Freelancers

Freelancers by Skills

1-100 of 193 Professionals
Freelancers
Operations Research / Mathematical Modeling

I work full time as a tenured mathematics professor at a top New England college and I do consulting during the summer and in my spare time. My expertise is in building linear and integer programming models in Excel and in other software. I also work with other types of mathematical modeling (e.g. differential equations, difference equations, network modeling, etc.) and in mathematics education. I have a Ph.D. in Applied Mathematics from the University of Maryland and an undergraduate degree in Physics and Astronomy from Harvard College.

United States, CT, New London | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Planning, operations research, linear programming

Graduated from Software Engineering in 2002; then specialised in Operational Research in Master and phD programs. Been teaching at 2 universities, with 10+ years of working experience. Now working in a full time job in Belgium, optimisation applied to scheduling/production system. I run a company during my off office hours and extensive holidays, specialised in: - operational research: LP, IP, metaheuristics - TCP/IP applications

Belgium, Brussels, Brussels | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Industrial and Systems Engineer

I am an Industrial and Systems Engineer from Georgia Institute of Technology with 6 years of industry experience developing, improving, and implementing models of complex systems in multiple industries. My specialty is advanced mathematical methods such as linear programming, dynamic programming, simulation, and statistical analysis. Most importantly, I have the technical skills required to implement these methods using a wide range of programming languages. I have worked in multiple industries including manufacturing, logistics, environmental, education, and defense. Some of my high profile projects have been route optimization for UPS and developing optimal control policies in Intel wafer-fabrication plants. My largest project was developing and implementing the entire control system for a manufacturing plant from the ground up. It enabled decision makers to performed production scheduling, lead time quoting, cost analyse, and inventory control in real time.

United States, AL, Auburn | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Mechanical, Electrical, and Product Development

Leardon Solutions consists of four solution groups that apply thorough product development processes to the needs of our customers. This team has capabilities in program management, product design, engineering, prototyping, product qualification, and volume production.

United States, CA, San Diego | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced CAD designer for all designing needs

I am a bachelors in Mechatronics and Control Engineering.I have always had a knack for designing things and bringing them to physical reality. Hence,my interests towards CAD based softwares like SOLIDWORKS etc and provide complete part design to manufacturing process solutions. Currently i design dies for the family manufacturing business(examples can be seen in my portfolio). Another skill i have is PLC programming and HMI design. I currently work for a company that provides services for Allen Bradley PLC systems. My job requirement is to program the PLCs on RSLOGIX 5000(by Rockwell Automation) based on the project automation requirements and i have successfully executed two projects (Nahil Irrigation Project, Dubai and Ruwais Waste Water Treatment Plant, Dubai. The HMI is designed using the FACTOR YVIEW STUDIO by Rockwell Automation as well. Apart from that i am also a reasonably good writer and was the english editor of both the school and college magazine 'Al-Hilal'.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 4.9 (28 reviews)
'Power electronics expert', Optic fiber specialist

I am a researcher and a lecturer, electronics subject with almost 10 years concrete experience in power electronics designing, simulating, consulting and building power electronics systems. I do optic fibre splicing, PLC programming, work with SCADA systems and in RF equipment and radio engineering systems. Right now, I am leading a team which is busy with Solar powered electronic table USB charger project for the Energy and Renewable energy projects for the Centre of Excellence: Alternative Energy, Southern Gauteng Science & Technology Park (VUT Sebokeng Campus).

South Africa, Gauteng, Alberton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical-Robotics-Automation Mfg Engineering

BSME, Master's of Manufacturing Engineering, Registered Professional Engineer, 30+ years experience of mechanical, manufacturing, robotics, & factory automation engineering. User and North American reseller of RobotWorks(r) CAD-based offline robotics programming and simulation software.

United States, MI, Commerce Township | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Being an electrical engineering student from a renowned university i have great skills in doing different projects , solving questions like assignments and homework. i have studied these A lot of courses some of them are Power System Analysis & Design-Elective Instrumentation and Measurement Digital Signal Processing Control Systems Object Oriented Programming Linear Circuit Analysis Calculus Engineering Mechanics Appllied Physics Linear Algebra and ODEs Introduction to Programming Engineering Drawing Calculus and Analytical Geometry Complex Variables and Transforms Electrical Network Analysis Digital Logic Design Electronic Devices and Circuits Microprocessor Systems Electronic Devices and Circuits Signals and Systems Electromagnetic Field Theory Communication Systems Electronic Circuit Design Electrical Machines Numerical Methods So For assignments , homework projects simulations at multisim and pspice feel free to contact.You wont regret.

Pakistan, null, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Industrial Engineer

Hi I am an industrial engineer with master's degree. I have six years of experience as a project planner / scheduler, expert in oracle primavera, and PMP certified professional. I have more than 10 years of experience in teaching. I teach project management, Primavera P6, Discrete event system simulation, Arena (Rockwell), Feasibility studies, and COMFAR. My other skills are: MS Access, MS Excel, MS Project, linear programming, and Lingo.

Canada, Ontario, Toronto | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Over 40 years manufacturing experience. Over 20 years implementing Advanced Planning and Scheduling Systems including, linear programming, integer programming and statistics.

United States, NJ, Bridgewater | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Data scientist, r programming and excel expert

Excellent data science, machine learning and mathematics skills. An engineering graduate having the ability to apply theoretical concepts to practial real world problems. Experience in inference, clustering, regression, operations management, linear and integer optimization, text analytics, r programming, microsoft excel, microsoft power point, transqt sql etc

India, Kashmir, Jammu | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Optimization Professional

Current graduate student with with an "A" in a course on optimization that includes optimization by Linear Programming, Genetic Algorithm, Particle Swarm Optimization, Simulated Annealing.

United States, MI, Houghton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Specialist FE Analyst

Graduated from Ruhr University Germany (2009) with MSc Computational Engineering, I specialize in usage and development of FE softwares for thermomechanical analysis and design of machine components. I have 5 years of experience with FE analysis using Abaqus/Standard (and Abaqus User Subroutines UMAT/UEL), MSC.Nastran, Calculix and FEAP; FE meshing using HyperMesh (and Tcl scripting for Hypermesh) as well as MSC.Patran (and mesh automation using PCL) and Simlab. I work with CATIA, SolidEdge and SolidWorks for mechanical design.

Germany, North Rhine-Westphalia, Dortmund | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert industrial Engineering, Operation Research

I received my M.Sc. degree in Industrial Engineering with the major of Operation Research and I obtained my B.Sc. in Industrial Engineering. if you have any project that is related to Mathematical Programming, Operation Research,Industrial Engineer or if you have some program in Cplex, Matlab, Lingo, I could say you can trust me to do that as the best. In some other fields as Financial and business I have great related experience with the good innovations that it would be useful and make your project more efficient. Also there is a great ability in computer skills as Word, Excel and Writing and translating. In Turkey I have some experience as a English Teacher for children and adults. I tried to explain my abilities briefly. You can find more with Specific items in my CV. Thank you very much in advance. Sadegh d.

Turkey, Adana, Adana | Engineering & Manufacturing | Rating 0.0 (0 reviews)
ANSYS FLUENT,CFD,Heat/MassTransfer,MATLAB,OpenFoam

This is Raj here, am a Skilled academic writer and a Chemical Engineer. Presently, I am pursuing PhD in IIT Bombay with CFD, Fluid flow, Multiphase flow, which is expected to complete by January, 2015. My technical and personal skills are: Technical: Commercial Tools: MATLAB, ANSYS_FLUENT, GAMBIT, STAR- CCM+, OpenFoam Proficiency in Shell and Tube Heat Exchanger design by Kern's Method Applications: Microsoft Office, and other common productivity packages for Windows, Linux, platforms, Photoshop, LATEX, lyx Familiarity with Operating Systems: Microsoft Windows,Linux Programming: Introductory Knowledge of C and C++ Personal: Working with teams, good analytical and problem solving skills, quick learn I have written a couple of journal papers in my research area. My interests are reading scientific journals, application of tool to development of new product and news. My strengths are - good analytical skill, scientific mind, tech savvy and excellent writing skills.

India, Maharastha, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

I can provide all type of tutoring in following subjects Linear Control System, Digital Control System, Real Time Modeling & Simulation, Electronic Circuits, Digital Logic Design, Communication Systems, Power Electronics, Wireless Communication, Digital Image Processing, Advanced Computer Networking, Numerical Methods, Optimization Technique, Linear Algebra,Differential Equations, Matlab(Simulink Simmechanics), Solidworks.

Pakistan, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm finishing up my degree in biomedical engineering, but I've also taken several classes from electrical engineering. I've done a lot of programming for about six years as well.

United States, KS, Maize | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Railway Engine Engineer & Equipment

- Planning of Maintenance programs for GM and GE locomotives - Analysis of incident reports and distress locomotor gear. - Management of technical documentation provided by the manufacturer. -Elaboration of technical specifications and maintenance intervention. -Calculation of the reliability of the machines. -calculation of the forecast supply of spare parts. language: Computer skills: Excel, PowerPoint, Word, SolidWorks Fotran. Knowledge: Design of mechanical energy systems.

Algeria, ALGERIA, ALGIERS | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Experienced CNC setup technician/programmer trying to branch out into Freelance CNC programming. well versed in Mastercam X6 for lathe. heavy experience in programming 2/3 axis CNC lathes with Fanuc/Haas controls. Light experience In programming 3 axis Haas milling centers. Over 8 years experience in the manufacturing industry

United States, CT, Moodus | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PhD, exprt in Mechanics,MATLAB, MATHEMATICA, MAPLE

PhD in Robotics from Indian Institute of Science . Im specialized in MAPLE, MATLAB, MATHEMATICA platforms. Well versed in Dynamics, vibrations, Robotics, Mechanics, Mathematics and Physics, I can give you accurate solutions. Customer satisfaction is my main moto. Though new to freelancer, I have been in freelancing for past 5 years with excellent feedback on sites like 24houranswers, transtutors etc. My peer reviewed publications will speak for my know how and depth in understanding.

India, Kerala, Thrissur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
RF Designer, Matlab Antenna CAD etc

We are a team of highly skilled electronic engineers with more than 10 years of experience in the field of electronics. Our team consist of 5 members: 5 Masters of Electronics. Recently we've been working on different Electronics Projects but at freelancer we are newbie. Our fields of interest are: Schematic design, Prototyping, PCB Design, Development of Electronic systems,RF systems, Microcontoller programming (Atmel AVR), PCB Design, Electronics design and engineering. Alitum Designer, PLC based control system with HMI;s etc.we Also make undergraduate students projects and guidance.

Pakistan, Sindh, Pakistan Employees Cooperative Housing Society | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Field Engineer.Excellent Lecturer

To provide high quality, relevant learning environment which enable students to maximise their educational, vocational and personal development potential thus facilitating the fulfilment of their aspirations. To develop a relevant research environment where academics studies not only accomplish basic task, but leads to creative work undertaken on a systematic basis in order to increase the stock of knowledge.

Pakistan, null, Peshawar | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Semiconductor Engineer

I am an experienced automotive electronics expert versed in analog, digital, mixed signal and power electronics design from the inner operations of an IC right up into the application. I have a strong, fundamental understanding of solid state devices and leverage that to extend into system level design.

United States, MI, Ann Arbor | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

i meet the specifications and requirements of clients and keep on schedule

Philippines, metro manila, las pinas | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Articulate and numerate with a penchant for details. Experienced in Engineering and Building construction sales, management and implementation from an owners perspective. Every task from concept to completion the aim is to exceed expectations.

Jamaica, St. Andrew, P.O. Box 89 Kingston 10 | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Simulation designer and implementer

10+ years experience developing simulations for security, behavioral, and procurement issues. I hold a PE license and a Certified Modeling and Simulation Professional. I believe anything can be modeled. Let me help you

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am an Industrial Engineer from the Faculty of Science and Technology of the " Our Lady of the Assumption " Catholic University , graduated in 2003 with Final Draft Thesis entitled "Study of Pre -feasibility Technical and Economic Installation and Administration a Waste Treatment Plant Pathological "with final rating 5 . I have previous experience in the plastics industry as head of plant and civil works in the country and abroad ( Argentina and Bolivia ) , as construction companies and resident supervisor works in multinational cellular engineer , which led me to travel and see my country and neighboring tip to tip . I am willing to provide solutions, with persistence and responsibility , committed to the values and objectives of the organization.

Paraguay, Central, Asuncion | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Expert research scientist, mathematician, and embedded systems developer with extensive professional experience and a background that includes: • Tackling hard questions and creating innovative and efficient computing solutions. • Seeing solutions through from concept to design through deployment, • Focus on strategic placement of a solution and technical design excellence. • Effectively communicating complex concepts to technical and non-technical audiences and in discussions. • Researching applicable mathematical models to apply them for analysis and design. • 15+ years’ experience using Python, Matlab, and C/C++ for algorithm development and embedded system design. • Multidimensional data analysis: statistical estimation, clustering, filtering, detection, time series analysis, and classification. • Leading technical teams. • Developing high-performance real-time distributed computing systems: sensing, digita

United States, TN, Nashville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Project Engineering

I am a competent Project Engineer and I strive to provide good services to my clients. Having to work as a Project Engineer for more than two years has enabled me to gain a firm grasp on the different aspects of Engineering Field.

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 4.8 (4 reviews)
null

I am doing B.Tech in mechanical engineering from NIT,Allahabad(India's 9th ranked engg college).I have qualified many comptitions likeAIEEE(300 rank),Gate(600 rank).I am very good in academics.I am topper in my branch with 2nd rank.

India, Uttar Pradesh, Allahabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am pursuing Electronic and Electrical Engineering from Heriot-Watt University, UK. I am current in my 4th Year (Honors) and I will graduate on the 26th of June. I am looking for full time opportunities in my field of study which will be valuable for the growth of my future career prospectus. I would also like to explore internship opportunities in my fields of interest so as to expand my valuable knowledge and skills in those fields.

United Kingdom, null, Edinburgh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert In Instrumentation, BMS, FAS, FSS

Instrumentation Engineer with Diploma and Degree in Instrumentation. Reach experience of 12 Years in field of DCS, Safety System (ESD), Building Management System, Fire alarm System and Sire Suppression System.

India, Maharashtra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Ingeniero industrial de la Universidad de los Andes de Colombia. Mi área de investigación es el desarrollo de algoritmos exactos y heuristicos para los problemas relacionados con ruteo, scheduling y en general la logística. En el campo laboral me destaco por ser buen trabajador, con habilidades en la solución de problemas y responsable.

Colombia, Bogota D.C., Bogota | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer

I'm a young mechanical engineer with experience in mechanical design, optimisation, and analysis of systems. I'm committed to helping the client reach their goals with their projects with the skills I posses.

South Africa, null, Witbank | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Team of applied mathematicians and engineers

We specialize in delivering technical computing and design solutions in general industrial and engineering problems. Mathemech was conceptualized by the demand for quantitative research and industrial problem solving.

South Africa, null, Potchefstroom | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a bachelor in mechanical engineering with certified energy auditor.

India, West Bengal, Calcutta Ballygunge | Engineering & Manufacturing | Rating 0.0 (0 reviews)
production manager

Seeking a position whereby my technical and industrial experience and interpersonal skills can be usefully applied and fully developed within a growing creative encouraging environment

Egypt, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am hydraulic Engineer by Profession. I specially do all kinds of civil engineering jobs and have good knowledge of all kinds of civil engineering jobs. I am good in engineering playing with engineering softwares . I also am interested in quantity estimating jobs for all fields of civil engineering.

Nepal, Nepal, Kathmandu | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Control and Embedded Systems engineer

I am an electrical engineer with experience in designing custom electronic circuits (including PCBs) to solve any problem you may have. I also have lots of experience designing control systems, both analog and digital, to fit everyone's needs. I am also well versed in the used of microcontrollers and microprocessors from the 8051, ARM, and PIC families to create innovative solutions. As of lately, and as part of a certification from UCSC, I have gained knowledge and experience in the use of FPGAs and the HDL Verilog. During this certification I also learned how to use SystemVerilog to create verification environments based on an OOP methodology, which is the base for the popular UVM. Apart from that, I can use a wide array of mathematical and engineering software such as MATLAB (including simulink), Scilab (including Xcos), LABView, Mltimsom, Proteus, Eagle, among others, to successfully complete the design at hand assuring the top quality of the final product.

United States, FL, Winter Park | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Nearly a decade of systems engineering and project management experience with the Department of Defense.

United States, NC, Avon | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Highly capable engineer with advanced competencies

Highly proficient with advance qualification in all aspects of oil & gas, chemical, mechanical and design engineering.

Nigeria, Benue, Otukpo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have varied experience in Design/Modelling related software and Analytical software like ANSYS. Also, I provide back-end engineering support, including but not constrained to Structural Analysis, Finite Element Analysis and Machine Design.

India, Karnataka, Bengaluru | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Masters in Industrial Management and Bachelors in Mechanical Engineering with technical skills and domain experience in Mechanical Maintenance of HSM, Blast Furnace and CCS of Steel Plant and ERP products like ADVANTAGE and SAP.

India, Jharkhand, Bokaro | Engineering & Manufacturing | Rating 0.0 (0 reviews)
am intrested to work partially on time basis.

Technical Skills: COMPUTER SKILLS Auto Cad , Basic Computer Knowledge Applications Cad 2D drawing and 3D drawing.. Academic Credentials : Degree Year College/University Percentage B.E/ MECHANICAL DOING KLN COLLEGE OF ENGINNERING D.M.E APRIL 2014 TAMILNADU POLYTECHNIC COLLEGE 86% S.S.L.C MARCH 2011 ST.Britto higher secondary school 91% Strengths: • Good communication and interpersonal skills; organized, professional, diplomatic, cooperative and trustworthy team work qualities. • Meet deadlines, goal-directed, strong on follow-up, and Handled targets. Strong Points in Myself : ? Hardworking towards the achieving the Goal. ? Intellectual thinking. ? Flexibility in technical area.

India, Tamil Nadu, Madurai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
matlab teacher

I can help you to develop codes in matlab,scilab for engineering projects.

United States, MI, grayling | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Renewable Energy Consultant

With a background in Solar Energy/Resource Management and Consulting, I have also developed my career to encompass Residential and Commercial business services, as well as new business development and marketing. My passion and enthusiasm for working in partnership with clients has resulted in positive feedback, and is an aspect of my work I am especially proud of. I am also fully experienced within the General Management, and sales /marketing role areas. I specialize in Solar Energy Engineering, Waste to Energy Technologies, LED Lighting, Resource and Energy Auditing, (specifically commercial hospitality facilities), Project Development experience in practical Green Community Development Studies. I have sound design and engineering skills.

United States, CA, San Diego | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I love challenges in my life. I like to find a creative way of doing things. The harder the challenge is the more I enjoy to accept it. I am a civil engineering student with excellent skills in Math especially Differential Equations, Calculus, Algebra and Statistics. Also I am proficient in writing technical reports due to my experience producing complex scientific reports during my time at school.

Morocco, Grand Casablanca, Casablanca | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

Standout with great solution! With over 13 years of producing great projects for some of the most innovative companies in the world, I'm here to bring your ideas and vision to life.

Palestine, Gaza Strip, Gaza | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD automation specialist

I have 10 years experience in development of applications for AutoCAD platform. Currently in charge of development of professional CAD applications.

Russia, Omskaya, Omsk | Engineering & Manufacturing | Rating 0.0 (0 reviews)
A Maths Wizard to solve all your problems

Overall 10 years of experience in teaching mathematics and 5+ years into online tutoring. I can solve any problems upto university level in mentioned categories.

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineer

Idea has to become a physical reality. If you fail to make your idea to become a reality then someone else will. Hire me and I will make sure that your idea becomes a reality with you as its owner. I am an Industrial Engineer currently serving in Department of Industrial Engineering at UET Peshawar, Pakistan. I am interested in doing engineering projects. I have been teaching 3D modelling software like Pro E for the last 4 years. I have also help students in their projects regarding modelling work.

Pakistan, Khyber Pakhtunkhwa, Peshawar | Engineering & Manufacturing | Rating 0.0 (0 reviews)
the Roboticist!

I've been working on Robotics for the past 8 years. Building robots gave me expertise in the fields of Design, Coding & Fabricating.

Sweden, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have a good background in design,architecture and construction in general . I am so keen in timelines and always ensure that i beat the deadlines anytime

Kenya, Nairobi Area, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Drafter and Programmer for an Arizona based Manufacturer.

United States, AZ, Prescott | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expertize in Telecom Networks, DSP, Robotics

I want to Work on Evolution Technologies like HSPA+ and many more. My experience is mainly in digital signal Processing and Robotics.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Operations and distribution professional with demonstrated accomplishments and 28+ years’ experience in global Supply Chain, Planning/ Scheduling, Purchasing and Warehouse management and for multi-channel distribution enterprises. With success in technology and/ business solutions. Expertise in Strategic Purchasing, Materials Managing, S&OP and Advance Planning and Scheduling and Supply Chain management. Computer internet and e-mail literate, proficient in the use of MS Office, detail knowledge in Word, Excel, Power Point, and ERP systems as AS400 data base (BPCS, MAPICS), SAP, MFG Pro (QAD). Expertise in: TOC (Theory of Constraints), Lean process, KanBan, JIT, ERP, Synchronous management.

United States, TX, El Paso | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical design engineer

I had experience of designing of pressure vessels, heat exchangers for process equipment manufacturing company. I worked for about 2 years before joining masters course in machine design. I do have knowledge of ASME, TEMA codes required for pressure vessels design. I am looking for freelance projects in mechanical design (related/not related to my experience) so as to build a stronger skill set for future endeavours.

India, Maharashtra, Navi Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering and Management

I am here to solve our engineering and management problems

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Research operatives

My "seemingly" varying skills is a function of same memory allocation (spatial temporary memory) of my brain. So despite the diversity I offer mastery and specialization.

Nigeria, Lagos, Isolo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm a good God fearing student of Bells University studying mechatronics engineering.

Nigeria, Lagos, Agboyi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Piping Engineer with working knowledge of CAESAR

B.E.-Mechanical Engineering M.E.-Production Engineering Certificate course in "Piping and pipeline Engineering" with working knowledge of CAESAR

India, Gujarat, Vadodara | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Matlab, Microprocessor projects ,copy editting

My Name is Muhammad Zeeshan Rasool and I Am an Electrical Engineer. A part Of time , i give for online Job. Now a days i m working on these type of Projects such as: Arduino , Pcb Designing , Proteus , Electronics Type,MicroControllers, Microprocessors,Matlab,Project Reports ,Veroboard,Word ,Excel and etc. People are remarkably bad at remembering long lists of goals. I learned this at a professional level when trying to get my high-performance coaching clients to stay on track; the longer their lists of to-dos and goals, the more overwhelmed and off-track they got. Clarity comes with simplicity. .Best Wishes

Pakistan, Punjab, Wah | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineering |Calculus |Algebra | NA &C

I have done Masters in Electrical Engineering (Electrical Engineering Specialization Control systems) ***Areas of Expertise*** - Electrical Engineering - Mathematics - Linear Algebra - ODE (Ordinary Differential Equations) - NA & C (Numerical Analysis & Computation) - Calculus - Solving of Advanced Mathematics and Engineering Problems/Numerical. - Projects and Academic Report Writing. - Students' Projects and Assignments. - Web Designing/IOS/Android Softwares Skills - Mathematica - MATLAB. - MultiSim - ETAP. - Eagle, Proteus and MultiSim. - AutoCAD. - Chief Architect Premier. - Microsoft Office (Word, Excel, Powerpoint) - Microsoft Project. - Microsoft Visio. - Dialux

Pakistan, Khyber Pakhtunkhwa, Abbottabad | Engineering & Manufacturing | Rating 4.9 (21 reviews)
Qualified Electronic Design Engineer

Offering a complete electronic systems design and consultancy service. With small overheads I can impart a professional personal flexible service to deliver a quality reliable product at low design costs. An innovative, well-organised individual with an extensive background in electronic system design and product development. An effective, disciplined and reliable worker who has the ability to meet targets and objectives and has the persistence to achieve the highest standard in every undertaking My name is Dave Lelievre and I am an innovative, well-organised individual with an extensive background in electronic system design and product development. An effective, disciplined and reliable worker who has the ability to meet targets and objectives and has the persistence to achieve the highest standard in every undertaking. I have been an electronic design engineer for over 35 years after graduating in 1975 with a first class honours degree in Electrical and Electronic Engineering.

United Kingdom, Dorset, Poole | Engineering & Manufacturing | Rating 5.0 (21 reviews)
Expert in Embedded SW/HW design, real-time systems

10 years of experience in embedded systems and system software: Assemblers(x86, ARM, PowerPC, C6000, C2000, AVR), C, C++, MFC, QT programming; Real time systems design: Linux & Windows Embedded BSPs, device drivers Device drivers, Libraries, Integration with 3d party SW, SW/HW integration Embedded systems design: Firmware, MQX, lwIP, Free-RTOS, ucLinux, Embedded Linux, BSPs, device drivers Board design, boards bring-up and prototyping cost optimization Hardware Design: Schematics, PCB, Gerbers GUI Applications with QT, System Utilities (WinAPI, MFC)

United States, IL, Chicago | Engineering & Manufacturing | Rating 0.0 (0 reviews)
GIS Analyst

My undergraduate program in Surveying Sciences is a judicious mix of theory and practice majoring Land Surveying, GIS, Remote Sensing and Cartography. I am expert in digital image processing, 3D modeling and spatial data analysis. I could explore my knowledge on advanced topics in Remote Sensing such as Image Enhancement, Microwave Remote Sensing and Image Classification and Analysis. On the other hand, I am also enriched with Open Source GIS, Digital Topographic Mapping and Data Modeling. I carried courses on Digital and Web Mapping. I have followed the advanced courses in Mathematics like Linear Algebra, Spherical Trigonometry, Calculus I II, Differential Equations and Geometry which fulfill the mathematical background needed for higher studies. Currently my interests are focused on Remote Sensing and GIS applications.

United States, OH, Toledo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Design Engineer

I was a lead circuit designer for Texas Instruments for 10 years. I then became an independent designer still consulting them on designs for 5 more years. I created dozens of microchip products that became huge hits selling millions of units. In fact, most likely you own a product, or two, that uses a circuit I designed (this includes some Apple devices). I can take your product from concept to reality. This includes research, component selection, circuit design, PCB layout, BOM, prototypes, programming, eval & manufacturing setup. I have an MSEE degree & graduated with honors. For 30 years I've been designing electronics including everything from microchips to robots to wireless devices. Download my FREE report - How to Develop, Prototype, and Manufacture Your Electronic Product @ TeelEngineering.com/elance Also see me at: Linkedin.com/in/johnteel Quora.com/John-Teel-1 PlanetAnalog.com/bloggers.asp#John_Teel Twitter.com/JohnTeelEE

United States, AZ, Sedona | Engineering & Manufacturing | Rating 5.0 (1 reviews)
Sr.Embedded System Designer, Developer, Programmer

Mechatronics Engineer with specialization in Robotics and Intelligent Machine Engineering. I am expert in Programming, Desigining Circuits, Simulation, and Prototyping.

Pakistan, Islamabad, Islamabad | Engineering & Manufacturing | Rating 4.8 (3 reviews)
One Stop Shop for Product Design, Prototyping& Mfg

We offer one-stop solutions to Innovators/ Entrepreneurs with their Product Development projects taking it from Concept -> Design -> Finished Product.. Our services : Product Engineering, Application Development, Embedded/ Microcontroller Programming, PCB Design, Proto PCBs, Mechanical Design for Parts and Enclosure, Component Sourcing and Mass Manufacturing. Skills and Domains : # Engineering / Design : Power Supplies, DC - DC Converter, AC-DC Converters, SMPS, LED drivers, Data loggers, RF, Thermal Printer, Smart Card, Biometrics, Displays # PCB Design : OrCAD, PADS, Eagle, Cadence, Cadstar # Mechanical design 2D, 3D using AutoCAD, SolidWorks # Manufacturing : 1) PCBs single side, double side to Multi-layer PCB, Flexible/ Rigid-Flex PCB 2) PCB Assembly 3) Box Build / Contract Manufacturing for Prototype, small and medium volume production jobs. # Asian Sourcing for PCBs, Components and parts, manufacturing, enclosures, OEM / contract mfg.

India, Gujarat, Vadodara | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Transform your idea into design and product

SysDone is a group of experienced technology professionals from diverse fields with special focus to design and develop consumer electronics products. We have expertise in Embedded system design and development. Our group includes industry professionals and researchers who are ready to assist you in transforming your ideas into successful product. We also provide services for technical report writing, Thesis and paper writing. We believe in: **Delivering quality work in a professional manner **On time delivery **Consultancy and support of product throughout lifecycle You can contact for any of mentioned engineering services. Additionally, we would be glad to work on new and innovative ideas. This may include Bluetooth/Arduino based device control, Remote control device design and development and many more. Let your idea be Engineered by us!

Pakistan, null, Karachi | Engineering & Manufacturing | Rating 5.0 (5 reviews)
Expert Electrical Engineer and Technical Writer

My experience in Electrical Engineering combined with strong English language skills makes me an expert in writing quality essays and solving complex engineering problems. I have experience in Electronics, Circuits, Telecommunication, Computer Programming, Data Communication and Networks, Analog and Digital communication, Power Electronics, Physics, Mathematics, and software including Matlab, Auto Cad 2011, keil(MIC), Logic Works In Programming expert in C/C++, Assembly, LabView, PLC, Atmel Controllers, Intel Pocessors and more. In Mathematics expert in Algebra, Integration, Differentiation, Linear Algebra, Numerical Analysis, Complex Variables and Fourier Transforms, Laplace Transforms, Applied Calculus and Trigonometry etc. In Communication expert in Signal And Systems, Communication and antenna, Wireless Communication. In physics expert in all physical subjects and concepts like Forces, Electric forces, vectors etc.

Pakistan, Punjab, Islamabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer & an Established Quant

I am a Mechanical Engineering Graduate with strong core knowledge in various fields. Having worked in various Verticals and streams I have a strong knowledge in Manufacturing, CNC/VMC, Design, DFM, HVAC, Heat Load Calculations, Operations Research, Linear Programming and ALgorithms, Drilling Engineering, Electrical Engineering, Drafting, Crane Design and Troubleshooting, Heat and Mass transfer, Piping Engineering, P&ID, Fire Protection Engineering and Project Management. I also have strong knowledge in various standards applied across various Industries like ASME standards, ASHRAE standards, NFPA guidelines, Geometric Dimensioning and TOlerancing, LEED Specifications and various EPA rules.

India, Maharashtra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer

Electrical Engineer with experience in PLC Automation, P&ID, SCADA, Electrical Panel design and Schematics. EDUCATION New Jersey Institute of Technology, Newark, NJ Degree Completed: May 2014 B.S. Electrical Engineering (Enrolled in BS/MS Program) Overall GPA: 3.419 (Cum Laude) Senior Design Project Competition, Electronic Fire Gear, 2nd Place. Registered for FE Exam Jan/Feb 2015 United States Army 63 B Light Wheeled Vehicle Mechanic Certification September 2003 Blue Force Tracker and Mission Tracking System Certification August 2008 Secret Security Clearance December 2002 RELEVANT COURSEWORK Energy Conversion; Power System Analysis; Renewable Energy Systems; Power Electronics; Linear Systems. HONORS New Jersey Institute Technology - Senior Design Project, 2nd

United States, NJ, Clifton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Hands-on experience in dynamic parts design • Excellent skill in product development and simulation. • Excellent skill in FEA analytical software as Ansys, Abaqus • Excellent skill in computer programming and numerical analysis software as Matlab. • Excellent skill in CAD softwares on 3D design and 2D drawing.(Solidworks) • Solid understanding of materials mechanics, elasticity, dynamic mechanics, vibration, linear and nonlinear finite element method

United States, NJ, Jersey City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Real-Time Embedded Systems Design

Real-Time Embedded Systems Design from the ground up.

United States, CA, Chula Vista | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering Inspiration!

I'm an Electrical Engineer by profession and a Final Year Postrgraduate in Robotics & Intelligent Machines Engineering. Over the past 6 years during my PG and UG courses. I've developed expertise in a number of domains - principally related to my study field. I've got a thorough theoretical and practical command on core Electrical Engineering, Robotics and AI subjects such as; 1- Embedded Systems (C & Assembly) 2- Digital and Analog Electronics 3- Hardware Designing (Verilog/VHDL) 4- Software Programming (C/C++) 5- PCB Schematics & Layout Designing. 6- Mechanics & Dynamics of Robots 7- Design, Testing and Implementation of Linear and Advanced Control Systems in Robotics and Electrical Applications. 8- Algorithm development, AI, Neural Networks & Machine Learning. 9- Mathematics such as Geometry, Vector Calculus, Discrete Maths, Frequency Domain Analysis and Probability Theory (to name a few) I also enjoy Research, Writing (Academics & Short Stories) and Hand Sketching.

Pakistan, Punjab, Gujranwala | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

In my work I leverage a combination of superior quantitative/analytical skills and leadership/interpersonal skills demonstrated in numerous leadership experiences. Across my engagements I've developed a proven record of generating and implementing creative ideas to bring about measurable change. Statistical expertise: Predictive analytics; Statistical Learning and Data Mining; Experimental Design & Causal Modeling; Latent Variable/Structural Equation Models; Psychometrics (IRT and CTT); Multilevel/Hierarchical Models; Value-added Models; Quantile Regression; Logistic models; Local Regression Computing skills: MS Office; Linux; SAS; R/S-Plus; SPSS; SQL

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I study mathematic at Università degli Studi di Roma "La Sapienza" I supported this exams: Calculus, Mathematical Analysis, Geometry Linear algebra, Algebra 1, C programming language.

Italy, Latium, Ferentino | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Circuit Designer and VBA Developer

EXTENDED DOMAIN An established company with proven capability in circuit and system design and simulation, printed circuit board layout and routing, and software support. Contributing my knowledge, skills, and abilities to the accomplishment of the assigned tasks. Providing professional consulting advice. Delivering excellent products and services on time and within budget.

United States, CA, Canoga Park | Engineering & Manufacturing | Rating 3.7 (1 reviews)
Mechanical Engineering Services

Alejandro Jaramillo Master of Science Mechanical Engineer working out of Medellin, Colombia since January 2008. Effectively supported engineering departments from several companies in the United States and Europe with mechanical engineering tasks of various types including: machine design, 3D modeling, basic FEA, structural calculations, research and development, technical drawings, and technical specification documents such as request for quote, proposals, etc.

Colombia, Antioquia, Medellin | Engineering & Manufacturing | Rating 0.0 (0 reviews)
engineer, programmer, developer, and analyst

I have a BS and an MS in Mechanical Engineering and specialize in theoretical/computational physics including shock/physics hydrodynamics, radiation transport modeling, turbulence modeling, computational fluid dynamics, particle methods (SPH, PIC, EPIC, and FLIP), finite element analyses (static, dynamic, elastic, plastic, nonlinear, large-deformation), finite difference analyses, Monte Carlo methods, multigrid, adaptive gridding, Fast Fourier Transform, and algorithm/code development including vector and parallel processing. Since 1996 I have designed a number of websites. (Ex: www.tribaltraders.com) Software experience includes VB.Net, C++, Fortran (90, 77, Cray, and CM), C, IDL, VB, HTML, CGI, Perl, JavaScript, PHP, MySQL, Assembler, Basic, Pascal / ALFA, RAVEN, SPHINX, MCNPX, CTH, PAW, MATLAB, ADINA, ADINA-T, NASTRAN, STRUDL, GRID8, FESAP, FETAP, PATRAN, COSMOS, MS Office, WordPerfect, Micrografx Webtricity. Currently working with Adobe Photoshop, ColdFusion 8, and Flex.

United States, OH, Akron | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Cad/cam PRO/Engineer CREO Mechanical engineering

-Mechanical Engineer with over 19 years` experience in Projecting and Design automatic packaging lines and machines, mechanical assemblied and components. -Skilled in design various mechanical components. -Experience as Manufacturing Engineer and CNC programmer . -Skills in using a wide range of design, fabrication, and business solutions. -Highly motivated, disciplined and resourceful. Interact productively with people from diverse backgrounds. Technically skilled in following software: -Pro/ENGINEER (r18-Wildfire v5), PTC/CREO -SolidWorks -ACAD -MS Office

Serbia, serbia, trstenik | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Your potential. Our passion.

I am working as a System Engineer in Research and Development Sector. I have done Masters in Controls and Embedded Systems with Bachelor in Mechatronics. 10 years of experience in design, implementation of various engineering projects.Practical experience in research, design and developments for solving customer's requirements with less time and effort. Some of my research work has been published at international forums, and I am striving hard to keep myself up to date with the latest trends in my areas of interest. Good communication and interpersonal skills, ability to work independently as well as part of an integrated team. Goal-oriented, highly self-motivated

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Survey and Data Analysis

I am interested in challenging contract work in the areas of statistical programming and policy analysis.

United States, TN, Piney Flats | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

A highly talented Operations Research Professional with extensive experience in formulating and applying mathematical modeling and other optimizing methods using a computer to develop and interpret information that assists management with decision making, policy formulation, and other managerial functions. Develop related software, service, and products. Frequently concentrate on collecting and analyzing data and developing decision support software. Also develop and supply optimal time, cost, and logistics networks for program evaluation, review, and implementation.

Saudi Arabia, Riyadh, Riyadh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD Designer

Bachelor of Science Degree in Mechanical Engineering from New Jersey Institute of Technology. Posses extensive experience in designing for large industrial type machines, specifically linkages, gear designs, linear motion applications, along with several other areas pertaining to and industrial/manufacturing environment. Expert in SolidWorks, Inventor, Creo/Pro E and knowledgeable in ANSYS.

United States, NJ, Union | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Transforming Great Ideas Into Reality

Impact Embedded is a product development consultancy with expertise in creating embedded systems and a passion for executing multidisciplinary technology development projects. We provide services to a variety of organizations, from start up companies working to bring their concepts to market, to large companies expanding their engineering teams to meet temporary spikes in demand, to solo inventors seeking to embody their ideas in real proof of concept prototype devices. While specializing in embedded systems hardware and firmware development, we find that electromechanical systems with integrated electronics, sensors, actuators, and functional packaging are the most interesting and challenging projects. Impact Embedded contributors have broad industry experience creating integrated devices in fields including robotics, medical devices, automotive, defense, and telecommunications. Further details and recommendations at: http://www.linkedin.com/in/dominicgermana/

United States, NC, Durham | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronics Engineering

Electronic circuit design; Printed circuit board design; Microcontroller based systems design; Embedded Systems Development of automated industrial test stands and fixtures Systems integration User interface design; Computer Architecture Application programming languages C, RAD Studio, Delphi, PHP, MySQL, HTML, Python, Javascript. Advance knowledge of different Operating Systems and Real-Time concepts Design of Communication Systems with VOIP / SIP and CCTV technologies Highly skilled in fault detection and repair in electronic equipment Highly skilled in hand soldering and desoldering Precision SMD rework: 100+ pin TQFPs less than 0.5mm spacing, BGA re-balling. Technology BDM and start-up advisory. Pre-sales engineering.

Portugal, Lisbon, Lisbon | Engineering & Manufacturing | Rating 0.0 (0 reviews)