Automotive Work preferred ,all types be it a design or mechanical.
i am architecture graduate. I have 3 years experience in my career. I am knowledgeable in planning and designing architectural plans. I am also good in 3d modelling and rendering by the use of sketchup and vray software. I am using adobe photoshop software also for presentation.
I am an architect and work as a Project manager at my current office. I am from Toronto, Ontario Canada and have worked on High rise condos, small house, Commercial, retail and Industrial buildings Designing and drafting. I am looking for a part time income. I am a very hard worker and usually finish before the deadline provided. Even though I am new here, please give me a chance and I will provide my service for free just to test me out. Thanks for reviewing my Profile.
No problem. I can do it with cost you wish
My main field of work include geotechnical design, bridge designe and structural design.
I'm master degree Structural Engineer with 6 years of work experinces in structural and geotechnical design. I'm expert about: - Steel structure (seismic); - Reinforced concrete structure (seismic); - Seismic vulnerability analysis (masonry and reinforced concrete structures), ----after the recent earthquake in Italy (2009 L'Aquila and 2012 Emilia Romagna), I started to work a lot for the reconstruction; - Blast load analysis (linear and nonlinear analysis using time history function).
''Through chances various, through all vicissitudes, we make 'y'our way.'', Aeneid
I've good knowledge about pattern making, fabrics characteristics and sewing techniques. You can use my patterns to direct bulk production.
Mechanical engineer with 13 years experience in the automotive and aerospace sectors. I take rough ideas and sketches and turn them into engineered products that are ready for the next step in bringing your vision to life.
Perform civil engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities,
Hi, I am a new comer in this site and looking for a job. I have the capability to make any work successful. I am studying BSc and fluent in verbal and written English.
We are engaged in the design of heating, cooling, ventilation, gas in buildings, industrial installations for petrol pumps. We strive to design systems with renewable energy sources and implement technical solutions to environmental (heat pumps for the fuel economy of the soil, water and air systems for the utilization of solar energy, boiler pellets and chips, ventilation systems with a maximum recovery of waste heat, the collection and use of rainwater etc). We have experience in designing comfort ventilation systems for various types of buildings (indoor swimming pools, sports halls, industrial halls, production facilities, bars, restaurants, office buildings, etc.) as well as specific ventilation system (cleanroom ventilation).
Hi , I am a Engineering Graduate (Mechanical) and have an experience of over a year in Manufacturing industry. My experience involves Quality Analysis, programming,Design. I have experience working on various projects for manufacturing of Pumps, Injectors,AMT Parts & VCT parts. 5s,Kaizen,Poka-yoka ,six sigma ,SPC,MSA etc are the reports which i work on a daily basis. I have complete knowledge over the process control and the overall Working of CNC machines. My daily work also involves Quality Analysis/Quality Controls. I can work for 5-8 hrs every day 6 days a week. I am a quick learner and can do your task efficiently in the stipulated time. Apart from my technical skills i also have in depth understanding of various other tasks to be performed. ps:I can work in the following time zones EST,CST,IST
Extensive background in all phases of product development. Concept development, design, analysis, research, proposals, prototyping, value engineering, process development, fixtures, automation, and manufacturing support. Experienced in commercial, defense, industrial, scientific, and medical industries.
An outgoing, God fearing, understanding and hardworking diplomat who is capable of meeting deadlines, working under pressure and performing challenging tasks in an organization with minimum supervision.
Mechanical engineer from Serbia. Work as a high school teacher.
Good Morning Sir/Medam, I (Nagaraju.M) am working as a
I do my job to the required standard.
this is my 4th year at college, i study in Cluj, i am passionate in modelling, rendering, architecture, design. I made the project for the parametric pavilion from the main square in Cluj in colaboration with 3 other collegues and a few temporarly and interactive projects, i am dedicated for what i do.
If you need a person who will do a quality job contact me. I know the work of the programs listed below and I am able to quickly and efficiently get the job done at a good price. I guarantee that every job will be done on time and quality.
I have nine years of experience in the design and construction of residential and commercial buildings. I also design buildings and structures for the chemical industry and technical gases.
Gamer. Fast hands. Integrity. Responsible. Punctual. Friendly too! :)
Over the last 5 years, I have been teaching students, keeping on collage studies. Now also I am a fresher engineer working with the M.N.Dastur group but I want to keep on teaching mathematics as it is my hobby and it get me challenge and keep me updated by gathering experience and knowledge.I have developed good skills in MS-excel during my work on previous 8 months.I can also teach the mechanical engineering subjects as it keeps me remembered of the basics of all aspects other wise with work the other areas will be dull day by day. I am seeking opportunities to get challenges in all the above areas for you or your business.
Looking for part time jobs related to data entry. Mechanical Engineering consultancy projects. Expert in manufacturing defects minimization through statistical optimization techniques. 3D-computer modeling of mechanical components and CAE services
structural analysis and design of steel, conc and composite structures...
I am a young designer, innovative and committed. I have a professional degree in equipment design, and am currently studying at the University of architecture. I have experience in interior and exterior design, furniture design, equipment design, technical drawing, 3d modeling. Own capacity and knowledge to work shared web design, layout design, logo design, etc..
19, Metallurgical Engineering Student
I am an engineer with strong science&engineering background.
I had an experience at manufacturing of PCB for 13 years and I like design for Architect or Molding.
I am dedicated & committed & pride myself in providing the best possible service to my valued clients with services such as: General Contracting, Product - & Concept development, Installations, General Profile cutting (Plasma- Laser- & Waterjet), Bending & Rolling, Manufacturing, Mechanical design, Steel & Metal supplies, Maintenance, DXF generation, Fabrication drawings, 3D Modeling etc...
im a registered and licensed Filipino Architect. Drawing manual sketches and drafting computer aided drafting presentations concept boards concept sketches, schematics lay outing 3D model interior and exterior perspectives fast on time sharp
Maristeds is an acronym for Maritime and Structural Engineering Design Services, This is a firm of consulting Engineers based at the port city of Mombasa,Kenya. The company was founded in 1995 to provide consultancy services primarily in marine civil engineering projects. In the last 16 years since its has undertaken several projects in its core activity of marine civil engineering. It has also undertaken projects in water supply, structural design of buildings, environmental engineering and heavy duty pavements. Maristeds has undertaken many projects in association with other engineering firms thereby taping a much wider talent base. The company also retains several individual consultants on diverse disciplines
2013 graduate of Chattahoochee technical College with educational focus on drafting and drafting technology. Trained in complete set-up and operation of specialized computer assisted design programs to accommodate the production of detailed architectural and design blueprints of mechanical parts.
Junior structural engineer graduated from Faculty of Engineering Ain shams university Can design any steel or concrete structures I am working in Remco For Touristic villages constructures as a designer
Echelon CAE Services Pvt. Ltd. is a India based engineering service company, design center with expertise and years of experience in the Computer Aided Design and Computer Aided Engineering (CAE) services for the global engineering community. Echelon CAE Services Pvt. Ltd was founded in 2011. Echelon is a provider of Computer Aided Engineering (CAE) services to the global engineering community. www.echeloncs.co.in
I have graduated in May 2013 from IIT Delhi (M.Tech. in Engineering Mechanics). I have completed Bachelor
Experts in Interior Designing of Residential and Commercial areas. We use a lot of natural elements in our designs. Our USP is we are very punctual and deliver the designs as per time schedules. In 'Design-ism', we believe that the best designs are born from the client-designer relationship. If you wait until you have enough money to decorate your home, it will never happen. If you wait until you can afford to buy everything new, you are missing a point. It is the old, the new,the hand-me-down, the collected, the worn out but loved things in your home that will make it your own.
For the past 3 years, I have prepared Architectural and Structural drawings for a 33 storey residential building. I am currently working as an Office Engineer that prepares Contract drawings, Shop drawings, As-built drawings, Quantity Take-off and all other plans assigned to the department. I am seeking opportunities to help you and your clients finish the job accurately with high set of standards and meet deadlines.
I have a mechanical engineering degree and working in a reputed company in Mumbai I can do any kind of solid modelling and drawing rendering I can do fast and at an hourly rate of just $ 5 I can assure you that though my rate is small the output quality will be the best
I'm used to perform my work correctly and perfectly
At preasence I am working as roject Manager for offshore industry
10+ years in PCB Design Experience, RF, Digital, Analog, Power Supply. 5+ years of Mechanical Design Experience. Excellent understanding of manufacturing, integration, and assembly processes. IPC (CID) certified.
I'm mechanical engineering student. I'm good at engineering drawing and drafting and 3d modelling.
I am an interdisciplinary engineer/designer/developer. I can do web development work, my specialty is Python/Django. I can do engineering work like calculations, design, drafting, etc. I'm also an overall designer whether that's web design, documentation design, engineering design, graphic design, industrial design, and mechanical design. I like to approach my personal work using as many skills as possible to master them and to create beautiful, creative, and ingenious works. My interdisciplinary nature sets me apart from the rest! If you need something engineered or designed or coded or maybe a mix of all three, I'm your guy.
-Bachelor Graduate from Architecture Department of Universitas Sebelas Maret Surakarta December 2011 Work Experience -Junior Architect( Agawe Studio,Yogyakarta : May 2012-until now) -Tim Konsultan Desain Umbul Gemuling, Kab Boyolali (December 2011-February 2012)
I am the person who can help you generate and develop world class products that leap frog the competition. I love to work in a dynamic CAN-DO environment using hands-on R & D and Flexible work Environment/Structure. I want to be part of a team that has passion and clear common focus. I look forward to working with you.
I am a mechanical engineer and I have 6 years experience in 3D modeling in ??????????.
Gibbscam programing for aerospace company for 15 years 3 and 4th axis fadals mori seki and hass
Electrical power engineer
Mechanical engineer, expert in product design.
Design Engineer looking to learn more about Creative Design
The goal of my one-man design studio - elyjan.com - is to create a product which reflects the needs of the client flavored by creativity and fresh design. My name is Geri, and I'm working as architect and freelance graphic designer in Hungary. My favorite field within architecture is the 3D visualization and the connecting graphic and web design. In my portfolio you can see logos, flyers, brochures and websites prepared by me during the past 10 years.
As a mechanical engineer I am passionate about energy efficiency and resource conservation. My goal for every client is to get the best system possible for their budget. This means thinking outside the box on ways to meet energy code and design systems that provide superior comfort and save on utility bills. Experienced in commercial, institutional and residential HVAC system design.
Plastic Engineer Having Experience in Designing, Production, Process Controlling, Trouble Shooting, Maintenance, Mold & Die Design. Polymer Materials Application Expert. Specialist in Medical Devices & Drip irrigation, Food Grade PET Bottling Operations.
I'm a Master of Science in Mechanical Engineering specialized in Thermal Engineering, Power Engineering, Heat Loss and Transfer
3Dpresta provides 2D & 3D modeling services, on SolidEdge ST3 (Siemens). Expert in design of plastic parts, molds and mechanical design. Good knowledge of rapid prototyping solutions and 3D printing.
I am an architectural designer with 5 years of experience on sustainable architecture, interior design, & planning projects. I've focused specifically on sustainable schools and social housing. In 2007, I founded Architecture for Humanity - Chicago with (3) architects. AFH-Chicago focuses on design and construction services for non-profit clients. The basic mission is to provide well-designed spaces for communities which are typically under-served (lack of money, power, influence, etc.) After 5 years of working in Chicago, I'm living in Bordeaux, France. This city is incredibly beautiful and would inspire any creative person. I believe strongly in good design from the level of city planning and architecture, down to furniture and 2D graphics. Any created object deserves the utmost attention and care from its designer.
Mr. Suman Kota, an young Technopreneur, Post Graduate from NTU-Singapore, started Kota Corporation in the year 2008, to serve clients in initiating state of the art iconic projects. We Conglomerate technical, technological and business acumen to meet the present market needs and trends from creating trendsetting state of the art advice to Engineering and IT consultancy and from project management to complete coordination services. We are looking forward to creative, new or better ways to apply our expertise in all dimensions of our workmanship. We are set to the industry standard for client service. We are passionate about solving clients problems and exploring new avenues and opportunities with them. We are opted and chosen by the clients with our way of doing things: bringing complex to elegant simplicity issues, a unique approach, and focusing on innovative and sustainable solutions, helping clients to keep ahead in a world of transformation and globalisation.
Architectural Designer, Project Manager and LEED Accredited Professional with over 15 years working experience designing and managing projects through all phases of construction. I have been responsible for projects ranging from small residential to multi-million dollar educational and governmental projects. Currently, my focus is on mid to high end residential projects with interest in sustainable construction.
I'm a 36 year old Dutch mechatronics engineer that has been living in Australia for a number of years. Mechatronics is the combined field of mechanical engineering, electronics engineering and software engineering. I have 15 Years experience in mechatronics engineering, mostly in New Product Development (NPD). I have worked in the medical device business for about 12 years. I have designed and developed numerous medical devices in that time. Besides medical products, I have also developed road access products such as road blocks, road pillars, access gates, etc. Besides mechanical design, I'm an expert in programming extensions for Autodesk Inventor as well as extensions for Autodesk Vault (basic, collaboration & professional). These are the programs I use for my work.
I am Mechanical Engineer, having lot of experience in Design and 3D modeling, I am working in a private company as design Engineer, and 3D animator, I am looking for opportunities to prove my skills,
Career encompasses almost 5-year work experiences exploring the various specialties of civil design and construction from horizontal construction, hydropower facilities and land development design of commercial and subdivision projects with extensive experience in LEED project certification and consultancy.
IDM Group is a Hungarian organization for Interior designers, Architects and other creative professionals to collaborate on different projects.Our Target is to create sophisticated, deliberated and unique designs. We are working on different designing areas: hotels and tourism facilities, offices, restaurants, coffee shops, museums ,exclusive flats , private villas, family houses...
Freelance Interior Designer and Senior Designer at www.DesignEternal.com
A self proclaimed photographer, I am striving to become a distinguished professional sculptor of images. Griffspix.com is the showcase for a sampling of my spontaneous creations of complexity derived from an array of jobs, assignments, projects and personal work.
Solutions-focused, innovative Landscape Architect/Project Manager with extensive, hands on comprehensive project management background and an eye for scale, proportion and rhythm, as well as a strong expertise in business development, graphic and conceptual design. Excels in designing, developing and implementing key landscape architecture/land development projects on time and under budget. Effective communicator and liaison, known for building strategic partnerships and alliances. Highly versatile; quickly masters new roles, responsibilities, technologies and environments. Client Relations | Project Management | Business Development | Landscape Architecture Design | Master Planning | Site Inventory and Analysis | Programming | Site Planning | Zoning and Regulatory Approval | Mixed Use Planning | Illustrative Graphics | Hardscape/Landscape Design | Signage | Cost Estimating | Bidding Assistance | Site Grading | Presentations | Construction Documentation | Organization | LEED Design
i am a mechanical engineer.i have good skill in designing.my communication skill is very good.
As a qualified design engineer, with extensive knowledge of 3D modeling software and an excellent grasp of engineering and design principles and industrial design, I have worked in several industries. Currently working as Design Engineer.
I am an Electrical Engineer with more than 15 year experience with Extensive experience in FPGA, High Speed Board and Embedded software Design.
Experience in Electrical and Electronic Drafting: calculating or computing proper electrical loading and wires for specific wiring applications in steel and wooden structures -Architectural Drafting: perspective, site plan, elevations, roof plan, foundation, electrical plan, floor plan -Civil Drafting and Mapping: earthworks, plot plans, contour lines, highway layouts, mapping scales, and symbols, understanding location and direction bearing and azimuth calculations and conversion -Structural Drafting: drafting for steel and wood applications and covers beam shapes and identification, standard and seated-beam connections, sectioning fastening systems -Mechanical Drafting: use and function of mechanical and machine components. threaded objects, gears, cams, and linkages -Piping: single line drawing double lines drawing 3D
Bachelor of Architecture (2010) . 3 - Years Of Experience in Architectural Design & Interior Design. Expertise in various 2D & 3D software's. Rich experience in handling domestic & international projects. Excellent knowledge of architectural standards.
We are introducing our self as young, dynamic, enthusiastic and creative designers of interior and and civil. In today's world where lots of industries are playing leading roles in the field of interiors , we deliver our clients a wide range of designs which are different and best. We work on the prime thought to make our designs Eco friendly and close to nature.
i work as an senior architect and have 7 yr experience of presentations, concept development, design development and preparing working dwg for the execution of the project.
Electrical engineer specialize in communication.
A structural steel detailer with great deal of experience in preparing technical drawings with remarkable experience in preparing engineering drawings from concept to Construction, 3D Modelling, Bill Of Materials, general engineering calculations of structures like Refineries & Petrochemical plants, Power station & Desalination plants, Fertilizer plants, Cement plants, Bridges & platforms, High-rise buildings, Pre-engineered buildings, High voltageTransmission Line Towers, Sub-station structures, etc.
Good day everyone. I am Thivanan a/l Narayanan, a fresh graduate from Universiti Tenaga Nasional majoring in Mechanical Engineering. I graduated in early February 2013 with a 1st class honours degree in mechanical engineering. Basically I am a person who loves to learn and apply new knowledge and skills. Since I am a fresh graduate, I am seeking a right organization which will enable me to expand my engineering skills by handling various project and tasks. Although I am lack of experience, I am ready and willing to learn as much as possible from the superior who had been experienced much longer in real working field. By having a proper guideline and training, I can assure that I am able to produce work outcome beyond the expectation. I hope I will be a given a chance to learn and expand my career experience with this organization.
Thank you very much for reading my application and I am much honored to introduce myself here. My name is Adrian Deoanca. I am 42 years old and I'm from Romania. I graduated in 1998 the Faculty of Automatics and Computers from the Polytechnic University of Bucharest. Until now, I have learnt much. I learned the values of teamwork and commitment, how to win, how to work hard, how to concentrate and focus on goals, and how to balance my time and priorities. The passing years offered me a good chance to give full play to my creativity, intelligence and diligence. Thank you for your patience. Best wishes.
20 years manufacture, 15 years design & 5 years engineer experience. Multi-discipline design package experience. Design of Injection mold, extrusions, vac forming, milling, turning & welding. Experience of polymers, carbon fibre composites, aluminium & steels.
I appeared the examination of D.A.E Final Year and awaitng result. Now a days i am free so i want to get a better JOB .
Building Services Designer: HVAC, Renewable Energy Systems, Water Supply Systems, Wastewater Treatment Plants, Public Health Services, Natural Gas Supply Systems.
Controls System Designer
I have completed my Aeronautical Engineering in 2013 with some design software skills.
I have experience in the design of all types of products including but not limited to sheet metal design, pumps, blue prints, commercial and light residential building plans, structural connection design, etc. I am willing to help you/your business grow with my experience. I hope to here from you.
Basic knowledge of manufacturing process,lean concepts etc
EXPERT IN 3D MODELLING OF MACHINE ASSEMBLY & THEIR PARTS IN SOLIDWORKS,HANDLE LARGE MACHINE ASSEMBLY IN SOLIDWORKS
I have a degree in Industrial Design. I have several years of experience. I use Solidworks for my designs.
Hello friend.I'm francis and i look forward to work with all members here who may require my skills.Thanks and lets work together
Looking for good opportunity to enhance my skills in making 3d views.
We are boutique engineering company, providing state-of-the-art design, and engineering solutions for our clients around the globe. Our core values of Excellence, Trust, Relationships, Stability, and Passion are the foundation for everything we do you can visit us at :http://valleys.wix.com/etfdesign
Self-motivated with lots of experience in many aspects of electronics and Radio Frequency (RF). Prefer to do design work, but will also do repairs and upgrades on existing systems. Also capable to design and program PIC Micro and Atmel circuits. Currently working with SIM900 GSM modules.
I am an experienced electronic hardware design engineer. Working as a Lead Hardware Development engineer for an automotive electronics company, most of the circuits I design and/or analyze fulfills these requirements: sleep current, -40degC to 125degC ambient temperature, EMC compliance, and price-wise selection of components. Practitioner of Hardware Development Process A. High Level Design 1. Request for quoation (RFQ) 2. Advance Bill of Materials (aBOM) 3. Component Selection B. Low Level Circuit Design and Analysis 1. Worst Case Circuit Analysis (WCA) 2. Design Failure Mode and Effect Analysis (DFMEA) 3. Fault Tree Analysis (FTA) 4. Reliability Prediction Analysis (RPA) C. HW Validation and Testing I will be a great support in designing your product.
Currently studying architecture from a well know Pakistani University, NUST. Learning different 3D softwares and attended a Niel Leach workshop on Rhinoceros and Parametric design.
im graduate from a vocational school th 2011 in SMK Katholik St.Mikael Surakarta
Hi-Tech Outsourcing Services offers Engineering Design Services, Reverse Engineering, CAE Services - CFD & FEA and AEC Services - Architectural, Structural, BIM, MEP, LEED Consulting, Energy Modeling & Simulation services worldwide. Description We are your one-stop solution for specialized services in the domain of Architectural, Structural, BIM, MEP, LEED Consulting, Energy Modeling & Simulation, Sustainability Solutions, Electrical, Mechanical and Electronics engineering. Our cutting edge technological expertise can meet your requirements ranging from 2D Drafting, 3D Modeling, Designing to Animation and Walk through. We believe in partnering with clients to provide sound and affordable business solutions that help increase their profitability. So, while you concentrate on your core areas of business, we will provide you CADD services that meet international standards.
I like to finish the job with complete dedication, most importantly satisfying the client is the Primary Objective. I had worked on various Projects and I would try my best to help you out.
PIPING DRAUGHTSMAN MECHNICAL
I'm a license Civil Engineer in the Philippines,I want to be part of a company where I can best utilize and contribute my personal and professional competence and expertise as Bachelors graduate, engaging myself to tasks that will encourage creativity and initiative for the mutual benefit of the company and myself.I am a fast learner, hardworking and willing to perform a wide variety of duties and responsibilities with accuracy and speed under the pressure of time-sensitive deadlines.Self motivated in instituting and conducting all phases of offices procedures, organizing and coordinating project for maximum efficiency. Ability to work independently with creative improvements, which allows a better management work flow.