Licensed Professional Civil and Structural Engineer. Dependable, friendly and quality-driven, with 20 years of career experience in Civil and Structural Design, Technical Report Writing, Non-Technical Content, Business Proposals, Client Communication and Project Management for small to large commercial clients. I am very comfortable working on projects with recipients who demand precise and professional results. *Licensed in AZ, CA, CO, FL, MN, NM, NV, TX, PA.* Looking forward to working with you!
(1) I am a civil engineer with sound knowledge of Structural Designing Quantity Estimation Quantity Take off Mark up plans programming of engineering software on VISUAL BASIC,VISUAL C++ (2) I analyse concrete and steel structures using the provision of area code of respective country including (ACI,ASCE,UBC,EURO-CODE) (3) I have great potential for civil engineering group projects and assignment work at university level. (4) Using AUTOCAD i can draw,edit or renew any drawing plan or elevation.
As a lead Civil and Structural Engineer as well as Project Manager, I provide Structural Analyses and Design of various structure. Structural Steel 3D modeling, erection and fabrication shop drawings are just few of my skills included in my scope of work. Years of experience in Oil and GAs industries made me to a specialist in all kind civil and mechanical designs (API 650-620 Tank Foundation. supports for piping, Equipment found., El. Substations, Pump Stations, VALVE and Drain Pits, Culverts-Roadcrossings, Anchorblocks,... and so on. Software that i use are: Tekla v18 -3D steel modeling and detailing - active Prosteel v8i -3D steel modeling and detailing- active Bentley Staad -structural analyses- active Sap 2000 --structural analyses- passive Radimpex Tower 6 -structural analyses - active Radimpex Armcad - reinforcement drawings Design codes i use most :
Hi, I am Harunur Rashid working as a senior structural design engineer in RB builders.I am BSC in civil engineering and MSC in structural engineering.I am very good in structural and Architectural design.Very fluent in Auto CAD,Etabs,Staad pro,Sap,revit,3ds Max,Ansys,
I have Master degree in Civil engineering. I am fully prepared for work in every segment in Civil and Structural engineering. I have high knowledge acquired through work in various projects and jobs.
Project Manager and Civil Engineer with a Master in Science of Building Construction and Facility Management. My experience combines Schematic, Conceptual, and Construction Design for commercial, residential, and mix-used projects, and expertise in project cost estimation and scheduling. Experience included Building Information Modeling and Lifecycle Cost Analysis for commercial and residential buildings. Familiar with engineering and construction practices from the US, Latin America, and the UK.
Hi. I am a Msc/Civil Engineer from University of Engineering an Technology Lahore. I am working as Structural Design Engineer since 2007 and i have designd a lot of Multi storied buildings, Hospitals, School& colleges, Basic Health units, Concrete and Steel bridges and many more.
I am civil engineer with 8 years experience in design and supervision of roads, subdivision of lots, bridges, water system, telecom (FOC layout), and hydro electric power plant project. Land development design (subdivision of lots, grading, alignment, section, plan and profile. Proficient in using autocad civil 3D and autocad 2D&3D. I do quantity surveying and scheduling of the project. My goal is to contribute my skills for the success of the project.
MONTE VISTA CIVIL ENGINEERING is a civil engineering design firm primarily serving clients in Southern California, We specialize in Urban Redevelopment and Low Impact Development projects in the Residential, Commercial, and Public Works sectors. At MONTE VISTA CIVIL ENGINEERING, INC. we partner with our clients to see each project as a whole, and proactively offer solutions to our clients needs. This approach results in an open, collaborative design process that ensures quality project delivery. For more information, visit www.MonteVistaEngineering.com.
I'm a structural engineer, with ambitions for work in various types of construction projects.I specialize in design of RC and steel structures, for industrial and residential fields. I got employed in a government research facility for engineering (HBRC) in Cairo Egypt. where I learned evaluating and troubleshooting of several structural projects.I also worked for consulting groups in Cairo, contributing in structural design of ordinary industrial steel hangars, analysis and check of RC residential buildings, and other types of projects.Implementing the knowledge from research field into commercial use and troubleshooting.I'm ready to work with high quality output according to the desired standards. with expertise in design by international structural codes, in addition to skills of interpreting and coordination of adjacent drawings with the requested structural package. I have management skills to deliver jobs and tasks on dead lines.
I am a civil engineer. I graduated at Technical University of Cluj-Napoca, civil engineering in 2013. I have learned to design civil, industrial and agricultural constructions.
Hello, You have problem related to Civil Engineering. You need a experienced engineer to solve your problem. You have so many problem including Structural Design, Architectural Design, Steel Structural Design,Material takeoff, Cost estimation etc. You need a reliable Engineer. That's may be me. I have Experience in the above Civil Engineering Sector more than 4 years. I am determined to fulfill my client requirement. I have knowledge of the following software: -Etabs -Staad Pro -Auto CAD -Revit Architecture -RCC Solution -Gear -SAFE -GRASP -MS Office Program
I am structural engineer and I have experience in design and detailing of buildings and other structure. My aptitudes include structural design using automated computer programs and details of the project with Autocad programs, Allplan Nemetschek and Tekla Structures.
I am an experienced structural design engineer, with more than 9 years in engineering design and 3D computer modeling. I am co-author of more than 40 design projects of buildings including residential housing, commercial building and industrial warehouses. I have deep knowledge of Autocad, Revit and several structure analysis programs.
Freelance Civil Engineering Professional for quantity take offs, costings, project scheduling, CAD and structural design projects. I am way more productive, effective, efficient and comfortable working online than in a regular office. I believe working this way is one of my strong features since I am too boring in person. I prefer to get things done without the endless long, and I believe, useless regular meetings. If you are a client who gives clear and specific directions/instructions and can easily understand his/her virtual employee, then I would l like to work with you. I will provide excellent results as well as great working relationship with you. Time, quality, accuracy and professionalism are among my top priorities in this business. I believe I can help you in your construction projects particularly in estimating, project scheduling for civil, architectural, structural works and structural design projects
Experienced with Structural Design in compliance with British Standards. Familiar with SAP2000, STAAD Pro, MicroSTRAN for analysis and design of structures. With over five years of experience in AutoCAD, 3dsMax, Excel, VB, VBA, MSProject and over three years of experience as an industrial Civil Engineer, I'm trying to give an "Engineering Touch" to all the projects and inspire my clients, from the simplest CAD/Excel to Advanced Structural Designs.
Licensed Civil Engineer want to deliver quality services in Quantity Surveying/Estimator, Rapid Plan Drawing, AutoCAD Layouts, Land Development, Road Drawings, Sewer Line Layouts, Drainage Layout,Road & Ripraps, Retaining Walls, Site Development, Tank/Storage & Equipment Foundations, Residential Housing, MS Word, Excel, PowerPoint, Fast PDF Conversions,Math & Physics problems, Ilonggo/Hiligaynon Translation. (Philippine Professional Regulation Commission Registration Number: 0123504)
Irucka E., E.I.T. (Engineer-in-Training) holds both a Bachelor of Science (BS) in Civil Engineering with a Concentration in Environmental Engineering and a Master of Engineering (ME) in Environmental Engineering. Irucka completed his Master's program with a 4.00/4.00 grade point average (GPA). In addition to the academic training Irucka also has professional engineering experience managing the daily operations of a Class III/IV landfill (construction/demolition, farming, landscaping, and land clearing wastes) and the post-closure operations of a Class I landfill (commercial, domestic, institutional, and municipal solid wastes). Irucka also was responsible for managing the landfill's stormwater program.
I had my degree of engineering from Tunisia University . I have engineering experience in the following sectors in different capacities: - Residential Construction - Commercial Construction - Industrial Construction - Hospitality Industry - Public Works - Roads and Drainage - Structural & Architectural Drawing - Structural Analysis of Residential and Commercial Building - Quantity survey. - Geotecnical aspects like consolidation, slope stability, soil test, foundation design works. - Steel Structure Detailing *** CAD drawings, detailing and everything has to do with CAD
Senior Structural Engineer (P.Eng. licenses from AB & BC in Canada) M.Sc. degree in Civil Eng. from SDSU, SD State, USA Over 20 years of exposure to Civil & Structural Engineering (obtained from working in 3 countries) Field and Office Engineering experiences Commercial & Heavy-Industrial Engineering Experiences
Civil engineer experienced in civil site development using Autocad Land Desktop.
I'm a Structural Engineer so civil engineering is my first priority. I have professional working experience in structural engineering field. I also do graphic designs, It's my hobby.
Always ready to accept new challenges and learn new things, anytime available for multiple tasks, open mind, fast and efficient. Ph. D, assistant professor, skilled structural engineer, with wide experience in structural and design analysis, FEM modeling, experimental earthquake shaking table tests, safety earthquake design, civil engineering consultancy. Wide experience in structural design of steel structures, reinforced concrete structures, masonry structures, wood structures, composite materials structures. Research activities, educational student competitions coordinating, structural engineering professional consultancy. Beside structural engineering skills I am also enthusiast in editing videos and photos, creating posters in photoshop or product presentations. ÂTrue happiness comes from the joy of deeds well done, the zest of creating things new.Â - Antoine de Saint - Exupery, this is the motto that guides me.
Civil Engineer, Solar Systems Designer, Renewable Energy Advocate, Natural Building Enthusiast
looking for quality work output at a fair price,strict directions and deadlines contact me. I have an excellent reputation on all kinds of civil engineering projects.Highly talented and a hard worker.
I finished my professional studies in Civil Engineering from Rajshahi University of Engineering and Technology , Banladesh(the top ranked engineering university of Bangladesh). I am registered professional structural design Engineer under the Institute of Engineers Bangladesh(IEB), Membership No. # MIEB-32467. I have been working as a Structural Engineer in a reputed Consulting firm for 6.5 years.
HI! I am a qualified civil engineer. I have finished faculty of civil engineering of Tirana, ALBANIA. I have worked in several project . My role position was in designing and drawing. I work with software Etabs, Tekla, Autocad . In european and american designing code
I am a Civil/Structural Engineer with solid experience in design, estimating, construction and project management. I have done both office and field work simultaneously for more than seven years. I hold professional license as a Civil Engineer and a Master Plumber, and I am also accredited as a Materials Engineer by our public works and highways body.
Seeking for job on line. I have the following: Civil Engineer,Management, Primavera Planner, Construction, Design, Supervising, Contracts / Procurement, Cost, Planning, Draftsman, Quantities Surveying and Quality Control. Good experience in Primavera Planner, MS-Project Planner, Google Sketch, 3D Models, 3D AutoCAD, websites manager, ads and website design.
I am a qualified Civil Engineer from Bangladesh. I am seasoned in quantity takeoffs, materials estimation and earthwork/site-works. I do provide any kind of structural analysis and design also. Moreover I am specialized in Structural and Geo-technical Engineering analysis, design and estimation.
Magnus Engineering's success is based on the multi-disciplinary skills and experience of a talented team, deeply involved in offering valuable solutions on each project assigned. We can fulfil any engineering task, from conceptual design, FEM analysis, digital modelling and design for manufacturing.
13 years experience in developing Civil construction plans for commercial and residential projects. Devoted to creating plans that are precise, clear, and provide value with a common sense approach. Background in construction and now full time in developing workable construction plans.
Region Design is a client-driven civil engineering consulting firm located in Orem, Utah. We specialize in providing the highest quality engineering design, planning, landscape and construction document preparation services for residential, commercial and municipal projects of all sizes.
Experience working in mega projects such as the construction of an international airport in Libya (5 million passengers per year). Luxurious palace hotel in Riyadh, KSA and subway metro stations in Alger. Design and implementation of structural frame elements according to British standard , BAEL and Euro code specifications. In-depth experience supervising of draftsmen re: corrections of plans, drawings and coordination with MEP. Good interpersonal skills for interfacing with all levels of management I would like to put this expertise to work in a civil and structural engineering projects . If you are currently searching for someone with my credentials, I would be pleased to meet with you to discuss how my technical knowledge and leadership skills might contribute in helping your organization achieve its strategic objectives
A dedicated, full pledged civil engineer capable of doing professional works in a less time and a more sophisticated and excellent work. I developed adept skills in Civil engineering such as AutoCAD both in 2D and 3D, Sketchup, Structural analysis using FEA and MS Excel. From my previous job, I gain enough knowledge in Project management, Human relations and the proper and legal procurement processes. I have also engaged creating Cost estimates, program of works and made business letters. Aside from engineering, I have an inclination in computer programming and letter writing. I also posses excellent English communication skills, both in oral and written Time is one of the keys to success thus time management is also a necessary skill. As a civil engineer, I have developed higher capacity in time management which makes me a perfect target for excellent employer.
I am a civil engineer with 7 years of experience in licensing of private construction projects and their construction, the preparation of structural designs based on earthquake safety regulations, as well as overseeing its implementation.
Profession in civil engineering. Design and analysis of steel and reinforced concrete structures.
My specialist skills are in Civil Engineering Field like, Cost Estimation of Building , Bar bending Schedule, Project Planing, Construction Schedule, Auto Cad, working in these field since 7 Years, and i have Qualification in Civil Engineering
My experience of working on a complete 3-D modeling (Architecture,Structure and interior design) of a high rise building with addition to my expertise in civil engineering means that you will get your job done correctly and on time. My work on modelling of several Buildings with the use of different tools as per customer demand in addition to quantity estimation and Time scheduling means that i am ready for any kind of modelling demands. My goal is to make sure youÃÂre satisfied with your project and itÃÂs delivered on time and within your budget. To see samples of my work please look in my portfolio now.
I have experience of Construction, Estimation and Costing, Survey and Levelling for Multistory Buildings, Road as well as Railway Over Bridge Project. Also Have Good Hand in Computer softwares like Autocad, Revit and Staad pro. And Learning Prima-Vera for Project Management.
Professional Civil/Site and Environmental Engineering Services provided to clients on a budget. Project Delivery is tailored to the clients needs and budget. Projects can range from conceptual phase and be taken all the way to construction ready plans (depending on the location of the client, some field work is usually required). Focusing primarily on the southeastern U.S. Professionally Licensed Civil Engineers.
I am a civil engineer having a long and varied experience in the construction industry: from being a Resident Site Engineer; Senior Design Engineer; and currently a Partner in a Civil and Structural Consulting Firm in Malaysia.
I have extensive knowledge of Computer Aided Design (CAD) drafting and detail design with an Advance Diploma of Civil Engineering and Structural Design in additional to a Civil Engineering Degree. With 6 years industry experience I have the knowledge and experience to produce the best possible outcome for your particular project. Having been in industry for a number of year has given me the opportunity of familiarise myself with a number of industry standards and specifications used daily for general consulting and design in the field of Engineering. I will provide professional input and communication ensuring that a positive outcome is achieved at all times. Guarantee of Quick turnover, minimal delays and contactable 24/7.
Welcome to Civil & Structural Engineering Design Services. A multi-disciplined practice that provides a complete service for our clients and a coordinated and speedier delivery of services. We are dedicated to providing a professional and innovative service for our clients covering a wide variety of projects.
Masters Degree Education in Civil Engineering. 100% accuracy guaranteed and a quick turnaround -Autocad (any release) : Sketchup : -Residential/Commercial drawings (architectural, structural, mechanical, electrical, plumbing) -Static and Dynamic Structural Analysis (concrete, steel, timber design) -Energy Efficiency Analysis -Mechanical Engineering and Design -Graphic Design (posters, brochures, logos, etc) -Pdf to Autocad conversion -Space Planning -3D Modeling -Page and Book Layouts -Photo Editing -Analysis
Civil engineer specialized for water supply, wastewater drainage and WWTP design with +15 year experience in this field.
Civil Engineer, design structure, AutoCad 2007, Structural Analysis, Sap2000, Etabs, etc.
civil Engineering more than 35 years experience Architect Designer with a strong engineering background. Great deal of experience in Building design, industrial design Skills: Architecture Home Design, Building Construction, CAD Drafting/Design, Civil Engineering
I am a civil engineer by profession. I have architectural, civil and structural backgrounds. I have over 18 years solid background in design, drawing, detailing, layout, planning, estimating, construction, geodetic/topographic surveying. I am expert in Autocad 2D and 3D (10 years experience), Google Sketchup, 3D modelling and Vray rendering, video walktrough and visualization (see video), STAADPro, Photoshop.
We are a self-motivated Structural Engineering company having more than six years of experience in the design and estimation Industrial Buildings, Pre Engineering Buildings, Residential Buildings, Hangers, Pipe racks and Foundations etc. We have a team of experienced engineers, CAD and Tekla operators to perform any task efficiently and with success.
I'm an Engineer from Bangladesh, having 13 years working experience in Design,planning, Drawing Architectural, working drawing & project Management . I am seeking employment where I can express the knowledge acquired in a practical way. I got the opportunity to work in some project in Bangladesh, I am very interested in working with you. With my education and work experience I meet requirements for performing any work that is assigned to me.I would be very pleased to have the chance to show my skills in your company.
Providing Civil and other Engineering services: Geotechnical, Structural, Hydraulic Design, data analysis
I am a Civil Engineer in the Philippines who would like to have additional income by getting part time job here. I hope I could be in service with you.
We are the team of Engineers, Having over than 10 Years of Experiences in Handling Engineering Works including Structural, Civil, Architectural, Mechanical and Electrical, and Piping. Further detail about us, Please directly go to our website : ahpengineers(dot)com.
Offering over 11 years of versatile experience in construction project management as a Lead Structural Design Engineer, Structural & Architectural Design Engineer, Technical Office Engineer, Project Engineer and Project Manager. With a track record of ensuring projects are delivered to the highest quality, within budget by effectively organising, managing and utilising all resources. Highly skilled in all aspects of civil engineering, multiple construction project management from conception to completion. Possess strong technical expertise with full range of engineering and project management software knowledge. Demonstrated skills in organising workflow from group planning sessions through implementation in different projects and capitalising on primary competencies of managerial skills.
A license Engineering specializing in the field of Civil Engineering specifically in the line of Construction, Mapping, Takeoff, Simulation and specific concerns about Engineering. With my past experiences, I have developed great analytical, technical, programming, problem solving skills which are inclined with my specialty. I'm a very approachable individual and working with you would certainly be a pleasure.
Professional engineer with demonstrated success in the design and construction of residential, commercial, industrial, and government buildings. Experienced in the design and analysis of new and existing steel, concrete, masonry, wood, and cold-formed steel structures. Skilled with discipline coordination and developing contract documents, including drawings, specifications, and cost estimates. Comprehensive knowledge of design standards and codes. Proficient in the use of drafting, modeling, BIM, and analysis software. .
I am a professional civil engineer , graduated from Birmingham University , UK , majoring in structures. I have worked for over 25 years on many major project in the Middle East and Pakistan including roads , pipelines , land development for housing projects and high rise buildings. A truly multi lingual and multi-cultured professional , I can communicate easily in English, Arabic and Urdu and due to my extensive experience , I can undertake technical writing assignments in English and Arabic.
If you want your job to get done without frustration, in high quality then i am your man. Civil/ Structural Engineer Consultant BEng - MSc - MIStructE - MICE Wide range of experience in the construction industry, having involved in civil engineering projects within the construction, architectural and designing industries from planning, setting out through to overseeing site works. Website: http://zafeiropoulosnikos.wix.com/nickzaf
An Aid Engineering is a innovative company providing engineering, drafting and information technology enables (ITES) services to the architect, structural engineering and construction companies through the world. Located in the suburb of Baroda India, An Aid offers extremely cost-effective services and more importantly takes advantage of the time difference between India and its clients location to offer shorter project turn around time. We believe that the cost-effectiveness and quick turn around time offered by An Aid will significantly enhance the competitiveness of our clients.
I am a US-based civil engineer experienced in site development, hydrology/hydraulic engineering, stormwater quality, traffic, utility relocation, plan production, and project management. I'm also available for technical writing and data presentation.
I'm Civil Engineer Expert in Draw and design concrete structure using Autocad Drawing program & Sap2000 Design program. Expert Ms office like word,excel,power point .
I am a civil/environmental water resources engineer licensed in Georgia,New York, North Carolina and Pennsylvania. I am currently employed in the capacity of the Director of Water for a Mineola, NY based full service AE&T firm. I was recently featured in the Long Island Business News: http://www.pageturnpro.com/Long-Island-Business-News/50184-Whos-Who-41913/index.html#4
I'm a civil engineer, with ambitions for work in various types of construction projects. I specialize in design of RC and steel structures, for industrial and residential fields. I'm ready to work with high quality output according to the desired standards. with expertise in design by international structural codes, in addition to skills of interpreting and coordination of adjacent drawings with the requested structural package. I have management skills to deliver jobs and tasks on dead lines. The deadlines are strictly held and I always offer punctuality and precision at very competitive and negotiable prices. I'm flexible in working hours and if an urgent job comes in I won't stop working after 8 hours if the client needs the plans soon. Accurate work is the standard of course. It's the least what you can expect from an engineer. If I'm being picked I always try to finish my part as soon as I can to satisfy the client and to be able to acce
I'm a civil engineer with a specialization in geotechnical engineering currently undertaking doctoral studies in canada. I have experience with soil testing, soil classification and characterization, foundation design, ground improvement assessment and characterization of contaminated sites.
I have a Masters degree in Civil Engineering, with an emphasis in Water Resources. I am well versed in engineering design and construction of waterways, commercial/residential building, geotech (soils), and heavy civil. I provide fast turn around, as well as a detailed reports. I look forward to a great working relationship.
Civil engineer with quality educational background, currently pursuing a Masters degree in Structural Engineering. Serious and dedicated, 100% focused on accuracy and quality!
Civil engineer in wastewater and drinkwater treatment plants, pipelines, water supply networks. Also I have professional skills in 3d modelling and rendering. I am hardworking and a fast learner with good skills and knowledge.
Professional Engineer with 6 years of experience in environmental compliance, civil and environmental permitting, site development and wastewater management.
Civil engineer with 11 years of progressive engineering expirience with estimates for all kind of architectural,structural and MEP works, cost analysis and " turn key " construction of interior and exterior projects. Main activities are: -Estimate quantities and cost of construction works to determine project feasibility -Integrate engineering element into unified design -Preparation of architectural and construction scale drawings -Preparation of interior drawing details -Produce a BoQ for the tendering process -Preparation tendering and contract documents for building bidders and contractors -Administer construction contracts -Directed activities of workers engaged in preparing drawings and specification documents -Oversee the execution of the construction works, site supervision, quantity surveying, track and control construction costs against the multiple projects to avoid cost overruns -Provide the projects endings and closings procedures according to contract documents
Structural Civil Engineer
I'm a civil engineer with experience in CAD (specifically Autodesk Civil 3D & Land Desktop), GIS, GPS surface modeling for machice control, and construction layout. I'm capable of designing subdivisions, commercial sites, and utility infrastructure.
Have a civil engineering background and currently working on environmental engineering masters degree in the United States. I have a wide experience in various engineering filed including structural design, water and wastewater collection systems, PS's, road design, cost estimate, quantity surveying, construction supervision, proposal writing and reporting.
Viking Engineering Services, LLC (VES) draws on over 20 years of experience in the land development industry to provide customized engineering and site consulting solutions for residential, commercial, institutional, and municipal projects. VES is professionally licensed and insured, with portable credentials accepted within the continental U.S., and internationally. VES is based in Boston, Massachusetts, and our partnership with SERVCORP allows us access to office space around the globe.
I have 24 years of experience in the field of Civil Engineering/Construction Supervision. I can offer all type of telecommuting activities related to Civil Engineering/Construction Supervision in professional manners.
I am a graduated structural engineer from Sri Lanka and I am willing to work as a structural and civil engineer in building designing, modeling and analyzing. Also I have thorough experience and practice in ETABS,SAP2000 and SAFE computer modeling. also hands on Master series and other structural engineering related software such as STAADpro, Autodesk Robort etc.
We are the consultants of civil engineering and solve the problems accordingly We provide the design of steel structural and R.C.C. structural and detail drawings of those structures on Auto CAD latest versions.We provide the services of designing and detail designing of Industrial, residential, commercial and special in oil and gas industries. Attached sample files are recently structure of petroleum company named BYCO petroleum in Pakistan for erection shop fabrication details drawings . With highly skilled staff members available, representing a range of expertise, we can provide exceptional service no matter the complexity or size of your project. We provide the design and details of steel structural and reinforced structural of residential, industrial buildings, workshop details of steel structural and re-bars on Auto Cad and Tekla structure's latest version. Our engineers and Drafts person are experience having experience of more than 15 years in hand.
I am a structural engineer with 10 years of experience
Professional Engineer in Structural analysis and design sector. Practicing in design of structures like Buildings, Towers, Poles, Retaining Walls, Foundation (deep & shallow) etc. Use software in practice like ETABS, SAP2000, SAFE, MS Tower, PLS-Tower, PLS-Pole, PLS-CADD, Prokon, AutoCAD, 3D Max. We have eight engineers and six drafts man. All are expert in their works.
From my previous work here in the Philippines, I have learned various skills and experience as a civil engineer. I am very familiar in providing structural drawings in autocad in U.S. standard and calculations that comply to the current international code such as IBC 2009.
I have experience in Project Management, estimating, planning, organization, tendering, reporting, especially in construction field. I have excellent computer skills - working with MS Excel, MS Word, MS Outlook, AutoCAD, applications for photos editing, simple websites with WordPress. I'll always be honest and responsible to my Clients. If something not clear to me - I will ask. If something bothers me - I will share and I will suggest solution. If something I can't do - I don't promise it. I will not lie. If I promise something - it will be completed on time and with required quality. The objective is one - another one successful project.
RENCAD - high quality house plans and home design RENCAD provides solutions to customers who wish professionals quality house plans, home design and 3D screenings of their building projects. We work with architects, engineers and designers from around the world who are customer oriented and are intended to implement their visions in 3D pictures. At very competitive prices, RENCAD will help you better planning and design your house plans by offering you high quality home design renderings at a low cost. See exactly what are you payng for before the first brick is laid. Tell us your home design thoughts, furnishings options, colors and materials and we will give you realistic pictures of your final design.
I have great knowledge in 2D Design as I have been working as a 2D Design Designer for the past 5 years. I will prove to be beneficial for your projects in the areas of 2D and 3D Modelling and 3D Rendering. I have expert AutoCAD skills. I have also worked in Autodesk Revit software, Advance Concrete (CAD-integrated structural design software). I am available for your service at any time and will complete the given task on time. I am ready to be hired by you.
15 Years - Civil Engineering design - AAS Civil Engineering Technology. (1998) 15 Years - Civil Engineering drafting 15 Years - Survey drafting 10 Years - Structural Engineering design 15 Years - Structural Engineering drafting 10 Years - Mechanical, P&ID drafting 10 Years - Architectural drafting Civil & Structural Design in the following areas: Residential: Subdivisions, Master Planned Communities, Apartment complexes, Duplex and Town Home Communities, Type IV wood structures. Commercial: Sites, Pads, Office complexes, Box stores, Gas stations, Concrete Structures, CMU Structures, Steel Structures. Industrial: Sites, Rail yards, Concrete plants. Public Works: Transportation, Sewer Systems, Water and Storm Systems, Schools, City Halls, Ski Resorts.
STRUCTURAL ENGINEER for technical drawing, modelling or structural analysis My main goal is to help with my AutoCAD and ArchiCAD which softwares I use in a daily basis since 2009. I'm also here to use my knowledge in steel, timber and reinforced concrete structural design for projects which require such skills. I uploaded some of my design plans in my profile what I made in the past. What you can see there is mostly in Hungarian but the titles explain the plans. I also worked using imperial using so any clients from Canad or the USA can hire me without concern. I'm flexible in working hours and if an urgent job comes in I won't stop working after 8 hours if the client needs the plans soon. As I've lived in Hungary and the UK I have experience mainly in EUROCODE design. I currently live in London/UK so if you're living here it can be even easier to contact me.
Licensed engineer with 12 years professional experience specializing in civil/site design for commercial, residential, and institutional land development projects. Proficient in all aspects of site design and construction document preparation, including site planning, roadway horizontal/vertical alignments, grading, stormwater management, water/wastewater systems, and erosion and sedimentation control. An expert in use of AutoCAD, AutoCAD Civil 3D, Microsoft Outlook, Excel, Word, Powerpoint, CorelDraw, Hydraflow Storm Sewers, and Hydraflow Hydrographs.
We are Self motivated Civil/Structural Engineers, Designers and Tekla structure detailer. We have working experience in reputable companies.We are experienced in Design of Equipment Support structure, Steel pipe rack. Pipe Stanchion, residential building, Pits, Foundations, substation, Manhole, Lift Station,Sewage along with engineering drawings etc.
Hi. I am interested for any jobs in area of civil engineering. I have degree Bachelor with honours in civil engineering and good experience with work in AutoCad in this area. I was a part-time worker for company which is working on projects from Europe.
As a Project Manager in the heavy highway industry, I have managed projects ranging in size from $300,000 up to $35 million, with up to 10 projects running concurrently. I received a B.S. in Civil Engineering from Drexel University, 2009. with a concentration in Project Management. View my LinkedIn profile for additional information: http://www.linkedin.com/pub/stephen-carullo/50/401/586
Quick learner motivated & dedicated to get the job done right.Can cope well with simultaneous tasks.
Licensed Engineer with experience in domestic and international engineering practice, project implementation and visits on site. Proven work ethic and ability to produce exceptional results with minimal supervision. Advanced oral and written in Italian skills, good knowledge of French and basic in Dutch. Proficiency in engineering software and computers use in general. My professional development is based on a desire to undertake on challenges and a willingness to learn new skills and reach new goals. Open minded and willing to start a new challenge also in a different career path, I have a really good knowledge of the world and I have experienced a lot in life.
I am a Civil Engineer, who has a strong knowledge in building projects from planning, design & analysis to implementation. I can managed different projects,(e.x. ive managed the Concreting works of 2 Mat footings with 3,000 & 7,500 cu.m. volume) I can and been engaged in planning and analysis using PERT, including Cost analysis. Communication has been applied and continually experienced by me in my work.(Its been an essential ingredient in every step of creating a project. CAD software has been of great help for me in my work. I have been able to play and have fun with it.
I'm civil engineer from GazaStrip, I worked many structrual drawings, and I,m ready to work with you in my Specialist.
Broad experience in design & drafting steel and concrete structures for industrial, energy, oil & gas. Familiar with US Code: ACI-318, ANSI/AISC-360-05, ASCE 7, API 650. Software: STAAD-Pro, AutoCAD, Microsoft Office Excel.
I am a Civil Engineer by profession since 2008. During my first three years I was a Technical Assistant to the Director of Construction Operations. Back then, my job focuses on paper works, data encoding and correspondences. I am familiar with MS Word, MS Excel, and PDF conversion. Currently, I a working as a Design Engineer in a Geotechnical Engineering company. During my free time, mostly after office hours, I do extra jobs like Admin Support, Translation, Data Entry, Transcription, AutoCad drawings, etc. My preference for communication is through email/messages.
I have 8 years of experience in the civil engineering field.I believe i can deliver the professionally detailed drawings as per clients' requirements.
Specializes in Design of Residential, Commercial and Industrial Buildings. Expertise in CADD Software i.e. ArchiCAD, AutoCAD, MathCAD, SketchUp, Staad.Pro, Autodesk Robot, SAP2000,MS Office, RISA-3D. In-Depth Knowlege of Codes & Standards i.e. ASTM, ACI, ASCE, AISC, EC, IBC Can provide Services for Building Design, Structural Modifications, Estimation/Quantity Take-Off, Project Scheduling, Tender and Construction Documentation.
I'm a civil engineer trying to make the world a better place. Specialties: Civil Engineering - Land Development, Transportation, Infrastructure, Public Works, Civil Design
Professional Engineer (PE) with over seven years of experience in CAD, civil engineering, management and consulting.
I am Civil Engineer having Masters degree. Have good experience in Structural Steel design and detailing in particular. I have more than 10 years of experience of working on projects related to Oil & Gas, Telecom Sector, and Process Industry. I have knowledge of American & British standards and software related to my area of expertise. I am highly motivated and hardworking individual in pursuit of achieving excellence in my career.