For the past 18 years I have been earning a living as an AutoCAD detailer. I have worked with large national institutions such as the Smithsonian as well as small museums such as the National Children's Museum. One of my strongest skills has always been working through construction details with clients and designers. I have always offer value engineering solutions that allow for the vision for the design to be fabricated as efficiently as possible, specifying material is key. As a fabrication production coordinator, my hands-on experience in a fast pace, deadline driven environment combined with my practical problem solving and coordination skills make me an ideal candidate for any detailing project that is preparing for production. And having run project from inception to completion, developing and managing contracts, scope, budgets and schedules, IÂve learned firsthand how critical it is to have projects run on time and on budget. Also, cocktail napkin sketches a specialty.
I am extremely proficient in AutoCad and Solidworks. I have been doing custom home design, and architectural metal in the Las Vegas area, and have another drafter if needed.
Institution University of Sarajevo Â Mechanical Engineering Faculty Date : September 2008 - June 2012 Degree(s) or diploma(s): Bachelor of Science in Mechanical Engineering 7. Languages: Language Passive Spoken Written English 5 5 5 German 4 4 4 8. Membership of professional bodies: 9. Other skills Social skills and competences: Excellent skills for organization and decision making, work in a group or independent. Ability to adapt in multicultural environments and to share knowledge and experience with colleagues. Enthusiasm for new experiences supported by a strong inclination towards research and willingness to upgrade the level of work for a new projects. Computer skills and competences: - - Microsoft Office software: Word, Excel, PowerPoint, Front Page; - CAD 2D/3D applications: AutoCAD, 3D Studio; - Carrier Hourly Analysis program
I am a licensed structural engineer (licensed in Texas, Oklahoma and Louisiana). I have 14+ years of structural design experience in steel, concrete and wood. Currently, I am self employed and do mostly residential design work. From architectural AutoCAD drawings, I create permit- and construction-ready roof, ceiling joist, floor joist, wall bracing and foundation plans, with supporting calculations and documentation. I also do design work for miscellaneous steel fabricators (stairs, handrails, etc.). I review drawings and size all members and provide supporting calculations.
I have an advanced background in Auto Cad and Revit in both 3D and 2D drawings and renderings. I also have an advanced background in importing data from a Revit model into Microsoft Excel and Access which I then can use to create spreadsheets, custom forms & report, as well as word documents. I am very skilled with creating custom reports in Access so that any information you have in your model and be articulated into detailed reports designed around what you are looking for. I am also have over 10 years with working with Cad and 5 years experience in working with Revit.
I am a Mechanical Engineer from NIT Allahabad, India. I have worked with Bharat Electronics Limited in design and development of RADARS (Mechanical part). Good at AutoCAD and willing to convert your crude sketches into 2D Autocad files with proper detailing and dimensioning as per your requirements. 100% satisfaction guaranteed. Time!Cost!Quality!That Is All I Strive For. Give me chance, trust me you will not be disappointed.
Highly skilled individual with over 4 years experience in engineering design and manufacturing. Excellent in operation of CAD softwares especially Solid Works. Knowledgeable in operation of machines(CNC Milling, Lathe). Has background in design of Plastic Molds and Progressive and Simple dies. Hardworking individual with great communication skills and a solid technical foundation.
Hello,I have four years experience in plastic design and sheet metal design in automotive engineering.i'm expertise in catia V5 R20 and Nx 7.5.
A qualified architect with a 6-year job seniority in the field. Skilled in: AutoCad,Bentley Microstation,SketchUp,Lumion 3D,Luxology render,Photoshop and others... Aquainted with visualization, animation and simulation of objects.My profile interests are focused primarily on the real estate design,its external and internal composing. Functional ideas of my works are in constant coordination with modern aesthetic trends. All my designs have been completed in due time with an individual approach to each commission.Each fresh commission is considered by me as another opportunity and occasion to study and improve. My profesessional credo can be expressed by the following principles: a) There is nothing unrealistic in current architecture; b) A customer is always right. Be my customer and I am ready to help you at any moment.
As an arhitect with experience in building, designing of residential buildings and interior design, I believe that I can successfully complete the tasks in the field of architectural design. After completing studies at the Faculty of Technical Sciences in Novi Sad, Department of Architecture, I worked on the design and construction of prefabricated residential buildings. Experience on building site, helped me more to improve my skills in this area. To create tehnical drawings and documentation, I usually use Auto Cad combined with Sketchup and and I have experience with software Revit, Archi Cad and 3dsMax.
We have more than 10 years technical expertise in AutoCad, Archicad and other architectural programs. Although we are just starting to work as freelancers we can ensure a high professionalism and dedication to our work as we have strong architectural backround. You will not regret hiring us.
I m an mechanical enginer which also have knowledge of autocad, microsoft office & other computer skills.....i will complete your work before time & without mistakes & i will charge less cost of mine work than other freelancer
Chartered Mechanical engineer professional with 8 Years experience. Developed 15 plus prototype designs from concept to production status. reduced prototype development costs but 36% for current employer. Successfully managed projects from $2k to $240k. Highly skilled at 3D CAD modelling and related detailing. Looking for side line work to supplement my income. Excellent time management skills and notable time to completion on projects.
Student at Clemson University majoring in Mechanical Engineering. I have taken basic classes in both AutoCAD and Solidworks and am currently a 3rd-rotation co-op with a major appliance manufacturer.
I would like to have a freelance job using my qualifications either as an mechanical engineer. I have experience in Sketches to CAD translation, 2D/3D CAD drafting, 3D solid modeling in SolidWorks for any purpose, FEM Analyses.
- Proficient in Solidedge, CATIA, FEMAP, powershape. - 3D modeling, product development from design to manufacturing support. - 2 years experience as Industrial designer. - Providing CAD/CAM solution to industry for past 1 year.
I'm professional in issuing drawings in 2D & 3D model for various conceptional systems. I have a rich experience in Solidworks, machine part design, 3D printing, sheet metal design, scale models conception and different art models design. My skills include proficiency in : - Selection and calculation of Hydraulic Bought Outs - Preparing hydraulic piping routing for various hydraulic systems required in various machine drive - 3D Modeling of Parts and Assemblies using Autodesk Inventor, Auto CAD and SolidWorks.
I am always looking to improve my skills and knowledge. I have a passion for science and design. I always seek to understand things to the finest detail and to express my thoughts and ideas with the same amount of detail. I am proficient with Auto CAD and specialize with the Architect package. I am familiar with many building code and not shy to look them up when faced with uncertainty. I have an interest in manufacturing and able to draw models for CNC and 3D printing. I am excited to use my creative and systematic mind to help give you the models or drawings you require in a timely fashion as well as show you my style/standard of work.
I am civil Engineer currently works in Saudi Arabia as QS Engineer. I have 8 Years of experience in this Field. I am very Good in Word Excel & Auto Cad and I have Good Computer skills also.
I am at the last year of my Architecture studies at the Aristoteles University of Thessaloniki with a 2-year experience as a Junior Architectural Designer at a studio of Thessaloniki. During my studies and my professional experience I have worked on various projects, such as Modern Residencies, Student Camps etc., and produced a lot of CAD drawings and 3D models.
I am Architecture Draftsman and interior designer. I have completed a professional course from SIX SIGMA ACADEMY. I am working in Tamaya Synergy Sdn. Bhd. 742183-D for 2 years. I do draft for project layout elevation and section details in 2D, 3D rendering Studio Max. I am familiar with Auto CAD. 3D Studio Max, Adobe Photoshop, adobe Illustrator. I have been using this software for three years professionally in different company projects. I am also expert at Microsoft Excel. I am a perfectionist and always try to achieve the best out come from every project.
I am having knowledge in Adobe Photoshop, Coreldraw, AutoCAD 2D and 3D, Sktechup Pro 3D. Beside that I also able to operate windows operating system and supporting software like Microsoft Office. I am a person who can work either independently or as a part of a team, I have strong interpersonal and analytical skill, and I am fast learning and a positive attitude too.
Electrical Engineer with 8+ years of experience in putting together electrical design package ready for permit. Permit package includes stamped Lighting, Power, Single Line Plans & Calculations. Electrical design done per 2013 NEC, 2013 Title 24. Design done using AutoCAD 2000. PE (Electrical) registered in CA.
My name is Jelena Obradovic and I am professional architect. I have several years of experience in online collaboration with USA based architectural company. My job role was to draw AutoCAD technical drawings based on hand-drawn sketches of plans, elevations, sections, details, plumbing and electrical plans. Projects I was working on were single family villas, condominium buildings, office and retail buildings, hotels and recreational complexes. I was included on projects from the beginning of the design to the detailed construction drawings.
I am self motivated, organised individual, reliable and ambitious. I work well individually or within a team environment and am able to use my initiative. I have excellent inter-personal and communications skills and a professional telephone manner. I have lot of work and life experience so I learn fast and I adapt easy to new methodologies and working conditions. I like to get the challenges that I propose and to keep improving myself every day. My challenge is to find a job where I can gain more experience in the construction field in order to keep improving my professional career and building management skills so I can do my job in the most professional way and establish a good career path in architecture and design.
Geospatial engineer, an old school Land surveyor with a long experience in field measurement with Total stations (Leica, Topcon etc), Gps (Ashtech, Leica, Topcon ) and Knowledge of Arc-info, Arc Scene, Databases, Autocad Civil 3d, programming etc
graduate civil engineer with wider background knowledge in applied mathematics,engineering skills,autocad ,computer skills and a good English language command.
With +10 years work experience in architecture. Professional in Auto Cad, Revit Architecture. Concept, design solutions and interior design. I design every kind of building type.
i am MANO from SRI LANKA, Auto - CAD Professional. and Construction Specialist.
I have a Master's degree in technology management and a BacheIor's in CAD. I have also been a drafting teacher at a community college for 5 years. I teach various drafting classes from mechanical to residential to civil. In those classes I use Solidworks, AutoCAD, Revit, AutoCAD Architecture, and Civil 3D. I
i am a autocad draftsman. i have 12 years experience in architectural/structural/MEP drafting.working in dubai with an architectural firm.
I'm a design engineer at a manufacturing company, and have extensive experience of managing projects using CAD, FEA, creating bills of materials, P&ID's- I'm currently working towards incorporated status with the IET and IMechE. I have access to all AutoDesk software.
I am a creative engineer who is well adept at solving challenging problems in a fast-paced environment. I am experienced with product development and custom engineering designs. Highlights of my experience have included engineering design and management of projects for customers such as NASA Langley Research Center and Lawrence Berkeley National Lab. Whether you are looking for quick 3D models for prototyping or complete design and engineering analysis, I have the skills and experience to deliver quality results in timely manner.
I am a civil engineer with 17 year experience in cad drafting. Work mainly via internet.
Doing BS-Engineering (Electronics) expert in electronics circuit designing, experts in programming good in MS-office, Atmel AVR, C++, Java and PCB designing and autoCAD specialist.
I am muruganantham done bachelor in engineering in Aeronautical Engineering and also have Autocad certificate holder and my experiance is morethan three years in the relative field.
I am a Mechanical Engineer with 10+ years of experience in mechanical design and drafting works for manufacturing and other engineering industries. , I am proficient in using advanced CAD designing tools such as Solidworks, CATIA and AutoCAD which I gained through years of experience in different companies.
As architect i'm skilled in design private housing. Also I can help you to make 3d-visulisation of your ideas or convert your drawings to CAD format.
Undergraduate pursuing mechanical engineering. Well occupied with Autocad skills. Able to do mechanical designing. I'm also well versed in Microsoft office applications such as word, excel and power point.
I have higher engineering education and five year experience in AUTOCAD. I like this job and try to do my best.
i am a certified auto CAD professional with id:00412740.i use the concept of psychology in design the product that will appeal the customer.I do work with cad soft wares also
Professional mechanical engineer with a flair for creativity and innovation. Expert with using all latest design software packages e.g AUTOCAD, SolidWorks, ANSYS etc. Dedicated, hard working and committed to work.
We can provide following services with best performance: # Auto Cad Draftin # 2D Design & Drafting # 3D Modeling # Finite Element Analysis # 3D Assembly & animation of various mechanism
I am well equipped with good background of mechanical design using CAD, electrical and electronic design amidst mathematical skills. To accompany these are my innate push to always produce the best possible.
I am first and foremost a problem solver. I like to sink my teeth into complex problems and devise a solution that yields value to my client, using whatever tools are best suited to the problem at hand - from simple hard work to advanced analysis techniques. I'm also good at building effective relationships with project stakeholders. In general, my work history shows a willingness to try new things and apply myself to quickly get up to speed and be productive. In the course of my career I have switched industries from shipbuilding to telecom to subsea and have found success every time. I am innovative and customer focused, consistently improving the image of the company and group I work with by paying close attention to the concerns of our external and internal customers.
I am professional in structural design and survey drafting with AutoCAD. I like to provide my service with in this area detailed above thanks for u your co operation
I am able to draw with sketchup and autocad as well as write simple programme with excel vba and macro.
40+ yr. experience continuous in steel fab industry. Six year exp detailing thru employers and twelve yrs. self employed. Remainder experience as estimator and project management. Detailing experience in rolled beam bridges, plate girder bridges, crane run ways, single and multi story bldgs and industrial complexes. Offer detailing produced in auto cad 2D only, 2004 version. Standard detailing in accordance with AISC detailing manual unless instructed otherwise by customer.
I am an Australian Registered Architect with 19 years experience. Until 2 years ago was the Director of The Group Architectural practice in Brisbane employing 11 staff. I have the following University degrees from Australia. Bachelor Environmental Design (Hons) UTAS Bachelor Architecture (Hons) QUT Grad.Cert. Property Economics (QUT) I was a Founding President of the Australian ArchiCAD User Group, and have held Lecturing positions at two different top tier Universities in Computer Use in Design. I relocated to Bali and am now very keen to get back into Architecture, as work prospects here are bleak and sporadic. I have also worked as a consultant in documentation delivery systems for Woods Bagot, Westfield, John Mainwaring, Frank Raadschelders, and many other large firms and famous Architects. You can view some of my works on my facebook Page fb/AdamBaliArchitect
i offer a good floorplan, exterior and interior 3D design. im a good autocad operator and i can finish a job on what exactly the deadline given. and im willing to work anytime
I am an architecture student at the University of Architecture Civil Engineering and Geodesy in Sofia, Bulgaria in my fourth year of my Master's degree in Architecture, familiar with both AutoCAD 2D and 3D modeling, Google SketchUP, Autodesk Revit and Autodesk 3DS MAX. I have been using these software for several professional projects during the past 2 years. I am also an expert Microsoft Excel operator and data entry specialist. I am a perfectionist and I always try to achieve the best outcome of every project.
Je suis un jeune ingÃ©nieur en gÃ©nie industriel et je maitrise le pack Microsoft office. Je peux programmer avec Matlab et faire des simulations avec Simulink. Je maitrise aussi le logiciel Autocad .
For the past 3 years i have been working on several different companies around the world along-side several well known architects like RD Harris, Graham Jones and Norman Foster. I have worked on several design projects and my core strengths lie in conceptual design and sketches. Detail designing and planning is also among my strong points. I have experience with the following softwares: Autodesk AutoCAD Autodesk 3DS MAX (Modelling software) Autodesk Revit (BIM Software) Sketchup (Modelling software)
I currently work as a mechanical engineer and I specialize in designing projects on SolidWorks and AutoCAD. I can do different 3D models and sketches/drawings on SolidWorks and 2D drawings on AutoCAD. Please check my porfolio to see some of the 3D models I made.
I am musab bin hamid, I am civil engineer & Auto cad, 3d max, designeer. my facebook page www.facebook.com/spiautocad. my blog is www.spiautocad.blogspot.com
i'm a mechanical engineer , have good experiance in CAD/CAM/CAE and 3D printing, i have worked on many projects as a freelancer as well as in industrial projects
My name is Anna. I am an architect-designer and 3D visualizer. I have an experience of 3D modeling and interior design more than 5 years. My skills - 3D max + Vray, AutoCAD, Marvelous Designer, Adobe Photoshop and Lightroom. My main specialization - 3d visualization, 3d modelling and rendering, architecture and design, interior design. I have higher architectural education.
I'm material science engineer, with more then 8 years working experience in SolidWorks and AutoCAD programs. Previously working a lot with vacuum technique, crystal grow equipment, silicon purification. My working interest are additive manufacturing, solar technologies and electric vehicles.
Autocad 2D with over 10 Years experience, paper to CAD 2D, design of plumbing and ventilation. I work quickly.
I am a mechanical engineering technologist graduate. I have experience in Autodesk Inventor and AutoCAD.
Bilingual draftsman (En, Fr) Experience as a draftsman: - Conception of sheetmetal storage solutions & vehicle accessories (Autodesk Inventor & Metalix) -Conception of piping installations, P&ID plans and implementation of projects in existing database. (Autodesk Autocad, Bentley Autoplant) Other skills & experiences: - Welding & assembling (6 years of professional experience) - Carpentry
Provide services on the following: 1) Structural Designs on Dwellings 2) Civil Designs on dwelling & developments 3) Architechtural Drawings 4) Diverting CAD drawings to Revit
I am a Mechanical Engineering student with a background in computer aided drafting and modeling. I have access too MATLab, AutoCAD, PRoE, and Solidworks. I also have a working knowledge of C++, Java, PHP, Python coding. I speak English, Spanish, and a very little French. Ready an willing to work for a low rate to return a quickly and quaility product.
My core competency lies in designing ships of all types. I have been through all stages in the designing process such as designing ship's lines, calculating ship hydrostatic and ship's stability, scantling ship structure as well as desiging ship propeller. I use AutoCAD 2D and 3D as well as Rhinocerous for my work. I have also developed some softwares using Visual Basic programming language such as Loading Managment, Propeller Design. Apart from that, I also have some experience in ship production design using ShipContructor and FEA of ship structure using Maestro.
Hello, my name is David. I have worked in the engineering industry for nearly 20 years. Started as a welder/fabricator and now work as a design engineer. I have developed many key skills, these include: welding, cnc machining, 2D and 3D CAD, ISO 9001/2008, and excellent computer skills.
We are a team of engineers and design professionals from Philippines currently based in Malaysia offering a wide range of CAD services and design solutions at a reasonable cost. Fast results, quality of work and customer satisfaction are our main priorities. Our services core skill set and area of expertise includes: - Virtual prototypes (3D modeling) - Mechanical drafting and design - Industrial and consumer product design - Plastic product design (rotational molding, injection molding and blow molding) - Shop/Fabrication drawings - Progressive tool and die design (products & mold - semiconductor parts & automotive parts) Other related services: - Part model analysis using Finite Element Analysis (FEA) if required by client - Photo realistic renderings of 3D model for presentations and brochures - Part and assembly animations - Product Assembly instruction manuals - 2D detailed drawings with bill of materials - Reverse engineering - Logo designs
Total 18 Years Gulf Experience in Mechanical Designing and Drafting Field. Preparation of Mechanical Air Delivery, Chilled Water systems, Schematic Diagrams, Equipment Schedule & Design Drawings as per the local authorities requirements using AutoCAD & Revit MEP.
* Expert in Meshing and Model set up for CAE/FEA/Stress Analysis Tools: Hypermesh, ANSA * Expert in CAE/FEA/Stress Analysis and post-processing Tools: ABAQUS, MSC NASTRAN, ANSYS, Hyperview * Expert in Durability CAE simulation - Predicting fatigue life Tool: n-code design life * Expert in Product Design activities - Carrying out design of productÂs mechanical components/sub-assemblies/assemblies, preparing 3D CAD models, 2D detailed part drawings using GD&T guidelines, creating BOM, ordering prototype parts, releasing drawings to suppliers for RFQ, preparing technical data sheet Tools: Solidworks, Pro/ENGINEER, CATIA, NX (Unigraphics), Autodesk Inventor, AutoCAD * Expert in performing APQP activities like creating Boundary Diagram, Interface Analysis, CDIT and DFMEA at component/sub-system/system level Tool: MS Visio
JAH JAH PRODUCTIONS is a full service Architectural Services Provider. We provide surveys, planning, codes research, project management, shop drawings, construction documents, top notch designing, AutoCAD drafting services, CAD management and 3D renderings, Consulting, Computer Training, etc. We can put together a design/build team that will build out the creation you desire. With top designers, architects, drafters and construction tradesmen working together, JAH JAH PRODUCTIONS is able to provide Âthe best in ArchitectureÂ to any who desires. With a professional staff that is always growing JAH JAH PRODUCTIONS can perform any task necessary to get a project completed well and on-time. We have a team of consultants that can perform field surveys, produce CAD drawings that accurately reflect the space and its usage, or train you and your associates to use the programs and computers that are already in your office.
I studied architecture for 4 years. I am skilled in all Architectural Services. Home and Commercial Redesign, Architectural Illustrations (3d realistic images), CAD floor plans, photoshop, and graphic designing. I can also enhance basic photos and make them look better and have a high quality look to them.
Marie Christine A. Dado, is an Architect by profession thirteen years experience in the fields of Design, Production Planning, Client Coordination, Project Documentation, Design Visualization and Specifications Writing. Â Christine has had diversified working experience for both local and international projects from Design to Execution. She pursued her work on Design and Outsourcing locally and with Singapore and US clients. She was the Regional Design Manager for South Luzon 1 Malls under the SM Retail, Inc., CAD Design Support for the 2010 Shanghai World Expo for the UAE Pavilion, Project Coordinator for RSP Philippines or Resource Partners where she worked on a wide variety of projects in Dubai and the USA. She was also a Senior Architect for both FMP and Lor Calma Design Inc, was a Regional Architect for Luzon for Crown Asia Holdings Inc.
Presently working with Dango Dienenthal (India) Pvt .Ltd. a German group of Company, Manufacturer of specialized machinery for the metallurgical industry. My area works is: 1) Design & Develop 3D modeling. 2) Produce production drawing for manufacturing. Completed Project;- 1) Develop 3D modeling and Production drawing of a forging Manupulator 2)Static analysis of transfer trolley used Solid works for 3D modeling and ANSYS Workbench for analysis 3) Static analysis of ESP(Ducting System) used Solid Works for Modeling and ANSYS Workbench for analysis 4) Modeling of IW Welding Machine 5) Development of Radial Gate for Hydraulic Project 6) BLC Trolley Modeling and Assembly and animation of working principle
I am a Mechanical Engineer specializing in gauges, fixtures, sheet metal and much more. I am very proficient with Solidworks and Autocad. I have 10 years of experience in companies specializing in automotive, aerospace, military and heavy industrial sectors.
we offer creative and professional Graphics Design,2D or 3D Visualization for any size company.we offer professional service and fast output for your company and hopefully creating good business relationship with you and your organization. https://www.odesk.com/users/~0152384a8879ee53fc
Mechanical Engineering background; specializing in CAD/CAM Mechanical Design. Mechanical CAD animation and 3D rendering. Over 5 years experience in the aerospace industry; 3D Design of test fixtures/equipment and special tools, reverse engineering of aircraft components/assemblies, professional 2D Engineering Drawings and blueprints for in-house manufacture and DER repair submittals, devising repair procedures of aircraft components beyond standard rework limits, design and programming test set-ups of various aircraft components; including landing gears, hydraulics, gearboxes, valves etc., Quality Control inspection, documenting and release of aircraft components and assemblies, manual and CNC mill/lathe skills to implement product design, process planning, fabrication and quality assurance while utilizing CAD/CAM packages.
As a designer with engineering knowledge and a strong background in mechanical and manufacturing applications, I am confident that I can be a key asset to your organization. My proficiencies lies in my ability to create and read CADD drawings and renderings, and finding solutions to engineering related conflicts. Working with high end clientele such as NASA and Lockheed Martin has developed my skills in engineering/drafting. I possess leadership skills within numerous functional areas that include software engineering, application development, feasible analysis, integration and administration of business critical systems. Some of the key strengths I can offer include:
I am a Mechanical Engineer with extensive experience in mechanical component and system design. This includes 3D CAD model generation as well as drawings, component animation, photo rendering and FEA analysis. I can work efficiently to meet deadlines when necessary. I take pride in the quality of the work that I put out and make sure that my customer is completely satisfied.
Â¿ To give the training of solid works Class as a Team Member. Â¿ Job completion reporting. Designing and Reverse Engineering of Machines Parts, Automobiles, Textile and Manufacturing in the field of Mechanical Engineering. Â¿Estimation of Machines Parts, Automobiles, Textile and Manufacturing in the field of Mechanical Engineering. Â¿ Make different Parts in Orthographic & Isometric view. Â¿ Make Press Tool Design detailed & Mold Detailed. Â¿ Make Assembly & detailed Drawings. Â¿ Make BOM & BOQ Assemblies drawings. Â¿ Provide engineering design and guidance, along with existing team members, to Advance product definition. Â¿ To ensure that the given job is completed within the allocated time frame. Â¿ Calculate the weights of all in Working Parts. I have the working experience under the management of JAPANESE EXPERTS on the following SoftwareÂ¿s. 1. Solid Works 2. Pro,Engineer 3. Auto CAD 2007 4. Auto CAD 2006 Mechanical Desk Top (MDT) 5. Engineering Drafting
Trained Corporate professionals and Engg. Graduates on various 2D and 3D Design applications such as AutoCAD, REVIT ARCHITECTURE and AUTODESK INVENTOR over the last 2 years. My goal is to deliver the utmost quality and never compromise with it at any cost. I also have experience in Web Designing fields and have developed a couple of websites.
I am Architect designer with 7-year professional work experience in CAD drawing, 3D modeling, rendering and other visualization solutions
Experienced in machine and mechanism design. High speed assembly and test processes. Project management, including high contact customer relations. Various product automation of process, including automotive switches and sensors, bio-med, electronics, consumer products and PAP development. Product design Specialties:Excellent communication skills, both written and verbal. High mechanical aptitude, with regards to machine design and automation.
In previous work I have been involved in the design and static calculation of steel structures, using the software package Staad2005 for static calculation and AutoCAD to create drawings and technical documents. I worked on the preparation and review of technical documentation for the rehabilitation and reconstruction of existing AB and steel structures which I gained experience in the design of new and maintenance of existing facilities with experience in drafting the Bill of Quantities work and complete documentation for the implementation of public procurement procedures and obtaining construction and use permit. I also participated in the preparation of the Study ongoing maintenance of existing facilities.
Foblu Technologies is an Engineering Service Provider pioneering Software consultancy, Industrial Consultancy, CAD, Technical Training Services and 3D Printing Services. Our Specializations include Product Design & Development, BIM and Plant Designs.Our services are extended to reverse engineering and 3D printing. Team of Autodesk Certified Professionals work with the projects in varied streams of Engineering.
A degree in Bachelor of Engineering, specialising in Mechatronics and Robotics Engineer with 3 years of Instrumentation, Control System and Electrical experience in the Process, Oil and Energy Sectors. This is also complimented with some experience in Mechanical Manufacturing using Solidworks and AutoCAD
B.Tech in Mechanical with 3 years of experience in 3D and 2D designing on various CAD software's. Also has very good knowledge of CAM software's. Robust and highly energetic in nature. Ready to work on any time.
I`m a mechanical engineer who has begun to specialize in the design of piping systems, my main interest is to become an elite designer in Oil & Gas;IÃÂ´m skilled in AutoCAD, PDS and SP3D. Among my strengths are fast learning and proactive; which allows me to overcome any lacking of knowledge
Hi..Every One...My Self Ketan And I m From India..I completed my Interior Design Degree And I also Know to use software Like AutoCAD and Google Sketch Up For 3D
Overall 15 Years of CAD experience 5 years as an expert in Bentley Microstation as well as Tricad modules 3 years+ international project experience. Experience in CAD Drafts, Visualisation, additive manufacturing, Design & Engineering from consumer products to manufacturing lines. Experienced in projects ranging from single prototypes to manufactring plants as layouter, designer, coordinator and consultant. Form more informations feel free to contact me.
I have been working in Solidworks, AutoCAD & Inventor since last 8 years. I have work on large projects on sheet metal products, Cabinet desings, Electrical Control panels. I have great automation knowledge like design table, Drive works etc. in solidworks. Ability to work beyond your expectations.
btech degree from a reputed institution.....................Good in design using CAD.....
i work in the field of architectural design for nearly one year,i work with AutoCAD and 3Ds max to present my designs.
For about 5 years I am converting Sketches to dwg and dxf
Electrical Engineer (Micro & Nanoelectronics) with hands-on lab experience looking to work with a dynamic staff and put to use my practical skills to exploring new avenues thereby benefiting everyone involved.
expert in Robotbat, modeling and design steel, calculate steel with Eurocode design and calculate hopper design and calculate silos withn Eurocode Expert in Modeling 3D with soldworks, Autocad and Catia V5
Very good at working with CAD,3D MAX designing.Worked on different kinds of projects.
I am a Civil Engineer. I accept works related to autocad and civil 3d.
Project Manager with a knowledge of electrical as well as mechanical engineering in Material Handling
Currently working for a company that manufactures titanium parts as a 3D modeler, I was trained in industrial drafting. I have basic knowledge in the following topics : Material strength Industrial product design Geometric Dimensioning and Tolerancing I know Solidworks 2013 and 2014 + autocad. I can render and use thermic simulation tools. I'm looking for new challenges and a way to use my skills efficiently.
Radian has 4 years of experience in analyze with element finite: ANSA, NASTRAN, METAPOST, COSMOSM and mechanical design: CATIA V5, AUTOCAD 2D, SOLIDWORKS, SIEMENS NX, MATLAB, COBRA.