I respond to design problems with creative and practical solutions. Enjoy learning for level up. Believe in hard work rewarding.
Bikway is an urban mobility start-up based in Copenhagen. Were offering an easy and affordable way to plan, test and implement biking infrastructure. We believe that cycling supports a lot of positive impact on the urban environment ranging from environmental to social and health benefits for both the individual and the society.
I excel at blending marketing, ergonomic, aesthetic, and mechanical considerations in product development. My 20+ years' experience providing market successful designs in the consumer electronics, medical instrument / disposable, fitness equipment industries allows me to provide creative and comprehensive design solutions for the most complex product development challenges.
Experienced in Industrial constuction. Mechanical Engineer with post graduation in Engineering Design
We are authorized distributors in Nigeria, Africa for BG Ignition parts for a wide range of engines, CRC Industrial products etc. We deliver on time! We are also distributors for desktop phones that works with any mobile network!
Construction Engineer with 2 years experience. Extensive background in concrete buildings. Certified Construction Engineer with solid experience from small to large residential projects. Results-oriented Construction Engineer specializing in civil, industrial and commercial projects. Demonstrated expertise in permitting and building code, seismic retrofitting and construction planning.
-Industrial Engineering graduate. -Knowledge in SAP SYSTEM -Microsoft excel expert
Extensive background in all phases of product development. Concept development, design, analysis, research, proposals, prototyping, value engineering, process development, fixtures, automation, and manufacturing support. Experienced in commercial, defense, industrial, scientific, and medical industries.
I posses an associates degree in architecture and almost 3 years experience in the production of construction documents. I've worked at one of the most prestigious architectural firms here in Belize for little over 2 year. I have been trained to design structures ranging from commercial to residential; even elements such as sea walls. Still, my passion exists in the designing of residential structures. Therefore, I specialize in the production of construction documents for residential buildings. On a side note I have always possessed and maintained a command over the English language.
Teaching engineering graphics courses (CAD: Technical Drawing, AutoCAD, CATIA V5, CATIA V5 Automation with VBA) and data processing (LibreOffice, Excel, VBA for Excel), and supporting of laboratories.
Mr. Suman Kota, an young Technopreneur, Post Graduate from NTU-Singapore, started Kota Corporation in the year 2008, to serve clients in initiating state of the art iconic projects. We Conglomerate technical, technological and business acumen to meet the present market needs and trends from creating trendsetting state of the art advice to Engineering and IT consultancy and from project management to complete coordination services. We are looking forward to creative, new or better ways to apply our expertise in all dimensions of our workmanship. We are set to the industry standard for client service. We are passionate about solving clients problems and exploring new avenues and opportunities with them. We are opted and chosen by the clients with our way of doing things: bringing complex to elegant simplicity issues, a unique approach, and focusing on innovative and sustainable solutions, helping clients to keep ahead in a world of transformation and globalisation.
Experiences in energy audit of industrial, commercial, office building and electric utility; technical evaluation of energy efficiency projects for TTEM (Technology Transfer for Energy Management) Program and DSM (Demand-Side Management) Program; Regular resource speaker in energy conservation technologies seminars. Experiences in planning preventive maintenance works, production control and management, maintenance, process and other engineering activities,
Experienced CAD Engineer offering over 8 years experience within construction & heavy industry: Labourer, machine operator, fabricator, engineer, draftsman. I can provide tailor made manufacturer drawings and 3D modeling of mechanical components and other objects.
Over (20) years experience designing gauges, fixtures, chuck jaws, forging dies and broaches using AuotCAD and Anvil Express in the appliance, agricultural, diesel engine, heavy duty truck and forging industries.
We are a small scale company, providing Engineering Support/Consultancy in CAD, FEA, Machine Design, Product Design. We are experienced in using Pro/E, CATIA, Solidworks, Ansys. We have experience in Industrial Products, New Product Development, Heat Exchangers, Material Handling Equipment, Medical Equipment. We have also served projects for CAD customization as per industry standards, suggest methodologies for CAD and Design Automation. We have also experience and expertise in implementing PLM windchill in industry and we are also comfortable working on client's PLM. Look forward to hearing from you.
I am a Mechanical Designer by trade, and a Mechanical Engineering Technologist by degree. I have always enjoyed designing and building a wide variety of things, from K'nex bridges and robots to tree houses when I was younger, to custom furniture and rebuilding motorcycles now. My day job involves designing custom blending and conveying equipment for the plastics processing industry. I also maintain the standard product line, as well as manage past job history. I am a part time freelancer, and am available to work evenings and weekends.
Electronics engineering, Software Development and design services focused on providing unique products for the market. From prototype development to full production of systems, I can provide hardware and software engineering / reengineering services for new and existing projects. I have over twenty five years of experience in engineering, research and development in many industries: 3D digital cinema / Large format cinema Commercial and residential automation systems PLC/PAC controller integration Fiber-optic (MM/SM) long-haul A/V/Data communication Lighting system design and energy management Motion image sensing (digital camera) Bluetooth Audio system design A-10/X-10 Powerline communications Medical-electronics manufacturing systems Pharmaceutical manufacturing systems
2 Years of combined research and industry experience in FPGA/ASIC Designing, verification and Full custom chip designing. Experience in using EDA tools.
Summary of Qualifications 15+ years of mechanical experience in automobile industry. Strong knowledge of quality and inspection issues relating to machined parts, sheet metal parts, engine components, body and interior car parts. Extensive knowledge of precision inspection and test equipment. Ability to establish goals, objectives to complete projects and deliver it in a timely manner. Strong presentation, planning, problem solving in a high stress situation, organizational, project management and decision-making skills. Multilingual: English/German/Spanish. International experience: Mexico, USA, Germany
Freelance Architect , trained in Architectural & Engineering Designs, preparing building designs & documents with considerable knowledge and skill in CAD applications and PhotoShop. My capacity of a single player are well recognised and awarded in national competitions as I am capable to provide the job with the best quality,speed , precision and knowledge presented trough architectural drawings and graphic design presentations. Specialised in the field of designing and developing projects for private, community,public buildings, industrial facilities, landscape planning, interior designing, Graphic design. with Ms in History of Architecture my design creativity spreads from the classic designs to contemporary designs of exteriors and interiors. 10 years of experience in furniture design and production as well as in civil designs of family buildings, condoes and multystory apartment buildings
Im offering a quick, efficient, and accurate solution to your 2D and 3D drafting needs. I can do everything from complex drafting, component development, FEA, Stress Analysis, Heat Transfer, Cost Analysis, Project Scheduling, and more. Coming from a background in Mechanical Engineering and Project Management in several different industries; I have the experience, knowledge, and connections that you'll need to help get any sized project off the ground. I have a passion for what I do, helping other people, and am dedicated to your cause until you are satisfied.
I have a broad understanding of design having created small to large assemblies for retail, commercial and industrial purposes. I have heavy experience in product asthetics being very artistic with a graphic design flare. I also have interests in photography having exhibited just recently in a large gallery in Denver and providing images to many magazines over the last 8 years. I currently am the Senior Mechanical Design Engineer overseeing my department from product research and development to prototype creation, analysis, testing and release for mass production. I work for a large Semi Conductor Company supplying robot and robotic interfaces to company's like Intel, AMD, Samsung, Western Digital and IBM. I am capable, creative and inventive. I have an entrepreneurial spirit and enjoy creating from all design aspects. I'm honest, listen well and get along with all types of people. I look forward to hearing from you.
Industrial Engineer, specialized in graphic design.
RAS Architects is an architectural firm based in Nagpur headed by Amit Raoot. RAS Architects provides Architectural & Interior Design Consultancy in the residential, industrial & commercial sectors. At RAS Architects we create spaces that are aesthetically pleasing, functional which suit the the client
I am a civil engineer with experience in the analysis of construction projects. In specialties such as electrical installations in medium and low voltage, plumbing and architectural design projects, civil and industrial.
Been in the Building Industry for Forty Nine (49) years where I was involved in Drafting and Construction. I am also a Structural Engineer for over Thirty (30) years.
A technically sound professional with over 6 years of diverse experience in the IT industry. Expertise include working in all the major cycles i.e. analysis, architecture design and implementation of software development. Hands-on expertise in J2EE, ASP.Net, PHP and GIS web application development. Committed team player with excellent communication and interpersonal skills. Seeking a position to utilize my technical & project management skills in the area of designing and implementing software products.
I am a Mechanical Engineer.I want to explore my carrier in the field of design sector.Also intend to work under pressure & challenges. Build my carrier with high proficiency,skillfull & energetic in the field of design sector. I am here to give my best quality work to the client. my portfolio & work samples are given below : https://sites.google.com/site/engrazizulislam/sample-work
A designer with aesthetic flair and a passion for detail at all technical levels. I like to produce items which become a thing of pride and joy to the user. My drive is to produce attainable pieces of art which can be used every day and be cherished for generations to come. Specialties: Ability to work quickly on any given brief producing designs which are well thought out and aesthetically pleasing. Conveying my designs clearly to the manufacturer and working closely with them in the production process. I am able to work on any project, using any material and to any degree of technical complexity. Although based in the Highlands of Scotland, I am both able and willing to work anywhere my unique set of skills are needed.
Mechanical Engineer having industrial experience.
An experienced and an individual administrative and mechanical/electrical engineering professional having more than 10 years of work experience in industry . With moderate computer skills and ablilty to create small programs to modificate or transform large quantity od datas.
12+ years experienced mechanical engineer into product development of various items in different industries. Uses auto-cad and Pro-E for designing and development. well versed in production methods, plastic moulding, sheet metal fabrication, stamping,developed machines for jewellery services - basic knowledge of electrical components and circuits. I have diversed portfolio - so will be sending sample works specific to the requirement while bidding with proposals. owned small sheet metal fabrication & machine manufacturing business at start in 2009.
Mechanical Design Draughtsman with 10 years experience in Solidworks 3D. Experience in the Research Environment, Development Environment, Biometrics Industry, Manufacturing Industry, and Transformer Industry. Available to start with one months notice. Willing to relocate for the right opportunity
* 12 years working within the High Tech manufacturing industry * 14 years extensive IT knowledge with Computer & Network systems * 10 years of Oil & Gas / Energy related projects * 10 years of Electrical and Mechanical design projects * 10 years of Digital Graphics work including photography * 6 years of Project Management * 5 years of HTML, PHP, Flash, and Java projects * 4 years of Sales and Marketing in technology * 5 years of Hardware Design related projects * 4 years of Hydrogen Fuel Cell & PEM System Research * 3 years within the Wireless Telecommunications industry
ENGINEERING DESIGN AND CAE SERVICES ATOAST provides multiphysics expertise that can help manufacturers, developers, and researchers solve complex problems involving computational mechanics, multiphysics modeling, engineered materials, systems, and application technology. Multiscale simulations for linking macro engineering to micro mechanics to nano mechanics for products engineered from atomic level is a key area of the company's expertise. ATOAST provides advanced engineering simulation, industrial technology, and research services in such areas as engineered materials, product, process, and system design. The company specializes in helping its clients accelerate product development and reduce costs through multiphysics optimization of product designs in such areas as acoustics, chemical, electromagnetics, flow, optical, structural, and thermal.
I am a mechanical/hydraulic Engineer that has been working in the industry for 10 years. Degree and experienced.
With over 11 years of of architecture and construction industry experience focusing on the implementation of technology and BIM related tools and processes in all facets of a project, I am available to assist your company with any of your BIM or visualization needs, for any size or any type of project. Throughout my career I have had the unique opportunity to have held management positions at two of the top 25 construction management firms in the country, leading BIM and VDC efforts for regional offices as well as positions within architectural firms and with private building owners for in-house construction and facility management. These opportunities have allowed me to experience the implementation of BIM from all sides of a project so I'm able to understand all stakeholders needs during the course of a project's life cycle; from the interview through the operations phase. Please feel free to contact me with any questions or inquiries. Thank you for your consideration.
Mechanical Engineer with +20 years of International and Domestic experience of the Engineering to Construction Phases (FEED to As-built stages of engineering, commissioning and start-up) in Oil and Gas industry. I
A Certified Engineering Technologist in Electronics with a strong background in Industrial Automation and system integration.
CURRICULUM VITAE PERSONAL INFORMATION SHAHID AMIN S/O MUHAMMAD ZAMEEN ADDRESS: VILLAGE AND POST OFFICE GAR MUNARA MAHALLA ISLAM ABAD DIST AND TEHSIL SWABI, KPK MOBILE # 0092332-9435280 00923425927736 EMAIL: SHAHID_AMIN1080@YAHOO.COM DATE OF BIRTH: 05/03/1989 NATIONALITY : PAKISTANI WORK EXPERIENCE/INTERNSHIPS: HEAVY INDUSTRIES TAXILA, from 02/07/2012 to 02/08/2012 as an internee at production branch. Oil and gas Development Company limited, from 13/08/2011 to 12/09/2011 as an internee at Mechanical Maintenance shop. FINAL YEAR PROJECT: Design and fabrication of wire electric discharge machine. SKILLS SUMMARY Soft skills such as PRO ENGINEER, ANSYS, MATLAB AutoCAD, Abacas, solid works. Also efficient in skills such as communication skills, presentation skills.
Mark is an independent furniture designer and craftsman. He builds high-end, limited production pieces in his wood studio in Frederick, Maryland, and licenses designs to manufacturers. He is an industrial designer with additional training in furniture design from the Royal Academy of Fine Art, Copenhagen, Denmark, and has refined his woodworking skills at the Center for Furniture Craftsmanship, in Rockport, Maine. Marks style is organic modern and is heavily influenced my both Scandinavian and Minimalist design traditions. He draws from his woodworking heritage which goes back six generations through his Scandinavian ancestors. Mark designs sustainable furniture and consumer products independently for U.S. and European manufacturers. He holds several U.S. and international patents. Mark has exhibited his designs in High Point, NC; World Market Center, Las Vegas; and The Royal Academy of Fine Art, Copenhagen, Denmark. Mark teaches classes and workshops on traditional wood
Design of pressure and vacuum vessels and associated piping and valves Fixture design for grinding, polishing and measurement of large optics. Tooling design for precision optical coating processes. Precision mechanism design, weldments, sheet metal, pressure vessel, piping, vacuum chamber, tooling design, robotic manipulators, master- slave manipulators, grippers and end effectors. Collaborative engineering design, design of flexures, Gough-Steward platforms Fluent with Solidworks 2011. Competent in Pro Engineer Wildfire 2.0. GD&T per ASME Y14.5M 1994 and broad familiarity with industry standards and military specifications. SPECIAL ACCOMPLISHMENTS: Design of numerous high precision optical testing fixtures. Design of tooling for installation of 5200 feet subsurface wet-oxidation pressure vessel. Design of a two DOF Master Slave Manipulator for the nuclear industry.
R&D of Products & Processes, Automation & Manufacturing Specialist Advanced Production Technologies. MS.ME. with proven track record of Interdisciplinary Engineering Excellence with more than 25 years of R&D & hands-on experience. Saving millions of USD to companies with innovative solutions to parts, products R&D, production design all the way from prototype to full mass production and more. Consulting to different industries Locally & Globally on High Tech/ Consumer & Industrial products, Batteries, Energy subjects & R&D. Industrialization, Designing, Building, Improving existing & new Mass production lines, Engineering Excellence, full commitment to projects, always giving more than expected, Get it done approach, Leading by example, learning & grasping fast new fields and subjects Helping companies reach their goals quickly, easily & most cost effective
I have more than 20 years of industrial electrical, instrumentation and controls design/engineering experiences.Strong working knowledge in applying U.S. and Canadian electrical codes, ISA, PIP, OSHA, IEEE, UL and CSA. Proficient in computer software programs including Adobe Acrobat, Microsofts Excel, Word, Access and Visual Basic V6.0. AutoCAD V12 - 2012, Microstation, and Promise E. I can develop all required electrical drawings for permitting and construction. I interfaced with trades personnel during planning, construction, and field start up. I can prepare material take-offs, installation specifications and conduit and cable lists and my own Visual Basic program that automates the creation of the above mentioned task saving time and minimizing errors. I developed MS Access databases for instrumentation linking to CAD P&ID's for ISA type datasheets, instrument calibration forms and multiple lists and reports. I am a self-directed individual, and extremely detailed oriented.
Impetus Design provides Product Development Services for the design and engineering of award winning Sporting Goods. My 18 years of product development experience gives me an excellent command of the entire development process from napkin sketch to production ready product. I have developed strategic partnerships both domestic and abroad working with manufactures for prototyping, production, and testing of products. I have worked with elite level Athletes and Teams to truly understand their passion for the products they race and win on. My experience and personable approach combined with my skills in Industrial Design, Engineering, and Graphic Design allow me to drive the development of your next award winning design. Impetus Design
IÂ´m a Product&Service designer who enjoys creating meaningful customer experiences exploiting market opportunities to launch innovative and successful products&services. I am specialized in user centered design and user experience research. I have been living in the Netherlands for almost 5 years working in different companies while studding the Ms Integrated Product Design in the Technical University of Delft. It will be always nice to collaborate with enthusiastic, open and creative people.
Ability to create effective design solutions in a fast paced environment. Initiated and completed capital machine and equipment design projects through all phases including building and testing to verify performance objectives. Produced complete drawing package for manufacture including detail, assembly, installation and modification drawings. Diverse manufacturing experience includes semiconductor, automotive, consumer products, aerospace, communications, nuclear, defense and energy industries.
Electrical Engineer working in renewable energy industry for the last 5yrs. PV system modeler, system debug, energy analysis. Over 12 yrs experience in semiconductors, device physics, statistical data analysis.
1] Design and Development : Embedded electronics , Digital and Analog electronics & Power Electronics from Product Ideas to Manufacturing and establishing the product for reliabilty in the field application in Industrial electronics, Railways , Renewable Energy 2] Products Deveoped : Industrail Controls System, PLC, A.C.Drives , D.C Drives , Grid Connected Inverters, Soft Starters etc. 3] Renewable Energy Field : Wind , Solar etc.
I have M.Sc in Computational mechanics of materials and structures. I have a strong theoretical background on computational aspects of Mechanics such as Material Modeling, Numerical Solutions, Finite Element Method (FEM) and Materials Science. I have several years of experience in Finite Element Analysis (FEA). I am expert in Performing static, modal and buckling analysis Analytical calculation and validation for fasteners Optimization and validation of Design Result evaluation Writing short and detailed stress report I got valuable experience of using following FE packages PATRAN/NASTRAN, ABAQUS ANSYS HYPERMESH SOLIDWORKS by working on different projects in university of Stuttgart Germany and Airbus Germany. In addition I also have industrial experience of working with AutoCAD and Solid edge.
¿CCS¿ is a firm, which Renders Consulting work of various Civil and Mechanical Projects with Design and Solution on CAD products/software. CCS had started its operation in the year 1999 as the first CAD Solution firm under one roof. Offering its service not only in CAD but also in various other fields like Engineering Services. Engineering services include Designing, Solution and 3D Modeling of Equipments, Piping Design, Parts and Assembly with prototype, Industrial Engineering with Space Management in all standard followed by Indian and Overseas Industrial need. CCS maintains the superior standards in Design, Presentation and Solution along with the latest software of CAD.
Quality Management Systems.9000 (QMS.9000) is a leading Management, Industrial Engineering and IT Consulting Company in the region. Our area of operations includes Management Development and Implementations of International Standards, Management Solutions, Trainings and Auditing Services to various organizations in the fields of Organizational Development (OD), Quality Management, Environment Management, Occupational Safety, Information Security, Business Continuity, Buyers Compliance, Lean Management, Laboratory Management, Social and Security Management. More on www.qmsiso.com
I have been using AutoCAD for 10 years. I was trained through a program led by industry professionals of the highest degree and have used that degree to pursue experiences in civil engineering and surveying as well as corrosion consultant engineering. I am an independent woodworker/craftsman using my passion for creating and my devotion to integrity to build anything from jewelry boxes and picture frames to patio decks and stone fountains.
We are a professional mechanical design and fabrication machine shop offering a wide variety of services and specializing in custom design. With an educational foundation in tool and die and mechanical engineering design as well as professional experience in toolmaking/machining and mechanical equipment design, we can help with: Industrial equipment design-build: Automation of electric, hydraulic and/or pneumatic systems Tooling Molds and dies Jigs and fixtures Prototype fabrication Obsolete part replacement 3D Part and Assembly Design 2D Mechanical Drawings Any other custom machining or design needs
An enthusiastic graduate electrical engineer, eager to take on challenges in the electro-mechanical applications and to utilize my knowledge and experience in Electrical/Electronic sectors in highly demanding vast progressing heavy industries. A recognized needs for applying professional skills to attain good customer feedback and the ability to communicate effectively at all levels. My studies have equipped me with the tools I need to design, manufacture, and the technical ability to overcome problems and challenges successfully.
Commercial/Residential Interior Design, Custom Millwork Engineering/Design/Drafting. Project Management and estimating services in the millwork industry. I have spent my career learning how to build, design, and create in the woodworking industry. Focused on quality, innovation, and accuracy. Value Engineering, Design Intent/Development.
3.5 years experience working as a Mechanical Engineer for a leading medical device company. This included Solidworks and Inventor CAD modelling and designing of industrial machines for waste disposal, wash and air drying systems, reliability upgrades. Due to finish my Mechanical Engineering degree (Swinburne University of Technology) in July 2013. Greatly enjoy CAD modelling with Solidworks and Inventor, have also had some experience with Pro.E (V4).
Many years experience designing anything from the simplest right through to the latest PCIe high speed hardware. PCB's form simple two layer to 40 layers. High speed, multi-gigabit design including signal integrity simulation. Specialties: Experienced PCB designer using Altium Designer (AD10), Cadence Allegro and DxDesigner/PADS. PCIe 3.0 interfaces and switching. Atmel AVR, megaAVR, ARM-CortexA8, ARM-Cortex-M, ARM9 and PowerPC based designs Analog interfacing and analog circuit design Small high frequency SMPS design Optical sensors including CDD, CMOS, SiPM or APD for detection or imaging. Power supply up to 100kW 200kHz 150kV Hobby/Education robotics controllers LED control systems CPLD & FPGA, - Xilinx or Altera including NIOS-II processor including power management
My name is Huseyin Ulku. I'm highly skilled professional engineer-designer from Turkey. I have 7 years of experience in Chemical Industry, designing manufacturing equipments, pipe systems and drawing P&ID.
I have 10 years of multiple experience in Digital Photogrammetric, Lidargrammetric, GIS Mapping, and Analyzing (Geo spatial data). Also specialized in integrating photogrammetric and geo spatial methodologies and data. My other skills are Graphic design and data entry works. I promise to provide satisfactory final products, with lowest time period as well as lowest budget. My sincere efforts would be to work with the industries/Organization of national or international reputations. And would be helpfull in planning, co-ordinating, executing and delivering tasks in an economic way in connection to my experience.
1: Majors:Solidworks, Statics, Dynamic, Engineering Analysis, Mechanics of Materials, Fluid Mechanics, Dynamics of Machinery, Industrial Process, Engineering Drawing, Mechanical Vibration, Heat and mass Transfer, Automotive engineering. 2: Internship with ford Geelong, worked on T models suspenion system, Designed an upright for McPherson suspension system that is capable of holding force and pressure from different driving conditions and is still affordable
We are a dedicated team of experienced engineers and desingers offering CAD/CAE, product design & development, industrial design, photo realistic rendering and interior design services. CAD/design software : Solidworks Catia v5 Rhinoceros skecthup V-Ray 3dsMax CAE software : Abaqus MSC Nastran; Patran Altiair Hyperworks LMS Virtual.Lab CAE service offered : FE modeling and meshing Linear Static Nonlinear Static Dynamic Analysis Thermal Analysis Multibody Dynamics NVH & Acoustic Analysis CAE Specialized analysis : -Nonlinear structural analysis with contact,large deformation, plasticity and material nonlinearity. - fatigue analysis ( stress based, strain based, welding) - Impact analysis - NVH & Acoustics(BEM,FEM,Vibroacoustic,aeroacousic and thermoacoustic)
I am BE pulp & Paper and ME Chemical Engineering (Specialization in Industrial Pollution Abatement) from University of Roorkee (Presently IIT Roorkee) I had worked in National Environmental Engineering Research Institute, Nagpur. I have a experience of designing and tender preparation for the projects of waste water treatment and canal systems. I have a exposure of Civil construction works. Presently I am Assistant Professor in IITM, Kanpur, Here my subjects for teaching are: 1. Water Supply Engineering 2. Water and Waste water Treatment 3. Irrigation Engineering 4. EIA and Industrial management for Industries
I endeavor to bring my experience to the company in order to reduce downtime, save the company time and money, and find unique solutions to uncommon business hurdles. Specialties: Industrial Automation Barcoding Print and apply Fixed mount barcode scanning RFID Custom software design Custom solution design label generation software 3D CAD design Solidworks
Process engineer with several years of experience in the petroleum refining and chemical manufacturing industries. Most recently, I have specialized in overpressure protection documentation and analysis to meet the standards set by OSHA in the National Emphasis Programs. I have a track record of assisting facilities to operate in a safe, socially responsible, and reliable manner. In addition, I possess proven leadership capabilities; coordinating and mentoring many engineers at once to complete quality projects on time and within budget.
I am a retired Mechanical Engineering graduate and served manufacturing industries for 30 yrs and may last held designation was General manager of an engineering company
I am a Mechanical Engineer during the day.I have been for the past 6 years. I have the history of being a Mechanical Designer/drafter for 12 years prior to getting my degree. All total, I have more than 18 years of mechanical design experience. I have worked in a multitude of areas including medical devices and industrial manufacturing. My experiences are in sheet metal, plastic injection molding, powered metals, casting, machining, manufacturing, stamping, deep drawn design and drafting standards for all the above.
Tim is a mechanical engineer with over a decade of experience developing and launching products. His experience in product development ranges from low-tech sheet metal and auto industry to high-tech Solar and LED. Dozens of entrepreneurs and companies have happily utilized his understanding of bringing a product to market and relentless tenacity to see the project successful.
Eng.B.R.O.Fernando, GFH,DFH(Lond).FIET(Lond),Fie(SL),C.Eng,FInstSMM(UK) Iam a Chartered Electrical Engineerand Fellow of both Engineering Institutions inUK and Sri Lanka and Fellow of the UK Institute of Sales &Marketing Management I have 45 years experience in industry and served the Ceylon Electricity Board for 22 years and held Class1 positions as Area Engineer,Rural Electrification Engineer, Divisional Manager,Station Manager Diesel PoweStation(80MW),and Project Manager Steam Plant Rehabilitation Project(50MW) Worked at Nchanga Consolidated Copper Mines in Zambia as Project Manager Underground Mines and Electrical Sectional Engineer Open Pits.From 1990 to 1996 served as Principal Power Engineer&later as Assistant General Manager Fiji Electricity Authority..Back in Sri Lanka in 1997 was Power Sector Advisor to the Board of Investment Sri Lanka and in 1999 was the National Y2K Coordinator at The Council for Information Technology, In 2005 was Vice Chairman Ceylon Electricity Board.
Musa Aaron Esekhagbona is a corporate member of the Nigerian Society of Engineers and he is a COREN registered Engineer. Since graduation, he has gained considerable experience in the Telecommunication , Oil & Gas, Construction, and Consultancy industry. These experience includes the design and supervision of platform, roads, bridges, multi-storey buildings, transmission and telecommunication line tower structures, water retaining structures, borehole drilling, water supply schemes, environmental protection works, environmental impact assessment, soil and foundation engineering works as well as flood and erosion control works. He has also been involved in the preparation of project cost estimation, preparation of contract and Bid document, and evaluation of tender. He has been in the teaching profession in one of our major university in Nigeria and he is Computer literate and has working knowledge of the major civil, structural, drafting, and project management packages.
Having 13+ Years of experience in product design, Tool design and prototype manufacturing services for Industrial, consumer, power generation products. Our KPIs are Quality, responsiveness and Ontime Delivery. Modeling expertise in Pro E, Solidworks and Catia Automation expertise in Pro E and Auto CAD Expertise in using six sigma tools, Experience execute projects in DFSS and DMAIC Expertise in application of GD & T Good application knowledge of various High temperature steels, Aluminum alloys for consumer and Aero applications, Special plastics and composite materials
I can provide Mechanical Engineering Sevices, Industrial Design Services and Cad conversion. I can provide the best photoRealistic render and throug-walk. and i have experience in seo and emarketing (:
I have substantial experience in the agriculture, industrial and mining areas, producing solutions to the challenges presented through many years of my career.
Hello, I am a 26 years old Mechanical engineer from India. EDUCATION: B-tech in Mechanical engineering. EXPERIENCE: 1) Comprehensive experience in Air pollution control system & equipments. 2) Skilled in 2d to 3d model developments. 3) Experienced in industrial duct detailing. 4) Determine and meet specific client needs to meet business and financial goals. CONTACT INFO: Email : email@example.com Skype: abhijit352 Mob. no: +919674393999
I have worked with Solidworks, AutoCAD, and Mastercam X5. My recent experience in 3D modeling/drafting is Oil & Gas Industry, particularly in directional drilling tools. I have created numerous 2D blueprints for mechanical manufacturing and utility industry. I have worked with a mechanical engineer to help generate solid models of concept downhole drilling tools. I am skilled in creating comprehensible blueprints, providing clear views and required notations. I am open to technical and artistic projects.
A highly skilled and qualified engineer, with over five years experience in the renewable energy industry. Has recently completed a M.Sc. Renewable Energy Systems, which has a strong focus on design and development. Excellent technical and analytical capacity to critically evaluate problems and propose innovative cost effective solutions. Enthusiastic, flexible and possesses a proactive approach to work. Results-driven achiever with exemplary planning and organizational skills, along with a high degree of detail orientation. Highly proficient IT user, who possesses the ability to use a wide range of in house programmes. Now seeking new opportunities for work for immediate start to utilize skills and experience to the fullest
To obtain a position to utilize my 20 plus years of experience as a Controls Engineer in the machine control and manufacturing industry.
An accomplished and seasoned Design and Production Engineer with 18 years in design, drafting and detail for manufacturing components, tooling, fixtures and custom built machinery. Solid track record for anticipating consequences of new designs, initiating solutions, and completing projects to specification with time and budget. Also known for project managing complex design development for Piping, Minining and Manufacturing industries and reputed for solving the most difficult engineering design problems. A sincere and well respected team player who interacts well with diverse personalities, also fluent in English, Bosnian and German. Piping Ducting Smelting Furnaces Industrial Boilers Cooling Water Systems Conveyors Platforms Stairs Beamlines Chemical Processing Wind Turbines Crushers Compressors Stairs Piston rods Hatches X-Ray Detectors Aluminium Cast & Steel Pistons Silos
To provide drafting and technical services to the Civil/Structural Engineering, Mining, Infrastructure and the Construction and Building Industries through the use of fully licenced AutoCAD, Microstation and other appropriate Cad systems as well as 30 years design and construction experience.
ABKAD CONSTRUCTION WORLD LIMITED (ACWL) is a construction company in the heart of Africa, Lagos, Nigeria, registered and incorporated under the COMPANIES AND ALLIED MATTERS ACT 1990 and licensed to provide services in the Telecommunication, Building and Construction sectors of the economy. At ACWL, we are determined to provide a world class construction services to cater for our various clients need, that is why our clients come first in our dealings, uniqueness and greater values are attached to them.
Machine Design Engineer Highly motivated and experienced candidate with expert proficiency in overseeing the design and construction of custom machinery for a wide range of industrial purposes. Strong experience in design, fabrication, and short/long run production tooling with a focus on automation. Well versed in the successful execution of on-site technical management responsibilities. Comprehensive understanding of the skills needed to coordinate communications between colleagues, customers, and corporate management to achieve project and production milestones. Regarded for the ability to deliver outstanding results with the highest degree of service and professionalism.
I hold a Diploma in Electrical Engineering.Having Put up 12+years of Experience.In design - Residential and industrial and process control.Thorough knowledge of computer skills and internet.Good English communication - Read and write ability.
Working in a company right after the graduation is like a dream come true.My dreams came true when i got placed in Southern Petrochemicals and Industries Corporation Ltd,India,right after completing my degree.I came to know a lot more than what I thought about when I started working.I never thought that chemical engineering was that challenging.Working in an environment where everything I see can blast at any time,can leak at any time,but it never happened and will never.I am still fascinated about the technology behind it. Getting into a company where that always fascinated me,that which always made me to think,made me to feel that nothing is impossible,is like reaching the sky. In short, your program is very appealing to me and a fountain that would quench my thirst for knowledge with an attitude of
I am an electrical Engineer. My majors is Control System Design. I believe in smart work and dedication. I am considering working at elance as my full time job.
A mechanical engineer with over 5 years experience in 'Computer-Aided-Design and Drafting' (CADD) in aerospace and automobile industries. Exclusive experience in making 3D Models, Assembly, Drafting and Production Drawings. Handled very large assemblies containing in the order of 2500 to 3000 parts. 3D Pipe routing and wire harnessing experience in both automobile and aerospace (hydro-pneumatic systems) industries. Can handle any CADD related project and deliver results in minimum time-frame possible.
Ocupation - Support engineer - STX RO Offshore Tulcea Industrial design, computer aided engineer drawings (Autocad, Catia, SolidWorks). Qualification - Diploma Engineer - Mecatronics Faculty of Mechanical Engineering and Mecatronics Politehnica University of Bucharest
I am a mechanical designer with 25 years experience in heavy engineering industry. My experience includes pressure vessels, plate work, ducting systems, piping systems and some structural design.
Mechanical Engineer with 30 years experience in design and manufacture of industrial components. I have extensive experience in design with AutoCAD and SolidWorks.
I am a Professional Engineer with 10+ years experience in electrical, power, and controls engineering. My experience is very diverse and includes design of low voltage systems, control systems, fire alarm systems, etc.. I have worked in both individual, as well as team environments to provide project deliverables for clients using various industry-standard codes and client-specific standards.
Electrical engineering, industrial automation, software enginnering, project management
Familiar in using formulas in excel suitable for database manipulation
I would take it as a prestige to be a part of your prestigious healthcare industry. I am a Biomedical Engineering Graduate from Anna University with a CGPA of 7.9 on a scale of 10. I am always keen to learn more and more. I am diligent and will strive to bring the best in me. I completed Biomedical Engineering Training at MIMS Hospital ,Calicut, India. I assure you that I will do the best in me if I am offered the job.
I AM A FRESH EEE DEGREE ENGINEER HAVING INDEPTH KNOWLEDGE ABOUT MY SUBJECTS EAGERLY WAITING FOR A CHANCE TO EXPLORE MYSELF, WITH MY PRIOR INDUSTRIAL TRAINING EXPERIENCES & KNOWLEDGE, AT MY WORK PLACE WHICH WILL DEFINITELY WILL BE FRUITFUL FOR MY ORGANISATION & HENCEFORTH FOR MY CAREER.
I am a graduate Civil Engineer with over 25 years of experience in construction industry.
I am a bachelor's degree student in Northern Illinois University's mechanical engineering program. As a student, my goal is to understand and apply current engineering practices to real world applications. I have spent many years in the healthcare and rescue industry utilizing rescue systems and applied engineering analysis. Within the rescue industry, I am trained in the areas of structural collapse, trench collapse, confined space, and high angle rope rescue as well as vehicle and machinery extrication. I employ this specialized training as a member of the Illinois Urban Search and Rescue Team.
Graduated with a Degree in Mechanical Engineering. Possesses NEBOSH International General Certificate in Health, Safety and Environment. Worked at numerous industries ( Manufacturing, IT Servicing Company, Supermarket, Hard Labor and also Part-Time Tutor). A native East Malaysia. Can speak in Borneo language, Malay, English, and also Mandarin. Love to travel.
I am a Industrial Designer with Years of experienced Surfacing Designs for solid models for slas, 3d printers, Clay models, Foam Models, and production parts, Freehand sketching and Vacuumformer capabilities for parts 25"x40" with a 10" draw.