An engineering graduate and working as an executive in one of the leading telecom organization..........
I am currently a student of Electrical Engineering in Center For Advanced Studies in Engineering in Final year. I have worked in many robotics and automation projects.I have good writting,planning and technical skills.I always do my work with dedication and perfection.I have a good grip on all the skills mentioned below.
3d designer and multi-plataform programmer
I am a recent Mechanical Engineering graduate with co-op experience at a fossil fuel power plant. I have experience with a number of Arduino projects, involving programming in C/C++ and circuit design. I also have professional experience with 3d printing. If given an opportunity I would put in my best effort and benefit the company. I am ready to start work on your jobs today.
Iam completed my B.tech(EEE) in qis college.I have some practical experience in core sector....
The quest to achieve excellent image capture from a Small UAV is a daunting task. With this notion, we observed a gap with regards to knowledge and technical support available to us, hence XFLY Systems was conceptualized and expanded to help fill the void that exists in our North American Markets.
16 years of development experience in RF and Microwave and Analog electronics. Also skilled in micro controllers programmed in C.
Supply Chain consultants with extensive experience from fine tuning to complete overhaul of brand new or existing supply chain operations. Outsourcing help, Warehouse layout, VMI, SMI, Metrics, RFID & Barcoding, Order Fulfillment, CPFR, and other supply chain mechanisms. Six Sigma & Lean Manufacturing programs.
Project Management, Product Engineering & Development, Quality Improvements and Cost Reduction analysis CORE COMPETENCIES Six Sigma Green Belt & Statistic Math, Physics, and Chemistry skills FEA, CFD, CAD skills Self management Results oriented Creative
Bachelor of Science in Industrial Design, May 2011 Virginia Polytechnic Institute and State University (Virginia Tech), Blacksburg, VA 2.5 years of post-graduate industrial design & graphic design experience.
Ive worked in many areas of printing and computer graphics. Including cut vinyl and large format design.
Building up career in a challenging and rewarding position at a winning organization where creativity, sincerity, skill and performance are the criteria for ones appraisal and recognition.
BE Electrical Engineer with almost 5 years experience and 2 years in Project Planning E&I, Management, Installation, Drawings and Administration in Telecommunication projects. Proficient In AutoCAD, P3 and P6 and other Design programs and excellent Interpersonal skills.
I've 6 years of experience in analog/RF design. However, I've interest in blog/technical writing.
Innovator, Inventor, and developer of advanced concepts and production techniques, repeatedly leading to unique and highly successful products in several different industries. Strong program/team leader and direction setter with a history in Medical Products, Semiconductor packaging, Ultra high-density memory (DDR/SSD/DSP), and Military products, with many patented concepts and products. Excellent problem solving and creative abilities across a wide range of disciplines, as well as a personable and positive style, and a strong business sense.
We represent a company called Z-Crossing Solutions Pvt Ltd which is mainly targeted to provide solutions to customers embedded requirements. We can do prototypes and also mass manufacturing with MOQ. We have partners for the software requirements also for complete solutioning requirements. We can provide contacts to mechanical solution partners for mechanical design requirements.
I AM EXPERT IN DATA ENTRY WORK ,WRITING TRANSACTIONS MAKING ACCOUNTS
iam mechatronics engineering graduated with exellent with honor and i am now preparing master in mecahnical engineering
b Responsibilities To perform daily repair, maintenance and troubleshooting of electrical, mechanical and instrumentation of facility systems. Services with the use of lathe machine. Perform facility up keep in workshop and utility areas. Perform spare parts management and inventory. Provide high standard of safety and quality to all activities performed. Prompt reporting of abnormalities on any systems or property to supervisorengineer. To keep facilities areas, tools and equipment organized and clean. To machine custom-made mechanicalelectrical component.
Product designer, 6+ years experience in consumer electronics, domestic/household appliances and medical design.
13 years in the Navy as an acoustic analyst. Very detail oriented.
Engineering - Audio, Bluetooth, Embedded Systems, Acoustics SoundCheck [ListenInc] acoustics audio acoustical engineering real time programming device drivers debugging, systems analysis
I have done B.Tech(Electrical Engineering) from NIT Jamshedpur, India. I am working in the field of SCADA/EMS. I like solving puzzles.
Education: electrical engineer.English-Russian and Russian-English, English-Bulgarian, Bulgarian-Russian and Russian-Bulgarian, writing, data entry.
I am an engineer trained in all aspects of audio technology. I have professional experience in large scale production and studio facilities. My duties have included operating a mixing console for sporting events and drama as well as the editing and mixing recorded material. My technical training is paired with a highly artistic background. I have worked closely with musicians during the recording and editing process to achieve the desired final product for the client. I have full certification in Pro Tools HD as well as experience in other digital audio workstations. I am also a practiced musician with extensive knowledge in MIDI protocol and related devices. I am a resourceful problem solver and an eager learner. My strong work ethic would serve as a great asset to any team!
Hi , I'm an art graduate. Working for advertising agencies for last 25 years. worked for J.Walter Thompson, Maccann Erickson, Aerens Group etc. I have got my own creative set up which is going to be increasing brick by brick. So we will do all kind of designing as well as printing and AV work which an ad agency does. ( Note: work shown in portfolio is art directed by me while working for various advertising agencies.)
Product Development Engineer with experience in Quality Assurance, Product Management, Manufacturing and Project Management. Excellent, innovative leader with strong communications, training and presentation skills. Focused on results, quality and customer value with a proven record of implementing quality tools: six sigma, ISO9000, FMEA, process control, etc.
Designing 2D and 3D graphics and animation for games, visualization and illustration purposes. Also provide concept art and storyboarding.
MD. SHARIFUL ISLAM Address: Vill: Krishnanagar, Post: Katlagari Bazzar, P/S: Shailkupa, Dist: Jhenaidah Home Phone: --3 Office Phone :--3 Mobile : --7 e-mail:--, -- Career Objective: To build a career that allows me to be original, innovative honest to myself and to use acquired knowledge through working with a reputed national or multinational organization. Career Summary: Microsoft Office 2003, 2007, 2010, XP. Internet Brows, SEO, Back-link Builder, Graphics, 3D, Ulead Media Studio, Photoshop, Photography, HTML, Photoshop CS. etc Special Qualification: Microsoft Office 2003, 2007, 2010, XP. Internet Brows, SEO, Back-link Builder, Graphics, 3D, Ulead Media Studio, Photoshop, Photography, HTML, Photoshop CS. etc Employment History: Total Year of Experience : 7.8 Year(s) 1. Director ( November 01, 2011 - Continuing) Union Information Service Center Company Location : Sarutia, Shailkupa, Jhenaidah
Experienced hardware design engineer, 20 plus years in the hardware design industry including high speed logic design for both ASIC and FPGA implementation, digital circuit and PCB design and system wide architecture design and implementation.
i am hardworking
Looking out for VLSI design Jobs, has 4+ years of experiance in VLSI RTL to GDSII
cisco network engineer
I'm a electrical engineer with five years work experience!
Software engineer, project and product manager
Based in Bombay, India, I am a full time product designer working with 8051, PIC, PSoC, and ARM processors. I have been designing since the last 15 years and have done a few assignments in the US, Canada and Switzerland too. I have made various products to customers specs ranging from temperature controllers, PID controllers, Ramp & Soak controllers, Electronic lockers, automatic toilet flush, VT220 terminals, Gas monitoring and Interlock shutdown systems, etc.... If you think I could help you on your assignment, don't hesitate to ask.
Ph. D. Mechanical engineering, M.A.Sc. materials engineering, B.Sc. E.E. 15 years experience in wireless telecommunications. Own and operate metal machine shop. Will do electrical design, mechanical design, engineering consulting, custom fabrication, machining, prototypes, small volume production runs. Strong academic background in mathematical modeling and simulation.
I am a B.Tech ECE 2013 pass out job seeker. I want to join in a appropriate company.
I am Electrical(Telecommunication) engineer . I am interested in embedded system design using microcontrollers and have experience on PIC and ARM based microcontrollers Software and hardware development.
My name is Aamir and I am an electrical engineer looking for freelancing work. Current industry experience in embedded systems, lighting controls, and programming.
pls send me orignal work
I have enjoyed some of the best areas of work in basically two careers. After I earned my degree in Physics from UCB, I got to work at Hughes Aircraft Co on a new, two person team integrating radiation effects on microcircuits in the Components Dept. I started taking flying lessons, and decided to pursue a career as a pilot. I earned my certificates at Emery Aviation College in Colo. Springs, and worked as a flight Instructor in Fort Collins for about 4 years. Alaska had been my fantasy destination for as long as I can remember. So, with $424 I drove the AlCan in an old unreliable Mustang. I knew no one, but got a job based in the bush, Bethel, within 3 weeks. I just worked my way up the food chain into twins, turboprops, and the jet (LearJet 35). At 3 different companies, I always had many additional opportunities as a company instructor, Check Airman, and then Chief Pilot. I got to do some of the best flying that pilots ever get to do, but it was no picnic. So when I had a chance to
More than 15 years in Media, I had been doing jobs as Operations Supervisors in good TV Channels like MTV-Arabia, Nickelodeon-Arabia, Infinity TV, PTV World, Takbeer TV and Ummah Channel in UK. With the passage of time i realized that i should have some more Professional Skills to survive in this industry so i stepped in Productions as well, grabbed a DSLR and started shooting small documentaries and outdoor shoots, now i am fully equipped with all professional gear and team required for a good and quality Video Production with finishing
Advanced Ansys FEA (coupled field, transient). Microwave / wireless (HFSS, RF MEMS design). Solidworks.
I am enrolled in the graduate division of the department of education at Lanzhou University.I am good at translation from English into Chinese,and also I write programs like C#,windows phone app well.In fact I have a team to do your job,we will be responsible for every task.So hire me!
I strongly believe that I have the required skills set to make a valuable contribution to your organization. I have the ability to complete the task on time.
AERS Specialize in PLC Programming with Allen Bradley Equipment including all types of processors, Panelview Equipment and custom interfaces to scanners, PC real time displays, Microsoft Access or excel real-time interfaces. Programming for most types of scanners and LXE MX5-7 handheld PDF Scanners using Microsoft CE. Custom programs for touch screen display local to database or controlling equipment via PLC. With 42 years of electrical experience and 25 years of PLC experience no challenge is too difficult to handle.
8 years military service, multiple specialties. Pittsburg State University Engineering Program. Dedicated and Disciplined!
Addenda Electronics offers a wide variety of design and manufacturing services with a concentration on embedded CPU products.
We provide all types of professional PCB engineering works at an affordable price. We have 25 Designers at our end. Our software resources: Orcad, PADS, Altium, Allegro and PCB Editor, Expedition PCB
Over 10 years expertize in engineering design and turnkey project conceptualization.
I am M.Tech graduate in VlSI and Embeddes syetms design. I am good experence in design,development and Implementation. My experience are in following areas which includes 1 VLSI deisgn 2 FPGA based product design 3 RTL design unsing VHDL/Verilog/System C 4 ASIC 5 Front end design using VHDL/Verilog 6 Digital systems desgn 7 protocol design 8 Algorithm design 9 netlist creation 10 Embedded systems design I am too much deicated to elctronics filed. I had published 7 papers in different conferences.
MSc. in Microelectronics, working on a PhD. I currently work as CTO of a small startup company specializing in UWB radars, so I have a lot of experience with both embedded hardware and software all the way up to high level signal processing. I also have a few years of experience as Chief Systems Architect for a software/mobile company working as a systems developer.
Autocad Detailer with experience in Architectural, Residential, Mechanical, Greenhouse, Structural, and Millwork fields. Looking for a part time gig that requires creative thinking and flexible hours. Background in Arts, Mathematics, Drafting, Design. Computer literate. Fluent in Russian, English.
Hi,my name is tarance 22, from INDIA doing engineeriing studies in CIVIL.I have done computer courses of c++,c,and some hardware and networking couses.I always think about objects not as a problem.I have capability of generating ideas belongs to the objects to silve it.I used to computer evrytime because of my interest in computer,but God knows how i turns to construction field and encourage to myself to acheive the goals in this area.But I this field also full of excitement for the design and imagination. I somewhat innovative and creative activities adopted from my father and grandfather.And also have great opinion,analytic skills and taking right decisions,giving suggesion from my grandmother and mother.I have the ability to understand the clients objects and find the right solution.I experienced many things over internet about spam,fraud and fake.But here EVERYTHING IS GENUINE and WE ARE ALSO COME HERE TO DO ONLY GENUINE WORK TO MAKE YOU FEEL SATISFACTORY.
Ph.D. engineer with excellent background in optics, image processing and analysis, and hardware/software instrumentation, as well as expertise in biophysics and cell biology.
Actually , I have a positive mind set for any job coming on my way, there is no big or small job for me,I am ready to offer my skills to any client all over the world.
Iam a hardworking young man who is an expert in electrical engineering,i bilieve iam the right choice for you .
Clayton Mockabee and P. J. Looney formed Mockabee and Associates to give services in AutoCAD in residential and comercial design. We support architects and contractors with all their architectural detailing and drafting needs. Our team is well informed with the latest CAD programs available on the market and can support all of your architectural design work.
I am UK qualified Quantity Surveyor with experience of 6 years in the construction industry, my own company is A & A Design consortium which provide all building solution to the client and contractors. we are young team of qualified members working together for new development of country in the construction field. we always target the time and quality of the work.
Experience in the field of computer aided modeling, simulation and development of control systems and power converters (inverters) for electrical motor drives used in machine tools, rotating tables, industrial robots, telescopes, antennae, optical devices of space launches, etc.
Extensive experience in security industry operational and technology, Varied client base from mining to retail. CCTV systems layout designs, access and integrated systems and solutions.
Extensive experience in embedded system design and programming. Also can layout, prototype and test circuit designs. Background includes designing interfaces to various sensors including temperature sensors, accelerometers, light sensors and LCD/OLED displays.
I have real embedded work experience of 26 years, among which, Wireless /RFID Design experience of 6 years includes. I have good Analog design experience with Temperature/ Pressure Calibrators, Controllers and Process Transmitters both 2,4 wires. Worked with most of the microprocessors and microcontrollers including PIC series micros also in Lan, Zigbee, Timer & USB projects. Even used Honeywell Humidity chip, MEMS accelerometers and Compass chips. I have visited Philips HQ at Austria, and Singapore for RFID Trainings. Presently, doing part time PhD. Used extensively KEIL, IAR, MPLAB, ISE, MATLB, VB, VC++, .NET, DELPHI and LINUX for firmware and Software developments, I do also have good PCB design Experience with ORCAD, Protel and Proteus. I will definitely complete this work to your good satisfaction.
I am very organized, like to draw and paint. Use different programs to accomplish the goal. Always try to learn new things to get ahead.
A B.tech student studying Avionics in Indian Institute of Space Science and Technology, Thiruvananthapuram
I have experiance 6 year for microchip 8051, AVR , PIC , TI and PCB disigner .
Engineering manager and technical contributor with broad experience in hardware/software co-design, computers, computer systems, security, networking, embedded systems, firmware, device drivers.
DSPIA has been a full service turn-key provider for digital systems including embedded systems with micro-controllers, FPGAs and similar digital components. We have completed projects with Xilinx FPGAs, PIC and similar micro-controllers, x86 processors within communications, networking and consumer based digital systems.
I'm an Aerospace Engineer Graduate with a lot of experiences of using Matlab for various things.
Experience is everything in the real world of consumer and man/machine interface. "Technically possible" does not mean "practically workable" and only hands on experience in the real world knows the difference.
More than thirty (30) years producing Technical Documentation. Twenty (20) of those years using AutoCAD and Microsoft Office in developing Commercial Site Plans, Construction Drawings, Electrical Diagrams, Land Surveying & GIS Mapping. Degree in Electrical Technology. I am a Professional Perfectionist.
honest and a hard worker
Capabable at mechanical and electrical engineering. Very hands on and have excellent fabrication and troubleshooting skills. Very innovative and especially good at finding practical solutions to complicated problems.
I am an electrical engineer looking to put my skills to use and gain experience.
I'm your man! A natural born engineer - a professional dreamer. Equipped with some 5 year CAD experience. As a kid - Went to art school, played the trumped in the orchestra, and got bored at school, because it was too easy. Age 10 - Made my Lego electric using old parts from a copywriter; Age 12 - Started programming in Turbo Pascal; Age 14 - restored a 1954 car with my godfather; Age 16 - got third place in Latvia State physics Olympiad. Age 22 - After graduating Engineering cycled across Europe with a 1951 road bicycle - I got some motivation, I do. Went to University of Bradford in the UK, that's why I speak fluent technical English. Have worked in the industry more than a year - shade structures, vending, machines, bicycles, stairs, architecture, CAD drawings etc. , but mostly I enjoy building bicycles.
ready to work upon challenging situations, i am a hard worker & always keen to learn new things, completes all the assigned tasks any how. i am a good analyst and always does smart work.
I'm here to do your work!!!
Continuing to provide Mechanical Engineering and Manufacturing Engineering within a new product development and product design field with Mechanical Engineering and Manufacturing Engineering of Mil/Aero, Automotive, Business, Commercial, Consumer, Industrial, Medical Devices and Equipment, Portable Handheld Products and Telecommunication product markets.
11 years of PCB design/schematic capture experience in both Altium designer and OrCad. I have extensive experience in component creation and have an Associates degree in Electrical Engineering Technology. I have experience using solidworks for component modeling Experience designing circuits including: Balanced and unbalanced audio and video, Class D audio amplifiers, low level signal op-amps, filter circuits and switching DC power supply circuits. I've designed a manufacturing test fixture for verification audio amplification circuits and lighting control. Prepared engineering design specs to source LCD displays from Asian manufacturers. Amplifier/power supply and control hardware design of a wireless speaker using 2.4Ghz technology from a conceptual block diagram to the end product. Assisted in the hardware design of resistive touch screen technology. Experience troubleshooting both hardware and software based issues. Familiar with USB/ UART/ I2C/ I2S/ SPI/ WiFi/ and Composite Video
I'm TV Studio Engineer with 12 yrs Of working Exp.good at Translation "English 2 Arabic",Photo editing ,Video Editing,Audio Editing,word ,Pdf,excel,power point.
I am an engineer with 10+ years of experience.
Short description about yourself or your company
I work exclusively on embedded system ,from choosing components to choosing the plastic or metal case at the end of the product,I using basic to high level micro controller chips , programming using embedded C and my own PCB designing. Also i have wide range of experience on wireless and electrical related products .
Experienced EE (Georgia Tech MSEE) with 25+ years of product development experience. My fort
I am telecom engineer having sound skills on troubleshooting of GSM cell sites, Microwave networks. Also having sound knowledge of computer networks,network security as well as network designing.
Innovix Technologies is an R&D based organization providing design services for last three years. While providing free-lancing solutions to diversified market segments, we are manufacturing different security products including vehicle tracking systems, banks security systems and personal trackers. Our team includes electrical design engineers , Dot Net developer, Android developer and FPGA/ASIC engineer. Having capability to work on wide scope of projects,we promise to deliver what we commit.
Looking for freelance jobs using the skills I learned during engineering school, Master of Science and PhD work.
i am good at electric circuit designing and computer based work
I am an experienced Labview developer, 8 years experience, working in energy sector for some of the worlds biggest companies. Also, I have broad experience working as a Labview consultant. Ready to make small, medium and big Labview applications, using good practice, following design patterns. Possibility of using Labview OOP as per customer request.