Im graduated as electrical engineering technology and now pursuing electrical engineering . It's a challenge to study engineering but with God I can do all things and make things possible. I will my best to do my job.
I am an electrical designer primarily working with lighting design and lighting control. I have a diverse experience in these areas, as I have worked on commercial, residential, medical and educational facilities. These are all successfully finished projects that make me a skilled professional in the field of lighting design and control.
I am working as an Electrical Engineer in Suray Industies Private Limited since November 2011... My duties is to Plan and Supervise generating equipment, construction plans, operating & maintenance staff...
I have over 20 years of experience in design, implementation and maintenance of electrical installations and lighting. In the past 5 years I have completed numerous projects regarding street, household and industrial buildings lighting in Macedonia, as well as designing solar panel installations for households and industrial buildings.
I am an Electrical Engineer I have worked with Electrical System distribution design, protection I have worked with transmission lines too and Substations I am a programmer too. I have made programs for different industrial, electrical, purposes with good comments I work with AutoCAD 2D and 3D included its language (lisp) to produce a set of programs to optimize the project
I am a retired Electrical Engineer with 40 years of experience in HT & LT Install ions. I am well versed in Electrical Design, and drawing up Project Estimates, Material list, Project Drawings and recruitment. I have worked in the Middle east and India. I would like to work basically from home with site visits as and when required. I am 65 years of age but physically fit and in very good health. I am also well versed in Auto-cad. If any one wants to use my skills it will be at a fixed rate. Projects completed:- Housing projects, Sub Stations, Upgrading electrical Installations in the Oil Industry, Instrumentation and HT Electrical Installations. I am well versed in Design, Installation, Testing and Commissioning of HT and LT Electrical Installations.
A qualified and experienced electrical engineer with 12+ years of exceptional track record in design as well as installation of heavy-duty electrical networks and equipments. Seeking a senior engineer post with a well reputed engineering/construction organization to contribute to financial tangibles in terms of engineering expertise.
Capabable at mechanical and electrical engineering. Very hands on and have excellent fabrication and troubleshooting skills. Very innovative and especially good at finding practical solutions to complicated problems.
I graduated from The University of Iowa with an Electrical Engineering degree in May 2012. Upon graduating I had a job waiting for me at PowerFilm Inc. and I still work full time for them in product development. While I was a student I was the lead electrical engineer on a NASA funded project for two years. My task was to design the front end electronics to a data acquisition system and build a working engineering model. Funding was cut before I could build a flight model. This gave me experience working with DC/DC converters, small signal amplification, noise reduction, grounding, data formatting/transmission and procurement of rad-hard/MIL-STD parts. At my current job I primarily work with low power DC/DC converters and battery management. Most of the systems I've designed at PowerFilm rely on a combination of AC and Solar power as inputs with outputs that vary on an case by case basis. I've also gained experience testing solar modules and characterizing their performance.
Have experience in various production,quality control and design field in various engineering sectors. Well versed in industrial automation, programming. Basically an electrical engineer. Now working in system house of SIEMENS.
Hi! My name is Jason and I'm an innovative electrical engineer looking to apply my expertise. I've established an business dedicated to helping clients achieve success with their electronics, software, and mechanical development. My promise to you is that not only will you get high quality engineering services in a timely manner, but will have the enthusiasm and dedication of an engineer that really enjoys electronics. Most of my industry background lies within the medical industry, but I've also worked with aerospace and audio applications. I love prototyping and making ideas come to life, but also enjoy supporting those ideas from start to finish. I've helped a number of clients so far and I'm looking to further increase my portfolio! When I'm not working I enjoy hiking, woodworking, scuba diving, surfing, and traveling. More info about me can be found on my website: www.metznerprototyping.com
I have done Electrical and Electronics Engineering . I have 5 years of experience in this field .
Background:Talented Electrical Engineer and Designer of 17 years (Will Provide LinkedIn Name upon asking). Provider for smart and innovative technology solutions for single board computers, industrial, automotive, and aircraft. Clients range from hobbyists, start ups, and corporate giants. Mission: To service the customer with the highest quality and reliable products that meets the customers cost and planned schedule. The customer must signoff all decisions and changes. Motto: A project with input that is defined and detailed will produce a perfect product.
I am a full time freelance professional mechanical design engineer with more than two years of intensive design and draughting experience within the consulting,consumer products and industrial machinery sector, that is proficient in initiating and developing mechanical conceptual design. I am skilled in Computer Aided Design/Draughting,Finite Element Analysis, Phototorealistic rendering. i am technically skilled in the following software: Pro/Engineer wildfire 3.0 , Creo Parametric 1.0,Ansys 12.0,Bunkspeed I'm happy to work alone or as part of a team to find the perfect solution to your project. I listen to your needs and then solve them. We can work together from concept development to final design or any other custom requests. for more information on my portfolio kindly visit my website www.mezatio.com
Fluent in Mechanical designs, CAD(Solidworks, Autocad, Inventor, CATIA, Abuqus and etc) and any Manufacturing Designs and calculations. I am a Mechanical Engineering having over 4 year experiences. Many projects have been done by myself from 4 years related to mechanical engineering side. Design can be done according to the expectation considering its properties such as strength and ergonomics. As well as Design calculations also can be done according to the project. Documentation works with related softwares, technical advising, consulting, teaching are the other skills i can do.
At Dovetail we wish to become your trusted advisor and business partner. We endeavor to discover your most challenging needs and share our expertise to offer economical and efficient solutions. We would love to learn more about your toughest problems and solve them together. Whether we can help, or know of someone who can, we invite you to share your challenges with us.
Looking to leverage over 10 years of leadership experience with technical, development, and engineering organizations, within both large corporate and small startup companies, to help form and execute on a strategic vision of growth through technology. We've helped new organizations take ideas through to tangible deliverables that give them a strong present in the market, as well as worked with large organizations to become agile and more responsive in a marketplace that is becoming more and more competitive. We're focused on product development from concept to delivery, and work on all the auxiliary aspects of the business as well, including marketing, sales, manufacturing, support, and all relevant operations. Tell us what you need and we'll be honest and let you know what we can do to help.
ESG was established in 1984 to provide professional electronic engineering and microprocessor programming services to the USA east coast high tech community. ESG's substantial lab facilities are also a resource for start-up companies that do not yet have a fully staffed or equipped electronics development lab. We offer General Electronic Consulting based on 30 years of Consulting Experience and 40 years of Professional Design Engineering Practice. At ESG, circuit board design and digital electronic engineering go hand in hand. Whether serving as a Microprocessor Design Consultant or an Altium PCB layout designer, the objective of making the client both profitable and independent of the need of continued consulting assistance are our constant goal. Should you chose another service provider, be sure to specify ESG as the Documentation Reviewer and Arbitrator for acceptance of documentation and deliverables. ESG sets the standards for Schematic Design and Electronic Engineerin
I have a BS and MS in Electrical Engineering and have worked in many industries including robotics, semiconductior/MEMS/microelectronics, and aerospace. I am a self proclaimed geek (although my friends would agree). I have experience in everything from sensor and actuator design, AD converters, to automated testing/control systems. I have a very broad technical knowledge that I bring to every project I work.
Earley Engineering and Associates is a complete engineering and design outsource service with over 120 years of experience in the area of machine tools, material handling, composites, fixtures, hydraulics, and custom designed special machines. We can support our clients through the entire project from concept, through development, and finally to finished product. We can also provide turnkey solutions (complete designed and manufactured) to our customers with our network of manufacturing alliances.
Electrical engineer experience in field of designing of electrical installations in buildings. Design of interior and exterior lighting.
Excellent in Oral and Writing Communication Ability to Work under Pressure Very Investigative and pay attention to details Good Organizational and Interpersonal Skills Integrity and Honesty Willingness to Work in any parts of the World
I have 5 years experience in design engineering, MEP. My work profile included Lighting & power calculations, preparing accurate material take-offs and reports, Preparation of BOQ, technical specifications and tender documents for the project. Lux level calculations of interior and exterior lightings. I also have a good Knowledge of NEC, CEC, NFPA for US & Canada based projects
Welcome to BKM Engineering, specializing in PCB Design, Schematic Capture, and Home Automation. Let me introduce myself. My name is Brian K Mcclung, and I am an Electronic Designer. As a well experienced Electronic Technician I have started BKM Engineering, primarily involved in Engineering design and support services, online instruction in Engineering and Electronics, Home Automation development, along with other design, technical and support services. Seeking a wide range of technical projects and opportunities. Please visit my oDesk profile at the following link to get a more accurate profile score: https://www.odesk.com/o/profiles/users/_~016c20d1e6f6ebe786/ I encourage all of my potential clients to review my payment terms before responding to my proposal. Although I cannot guarantee 100% success in all of my projects, I strive very hard for complete satisfaction, and my payment and communication terms are a key part of this proces
I am a Technical Project Manager with 5+ years experience in managing complex deliverables through a project life-cycle with 5+ years effectively managing people and their workload. As a consultant I possess skills in strategic planning, problem resolution with outstanding communication talents. With a proven ability to build and lead highly efficient teams; I have to trained technical personnel while conveying complex concepts in understandable terms. I offer a unique combination of creativity, analytical and process oriented skills. With the ability to comprehend the voice of the customer, I make data based decisions to create cost-effective solutions for internal and external clients. With clients in todays society, companies need someone who can do more than the standard scope of work. With my extensive experience in technology and management it allows me to adapt very quickly to meet their needs.
My name is Awais tariq.I am from Islamabad. About my educational qualification: I did my BS in Electrical Engineer from NUCES-FAST Islamabad and HSSC and SSC for FBISE. My greatest strength is Ability to use my own initiative to take on challenges. I am always proactive at what I do and that keeps my mind simulated and focused. My hobbies are cricket and tourism Love to Interact.I have more than 5 months experience working with AGECO pvt as a design engineer. That's all about me
Electrical Engineer: design of circuits, PCB's, FPGA systems, and firmware.
AMSTOR - Engineering Design & Consultancy (EDC) is a Global Engineering Consultancy firm specialised in Infrastructure ,Energy, Mineral Processing, Material Handling, Piping and 3D modeling among a host of other design and engineering activities. AMSTOR-EDC provides profit oriented cost effective engineering solutions to our client's technological requirements. AMSTOR-EDC, with its team of experienced Engineers and Auto CAD & Microstation Designers, who are totally committed to quality and Work excellence in diverse disciplines such as, Mechanical, Piping, Electrical, Instrumentation, Civil & Structural has the in-house capacity to develop & readily meet the varied requirements of all the projects handled, right from the design stage to commissioning. At AMSTOR-EDC, our primary goal is to identify and realize the client needs and provide the most efficient, cost-effective solution to accomplish their objectives.
Know-how - more than 40 years of experience in Machine Tool Industry. Mechanical Engineering, Mechanical Design, CATIA, SolidWorks, Creo Elemenst/Pro-E, Autodesk Inventor, AutoCAD, Solid Edge. We are a strong, professional and very flexible family-based team, a team of highly experienced freelance mechanical engineers. We are the perfect partnership for competent, flexible and reliable services concerning: - Mechanical Engineering - Mechanical Design - 2D and 3D Modeling - Assembly Design - Surface Design - Sheet Metal Design - Research & Development Starting with the most simple projects up to the most complex ones, we can offer you the best solutions, efficiency and value at the lowest possible costs. Everything is made to suit your projects requirements. With our experience, competence and discretion, we create confidence and a lasting benefit for our customers. For details, please see - Portfolio.
MechSolvers TechNologies is a orgainisation dedicated to provide high quality engineering design services to its clients or partners. We have a skilled set of members with multidimensional capablities. Companies we have worked with already- 1. CMW Inc. USA 2. Whitepython UK 3. MK Automation Australia 4. Dynamic LLc USA 5. Eco Alluminium Pallets USA 6. Premsco Inc USA 7. TaskForce R&D Canada etc. Also we can manufacture sheet metal products, injection molded plastic products, Mold/Die making at a very low cost. We have collaboration with one of the highest quality and sophisticated workshop with water jet cutting machines, EDM, Forging setup to serve our overseas clients. We envision a productive world based on mutual Goodness. We serve because We love to serve. Looking forward to productive partnerships all over the world based on mutual goodness and benefit for all. Looking forward to great collaborations through out the world.
Listan Engineering Ltd is a company that can design, build, install, test and commission all types of automated machinery for industrial customers who want a specialised service with quality and cost at the heart of there business.
Versatile Interdisciplinary Nanotech Engineer -Nano- and Micro-optics -High Reliability Production Supervision -Optical and NVIS Metrology and Test -Nano- and Micro-fabrication -Plasmonic Devices and Electromagnetic Metamaterials -Team Leadership -Electrical Design Engineering -Nanobattery Modeling and Simulation -Data Acquisition System Design -LabVIEW-based Software Design -MATLAB Data Processing and Analysis
We Feynman Technology Services (FTS) an ISO-9001-2008 as a company founded in 2006 are providing services for basic engineering, detail engineering and design on the basis of process engineering and technology provided for any EPC mode of working, Balance of Plant Engineering and Infrastructure Engineering. We have worked on steel plants, coal handling, cement plants, processing plants, beneficiation plants, power sector, pelletizing & sintering plants, iron making plants, metro projects, equipment designs, machinery design, cross country conveyors, various technological structures like vessels-tanks-bins-silos-hopper-chimneys, building infrastructure projects and many others. We are a total engineering company and would like to request you also to visit our website www.ftsengineers.com for more details.
To get into a long term relationship with an organization Two year of experience in Electrical Industry with good analysis and design capability, good communication and interpersonal skills, proven individually in project management and worked with team of professionals. Vast knowledge in ELECTRICAL and FIRE FIGHTING
Do you need someone to engineer a design for your interesting project? Do you need an outstanding technical writer that won awards writing plans for the military? Do you need an amazing project manager that can get your project completed on time, on budget, and exceeding expectations? Then you should consider hiring a former submarine driver for your project. During my career, I have designed or operated nearly every type of engineering system. You will not find a technical writer that is better than me at explaining the difficult. I am not cheap -- if you are looking for a "bargain," then you should probably look elsewhere.
I focus on product and mechanical design. I specialize in the bicycling industry, and the Wind industry, and have been involved in developing a wide variety of invention ideas into functioning products. I have a Masters of Science in Mechanical Engineering with a focus in design.
Assist in the development of innovative, consumer-centric products, utilizing a holistic approach to design - considering all aspects product definition (manufacturing, assembly, final use, material selection, etc) to work towards the most optimum design and translating them into tangible products.
Have well experienced in electrical projects like power plant construction in which erection ,testing and commissioning of electrical equipment such as transformers, HT& LT panels
Matrixx Design Engineering, located in St. Louis, MO, Provides a full range of product development services to our clients. Our technical team comprises highly talented engineers possessing Master's Degrees in Electrical Engineering with a history of successful product development and innovative design experience. The Engineering staff is equally versed in both hardware and software design. Our team is available to assist with occasional peak workload or for long term partnering. Whether it is integrating the newest technology into a clients existing product line or developing a product or system to address a new market opportunity, Martrixx Design can provide a solution to meet your needs.
I am an electrical engineer. I have 2 years of experience in teaching and industry.
I'm an Electronic Engineer. I've been in the electronic industry for 8 years now, working in automotive design and manufacturing, consumer electronic design and general electric and electronic design. The industrial design is as important in an electronic device as it's own features. That's why I work with 3D models to be shure that the final assembly will work just as well as the theorical design. I like taking challenges and working with software I've never worked. I enjoy learning new stuff.
Florida Power Generation, at www.floridagen.com, is based in beautiful Collier County, Florida. We specialize in consulting, spec writing, and engineered services for all U.S. locations. Our focus on power generation, generators, transfer switches and switchgear means you receive the highest level of expertise at the lowest possible cost. We offer spec writing, bid preparation, management of bids, and the administration of projects and maintenance agreements. Our website lists all offered services and our areas of focus. Rates vary based on level of expertise required. Thanks for your time.
Electrical design experiences include a diverse array of manufacturing, mining/aggregates, environmental remediation, and water/wastewater plants.
If you need detailed Civil Engineering Drawings(Architectural,Structural,Electrical,Plumbing & Sewerage) , then i can prove to be your best choice. Moreover you can also consult me for Vetting and Seismic Evaluation Assessment of Buildings (Repair and Rehabilitation).
BEng in Electrical Engineering, MSc in Renewable Energy Engineering. Work experience in Industrial Design
11 Patents-2 technical books written Major experience in facilities design for critical applications in HVAC and electrical systems. Previously licensed in 26 states. 40 years experience designing HVAC, energy conservation, industrial, UPS/CPS systems for military, industrial, educational, general office, medical facilities.
To use my knowledge of electrical and control , honest way to meet company goals
Specialties: Auto-CAD, Microstation, MS-Office Electrical Load Calculations, Electrical Power and Distribution Systems.
Dear Client, My name is Stefan Chelariu, I am a 28 years old Applied Electronics Engineer from Romania and i would like to offer my services in the field of Electronics Engineering and Technology Product Development. My toolbox contains the following: > small signal analog circuit design > sensor interfacing and signal conditioning > power amplifiers > command and control of all types of motors > linear and switched power supplies > power electronics command and control circuit design > analog to digital and digital to analog converters > digital systems design, interfacing, communication protocols, level shifting > DSP > embedded systems > C language programming of microcontrollers > LCD/TFT display interfacing and GUI programming > touchscreen controllers > hardware networking > hardware to computer/web communications > PCB layout design for analog, digital or mixed boards > low noise, small signal PCB layout design > OrCAD, Proteus, Altium > MatLab > FEM
Electronic engineer with over 30 years Analog, digital and micro controller experience. I have my own fully equipped Office and able to call on further resources when required. Design skills include prototype assembly and test using through hole breadboard, then design using smt components, build and test. I am able to assemble smt and conventional pcb's. Also test to a high degree. I have been designing pcb's with many different cad systems, and currently using Altium designer 10.Skill level is multi layer smt and conventional pcb design, 3D model output with step information. Schematic entry from pdf block diagram or from the ground up.
Our commitment: a quality product on time at cost. Rocky Proctor is a senior mechanical engineer with over 25 years of experience managing projects through conception, planning, designing, prototyping, testing and manufacturing.
https://www.odesk.com/users/~0133252fdc5ab92043 10yrs Experience PCB Design & Layout Engineer with an excellent knowledge in PCB process, design, analysis and layout. I am very knowledgeable on different PCB designs according to clients?? specifications and requirements. I have experience on design of Radio Frequency (RF) modules (Router, ADSL. Wifi, USB Dongle, mini-PCI Network Cards 2.4GHz / 5GHz ), AC and DC Power Supply Modules, Wafer Probe Cards / Device Under Test Layout and Power splits. I can do work starting from Parts/Decal/Footprint/Symbol/Library Creation, Schematic Drawing, Schematic modifications, Component Placement, Routing, Trace Length Adjustment, Power Splits, Impedance-Controlled and High-Speed Traces, Analog and Digital Signals separation up to producing the Manufacturing Gerber Files, PCB Array or Panelization, Mechanical DXF, Files for Assembly, Build of Material (BOM). Knowledgeable on software such as Mentor Graphics PADS Layout, PADS Logic, PADS Router
I am very hard working, and i don't joke with my work.
19 years work experienced Electrical Engineer (B.E.Electrical) with wide range knowledge about industrial electronics in component level. Also has been completed the oil field related safety courses including PTW, IFR, H2S, IND and IND.
4 years practical Experience in MEP , HVAC , Industrial , Residential , Commercial Design , Substation Installation , Commissioning and Plant Erection , ETP Design A highly efficient, hardworking and talented Electrical Engineer with a comprehensive understanding of design processes and also manufacturing and construction methods. Experienced in all the design stages of a product, including research, development and manufacture right through to installation and final commissioning. Possessing a good team spirit, deadline orientated and having the ability to produce detailed technical specifications from client requirements.
Our aim is to become the best One Stop Engineering service provider. My team comprises of a group of highly trained and experienced Civil, Mechanical & Electrical Engineers who have strong backgrounds and experience in the field in all aspects of engineering & design. We strive not only to achieve what you have visualized but also improve that vision by incorporating into your projects solutions that are must in today's world. We will be there with you until our work match your idea and the work is only over when you are completely satisfied with it.We are interested to maintain our Repeat Client's Percentage. We are professionals but not at the cost of losing our HUMAN TOUCH. Your project is not just a work for us but a challenge to see how we can best use our ability.
At Three Guys LLC, we love engineering and design! The three guys who form Three Guys Engineering have backgrounds and careers in consumer energy product and automotive engineering. We have experience designing and developing alternative energy generators, consumer electronics and automotive components. In our consulting, we have experience design consumer global positioning systems & automotive components. We also preform engineering analysis and evaluation of existing technology, highlighting product cost and performance opportunities.
I offer professional CAD services in two platforms; AutoCAD and SolidWorks. I will work with you to find design solutions and take your product to the next level.
Over 17 years experience developing SCADA applications for companies in the the power industry. Specialties: Android Application Developer, SCADA Designer, PLC Controls, Customer Relations, Advanced Automation and Controls.
I am an Electronics/Instrumentation Engineer from GIKI Pakistan. I have developed my skills,during my course of study,of programming in Matlab,VB,Excel,Eagle,Embedded system,RF and communications protocols,Octave,C,PHP,AS3,HTML,Java script,Microwind,Verilog,Simulink,Labview,Latex,Pspice. I have also studied courses related to Technical writing,Communication skills,Project Management,Total Quality Management,Engineering Economy and Ethical and legal dimension.I believe that,having the required skills and knowledge,I can provide my best services to customers.
30 years experience in project management startup and commissioning Mechanical & Electrical sections of EPC Contracts in Lead Owners, representative / site manager positions Hands on troubleshooter with design capabilities can lead project sub-contractors Worldwide. Specialist in offshore E&I Oil & Gas Drilling Production Platform construction & start up (HUC) Shipyard repairs modifications all Ships, Jack ups, (Worlds biggest Semi sub). Dynamic Position systems Honeywell, Nutronics, installations and operations DCS and ESD Experience with all types of fuel derivatives on main engines and turbine controls power plants. Main Grid Power plant commissioning and site manager roles Budget conscientious effective communicator and with knowledge of implementing latest techniques, and writing procedures with international codes and standards such as the National Electrical Code (NEC), National Fire Codes (NFPA Codes, Standards, Recommended Practice and Guides), ANSI, IEEE
Engineer with electrical, computer sciences, Instrumentation and Control (I&C), Programmable Logical Controllers (PLCs) skills, I work for an energy worldwide company. French expatriate for several years, I live between Europe (France, Estonia) and Asia (China, Hong Kong).
I'm an Electrical Engineer, with experience in: - Hardware design - Measurement - Microcontroller (Atmel AVR, C, Codevision) - TestStand, CVI - Protel,Altium Designer , KiCAD, Word Excel, Access - programming in: - C - TCL
Scalar was founded in 2004 with a basic goal, support companies in their drive to sell manufactured products. Obviously this is a broad statement, but we have the experience to take a napkin sketch or a developed product proposal and convert it to a finished product. When it comes to today's creations, the involvement of artisans, engineers, specialty manufacturers and a team of positive attitude individuals make the difference.
I am an engineer with more than 7 years of experience. I work on projects of multiple disciplines in engineering including: mechanical, electrical, and industrial. I am well rounded and detail oriented. I offer great service and better prices.
Over 8 years of experience in the Electrical Engineering on Electrical Panel, Switch gear, control & power distribution, Electrical Plan, Schematic Drawing, Wiring Diagram, Layout, etc by- Eplan Pro Panel & Eplan Electric P8- Electrical Panel drawing, design, Engineering Software. Auto CAD-Computer Aided Design Software for Plant Layout and Single Line Diagram (SLD)
I strive to minimize difficulties from design input to output and to design boards for easy debug and manufacturability.
Electrical engineering services, including PCB design and prototyping. Test fixtures, rack mount modules, on-site engineering services.
I am a highly accomplished sales and technical professional with experience assessing business operations and understanding corporate objectives. I design and deploy engineering solutions. I provide high-quality customer support. I am a process-oriented, decisive leader. I have proven success establishing and nurturing client relationships, improving operational effectiveness and securing sales. As an innovative problem solver, I build a loyal client base and a solid industry name brand because of a commitment to excellence. I am a strong communicator and negotiator with superb interpersonal and training skills. I effectively convey detailed technical information to individuals at all levels of understanding. I can master innovative tools quickly.
HR5 Consulting, LLC We provide quality work, but unlike other providers, we guarantee our work, if you are not satisfied in any way, we will return your money, no questions asked, no hassle, and I mean it! Provider of Licensed (Arizona, USA) Professional Engineering Services. Owner and manager, John Hiett, holds a Master of Science & Bachelor of Science Degrees in Electrical Engineering -- Owner's Background and Experience -- Electronics, Electrical (High, Medium, & Low Voltage), Systems, Analysis, Software, Hardware, Forensics, Medical, Aeronautical, Aerospace, Robotics. Intellectual Property Analysis, Prior Art Searches, Patent Drawings Avionics: RTCA DO-160E, DO-254, DO-178, ARINC 744A-1 Hardware: Flight Deck Printing Systems (Honeywell/Boeing), Embedded Systems Software: RTOS VxWorks, C/C++, Basic, XML, HTML, Windows OS, Linux, MFC, Basic Project Management, Engineering Coordination
Koett Engineering is a one person freelance electronics design services consulting company. Koett Engineering provides clients with an electrical engineering resource to assist in all areas of electronics development, prototyping, manufacturing and maintenance. Koett specializes in electronics used in the Industrial Automation, and Motion Control industries. This includes the areas of power electronics used in motor drive applications, various sensor signal conditioning and embedded digital control. The sole consultant of Koett Engineering has more than 11+ years in the defense and aerospace industry developing electronics for the actuators and igniters used in modern weapon systems. For a full listing of all the detailed areas Koett Engineering has electronics design experience, visit www.koettengineering.com .
I'm an Architectural Engineer by trade and education with 4 years of experience in structures, design, HVAC, lighting and electrical. I also do material take-offs, estimates, and schedules. Due my natural passion for problem solving, I've been known to be great at many things. If your looking for results far above average, and can maintain a professional working relationship, I have exactly what you're looking for (if your job exceeds my skill-set I will gladly let you know). I work fast, and I'm results-oriented!
Hello.This is mobeen mahmood.I have completed my electrical engineering from a reputable university of pakistan i.e UET,TAXILA My aim in Elance is to help people who feel any problem in related fields and to proove my abilities .I hope you will give me a chance to proove myself.
I specialize in new product development of mechanical, electrical, and electronic products including those requiring embedded control. I am highly efficient at R&D of new products, design for manufacturability, and cost reduction. I am a proven technical engineering leader, and consistently successful in leading complex engineering projects to meet or exceed project objectives. Specialties: +Mechanical Design Engineering +Electrical and Electronic Design Engineering +Systems Engineering +Design of Robotics Systems, actuators, controls, sensors +Design of motion control systems, motors, amplifiers, inverters, power supplies +RF Design, Applications and Test +Research and Development +Product Development
I AM A a professional and talented electrical enigineers i have a 10 year experience in electronic design wireless ,bluetooth ,Integrated circuit ,FPGA i have a excellent designning skills and i also have a experience in product development and manufacture design . Architected the USB 3.0 host and development platform. Development of storage architecture that includes on-chip based hardware file system such as Recycler, Read Disturb, Bad Block Management, Address Management, LZ based lossless compression engine, security engine, Data Handler, Interrupt Manager, On-chip Memory Controller, Error Correction Switch, micro coded Flash controller and the CPU subsystem.
I can assist in every step of Product Realization, from concept to verification and validation. My skills include modeling circuit topologies and system architectures using EDA tools such as Orcad Pspice, Agilent ADS, Matlab, Mentor Modelsim. I am proficient in Microsoft Excel/Word/Power Point for design documentation.
Censo Engineering Solutions has been offering CAD, CAM, Product Design and Tool Design Services globally for the past three years. We have strong skills on new generation CAD / CAM /PLM software tools to support our design and development services. We have a unique track record of handling various challenging projects where time and reliability were crucial factors. We offer engineering services with unique combination of domain expertise, software knowledge and application knowledge. We have licensed versions of many CAD software tools including advanced design modules. With a balanced blend of manufacturing, CAM and tool design experience we can provide optimum results in New Product Development. We have strong knowledge on manufacturing processes, machine tools and product life cycle management.
I have a Bachelor of Electrical Engineering from the National Institute of Technology. In my current role at SAIFCO cements I have been the lead electrical engineer. I have excellent organisational and coordinating skills and enjoy juggling all aspects of a project, from designing, drawing circuitry and cost forecasting, to troubleshooting, conducting quality assurance and reporting.
Electrical power engineer
I AM ELECTRICAL ENGINEER B.TECH.
Hello, my name is Sean Marquez, a recent graduate of UCI in B.S., Mechanical Engineering, and something of an aspiring innovator. My mission is to help innovators and engineers develop elegant practical design solutions through analysis, recognizing constraints, and utilizing appropriate resources. Having managed and worked on a variety of projects, I've acquired a unique intuition for solving a multidisciplinary array of technical challenges, including, but not limited to mechanical & thermal design, avionics, power electronics, wireless communications, and embedded systems. My desired outcome for any project I work on is to help create a quality product. If you think you might be interested in my services, please feel free to send me an email or find me on linkedin. Best, Sean :)
I having a vast experiance in electrical engineering in automation and drive fields also in power systems.
I specialize in Product Development. My background includes experience in Mechanical Engineering (hinges, latches, linkages, gear systems), Electrical Engineering (motors, PCB design, PLC programming, MCU programming, RF systems), and Industrial Design (end-product styling, logo design, GUI).
ACADEMIC QUALIFICATION: COURSE INSTITUTION YEAR PERCENTAGE OF MARKS B.E (EEE) Veltech multi tech Dr.Rangarajan Dr.Sakunthala engineering college 2010-2013 6.92 CGPA DIPLOMA (EEE) Panimalar polytechnic college 2008-2010 90.54 H.S.C Sir.M.CT.M Higher Secondary School 2007-2008 55 S.S.L.C Sir.M.CT.M Higher Secondary School 2005-2006 77 INPLANT TRAINING: Completed 6days Traning at Bharat heavy electrical limited (BHEL), Vellore. PROJECT WORK: B.E:
I am an electrical engineer with training in 2D drawing and drafting. I specialize in creating or updating electrical drawings such as one lines, schematics, or wiring diagrams.
I'am an Electronic Engineer who wants to achieve an opportunity in a reputed organization where I can enhance and utilize my challenging and hardworking capabilities in the field of Electronic Engineering to full extent and that can provide me a gate for learning and career development.
I am Electrical And Information Engineer by Profession. I have Training experience in power sector such as Generation, Transmission and Distribution. The projects and research that have done, Final Year Project :Smart Fault Locating System for Distribution Network (11kV & 33kV) Research : Creating remote current sensor for High voltage line. Embedded System Project : Plotter (Image Processing) . Data Management System Project: Movies for All.
A hands on, mechanical design engineer with a diverse background and proven track record of developing concepts into real automated machines and patented products.Over 20 years of machine and systems design and building experience, combined with the ability to conceptualize and execute innovative robust solutions to challenging design problems. Along with project, personnel management, manufacturing experience and the capability to reduce bottom line costs from concept to prototype, to production and installation of world class turnkey automated capital equipment.
I am MS in Electrical Engineering. I have experience of 5 years in R&D and product development.
I am an Electronic Engineer by profession, having 6 years of experience as Electrical Engineer in a Smart Pcb company here in the Pakistan and a part time freelance PCB designer and Product developer.i have good experience in Amplifiers and filters,Auto CAD, Bluetooth,computer Engineering,Digital Electronics
I DEAL IN : Embedded C Firmware Development For classic 8051,8052 & advanced 8051 MCU's. Digital Signal & Systems Analysis & Rapid Algorithm Prototyping In Matlab Wireless Sensor Network Development Using Various Wireless Transceivers. Electric Circuits (Analogue&Digital) Design ,Testing & Simulation In Proteus. Sensor & Systems Implementation
With Electrical Engineering field Experience I have learned, ''Engineering correspond to implementation''.I have studied much mathematical courses like calculus,Mathematical Method including Differentiation Equation, Mathematical modeling, CAD, Analytical Geometry, Infinite Series, complex variable analysis, etc. Based on these mathematical course I have expertise in Electrical Engineering courses like circuit analysis, Electronic circuit Design, Electrical power system, power electronics, Electric Machine and many more Engineering courses. These courses are highly mounted on computer application skills, languages and software like C/C++,Lab view, MAT LAB, Visual studio, Electrical and electronics simulation software like P Spice PLC. I have good field experience of PLC, SCADA based system maintenance and controlling VFD's,also i have designed different projects of micro controller and on Samsung mini 2440.
I am Electrical and Electronics Engineer, published a paper in IEEE Xplore and have designed and fabricated various robots, a human action copying robot, sudoku solving robot are to mention few. Highly skilled to debug the circuit and solve the problem. Now am a full time elancer. Extensive knowledge on MsWord, Ms Excel. Typing speed - 60 WPM
maintenance electrical engineer
I recently earned a Master Degree in Electrical and Computers Engineering, and I work in project management about engineering at the multinational Efacec. As a volunteer and in my leisure times, I am still European coordinator of an organization of young entrepreneurs. I consider myself a knowledge-worker. I am passionate for challenges and constantly learning new things, and so over the past few years I have participated in several competitions, workshops and given use to my entrepreneurial side, carrying out several innovative initiatives in Portugal and in Europe. I have experience working and leading multidisciplinary teams, e.g. the project Towards Social Business in 2020 in collaboration with the Nobel Peace Prize, Muhammad Yunus, and people from China, India and Europe. In 2010 I was recognized by ThinkYoung as an "European Future Leader", as a result of the successful projects developed in several teams from different organizations and countries in Europe.
MSc (Electrical Engineer) with 10+ yrs. experience. Strong background in: -PLC machine/process automation, -Motion and drives (VFD, Servo,Step, Linear), -SCADA -Electrical design.
I am electrical engineer, I designing electrical diagram & making BOM for complete project.
First thing is all the data will be maintained Confidentially. I am graduated Electrical Engineer Currently working in Rail Domain Electrical Schematics development.Has extensive knowledge in Design & Drawing using All CAD tools. Worked for different types of projects layout drawing,Msoffice from home. Also ability to work on MSOffice. All the projects will be delivered on time with full efficiency. for the projects to be delivered we are team of 4 people to work on MS Office skills.
NRG-TRONICS inc. been founded in 2010 by Sebastien Grenier, an electrical engineer graduated from Laval University. We are based in Quebec City Canada. NRG-TRONICS inc. offers electronic design services and solutions. Leading in low power analog, microcontroller and FPGA design. NRG-TRONICS inc. differs from its competitors with its ideas. We solve problems by "thinking out of the box". Here is an example of the way we find some elegant solutions to some problems : http://ip.com/pat/US--9
I am responsible for Design Engineering electrical Substations Layouts, Busduct Layouts, Control room layouts, Overall cable trench / Tray layouts, Earthing Layouts, Single line diagrams, Schematic wiring diagrams, Interconnection diagrams etc. : Checked drawings : IDC with other department. : 3D Model review (Navis works) : MTOs : Vendor drawing review : Site support etc.