Freelancers

Freelancers by Skills

1-100 of 262 Professionals
Freelancers
Chemistry and Pharma expert

PhD in Organic Chemistry. 8 years of experience in university labs. Over three years of experince in private institutions R&D (1 year in cosmetics and domestic chemistry, 2 years in organic and medicinal chemistry).

Poland, Malopolskie, Krakow | Engineering & Manufacturing | Rating 5.0 (17 reviews)
Senior Chemist,Chemical Engineer

I am graduate in Chemistry ( M.Sc,M.Phil) Organic/Analytical having more than 16 years of strong practical and theoretical knowledge in the multidimensional relevant fields with the working in private sector i.e. Research and development, Synthesis,Fuel formulation,Cosmetics formulations, Lab Analysis, technical project and report writing and subject teaching expert

Pakistan, Punjab, Rawalpindi | Engineering & Manufacturing | Rating 4.4 (2 reviews)
Petroleum Engineer

I am looking forward to being hired by you for all your Well Engineering, Geology, Reservoir Engineering and Scientific Research jobs. Knowledge of software like COMPASS,WELLPLAN, Decision Space Well Engineering, Weatherford Pan System, PROSPER,GAP,Ecrin Saphir etc. I am ready to be hired by you and start work today.Beside this i also work for AutoCAD Engineering Design etc.

India, Gujarat, Rajkot | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reservoir Petroleum Oil & Gas Engineer

Eighteen years of reservoir engineering experience with a consulting firm and two international company. Areas of technical expertise include reservoir surveillance, production optimization, field development planning, field operations, reserves management, economic evaluations, reservoir simulation modeling, probabilistic modeling, rate and pressure transient analysis, well testing, production logging, and database management. Experienced in technical evaluations to support projects such as general property appraisals, detailed in-depth full field economic analysis (including reserves depletion forecast, infill vertical or horizontal development drilling, identification of workover & behind pipe opportunities), exploration studies, annual SEC and Canadian NI-51-101 filings, initial public offering (IPO) filings, court testimonies, project feasibility studies, property acquisitions and divestments, financial lending qualifications and bank reports, gas deliverability modeling, patter

United States, Texas, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Chemical Engineer

I am a professional Process Engineer with more than 7 years of experience in Process Engineering, Plants and Equipment design, Plant Operations excellence, Process Safety, Commissioning and Normal Start-ups of Ammonia/Urea based Fertilizer industry as well as in Oil & Gas sector. Worked as an Associate Professor in well known University of the country. Taught core Engineering subjects and assisted number of final projects,mini projects and in assignments of students related to any discipline included in Chemical or Petroleum & Gas Engineering.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer specialising in Oil and Gas

I am a mechanical engineer with several year?s experience currently working for a large oil and gas company located in Aberdeen. I have a solid grounding in project management, 3D CAD, technical writing, integrity management, engineering design, non-destructive testing and renewable energy (mainly solar). I graduated a top 10 UK university with 2.1 (hons) in 2011. I can assist in the writing or reviewing of technical documents and general copy writing as well as assisting with engineering design. I can also assist with materials selection, stress/strain calculations and 3D CAD modeling.

United Kingdom, null, Aberdeen | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil Engineer , Civil Designer, Structural

As a lead Civil and Structural Engineer as well as Project Manager, I provide Structural Analyses and Design of various structure. Structural Steel 3D modeling, erection and fabrication shop drawings are just few of my skills included in my scope of work. Years of experience in Oil and GAs industries made me to a specialist in all kind civil and mechanical designs (API 650-620 Tank Foundation. supports for piping, Equipment found., El. Substations, Pump Stations, VALVE and Drain Pits, Culverts-Roadcrossings, Anchorblocks,... and so on. Software that i use are: Tekla v18 -3D steel modeling and detailing - active Prosteel v8i -3D steel modeling and detailing- active Bentley Staad -structural analyses- active Sap 2000 --structural analyses- passive Radimpex Tower 6 -structural analyses - active Radimpex Armcad - reinforcement drawings Design codes i use most :

Bosnia and Herzegovina, Sarajevo, Sarajevo | Engineering & Manufacturing | Rating 5.0 (4 reviews)
Mechanical & Building Services Engineer

BEng. Mechanical & Energy degree holder with 3 years work experience at an international specialist engineering services provider. Proven to be a motivated individual with strong aptitude for engineering given rapid career development to date. Interested in all types of mechanical and building services freelance work.

United Kingdom, Scotland, Edinburgh | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Petroleum Engineer

Highly motivated Petroleum Engineer with experience in designing, developing and maintaining Oil & Gas systems and components to required specifications, focusing on economy, safety, reliability, quality and sustainability.

Nigeria, Federal Capital Territory, Abuja | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering Services to the Oil and Gas Industry

Why hire Jabali Engineering? Your firm may require engineering muscle power for that one (1) skid package, or that one (1) maintenance project, or an evaluation of a flare system. Or perhaps someone to stick around for awhile, or maybe you require some other engineering solutions. We can provide solutions to your needs as you require it. You can finally get some part time engineering fire power. Here are some testimonials: "Will worked for TG Engineering twice throughout his career. He's always tried his very best to meet deadlines and client requirements. He's open to feedback, values integrity, honesty, and quality work. I would recommend him for almost any job" TG Engineering Calgary, Canada "Worked with Will in the past and he is a very skilled and determined individual who always give his best effort on every project" Production Engineer, Encana Calgary, Canada

Canada, Alberta, Calgary | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Pipe Stressing Engineer, Mechanical Engineer

BE Mechanical Engineer with 7 years in Oil & Gas EPC, including wellsites, plant piping and cross-country pipelines,. 1 year structural steel detail drawings, procurement, fabrication and install. 9 years in Satellite Communications space networks interference analysis, slot protection and spectrum management, 5 years in Preventive Maintenance of heavy machinery, install, maintain stone crushers and screening plant. Can perform independent piping stress analysis for any plant piping or underground pipelines. High pressure piping and pipelines. Can work from piping hand sketches with your dimensions and can do stress analysis and pipe support design for your projects to ASME, AS, BS or other standards.

New Zealand, Taranaki, New Plymouth | Engineering & Manufacturing | Rating 0.0 (0 reviews)
25 years Forensic & Design Engineering Experience

Mr. Rose has more than 25 years experience in the design and failure analysis of components and equipment in the water, wastewater, chemical, and petroleum industries including hundreds of forensic cases. His expertise covers consumer and industrial sectors including household appliances, water filters, water softeners, expansion tanks, fire sprinklers, boilers, cooling towers, oil & chemical storage tanks, pressure vessels, conveyors, power transmission components, large pumps, and all forms of piping. He has designed major components, equipment and miles of piping subject to extreme environmental conditions for large chemical, petroleum, and wastewater treatment plants in every state in the U.S. Additionally, he has extensive training and experience in material science with focus on failure analysis including fracture surface analysis (fractography), metallurgical failure analysis, plastic failures, paint & coatings failures, and corrosion.

United States, AZ, Tucson | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer Design Oil and Gas, Machinery

We keep the work on moving, we are a team of Mechanical Engineers at different timezone, that means that our work never sleeps in order to serve you better and to deliver as early as you have expected. We are highly inclined mechanical engineers in the track of oilfield equipment, and in automation industries. Seasoned through mechanical design, fabrication and installation or EPCI (Engineering, Procurement, Construction and Installation). Involves various FEA (Finite Element Analysis) and testing on mechanical cases of machine members for highly efficient and low-cost. Research and development for new and effective design for the industry.

Philippines, Central Visayas, Cebu City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process, Controls, Automation, Electrical Engineer

I have over 29 years of Process Control, Robotics, Controls & Automation and Safety experience in the automotive, petro-chemical, water treatment, food & beverage, mining, steel, postal service, HVAC industry, etc. I have worked on and managed large projects from $1 - $10 Million in Canada, the US, Mexico and the Middle East. I have extensive experience in electrical engineering, project management, process control & controls design, PLC & SCADA programming, safety, integration, troubleshooting, start-up & training. Areas include: automated assembly, dust collection & HVAC systems, injection molding, metalizing, material handling, automated gluing, automated welding, automated painting, chemical mixing systems, DAF clarifiers, separators, dust collection systems, process control, instrumentation, energy management, blow molding, gluing, food processing, cutting, extrusion, welding, melting, drilling, packaging, palletizing, smelting, stamping, steel rolling & inventory control.

Canada, Ontario, Fenelon Falls | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process Engineer,Chemical Engineer

I am a Graduate Chemical Engineer having experience of working on Crude distillaiton, Vac. distillation, propane deasphalting, Furfural extraction, MEK dewaxing, Propane recovery and hydrogen generation.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering Consultant

I am a petroleum engineering consultant. I have over 8 years of experience in the oil and gas industry. My specialties include drilling operations, drilling fluid management, waste management and project management.

United States, TX, College Station | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Completion, Work over & Rig less Engineer

I am a qualified Petroleum Engineer, (M.E Petroleum), I always focus in time completion of task as well as how to improve the practice with less time and expense, having experience in various disciplines of Petroleum Engineering in Production Operations, Work over Operations, Well Testing and Well Completions, Coiled Tubing, Wire line & Slick line Job, I can contribute to the growth of the company. A team leader with strong focus on Health, Safety & Environment

Pakistan, Sindh, Hyderabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Petroleum Engineer

Petroleum Engineer with a master of science degree within process engineering. I offer engineering guidance within petrochemical and mechanical engieering for a low hourly cost. I will follow up your projects with weekly updates on progress and deliver quality work on schedual.

Norway, More og Romsdal, Molde | Engineering & Manufacturing | Rating 0.0 (0 reviews)
energy/petroleum engineer

energy/petroleum engineer

Tunisia, Tunisia, El Fahs | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Petroleum engineer with wide & diverse knowledge.

I am a petroleum engineer with 6 years experience in oil & gas field. Exceptional technical knowledge in Geopolitics, Petroleum engineering & geology. Knowledge of M.S tools, technical writing logo designs etc

India, Andhra Pradesh, Hyderabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
petroleum engineer

i am a petroleum engineer and have good skills to tackle with any kind of problem and have command over english...

India, Uttarakhand, Dehradun | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Petroleum Engineer Chetan

I am a Petroleum Engineer. I have done my graduation from Pandit Deendayal Petroleum University Gandhinagar, Gujarat India. I am currently working in Gujarat Alkalies and Chemicals Ltd. as a Shift in charge of the plant. My responsibilities includes but not limited to: To prepare daily stock and production reports and submit it to my seniors, to guide my co operators for the safety prior to startup of the plant, to maintain the work permit and safety permits, to attend the maintenance work or abnormality arises in the plant, man power management, to deal with other engineering departments like civil, electrical, mechanical etc.

India, Gujarat, Bharuch | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Young Professional Petroleum Engineer

Im a young professional Petroleum Engineer with a gas Engineering Master Degree and many technology, scientist and programing skills. A responsible, hardworking, respectful and enthusiastic person. If you need a well done, creative and innovative project then im the one you are looking for.

Venezuela, Zulia, Maracaibo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
chemical engineer

I chemical engineer i have many skills in chemical engineering i capable design us programe simulation example HYSYS, CHEMECAD, us program mathematic chemical process project manangement ,i am working now in market and advertist in the internet and sereach of job in my deperment

Yemen, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Design Engineer

I am qualified in Bachelor's degree in Petroleum Engineering from Universiti Teknologi Malaysia on 2007. I have over 5 years progressive experience working as a Senior Design Engineer at Proeight Offshore Engineering Sdn. Bhd. I am very keen to continue my career as a freelancer.

Malaysia, Selangor, Batu Caves | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering Drawing & Design Expert

A group of Engineering experts merged to deliver specific needs by client. A combination of 22 years of experiences in engineering, we are the right choice for your job. As outstanding performances showed and recommended by others in previous work. Our expertise are in the following engineering branch: (Chemical, Civil, Electrical, Mechanical and Petroleum) We compose all the skills needed to deliver the job in time with satisfaction guaranteed.

Malaysia, Wilayah Persekutuan Kuala Lumpur, Kuala Lumpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil structural Engineer and consultants

We are the consultants of civil engineering and solve the problems accordingly We provide the design of steel structural and R.C.C. structural and detail drawings of those structures on Auto CAD latest versions.We provide the services of designing and detail designing of Industrial, residential, commercial and special in oil and gas industries. Attached sample files are recently structure of petroleum company named BYCO petroleum in Pakistan for erection shop fabrication details drawings . With highly skilled staff members available, representing a range of expertise, we can provide exceptional service no matter the complexity or size of your project. We provide the design and details of steel structural and reinforced structural of residential, industrial buildings, workshop details of steel structural and re-bars on Auto Cad and Tekla structure's latest version. Our engineers and Drafts person are experience having experience of more than 15 years in hand.

Pakistan, sindh, karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical Engineer, Chemist, Formulator, Pharmacist

I am one(1) of 2800 "A" Grade registered pharmacist in Bangladesh, after having a very high standard exam. Before that, I have completed Master of Pharmacy (a 1 year degree) and Bachelor of Pharmacy (a 4 years degree). Already I have worked in different pharmaceuticals industries. I have done full establishment of two different pharmaceuticals industries, those are running in full throttle. All types of pharmaceuticals & cosmetological solution available from me.

Bangladesh, Dhaka, Mirpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Petroleum Geology, Sedimentology, Computer Skills,

I am a professional with Ph.D. degree in Geology with special interest in Petroleum exploration. I am available for internet research of all types, report writing, creation of presentations and database management.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Eager and motivated professional looking to grow and learn both as an Engineer and as a professional within the oil and gas industry. Seeking a challenging entry-level role within the petroleum sector that will allow for eventual advancement into a management-level role, as well as offer professional development opportunities.

Denmark, Capital Region, Copenhagen | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil Engineer, Designer, Primavera, AutoCAD 3D&2D

Seeking for job on line. I have the following: Civil Engineer,Management, Primavera Planner, Construction, Design, Supervising, Contracts / Procurement, Cost, Planning, Draftsman, Quantities Surveying and Quality Control. Good experience in Primavera Planner, MS-Project Planner, Google Sketch, 3D Models, 3D AutoCAD, websites manager, ads and website design.

Yemen, Khormaksar, Aden | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer | AutoDesk Inventor | AutoCAD

Im a Mechanical Engineer by profession In my work I have been invlolved in pressure vessel design, calculation, creating detailed drawing (2D and 3D model view of the equipment) and verification of fabrication drawing. Added to this is to ensure that the client’s specification has been incorporated in the design. I am proficient on operating the following software. 1. Autodesk AutoCAD 2. Autodesk Inventor Professional 3. Microsoft Office Application 4. Adobe Photoshop 5. Adobe Audition 6. Adobe Premiere 7. Adobe Acrobat Also, I am knowledgeable on the following International Standards. 1. ASME VIII 2. American Petroleum Institute 3. Shell DEPS 4. American Welding Society 5. TEMA 9th Edition Im very glad to get the work done for your engineering design needs.

Philippines, Rizal, Alabang | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Modelling and simulation

Currently, I'm an international doctoral student in Japan. My main focus of research and activity is modelling and simulation of chemical engineer processes such as: chemical reactors, membrane reactors, separation processes, control and simulation of chemical processes and more.

Japan, Tochigi, Utsunomiya-shi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
FEED, Engineering Detail, modeling

To be a part of organization that gives me the opportunity to learn, grow and at the same time present me with an opportunity to contribute towards its growth. My knowledge is renewable energy as specifically Bioenergy, Geothermal and Fuell Cell (PEM-FC).

Indonesia, Banten, South Tangerang | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have recently graduated with a Bachelor's in Petroleum engineering from Amet University, Chennai-India and hope to put this to use in the field of Oil and Gas sector. I am looking to develop specialist skills in certain area and build a successful career. I feel it would be the ideal place for me to begin my career and I believe I can be an excellent addition to your team. If you would like to get in touch to discuss my application and to arrange an interview, you can contact me via Mobile +91 900 3 44399 or rajanbe@ymail.com

India, Tamil Nadu, Devakottai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
MECHANICAL ENGINEER / SITE ENGINEER / PIPING

? Following and managing of the project and work site in construction of the pipelines and making effective use of work site crew. ? Working with all self-denial, confidence and initiative manner to finish the given work in predicted time by using company sources at the limits. ? Being able to work for large-scale industrial projects and infrastructure pipelines with easy adaptability to situation.

Turkey, Ankara, Etimesgut | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PMP certified Civil Engineer working in energy

PMP certified with MBA (finance) and Civil Engineering having more than 4 years experience in energy firms in Client & Contractor organization. Presently I am working in Gujarat Energy Transmission Corporation Limited (GETCO), a leading state government power transmission company, as Management Executive where my responsibility includes providing financial and technical updates of project, budget preparation and internal auditing. Before that I had worked in KazstroyService, an Oil & Gas cross-country pipeline EPC firm. My professional achievement includes standardizing various PM practices in GETCO, monitoring civil work involved in major EHV augmentation work and winning tender of project “ONGC Konaban Pipeline” for my previous company. Key competencies include Project Management, Strategic Planning & Execution, Contracts/Bidding & Budgeting. An avid reader of Economist, I have interest in project management practices, conventional/non-conventional energy analysis, & Risk management.

India, gujarat, Vadodara | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical engineer / CAD desiner

I worked for several years on construction drawings for machine components and on electromechanical installation studies. For the last 10 years I am an instructor on CAD seminars.(AutoCAD 2D-3D,SolidWorks, ArchiCAD) Indicative list of companies that attended these seminars: SATO SA, VARVARETSOS SA, EGNATIA ODOS SA,TITAN SA, INTERGEO SA, SOCOTAB SA, HELLENIC PETROLEUM SA, ALMACO SA, EXEL MAK METAL SA. I meet deadlines, I am a team player, I can work following instructions and I can work under pressure.

Greece, null, THESSALONIKI | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process Engineer

I have a Master's Degree in Chemical Engineering from the University of Rome “La Sapienza” and a PhD in Engineering Sciences from the Technical University of Graz. I have an excellent understanding of thermodynamics and transport phenomena, as well as typical chemical processes. My PhD thesis was focused on renewable energies and in particular on the development of a new technology for biogas utilisation; the technology I studied has been patented in 2008 by the Austrian Patent Office. I have a solid experience as Process Engineer in EPC (Engineering, Procurement, Construction) projects in fields such as Petroleum&Gas, Power Plants and Chemical Plants; this job has provided me with an excellent understanding of the complexities and different phases of a project and has allowed me to develop the ability to handle unforeseen problems and issues effectively and efficiently.

Germany, Bavaria, Munich | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I graduate petroleum engineering at 2013, I have training in Jannah Hunt Oil Company As petroleum engineer also as reservoir petroleum engineer, I have diploma in Secretariat, I have more skill of computer, and : I am a fast learner. : I am self-motivated. : Work with minimum supervision. : Work well with a team. : Able to work individually and with supervision.

Yemen, Sana'a, Sana'a | Engineering & Manufacturing | Rating 0.0 (0 reviews)
petroleum engineer

Dear Sirs, I am a petroleum engineering graduate from the Hadramout University, Mukalla, Yemen. Petroleum engineering is the specialty I like most. My love for this field of specialty has led to my ranking Fifth of my 73-student batch. I have had a number of training courses in computer skills and got the International Computer Driving License-Syllabus 5.0(ICDL) Serial Number: UN13606011. MATLAB (One year experience). ? Operating System -Windows/ Microsoft Office (Word, Excel, PowerPoint,using database ,Web browsing and communication) (Five years experience). ? Excellent in using(surfer10 ?log plot (2003)?TechDig,Digitizer Software)well logging programs. ? High typing speed in both Arabic and English.

Yemen, Hadramawt, Saywun | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD Expert Engineers

We offer a wide range of services related to dynamic & cost effective project design, Piping design and analysis, 3D CAD design, CAD detailing & drafting. Further, we are also engaged in offering a wide range of 2D drafting, 3D modelling, product development, Reverse engineering & Conceptual Designing.

India, Gujarat, Bharuch | Engineering & Manufacturing | Rating 0.0 (0 reviews)
engineer

I have completed my education in well established and equipped university thus acquiring all the necessary skill required in this field .To me engineering is all about passion and the more you take engineering work the more skill you gain ,this exactly what i have learn though my experience for the past 6 years.I believe in being all round engineer thus taking programming as part of my industrial work.

Kenya, CENTRAL, NYERI | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical Engineer

Chemical Process Engineer having +02 year of experience. Strong skills in practical troubleshooting and easy to implement optimization schemes for existing Oil & Gas units. Detecting the bottlenecks and troubleshoot systems accurately and repair breakdowns quickly to maintain operating efficiency. Specialties: DCS and ESD based systems PFD's and P&ID's Process Optimization Plant Start-up & Shut-down activities Gas Sweetening and Gas Dehydration MDEA and TEG based gas units

Pakistan, Punjab , Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Veteran Project Engineer Manager

Want to find someone who knows both Engineering and Construction? Can approach it from first-person perspective? Knows the tricks from either side? Need a fair advocate who can give you the straight answers-whether you like to hear them or not? Looking for someone who isn't afraid to work and was a former USAF Civil Engineering Officer?

United States, VA, Oakton | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Chemical Engineer with good experience

Do you have a Chemical Engineering job and are looking for a talented and experienced Chemical Engineering Engineer? I believe that my experience and skill in this background will prove to be of great help to you. I have worked as a Chemical Engineering Engineer for many years and my skills and experience will prove useful to your work. I am ready to start working on your job today.

India, Maharashtra, Nagpur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Structural Engineer & Detailer

Serving as structural engineer & detailer for over nine years which provides on schedule quality civil-structural engineering services to EPC firms in times of critical needs. Worked in the field of structural engineering related to High Rise building, power, furnace, chemical and petroleum industries by investigating the technical requirements in the existing standards and practices of major industries or standard organizations. Experience incorporate three dimensional modeling, static and dynamic analysis, design & detailing of Concrete, Steel, Fiberglass and Composite Structures with special emphasis on process industry facilities involving oil, gas and petrochemical services. Proficient in finite element modeling, design and stress analysis of shallow and deep foundations which include both soil supported and pile supported foundations of heavy structures, pressure vessels, tanks, heat exchangers and open frame industrial occupancies. Contact Info: E-mail: --

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Highly capable engineer with advanced competencies

Highly proficient with advance qualification in all aspects of oil & gas, chemical, mechanical and design engineering.

Nigeria, Benue, Otukpo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Environmental Engineer, Compliance Expert, Auditor

A top practitioner within the Health, Safety, Security, and Environmental (HSSE) Management consulting and manufacturing sectors, with 30 years of progressively management-oriented national and international experience, featuring 18 years in HSSE consulting (concurrently with 10 years in teaching/education), 8 years in the development and implementation of Environmental, Health and Safety (EHS) programs within the manufacturing sector, and 4 years in process design and engineering within the oil & gas industry. An accomplished business leader, highly regarded by clients/employers, with proven abilities to develop and grow business in support of financial objectives (consulting sector), direct key initiatives to create significant market penetration and project generation (consulting sector), and attain and maintain ongoing compliance with applicable regulatory requirements (consulting/manufacturing sectors).

United States, CA, San Jose | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineer

I'm engineer almost 9 years at fabricator of Pressure Vessel, Fired Heater, Heat Exchanger, Hot Oil Heater, boiler, dryer, centrifugal fan

Indonesia, Jawa Timur, Pandaan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Cosmetic Chemist & Engineer

Chemical Engineer with experience in research, development and analysis of personal care and cosmetics products. Hands-on experience on retaining a specified standard of quality while keeping production costs minimal. Capable of using applied research and problem-solving methods to obtain the underlying cause of any chemical-related failure.

United States, CA, Encino | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Design Engineer, Technical Writer

-Mechanical Engineer with solid expertise in the conceptualization, creation, development and demonstration of innovative mechanical designs. Experienced in areas of quality, PROE modeling, kinematics and FEA. Proved ability to apply general principles of physics and engineering to provide technical feasible solutions for complex engineering problems. -3D modeling, Surface design, analysis and part manufacturing

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Junior Pipe Stress and Support Engineer

I am a mechanical engineer, with specialty in the design and analysis of piping systems for onshore oil and gas facilities. I have worked in few oil and gas related projects as a Pipe Stress and Support Engineer with little or no supervision. My objective is to attain a position as a mechanical engineer, where i can use my design and problem solving skills efficiently to assist in the design and analysis of mechanical components and systems.

Nigeria, Rivers State, PortHarcourt | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hydraulic and Heat exchange Engineer

Chemical Engineer 40 yrs exp - Coordination or been part over 180 projects for industry and building utilities. All Project stages like conceptual, basic and detailed engineering, purchasing, control cost, construction and planning activities. Both sides as client and work executor. Strong knowledge on process and mechanical design.

Mexico, Distrito Federal, Mexico | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I/E/A Engineering Advisor

30+ years experience ExxonMobil I/E/A Engineering/Management, Upstream and downstream Industry Project Adviser to Petrochemical Oil Industries.

Mexico, Baja California, Ensenada | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I am experts on Civil Engineering Services

I am working in the field of Civil Engineering since 2010 for projects involving civil/structural engineering and design for the refining and petrochemical power and steel industries, including grading drainage, buildings, foundations, and structural steel. Overall three year experience in the field of structural engineering related to power, chemical and petroleum industries. Experience includes static and dynamic analysis and design of heavy structures and foundations, Finite element analysis of structures and components, Three Dimensional modeling.

Bangladesh, Dhaka, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Process Engineer

Process Engineer with more than 7 years experience designing PFD's, P&ID's, Material & Energy Balance, Pipe & Equipment Sizing and simulation process for the Oil & Gas Industry.

Venezuela, Zulia, Maracaibo | Engineering & Manufacturing | Rating 5.0 (1 reviews)
English to French translator - Construction Expert

A native French speaker, I hold a master degree in city planning from MIT and have 5 years professional experience in this field, having worked in an architecture agency in Japan, a regional planning agency in France and a civil engineering company in Taiwan (in an English speaking environment). I have also 16 years of experience as a translator, including 5 years as a professional one. I am mainly specialized in construction projects (building construction, architecture, land development, civil engineering...), with two other working fields: oil & gas and aviation. I have worked for Exxon for many years to translate their oil refinery operational and maintenance procedures from English to French, and I have also translated many aviation-related documents related to flight training and procedures and airport facilities. For construction projects, I partner for the proofreading phase with a construction management engineer with 12 years' work experience, including 10 at Vinci.

Taiwan, Taiwan, Tainan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
2D & 3D CAD Designer / Product Designer

Efficient and hardworking mechanical design engineer using mostly Autodesk Inventor. Pipe stress engineer with over 2 years of practice in that area. 3rd place winner of Dispensing Cap Mechanism Challenge in GrabCad. Designer of SENS Standard Pipe Support Catalog 2015 with over 50 different pipe supports (fully optimized via FEA)

Bosnia and Herzegovina, null, Gradiska | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Estimator, Structural Designer, STAAD, AUTOCAD

I am a licensed Civil Engineer presently working in the technical department particularly in tender in a construction firm here in Qatar. We tender on projects on government projects own by Qatar Petroleum, RasGas, Ministry of Defence, Ministry of Interior, ASHGHAL, and privately owned companies. Some of our tenders includes, cyber center, multi-storey buildings, mosques, military barracks, Camel-embryo laboratory, schools, civil defense buildings, showrooms, villas, etc.

Qatar, Doha, Doha | Engineering & Manufacturing | Rating 0.0 (0 reviews)
MSc. Theoretical & Computational Chemistry

I possess a Doctorates degree in Biotechnology, Masters degree in Theoretical & Computational Chemistry. I have over 15 years work experience with scientific research fields and engineering design.

Honduras, Francisco Morazan, Tegucigalpa | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Estimator and Engineering Specialist

I am a skillful, hardworking individual dedicated to providing the required outcome for my clients. My skills include: project management, estimation, engineering, computer modeling and designing (using autocad and adobe suite). I have 7 years of engineering/construction experience including design, estimating, project management and modeling. In my spare time i take on online work and am continuing to expand my online presence. I guarantee that if I am your selected contractor projects will be completed accurately and on time.

Australia, Qld, Mermaid Beach | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Engineering design for energy, oil and gas sector.

Zhatech Engineering provide online solution on design and engineering for oil, gas and chemical industries. Company has well experiences team offers design and engineering for process equipment, piping design, pressure vessel, storage tanks and heat exchangers which are according to international standard codes such as ASME code Section VIII Div 1 and 2, PED and British standard.

Malaysia, Johor, Johor Bahru | Engineering & Manufacturing | Rating 0.0 (0 reviews)
HVAC Designer

HVAC engineer: Designing of heating, air conditioning, ventilation, gas installations, for buildings with different purposes: schools, kindergartens, sports facilities, warehouses, commercial and residential buildings, administrative and commercial buildings,clean rooms. The most famous clijents:"TRADEUNIQUE HOLDING" Belgrade, "Termoproject" Belgrade,"GXPExpert" Vrsac Serbia, etc. Enginer for Proces equipment: Designing of equipment in process industry: pressure equipment (vessels, heat exchangers, tanks, etc.), pipeline,etc.Preparation of workshop drawings for production. The most famous clijents:Plant Oil Refinery Pancevo Serbia, Plant Fertilizers and Plant Petrochemistry Pancevo, Plant Oil Refinery Kirishi Russia, etc.

Serbia, Serbia/Vojvodina, Pancevo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Piping Stress Engineer

Experience in stress analysis for piping system in LNG plant and refineries.

Philippines, Metro Manila, Pasig City | Engineering & Manufacturing | Rating 0.0 (0 reviews)
GT Commissioning Engineer

My primary responsibilities include on site jobs related to commissioning and assessment of Gas Turbine and the auxiliary equipment of Power Plants at client sites across NWA (North & west Africa area).

Algeria, Algeria, Biskra | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Welding engineer by profession and is currently undertaking the IIW IWE Diploma certification. Mainly exposed towards the construction and installation of subsea equipments and pipelines. Due to experience in subsea equipment design and pipeline, main responsibilities include the engineering support for any fabrication/metallurgical issues during the design stage, and to support the project during the construction stage.

Malaysia, Selangor, Ampang | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I’m fresh graduated mechan?cal engineer seeking for a challenging opportunity with a company that applies and further develops my interpersonal skills while building my academic background.

Egypt, Al Buhayrah, Damanhur | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm currently Global Proposals Manager for the SURF group at Prysmian. In my career, I have achieved various challenges at different positions; my most exciting ones being so far: - I coordinated a FEED involving 7 Technip entities across the world and leading to a paper presenting a new technology: "Electrically Trace Heated Umbilical" (DOT conference, 2014) - I successfully managed an important project (Panyu / CNOOC) including more than 50km of umbilicals, innovative design of terminations and interfaces with new suppliers. In this project I also developed full umbilical qualification plan including procedures. - In response to the increasing work load in the engineering flexible pipe division, I developed tools for automating calculations that are still helping saving weeks of analysis on many projects In parallel of my work, I am always looking for new things to learn and try to push the challenges further. In the past months: - I have created GridCompute (hosted at gridcompute.

United States, TX, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
engineer metallurgical

Please Metallurgique Engineer University of Science and Technology Oran ALGERIA USTO and with 09 years experience in Oil & Gas Company ‘Anadarko International Petroleum, Saipem Eni, Sonatrach .... Batmétal, I am looking actively for a job position: QC Inspector Mechanical Works & Steel Structure and Quality Inspector Refinery ‘ With a profile Senior Mechanical Quality Inspector, I am attracted to activities that flow management can afford to do and I would like to use my motivation and drive to a team challenging and stimulating. For the position involving versatility and adaptability, my experience will be a major asset. Rigorous, independent and has a good relationship, I have a profile in line with the world of Quality and QHSE. My ability to work and my perseverance also allowed me to grow and improve myself.

Algeria, makame echahid, Sidi Bel Abbes | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineering option Metallic Structures

metallic construction in the oil and gas field

Algeria, Boumerdes, Si Mustapha | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electro-electronic Engineer

19 years work experienced Electrical Engineer (B.E.Electrical) with wide range knowledge about industrial electronics in component level. Also has been completed the oil field related safety courses including PTW, IFR, H2S, IND and IND.

Sri Lanka, Sabaragamu Province, Kalawana | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Civil/Structural/Geotech Consultancy (Oil&Energy)

Over 15 years experience

Philippines, NCR, Manila | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Seasoned professional in business and engineering

-25 year track record in business and technology specializing in New Product Introduction, Business Process Engineering, Program/Project Management, Quality, Manufacturing. Strong in energy - energy storage, wind/solar, inverters, lithium battery technology, electric power distribution. -Highly experienced in business and development processes and methodologies. -Years of experience in audio engineering, production and studio management -Excellent Pro guitar player and singer.

United States, CA, Sausalito | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

•Experienced Lab manager/supervisor that is active in sales support •Recently used ICP, titrations, GC, UV-Vis, and HPLC. Familiar with many analytical methods and instruments •Well versed in writing, editing, and following standard operating procedures (SOP) safely in the lab. Analytical improvements and developments were part of the processes. •Knowledgeable about brewing, alkanolamines, glycols, polymers, and water treatment; especially with electrocoagulation •Most of the previous positions required research and development of processes and products. The lab work was well organized and detailed into lab books and reports. •Well versed with Microsoft Office applications: Word, Excel, Power Point, and Outlook

United States, IL, Cambria | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Baffling scientific mind

Grooming myself in the engineering skills which can enhance my analytical abilities, critical thinking and thereby providing me plenty of opportunities to grow along with it and become proficient in many applications. I will offer to my clients all the given work on time. I will remain efficient all the time and work hard for giving you best result.

Pakistan, sindh, karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD, Matlab, ProE, Electronic Circuits Expert!

Need Solutions and Services for your Engineering Problems, Technical Reports, Academic Reports, Assignments, Papers, Essays,Thesis, Dissertations? This is the right place for you where we guarantee quality work meeting your all requirements within time constraint. We are a multi-dimensional company having expertise in almost all the fields of Engineering. We have experts for all your technical needs that can provide valuable services with a mission to advance towards that bright light that will enlighten customers satisfaction level to the sky. We have extensive experience in designing electronic circuits, simulations, testing and prototyping.We are very creative and try our best to give quality work within the time constraint. Why work with us? - A professional attitude – respecting your deadlines - Communication that is both prompt and courteous - Experience with flawless results - Work that meets your high standards

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Reserves. Economics. Development Planning.

Exigo Energy Solutions is a subsurface consultancy focused on serving US based oil and gas exploration and production companies. Feel free to contact me for any short or long term subsurface consultancy needs that you may have. About the Founder, Rohan Irvin: Over the past 10 years he has worked in the Upstream E&P industry for Woodside Energy in Australia; Occidental Petroleum (Oxy) in the US; Oilex in Australia and India; in a Reservoir Engineering advisory capacity with Occidental Petroleum of Qatar and as a Reservoir Engineer for Sheridan Production Company in Houston focusing on Permian Basin assets.

United States, TX, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
PLC, SCADA, LabVIEW,HVAC,MARKETING,EXPORT/IMPORT

INSTRUMENTATION AND CONTROL ENGINEER with 8 years of industrial experience. Founder director at Gyro Automation Services. Worked with Johnson Controls, Honeywell as a BMS and HVAC engineer. Working as Senior support engineer with Chipkin Automation Systems, Vancouver Canada. Handling customers from USA, CANADA, UK etc. solving their queries regarding communication protocols and gateways. Expert in online marketing and strategy planning. Having team of expert and professionals having versatile knowledge and field experience. Registered Importer and Exporter in India.

India, Maharashtra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I have a degree (B.E.) in mechanical engineering. Working as a Senior Design Engineer-Process Safety/ fire Protection, in Process Plant Division in Hyundai Engineering Co. Ltd. Seoul S. Korea. having total experience of more than 7 years of Process Safety/ fire Protection in oil & Gas Sector. Worked in a) Hydrocarbon Plants, b) Petrochemical Plants & Refineries. c) Petroleum Depots & Terminals. d) Oil & Gas Processing/Production Plants. e) Chemical Plant Areas Of Expertise: Design of Fire Protection System in : a) Hydrocarbon Plants , b) Petrochemical Plants & Refineries. c) Petroleum Depots & Terminals. d) Oil & Gas Processing/Production Plants. ï?¶ Design of Fire Protection System in Power Plants ï?¶ Detailed Engineering. ï?¶ Design of Hydrant System. ï?¶ Design of HVWS System. ï?¶ Design of MVWS System. ï?¶ Design of Deluge System. ï?¶ Design of Automatic Sprinkler System. ï?¶ Design of Foam extinguishing system. ï?¶ Design of Gas Ba

Korea, Republic of, Seoul, Seoul | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I finished my Master in Geophysics, I can work hard in all topics related to Geology-Geophysics-Mining topics or any other Geoscientist jobs

Egypt, Al Qahirah, Cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Network Engineer/ Msc of Electrical Engineering/

An engineer with a litany of high end professional certifications (CCNA, SCOM, MCITP) to credit and a short yet impressive track record in supporting FTTH networks, quality control as well as networking and telecommunications system integration, seeking a challenging techno managerial profile to contribute proactively in achievement of tangible organizational benefits. - Network: Design, Installing, Administering, Upgradation, Troubleshooting & Performance Tuning . - Technology Management, Operations/Process Mgmt, Total Quality Mgmt., RF Planning and Optimization . - Windows Server Active Directory and Infrastructure, Managing and Configuring Cisco Switches/ Routers . -Communication, Leadership, Analytical, Interpersonal, Team Building, Creative Problem Solving Skills - Project Management, Telecommunication & Electrical Engineering, FTTH .

Saudi Arabia, Al-Sharqiya, Al-Sharqiya | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a petroleum engineering, with certificate in health, safety and environment(SHE) and also a certificate in oil and gas facilties development. I can work as a petroleum, process, facilities or technical safety engineer. I have a combined working experience of 3 years and can work with software like, Hysys,Auto Cad, Pipesim, Microsoft package, etc.

Nigeria, Lagos, Lagos | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AC technician, HVAC foreman

Capable to attend any fault in window AC, Capable to attend any fault in split AC, Capable to attend any fault in packages, Erection of freezer, chiller, repairing and troubleshooting, Erection of the ammonia plant also, Can do all types of electric work in AC division and also install split AC, package AC and freezer, Chiller, Capable of doing any type of brazing-copper, silver, Brass and stainless steel also, Installed all types of AC including ship and rig also, I already worked in Dubai drydocks and Sharajah Kaliath port, Installed all types of HVAC in the oil and gas field, Capable to attend all types of fault HVAC in the oil and gas field, I worked as a HVAC foreman in the HVAC maintenance in Qatar petroleum masaieed QP, oil and gas field in the Qatar, I already worked in the HVAC inspector in the RAS GIRTAS power company RAS LAFFAN industrial city in the Qatar, I worked as HVAC worksite supervisor in Qatar petroleum Dukhan oil and gas field.

India, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer

Sudanese graduate with Bachelor Degree in Mechanical Engineering from University of Sunderland – Malaysia2012 and a Diploma in Petroleum Engineering (3 years Programme) from Sudan University of Science and Technology. Great communication skills with customer service experience, well skilled in AutoCAD 3D Concept Design, Simulation Softwares and Microsoft Office Package.

United Arab Emirates, Ajman, Ajman | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

i'm serious rigor in my work allows me to have the chance to be recruited

Algeria, bouira, bouira | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Ph.D. with Practical Oil & Gas Experience

Dynamic, energetic, and results-oriented professional with international experience poised to take oilfield technical knowledge into a new milieu. Triple Ivy-League educated and has diverse knowledge across the engineering spectrum, with a strong fundamental knowledge of petroleum engineering, chemical engineering, chemistry, mechanical engineering, biochemistry, bioengineering, and materials science. Strong language skills, speaks four languages, and can communicate effectively in a technical, business, or operational setting, or all three simultaneously, and a natural translator between groups. Outstanding data-analytic skills – can digest complex data systems, find trends, and link together diverse subjects, bringing out-of-the-box thinking to any subject. Experience in management of both people and projects in a range of difficult environments. Best at navigating all aspects of complex projects and working under pressure with short deadlines.

United States, TX, El Campo | Engineering & Manufacturing | Rating 5.0 (1 reviews)
'English Literature'.'Scientific','Marketing'

I recently graduated with a bachelor's degree in Petroleum engineering furthermore I am also organizing English tutorial for all levels, freelance translating and proofreading services.

Thailand, null, Yala | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Upstream Oil and Gas Graduate

About to graduate with Msc in Petroleum Engineering, obtained a Bachelor Degree in Petroleum Geosciences in 2013, and experienced 7 months as Well Integrity trainee with PETRONAS in the Well Intervention Department under Sarawak Operation. Project FYP : Shale Gas Potential of Setap Shale Sarawak Project FDP: Prospect Maturation of X field in Malay Basin

Malaysia, Sarawak, Kuching | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I am a former marine engineer who worked in the oil and gas industry supporting and managing a fleet of 80+ assets. My roles in the company included field support, stability and structural analysis, shipyard project management, asset integrity, development of corporate management processes and procedures, company wide document consolidation to an online portal, incident investigation, operations audits, automation and power management, and developing reports on performance and budgets in excel and powerpoint.

United States, CA, Laguna Niguel | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

8 Years’ experience as a Quality Control and Assurance Engineer, Welding and Mechanical inspection for fabrication, erection, modification, alteration & repairs of pipe lines, pipe nets, storage tanks & all static equipment with good knowledge of API, ASME and AWS codes.

Kuwait, Al Kuwayt, Kuwait | Engineering & Manufacturing | Rating 0.0 (0 reviews)
please contact my email for any inormation

please contact my email for any inormation

Russia, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Petroleum Enginering Graduate Student at Colorado School of Mines. 10 years in oil and gas, with drilling experience in all major US shale plays.

United States, CO, Denver | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

Petroleum engineer has a good experience in research and using advanced tools. Provide perfect work in minimum time.

Egypt, Al Qahirah, Cairo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Product Design and Rapid Prototyping (Solidworks)

Mechanical engineer wit broad experience in mechanical and product design and mfg. Rapid prototyping services. Drafting and Design Services

United States, TX, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Piping-Layout,Specification,Stress,3D Modeling

*17+ years of rich experience in the field of Piping Engineering *Worked on Chemical, Petrochemical, Fertilizer, Oil & Gas, Bio Fuels Projects from concept to commissioning *Worked on challenging tasks & work environments in green as well as brown field projects *Expert in Layout & substantial experience in Piping Specification & Stress Analysis *Worked with various nationalities and has best communication skills

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3d architect engineering design interior exterior

3d architect engineering design interior

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
null

I'm proud to be an engineer and i'm always looking for the challenges that increase my experience to achieve my goal.

Egypt, el basateen, cairo/egypt | Engineering & Manufacturing | Rating 0.0 (0 reviews)