STRUCTURAL ENGINEER for technical drawing, modelling or structural analysis My main goal is to help with my AutoCAD and ArchiCAD which softwares I use in a daily basis since 2009. I'm also here to use my knowledge in steel, timber and reinforced concrete structural design for projects which require such skills. I uploaded some of my design plans in my profile what I made in the past. What you can see there is mostly in Hungarian but the titles explain the plans. I also worked using imperial using so any clients from Canad or the USA can hire me without concern. I'm flexible in working hours and if an urgent job comes in I won't stop working after 8 hours if the client needs the plans soon. As I've lived in Hungary and the UK I have experience mainly in EUROCODE design. I currently live in London/UK so if you're living here it can be even easier to contact me.
Â Master degree in Civil Engineering Â Advanced construction knowledge Â More than five years CAD drafting experience Â Experienced in the use of AutoCAD 2007 - 2013 Â Drafting experience in several related construction categories Â Excellent detailing skills Â Computer proficiencies: AutoCAD, SketchUp, FeMap, MathCAD
M.S. in Electrical Engineering with more then 7 years of professional experience as algorithm designer and researcher in energy, industrial control, avionics, safety critical embedded systems and common engineering consulting. Current interests include physical modeling, advanced control design, system identification, optimization and other science intensive problems.
Diplomed Civil Engineer with 12 years experience in Construction & Designing. AutoCAD, MS Office, Mathcad, Powerpoint
I work as a civil engineer - Designer for steel structures - specialized for transmission line poles and towers. Have nine years experience on designing and detailing of steel and concrete structures such as electrical transmission towers, industrial halls, steel buildings, and other type of steel structures, concrete buildings and foundation. Softwares that I work with: Tekla Structures StruCad - CAD CAM software from AceCad - fabrication and assembly drawings ArmCad - concrete reinforcement detailing Autocad ArchiCad Staad Mathcad Microsoft Office
Structural engineer with 13 years experience in commercial and industrial designs. 18 years+ experience in using Autocad. Also experienced with Mathcad and standard Microsoft programs such as Excel, Word, etc. Some experience with RamFrame. BSCE in Civil Engineering with a math minor. Licensed PE in Illinois and can reciprocate if needed. Excellent communicator and above average writing skills.
Mechanical engineering grad, UK citizen, pro engineer (CAD), matlab, mathcad experience, chinese language fluency
Professional Mechanical Engineer with more than 8 years experience in engineering, design and analysis role within product design, engineering, manufacturing and research facilities in United Kingdom based Subsea/Offshore Oil and Gas, mining and metals, paper, cement and power generation industry. Currently working with different clients for design and engineering solutions of subsea/offshore drilling equipments, structures and piping manifolds in accordance with API, BS EN, DNV, ISO 9001, ANSI ASME, NACE standards and specifications. Extensive working knowledge in state of the art industry leading design tools; Solidworks (3D 2D Structural Analysis), Autocad 2D and 3D, MathCAD, Frame Solver 2000, Inventor, Autoplant, Ansys. General Softwares: MS Visio, Excel, Word, Powerpoint, Data entry, Technical report writing etc.
In a short professional experience summary, I have contributed to the solution of turbomachinery components & systems problems since 1987. I have solved mechanical engineering problems in fighter and commercial turbojet engines, as well as ground-based turboshaft engines (W251-B12, W501, FT8). Some of the most challenging projects I have performed range from the F100 Anti-icing system and Nozzles, to Telemetry Thermal and Structural studies for the FT8 (ground-based), and the F119 engines. Cryogenic work I performed for RD180 rocket engine compact heat exchangers is recognized as very complete and concise (I created a 36 pages MathCAD workbook mathematical model of the compact heat exchangers including phase change via enthalpy table look-up). At Westinghouse Power Generation Unit (Orlando, Florida), W501: I was the main Thermal & Structures Sr. Advanced Analyst for Turbine Disc Broach (Firtree) Refurbishment Study.
Senior engineer with extensive experience (more than 7 years). Specialized education, academic degree: Ph.D. Strength calculations of metal structures, vessels and equipment working under pressure, mechanical systems and their components. Dynamic calculations of pumps, compressors, turbines, as well as analysis of their dynamic stability. Calculation of structures under the action of wind and seismic loads. Gas-dynamic calculations for the liquid and gas. For the calculations used software packages: ANSYS, CFX, ProENGINEER, SolidWorks, AutoCAD, Maple, MathCAD, MatLab, etc. Making reports under standards API, ISO. And many other engineering calculation and design work.
I am a licensed professional engineer with a M.S. and B.S in Mechanical Engineering and a Mathematics Minor from Villanova University. I have 3+ years experience as an aerospace materials research and design engineer specializing in transient heat transfer, mechanical, thermal stress, and dynamic analyses for various refractory composite thermal protection system (TPS) components on re-entry and hypersonic spacecraft vehicles. I also have 3+ years experience as an architectural MEP engineer designing mechanical HVAC, electrical, lighting and plumbing solutions for various commercial buildings. I have experience crating contract documents including drawings and specifications from project inception to construction.
Complete analysis and design and drawing of building structure including concrete ,steel,wooden building structure from roof to foundation and connection design and drawing as well.
I m construction engineer. Construction Projects-drawing
Completed M.Tech THERMAL from Nirma University. One of the best University of India. I completed my dessertation work on Flow over oscillating cylinder using FLUENT 6.3.26 and for post processing used a TECPLOT. I have to right a UDF for the oscillation of the cylinder. Typing speed is 40 WPM.
25 year experience, Licensed Profession Engineer (Ohio) Ph..D.. Mechanical Engineer
I have eight years of experience in machine design. Expert in handling fixture design and drawing creation. I can provide turn key solutions from concept to drawing finalization.
I am a mechanical engineer. I have 8 years experience in engineering and I'm working as full time engineer in a mechanical research center. I possess advanced knowledge in 3D modeling, animations, multi-body simulations, structural analysis, finite element method. I use my theoretical skills (mathematics, mechanics and strength of materials) to demonstrate the result of my simulation.
Commercial and Scientific Optical Device and Applications Development Recent Commercial Patent Activity 2 patents awarded, 4 pending Zemax raytracting and GLAD Physical Optical Modeling Optical Modeling, Device and Applications Prototyping Optics and optoelectronics using linear optics, nonlinear optical crystals, polymers, and liquid crystals from the UV to the far-infrared in free-space or in waveguides. Microscopy and photoluminescence imaging systems Coherent light source development for LIDAR, trace gas sensing, or fiber optic telecom. Recent projects include: Trace gas sensing using LIDAR or near-field techniques; LED illumination and camera systems; photoluminescence imaging systems; fiber optics and devices for DWDM; miniature and micro-optics; high resolution optical touch screen and improved radiance light emitting diodes; near-field scanning optical microscopy; nonlinear optical fiber development; and MWIR voltage-controlled liquid crystal waveplates.
Critical thinker and good desinger
Generous, hard-working & desire to learn & achieve more...
I am an Electronics/Instrumentation Engineer from GIKI Pakistan. I have developed my skills,during my course of study,of programming in Matlab,VB,Excel,Eagle,Embedded system,RF and communications protocols,Octave,C,PHP,AS3,HTML,Java script,Microwind,Verilog,Simulink,Labview,Latex,Pspice. I have also studied courses related to Technical writing,Communication skills,Project Management,Total Quality Management,Engineering Economy and Ethical and legal dimension.I believe that,having the required skills and knowledge,I can provide my best services to customers.
I am an engineer, teaching math for overseas students for competitive/school exams. I also work remotely with lot of clients; writing business proposals, analyzing financial data, statements and doing research. I also love creative writing and helping people with education.
I am a practical sense person, who uses the study and interaction with other people for continuing personal and professional development. I declare myself serious, motivated, adaptable, responsible, with positive thinking and always open to new ideas and new challenges.
If you are looking for professional support in your projects and in the same time you are concerned about the costs please do not hesitate to contact me. I could help you in the following areas: - Prepare PFDs and P&IDs; - Prepare mass and energy balance of the process; - Perform hydraulic and heat calculations; - Prepare data sheet for pumps, heat exchangers, tanks, special items; - Prepare tender specifications; - Prepare process descriptions, functional descriptions, operating manuals; - Calculate and specify Pressure Safety Valves and Disk Ruptures; - Prepare hazardous areas calcifications acc. to API 505 or IEC 60079-10 - Prepare and update the drawings; -Prepare process safety analysis (FMEA, Event tree analysis, ) - And many others.
Ad hoc and black box test cad systems. Design of systems of heating, ventilation and aspiration of administrative and household complexes, mine complexes, heat mechanical systems and gas supply systems. Work with technical documentation.
Scalar was founded in 2004 with a basic goal, support companies in their drive to sell manufactured products. Obviously this is a broad statement, but we have the experience to take a napkin sketch or a developed product proposal and convert it to a finished product. When it comes to today's creations, the involvement of artisans, engineers, specialty manufacturers and a team of positive attitude individuals make the difference.
I consider myself an ambitious, passionate about civil engineering, very cooperative person, with experience in this domain. I have studied Civil Engineering at Technical University of Cluj Napoca, Romania, plus 3 years of experience in oone of the most powerful companies in the country in this branch.
A goal-oriented Design Engineer proficient in producing concept designs of downhole tools using Solidworks and Autocad. Specify, and progress these to fully constrained assemblies, detailed table and or equation driven parts and tolerance drawings complete with BOM, assembly procedures and operation instructions.
We are a group of licensed Architects, Civil Engineers and Quantity Surveyors in the Philippines with years of experience in structural design specially in the curtain wall business.
Since more than 20 years, I am designing electronic circuits and can offer you a wide range of electronic solutions. Surely I can not cope with any task, but I am not afraid to face new challenges, on the contrary.
Experience in Pro/ENGINEER (Creo) - 13 years, in SolidWorks - 5 years, in ArtCAM - 4 years, in CAD design - 18 years, in CNC programming - 9 years, in CAE - 7 years, in engineering - 18 years
My name is Sergei. I have a comprehensive knowledge and understanding of key subjects in mathematics. I have obtained my Diploma in Mathematics, Statistics and Financial Mathematics in 2014.
Civil engineer with experience in: - Individual/commercial/residential Building Design, - Masonry/Concrete/Steel Structure Design, - Water Tanks Design, - Building consolidation, rehabilitation and modernisation - Estimation of Buildings Works.
Versatile lead project engineer in substation design with prior professional experience in intellectual property law, mortgage sales, and entertainment. Skilled at communicating challenging technical information across groups of varying levels of proficiency. Eager to develop and implement solutions to problems that require lateral knowledge and a holistic thought process.
xxxxx I am an experienced, proven, electronics designer. I have successfully completed five electronics based, high performance product, programs. I was the lead designer and responsible engineer on each program and I led these design teams from the initial design phase, through rigorous preliminary and critical design reviews, and into the final production phase. The most notable programs included the MADL power supply for the JSF program, the AB350 PA envelope-tracking DC-DC converter for Rockwell, and the grid-tied inverter for Petra Solar. I received a letter of appreciation from Northrup Grumman's Chief System Engineer for my design of the MADL power supply.
Degree: Bachelor of Structural Engineering Qualifications: Structural/Civil Engineer Skilled AutoCAD drafters. We look forward to cooperating with you.
Since 2013 I have worked as freelance hardware developer and electronics engineer. My main focus is on circuit and PCB design, circuit simulation, microcontroller programming and soldering. I have worked with audio, radio reception and transmission, computer electronics, microcontrollers, Industrial Electronics, High Value Engineering, Tesla technologies and power supply. One of my last projects was design and development of an electronic thermometer. My client wanted to develop a new type of thermometer with LED display. I've written code using atmel language.
A seasoned Structural Engineer with a proven background of utilizing Finite Element Analysis, Computational Fluid Dynamics and analytical assessments to lower manufacturing costs, improve function, and bring products to market faster. Software packages used include Abaqus, Ansys, Patran, Matlab, Mathcad, Pro-Engineer, CATIA, Solidworks, and Visual Basic.
I am a young engineer with several years experience in civil engineering and underground works. I work for a company which designs and detail all the subway stations in Bucharest, and many underground works in Bucharest, like parking spaces and deep foundations for tall buildings. We have also did office buildings, stadiums,churches and big gyms. My work in computing all the project is done using Excel, Mathcad, Etabs, SAP 2000, Plaxis 2d and 3d, Midas GTS NX and Graitec Advance Design. For drawings I use AutoCAD, but I am also detailing in Graitec Advance Concrete and Advance Steel.
I am expert in English and french languages. I wrote academic proposal, articles and general assays for individual, edit and rewrite the body. I have translated some books to my mother tong in academic field and in general. I had many industrial experiences in more than 11 years in national and international cases. I participate in new and challenging unique work position. I did some projects using simulation software. I have a good knowledge in computer software and hardware connections. I am expert in calculating program listed in the skills and have a good background in engineering field. I have done 3D modeling and prepare the technical report. The most important are done by ANSYS and ABAqus, Matlab, mathcad and solidworks.
I'm the one who you want. My work can see in my portfolio (https://www.freelancer.com/u/SergSh2013.html?page=portfolio&ref_project_id=7303367). While talking in English is not very good, but I understand well and know how to model and good quality projects. Year of birth: 11/08/1988 p. Objective: "To work on myself," the chief engineer, engineer, engineer-designer-designer, project manager, the creation of 3D-objects and other positions with high salaries. Additional Information: Languages: Ukrainian - native; Russian - fluent; English - intermediate. Skills to work in software environments: MS Office, AutoCAD, Kompas, SolidWorks, PCAD, PhotoShop, CoralDraw, ArchiCAD, MatLAB, MathCAD, Google SketchUp and others. Advanced PC user! Personality: - Responsibility; - Determination; - Communication skills; - Initiative; - Punctuality; - Orientation of the result; - Willingness to learn and move forward; - Ability to work in a team
I am a mechanical engineer with experience and knowledge in mechanics (statics and dynamics), thermodynamics, fluid mechanics, machine design, failure analysis, power plant engineering, automotive engineering, electromechanical engineering, engineering drawing (AutoCAD, 3D Studio Max, Solidwords etc.), programming with MATLAB, Mathcad and C++. I have worked as a lead HVAC system designer engineer for years for industries, and am an expert in that field. I am also a columnist and a sub-editorial writer for a national English daily (googling my name Muhammad Eusha would show many articles I got published over time) in my country. I wrote regularly on social issues, national issues etc.
My basic aim is to provide CAD/CAM/Designing/Modeling/Analysis/Drawing services to the potential vendors resulting in knowledge & experience gain and, especially, deliver a high-quality work responsibly. I have vast knowledge of Fluid Mechanics, Heat Transfer, Applied Thermodynamics and Computational Fluid Dynamics. I have been designing and developing different types of machine tools and industrial equipments like pumps, vessels, valves and other industrial components. I am capable of reverse engineer existing equipment for the purpose of improvement of the design. The key responsibilities include; 1. Modeling/Designing using Pro/E, Autodesk Inventor, Solid Works etc. 2. Developing Production drawings using Pro/E, Autodesk AutoCAD, Autodesk Inventor, Solid-works etc. 3. Simulations and analysis of prototypes using Pro/E, Ansys, MatLab, Autodesk Inventor, CF Design, Gambit.Fluent etc. 4. Structural & Thermal Analysis using Pro/E, Ansys etc
Hi, I have 10+ years experience in Power Electronics, Motor Drives, Motion Control, Instrumentation, LabVIEW, Test Fixture Development, Ultrasonics, Piezoelectric Sensors. Starting from a mathematical model, I have the ability to implement Real Time Control on a Texas Instruments DSP and Industrial PCs as well as sourcing cost effective suppliers gives you an edge. I use Open Source (GNU) software whenever possible so as to reduce your future development costs. If you want advice from Gurus (Nobel prize or Near that level), it can be arranged as well! Thank you, Rahul
I am currently a Field Engineer working for one of the largest Oil & Gas companies in the world. I enjoy working on the side in programs such as Microsoft Excel, MathCAD and AutoCAD.
I am a dedicated young civil engineer with strong practical and technical skills. Strong knowledge about steel , reinforced concrete , masonry and wooden structures Ability to read and understand complex drawings. Ability to review drawings for construct-ability. Ability to revise or create drawings to resolve issues Capability of accuracy and flexibility. Excellent problem solving capability. Knowledge of basic electrical design/construction (basic conduit, supports, boxes) Knowledge of basic mechanical design/ construction (pumps, valves, piping). AutoCAD 2008/2010/2013 (Proficient -2d, 3d, including the rendering process) MathCAD (Proficient) , ETABS (Proficient) , Nemetschek-Allplan (very good knowledge of 2d,3d/allplan engineering and architecture module) , Scia Engineering (good knowledge) MS Office (very good knowledge)
Courtney James is an innovative and experienced mechanical engineer and project manager currently residing in Charlotte, North Carolina. He has over 12 years of industry experience in research and technology development in the motion control, laser printing, and aerospace sensor sectors and 4 years of teaching and applied research experience as an associate professor in the College of Engineering at U.N.C. Charlotte. Dr. James' technical skills include electro-mechanical system modeling, mechatronics, control systems, robotics, mechanisms, project management, and vibrations. He is proficient with Matlab, Simulink, dSpace, and MathCAD, as well as SolidWorks computer aided design (CAD), NASTRAN / ANSYS finite element analysis (FEA), and Fluent computational fluid dynamics (CFD). Dr. James holds U.S. Patent #5,481,142 for the application of tuned vibration absorbers to pole-noise attenuation in AC synchronous motors. In addition to holding a master's and a doctoral degree in mechanical
A postgraduate with interest in internship or full time position in an industry where I can apply my interests in product design, manufacturing and process excellence to work, thus building upon the skills I have acquired. I am an avid learner, enthusiastic, motivated and ready to take on any task. Specialties: Ã¢ÂÂ¢Computer skills: C++, Java, Matlab, Mathcad, PSpice, AutoCAD, Xilinx FPGA, DaiLUX, Ducab, Tally, MS Office, MS Visio, MS Access SQL Ã¢ÂÂ¢Operating Systems: Windows, MAC, Linux, Labview
Degree in Aeronautical Engineering with some skills in Computational Fluid Dynamics. Used/Proficient at SolidWorks, MathCad, MATLAB. Currently Aircraft Structural Engineer.
Specializes in Design of Residential, Commercial and Industrial Buildings. Expertise in CADD Software i.e. ArchiCAD, AutoCAD, MathCAD, SketchUp, Staad.Pro, Autodesk Robot, SAP2000,MS Office, RISA-3D. In-Depth Knowlege of Codes & Standards i.e. ASTM, ACI, ASCE, AISC, EC, IBC Can provide Services for Building Design, Structural Modifications, Estimation/Quantity Take-Off, Project Scheduling, Tender and Construction Documentation.
Completed Mechanical Engineering (BASc.) at University of Waterloo in April 2013.
I'm master of science, graduate student and tutor of Physics. My major is nuetron and elementary particle physics. MathCad, Maple, Excel, PowerPoint, C#, Fortran, Trinslation English-Russian, Russian-English.
Hello, my name is Valentin and I'm a structural engineer. Over 6 years experience in Civil and Industrial engineering, structural design and calculations. I use Revit Structure, Robot Structural Analysis, Mathcad and Autocad. RC and steel structures design.
Mechanical engineering graduate from Imperial College London looking for CAD/Excel Projects
As a design and project engineer performed conceptual and detailed design, fabrication support, test procedure and test tooling design and fabrication support. My responsibilities have included engineering projects through all phases. This includes research, scope development and preliminary and detail design. These design efforts, typically multi-disciplinary in nature, were guided from the concept phase, through proposal preparation, estimating and budgeting, concept validation, preliminary and final design, fabrication, MRB activities, assembly, first article and production testing, and troubleshooting in the field. As design and project engineer, I was responsible for monitoring and tracking the progress, and reporting to management and the client. I am a proficient user of AutoCAD, Solidworks, MathCAD, MS Excel, MS PowerPoint, MS Word.
Certified specialist in Dynamics and Strength of Machines, Robotics and complex automation Faculty, Moscow State Technical University of Bauman, Moscow, 2011. I have experience work in the next software: CATIA, Solid works, Inventor, MathCAD, AutoCAD, KOMPAS, Altium Designer, Visual C++ (including MFC), C, CodeVisionAVR, Adams, UMlab, Ansys, SPlan,MS Office. I have the Diploma of Laureate "Russian competition of scientific-research projects for the benefit of the Armed Forces Russian Federation" which got from minister Armed Forces. Also my designed project underwater boat on three person got prize place on CAD competition in Bauman Moscow State University. I can: programming microcontrollers (AVR, STM,TI and PSOC from CYPRESS) and software, design construction and electrical circuits, calculation strength of structures. Responsible and hardworking person, good decision making, engineering and communication skills.I have many finished projects.
A work focused , Enthusiastic professional
Student at Faculty of Civil Engineering in Foreign Languages (English) in Bucharest. Very good Structural Engineering related knowledge, 2D CAD drawing, MathCad, Microsoft Office, added to excelent English skills. Certainly, my strongest quality is seriousness.
Sr. Electro-Mechanical Design/Test Engineer Extensive experience in: Â Hardware design and development Â Software development for test and evaluation Â Project management Â Motor Control -- Brushless & stepper motor driver systems Â Disk Drives Â Shock and Vibration Test Systems Â Acoustic Test Systems Interested in: Â Green engineering involving Electric Vehicles and/or wind energy Â Designing Brushless DC motor & controls Â Robotics, control systems, and motion systems Â Automated R&D or Production Electromechanical Test systems Â Photography & Videography Specialties: Â Electromechanics Â Instrumentation Engineer Â Brushless Motors and Drives Â Test Hardware for Mechanical and Electronic Systems Â Test Software LabVIEW, MiniTab, Excel, MathCAD, Matlab, SolidWorks Â Production Test Development Automated Test Systems Â Six Sigma Brown Belt training Â FCC General Radio Telephone License
B.S. in Mechanical Engineering M.S. in Engineering Management in progress Currently employed as a Mechanical Engineer / Project Manager Experience with AutoCAD, Solidworks, Inventor, MathCAD.
- Expert in designing, analyzing and optimizing Millimeter-wave antennas incorporating EBG, FSS, Metmaterials structures for Gain Enhancement, Electronic Beam Steering, Pattern Diversity, ESPAR, mutual coupling reduction in MIMO Systems. - In-depth understanding of RF network simulation and design as well as validation and analysis of data collected from the field in comparison to theoretical models. - Experience with industry standard design tools including Ansoft HFSS, CST Microwave Design Studio, ADS, MATLAB, Atoll, MapInfo, Windcatcher, MathCad, and the Microsoft Office Suite. - Demonstrated hands on expertise with RF lab equipment including network analyzers, spectrum analyzers, radio communication test sets and EMC measurements. - Experience with In house PCB Prototyping ( LPKF protolaser S , protomat C60 ). - Background in networking technology such as Routers, Switches and Protocols: 802.11, -GSM/GPRS/EDGE, UMTS, CDMA/EVDO, HSPA, GPS and Bluetooth. - Proficient in LAN/WAN Desig
More Than 5 Years of working experience in Electronics Hardware Design for the automotive industry. Current Position: Hardware Lead Design Engineer Automotive Customers Involved: Nissan, Ford, Mitsubishi and Dongfeng Motor Electronic Products Involved: Integrated Power Distribution Module (IPDM), Body Control Module (BCM), Smart Junction Box (SJB). Proficient in the following Fields: 1) Electronic Schematic Creation 2) PCB Creation 3) WCCA - Worst Case Circuit Analysis using MathCad 4) OrCad/pSice/LTSpice - Electronic Circuit Simulation Tools 5) DFMEA- Design Failure Mode and Effect Analysis 6) FTA- Fault Tree Analysis 7) SPA- Sneak Path Analysis 8) RPA- Reliability Prediction Analysis 9) HITS - Hardware Interface Technical Specification 10) EOL - End Of Line Documentation for manufacturing. 11) BOM - Bill Of Materials for manufacturing Previous Experiences: 1) Board Repair Engineer in Semiconductor Industry. 2 years working experience.
Hello! Thank You for viewing my profile. I believe my strong points are my Creativeness and Punctuality. My #1 goal will always be to meet your needs and deadline. When working on a new project, I like to speak with the client, so that I can have a clear understanding of his/her needs and vision of the project. I'm honest and fair. Since 2007, I've worked as engineer in aircraft projects, solving problems in life support systems. I have rich experience in calculation of optimal parameters for hydraulic and pneumatic systems. Also starting from 2011, I developed some e-readers and tablet PCs. I created the concept and implemented it throughout full life cycle of a product. I have a Master's Degree in Aircraft Engineering from National Aviation University, Ukraine. See my skills listed below. CAD: SolidWorks, CATIA, Autocad, NanoCad; Math: Matlab, MathCad, Simulink; CAE: Mechanical Analysis, Stress Engineer, CFD; OS: Linux, Windows; Product and Project Management
I am a experienced in the design of mechanical equipment, using AutoCAD. Also have extensive experience in the design of bulk handing conveyors.
Mechanical Engineer with a cross functional experience in the Power generation / Energy sector spanning across Product design, Reverse engineering, Cost analysis, Proposal engineering and Technical consulting. Specialized in the Mechanical design of high voltage rotating electrical machines including 2 poles & 4 poles turbogenerators ranging from 10 MVA upto 150 MVA, hydro generators over 6 poles upto 60 MVA, Induction and synchronous motors for industrial applications upto 25 MW. Experience in performing cost planning, estimation of project cost matrix & techno-commercial proposal engineering of complete MBOP equipments for hydro power plants across India and South East Asia. Working experience gained in the process of heat treatment with specialization in the process of gas carburization, normalizing and annealing with close monitoring of the micro structure of carbon alloy steel forgings. Led teams on tasks such as technical evaluation of subcontracted jobs, vendor assessme
CADWorx 3D Plant and Piping Designer and Caesar II Pipe Stress Analysis. Knowledge and experience in using CAESAR II Stress analysis software for high temperature application using expansion loops, joints, piping supports, spring hangers and other means of accommodating various load cases and thermal expansion. Utilize applicable code standards such as: ASME B31.3, ASME B16.5 and ASME Sections I & VIII and API, ANSI, MSS, API 579, ASME B31.1 and other company specifications and design standards. Knowledge and experience in using CAEPIPE, Mathcad and Smart Plant review software for piping design. Able to Multi-task to maintain contributions on schedule for several projects simultaneously. Able to communicate well with suppliers in both written and verbally and work well in a team environment. Capable for entire site stress analysis procedure including complex oil production and steam injection equipment and assemblies. Deliver schematic stress analysis model and summary reports.
I have Master degree in Civil/Structural Engineering and several years of experience in Structural Engineering. I can do load take-down on structures, statics (statically determinate and indeterminate structures) and structural design calculations for steel, reinforced concrete, timber, masonry. I can also prepare AutoCAD drawings.
Over a decade of real, electronic industry product development and engineering experience. High volume products in areas of Instrumentation, Digital Control, Power Electronics and Electronic Instrumentation (Semi and Data Storage manufacturing equipment, Telecom, Motion Control and Industrial Electronics). Entire product development process: specifications, engineering, prototyping, debugging, testing, obtaining agency approvals, pre-production, production support... Digital control: DSPs (TI: C2, C5, C6; ADI: Blackfin), microcontrollers (TI: MSP430; Intel: 8 and 16 bit), ADCs (up to 100MSPS), DAC, FPGA, graphics, USB, RS-xxx, I2C, SPI, UART, DDS, low noise oscillators... Software: C, C#, Basic, Fortran, Assembly... Design tools: simulation (Pspice, Microcap), finite element: thermal, magnetic and electrostatic field, Mathcad, PCB... Ability to take your product from early definition to high volume production.
Master`s Degree in Electrical Power Engineering, Mechanichal Engineering, 3D Modelling, Design. I use AutoCAD 2015, Solidworks 2014, Visio 2010, MathCAD 14 etc. In the present I work with Draexlmaier Automotive Group, eTelecom International, gasNatural Fenosa and another big and small companies. Guarantee for all clients good quality of work for resonable price and terms.
1. Implementation of drawings in SolidWorks and KOMPAS-3D; 2. Mathematical modeling in the environment MathCAD. 3. 3D modeling programs SolidWorks, WinMachine and compass. 4. The solution of problems in the theory of machines and mechanisms. 5. Design and construction of parts, components, assemblies, structures to the requirements of the customer.
View my linkedin profile here: http://www.linkedin.com/in/mechejentran Summary: My name is Jen Tran, and I am an MIT mechanical engineering graduate with industry experience (Fortune 200) as a design engineer. My focus is in Product Development. I am an organized self-starter who can work just as well independently as I can in a cross-disciplinary team, and my affinity for entrepreneurship drives me to take an active role in what I do. Communication and documentation is important, and I make my work and collaboration transparent to the team, so everybody is on the same page. I am also experienced in project management from various engineering and non-engineering endeavors as well and would not be afraid to take the lead in such a position. I would love to help you CAD up your product idea, consult on ideas, or assist in any other product development/engineering endeavor.
I have over 20 years of experience in 3-D Modeling, Autocad Inventor and SolidWorks.
Designed panels, PLC code, and HMI code. Designed embedded HW and FW, system architecture, schematics, and boards. Designed embedded commercial, automotive, military, and medical devices. Designed FW with IAR, Eclipse, GNU/GDB, MPLABS, CodeWarrior. Designed AC/DC and DC/DC supplies, and battery chargers Designed HW with Orcad, PADS, Allegro, Eagle, ViewDraw, Mathcad, and Hyperlynx. Designed using 68332, 68HC11, x86, PowerPC, SH7760, PIC, AVR, ARM, MSP430. Designed FPGA, CPLD, and EPLD devices using VHDL, Synplify, Xilinx, and Altera tools. Designed up to 32-bit embedded systems with up to 12-layer boards. Simulated boards. Designed SW with C, Python, and Bash/AWK/SED. Utilized PVCS, TLIB, CVS, SVN, and git version control systems. Took products through regulatory testing at UL and TUV. Managed HW and FW engineers. Evaluated requirements and wrote proposals. Mentored / Trained Engineers and Executives Authored magazine article
Experienced mechanical design engineer. Technical background with broad set of skills and experience. Can help with producing computer models and working drawings. Able to manufacture complex pneumatic control systems. Experienced with designing systems and machines for many industrial sectors.
Structural engineer with diploma, working buildings design since 2004. Good knoledge of Autocad, CSI ETABS, CSI SAFE, MATHCAD, EXCEL.
Job-related skills: Circuit theory and practical usage. R&D. Layouting designs with: DDR, RF, analog/digital circuits, SMPS, interfaces (USB, gigabit Ethernet , PCIe, POE, RS232, RS485, MBUS,MODBUS, CL, ..), opto/magnetic couplers. Experience with CE, Âregulation of electronic communications activitiesÂ certifications. Familiar with IPC standarts. Embedded programming, ARV 8bit controllers with asm, C. Knowledge and experience about vehicles electronic. Â1. Projecting, 2. Soldering, 3. Burning, 4. goto: 1Â hobbing experience. Computer skills: PCB layouting: Orcad 10.5, Cadence 16.3, Altium Designer 15, Cam350.10.7, Gerbv, LP Wizart, Saturn PCB. Microcontrollers: CodeVisionAVR, IAR, Keil. Circuit simulation: PSPICE, PROTEUS Other (basics): MathCad, MatLab, Ubuntu, Eclipse IDE, OpenOffice, AutoCAD.
I am mechanical design engineer. I am graduated Technical University at Sofia - Bulgaria Precision Engineering , Faculty of Mechanical Engineering Feeling comfortable to work with different developers teams all the time. I have experience in 2D and 3D design and modification of plastic, metal and sheet metal parts and assemblies. Stress analysis for reduce cost and time to market by testing designs Collision Analysis and design driven solutions Prototypes design Design of injection molds, punching tools, dies, casting tools for technical ceramics Software in use: Microsoft office; AutoCAD; Solidworks; Mastercam; Catia V5; MathCAD. Software in study: UGS NX;
Engineering Designer, specializing in structures. Very proficient in Microstation, AutoCAD, Solidworks, MathCAD, and many other programs.
I have successfully implemented projects with budgets of more than 100 million rubles, and directed teams of more than 25 people as their chief project manager. I give my full attention to the task at hand to ensure that work goes smoothly, and follow through until its successful conclusion. Developed a smooth and efficient line of communication within the team. IÂm organized, self-driven person with strong motivation for personal and professional skills development. Experienced with software such as: AutoCad, Kompas 3D, MathCad, Microsoft Office, and others.
I am specializing in mechanical design engineering, 3D modeling and thermal/stress analisys. My experiense is more then 5 years of steam turbine design for thermal and nuclear power plants and energy companies. It includes structural design solutions, 3d modeling of parts and assemblies heat balances, thermal and stress caculations, technical offers and project documentations. I'm using SolidWorks, CosmosWorks, Autocad, Compas 3d, MathCad, Excel, AxStream, turbine design software.
Hello. I am a mechanical engineer, specialized in new product development. In the last two years I have been a numerical analysis engineer and I have been involved in several structural and fluid dynamics projects. My area of expertize covers: design calculus, 3D&2D modeling, tolerance calculations, GD&T, ASME, ISO, EN, structural analysis (static, dynamic, linear, nonlinear, vibrations, fatigue, failure criteria, NVH), fluid dynamics (fluid models, turbulent flow, HVAC, FSI) The software that I use confidently: - for modeling: NX, SolidWorks, SpaceClaim - for analysis: ANSYS Mechanical, APDL, CFX, Fluent, SolidWorks, PointWise - for calculus: Matlab, Mathcad, Excel - data analysis: Matlab, Labview, Excel
I know such PLC and SCADA as: SIEMENS SIMATIC (S7-1200, S7-300, S7-400, SCADA WinCC), ScadaPACK, Schneider Electric, Allen-Bradley (1759 ControlLogix), SCADA: B&R Automation Studio. Programming languages: Delphi (+RAD Studio), MySQL, MathSoft (MathCAD, MathLAB), Latex. Commissioning gas pumping plants.
I am a mechanical engineer with 8 years of experience in design, manufacturing, and engineering data analysis. I have vast experience with all major 3D modeling programs as well as computational software such as Excel, Matlab, MathCAD, etc.
Instructed Building Information Modeling (BIM) tools such as Revit Architecture, Revit MEP and NavisWorks. Provided consulting for clients on BIM management, implementation and processes. Proficiency in AutoCAD and MicroStation with several year proven work experience in design & drafting of HVAC, plumbing/piping and fire protection systems Capable of creating high quality 2D and 3D drawings; specializing in Mechanical design Experience with projects for institutional, industrial, provincial and municipal clients Strong understanding of BIM management, collaboration amongst disciplines and implementation of Revit standards and templates. TECHNICAL SKILLS: Working knowledge of Revit, AutoCAD MEP, Autodesk NLM, MicroStation, ProjectWise, SolidWorks, Solid Edge, Catia, SketchUp, MasterCAM, MathCAD, Automation Studio, AutoLisp, MultiSim, CADKEY, Adobe Acrobat, Photoshop and Corel Draw Proficient in use of Microsoft Office p
Hands on engineer with 18+ years experience in the design and analysis of mechanical components and systems. Several years experience in the design of mechanisms and expert in the field of PZT based actuators. Expert in dynamic and stress analysis of structures using NASTRAN and MATLAB. Â 18+ yrs exp. in the design of space flight structures and deployment mechanisms Â 15+ yrs exp. in the design of PZT actuators and mechanisms Â 15+ yrs exp. with Solid Works 3D modeling including full drafting Â 18+ yrs exp. performing stress and dynamic analysis for space flight structures and mechanisms Â 18+ yrs exp. And expert in FEA using NASTRAN Â 15+ yrs exp. And expert with MATLAB, Simulink, and MathCAD Â Experience in random vibration and non-linear analysis Â Expert user of EXCEL for creating design spreadsheets to perform trade studies
A Civil Engineer . Graduated from UTCB -Universitatea Tehnica de Constructii Bucuresti- Department of Civil Engineering in English Language . Skilled at : -Autocad -Etabs -Solidworks -Microsoft Excel -Mathcad
Ingeniera MecÃ¡nica, interesada en trabajar en variedad de proyectos, con oportunidades de desarrollo profesional y personal, donde se fomente la innovaciÃ³n y la capacitaciÃ³n. Con conocimientos en el Ã¡rea de automatizaciÃ³n, controladores programables y diseÃ±o mecÃ¡nico. Estudios orientados a las Ã¡reas de automatizaciÃ³n industrial, neumÃ¡tica e hidrÃ¡ulica; diseÃ±o mecÃ¡nico de piezas, recipientes a presiÃ³n, instalaciones mecÃ¡nicas y sistemas de tuberÃas; y el Ã¡rea de acÃºstica y control de ruido. Manejo de Software - DiseÃ±o: SolidWorks, Inventor, AutoCAD, CES EduPack, EPANET y HEC-RAS. - AutomatizaciÃ³n: Automation Studio, Simens LOGO!Soft, STEP 7-Micro/WIN y Indusoft. - CÃ¡lculo: MathCad y MATLAB. - GestiÃ³n de Proyectos: OpenProj y Microsoft Project. - Lenguajes de programaciÃ³n: Java y RPL. - SimulaciÃ³n de procesos: PRO II y CyclePad. - Editores: Microsoft Office, Visio y Prezi.
MSc and BSc in chemical engineering, having experience and expertise in industrial safety, risk assessment, risk analysis, consequence modelling, SIL verification, active and passive fire protection for oil and gas and chemical industry. Have working experience with relevant standards of API, NORSOK, ISO.If you are looking for help in your project, I can help you. I have experience in designing PFD, P&ID, Material and energy balance for chemical industry and academic research experience in @Risk, Mathcad,CFD (ANSYS CFX, Openfoam), Matlab, Statistics R, Numerical simulation. Have experience and interest to do any Microsoft office, Autocad, Technical writing or Blog writing project. Have multilingual capacity in English, Bengali, Norwegian and Danish.
Mechanical strength engineer of aviation and power gas-turbine engines. Wide experience of work in versatile areas of mechanical calculations including with foreign partners. Perform various mechanical calculations: - static and dynamic strength and life, - modal and buckling analysis, - cracks grow analysis, et al. Advanced PC user. Excellent in: - ANSYS Mechanical (Workbench and APDL + writing macros), - DARWIN and FRANC3D (software for crack simulations), - MS Office (Project, Power Point, Word, Excel + VBA scripts). Great experience with: - Code_Aster and Salome-Meca (FE mechanical simulations), - LS-Dyna (simulations of dynamic processes), - NX and AutoCAD (3D and 2D modelling), - Mathcad (mathematical solutions of problems). Developer of programs for mechanical calculations (APDL, VBA and Python language).
- 15+ yrs exp. in the mechanical design - 15+ yrs exp. performing FEA analysis using NASTRAN - 10+ yrs exp. in the design of Piezoelectric (PZT) actuators - 10+ yrs exp. with Solid Works 3D modeling/drafting - 15+ yrs exp. with MATLAB, Simulink, and MathCAD - Experiance in random vibration and non-linear analysis - Vast testing experiance including vibration, thermal, mechanical deployment, electrical, precision metrology - Expert in stress analysis, dynamic analysis, modal analysis - Expert user of EXCEL, Word, and PowerPoint
Design Projects and Simulation in ABB DOC, Matlab, Mathcad. Design electrical and electronic schemes. Power electronics, AC/DC (rectifiers & inverters), control systems. Electrical Drive, Automation, Electrical motors and Drive systems, Brushless systems of large generators and motors. Protection Systems. Non stationary conditions equipment and power systems, stability of Power Systems. Excitation systems.
Over 10 years of experience working for a large A&E firm on Municipal, Commercial, Industrial, Power, Transmission and Distribution, Wastewater treatment, airport and military projects. Responsible for project management, proposal writing, scope of work and contract preparation, budget estimating, Bill of materials and quantity takeoff, concept design, master planning, QA/QC and site works. Structural analysis and design experience with structural steel, concrete, masonry and wood for structures including highway and pedestrian bridges, utility tunnels, wood and steel decks and platforms, friction and end bearing piles, large equipment foundations, concrete tanks and utility vaults, retaining walls, steel fuel storage tanks, warehouses and aircraft hangars, etc. Software background highlights Google SketchUp Autocad Mathcad Staad SquareSpace Shopify Google Analytics and Adwords MS Office
Over 20 years experience developing solutions to challenging mechanical design problems for clients including NASA, the US Navy, and commercial customers. Experience with SBIR funded programs, including proposal development, followed by successful execution of research program to deliver functional product, new intellectual property and licensing of same to domestic manufacturer. Skilled with design software, including Autodesk Inventor, Ansys Workbench, AutoCAD, MathCAD, MS Project
Equipped with a doctorate degree in mechanical engineering and 7+ years of hands-on professional experience in the US and abroad. Quickly master new technologies and methodologies to ensure the success of complex engineering initiatives. Demonstrate outstanding analytical and problem solving aptitudes. Apply strong interpersonal and communication skills to work effectively with diverse individuals and personalities at all levels of an organization, internally and externally. Possess broad knowledge of codes, standards, and recommended practices related to mechanical design and integrity. Detailed data analysis and computer modeling/ drawing with GD&T (SOLIDWORKS, ANSYS, Mathcad, Mathematica and AutoCAD).
Background in applied mechanics, computational modeling and simulation. I specialize in providing mechanical component design and optimization. Experience working with aluminum alloys, steels, and composites.
- Professional Engineer with extensive experience in providing solutions involving design, manufacturing and testing of a wide range of mechanical engineering systems. - Computer skills: SolidWorks, SolidWorks Simulation, SolidEdge, Pro/Engineer, ANSYS Multiphysics, AutoCAD, MathCAD, STAAD Pro, Pascal, Visual Basic, MS ÂWindows, MS-Office.
Engineering and Music have been a part of my studies and professional work since 1990, and I am passionate about: - audio signal processing; - architectural acoustics; - digital audio theory; - software development; - audio recording technology; - teaching. These topics have been integral part of both my professional and academic experience. I have also a solid music performance and composition education, that is the natural complement to my training.
Bondariev Dmytro 27 years old Education: Mechanical Engineer, National Aviation University, ÂKharkiv Aviation InstituteÂ, 2012 Work experience: stress engineer (manual bracket's static stress analysis, 3D modelling, FEM analysis) Computer skills: SolidWorks, Kompas-3D, MS Excel, Mathcad, MSC.Patran/Nastran English: pre-intermediate