I am a full-time optical design consultant. I have over 20 years of practical experience in physics and optics, an MS Physics, and an MS Optics. My rate may be higher than some of the other freelancers, but I know what I'm doing, I have the right tools to move quickly, and my company is a legitimate U.S. business. I use Zemax OpticStudio Professional (currently licensed and supported). I have a small optical prototyping lab, as well as access to a much larger optical test facility. Specialties: lens design and tolerancing, laser beam propagation (single and multimode), stray light analysis, colorimetry, opto-mechanical system design and modeling with CAD import/export, polarization analysis, hologram modeling, GRIN media modeling, diffraction analysis, thin film coating modeling, modeling of complex sources and detectors, thermal analysis, and fiber coupling analysis.
-Fiber Optic Specialist, working in the field, presenting seminars, and consulting on fiber optic LAN, Telco, Utility, Education, and FTTH projects -Author of "Technician's Handbook of Fiber Optics", published by abc Teletraining, Inc. copyright 2000 ISBN 1-56016-073-X -Author of "Testing Optical Fiber with an OTDR" published by abcTeletraining, Inc. copyright 2000, ISBN 1-56016-075-6 -Created CD-ROM "Fiber Optics Troubleshooting" copyright 2005 -Written magazine article on fiber optics for "Mobile Radio Technology" Magazine, (and an article on car stereo installation for "Popular Electronics" magazine long ago) -Wrote and presented seminars on: "Introduction to Fiber Optic Technology for Telephone Technicians" "Fiber Optic Cable Path Restoration for Telephone Technicians" "Fiber Optic Testing and Troubleshooting" "Fiber Optic Splicer School" "LAN Fiber Optic Workshop -Field work (1990 to present) Fiber Optic Cable splicing, testing, termination, cable p
I am here to assist you in making high tech decisions. I utilize my practical hands on knowledge working with high technology and high tech companies, to assist you with; acquisition, design, production, and manufacturing of high technology products and processes. I can research and digest the techno-jargon into manageable information you can use. I am here to bridge the gap between you The Decision Maker. and the people you need to convey your message to. I can help you get the information you need.
?? Expert in optical systems engineering (low cost) ?? 22 years of lead engineering works in optics, medical laser, laser instruments, FO, M-O disk-drive, spectroscopy, LED, optics in biometry (iris) ?? Ability to develop innovative/ low cost design solutions of existing/ new optical products. ?? Bell Core reliability of FO components/ FDA radiological safety compliance. ?? Zemax expert in optical imaging/ LED illumination. Other areas: Invest foreign money in the USA to generate income for you, buy houses/ business for foreigners in the USA, find suitable low cost colleges for your children, be their contact person for their needs in the USA, etc.
Background in laser physics and fiber optics. Experience with design, building, and programming equipment for gathering of physical data.
OTN /ASON(ELECTRICAL&OPTICAL) /DWDM /NGWDM / SDH /PTN / MPLS /IP /UNIX /OPTICAL Domain Technical Professional
I am a dynamic Telecom Engineer with 10 years experience in routing, switching, WDM, DWDM, SDH/PDH and digital/analogue CATV systems. Most of my experience was gathered by designing and/or implementing large scale aerial and underground fiber optics and IP networks for the majors operators in Romania. I possess impeccable technical and computer skills with advanced knowledge in electronics and power electronics. My attention to detail and excellent problem-solving skills ensure that every project I work on is done accurately and to the highest possible standard. My verbal communication skills and positive attitude make me an effective communicator with all clients I work with.
Development and production of heads and optical components for optical systems read/write information. Development objectives for photo and video systems (test and metrology equipment, prototypes). Design of lighting systems based on LEDs and manufacturing. Support production, assembling and testing metrology equipment, prototypes.
Expert optical engineer with 28 years professional lens design, optical systems design and modeling, tolerancing, optical analysis, procurement, integration, alignment, test, characterization, and calibration of complex optical systems for aerospace, space science, commercial, and medical industries. Expert user of ZEMAX (up through current version ZEMAX 13) optical modeling and analysis software. Expert remote sensing professional with 20 years experience?proficient in all aspects of design, development, implementation, calibration, integration, test, and management for two dozen spaceflight scientific instruments, spacecraft, and space-borne observatories.
www.opticaldesign.eu: - Optical System Design: Concept, Modeling, Design, Documentation - Consulting - Coaching Professional Skills - Extensive knowledge of theory, design, and operation of optical and photonic devices - Expert proficiency in design of imaging devices (camera lenses, medical devices, zoom lenses, IR and UV imaging devices, lithographic optical systems) and corresponding mechanics, light sources and detectors - Good knowledge of CAD/CAM tools and components market - Attainments of assembling and testing CAD/CAM and various PC skills - Optical Design Software: Code V, Zemax, OSLO, LightTools, SYNOPSYS - Math software: MatLab, Mathematica, MathCAD - Mechanical Design Software: AutoCAD, SolidWorks, Pro/Engineer - Programming Skills: C++, Visual Basic, Visual Fortran, Web-design (HTML)
Dear Sir, I am C.Vimal Kumar BE 2008 passed out , I have 5years and 2months of work experience in telecom field lastly worked in Qatar FTTX project as ISP,OSP AND MIGRATION ENGINEER , have knowledge in FIBER OPTICS looking for job offer , kindly consider me if u have job opening and also I have attached my resume. I am eagerly looking forward to your reply . Regards, C.VIMAL KUMAR
A multi-faceted, detailed oriented and performance driven engineering officer with 4 years experience in the operation and maintenance of the optical fiber network. Bringing demonstrative leadership strengths and excellent analytical skills rooted in a diverse core value of integrity, teamwork, personal excellence, challenger spirit and customer focus.
I am Abdulrahman From Sudan but now I'm living in Saudi Arabia - Riyadh with my family
-30 years experience designing microprocessor controls, test systems, RF, analog, digital and fiber optic systems - building jet engine controllers for US missle defense (www.smart-1.us) - Completed a propulsion system analysis for Light Rail system (Dallas Rapid Transit in 2012) - 5 US patents in fiber optics -Designs include bomb disposal robots (Code of Silence), Oilfield controls, Verizon FIOS test systems, fiber optic inspection, telecom testers, & much more
Knowledge of fiber-optic communication systems, cables and standards. Talented, punctual, enjoy working
Experience in design and creating solid-state lasers, optical system for beam delivery, design of objective using Zemax software (skills in Sequental, Non-sequental mode, ZPL macros). Experience in using SolidWorks Simulation and Flow Simulations for modeling temperature and stress distributions in any optical elements.
I am a researcher and a lecturer, electronics subject with almost 10 years concrete experience in power electronics designing, simulating, consulting and building power electronics systems. I do optic fibre splicing, PLC programming, work with SCADA systems and in RF equipment and radio engineering systems. Right now, I am leading a team which is busy with Solar powered electronic table USB charger project for the Energy and Renewable energy projects for the Centre of Excellence: Alternative Energy, Southern Gauteng Science & Technology Park (VUT Sebokeng Campus).
I have more than twelve years designing experience in Industrial Communication Device and Automation of power systems. I am proficient in digital/analog design and have a large number of real-world experience in developing Embedded system(Powerpc/Arm/Dsp). I can take a job from design to manufacturing prototype.
?An entrepreneurial optical engineer experienced with design, testing, marketing, and manufacture of value added product solutions for the consumer and defense marketplace?
Over 30 years experience in Natural Gas Industry designing Control Systems and SCADA applications.
I am a technician in telecommunication, construction on the area of optical fiber networks in cities, companies, antennas and railways. Specializing in fiber optic fusion and OTDR testing and Power Meter (exfor, JDSU) for correction and reflectance values, technical support, prevention, with an experience of over 8 years in telecommunications and always work with major companies Portugal, I have training GPON (networking ftth Portugal Telecom, ftth sonaecom, vodafone, zon, ARTelecom). Also training for work at height for confined spaces, first aid, basic life support (BLS), And I had the privilege of belonging to the group of professionals who participated in some important projects in Portugal with such, the beginning of FTTH pilot project, the optical fiber ring that connects the entire country, making retund?ncia, Digital Cities.
An experienced test and commissioning technician in the fiber optic field of telecommunications. I have over 35years of experience in the telecommunications field, so I can bring a wide and extensive knowledge of communications. For the last 18years I have sub contracted to Alcatel-Lucent to install, test and commission their submarine systems at the land terminal stations including NOC's. the various systems that I was involved with the commissioning and implementation were AAG, IMEWE Lion Falcon, Apollo, Med Nautilus,southern cross, and many others
Interest In Cisco inter-networking | 4 Years Experience of Inter-networking/ Data communication/ Optical Fiber transmission | Projects of MetroEthernet and Optical Fiber Network Upgrade.
i am project director in the field of FTTX project and have good experience in the design and execution of the out side plant projects for fiber and copper networks. in addition to have big idea about the projects coordination in different countries.
Optical Subject Matter Expert versed in all aspects of system configuration, design, deployment and lab testing of Optical Transport platforms including Ciena Corestream, Coredirector, Sycamore SN16000 ODXC, Nortel 3500/6500, Cisco 15454 and numerous others. In addition, Linux system adminstrator specializing in Debian based distributions, but familiar with all Posix operating systems including Unix variants Solaris, and HPUX.
A highly qualified group of experts in different technological areas as Hardware and Software development, Telecommunications, Optics, Web-based Apps, Robotics and Green Energies. We, together have more than 50 years experience working with national and international companies at the Design, Manufacturing and Quality areas. We have great relationship with national and international Academic/Development and Research Institutions as well as high interaction with highly qualified professionals. Because all of these, we are sure that we can provide you with a high quality service at a convenient cost. We are the real solution to your engineering, development, manufacturing, design problems.
Specialties: Design and development of Passive Optical Components specifically Fused Biconically Tapered Couplers -WDM and Tap type -Singlemode, Multimode and special type optical fibers -Development of other Fused Biconically Tapered Optical Fibers based products such as Pump Combiner and Mode Conditioning Patchcords -Fiber structure modification such as mode field adaptation (TEC tapering and fattening) and fiber end lensing and wedging Knowledgeable on FMEA, 8D, DOE, and SPC. Can establish Bill of Operation and Bill of Material for new product requirements.
I am a 52 years old, And I have worked in the electronic field, the environmental controls field, the heavy industrial electrical and instrument and controls field, the primary auto manufacturing robotics and CNC field, the high voltage electrical field, and the process automation water and waste water controls field. I have an associates degree in mechanical engineering, with enfaces on pneumatics and hydraulics. I have over 26 years of experience in the listed technical disciplines. I am a menber of the ISA with a CCST.
RF In-building solutions engineer/project manager. Has designed and commissioned wireless services in every kind of structure possible: Class A office space, Automobile tunnels, Railway/subway tunnels, nuclear reactors, shopping malls, US federal government buildings. Has designed and commissioned multi-service antenna distribution systems for VHF, UHF, SMR 800, iDEN, Cellular, PCS and AWS services. Has used fiber-optic technology almost 20 years. Can legally work in both USA and Canada.
I develop Fiber Optics Intruments: OTDR, Power Meter, CWDM Analyzer, PON-testers etc. The devices are easy to use and reliable. They are well-known in Russia, Ukrain, Belorussia and Kazakhstan. I am usually working in different roles: develop, support, managment, programming, delivery lection etc. My area of interest: fiber-optics instruments, measurement, designing of PCB, programming Embedded System (MCU, FPGA, DSP) - everything what is connected with creating new electronics devices. My slogan: DO any job perfect!
Expierence in opto-electronics, optical imaging, optical sensing and wireless sensor networks. Over 7 years of experience in micro-optical design using ray-tracing software (OSLO, ZEMAX). Lead several projects from problem identification with client to presentation of first prototype. Granted six US patents in optical design and optical communications.
B.S., M.S. and Ph.D. in Electrical Engineering. Research and Development in the areas of: o Semiconductor physics, Solar technologies, Optical networking technologies, Optical sensors, Nanotechnology and MEMs Devices, Telecommunication technologies, Information Assurance Product Management/ Business Development o Developed Marketing Requirements Documents for cellular phones, information assurance systems and optical networking test instruments o Generated market analysis, competitive analysis and roadmaps for Gate Reviews, proposals and product development o Performed pre/post sales product demonstrations and marketing/product presentations o Identified new markets and new technologies Management: o Managed the research design and development of a cellular phone, medical monitoring device, Chromatic Dispersion and Polarization Mode Dispersion test instrument for optical fiber, Optical Sensors, Optical Component design, beacon radar system, low cost surface movement radar
I am looking for a challenging opportunity in the Engineering or Electronic test technician role. I have over 10 years experience in R&D working beside Test engineering in developing and characterizing parts to production. I also troubleshoot test boards to component level using test equipment. Ran the test lab for Engineering. From ordering components needed for builds of test fixtures to maintenance and diagnostic test on LTX and Roos testers.
certified from BSNL on Optical Fiber Communication Engineer. worked on SDH, PDH, DWDM
Because of my perfection in those domain of work and timing contribution.Focused on fiber optics data transmission,Thank you.
FDTD modeling polarization diffraction gratings, self phase modulation of few cycle duration laser pulses, difference and summary frequency radiation generation by few-cycle duration laser pulses, soliton propagation, numerical simulations, femtosecond laser pulse non resonant interaction with matter, nonlinear fiber optics, numerical methods applications, theoretical investigations and simulations, analog and mixed circuit design, digital signal processing. Tools: MATLAB, MathCad, HSPICE, C.
Over 08 years of experience, career oriented professional having very good communication skills (Automation and Instrument Engineer) with a degree in Engineering (department of Electrical Engineering) based upon Control Systems and strengthen by Research, Industrial Instrumentation and Automation experience. I am seeking a job in a reputed engineering organization where I can apply my engineering skills to improve my knowledge area. Also have the experience of working with Multi National and Multi Cultural professionals.
I have 10years experience in network cabling fields structured cabling and telecommunication, I know the fusion splicing, mechanical splicing and hand termination for the various type of fiber optic cables I have well experience for using testing equipment like splicing machines, OTDR, power meter, lacer light source and fluke land cable tester etc I looking for next job after I finish my contract in Asap.I hope that above my said knowledge, so you will give me a better chance to prove myself as skilled technician thanks best regards.
An outgoing and upbeat individual with a passion for welcoming and solving problems. A good team player with a people management and organizational skills. My goal is to create satisfaction both for the client and the organization in turn.
I am a Veteran Silicon Valley Laser Engineer of 26 years with a passion for excellence and detail in designing solutions for laser and optical systems. My career has spanned working as an individual contributor, supervisory contributor and engineering department manager. Mechanical design experience from the deep infrared to x-rays. Fiber optics through free-space systems. Semiconductor applications through telecommunications, aerospace and industrial applications. Designs range from individual parts to whole systems and overseeing multimillion dollar integration projects.
-Embedded Circuit design using PIC microcontrollers -PIC microcontroller firmware development -Printed Circuit Board layout using EAGLE PCB layout software -PCB prototyping using LPKF CNC milling machines -Soldering rework and assembly experience with fine pitch SMT parts (QFN, SOIC, TQFP) -Serial Coms, UART, I2C Coms, IR Coms, PWM, A/D -Stepper Motors, Servos -Lantronix serial to ethernet modules -AVAGO Fiber Optic RX/TX units -Serial to USB FTDI ICs, Matrix Orbital Touch Screen LCDs, SiLabs FM Radio ICs, 16F and 18F PICs -Oscilloscopes, DVMs, Power Supplies, Vector Network Analyzers, Spectrum Analyzers -Manually operated milling machines for making enclosures -Experience with high voltage capacitors and power supplies -MATLAB -EMI Sheilding Techniques -5W LEDs -BUCK LED Drivers
I am Shuaib i am 24 yeard old and i am Associate Engineer in Electronics i am doing job in Optical Fiber FFTH GPON in ETISALAT UAE.. i have 5 years Experience in FTTH BPON and GPON
To apply my expertise in photonics, fiber optics and RF in the research and product development of advanced optical networking projects. I am very interested in solving challenging optics problems and the full characterization of optical systems, subsystems and components
I can do any job from softskills, clerical jobs, survey jobs and engineering jobs.
Extensive experience in design and development of variety of laser and laser emission fiber optics delivery systems for medical and industrial application, Ph.D (Laser Physics), MS (Thermal Physics).
A physicist with high level understanding of Electronics and Fiber Optics in addition to Geophysics. We offer high end writing terminal papers in Engineering and Physical Sciences.
Hi. I'm an engineer designer. I'm developing projects in areas: fiber optic lines, structured cabling systems. I also digitizes drawings in dwg format. Drawings were made in AutoCAD or Visio. I will provide high quality work at a reasonable price and always on time.
I have done my graduation from top ranked university of Pakistan in Electrical Engineering. I am perfect in Electrical Electronics designing, Calculus and Physics etc related subject.
Detail oriented Telecom Engineer,strong educational background in Telecommunication & Networks, supported by field research and professional work experience in Telecom core networks & IT.
I am a post graduate in photonics and device micro fabrication and electronics & communication engineer. With three years of industrial experience in fibre optic communication as a solution manager -Fibre & FTTx with Ericsson India. Currently working on high power laser material processing with hand on experience in clean room , photonic device fabrication. My master's thesis was on dry etching and electrical analysis of AlGaN epitaxial layers for finding their novel application as a transparent cathodes for OLED's. Actively looking for a job in photonics and optical fibers.
CCNA trained,with extensive hands on experience in handling sdh/pdh ,mw/optical fiber equipments and maintenance and remote monitoring and configuration changes using TNMS and radio equipment installation,commissioning and integration experience of over 3 years.
Very skillfull on hardware design include analog circuit, RF circuit, high speed circuit, fiber optic circuit, etc.
I am by Profession Electrical Engineer (Specialization in Telecommunication Networks) having ""4 years"" of strong professional Experience in Telecommunication industry. Specialties: A good experience of RF, WiMax, VSAT,Transmission Fiber/GPON and IP Networks. Capable of performing optimization and planning of the network. My Major Specialties and Hands on Experience on the following technologies as given below :- 1) Radio Frequency Networks (Point to Point & Point to multipoint) 2) Wimax Networks (Fixed wimax Base stations and CPE's) 3) VSAT Networks 4) Microwave Transmission Networks 5) Fiber Optical GPON Networks 6) DSL Networks 7) IP Networks
I started working as an electrical engineer since 1997. I have started design for medical and military thermal (infrared) camera systems. My experience extends to digital, analog, mixed circuit designs, sensors, PCB layout, RF design, Fiber optics and also Firmware and VHDL. I can multi task with various responsibilities from software development and electro-optical engineering to project management and supervision of team members.
A young talented, innovative Guy, and my field of interest is from the field of Telecommunication to Embedded electronics VSAT Installation and commissioning Gannetcity, Marine VSAT(motorized VSAT) EPAK products Germany with Daniel, Fiber Optics Training...on going >>>Data Acquisition Systems >>>Home Automation/Control via ISP,GPRS, Interactive Voice Responder System >>>Autonomous Ground Vehicle System, Highly-configurable Tele-Operated Ground Vehicle Systems For Surveillance and Perimeter Patrol >>>Educational Robotics Kits, Electronic Learning Kits, Electronic Audio/Visual Teaching aids, Assisted mobility systems, Electronic Walking Stick for the hearing-impaired, Electronic Wheel chair with automated navigation system, GPS Waypoint Navigations for pedestrian navigation. >>>Browser-accessible user front-end for remote data logging portals over WLAN, Browser-enabled RTU automation accessible over GPRS >>>Microwave Security Systems, Smart Card Access control Systems, Print-On-Ch
Extensive experience in international and domestic field of Telecommunications, Civil Engineering, Project Management, RF design, optimization and planning of wind turbine including submarine electrical and optical fibre cables. Willing to travel and be relocated.
Talented professional with 13 years of progressive accomplishments leading Project Planning & Design, Technical evaluation, Project implementation & O&M services, support, delivery and project management. I worked major on Broadband Optical Fibre (Fixed Networks) SDH Installation, Fibre backbone implementation for WLL (Wireless Local Loop) network, OSP/OFC ODN design & implementation & FTTB, FTTP, FTTC, FTTH-x/GPON Project Completion. I have expertise to develop and analyse engineering projects, planning & development of Optical Fibre Infrastructure for Metro & Long haul OFC network, Ensures the quality of GIS maps data to include geographic information and content accuracy. To interface with the Client and provide reports and information as directed by the Project Manager/Director
Ph.D. in Materials Science & Engineering from Penn State University. I specialize in Raman & IR spectroscopy, electron microscopy (SEM), & optical microscopy to characterize organic materials, polymers and polymer composites, and glass. Relevant Experience: - CAD to design custom fixtures for my experiments - Spectral assignments (Raman & IR) of organic and polymeric membranes - OriginLab to prepare Graphs and Figures for peer reviewed journals - Quantitative imaging using ImageJ - Determining process analytical techniques for manufacturing processes
Experienced hardware design engineer, 20 plus years in the hardware design industry including high speed logic design for both ASIC and FPGA implementation, digital circuit and PCB design and system wide architecture design and implementation.
I'm Electronic Engineer interested particularly in Robotics and Automation. I also did a Master in Italy in Optical Communications and Photonic Technologies. I have a solid experience in microcontrollers programming, circuit simulation and design with several CAD tools.
Telecommunication Professional with more than 3 years experience in: Planning, Implementation & Maintenance of FTTx, and Optical Transmission Networks. Planning, Implementation & Maintenance of OSP & ISP Infrastructure. FTTx (Passive) Network planning, costing, deployment and operations. Project Management. CCTV Projects Planning & Designing and Execution . Bachelor of science degree in Electronics & Communication Engineering from the faculty of Engineering , University of Kalamoon , Dair Atiah , Damascus Countryside , Syria . Member of the Syndicate of Syrian Engineers , Homs Branch. Excellent knowledge of contemporary communication practice and service. Ability to interact constructively with members of a culturally diverse work environment. Demonstrated ability to learn new concepts , easily adapt to change and manage multiple simultaneous tasks . Speak English (Fluent) , Arabic (native) and Spanish (basic) .
Experienced Civil Engineer with a diverse portfolio including Utility Projects (Waste water and Clean Water), Highway design alignments and drainage, housing estate road and drainage, Business parks, Industrial parks, schools, hospitals and ports. Product Manager experience in Fibre optics.
5 Years optical communication production hardware design.
I have always said that the right Telecommunications professional can provide the vision, expertise, and decisive leadership to help guide an organization to achieve significant bottom-line growth. As a seasoned professional in this field, I possess advanced knowledge of telecommunication technologies, I have proven management abilities, and a high level of tenacity
Experienced Optical Engineer with 25 US patents.
An Electronics / Electrical Engineer, experienced in Fibre Optics, Training & QA. A lateral thinker & problem solver resulting in 3 Patents. Worked in Product Design, Research, Telecoms, FO Cable production & test, Calibration, Technical Writing esp training courses. Strong on multi-diciplinary science, physics, mechanics, chemistry.
Electrical / Electronic Engineer with a M.S. in Electronics Technology and 20+ years experience in design and development of digital, analog, microprocessor, and FPGA based circuits. In-depth knowledge of developing programmable logic elements to support: graphics processing, video electronics, stepper motors, DC/DC, LCD, LED, and other display technologies in instrumentation and body controls. Expert skills in C, Handel-C. Highly qualified in design drivers and controllers for stepper motors, RGB LED indication, analog, and digital sensors. Knowledgeable in all aspects of integration of electronics, software, optics, and mechanical components into a single product. Extensive experience with byte data link controllers RS-232, RS-485, USB, CAN, BIN, J1850, MOST. Theoretical and practical design and fabrication of electronic circuits / systems containing discrete RF, passive, digital, analog, microcontroller, mechanical, and optic components.
Have working experience in R&D, space industry and digital consumer industry. Experienced and skill in lens design for camera module, telescope design for satellites camera and waveguide design in optical communication. Hand on skill in waveguide fabrication, fiber optics to waveguide coupling, optical metrology test and lens MTF test. Always demonstrate can do attitude to overcome the challenge in daily task, has strong analytical and problem solving skill to support IQA, NPI and production team on the lens related and camera performance issue. Specialties: Optical design tool: Zemax (sequential and non sequential), LightTools Programming: Matlab, VBA Mechanical drawing: Pro/Engineer Lens MTF test: Trioptics Pro4, UMA DSC501 Photonics-waveguide design tools: WDM phase, OptiBPM
I am a hardware engineer - with a liking for product development and system design. I have around 15 yrs of telecom experience spanning - wired, optical and wireless portfolio. I work well with cross functional teams ( firmware, application software, mechanical, thermal) to realize a system or parts of system. I have experience in control and automation, analogue electronics, high speed design, defining system architecture and a flair for product development. I also do like sustenance engineering and re-design for optimized product. enhancement. take responsibility to render a success for projects.
Laser and electro optical engineer
HR5 Consulting, LLC We provide quality work, but unlike other providers, we guarantee our work, if you are not satisfied in any way, we will return your money, no questions asked, no hassle, and I mean it! Provider of Licensed (Arizona, USA) Professional Engineering Services. Owner and manager, John Hiett, holds a Master of Science & Bachelor of Science Degrees in Electrical Engineering -- Owner's Background and Experience -- Electronics, Electrical (High, Medium, & Low Voltage), Systems, Analysis, Software, Hardware, Forensics, Medical, Aeronautical, Aerospace, Robotics. Intellectual Property Analysis, Prior Art Searches, Patent Drawings Avionics: RTCA DO-160E, DO-254, DO-178, ARINC 744A-1 Hardware: Flight Deck Printing Systems (Honeywell/Boeing), Embedded Systems Software: RTOS VxWorks, C/C++, Basic, XML, HTML, Windows OS, Linux, MFC, Basic Project Management, Engineering Coordination
Join the opportunities to grow up, find a challenging position to meet my competencies ,capabilities, skills, education and experience
I have a variety of skills and can provide quality help at an affordable rate.
My goal is to secure a challenging position that will utilize my extensive technical kills which will lead me to innovative work environment and contribute organisation effectiveness through emphasis on efficient utilization of technical knowledge experience skill to enhance my job. I love to face challenges,i say my hunger for learning and success,increase with every success and with every failure even more. I think in a positive way.
i am telecommunication engineer and i am looking for a job . i am hard worker
A quick learning, self motivated Process Engineering Controls Technician. Offering organizational and leadership qualities relating to the Automotive and Controls field. These skills will be utilized in order to complete tasks efficiently from beginning to end .
? Tenured, well trained, and highly motivated Master Systems Technician offering a strong academic and professional background in IT and Electronics combined with an excellent Business acumen. ? Consistently recognized for technical troubleshooting skills used to rapidly and cost-effectively resolve challenging technical issues. ? Quick study with a passion for new technology; equally successful in both team and self-directed settings; and proficient in a range of IT and Electronics systems, software, tools and testing methodologies
Lighting designer using dialux, Autocad
The Engineering Services Nicotra (SIN) provides technical services primarily in the design, consultancy, project, energy and safety management and start-up of electrical and mechanical systems. In particular SIN is specialized in the field of electrical installations of High and Medium Voltage, in the field of industrial automation, energy conservation and cogeneration. SIN is also involved, feasibility studies, management of work, reliability of electrical systems, safety at construction sites and places of work.
I have good skills & know how to handle the clients.
I am a B.Tech (ECE) from the prestigious Punjab Technical University and have been certified as a Network Engineer (CCNA) by Cisco, USA and as a MCP, by Microsoft, USA. I believe that my qualifications, along with my drive and enthusiasm, make me an excellent candidate for employment. I have secured above 60% throughout my educational journey. My proficiency in English, as well as my knowledge of Networking, working with the Windows OS and MS Office, complement my qualifications.
We form a group of young talents which you can believe upon. Started with college projects, and kicked off with our own unique ideas and products. We are here to extend our support to a wide range of organizations in Electrical, Electronics and IT field. Low Cost...Quick Delivery ...Valuable Support...!!!
The majority of my career has involved design of innovation micro processor embedded applications, software development, FPGA, PCB design with CAD tools, signal integrity, Analog Circuits, power supply with cost and quality requirements. I have experience with Intel and Freescale processors, Altera FPGAs, root cause debugging and analysis, prototype building, debugging, reverence engineering and design for manufacture and test. Also, I have the ability to take a product from specifications to design completion and cradle to grave in manufacturing. I have also directed the design of PCBs with up to 18 layers that included analog, digital and RF components. I have been the team lead in digital / analog interface design that have consisted of 3 to 4 other engineers and coordination of the develop effort.
I am eager to work as Project coordinator and PMO with any organization. I have 15 years Telecommunication Experience in different Capacities including PTCL Transmission, NOC Engineer on Wateen WiMax project, PTCL and Huawei Project. Work on Radio Commander Portal, M2000, Opex Cost Management System (OCMS), High Cap and PEMS (Motorola). Reporting of incidents on daily basis to Custome and higher ups. Highlight the network visibility issues and work in coordination with level-2 teams to ensure maximum network visibility. Assisting General Manager Transmission Network Zone as a coordinator to keep up to date record of Transmission (SDH) media and issuing the feasibility of SDH Transmission media to sub offices according to the requirement of Corporate Client. Preparing and analysis of Reports received from the Customer and highlights the issues to the Management and Field Team. 12 years of work Experience in Operation Maintenance of PDH SDH (ADM) Transmission equipment. Good k
20 years experience in bringing new technology products to market. Consumer electronics, wireless and communications background. Market analysis, business planning, product definition, manufacturing and product sourcing. Strong connections in Asia.
A web designer
Hello, I posted myself on Elance for side projects. I have rather extensive experience in both automotive and the utility industry (nuclear). I've developed everything from large scale Proportional Integral turbine control systems robbing General Electric of millions in sales, to simple sequencers cycling equipment trains. I'm also very skilled and certified in various computer networking technologies. There isn't much I can't or haven't done. I'd consider my specialty is in SCADA systems. I work full time and have a wonderful job however, I always keep my options open to taking on interesting side projects.
I am an Electronic engineer. Currently working in electronic based company.
Very "Semiconductor's Industry oriented", I have the feeling I may fit to majority of other criterias (Technical knowledges for a better understanding of Industry' requirements, European and France Disty Manager as I already did it in the past, OEM's approach, Sales & Marketing minded, P&L, ROI, Turn Over, HR and CRM management,...) and as since a couple of years I'm now much more Sales/Mktg and Customer' Management oriented (Key accounts and Distributors/Retailers). Since 25 years now, I've roughtly been in deep touch with all industy' domains from small Mass Market customers up top internantional OEMs.
A Telecom Engineer with 3 years experience in Operations and Maintenance in a Mobile Communication Provider. A deliver-oriented person, with expereince in integration, commisioning and monitors complex telecommunications networks and associated equipments, provides technical advice and information, and identifies complex problems and initiates actions to resolve them
my specialty is data communications and communication system. Data Comm, consists such as leased lines, and any kinds virtual private networks. I am a field engineer of the most known telephone company in the Philippines..
3 years work experience in electronics design and MATLAB
Over 6 years of regular and part-time work experience in IT spread over a variety of technological domains. AN accomplished professional in implementing, configuring and integrating a wide variety of systems by using my experience in the area of software development and IT Infrastructure management.
A electronic engineer with sound knowledge of Computer hardware & Sesmic electronic. verry good in preparation tecnical manuals tecnical write up.
We offer administration and installation services (on site in our area or with remote administration tools) for Microsoft based and hybrid networks. Our expertise include: - Windows servers including clustering - Exchange Server - ISA Server - SMS Server (especialy combyned with Compaq/HP Insight Manager) - VPNs based on ISA Server - VPNs based on Cisco boxes - Cisco devices configuration
Recent grad with experience working with analog and digital components. Familiar with C,C++,C#, and assembly. I've worked with Zigbee wireless protocols and have some knowledge of control systems and DSP.
Give me Opportunity It will clearly define you
I am a guy with good logical and analytical skills.I like to work at anytime.I am self starter and interested in learning new things.I like to solve problems in a different way.