A chartered chemical engineer (MEng, PhD, CEng, MIChemE) with over 10 years of experience in chemical product design and chemical process development gained within R&D leadership roles in industry/academia. Extensive experience as an independent consultant providing value-added expertise and technology transfer to multinational companies and SMEs in the pharmaceuticals and materials sectors. Over 7 years' experience lecturing at university level in chemical engineering courses, including: mass transfer, separation process, chemical process design, chemical product design, reaction engineering, chemical process safety, waste minimization, ISO 9001 quality management, ISO 14001 environmental management.
I have completed 3 out of 4 years of my master's chemical engineering degree at a top russell group university in the UK. I'm very smart and work very fast, possessing multiple skills.
A professional engineer with expertise in Oracle Database administration,scientific research,food technology and general computer skills.
I'm a chemical enginner and I have experience in modeling of industrial processes in matlab. Also, I can do translations from Spanish to English
12 years post-PhD. PhD in analytical chemistry with biology/biotechnology and environmental chemistry experience and knowledge. Experienced grant writer (over $1.8 M secured in the last 8 years). Great math skills. Also available to work on projects involving research into scientific truth/content verification. Can evaluate scientific claims in proposals or business plans. Great knowledge of scientific vernacular and able to translate scientific concepts into layman's terms. Experienced educator who can assist with writing educational grants, texts or exam/quiz questions. Great proof reading skills for scientific manuscripts.
I'm am a fresh graduate and me with my two more friends,one a software engineer and other bachelors in English have joined hands together to produce something phenomenal.. We can and will deliver great results with a process thatÂs timely, collaborative and at a great value for our clients..
I am a B.Tech Chemical Engineer and currently working as a process engineer. I have expertise in material and energy balance and other equipment sizing calculations for heat exchangers and condensers, tray hydraulics in distillation columns etc. Delivering quality output within the stipulated time at reasonable working rate is assured. Your work would be given priority and the amount of time quoted / decided will be followed with utmost discipline.
I have 37 years experience doing process and project engineer for various engineer firms and production industrial groups in Mexico, like Foster Wheeler, ICA, SENER, CH2MHILL, Grupo GIRSA. I can make process analysis, process preliminar calculations, review designs, write process descriptions for biddings, etc.
We have experienced post graduate experts ( engineers, scientists, researchers, scholars, chemist, etc.) in the fields of Chemistry, Human Science (Psychology), Environmental Sciences, and other natural sciences. We always welcome to a challenging environment. We can explore innovation, creativity and outstanding performance for those who are interested to get our services.
I am a doctoral student in chemical engineering at Case Western Reserve University in Chemical Engineering. I study the high performance computing methods to solve problems in electromagnetics and molecular dynamics. I defended my M.S. thesis in Chemical Engineering on the OLED technology in July 2012.
Fresh Graduate Chemical Engineer seeking an entry-level position in the Engineering Department within the fields of process control, instrumentation, manufacturing, EPC, project management, and designing.
I can work on all the listed skills
I have a Master's Degree in Chemical Engineering from the University of Rome ÂLa SapienzaÂ and a PhD in Engineering Sciences from the Technical University of Graz. I have an excellent understanding of thermodynamics and transport phenomena, as well as typical chemical processes. My PhD thesis was focused on renewable energies and in particular on the development of a new technology for biogas utilisation; the technology I studied has been patented in 2008 by the Austrian Patent Office. I have a solid experience as Process Engineer in EPC (Engineering, Procurement, Construction) projects in fields such as Petroleum&Gas, Power Plants and Chemical Plants; this job has provided me with an excellent understanding of the complexities and different phases of a project and has allowed me to develop the ability to handle unforeseen problems and issues effectively and efficiently.
BEng, PhD chemical engineering from Loughborough university December 2011. CAD Modeling simulation of engineering, biomechanical and biopharmaceutical processes. This includes transport studies in skin and structural analysis of solids 3D and 2D design and animation using CAD and FEA Process flow diagrams and piping and instrumentation diagrams Formulations for topical and transdermal applications. Technical writing: scientific contents, training/ tutorials and proposal writing. Software: autocad, autofem, comsol multiphysics, skin-cad, Microsoft excel vba, matlab...
My work experience ranges from design and start-up to trouble shooting and rework. I have worked as part of team to design hundred million dollar chemical plants that are currently operating. I have worked individually to evaluate small start-ups. In several days, I reviewed and came to the conclusion that an idea was not economically viable as a start-up. The project was continued by a team that was never able to bring economical prototype on-line. In New England (USA), I perform hands-on work, trouble shooting and other non-design services. I have been called on when multiple firms could not resolve an issue causing multiple batches to be lost over nearly a year. I resolved the problem in a day. I have found fire and explosion hazards being ignored and bypassed by a vendor for nearly a decade. When I was a junior contractor, I provided custom controls software that had a fraction of start-up issues the regular senior engineers had previously provided.
I bring a broad range of technical expertise and a willingness to learn and adapt to new fields and new technologies. In addition to my chemical engineering coursework for my degree at NCSU, I have years of experience in developing C++ software and PHP/SQL-based websites. Whether itÂs engineering a workaround to an unforeseen circumstance or laying the framework for an enduring design, I have the skills and experience to get the job done.
Research is key for consultation, I have been acknowledged as an excellent researcher from leading institutes of my country. Degree in Chemical Engineering with specialization in Operations and Management, and MS in Process Engineering makes me extremely suitable for cost effective modifications in existing processes and development of new products with increased profit margin as well as improved quality.
Hi my name is Deja Gordon. I have a Master's and Bachelor's degree in chemistry. I always had a love for science and numbers, which ultimately developed into my love for chemistry. I have a vast knowledge of equations, formulas, elements, reagents, structures, and instrumentation. I will provide fast, accurate, and efficient solutions to my clients. I gain self satisfaction knowing that I helped someone while doing something that I love at the same time.
Myself Dharam Panchal. I am final year Bachlor Chemical engineering student. I have excellent browsing knowledge of internet. I have also the knowledge of Basic fundamentals of Chemical engineering like fluid flow, process industry & equipent design.
I have an extensive article writing and editing experience of over 5 years and I always guarantee fine quality work to my clients up to their satisfactory. I have been doing article writing, technical writing and done several advertisement writing as well as web content developing for both online and local clients.
Experience in quality control of polymers, plasticizers, Metal Power, organic and R&D materials Report writing, Plagiarism check through TURNITIN Success in process development through R&D Experience in operating state of the art instruments Creative and well organized Strong problem solver Team coordination for conducting R&D tasks, QC/QA, Process Control & Safety activities Lead Auditor ISO 9001:2008 QMS, OHSAS 18001:1999 Experience in assessment & validation of calibrated instruments w.r.t Z540.3-2006 & ISO 10012-2003
Problem solving is my passion. I always enjoyed science, maths, and technical things as a kid. After seeing how much I enjoyed it, I decided to major in mechanical engineering and earned an undergraduate degree from BUET. Currently i am pursuing an M.B.A. degree. I am an entrepreneur. I believe life is really not that complex. you just have to figure out what you love most and i love designing. The more complex the design, the more the kick for me. If you want to get the job done as the way you thought, then I am your man. Though i am new on this platform, I have many past experiences in the field of 3D & 2D designing, rendering, drafting, critical problem solving, product designing etc. Don't forget, for every complex problem there is a simple solution. So talk to me any time if you want to share your problem. I believe , together we can solve anything :)
We are a group of Civil, Mechanical and Electrical engineers with a strong subject knowledge. Backed up with 3 Innovative, Experienced and Qualified brains. Our capability is to fully feel and understand our Client's requirements, needs & dreams and engineering them into reality and facts, upto the client's satisfaction, inline with statutory requirements with best of quality, in provided timeframe.
Mr. Rose has more than 25 years experience in the design and failure analysis of components and equipment in the water, wastewater, chemical, and petroleum industries including hundreds of forensic cases. His expertise covers consumer and industrial sectors including household appliances, water filters, water softeners, expansion tanks, fire sprinklers, boilers, cooling towers, oil & chemical storage tanks, pressure vessels, conveyors, power transmission components, large pumps, and all forms of piping. He has designed major components, equipment and miles of piping subject to extreme environmental conditions for large chemical, petroleum, and wastewater treatment plants in every state in the U.S. Additionally, he has extensive training and experience in material science with focus on failure analysis including fracture surface analysis (fractography), metallurgical failure analysis, plastic failures, paint & coatings failures, and corrosion.
Do you want to cut down your firm's operational costs? Or do you need help managing people, material, machines, processes, operations, logistics and information? Or do you need help optimizing your production or service provision? Being an Industrial and Manufacturing Engineer, I can solve all your problems. Be it managing patients in hospitals, reducing wait time in restaurants, minimizing queue time for rides, designing new products, manufacturing cost effectively, devising inventory control and management, eliminating wastage, enhancing quality, optimizing logistics or improving productivity, I can help provide the most effective way of doing any of it.. Having also learnt about marketing, business, financial and managerial aspects of any manufacturing firm and service provider in my Industrial Engineering program, I can provide the best solutions covering all aspects. Always looking for challenging problems, so don't hesitate. "There is a solution to every problem."
Know-how - more than 40 years of experience in Machine Tool Industry. Mechanical Engineering, Mechanical Design, CATIA, SolidWorks, Creo Elemenst/Pro-E, Autodesk Inventor, AutoCAD, Solid Edge. We are a strong, professional and very flexible family-based team, a team of highly experienced freelance mechanical engineers. We are the perfect partnership for competent, flexible and reliable services concerning: - Mechanical Engineering - Mechanical Design - 2D and 3D Modeling - Assembly Design - Surface Design - Sheet Metal Design - Research & Development Starting with the most simple projects up to the most complex ones, we can offer you the best solutions, efficiency and value at the lowest possible costs. Everything is made to suit your projectÂs requirements. With our experience, competence and discretion, we create confidence and a lasting benefit for our customers. For details, please see - Portfolio.
Over 6 years multi-disciplinary and diverse professional experience in oilfield chemistry including chem. lab analysis for different field fluids ; crude oil , lube oil, formation water and injection water with highly sensitive instruments ICP-OES , FT-IR , UV/ Vis, XR-F and production chemistry problems including scale deposits , corrosion , microbiology and field chemicals , backed by extensive hands on experience and academic background.
I am a freelance technical consultant with a PhD in Chemistry and over 20 years experience in Chemical formulation, Adhesives, Coatings, Pharma and Medical Devices. I have led a number of research projects during this time where practical outcomes and cost control were critial and thus I am very result oriented. I have also worked on a number of reverse engineering projects in the polymer space. If you engage my services you can expect to work with a professional, with high quality technical expertise and excellent communication.
I have more than 10 years of polymer development experience ranging from resin to end application in paints, coatings adhesives and market. During this period I have worked 200 recipes of alkyd, Phenolic, acrylic, polyester for paint and adhesive applications. I have developed 20 acrylic emulsion recipes, 10 solvent based formulations for construction and decorative applications. Our employers were facing raw material scarcity due to high prices in petroleum feed stock , we moved towards replacement petroleum feed stock with natural renewable chemicals like cardanol and curcumen west in Phenolic resin , epoxydised soya oil as reactive diluents in acrylic resin formulations . I love clean and pollution free chemical synthesis, so that I like renewable recourses instead of petrochemical resources, in this regards I am working on vegetable oil based adhesives, vegetable oil extraction methods and adhesive traps for insect and mosquitoes.
I am a highly skilled electroanalytical with an extensive knowledge in research and development of electrochemical characterization, surface coatings, corrosion, analytical skills, Synthesis, Purification, Physical and Chemical Separation and organic formulation. I am always eager to learn new skills and deal with challenge projects. Skills: Characterization, Analytical Skills, Electronic and Optical Properties, Organic Chemistry, Inorganic Chemistry, Coatings, Electrochemical & Chemical Calculation. Laboratory Instrumentation Skills: UV-Vis, LC/MS, LC/MS/MS, GC/MS , IR, FTIR, HPLC, TLC, TGA, DSC, Chemical separation and Purification, Ellipsometry, XRD, XPS, AFM, STM, Brewster Angle Microscopy, Langmuir- Blodgett Film, Spin and Dip Coatings, Potentiostat, Chronocoulometry and Cyclic Voltammetry. Note: I have access to most of these instruments.
Having excelled in the chemical and automotive industry for over thirteen years, IÂm currently seeking a rewarding opportunity where my advanced technical knowledge, analytical and interpersonal skills would prove highly valuable. I am passionate about meeting and interacting with customers, engineering, quality control, technology, as well as new product development. IÂm looking for a position in a highly stimulating environment, where I would have the opportunity to go beyond customerÂs expectations.
Over 4 years, I have an experience as a Process Engineer, and 2 yearsÂ experience as a Process safety Engineer. As a Process/Process Safety Engineer I am experienced with Preliminary, Feasibility Study, FEED, PMC, and Detailed Engineering Design (DED) Project for oil and gas surface facilities. and also have an experience in design oil and gas onshore plan, station, and pipeline. My core competency lies in complete engineering design, provide simulation design using engineering design software such as ASPEN HYSYS package, Pipenet Studio, and calculation sizing for equipment at static equipment (vessel and pressure vessel), rotating equipment (pump, compressor package) and utility system.
I'm 28 years old. I've got two B.Eng's, one in Chemical Engineering and another one in Mechanical Engineering, I'm a lecturer at the local university and also work full time as a manufacturing engineer at a medical device company. I'm currently planning on traveling around, so I'm trying to save up as much as I can.
Design; Monitor; Maintenance; Operate RO units with different pumps, energy recovery devices (trubo charger , pelton wheel , PX). Water pretreatment for open intake , beach well feed water . Chemical cleaning for membranes scaling and fouling .
I offer to develop chemical processes and formulations. I would also like to offer teaching chemistry and chess. People should hire me because I have been doing these activities for considerable amount of time of my life and I would be able to give justice in these fields. Although I have not got a title you can check my FIDE rating on the web site.
Studying Chemical Engineering from NED university of Engineering & Technology Karachi, Pakistan (2012-present), Intermediate in per-engineering, completed internships two at General Tyre & Rubber Company Pakistan and Lucky cement plant.
ÂQualified engineer with excellent organizational and team working skills. ÂAbility to coordinate activities and resolve issues among proponents, contractors and other parties to allow construction activities to progress according to plan and final chemical and mechanical completion. ÂAssist other engineers in solving problems beyond their specialty. ÂAttend to daily, routine and unplanned work activities. ÂPrepare and present reports and proposals. Â Interface with other internal engineering disciplines (mechanical, civil/structural, electrical, instrumentation, automation, architecture, etc.) to ensure coordinated designs are going on. Â Responds immediately to all work requests which concern Health and Safety. ÂEnhance standard work processes and business flow. ÂConstruction support activities including responding to submittals and RFIs. ÂIssues equipment clearances and work permits. Develops and implements plant operating procedures.
Experienced in Assembly, C, C++, C#. PIC, AVR, ATMEL, MSP430, OMAP, LPC. High speed memory (NAND, SPI FLASH). RF (TX/RX). Embedded design.
I finished my Ph.D studying in Microsystems technology, from Department of Physics, University of Oslo (Norway). My Ph.D project is about the design, fabrication and test of 3D MEMS supercapacitors with conducting Polypyrrole films as electrodes on silicon substrate. During my studying period, I have accumulated the knowledge about nanophysics, electrochemistry, conducting polymer and MEMS technology, sharpened my logical thinking to provide proper solutions to solve problems, improved my experimental abilities both in chemical lab and clean room, and handled materials characterization methods such as SEM, EDS, XRD. I developed strong ability to work independently, and achieved some accomplishments as first author; I am also a good team-member that collaborated with my colleague to published 2 academic papers. I also have industrial experiences which manufacture ceramic based fuses and supercapacitors.
I graduated Biochemistry and Biology (postuniversitary studies). I have a master degree in Biotechnology. I was a biology teacher for six years. I have a five years experience in Quality Assurance, HACCP, GMP and hygiene in baker's yeast production. I have two years of experience as an ISO 9001 auditor. I have experience in test planing and evaluation of results, data analysis and reports, chemical and microbiological methods preparing, checking and improvement. I was a food safety, food factory hygiene trainer, contamination and pest control trainer, hygienic design of food industry equipments trainer. I use and design databases. I have very good Excel Skills, because I was extracting from very large databases all the information I need to prevent contamination problems. I was trained for three weeks by a SES-Expert (Senior Experten Service) on food safety, HACCP, pest control, contamination, food safety legislation.
Cover letter -BSc Biotechnology / Bio-Molecular chemistry. - Faculty of science -Cairo University. - I had my summer training at the center of excellence Â National research center. Trained on all biotechnological applications there:- Plant tissue culture, Fermentation, Purification (HPLC) high performance liquid chromatography and nanotechnology lab. -My Graduation project established at the biotechnology unit in the national research center Enzyme production ÂInvitro catalase production from penicillium chrysogenum using Bioflo 310 benchtop Â BioreactorÂÂ. -Worked as Research assistant with Dr. Mahmoud Elhefnawi in his group biomedical informatics at center of excellence Â National research center. -My recent activity is analyzing my own whole genome. - I'm offer High rate work, defined and innovative that why client should hire me.
Expert Chemist and Pharmacist specializing in Gas Chromatography, Food, Pharmaceutical and Environmental Chemistry, Sterile and Nonsterile Drug Compounding, Project Management and Nuclear Pharmacy.
Master's in Chemical Engineering (PhD on-going), International Desalination Association Fellow, Expert in Desalination and Membrane Science viz. RO/UF/NF membrane productivity improvement, membrane cleaning, projects etc.
Professional Chemical Engineer with more than 5 years of experience in oil & gas company. Available for different queries. Focus and deliver on time!
Chemical Process Engineer having +02 year of experience. Strong skills in practical troubleshooting and easy to implement optimization schemes for existing Oil & Gas units. Detecting the bottlenecks and troubleshoot systems accurately and repair breakdowns quickly to maintain operating efficiency. Specialties: DCS and ESD based systems PFD's and P&ID's Process Optimization Plant Start-up & Shut-down activities Gas Sweetening and Gas Dehydration MDEA and TEG based gas units
I am chemical engineer having three year of experience.I have strong techanical background of Oil and gas. I am a young energetic engineer currently working on Oil and gas projects.
I am lecturer in chemical and process engineering. I have a PhD in environmental/process engineering and a bachelor honors degree in chemical and process engineering. I have published in international journals in the area of environmental science and engineering and am currently conducting research in the areas of environmental engineering and renewable energy.
PhD in Chemical Engineering, 30 years experience in industry. Technical presentations at national conferences for projects utilizing Mathematica and Comsol Multiphysics.
I Graduated with Chemical Engineering, Presently working as a MEP ,Mechanical engineering in Dubai, But i want to survive in Chemical engineering field only to show my 100 % abilities and my skills what i learnt in my graduation. So please give me the chance to prove my self.
ÂTwo years of experience managing three different component development groups in the field of engine oil additives. ÂNine years of experience as a pharmaceutical process research and development chemist. ÂExtensive experience in multi-step organic synthesis, purification and characterization of new drug candidates and intermediates from the gram to kilogram scale. ÂLed the successful completion of a $500,000 cGMP campaign with a total of $1M of work completed for a single client within one year. ÂAcquired a failing 2 yr old $1M project which was then successfully completed within 4 months and resulted in repeat business. ÂExcellent leadership and problem solving skills. ÂExcellent oral/written communication and presentation skills. ÂHighly motivated/productive, result-oriented and able to function both independently or within a team environment.
I've spent the one year in paints industry in production department and eight months working full-time as a chemical engineer for a research company that specializes in industrial research. During that time, I've logged thousands of hours doing everything related to the industrial process, including batch production, designing and fabrication of different equipment, chemical synthesis in labs, and quality assurance. I currently manage a number of teams of Scientists and Industrialist who work on a variety of different research and development projects, and I ensure that the quality of every effort meets our high R&D process standards. I'm also very familiar with different software and have no trouble in learning new ones.
I have a Bachelors Degree in Mathematics from UC Davis and I was employed as a maths/chemistry tutor for three years by the university. Dynamic and drive, I am dedicated to inspiring success and welcome the opportunity to further you in your studies.
Chemical Engineer with experience in modelling of multiphase flows, process design and development
Do you have a Chemical Engineering job and are looking for a talented and experienced Chemical Engineering Engineer? I believe that my experience and skill in this background will prove to be of great help to you. I have worked as a Chemical Engineering Engineer for many years and my skills and experience will prove useful to your work. I am ready to start working on your job today.
I am basically a student of Chemical Engineering. As a student of engineering i can serve you what i have learned. you can hair me to help you out in solving your assignments, projects etc. relevant problem.
I am Masters in Chemistry from the best college in India, having teaching experience of over 12 years. I have guided over 3,500 students on one to one correspondence basis at School/University level. I also have keen interest in Mathematics and Physics. I deliver my work very fast and accurately. I am in constant touch with my clients for full satisfaction.
MSc and BSc in chemical engineering, having experience and expertise in industrial safety, risk assessment, risk analysis, consequence modelling, SIL verification, active and passive fire protection for oil and gas and chemical industry. Have working experience with relevant standards of API, NORSOK, ISO.If you are looking for help in your project, I can help you. I have experience in designing PFD, P&ID, Material and energy balance for chemical industry and academic research experience in @Risk, Mathcad,CFD (ANSYS CFX, Openfoam), Matlab, Statistics R, Numerical simulation. Have experience and interest to do any Microsoft office, Autocad, Technical writing or Blog writing project. Have multilingual capacity in English, Bengali, Norwegian and Danish.
I am from Indian Institute of Technology Guwahati doing 3rd year B.Tech in Chemical Engineering. I
Expertise in Organic Chemistry, provide lectures to students. Around 8 years experience in industry.
I am experienced in design,production,process calculations,AutoCAD and simulation softwares in the field of chemical engineering and mechanical areas.
I am currently an organic chemistry student at Adams State University. I have had a strong interest in chemistry since I was a junior in high school, and I have never taken a break from learning new things about the topic. My concentration is on synthesis of high explosives. Since high school I have only ever received A's in chemistry, and this is something I strive to continue throughout my college career.
Through my work as a Product Development Scientist, I brought over 20 products to market through concept development, formulation, stability, package design, scale-up and regulatory overview.
I am a chemical engineer with 4 years of industrial experience in process optimization and process analysis. I also have experience in Aspen plus and HTFS
I am subject Expert in Chemistry. I provide my mentoring and online tutoring services for projects, reports, Notes, Presentations, assignments, quizzes, online courses, exams and related tasks at fairly reasonable price well within deadline provided.
Highly proficient with advance qualification in all aspects of oil & gas, chemical, mechanical and design engineering.
15+ years chemistry experience, proficient in HPLC, IC, NMR, FTIR, UV/Vis, standard wet chemistry, formulation chemistry and environmental chemistry.
I'm industrial chemist with the relevant knowledge various field of chemistry like environmental chemistry, chemical kinetics, reactor design, organic chemistry. I also have skills in biochemistry like structures of biomolecules, proteins and enzymes and carbohydrates. In addition to this I have skills in basic computer knowledge, Microsoft word, Microsoft Excel, Microsoft publisher, Microsoft powerpoint, computer programming and data structure. To offer quality services to my customers are always my aim. Hire me for your work and you will regret your time and money.
I am a Mechanical Engineer based in Australia with experiences in building services design (e.g., HVAC, fire fighting, fire alarm, smoke control, smoke management, plumbing and gas systems design), chemical refining design (e.g., process plant mechanical systems design and piping systems routing, quantity surveying and stress analysis) and water and wastewater treatment mechanical and piping systems design. Additionally, my field of specialization and expertise is in fire safety engineering relating to fire fighting and alarm systems (active and passive), smoke control and smoke management systems, LP-gas systems design. These specializations can be in design, project or design evaluation and engineering.
I am an Italian Senior Chemical Engineer (specialized in Biotechnology) currently working in England. For this reason I am very comfortable both with English and with Italian languages. I have ~15 years experience in FMCG industries, such as cosmetics, detergency, pharma, plus solvent recovery, hazard management, health & safety. I worked in international environments and covered all stages of product lifecycle, from the initial marketing brief to product development, lab testing, turnkey facilities new product introduction, product development, GDO auctions, decommissioning.
Masters degree holder in Chemical Engineering with background in Oil and Gas industry. Excellent project management skills in the energy sector. Worked on emission reporting, title V environmental paperwork, line sizing, equipment sizing and datasheet generation. Designed Compressed Natural Gas fueling facilities and biogas upgrading facilities.
PhD holder in environmental chemistry , a chemical engineer , i worked as an HSE in a gas plant and for the moment I'm a home-stay mother i can translate from English to french and Arabic
I have a wide background in environmental chemistry, environmental toxicology, and the fate and transport of contaminants in the environment.
A classical Chemical Engineer with masters degree in chemical engineering practicing since 1984.Versatile in production of industrial chemicals with much interest in research and product development
I am Ph.D organic chemistry. Expert of chemistry.
I have finished phD in chemistry
Iam Sadia Haider , I have done my FSc pre-engineering from Punjab College of sciences Lahore with 87% marks, and now a graduate of UET lahore as a Chemical Engineer with A Grade I offer my all services including Chemical Engineering knowledge , Microsoft office knowledge , writing skills in English to you . Iam self motivated , analytical thinker , can work under stress , multitasker and a hard working women .
Master degree in Chemical Engineering, I have experience using MatLab, Phyton, AutoCAD, Visio, and Photoshop. I am also involved in wide range of research such as process & reactor design, water treatment, enzyme production, and lignocellulosic conversion.
Chemical Engineer,softwares:'ASPEN PLUS,MATLAB,'Microsoft Word and Power point
Hi! I'm chemist Engineer. I have 7 year working experience and M.S. degree of chemist-engineer.
B.S. Chemistry 30 years experience in formulating inks and coatings. Ink Jet Printing expertise. Liquid & Powder Paint expertise. Resume' available upon request.
-A Ph.D. in material science with 6 years job experiences in cosmetic formulations, synthesis and production of cosmetics materials. -Extensive experience on analytical chemistry (LC-MS, HPLC, NMR, IR). -Worked on projects of marketing strategy for cosmetics products.
I am a Chemical Engineer with a profile more related to Mechanical Engineer. I love design. Thermodynamics was always my favorite subject. I love design mechanical pieces and understand they energy and mass flow.
I'm a scientist by heart, being rational and upfront in all cases. Having a unique set of logic skills coupled with a desire to gain more knowledge makes me a person fit for the engineering field. In my own free time I design, manufacture and even experiment with weapons, improvised devices and even chemicals as is my passion. Mostly I do research on nitro-organic compounds... I like to blow stuff up to relieve some stress. This all said, there is still a part of me that is kind, loving and caring
Experienced environmental scientist/engineer with established track record of academic publications, professional experience in water quality assessment, organic contaminants chemistry, water treatment, and microbial risk assessment. Strong skills in filed sampling and laboratory analysis.
I help people craft their new product formulas and create their next generation brands. My academic training and professional expertise is at the intersection of Science and Business. I have worked as a formulation chemist, sales representative and product marketer. I have helped commercialize profitable products for the companies I have served and enjoy engaging customers on the merits of these new, complex, or unfamiliar solutions.
I have a degree in Chemical Engineering and basically, my skills involve laboratory and chemistry related jobs. However, I have been exposed in report and technical writing as an essence in my present and previous jobs. I am adept in computer applications specifically MS WORD and EXCEL so, I believe I can handle typing and basic computer jobs.
I am a master majoring in Chemistry, and have over 7 years working experience in chemical engineering & oil refining industry. I have interpreted several technical meetings for ExxonMobil, Fluor engineering with Chinese companies. With a strong technical background, I have a better understanding on technical issues during translation and interpretation.
Well I am a Chemical Engineering by profession in my last year of studies and doing all my courses and projects with great distinction. I have a real good command in some of my courses like Material Balance, Fluid Mechanics and especially Mathematics. Actually Mathematics is the most favorite subject of mine from childhood. I have a real good command and knowledge of Trigonometry, Calculus, Geometry, Algebra, etc. Other than that I have an exceptional knowledge of MS Office, knows everything about WORD and EXCEL and above all have a real good typing speed, as typing comes natural to me.
I am a Chemical Engineer, with skills in equipment design using autoCAD, Plant 3d, PVelite, and simulation using ASPEN Plus, ASPEN Hysys, PRO II.
BSc. in Chemical Engineering with knowledge in petrochemical process (MVC Plant) Knowledge in Olefins, Oil and Natural Gas.
Been formulating for two years. All the way from Home Care, Oral Care, Skin Care, Hair Care. Also recieved an award for undergraduate research on Alkaloidal Extractions of Uncaria Tomentosa (2 year independent project).Worked with many other plant extracts. Also have taught organic chemistry labs for four semesters. so my wet organic skills are good.
With experience in research along with a demanding position in the oil & gas industry, I have a vast amount of experience that makes me a unique and valuable chemical engineer.
Chemical Engineer with experience in research, development and analysis of personal care and cosmetics products. Hands-on experience on retaining a specified standard of quality while keeping production costs minimal. Capable of using applied research and problem-solving methods to obtain the underlying cause of any chemical-related failure.
Chemical Engineering from University of Castilla La Mancha (Spain), and specialised in process engineering. I worked at TWI (Cambridge, UK) as Integrity Engineer. I was developing asset integrity assessment products and services as part of the Non-Destructive Testing & Asset Reliability Group. I also worked at AQUADEUS (Spain).I was part of the chemical team where my duties were the analyzing and characterization of chemical samples solutions. During this time, I was responsible of writing technical documents in order to develop a warehouse for chemical storage and carried out different quality controls based on chemical and mechanical tests
I am overed with my Msc course work and resarching in the field of organic and my passion is to teach students of 10 11 12 class subject related to science specially chemistry.
Graduated from Stevens Institute of Technology with Bachelors of Engineering in Chemical Engineering. Currently pursuing Masters of Engineering in Systems Engineering. I am a Java/C++/Excel VBA hobbyist.
I have done my PhD in synthetic organic chemistry from National Chemical Laboratory, Pune, India and followed it up with a year of Post-doc from the University of North Texas, Denton, TX. I have been associated with Contract Research Organizations for the past 10.5 years. During this tenure I have worked on various heterocyclic compounds. The projects handled were for top global multinational companies as well as small biotechs. The projects handled varied from Kinase inhibitors to molecules for photodynamic therapy.
Scientist in Organic Chemistry. 2 years of experience in university labs. 2 years in nanomaterial photocatalist and nanozeolite
I am a Professional chemical engineer having completed my M.S in Chemical engineering from Lamar University , Texas , USA. Currently I am working in India at Chempro expertise pvt ltd a Leading Engineering and Management Consultancy in the Field of Petrochemicals and Oil and Gas Industry for the Past 35 Years. I have the experience of Handling overall Project as i was also working as Project Engineer so having a experience in Equipment Layout, Instrumentation and Overall Plot Plan.,
I have worked as a chemistry teacher in the Central University of Venezuela for 5 years