware development eng.

Previously designed set top boxes, IPTV products. Was sole hardware engineer for a small UK set top box firm. Many 10s of thousands of board I developed sold to BBC in UK. Responsible for whole cycle from architecture to EMC and hand over to East European factory. Other experience includes smart TVs, raspberry pi add-ons, DVD recorders etc.

United Kingdom, London, London | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronics design engineer

i am a Electonics Design engineer ,having three experience in industry,invovled designing of high power amplifers, digital circuits ,microcontroller programming,power elecronics

India, ap, HYDERABAD | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronics, Labview, flowcode

senior testing engineer, labview programming,

China, shandong , qingdao | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Electronics and Software Professional

I am an engineering professional with experience in analog and digital circuit design, testing, and manufacturing. I am also experienced in software development for the web, desktop, and embedded systems. I am especially skilled at developing software and hardware for high reliability environments and the verification require to ensure continued operation in these environments. My software languages of choice are C#, Python, and Embedded C. I also use MATLAB extensively for simulation.

United States, PA, Erie | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Programmer and Electronic Engineer

Provides custumized solutions using programming and engineering skills.

Brazil, RS, Santa Maria | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF/Microwave electronics design firm

Electrical engineering firm specializing in circuit design and layout, with particular interest in wireless technologies. Our company has been around for two years and our technical team has more than five years of experience creating RF, microwave, and high speed digital boards. This team also has experience designing FPGA projects on Altera, Xilinx, and Actel FPGAs using VHDL.

United States, OH, Beavercreek | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Opencart, Ecommerce, Linux, Experienced SW Engin.

I have over 20 years of professional SW engineering experience, working for Fortune 500 companies like IBM, CSCO, HP, Freescale and Dell as well as smaller size companies, developing system software for Unix and Linux operating systems.My main area of expertise is in Bootstrapping the Linux kernel, Board Bring ups, as well as writing and developing Linux Kernel drivers for various devices. I also have extensive experience in uboot and modifying uboot code to achieve just about anything. My expertise also includes Linux Networking drivers and general Networking setup and configurations. One of my other passions is the setup and configuration of E commerce sites using a variety of E commerce platforms, including: OpenCart, OScommerce, and the Yahoo Store. I do have my very own successful E commerce website and am very familiar with HTML, CCS, PHP, MySQL and Apache webserver, Java, Perl, C++, C#.

United States, TX, Austin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Marco Bellomo for Cerkio srl

Hi we're Cerkio srl an electronic, electromechanic and mechanic company with solutions for you. www.cerkio-srl.com We produce electronic from 2000 for most important italians group We develop electronic solutions for your business, R&D office for new soltions. contact us to. -- mobile: +39 -- web: www.cerkio-srl.com

Italy, Italy, Bologna | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Microcontroller, Electronics, PCB designing

I am a talented and experienced Microcontroller Developer. I have good experience with Microcontroller and I have been working as a Microcontroller Developer for many years. I also design ciruict schematics & PCB layouts. I try for maximum compliance with IEEE standards, user safety. I am a hard worker and enjoy working at all critical conditions. If hired by you I will be responsible to complete the task within the stipulated time frame and with utmost confidence. Outsource me for your project and I promise to bring in the best output.

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hardware Software Developer and Designer

I want to develop myself working as an electronics and embedded system professional. With my team I have developed multiple products including environment-data, sensor interface, development boards, remotely controlled systems, etc. Besides, I'm trying to be top-grade web designer and programmer. I have designed and developed web sites using HTML, DHTML, PHP, MySQL, Javascript, etc. For the last four years, i have been training myself in all theses fields and looking forward to path widening opportunities.

Bangladesh, Dhaka, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
drafting cad mechanical electronic

I'm an experienced mechanical & electrical drafter. I specialize in 2D Autocad & 3D IronCAD renderings. My specialties include prints, drawings, models & diagrams of small mechanical parts & assemblies, design and fabrication of specialized antennas & related products & electrical diagrams.

United States, CA, Riverside | Engineering & Manufacturing | Rating 0.0 (0 reviews)
ELECTRONICS ELECTRICAL COMMUNICATION ENGINNER-EECE

Worked for Schneider Electric Distributor for one year leading a team of five members in following tasks: Project Design and Sales. Installation and Service. Worked for Crystal Control and Automation Company for last one year in the following tasks: Automation projects and Sales. Variable Frequency Drive Installation. (VFD). VFD Programming and Service. Worked with Buhler Group for Parakh agro industry as vfd service engineer.

India, MAHARASHTRA, MUMBAI | Engineering & Manufacturing | Rating 0.0 (0 reviews)
developing your moving world

Development of sensors and actuators - transducers, electronics and software; design, manufacturing and validation. Experts in miniaturization and integration.

United States, CA, Newport Beach | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer with broad knowledge base

I am a registered Professional Engineer in Virginia, with Bachelors Degrees in Biomedical and Electrical Engineering, and a Masters Degree in Electrical Engineering from Carnegie Mellon University. I have 5 years of professional experience with engineering design and analysis in the electrical power field. I can provide an independent review of all electrical engineering design documents that require Professional Engineer review in the state of Virginia. I can also provide design, design review, modeling/simulation, and analysis services for products, systems, or devices related to the following subject areas: - Electric Machinery - Rotating Machinery - Multi-domain Modeling and Simulation (Finite Time Difference and Finite Element Analysis) - Power Electronics (including gate drives) - Analog and Digital Signal Processing - Semiconductor Physics - Optical and Imaging Systems - Analog Circuit Design

United States, TN, Knoxville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PLC Programmer, Electrical/Electronics designer

I worked offshore industry for 6 years as an electrical officer. At present I am designing electrical for high rise buildings and programming PLC and SCADA for equipment controls.

Philippines, ncr, quezon city | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Consulting - Electronics and Audio

What we do: design, repair, testing, modification, and installation of electronic devices. Embedded systems design. Audio engineering. Pro-audio repair, specializing in Teac/Tascam and Marantz recorders, Amek console repair and recapping, Mackie "ribbon cable problem" permanent fix. Obsolete part sourcing. Tape head relapping. Media transfer.

United States, NJ, Asbury | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Design Engineer

Experienced design engineer and manager with over 20 years of experience, proven designs and product development in Medical Device industry

United States, CA, Yorba Linda | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Working Partner towards Analog Electronics

I am an ECE from the Philippines and at present designing several circuitry for a number of principals. I can be very useful to your cause giving you an edge in maximizing the cost and thus improving your profitability.

Philippines, Metro Manila, Mandaluyong | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Product manufacturing consultant

Whether you need help designing a product, creating a prototype, making AutoCAD drawings, finding suppliers and manufacturers, importing or exporting goods, building your eCommerce website, advertising, or distributing, I can help bring your idea to market.

United States, OR, Portland | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Confidence to Help

Eager to participate in designing, developing and building world class Hardware and Firmware in area like Instrumentation, Automation and Power Electronics.

India, Madhya Pradesh, Bhopal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Principal Electro-Optical System Scientist

Principal Electro-Optical System Design and Analysis Scientist with over thirty years experience. I design e-o systems ranging from small laser diode optics through to diffraction limited, and beyond, imaging optics for surveillance needs. I am expert at determining the back-scatter from aerosols in the atmosphere and from optical systems, such as cameras. I have optical design software and bespoke retro-reflection analysis programmes. I can program in BASIC and C. I am proficient in the use of MS Office, and the Apple equivalent. I use Mathematica for modelling algorithms and systems, including the optics. I can use 2D and 3D mechanical design software and I am proficient at electronic design, analogue and digital, such as photodiode front ends. I seek new challenges with my skills to enhance your profile and product range. I look forward to working with you.

United Kingdom, Hampshire, Southampton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
If you can define it, I can design it.

I can design your custom embedded electronics. Whether you want to control your house from your cell phone or just blink an LED, I can build what you need to accomplish your goal. I am well versed in analog electronics, microcontrollers, and embedded Linux boards. All design work is done using free software tools, so you can modify or extend your projects without paying for expensive software licenses.

United States, GA, Marietta | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert electronic and electrical design,web desig

studied Instrumentation and Control engineering at egerton university,certificate in statistical packages for social sciences,certificate in pascal,java ,c,c++,autocad and PLC

Kenya, eastern, karaba | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Circuit Design - PCB Designing - Microcontrollers

Have a MSc Diploma in Electrical Engineering, Department of Automatics and Control. Have a BSc Diploma in Image processing. Currently employed as a Senior Teaching Assistant at Faculty of Electrical Engineering (B&H). Expert in MATLAB. Solid knowledge in Electronics, Microcontrollers, Embedded Systems, Robotics, DSP. Excellent skills in C/C++ language. We have have worked on different series of MicroControllers ( PIC 18fxx2 series, 89c5x, AVR's). We also make a lot of drawings with AUTOCAD, PsPice & Multisim. Expertise in PCB Designing & Manufacturing. Fully expert in Integrated Circuit (IC) Designing. Chip Designing.

Pakistan, Punjab, Sadiqabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineer

Hard Working, Ready to accept challenges.

India, Rajasthan, Udaipur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
VP Global Manufacturing Maquiladora, China, EMEA

Experienced VP Global Manufacturing with 12 years on-site Maquiladora management (Reynosa, Mexico). Broad experience and expertise in lean manufacturing operations and global supply chain management. Was SVP responsible for manufacturing operations in the US, Mexico and China, including the closing of a plant in Seattle, Washington and relocating it to a new facility in Mexico. Responsible for relocating EMEA operations (Ulm, Germany) to China. Extensive electronics assembly experience, as well as metal fabrication / powder coat painting and injection molding. US Navy veteran with a BA in English (With Highest Distinction) from the University of Rhode Island.

United States, TX, Mission | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Transforming Great Ideas Into Reality

Impact Embedded is a product development consultancy with expertise in creating embedded systems and a passion for executing multidisciplinary technology development projects. We provide services to a variety of organizations, from start up companies working to bring their concepts to market, to large companies expanding their engineering teams to meet temporary spikes in demand, to solo inventors seeking to embody their ideas in real proof of concept prototype devices. While specializing in embedded systems hardware and firmware development, we find that electromechanical systems with integrated electronics, sensors, actuators, and functional packaging are the most interesting and challenging projects. Impact Embedded contributors have broad industry experience creating integrated devices in fields including robotics, medical devices, automotive, defense, and telecommunications. Further details and recommendations at: http://www.linkedin.com/in/dominicgermana/

United States, NC, Durham | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Electronic Engineer

We offer electronic engineering integral services based on the knowledge and experience acquired over 10 years working in several areas such as industrial, consumer electronics and automotive.

Spain, Barcelona, Masquefa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineer

....

Paraguay, Central, Asunci?n | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Creative, On-time Hardware and Software Solutions.

PhD : Signal Processing in Optical Remote Sensing 2013-2015 from UPC, Barcelona. MSc. : Communications Engineering - Digital Signal Processing 2008-2011 from Aalto University, Finland. B.E. : Electronics Engineering 2003-2007 from NUST, Pakistan. 04 years of work experience in : Microcontrollers, Matlab, C/C++, Signal Processing, Electronics Hardware Design and Testing.

Finland, Barcelona, Castelldefels | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Design

I can do well in this job for I am an Individual that can learn new things in a short period of time and very eager to apply my knowledge in the field of work I am into.

Philippines, Manila, Quezon City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert in Industrial Automation

Engineer in Electrical ,Electronic Industrial Automation Designing,Fault Diagnosis, in each field.

Sri Lanka, Sabaragamuwa, Rathnapura | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic engeneer

Electronic development, board design, PIC programming

Georgia, Tbilisi, Tbilisi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded electronics engineer

I worked in hardware desinging using Allegro PCB & SI,Cadence or ORCAD Capture. I have designed and tested PCBs. My role involves the following process, with the specs provided by the client we select the component, creating its library(this is done for all the components) and then final schematic is drawn and the pin-to-pin connectionsand the v oltages are given and verified and PCB is man.After reciept of the PCB bare board, we test it and send that for assembly and after that we do the functional testing to meet the required specifications.And forFPGA testing we load a one-to-one program using ISE10.1 vr and synthesis and simulate it through Modelsim. Finally we test the overall module before deliverd. I have done some projects using RF cards and also designed small RF cardsI am familiar with power supplies, oscilloscopes, function generator, Logic signal analyser, RF signal generator, pulse generator etc. and also has exposure on spectrum analyser,network analser.

United States, NY, BUFFALO | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Hardware Design + China Manufacturing

10 years of experience in consumer and industrial hardware development. Core expertise in mobile device accessories, sensors and power. Can act as general contractor and bring in resources in the US and Asia as needed for complex or high volume projects. Highly experienced in China manufacturing. I am based in New York City for those in the area.

United States, NY, New York | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded systems development

Solomon Systems, LLC, designs and manufactures electronic and electromechanical solutions for a variety of industry applications. We focus on motor control, sensors, transducers, embedded systems, controllers, RF design and power. We are able to provide designs, proto-types, small and large volume manufacturing.

United States, MA, Woburn | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Expert

Electrical and Computer Engineer with a Masters Degree in Electrical and Computer Engineering with 12 years experience with skills in ASIC RTL to GDSII, FPGA/ASIC Logic design and synthesis, ASIC/FPGA Design Verification, Board design/testing, Digital System Design, Embedded Systems. Experience includes Aerospace hardware design (Aware of DO-254 standards) Soft skills include Managerial Experience, Leadership skills. Six Sigma process knowledge. Specialties:Broad based knowledge in Hardware systems.

Canada, on, Milton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Middle lavel electronic desiner

Have no idea yet writing here.

Russia, Rostovskaya obl., Rostov-on-Don | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am an electronic and embedded design engineer.

From discrete devices to highly integrated circuits. From audio to RF frequencies. From micropower to high power switching... Organisation of schematic symbols. PCB footprints. 3D component models... Timescale. Cost. Possible obstacles. Lead times... Building test circuits and finished product examples... Bills of materials. Production line assembly documentation. Test and inspection routines...

Romania, Romania, Iasi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Design Software Programming Educator

Degree in MSEE. I has been working as an electrical engineer for over ten years. I would like to work with kids (including my 4-years old daughter) for practical engineering principles.

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Communication and Electronics Engineer

Looking for both personal and professional growth makes me capable of working in a challenging environment in a business company or organization in Telecommunication and networking field, maintenance, sales, fundraising or training where I can utilize my capabilities to advance in my career.

Saudi Arabia, single, Riyadh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
basic electronics

i'm willing to work to enhance my working skills..

Philippines, san martin de porres, para?aque city, para?aque city philippines | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Original Design Manufacturer (ODM), electronic ckt

ARSECO LABS, INC is an ODM (Original Design Manufacturer). We can either design and develop a schematic or deliver a final prototype. Please check our website: www.arsecolabs.com

United States, CA, La Crescenta | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Engineering Student

Insertarme en el mercado laboral como un profesional competente y vers?til, con aspiraciones a mejorar cada d?a capacit?ndome para obtener mayor eficiencia en mi desempe?o grupal e individual en el trabajo. // Be inserted into the market as a responsible and useful professional, with motivation to improve day by day all my skills and efficiency at work in group or individually

Argentina, Entre Rios, Paran? | Engineering & Manufacturing | Rating 0.0 (0 reviews)
The right person for your job.

Electronics technician and designer/drafter with varied experience from sales to product design. My current endeavor is building custom wooden furniture. This ranges from dressers to reptile enclosures. I have built small TV stands up to entire wall entertainment centers. I can work with all types of wood. I also do all my own design work. This includes a full set of drawings, including renders, before production begins. I also have knowledge of electronics, including some basic circuit design.

United States, FL, Pinellas Park | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Power Electronics and Embedded Systems Expert

Have Experience in developing SMPS, UPS and Inverters. Embedded Systems, Data loggers, Remote device monitoring and controlling.

India, A.P., Hyderabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronic design

16 years of hardware and firmware development for real-time embedded systems. Experience in the design of analog and digital circuits (uC, DSPs) and embedded programming in the field of automation (PLC) and Automotive. CADSTAR, SolidWORK, AutoCAD, C, C++, ASM.

Bulgaria, Plovdiv, Plovdiv | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Designer

-30 years experience designing microprocessor controls, test systems, RF, analog, digital and fiber optic systems - building jet engine controllers for US missle defense (www.smart-1.us) - Completed a propulsion system analysis for Light Rail system (Dallas Rapid Transit in 2012) - 5 US patents in fiber optics -Designs include bomb disposal robots (Code of Silence), Oilfield controls, Verizon FIOS test systems, fiber optic inspection, telecom testers, & much more

United States, TX, Dallas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Programming, Engineering (Control & Electronics)

Recently obtained a Master degree in Electrical Engineering. Have experience in programming, and generally working with computers, and also some in teaching. I am interested in projects which involve Embedded systems, FPGA (Verilog&VHDL), PLC, MATLAB, but also in C++ programming (Visual C++ or Qt). Proficient use of English.

Bosnia and Herzegovina, BiH, Sarajevo | Engineering & Manufacturing | Rating 0.0 (0 reviews)