Freelancers by Skills

10901-11000 of 19839 Professionals

Experienced project & product design engineer of all types of consumer goods

United States, RI, Coventry | Engineering & Manufacturing | Rating 0.0 (0 reviews)
mechanical engineer

CAD Professional skills in Structural Design(9+years) Construction and Drafting Services for Industrial Design Experienced with creating, analyse and presentation of 3D models.

Romania, galati, galati | Engineering & Manufacturing | Rating 5.0 (1 reviews)

I have a degree in Mechanical Engineering with a specialization in thermal science. I have five years experience working in the boiler pressure vessel construction and repair industry. I have worked closely with various construction specifications including AISC, ASME, Section I,II,VII, and IX of the BPV code as well as the current NBIC. I am familiar with AutoCAD, Autodesk Inventor with FEA as well as Design Calcs pressure vessel design software.

United States, GA, Ringgold | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am B.E. Mechanical Engineer affiliated from mumbai university and done PG Diploma in Mechanical Design of Process Equipment from Suvidya Institute of Technology,Mumbai.

India, Maharashtra, Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Certified specialist in mechanical engineering, Moscow State Technical University named after Bauman. I am a specialist in the design of new structures, the calculations for strength and dynamics. Perform at the highest level of 3D models and drawings of all structures. In the process of work is always open to dialogue and constructive comments.

Russia, Moscow, Moscow | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a mechanical engineer and have excellent skills in Autocad, SolidWorks and 3d design. I can give you the treatment and quality of a company in the price of freelancer. Creative and able to provide solutions. My main goal is to offer a total satisfaction guarantee.

Spain, Spain, Albacete | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a Professional Engineer in 6 states. I specialize in commercial and residential site design.

United States, GA, Holly Springs | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I worked on various projects in the past 20 years. From simple PCB's to very complex 8 layer boards with high speed digital signals. I am skilled in prototyping so the customers can get from me everything - from an idea to the final working product. I can offer ideas for the project, schematic design, PCB design, acquiring the components, producing the prototype... Everything in one place. For prototyping purposes I can solder everything by hand from the smallest 0201 components to the highly complex BGA integrated circuits.

Croatia (Hrvatska), Zagreb, Zagreb | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert ProEngineer designer

J am a mechanical engineer master degree.J have a lot of experience (15 Years) in 3d design of machine,sheet metal,sheet metal tools,metal construction,metal buildings...J work in Proengineer-Creo professionally but I have a very good results when J work in autocad,and solid work

Serbia, Vojvodina, Novi sad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
inventing&drawing machine

We / / work SolidWorks and Auto CAD. We have done: -tools / equipment / machinery for milk and cheese We use the controllers, software, pneumatics, hydraulics, mechanics. I have extensive experience / more than 30 years / mechanical works I'm not a virtual designer, practical - Prototyping and Production I can do it manually 3D drawings, then Auto CAD and Solid Works

Bulgaria, Varna, Dobrich | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electronic Expert

5 years experience in electronic circuit designs

Macedonia, Skopje, Skopje | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3D design, SolidWorks. 30+yrs exp. Friendly

This small family business is friendly and down to earth, we take a common sense approach to helping you with your 3D modeling needs, and give you personal attention. Utilizing SolidWorks software, we can take your 2D drawing and make a 3D model or assembly, help you design from scratch, or troubleshoot an existing project. We have an in-house machine shop for building and testing prototypes before you go into production. We have over 45 years of real world experience, not just computer drafting, but building what we draw so we know how to make things work.

United States, CO, littleton | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a Telecommmunication Engineer and I am involved in designing project prototypes. I have worked with Arduino and minicomputers such as Raspberry Pi. I do PCB design too and electronic design. I have undertaken projects such as Radio frequency programming.

Kenya, Nairobi, Nairobi | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Control Systems & App Engineer, PHP Developer

A very competent and practical Engineer specialising in Control Systems and Application Engineering, with experience across a broad range of industries including mining, maritime and commercial. Has a proven track record of providing sound control systems support and Engineering, and also adding value to an automation/energy management product portfolio. Extensive experience using a diverse range of PLC???s, SCADA and HMI software packages, and advanced technical support. Is able to adapt and quickly learn technologies and software packages. Excellent written and verbal communication skills acquired liaising with clients and site work, as well as working with managers, tradesman and other engineers

Australia, Queensland, Holland Park | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Electrical and Electronics

I am an Electrical Engineer with experience of three years with skills in C++,Embedded systems,Circuit design and Electrical energy systems.I can use Matlab,Circuit maker,Proteus and multisim to design and simulate.

Kenya, NAIROBI, NAIROBI | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Mechanical design engineer

Spain, Catalu?a, Barcelona | Engineering & Manufacturing | Rating 0.0 (0 reviews)
BIM, AutoCAD, Revit Experts

Aspire Consulting Services India is a CAD drawing, drafting, designing and paper to cad conversion service provider from India. With the advancement and vast adaptability of BIM technology, there has been a great need in the industry for experts who have exposure in Revit Architecture, Revit Structures and Revit Mechanical, along with the full skill set of assisting the client with their BIM needs. Outsource AutoCAD Drafting even offers BIM (Building Information Modeling) Services to building engineering and construction sectors holding on to current construction project requirements.

India, Maharashtra, , Aurangabad, | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Get solved your MATHE, & Electrical Engg Problems

I am an electrical engineer working in a university for almost two years. I have taught the courses of CIRCUIT ANALYSIS, ANALOG ELECTRONICS, DIGITAL DESIGN, and currently teaching CONTROL SYSTEMS ANALYSIS AND DESIGN. I have researched in the area of wind energy. This was my graduation research project, we designed a prototype windmill and made power output analysis in the environment of Karachi. My Skills List indicates the areas I worked in, or do have strong interest. Currently I am doing a research thesis in the controller design for motor speed control. As I am strongly interested in the field of Automatic Control Systems, I will continue my explorations in this area. Partly I teach mathematics to college and university students. I have taught Pure Mathematics to the students of Cambridge O-Level and A-Level. I have taught Calculus, Linear Algebra, Differential Equations, to university students. So I can also guide the students of Mathematics.

Pakistan, Punjab, Lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Software development

Long time I have experience in design support and repair electronics devices. Now I have self business. I can design microcontroller devices and related PC software.

Ukraine, Odesskaya, Reni | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Design & Presentation

I can do jobs related to architectural design & presentations of most of types of buildings. I am fluent in english & arabic.

Egypt, giza, giza | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Quick and Competent Design Services

Full design services, from concept, to archetecture, to design, to prototype, to production. Skill set ranges from high speed digital, to power systems (board and system level), analog design, CPLD/FPGA design, and microcontroller coding.

United States, IL, St. Charles | Engineering & Manufacturing | Rating 0.0 (0 reviews)
SolidWorks Expert

My career has been split between product development and machine design. On the product development side I have worked in the consumer electronics and commercial vehicle industries. My machine design experience includes building custom automated assembly equipment for a wide range of industries. Throughout my career I have used SolidWorks for design and analysis.

United States, TN, Nashville | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Hard working, consistant, dedicated

Graduated electrical engineer, currently on master studies. Excellent knowledge in digital electronics, using VHDL, Matlab, programming microcontrollers (asm and C, msp430, pic, atmel) and analog electronics. Using Protel, Proteus and Orcad for PCB design. Also good knowledge of 3DSMax, Photoshop and Corel.

Serbia, null, Pancevo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Senior RF and power control engineer

I have worked for aerospace companies and commercial subsidiaries for 30 years as an electrical engineer. My experience includes design, development, integration, and test of products involving RF/microwave, motor control/power control and more. I've worked on projects from DC to 100 GHz on the circuit, module, and system levels. Excellent troubleshooting skills.

United States, CA, Torrance | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Sean Smith

Studied aerospace engineering at Iowa State University, have practiced being a wind blade engineer for fiberglass wind blades. I have experience setting up manufacturing processes for the infusion of 40m long wind blades.

United States, CA, Imperial Beach | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced architect and interior designer

Experienced architect and interior designer. Built up over 250 private residential houses. Creating buildings with individuality and charm that meets each clients expectations. Working free in modern and classical styles.

Russia, Moscow, Moscow | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD Drafter / Designer

CAD Drafter/Designer

Mexico, CA, Pomona | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Embedded Systems Applications, PCB Designing

Pakistan, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Experience working with drafting techniques and standards. Experience working with CAD hardware and software. Experience working with engineering design, principles and procedures. Instructed and taught courses in development of 3D assemblies, models and 2D drawings of moderate complexity using AutoCAD, Pro/E and SolidWorks. Created documentation, presentations and lecture notes to present to students the use of and features of AutoCAD and SolidWorks.

United States, CA, San Diego | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have more than 10 years experience in Embedded System Design and also worked on safety critical system. I have also designed the many types of automatic testing tool for production and LAB environments. I have very good skill in c and assembly language. You can use my skills to build the robust embedded systems for any domain. Thanks

Pakistan, punjab, lahore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Design & Development & Quality Engineer

This is a Design & Quality who dealing in New Product development and Quality assurance and quality control document . Also providing consultancy for ISO certificate like:- ISO TS 16949 , 14001......ETC)

India, RAJASTHAN, JAIPUR | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Over 10 years in mechanical design. Aerospace mechanical systems. Automation and prototype design and engineering.

United States, AR, Conway | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Project Manager with over than 12 years of experience completing projects on time with excellent analytical, communication, and presentation abilities. Solid knowledge of building codes IBC, CBC, UBC, LABC and ASCE. Strong design capability of various materials: steel, concrete, masonry, wood, and composites Strong background in managing and planning projects simultaneously within given deadlines Exceptional leadership and organizational skills

United States, TX, Houston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Go From 2 Do, 2 Done

Experience in designing and implementing a variety of processes that improved quality and productivity. Media, Entertainment and Autodesk 3ds Max.

United States, MI, Southfield | Engineering & Manufacturing | Rating 0.0 (0 reviews)
FPGA Design Engineer

20+ years FPGA design and programming using VHDL and verilog for Xilinx, Altera, and Actel devices.

United States, WA, Seattle | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Integrated Circuit Design

My unique mix of previous work experience, my Masters in Integrated Circuit Design from TU Munich and NTU, Singapore and my current research experience as PhD researcher in IC design at KULeuven, Belgium make me a suitable . I have a work experience of two years, as a Senior Design Engineer in new medical diagnostic equipment design & development as well as Embedded Software design & development at D&D, Larsen & Toubro Limited, India. Patents: 1. " Time and workload dependent circuit simulation (EP 2509011 A1)" in European Patent office 2. ?Auto debugging system for patient monitoring system (755/CHE/2009)? in Indian Patent office. 3. "Temperature control and protection in patient monitoring systems? in Indian Patent office.

India, West Bengal, Bankura | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Pharmacy, Brand Management,Designing,Advertisement

We at ArmyAnts communication design,manage,advertise your pharmaceutical products for you. Having professional designers and personnel working in pharmaceutical industry for the past 4 years we have practical knowledge about the Job. Our staff is responsible and always present to communicate personally to respond to any queries related to jobs.

India, Maharashtra, Navi Mumbai | Engineering & Manufacturing | Rating 0.0 (0 reviews)
HVAC engineer/CAD designer

Over the last 15 years I have worked on a wide range of HVAC projects. I have University Master degree in Heating/Cooling and Ventilation engineering. I believe I can help you in designing on plans, schemes, conversion on rough sketches in AutoCAD drawings and sizing ducts, ventilation grilles, pipes and ect.

Bulgaria, Sofia, Sofia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced engineer with CAD.

Engineer with 8 years of experience in consumer products and appliances. Knowledge of mechanical design and drafting.

United States, NC, New bern | Engineering & Manufacturing | Rating 0.0 (0 reviews)
A PhD student of Telecommunication

Interested in high-frequency systems, electronics and antennas, Good familiarity with Matlab. Familiar with antenna design tools (HFSS, ADS-momentum) and circuit design with ADS. Also done some work on software GPS algorithms in C++.

Belgium, Vlaamse Brabant, Tervuren | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Let's make Electronics Simple.

Have any problem regarding circuits? click me & i assure you to help till your doubts or problems get solved! Specifications- 1) PIC programming 2) Robotics 3) PCB 4) Electronic concepts 5) Circuit Designing 6) Anything else regarding microcontrollers & Circuits

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)

MEP (Electrical Project Engineer) Roles & Responsibilities Preparation of Electrical, Mechanical and Plumbing shop drawings for approval. Preparation of MAS for Material approval Preparation of Request for Inspection (RFI), Technical queries and Method statements. Preparation of Bill of Quantity (BOQ) for tender submission Collect the quotation from suppliers and subcontractors for tender submission. Preparation of variation and savings on post contractual tender and current projects Preparation of labor histogram as per construction programme Preparation of load and voltage drop calculation Manage project schedules and budgets and Obtain permits for operations Make engineering calculations in connection with field and office assignments testing, inspecting the equipment and documentation Ensure compliance with safety requirements, standards and procedures. Perform highly specialized design, research, and analysis on every project and advice on code compliance

Oman, Muscat, Muscat | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional Electrical and Electronics Engineer

I have an excellent academic record in Electrical and Electronics Engineering. In addition, I am fluent in many technical programs like: Orcad, Matlab & Simulink. I am more specialized in the below: 1- Power Electronics. 2- Control Engineering. 3- Bluetooth Technologies. 4- Electronics and Electrical design. 5- Strong Radio Engineering & Science background. 6- Wireless & Telecommunications.

Finland, Espoo, Espoo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I want to work with you!

8 years of 3D cad design and automation, using Microsoft office applications and custom developed software. Previous job positions were tool designer, and engineering details specialist. Visual Basic .net and VBA programming knowledge with a cad customization and integration focus. Recent owner of a 3D printer bringing to life my 3D cad designs. I can design, document, and prototype for you using Office, adobe apps, Solidworks, Alibre Design, and other tools. Or help you build custom software solutions for desktop, mobile and the cloud to integrate and automate your CAD projects or products related to 2D and 3D cad. I do this because I love it.

United States, IL, Calumet park | Engineering & Manufacturing | Rating 0.0 (0 reviews)
cnc wood programmer any type

I have 5 years of UAE experience as CNC programmer ,CNC and beamsaw operator,artcam designer and programmer,CAD/Cam programmer.g-code programmer. Worked as cnc production in charge also with leading interior fitout company in dubai.

India, kerala, kozhikkode | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Concept Designer, Stress Analyst

I am M. Tech. from IIT Kanpur in Solid Mechanics & Design. I have total 12 years of work experience in Design, FE Analysis, and Fatigue Analysis & Testing. I started my carrier as Fatigue Test Engineer where I worked for 2 years in R&D, Fatigue Testing Lab. Afterwards, I worked for 6 years as Scientist ?C? in Aerospace Structures Division of DRDL, Hyderabad where the nature of work involved Design and Finite Element Analysis of Airframe Structures of missiles like Wing, Control Surface, Nose Cone, Section with cut-outs and bulkhead, Mechanisms, Air bottle etc. Then I joined Infotech Enterprises Ltd, Hyderabad for One Year & 8 months as Project Leader for structural analysis of Sandwich Composite panels of A380. In my previous employment I worked with Goodrich Aerospace as a Product Development Lead for Design & FE Analysis Blocker Doors, the main component of the Thrust Reverser assembly. Currently I am working with Airbus UK as R&T Lead Stress Engineer.

United Kingdom, Bristol, Bristol | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded System Designing, Automation

TECHNICAL SKILLS ? Technical and Software programming ? Advanced Knowledge of C,MATLAB/Simulink. ? Data Acquisition ? GPIB and RS232 Automatic Measurement Benches setting. ? Laboratory Instrumentations ? Oscilloscope, Logic Analyzer, Signal Generator, Antennas and CEM characterizations, EMI Receiver, Optical Fibers, V/I/Ohm / Power / frequency measurements. ? Fourier/STFT and Wavelet Analysis ? Analysis and Synthesis in transformed domains of monodimensional and bidimensional signals. ? Control System Design and Analysis - Control designing techniques for linear systems. Control designing techniques of non-linear systems and stability analysis. ? Optimal control techniques and State-Feedback control systems designing. Microcontroller ? Microchip ? Pic, dsPIC, PIC32. I have developed many firmware for various projects and many of which I published on my youtube channel

Italy, NAPOLI, VICO EQUENSE | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Industrial design graduate, experience in product design, competent in Solidworks, Cinema 4d, Real Flow, Photoshop, Adobe Premiere, After effects.

Australia, nsw, Dural | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Architecture designer,Data Entry, Customer Service

I work as an Architecture designer at a construction company, working as a part time data entry at Accounting office, worked as a customer service on phone for servile companies, and promoted to be team leader.

Egypt, Giza, October | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am Architect and I have a Master's degree of Architecture and can help you with any architectural or design related problem. i love working in 3d world I have experience in designing, modeling and rendering in auto-cad, 3d studio Max, sketch-up and Vray. for larger jobs I have a team of my coworkers (architects, engineers and designers) for speeding up all the process..

Algeria, JIJEL, JIJEL | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Embedded Systems and Design, PLC SCADA prog

I Have good Experience in Embedded system and Design(Microprocessor and Microcontrollers (8085, 8086, 8051, 89C51, ATmega 16, PIC ARM.)), PLC SCADA programming, HMI AC & DC drives, etc

India, maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical Engineer (Design, etc..)

I will design for you. I have 20 years experience in electrical engineering

Philippines, Rizal, Antipolo | Engineering & Manufacturing | Rating 0.0 (0 reviews)
expert designers

We are a team of experienced design engineers providing the most comprehensive solutions in areas of Computer Aided Design. We provides the services available today and is an offshore solution for CAD contracting services like CAD Conversion, CAD drafting , GIS drafing solution, 3D Modelling of Buildings etc. We also provide the graphic designing solutions like logo designing, brochure designing etc.

India, KERALA, KUNDARA, KOLLAM | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Professional Architect-Structural Project Manager

My name is Sedick Lukie, I have worked for International Structural Consulting companies as Technician and Architect for fifteen years based in South africa. My field of expertise is Structural Steel and reinforced concrete design for high rise building and bridge design. The project I have completed is Cape town film Studios-Stellenbosch-South Africa and Coega Bridge Port Elizabeth-South Africa. I have completed many infrastructure projects for Water treatment plants and pump stations for new developments. We would provide drawings for New developments in Acad or 3D Models depending on clients needs.

South Africa, western province, Cape town | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Experienced Architect and Urban Planner

Architect with 35 years of experience in housing and public building design (hotels, schools, university buildings, public services building etc). Expertise in Urban Planning.

Greece, Achaia, Patra | Engineering & Manufacturing | Rating 0.0 (0 reviews)
AutoCAD expert

I am a civil engineer. I have more than 7 years experience in AutoCAD, 2D Modeling. Good in: - CAD Drafting - Space planning and detailing - Turning sketches into CAD file/drawings - Renovation/Expansion/demolition drawings - Engineering drawings

Germany, Quebec, Montreal | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical engineer 12 yrs experience in design

I m mechanical engineer with 12 yrs experience in design. I m well versed with software like MS Office , Auto cad, Pro-e wild fire , Solid works.

India, MAHARASHTRA, MUMBAI | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded Engineer

Professional Embedded Engineer Experienced in: Embedded system Design & Development Embedded Firmwares Multilayer PCB Designing

India, Kerala, Cochin | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I'm the author of the Engineering Drawing & Design supplement CD that contain 1640 3D interactive illustration from the blue print in the Engineering Drawing & Design, 7th edition book by Cecil Jensen, Jay D. Helsel and Dennis R. Short, Published by McGraw-Hill Higher Education. Below is the link to the CD I'm selling right now: I will classify myself top level in reading blue prints and convert them to 3D rendering using Solidworks.

United States, MN, Blaine | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical designer

Mechanical designer/design software user/aeronautical engineer graduate/working for an airline company

Turkey, Istanbul, Istanbul | Engineering & Manufacturing | Rating 0.0 (0 reviews)
The Greatest

I am a C.A.D drafter who has recently graduate high school and will be further my education. I have experience in designing product for customer. Seeking to gain more experience, and build my portfolio. Proficient in multiple C.A.D software, microsoft product, and I'm Solidworks Certified (Solidworks Associate - Mechanical Design). I also have experiences in web design.

United States, IN, Gary | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Profesional CAD Tech

I have A lot of civil engineering design and draughting experience, I am proficient in a lot of software and I like to get challenged in all aspects of the job. I'm enthusiastic and love learning, that's why I can do some it stuff as well

South Africa, Gauteng, Johannesburg | Engineering & Manufacturing | Rating 0.0 (0 reviews)

MECHANICAL ENGINEER with Good orientation in the technical drawings and documentation,Sound knowledge in fabrication,HVAC and piping designs.Well versed with Automobile Maintainance and Fabrications.

India, ANDHRA PRADESH, MAHABUBNAGAR | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Provide Professional 2D & 3D Custom Home Plans

Professional Architectural Custom Home 2D & 3D Plans

United States, CA, Templeton | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Has over 10 years experience in embedded systems, electronic designs and firmware development. I've been working on software programming from microcontroller to application level for electronic gadgets. I've applied these skills on POS development, device tracking, multimedia and secured routing.

Philippines, Rizal, Antipolo City | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a Mechanical Design Engineer with extensive experience and knowledge in various industry fields. In my career i handled hundreds of design projects such as: sheet metal enclosures, car safety systems, shaft couplings, tools and measurement devises, wood decorations for cars as well as light aircraft internal structure elements or toy rockets outer shells. My CAD skills involve more then 7000 H of SolidWorks, Catia V5 and AutoCAD useage

Romania, Bacau, Dofteana | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am a Landscape Architect with a strong background in technology, design and hand graphics. I graduated in 2013 but I have been doing freelance work for a few architectural and landscape firms as well as some local organizations that need help with logos flyers and other small graphic work for over 3 years. I am able to work under time crunch situations and sometimes thrive in them. Due to my technical skills, I am able to work cross platform (between different software as well as between different mediums like digital and hand drawing). I am extremely proficient in Sketchp, Rhino, Autocad, ArcGIS, as well as the Adobe Creative Suite (including video production software like Adobe Premiere and After Effetcs)

United States, NY, Brooklyn | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Over 10+ years in Circuits Design, Such as MCU(C8051F,AVR,MSP430), FPGA(Altera), Amplfier, MIXER, Can program with C, VHDL

United States, MI, Okemos | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Work Together Grow Together

We are one stop solutions for Embedded Product development. We have team from PCB design to Firmware development, SmartPhone development team, Mass production support from China. offices in China and USA also.

India, Gujarat, Ahmedabad | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert Designers, Engineers & Developers

We are a team of professional developers who can work in different technological aspects. We are experienced in any mechanical and electrical engineering designs needed. We are graphics designers with a great experience in 3ds max, Solidworks, Photoshop, Aftereffects, Illustatrator and Rhino. Also, we have experience in web design and web development. Our experience is in the field of HTML5, CSS3, Jquery, Photoshop and Illustrator. We only have one option, deliver our work full fledged.

Egypt, Alexandria, Alexandria | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Architectural Designs, Plans, Renderings, Models

I am talented Architectural Designer that grew up under the tutelage of a Registered Architect. I have been working in the design industry for 20+ years both as a designer and a builder. I am experienced with ArchiCAD, Revit & AutoCAD as well as Photoshop and 3ds MAX. I strive to not only get the job done right, but on time and on budget as well. I am looking forward to all the great projects that I may help become reality.

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Retired Electronics Engr, Tech Writing Expertise

Retired Electronics Engineer, Aerospace, Semiconductor, Test experience. Interested in part time work at home. Experienced in technical writing (proposals, specifications, procedures). Have enjoyed personal writing (autobiography, stories, monthly church sermons)

United States, UT, Hyrum | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Electrical and Computer Engineer here to help you!

I'm an Electrical and Computer Engineer here to help you. Most of my work has been in analog design and PCB layout. However, I have also worked on embedded design and Android programming. I look forward to working with you!

United States, NH, Lebanon | Engineering & Manufacturing | Rating 0.0 (0 reviews)
i am a worker

Seo, graphic design, web research, web marketing, Data entry.

Bangladesh, vatara, Dhaka | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Solidworks and AutoCAD Designer and Draftsman

Mechanical and design engineer, I would like to help you achieving your design projects and turn your Ideas into real 3D models ready to be produced.

South Africa, Khartoum, Khartuom | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Electrical & software engineer with extensive experience in hardware & software design, embedded programming, analog & digital circuit design and simulation, software development, VLSI design and hardware description languages, and PCB design. Open to all electrical, computer, and software engineering opportunities.

United States, MA, Boston | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert designer

I am a commited, hard working individual with vast experience in Architectural design, Space Planning and Landscape design. I have worked for various design companies in Johannesburg, South Africa.

South Africa, Gauteng, Johannesburg | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I have designed printed circuit boards from actual circuit diagrams using dip trace software.

India, TN, Chennai | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Having strong conceptual & fresh practical knowledge, seeking challenging opportunities in the vast field of Electronics, within an organization where I can enhance my expertise via working under the supervision of professional management.

Pakistan, Sindh, Karachi | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Matlou is a self motivated and dedicated individual. A civil engineering graduate with 10 years experience in the design of structural steel and reinforced concrete structures for the mining industry. He also has experience in the design of sewer lines and storm water drainage system and 2D drafting in AutoCAD.

South Africa, Gauteng, Johannesburg | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Embedded systems engineer

Graduated from South Ural State University. Specialist in Embedded systems and Automation fields. Postgraduate student, my scientific interest is force-torque sensing of mobile robots for hazardous environment.

Russia, Chelyabinsk region, Miass | Engineering & Manufacturing | Rating 0.0 (0 reviews)

-over 4years of making designs and drawings...lets do what you like me to do..;p

Philippines, Cebu, Lapu-lapu | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Bsc In Eng

Skilled engineer with 30 years of experiance in designing equipment for power plant industry, process equipment and engineering programming.

Serbia, Serbia, Krusevac | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Well, I have a very good knowledge in electronic, mechanics and programming and 3D model designing. I love doing projects and I am a creative guy. I like to build those things that i need instead of buying them from the market. I am very much into designing 3D models. I am very much interested in automobiles. I need money to fund my projects. For that i need your works.

India, Kerala, Trivandrum | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert In 'CAD' 'CAE' 'Machine Design'

I have worked on CAD softwares Like SolidWorks, Siemens-NX, AutoDesk Inventor for 2 years in a Industry. Also I have carried out project on Optimization of Mandrel Shaft which include fatigue failure analysis using FEA and ANSYS.

India, Maharashtra, Pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)

I am an experienced telecommunication engineer with a vast knowledge in electrical design, networking, telecommunication and advanced mathematics. I work well with clients and i do my best to complete my work for the given duration of time.

Kenya, Eldoret, Eldoret | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical Engineer

I am a Mechanical Engineer From Well-Known High School. And i'm working for a well-known aerospace company. I have much interest in Technical Product Design and CAD modelling. I am good at CAD modelling.

Morocco, Eljadida, Eljadida | Engineering & Manufacturing | Rating 0.0 (0 reviews)
I love making SketchUp models

I a UK trained architect, now living in New Zealand. I design museum exhibitions when I am not doing Sketch Up contracts.

New Zealand, Auckland, Auckland | Engineering & Manufacturing | Rating 0.0 (0 reviews)
reliable, quality, engineering & Technology

12 years of experience in Product Design & development. Caters projects of Medical devices & consumer good industries like Pumps, Dishwashers, Filters, Medical Device, Implants, electric connectors, Refrigerators. Handled independently 3Million dollar projects.

India, Karnataka, Bangalore | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Creative architect with concept in mind.

I'm an ambitious architect with strong will for creating quality designs and performing various tasks. I'm devoted to my projects and responsible to my clients. You can rely on me for delivering the perfect solution for your job proposal.

Bulgaria, Sofia, Sofia | Engineering & Manufacturing | Rating 0.0 (0 reviews)
electronics engineering student

experinced for my own in electronics and PCB design, i have CLAD certificate of TI Labview.

Spain, Madrid, Madrid | Engineering & Manufacturing | Rating 5.0 (1 reviews)

Christopher Moore is a Registered Landscape Architect in the State of Maryland. He has over 16 years of professional experience overseeing the landscape and site design, construction and/or evaluation on a variety of project types ranging from federal, state, municipal and institutional to residential, commercial, cultural and ecological restoration. Mr. Moore worked for several notable firms in the Baltimore/Washington Metropolitan region prior to establishing himself as an independent consultant. His specialties are project documentation, site layout and grading, planting design, stormwater management, ecological restoration and remediation, permitting and project management.

United States, MD, Annapolis | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Creative Flare, Practical Application

People dream, engineers make it work. With over 20 years in design and research let me put your ideas into action.

United States, TX, Bryan | Engineering & Manufacturing | Rating 0.0 (0 reviews)
CAD product design mechanical design

I am a freelancer with expirience in part design, surface design, plastic part design, sheetmetal design, tool design... Always ready to collaboration, Licensed software

Bosnia and Herzegovina, RS, Teslic | Engineering & Manufacturing | Rating 0.0 (0 reviews)
3d artist

I have professional experience. more than 2.4 years working experience architectural design Currently I'm looking for long-term full-time or part-time job.My Software...

India, maharastra, pune | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Expert HSE , Mech/Biomedical Eng. experience

Have experience in structural steel-petroleum installations Health Safety and Environment supervision and report writing; Health care diagnostic and laboratory equipment maintenance and repairs with user training programme design for specific calibre of health care givers.

Kenya, Central, Kenol | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Iam a student in mechanical engineering, professional in Pro-E, and good at Autocad I have good imagination skills, so creativity involving tasks are simple for me to do. Iam good in subjects like machine design, maths and operations research.

India, Andhrapradesh, karimnagar | Engineering & Manufacturing | Rating 0.0 (0 reviews)
Mechanical engineer, Expert Autodesk Inventer

I'm a mechanical engineer. Now I work for VIETNAM CNC technology application J.S.C(, my work is designing machine from customer request. I use Autocad, Inventer fluently with all application feature for my work and have 8 experience years .I designed a lot of machine, you can see more detail Portfolio

Vietnam, HA NOI, HA NOI | Engineering & Manufacturing | Rating 0.0 (0 reviews)

Keen ability to establish Rapid Continuous Improvement, Value Stream Operation, and Culture Change to increase net value of companies, increase productivity, reduce lead time, eliminate variation, maximize profitability of High-Tech Products and Enterprise Services related to R&D Engineering, New Product Introduction, Test & Integration, Lean Manufacturing, Supply Chain Management, International Sourcing, Corporate Quality, Health Safety & Environment, and Project Management strategies in support to Sales, Marketing and multi-site cGMP facilities worldwide.

United States, null, null | Engineering & Manufacturing | Rating 0.0 (0 reviews)