Hi, I'm developer of embedded system and software deloper for PC. Also I have experience with developing SCADA system for industrial control system, have experience with developing GPS/GSM tracking system. I can develope new technical solutions for you. I can help you with your tasks and I think we realize your ideas very quick and professional. My credo - Work should be fun and get a good mood :)
I'm a licensed Professional Engineer, and owner of Garman Engineering, LLC. My group of electronics and mechanical engineers has extensive experience designing embedded systems for industrial, consumer, and military clients. We routinely develop custom hardware designs, and then create efficient firmware, which often requires many tradeoffs to reduce the cost and size of the final product. We can take your product from concept, through development, and into production, including offshore manufacturing, and retail packaging. Our engineers have a successful track record of designing systems to achieve MIL-STD and FCC certifications.
Over 9+Years of Experience in PCB Design in various Domains Like Power Supply, Consumer Electronics, Telecom, RF Boards. Working on High Speed Designs, Impedance Matching, Delay Tuning, Differential Routing, Hands on Experience in Xilinix(Saturn, Vertex), Altera(Cyclone) FPGA, DDR2, DDR3 PCB Designs. I am providing PCB Design Services. Including schematic capture, BOM generation, PCB layout if need board procurement, Please see below, Iam supporting following PCB design tools. ? Mentor Graphics PADS (9, 9.5) ? Altium Designer (10 and 2014) ? Cadence Allegro 16.5 ? Mentor Expedition PCB (EE2007) ? Or-Cad Layout Plus (15.7) ? Eagle (6.5) ? Pro-tel SE99 Also Other services Like Reverse Engineering PCB's(2-32 Layer PCB's), Obsolescence management, BOM Activities, Component Selection of Various Electronic Component Assemblies.
Hello. Looking for embedded system development? Please contact me. I have more than 10 years of experience in providing end-to-end turnkey solutions in Electronic Design Engineering, including Product Design & Development, PCB Design & Prototyping and Contract Manufacturing. I can assure you that the design and services we offer will be of highest quality as we were trained and groomed by two US veterans Pat Banker & Art Cote with decades of hardware and firmware design experience in Industrial, Aerospace, Medical and Consumer electronics. Their details can be found here: http://bankercote.com/about.htm In general at LEAP Embedded System, we: - Produce high quality design and we deliver. - Response quickly to customers. - Are fully responsible for our work. - Are Flexible and Transparent. - Never accept work from competitors to existing clients. Our Website: www.leap-embedded-system.com
We are EmbDes Technologies, focussed into Embedded Design Service, Custom design manufacturing solution, Intellectual Property creations, Hardware and PCB Layout design, BSP solution and Linux Device drivers. We are involving into Elance projects to provide Quality Assurance.
WiES Pvt Ltd is an Electronic Solution based establishment founded by a group of talented and passionate alumni from National Institute of Electronics and Information Technology Calicut, KL, India. Our mission is to provide innovative products and services to improve the life standard of the people, simplify things, add values, and to improve productivity and profitability. We are committed to quality and customer satisfaction through innovative technology, dedicated work force and consultation of experts in the industry. We have talents in electronics, embedded system, wireless communication, digital signal processing, medical electronics, security systems, and image processing. We provide different levels of services starting from consultation for small projects to end-to-end solutions which involves hardware, software and smart algorithms to meet the complete requirement of our customers.
Having professional experience in Embedded Systems and Linux programming. Love python and shell scripting.
Hello, We are an experienced team of developers for software and electronic hardware, embedded systems from India. We have strong expertise in Internet based technologies, big data architecture, mobile platforms, development and integration of embedded systems. We are a small team having excellent cross platform expertise. We have been recognized by MICROCHIP TECHNOLOGY INC (USA) as their AUTHORIZED DESIGN PARTNER in India. We have half a decade experience in delivering development services to clients based in USA and HongKong.
30 years as embedded systems design professional with broad experience including Wi-Fi, Solar Energy, RTOS, Embedded C, UI design, Embedded Linux, Protocols, Sensing, Controls, Web, System Architecture and System Integration and test. You can count on me to deliver a high quality, fully functional solution with integrity. I believe in relationships, efficiency and the big picture. Together we clarify your needs, budget, timeline and resources. From there I provide solutions that directly meet your requirements; no less, no more. Along with technical excellence and thoroughness, I become a partner in your success by sharing the benefit of my wisdom and experience.
I'm a control systems engineer, an embedded systems designer and an open source enthusiast. I have a good experience in embedded systems design from hardware design to software applications. I use altium designer for most of the projects i do, it offers a powerful environment for complex hardware design. I focus mostly on open hardware boards such as the olinuxino (imx233, allwinner A10) from Olimex, beagle board and of course Arduino. I have used the Raspberry pi for a couple of industrial grade projects including automation and wireless sensors network. For the software side, i use Gentoo and Yocto projects as my favorite embedded linux distributions and build systems, that meens i love waiting for code compiling :) . Linux offers a variety of tools and applications that will make your life easier. I'm excited about open source and how it can fix so many problems for people suffering from proprietary software. Me and you, we can bring your idea to life!
Girish is an Independent Embedded Systems Consultant with over 15 years of industry experience predominantly in firmware development. He provides services in the Embedded Systems domain. His skills covers both hardware and software like designing microcontroller/microprocessor based products, programming, RTOS and communication protocols. He has experience in building requirements and specifications, design document, test plans, writing application notes, technical paper, user manual & data sheets.
I'm a Game Developer and i have large experience of this field. I'm familiar with iOS & Android 2d & 3d game development using cocos2d, cocos2d-x, game maker and UNITY3D. My game development test score is TOP, very good. Especially, i most experienced the cocos2d-x and Unity3d. I have experience of strategy and rpg game development. I often use the Adobe Photoshop, Adobe After Effects, Adobe Flash, Blender ,3ds Max and Maya tool for game design. Also i integrated the in app purchase, social function(facebook, twitter, game centre), back end service using app42 and ads such as admob, adcolony, tapjoy, chart boost ,applifier, etc. I'd like to be a good worker for you.
I am a technical professional in the field of embedded systems, specializing in OS, Linux, Linux Device Drivers, Windows Device Drivers, RTOS, embedded firmware programming, Parallel Programming, etc. Embedded Software, Kernel internals and programming are my most interesting subjects for study and practice. At the same time, I am excellent at C programming and understand the hardware-software interface very well. I aspire to work in embedded firmware/kernel/driver level programming. I also love to be part of developing exciting products and applications using these skills and make something unique which would have a positive impact on the world. I am open to and look forward to any freelance activities that are related to the skills and qualifications that I possess. Do get in touch with me at -- or +--52 to know more about what I can do for your business. Current interests are in Parallel Processing and Computer Graphics.
I have more than twelve years designing experience in Industrial Communication Device and Automation of power systems. I am proficient in digital/analog design and have a large number of real-world experience in developing Embedded system(Powerpc/Arm/Dsp). I can take a job from design to manufacturing prototype.
Hello. We are a team of Embedded System Developers/Designers involved in developing Embedded Systems based Projects, Product Development and also providing Customized Embedded Solutions. We have worked on Technologies like : G.S.M./G.P.R.S. , Bluetooth, Zigbee, RF, R.F.I.D., 4 Wire Resistive Touchscreen, TFT LCD, Wi-Fi, etc based on 8051 / AVR / PIC / ARM 7 / STM8S / Arduino We reside in New Delhi, India and have a personal Lab for Development Work. We believe in staying true to our Profession and deliver the Best Work to our Clients. Specialties: Customized Embedded Solutions, Embedded Products, 8051 / AVR / PIC / ARM7 / Arduino Micro-controller based Projects, PCB Layout, Product Design, Robotics, Logistics and Technical Support
Experience in research and development of high-tech products aimed mainly for the oil and gas industry. Sensor development for instrumentation, embedded systems and control of industrial machines. Experience with various programming languages, C / C ++, Assembler, LabVIEW, Ladder, Grafet. I participated in all stages of an innovation project, from concept to final product delivery. I always try to learn news in my area and delve into the topics with the goal of offer the best solution for customers.
Our company provide to clients very quality engineering-design service with innovative ideas. We focused into Embedded System Design, Hardware and PCB Design, Firmware Design, High Level Software Design, BSP and Linux Device drivers for over 13 years. We are involved in the development of mechanical and electronic devices for embedded applications used in industry. We offer specialized service whenever you need...
I am a highly motivated engineer with a broad knowledge and range of experience, which I strive to utilise as much as possible. I have a passion for technology, understanding it and implementing it in new designs. My innovation and problem solving skills allow issues to be overcome and the best outcome to be found. I am more than capable of working within tight boundaries and with end users/customers to create high quality solutions to specification. - 5 Years industrial product development in electrical systems and software. - Holistic system design and implementation, using a variety of technologies to achieve desired goals. - Analogue and digital electronics design. - C and C++ development in both bare metal and operating system environments. - Embedded Linux development and implementation. - Masters Degree (Hons) in Mechatronic Engineering.
Embedded Systems Architect with focus on design & development of Industrial Electronic Embedded devices, Electronic Medical Devices and Systems, Consumer Electronic Devices Data Acquistion systems, Control Systems, Process Monitoring & Automation devices
25+ years hands-on experience in innovative and practical design of the electronic circuits, embedded software. Strong understanding of op-amp and transistor theory. Proficient with PADS, Altium, OrCAD, PSpice, MATLAB/Simulink. VHDL - (ModelSim, Xilinx WebPACK, Aldec), fluent in C++(OOP) - Brainbench Certificate in C/C++, RTOS, MS Visual C++/Linux Qt C++, openSUSE Linux (gcc, gdb, makefile), IAR, Keil. Familiar with USB, SPI, I2C, RS-XXX, GPIB, CAN, Ethernet. MILSTD-1553, ARINC 429 interfaces. Combination of skills in programming, electronic circuits design, sensors and precise mechanics. Good analytic skills, able to solve technical problems devising simple and elegant
********"YOUR IDEAS, MY SOLUTIONS********** Customer satisfaction is my first priority. We are from ONE of TWO most prestigious universities in Vietnam - the University of Science, Vietnam National University, Ho Chi Minh City, Vietnam (VNU-HCMUS). With 3-year experience in the area of EMBEDDED SYSTEMS design, we believe that we can MAKE YOUR IDEAS INTO REALITY. ?Moving forward, I would like to tirelessly dedicate my work to your job. I?m very excited to offer my services for your job. Please feel free to contact me directly to discuss this position further.? I am mostly online at Yahoo Messenger, Google Talk and Skype. We can discuss there in details, if you are interested. I wish you'd give me this chance.
Extensive work experience in Embedded Systems - Software and Hardware for Automotive and Consumer Electronic Products for over 15 years. Have worked for major Automotive Tier-1 suppliers. Proficient in C, C++, Assembly, and UML. Skilled in Design, Coding, Testing, and Problem solving. Masters Degree from University of Michigan - Dearborn, and Bachelors in Electrical and Electronics Engineering. Experienced in SPI, I2C, UART, CAN, LIN, ARINC communication bus/protocols.
TESO is a technology oriented organization specialized in embedded hardware and software design services. Since its establishment in 2010, TESO has won the confidence of its valuable customers. The company specializes in embedded systems development, custom hardware design, digital signal processing, and telecommunication systems design. We offer high end hardware/software solutions in telecommunication, medical and consumer electronic area, providing custom "from the scratch" solutions depending on customer needs.
Gale Labs, LLC is a small electrical engineering research and development company located in Colorado Springs, CO specializing in embedded systems and single board computers. The engineers at Gale Labs have a wide range of skills, including significant experience in printed circuit board design, prototyping, and debugging, embedded systems, high-powered single board computers, power electronics, microcontroller systems, FPGAs/CPLDs, RF design, software build systems, large software systems, and high-reliability systems with stringent cost, size, weight, and power (CSWAP) requirements. Gale Labs particularly excels at printed circuit board design, having experience with high speed (10+ Gbps) digital and mixed signal boards up to 32 layers with tight impedance tolerances and phase-/length-matching requirements.
I represent for Inteliss Ltd., an embedded system outsourcing company based in Vietnam. Inteliss provides a range of services which includes software and firmware design, electronic design and prototyping to automation and test system design. We specialize in the Industrial Control and Automation industry, smart sensors, with various communication protocols such as EtherNet/IP, ProfiNet, CANOpen, DeviceNet? We pride ourselves in focusing on quality, reliability at a very competitive price. We strive to help our clients achieve their goals by excelling in their software systems. Our clients include GE Energy, Camlin Technologies, Labrie Group, Seidel and many more.
I am post graduate in Physics with electronics Specialization. I have good Research and development experience in Embedded systems and PC based Instrumentation.
Caliber Embedded Technologies India Pvt.Ltd is a leading single stop solution provider of hardware and software development solutions for Embedded real-time systems to the reputed companies across worldwide. We has grown to become a market leader in providing Embedded system, VLSI design and PCB CAM solutions to meet the demanding needs of the International market.
We are a passionate and innovative engineering team with expertise in various high end technology domains, committed to deliver supreme quality, cost effective and time bound services to our valued customers. We offer services in Real Time Embedded System Design, Real Time Embedded Software Development, Microcontroller/DSP/FPGA based System Design, DSP Software Development, Hardware Design and Robotics. Vision: To improve the whole quality of life through technological intervention making world a better place to live for all. Goal: To deliver supreme quality, cost effective and time bound services to our customers out of innovative engineering passion
I'm professional designer of electronics hardware and software using modern microcontrollers - mostly ARM based, PIC and AVR, but I can handle any other architecture, it's not a problem. Also I've worked a lot with FPGAs (Altera and Xilinx) and can write a VHDL or Verilog code. I can handle a full desing cicle - conceptual part of design, schematic, pcb work and pcb production control. I have a strong C (assembly if necessary for time-critical parts) language knowledge to develop uC firmware. I have good experience of SMD soldering work, and I've got all necessary equipment (even a little lab), so it's not a problem to assembly and test your device quickly right here and now. Looking forward for interesting tasks and long-term cooperation!
20+ years of experience in software and hardware development. 10+ years of project management experience for international clients. Major skills are embedded system development on various micros, C and C++ programming, PHP development and JAVA development.
Mechatronics Engineer with specialization in Robotics and Intelligent Machine Engineering. I am expert in Programming, Desigining Circuits, Simulation, and Prototyping.
MY SUCCESS IS TO MAKE CUSTOMERS LEAVE HAPPY Thank you for your valuable opportunities!!! With 5-year expertise in the area of LINUX / WINDOWS-BASED EMBEDDED SYSTEMS DESIGN including hardware, firmware, and software design, I believe my abilities would be perfect for you.
10 years solid experiences in embedded systems, firmware, micro electronics, native operating system, RTOS and system integration. 6 years working with applied automation technology such as green building (BAS, IBMS), energy management system and smart grid. Good knowledge on PLC, DDC, MODBUS, BACnet, Lonworks, OPC, and DNP3 communication protocol. 4 years working on smart card industry domain especially on telecom, secure ID and micro payment applications. involving on Leadership, smart card operating system architecture design, smart card custom application and operating system portation.
GadgEon is an Embedded System Services Company set up by a team of highly-experienced technology professionals with special focus on outsourced product development in the area of Internet of Things. The company is situated in Kochi, the emerging IT hub in the South Indian state of Kerala, known for its high intellectual capital and skilled workforce. The founders of the company share 120 man years of product engineering and innovation experience in embedded technologies, telecom and datacom among them. Gadgeon offers Product Engineering Services covering (a) Product realization from Specifications to Prototypes (b) Hardware design/ Firmware/ Embedded Application development based on processor/ micro-controller families from ARM, TI and PIC (c) Wireless firmware development for low power devices using WiFi, BLE, ZigBee, NFC and Simpliciti protocols (d) Embedded OS - Linux, Android, freeRTOS, COOS, etc (e) Linux Device driver and Embedded Application Development using C/C++
o Visual FoxPro progamming solutions for small businesses, non-profits, and municipalities. o C programming for Arduino based embedded systems o Developed wireless data reporting and control for embedded systems o Experienced with hardware support modules used with the Arduino controller
I am a computer engineer working in the industry and am interested in getting involved with some exciting embedded systems projects on the side. I currently hold a Bachelor's in Electrical Engineering with a specialty in Embedded systems. My current expertise is focused on software, including software design, scripting, web development and working with Python. My expertise from school involves designing embedded systems from start to finish with complete vertical integration (hardware, firmware, software, etc.) and is where I enjoy working most. I enjoy outdoor activities such as backpacking and hiking and also enjoy playing my guitar in my free time.
Our company based in Islamabad, Pakistan established with an aim of providing services and expert solution in fields of Embedded systems, Access control and automation systems, Biometric attendance systems, Electronic tolling systems, Generic Security System. We also act as a private contractor in Pakistan for importing electronic equipment from China and other countries. Our company has a a lot of experience in importing and delivering electronic equipment from all over the world to our clients.
Highly skilled electronics and embedded systems engineer with broad experience helping clients create products and bring them successfully to market. Able to do it all: initial system design, components/supplier research & selection, analog/digital circuit design, PCB design/layout, rapid prototype construction, firmware development/debug (C, Assembly), product debug, regulatory approvals (safety, FCC, etc.), domestic & overseas manufacturing, technical problem solving. Equally effective solo or in team environments. Outstanding skills/experience collaborating with other engineers, suppliers, and customers all over the world. I am highly self-motivated, energetic, and passionate in pursuit of excellence and solid results with the utmost integrity.
TECH DZYN Solutions is an embedded solutions provider company which excels in analog and digital electronic systems. we aim to provide cost effective solutions to our clients. We have qualified professional in broad engineering spectrum
Welcome to Universe of Innovation Indy Technologies is a Company based in United Kingdom, providing Professional Software, Firmware and Support Solutions to its clients all over the World. We use Modern World Cutting-Edge Technology for a Smarter, Reliable, Robust and Affordable Solutions to satisfy wide-range of Business requirements. Indy Technologies believe in Innovating better Solutions for our clients requirements and deliver them at Excellence. The Services and Solutions provided by us are: * Application Software Development using Modern Programming Tools. * Embedded Software/Firmware Development for Gadgets/Portable Devices on different Micro-controller Architectures. * Following Safety Standards related to Software Development Life-Cycle. * Documentation. * User Training and Support. PLease check Service Description for Technical qualifications.
I am an embedded software engineer with a background in product concept, software development, hardware development, product launch and support. I have worked for both large and small manufacturing companies with focus recently on medical devices. I have been the leader for software, electronics, and RF engineers, and developed projects with software, hardware, mechanical engineers, plus quality, regulatory, marketing, supply chain, manufacturing, and contract manufacturers. My most important technical skills are C/C++ for ARM, Microchip, Arduino and Linux.
Embedded Systems Developers
With a background in engineering and experience in the development of the embedded systems,wireless devices,writing firmware ,finalizing the project reports , I can do full justice to any part of the product life cycle.Worked extensivley with Jennic ,Nordic ,Microchip SOCs/TRx like JN5139,JN5148,NRF24Z1,nRF24l01+(Trx),MRF24WG0MB and industry leading microcontrollers like microchip and ST. Led a team for RF network establishment and optimisation.Apart from the above I have working knowledge of HTML,CSS,Dreamweaver,PHP and LAMP technologies
The Propress team members have provided innovative solutions to complex engineering problems in the Automobile, aerospace, defense, steel, transportation.we deals in the field of embedded systems design,GPRS, GSM., GPS including GPS LCD, GPS CAMERA, anti theft alarm, tracking systems, security lock.
I have experience in developing embedded system based electronic projects as per customer requirement. skills: circuit design , simulation, coding in c language for pic and atmel microcontrollers., etc
We are a team of engineers with 10 to 25+ years of design experience in embedded system and telecom/ICT industry. We offer design & development support for complete electronics/ embedded system /product - including requirement analysis (from requirement to deployment). This includes design, development and validation of Circuit/ PCB, Embedded Software /Firmware, Linux system SW, RTL/ FPGA systems and embedded applications. Team have excellent experience in high tech system designs / complete product development, such as ATCA/ AMC blades, ATX boards, Network/ IP Cameras, DVRs, Machine vision camera, ARM SoC based system designs, Silicon validation board and Reference design platforms, SBCs, AVB/ONE based automobile embedded systems etc. We also provide consultancy service in System analysis and performance optimization/ improvement, UML based analysis and design. We also provide application oriented training program for engineers in Embedded System Design (HW /FW /SW/ RTL)
Over 6 years for Electronics engineer in field of H/W, S/W development, technical writing. Experienced about the GPS/GPRS, RF module, Bluetooth, LCD, Sensor boards
I'm an expert embedded programmer with hands on experience in PIC Series, Atmega Series, Arduino, Renesas microcontrollers. And familiar with IDEs like MPLAB, HEW, Arduino, AVR Studio etc. I'm also familiar with PCB designing software like EAGLE, KICAD, PROTEUS etc. Currently I'm helping students with Academic Projects, Robotics and Embedded System Training, Academic Seminars and Workshops etc.
We have extensive expertise in product design for... Power & Energy measurement and Control. Power Electronics. Wireless monitoring and control using Xbee,Zigbee, GSM, GPRS. Battery powered low power devices, medical devices,wearable electronics. Automation, Test automation, Control systems. Intel 808x, Motorola 68xxx, PIC DSPIC, MSP430, ST ARM, ATMEL, RENESAS ORCAD, P_CAD Assembly, C C++ C# JAVA VB Matlab, Android App. For details see www.bluewaveinfotech.com
eLab Solution Provider is a private consultancy. We are providing Technical Assistance to Academic, Commercial, Industrial, Defense and Aerospace Sectors.
Electronics Engineer with specialization in control systems plus 11 years experience with expertise in the following areas. (1) PCB Design using OrCAD, Eagle, PCAD and Altium. (2) C/C++ Code development for embedded processors from Microchip,Arduino,ARM, AVR, Atmel, TI. (3) Embedded system design and development involving FPGA from major vedors: Xilinx, Altera, Actel, Atmel (4) MATLAB analysis and complex system development. (5) PLC programming (6) RF Circuit design in ADS and system development. (7) Electromechanical systems development (8) Pneumatic and hydarulic Systems development. (9) Custom Transformer Design and sampling. I ensure customer satisfaction through extensive interaction during system development cycle.
I have diverse experience in different fields of technology.In my undergraduate studies (electronics) I learnt Auto cad and started Practicing it for Projects and Mechanical Models, then to gain Professional experience spent one year as a part time job in an Architect office on the basis of my "Diploma in Architecture Design". As Electronics was my native field of Study So, I did numerous Projects related to Electronic circuit design.It has been 3 years since i am Practicing Electronics and CAD. This diversity enables me to perform excellent in both design and Implementation parts of a Project / Product. your Products and Projects can be Designed from inception to delivery.My Preference will be to Provide you satisfactory results and services at affordable cost.
Certified and Experienced Java programmer. I have experience in web programming, GUI, applets, database, PHP, Ajax and distributed computing. I have experience in developing firmware for embedded systems, experience with serial communication protocols like I2C, SPI and 1-wire. I have developed a custom single bus communication protocol and have implemented the network layers.
Areas Of Expertise: DSP Microcontroller Symbian C C++ Java Matlab OpenGL Machine Learning
I am a professional Electronics Engineer and having 2 years of experience in Microcontroller programming, Firmware designing and FPGAs. I have also a vast experience in analog and digital integration and product development. I got a team of professional PCB designers and mechanical engineers for the fulfilment of your product designing.
Designed panels, PLC code, and HMI code. Designed embedded HW and FW, system architecture, schematics, and boards. Designed embedded commercial, automotive, military, and medical devices. Designed FW with IAR, Eclipse, GNU/GDB, MPLABS, CodeWarrior. Designed AC/DC and DC/DC supplies, and battery chargers Designed HW with Orcad, PADS, Allegro, Eagle, ViewDraw, Mathcad, and Hyperlynx. Designed using 68332, 68HC11, x86, PowerPC, SH7760, PIC, AVR, ARM, MSP430. Designed FPGA, CPLD, and EPLD devices using VHDL, Synplify, Xilinx, and Altera tools. Designed up to 32-bit embedded systems with up to 12-layer boards. Simulated boards. Designed SW with C, Python, and Bash/AWK/SED. Utilized PVCS, TLIB, CVS, SVN, and git version control systems. Took products through regulatory testing at UL and TUV. Managed HW and FW engineers. Evaluated requirements and wrote proposals. Mentored / Trained Engineers and Executives Authored magazine article
Developing Customized modules for embedded systems. Familiar with PIC micro-controllers, Arduino. Can develop prototype circuits.
Complete Product Development of M2M automation and Smart Energy solutions - from requirements gathering, quick-turn concept prototyping, to (H/w, S/w) co-design, development, to validation testing and contract manufacturing. ? Keil MDK-ARM, IAR-EWARM, NETOS, FreeRTOS, MQX, Contiki-OS, Embedded-Linux (Debian, OpenWRT, OpenMesh), TimeSys/LinuxLink, Android, WinCE/XP-Embedded*, OSGi-R4.x, LonWorks, BACnet, 1Wire, Modbus. ? M2M, IPSO, Internet-of-Things, IPv6 WSN, 6LoWPAN, NXP LPC21xx/23xx/ 17xx, 8051, PSoC, AVR, MSP, MC13224, Digi ConnectCore/ ConnectME, Freescale Kinetis, Vybrid 6xx dual core processors ? W3C compliant RESTful web-services for resource-constrained battery powered WSN nodes. ? Web portal, high-performance messaging patterns, Pub-Sub, web-app oriented application development. Automated Demand Response, Energy Management, Building Automation Product Development/ Management, Program Management, Systems Engineering, System Architecture, Embedded Systems
I have a Masters degree in Electronics engineering. I have got 4 years of professional experience. I offer services in the areas of programming, hardware and software designing, Schematic designing, PCB layout, Micro-controller programming.I provide services by keeping the cost to minimum and providing an excellent high quality results. I am innovative, talented, high academic achiever with vast experience to deliver the best results in the areas of hardware and software designing. I have skills in electronics, programming, PCB designing, Matlab, Image and Signal processing. I am effective, disciplined and reliable worker who has the ability to meet targets and objectives and has the persistence to achieve the highest standard in every undertaking.
I have completed by graduation in Electronics and Communication and has been working in Embedded systems development for the past 7.5 years. Having worked on automotive and consumer applications development, I have keen interest in developing embedded designs. I have strong experience in C and assembly. My work includes from 8 bit to 32 bit microcontrollers. I have a strong knowledge on RTOS development and integration.
I am a PhD in Electrical Engineering / Materials Science but I have a diverse background in computer engineering, embedded systems, semiconductor physics, sensors, infrared physics, test automation, etc. With over 10 years in compound semiconductor device design / modeling, fabrication, and test and the development of systems and sub-systems built around these devices I bring a wealth of knowledge and experience to the table.
Electronics Engineer with designing experience of 7 years and counting. Currently working as an Embedded System Engineer and Head of PCB Layout Designing and Manufacturing. Working experience on GSM, GPS, Microcontrollers (Atmel 8051, PIC 18Fxx, 16Fxx), PCB Designing using Proteus ISIS / ARIES, Altium Designer 10, EAGLE 6, OrCAD 9 and 16, PAD2PAD. Extensive experience in Digital Designing and Embedded Controlling. Hands on experience in Multi-Layered PCB Designing and Manufacturing. Currently running an E-business: http://engineers-guild.webs.com
Short description about yourself or your companyEmbedded Systems Hardware / Software Design
A seasoned engineer experienced in all aspects of the product development lifecycle. Areas of expertise include: -- Scaling -- Embedded systems -- Server development -- PKI -- Security -- Identity management -- Distributed applications -- LAMP application development -- JAVA -- Solaris -- System and software integration -- System hardening -- Cloud computing (S3, AWS, Rightscale) Specifically interested in unique development challenges that can form the basis for an extended relationship.
The team in Syskevi Technologies bring about 15 years of experience in building Real Time Systems. Some of the top clients associated are Adobe, Samsung, Motorola, Hyundai Motors and others. We have the ability to design and deliver complete product to the Client's satisfaction. Our expertise lie in the Embedded Software Development. Our partners in APAC region help us in designing world class hardware. We integrate seamlessly in delivering to the expectations of the Clients.
Kevin brings over 20 years of leadership and experience as an embedded systems developer with a strong focus on wireless communications and sensor networks. Kevin?s achievements include product,hardware and software design and development. From concept creation to manufactured product, Kevin has developed both industrial and commercial embedded solutions while developing a broad set of skills and abilities. For example, Kevin designed an embedded 433Mhz RF based remote sensing and control system, including a python based web served network/node management. In another example, Kevin developed an 2.4 Ghz RFID based collision avoidance/work protection system. Just a couple of concept through PCB, software/firmware system integration successes. Kevin can help create embedded, product and circuit design and software solutions using careful and methodical approaches. Craftsmanship and customer satisfaction are core values.
I am a Electronics Engineer with 4+ years of experience in Embedded Systems, Electronics and Control Systems Design. Over the last three years I have developed Embedded Systems for a wide range of applications from handheld game to robotics, embedded image processing applications, wireless sensor networks, CNC Machine's firmare etc. I can work with just a concept which requires implementation or porting/modifying an existing project. In my projects, I have worked with many micro-controller platforms PIC, AVR, ARM, Freescale and some open source platforms Arduino, Pandaboard and Beaglebone etc. I also have experience in designing applications for embedded image processing using OpenCV. I have excellent Problem Solving Skills. I am creative person with a professional attitude and a fast learner. My Experties include - (C/C++),All microcontroller families - Knowledge of I2C, SPI, UART,CAN,LIN,QT Framework,OpenCV,Driver Development,MPLAB, microC, Proteus, eagle, MATLAB,shell sc
I was a tinkerer as a kid, always fixing or taking something apart and putting it back together. As I grew older, I became fascinated with electronics and had the chance to pursue an electrical engineering degree. I've not stopped learning since, and in the years that followed spent a lot of time working with embedded systems and product development. It's now been more than three decades, and I've acquired some rather unique skills along the way in electro-optics, RF/wireless, embedded, and harsh environment systems. I still get a kick out of making gadgets work, work better, or creating new ones, and enjoy every aspect of my work from brainstorming to production. If it's not obvious, I really like what I do. I've had the opportunity to work in the Mil-Aero, Industrial, Automotive, and Bio-Medical and Life Science sectors. Thank you for taking time to consider me for your electrical engineering or product development needs, whatever your line of business may be.
I am an Embedded Hardware Engineer did my btech from VIT University, working with Embedded System and Sensor Interfacing from the last 4+ years as a hobbyist plus on the projects with different companies like National Instruments, Texas Instruments, IEEE bangalore, Thinnkware, BEMPU, Glocal Healthcare. Made a Humanoid Robot to repersent INDIA in Robo games USA. Link to news paper coverage: http://www.thehindu.com/todays-paper/tp-national/article3899785.ece I was awarded with Budding Innovator Award from the National Research Development Corporation, Ministry of Sciences Government of INDIA for the project "Virtually Writing Gloves" which is based on Arduino. Skills: Embedded System, RTOS, PCB designing, Matlab, Labview.
Versatile R&D professional with 5+ years experience in conceptualization and development of microprocessor-based products and solutions. Specialized skills in Automotive domain software Development , Process Control, Home Automation Systems, Industrial Systems. Diverse experience in solving Automotive software problems for various OEM's in India, and across the borders.
electrical engineer with a great experience in the fields of embedded systems, automation, robotics, Arduino , pic , AVR , Labview, Printed circuit board design and fabrication, Arduino shields
Energetic, highly motivated, and organized electrical engineering professional with experience in design and development. Attentive to detail; excellent analytical and problem-solving skills; proven self-starter with strong communication and interpersonal skills. Eager to learn new skills and gain valuable working experience.
Vast experience in the hardware design and the programming of embedded systems since 1993. Examples include (but not limited to) 8-bit 8051, 16-bit MSP430 ultra-low power devices, and 32-bit ARM Cortex-M microcontrollers. Programming these systems in C/C++, bare-metal and with FreeRTOS. Digital logic design in VHDL for FPGAs from Xilinx and Altera. Hardware design also (Altium, Eagle, OrCAD)
We are a team of a PCB designer, EMC engineer and Embedded software developer. The team has 5+ years of experience in the fieled of PCB design and embedded software development.
Embionics is a solution provider in product development and its related services in Automation and Security industry. Embionics predominantly works in data sensing, data logging, data reporting and data analytics in specified industry. We have a resource pool with a collective experience of 40 years in the field of embedded technologies. The offerings broadly include: i) System engineering ii) Hardware engineering iii) Software engineering iv) Verification and validation v) Manufacturing vi) Support
I recently graduated from University of Illinois (UIUC) with a mechanical engineering degree. I have a wide range of experience and would love to help with projects ranging from simple to complex. I have successfully completed numerous embedded systems projects using both the Arduino (ATmega328) and the MSP430. My experience includes PCB design in eagle, electronics prototyping, and interfacing with a variety of components. I have done research in a state estimation research group and have implemented proportional and proportional-integral controllers. I have experience programming embedded systems in C, and have also used Python and Matlab for data analysis / system modelling. For more, visit my Linkedin profile here: http://www.linkedin.com/in/zrenwick
Development of embedded software and systems for data aquisition and control. Hardware-close programming of energy efficient battery-powered modules. Ad-hoc wireless networks, sensor networks, ZigBee, BT, ISM band transceivers. Interfacing sensors and actuators to computer systems using WSA (REST, SOAP), SCADA/OPC. Signal processing, Matlab modeling and simulation. Transfer of video and audio over radio links, IP, Internet. Adaptive codecs, turbo coding. FPGA programming with Verilog and VHDL. Linux programming (kernel and user-space). Formal methods for code verification and test generation, model-driven design methodology. Hardware design if required as a part of a larger project.
34 years experience developing Embedded & Real-Time Systems.
After working experience of Industrial, Building and Home Automation , Monitoring and controlling, Interested to work on the development of Products for these applications. For that, I did Real Time System Designing Course. Did few successful and interesting projects during the course. During the projects got experienced in lot many new technologies. Very much enthusiastic for new challenging projects in the emerging field of Internet Of Things.
I am an excellent embedded system engineer. I worked over 10 years on Embedded system branch. I have developed many products that contain PIC32 CPUs, TI MPUs, ARM series MPUs, 8051 MPUs, Atmega MPUs, FPGA(Xilinx and Altera) and so on. I have rich experience for wireless branch including Zigbee, Bluetooth, Z-Wave, Wifi and RFID. Also I have developed some products having biometric technology(Fingerprint).
I offer engineering and technical expertise for hardware and software development of embedded electronic systems. Application development using popular technologies such as Arduino, Atmel AVR, Bluetooth LE., GPS, Wifi. Well-versed with C,C++, Java, Altium Designer. Patent application & documentation for regulatory agencies (FCC, IC, CE) Design of enclosure and 3D models using Solidworks. From prototype to manufacturing service and support. Gerald Plamondon is the principal engineer with a degree in Engineering Physics. He has been developing commercial embedded wireless equipment for the last 10 years.
PE MicroSys. is a network consortium of experienced consultants, seasoned Industry R&D professionals and skilled developers working in the cutting edge state of the art technology solutions in the area of Electronics and System Engineering, Embedded Systems, Circuit Designing, Software Development. We have a World class team of professionals placed in the top 5% on the chart. PE believes in providing the best solution on the grounds of new ideas and technology to the clients with complete review, analysis and market survey of the project. The systematic approach comprises of: Product Requirement Document (Project Review, Feature requirements, Market analysis). RnD Phase. Follow ups.
Technosolve Systems( www.technosolve.in) is a company engaged in providing Embedded Technology solutions to its clients. We specialize in Embedded Software development ( embedded linux, wince, ucos, uclinux etc) and embedded hardware development ( cortex, arm, PIC, 8051 ). We can develop any product from scratch as we have experience in board design, pcb design, pcb manufacturing, bsp development, embedded application development.
Real-Time Embedded Systems Design from the ground up.
Embedded software expertise in the medical device, automotive, and industrial markets. Projects include architecture, firmware, device drivers, systems engineering, and automated design verification testing. Specialties: Embedded software/firmware, medical devices, instruments, automotive, industrial, low power, software architecture, Bluetooth, real-time operating systems, FDA, IEC 62304, Cortex-M3, ARM9, PIC, 68K, x86, QT, Linux, C/C++/C#, Java, Python, serial communications, SPI, I2C, touchscreen, and GUI design.
A hands-on technology specialist with keen interest in Internet of Things. Software Associates offers a unique combination of skills in web technologies, smart sensor integration, PCB schematic & layout design and embedded programming for end-to-end execution of IoT projects. With an experience of 15 years as an offshore web development company, the IoT division of Software Associates started in 2014. Our capabilities: Devices/Platforms: Embedded Systems, Raspberry Pi, Arduino, Spark Core Platform, Microcontrollers (PIC, Atmel etc.) Hardware: RFID; UART, SPI, I2C, RS232; GSM module, RF communication modules, Sensors (DHT11, BMP085, ultrasonic, IR, Hall Effect etc.), LCD module, Wi-Fi Communication, Zig bee, Bluetooth Low Energy, Robot prototyping Projects Prototyped and Tested: * Identity & Access Management * Smart Electricity Meter Monitoring * Home Automation * Smart Logistics * Environment Monitoring All projects have applications for remote access and control.
Harborlight Technology is an engineering service company specializing in the design and development of real-time embedded systems. Whether you are looking for a one-off prototype, firmware to drive your design, or a complete turnkey solution, we can specify, design, develop, and produce all or any part of the hardware and/or firmware to enhance your product line. With over 30 years experience in embedded development, we can provide you with innovative multidisciplinary solutions. Regardless of the technology base of your products (ultrasound, RF, infrared, electromechanical, optical, etc.), Harborlight can provide unique solutions to meet your needs. If you are a producer of military or medical products, Harborlight's experience in these markets ensures your product will be designed and developed to meet and exceed DOD or FDA standards. Whatever your embedded system needs, Harborlight has a solution to fit your budget and time frame.
More than 7 years of working experience in designing firmware, hardware and configuration software for PC. Worked in Kaunas University of Technology as embedded C developer with three projects: Medical syringe infusion pump rack. Static soil probe acquisition system. Digital input/output monitor/control over LAN. Worked in J. Navicko Company, designed: Distributed battery management system; Plug-in conversion kit for 2nd generation Toyota Prius. 1.5kW 36V DC motor controller for electric scooter; Universal CAN-USB,RS232,BLUETOOTH converter; Electric vehicle parameters monitor with CAN, 7" touchscreen, Linux and Qt. Android app for monitoring AC motor controller; PC and Windows CE applications for AC motor controller configuration and monitoring
Expert in fast turn around FPGA design and development with experience with all major manufacturers. Also expert in timely development of embedded systems. http://uk.linkedin.com/pub/jeremy-smith/40/906/5aa/
I provide expert electronic engineering design services. I emphasize in mixed signal embedded systems. I can provide schematic design, PCB layout, rapid prototyping, and firmware development. My experience includes low-cost embedded systems for data acquisition and consumer electronics. I am proficient with low-power RF, USB, AVR, PIC, ARM, MSP430 as well as many other associated technologies.
Embedded Systems Developer in a wide variety of applications . Particularly interested in real time applications running on multicore platforms and real time operating systems research and development. Always interested in embedded software design and development, data and network communication, UAV (Unmanned Aerial Vehicle) projects, robotics, as well as close interaction with the embedded devices manufacturers. Specialties Embedded Systems, Engineering, Real Time Operating Systems, Microcontrollers, Firmware, Drivers, Linux Environment, Programming, Debugging on Target MicroControllers: PowerPC: Freescale MPC5675K, MPC5604P, MC9S12X ARM: STM32F10x, STM32F20x, EMF32 Renesas M32192, ATMEGA1284p
Full development cycle of electronic devices: - analog and digital devices schematic design; - modeling and research different characteristics of designed equipment by simalation software; - synthesis of principal scheme and development of printed circuit board; - assembling, testing and final quality control of work prototypes; Experience with design of software algorithm for control systems. Experience with software development for embedded systems based on microcontrollers: - language: C, assembler; - hardware platforms: AVR (Atmel), C2000 (Texas Instruments), PIC (Microchip), FPGA: Acex, Cyclone (Altera); - PID-control implementation; - debugging and optimization of applications; - analog-to-digital conversion, data processing; - communication interfaces: SPI, UART/USART, CAN;
I have experience in Embedded System Design and Development. I also know some guys and companies who helped in manufacturing hardware Components.
More than 20 years experience in electronics and system design. FPGA design, VHDL, embedded programming, analog and digital circuit design, PCB design. Test and measurement system design. Doctorate in technical physics - lasers. Worked 3+ years in the USA in an industrial research facility as a senior engineer. Inventor of five USA patents.
? Embedded Systems Expert with over 10 years experience working with a Tier-1 semiconductor company. ? Experience in Embedded Software engineering with expertise in Wireless, GPS and Embedded Systems ? Proficient in C, Android Frameworks, RTOS, ARM, Embedded device drivers ? Hands on experience on ARM Cortex M0/ARM7/ARM9
We deal in all kind of embedded system design including Industrial Automation, Android and iPhone hardware/ software development, Microcontroller Interfacing using Microchip PIC, ARM, Arduino, Raspberry Pi platforms. We can provide you with cost effective solutions for your needs in minimum time. We have 15+ years experience in electronics solution provision so please contact with complete confidence.
Embedded Downloads provide embedded hardware and software solutions for electronic design projects and have extensive experience in PCB design, Schematic capture and design, Manufacturing instructions and test procedures, embedded processor design in C, assembler and C++. Development for linux based systems.
Had worked as Design Engineer from 2007 May to 2010 September (3.4 years Experience) involved in manufacturing of products like Finger Print based time and attendance unit, Smart Card Readers etc. High exposure to Hardware Designing using Micro Processors/ Micro Controllers and Hardware & Software Integration. Knowledge of testing all the PCB modules of all the Projects done using Hardware Test Equipments. Quick learner with good Organizing, Planning & Communication skills. Excellent Project Designing, Reverse Engineering and Strong Troubleshooting and Debugging skills Good experience in interacting effectively with on-site engineers, external Customers and technical experts