Four years of academic and professional experience in microwave engineering and process optimization of millimeter wave technologies. Proven track record in identifying problems and developing innovative solutions in designing process. ? Exceptional attention to detail, adherence to standards and technical background. ? Strong technical and methodical aptitude with an innate ability to analyze, coordinate and synthesize data. As a microwave engineer ,I am responsible for design, involved in fabrication process and testing of microwave components and subsystems. Areas of research include Microstrip antenna, open ended circular waveguide as an antenna or waveguide transitions and junctions, ICs and RF devices modeling, phased array antenna, microstrip filters, Tx/Rx block diagram designing. ? Highly skilled in planning and analysis with key strengths in project management. ? Performance Test Simulation/Verification
I am an Electrical and Electronics Engineer. My cumulative grade point average in my undergraduate studies is 3.95 in a scale of 4. My position is among top 2% in my department. Programming Language/ Design skill: ?? Assembly Language , C, C++, C#, Python, Java, Verilog. Professional Software Skill: ?? Matlab ??Cadence ?? Proteus ?? PSPICE ?? HSPICE ?? LTSPICE ?? AVR Studio ?? Adobe Photoshop ?? Adobe Illustrator ?? Autocad ?? PSAF ?? Adobe Flash ?? FEKO ?? Microwind ?? TinyCAD
skilled with design and drafting in , 1.CATIA 2.AUTOCAD 3.FIDES 4.SOLIDWORKS 5.UNIGRAPHIX 6.PDMS 7.CAESAR-II Capable of creating any assembly models and drawings. Have 4 + years of work exp in 3D DESIGN AND 2D DRAFTING.
-BSc. Chemical Engineer, Certified LSS Green belt, Certified Quality Engineer CQE, with deep experience in the field of industrial building materials industry(PVC flooring, Adhesive & sealant, waterproofs, paints & coatings and Dry-mix products) -Certified LSSGB -ISO 9000:2008 IA -TOC Enthusiast -Interested in the Quality & Process management improvement.. - Practicing and deploying Lean Techniques , Six Sigma and TOC approach. -Looking for new challenges and roles in the field of industry or service.
I'm a structural design engineer with an experience at structural building analysis that i acquired through several project, also i have an experience in structural modeling using Revit, in addition to my experience in using primavera.
I have been working with Autocad for 18+ years now so I can get the job done. I have also used many other CAD programs so my ability to adapt to new thing and get the work out is now a problem
We are provide Electrical Design service for overhead cranes as contract basis or be the best outsourcing destination for documentation. We are qualified electrical engineer with hand on experience in electrical designing for all types of overhead cranes. Electrical Design Service 1) Estimation and costing for electrical system. 2) Schematic drawing for all types of overhead crane 3) Panel drawing & cost estimation 4) Electrical BOM preparation & cable calculation 5) Design of power supply scheme(Bus bar) suitable for crane Database & Documentation preparation 1) data validation job for various electrical component 2) Help you to make electrical database for crane 3) Electrical documentation or preparing the product catalogs 4) Helping for any type of drafting job including mechanical part using AutoCAD or similar. 5) Any type of documentations related to design. just put a mail for more info and costing details.
My goal is to advance the renewable energy industry by promoting safe and efficient PV system design and installation procedures; and by improving PV system performance utilizing my system engineering and extensive data analysis experience. I hold a bachelor of science in electrical engineering, passed the entry-level NABCEP, system design and installation experience. Very comfortable with Microsoft Office Tools and multiple CAD tools (AutoCAD, Sketchup Pro, Adobe Elements).
I have a good experience in 3d modeling. I've been worked with different projects and companies worldwide. I am working with SolidWorks, and i have SolidWorks certificate proving my skill. If You need a high quality design engineer - here I am =)
Industrial Design / Product Design
I am an industrial designer engineer with experience of over 8 years in product development from the stage of conceptual design to industrialization. The projects developed range from short runs to 50000 units/year, involving the design of injection molding parts in plastic and aluminum, sheet metal parts and machining among others.
I am an electronic designer with more 10 years of experience in the electronics field. I designed various electronic projects. - Embedded System (ARM Cortex-M3, PIC, DSP) - VLSI System (Altera, Xilinx) - PCB Design (Cadence Orcad, Altium Designer, Eagle) - Electronic simulations (Multisim, Proteus) - LabView - Matlab - Programming languages: C, C++, Assembly, VHDL, Verilog, VB.net - Siemens S7-1500 / S7-1200 - SCADA
As Mechanical Engineer 6 Years R&D experience, I have experience designing atomic clocks, early stage development of the Keurig VUE portion pack, developing a recuperator to improve efficiency of a burner. If your project is anywhere between concept and production I can help you. Contact me now and we can get your project moving! email@example.com
Master in architecture, working as interior designer for 5 years. Own company EXPANSION STUDIO specifyed for interior design.
I offer my services as a mechanical designer. Drawing in Solidworks, autocad or Radan. In my portfolio, some work's pictures. Nowadays, I'm working for a company who manufactures axles and robust pneumatic suspensions for semi-trailers
Electronic Design Service Vietnam - We have a team with more fifteen years in Electronic design service. - Our specialties include RF, FPGA, MCU, CPU design circuit, Verilog HDL for FPGA of Xilinx, Altera and embedded software for CPU, MCU of Freescale, TI, ST, Atmel... Our EDA Tool-set - Cadence Orcad, Allegro software - QuartusII, ISE, Modesim software - IAR embedded software
I am an Landscape engineer with extensive knowledge of graphics and computer-aided design. I'm very interested in working with you further as I feel I have the necessary skills required for this.
I have more than 5 years experienced in Landscape Design and currently working in a big landscape firm in Singapore. I am also a Licensed Architect and Master Plumber in the Philipines.
Hi. My name is Pawin Seangson. I'm interior designer from Thailand. I work about 20 years old. That concept design and detail . I can control cost time and quality in design if you want. I not fix my rate. That follow on easy -hard job. Hope we have joy work. Thankyou.
Profile: Master of Architecture Dedicated Junior Architect with 2 years experience in the design of various object types (residential, office, school, hotel and sports facilities) Experience in making drawings, schedules and architectural specifications Experience in create conceptual designs, detailed architectural projects and interior designs Experience in cooperation and coordination with other engineers (construction, mechanical, electrical) Ability to work in a team Ability to work within short deadlines Work in AutoCAD 2012, Revit 2012, Autodesk 3ds max 2010, Photoshop CS3, MS Office (Word, Excel, PowerPoint)
I am STRUCTURAL DESIGNER worked in various Prestigious Indian Projects.I have designed various Steel & Concrete Structures with are proven as optimistic designs and well executed in sites with out any problems.I have done research on strengthening materials and I have suggested efficient solution to resume the damaged structures .I I have good exposure in international Codes. Till now i have designed structures in optimistic values(with in the budget of client) and with in the time frame. I can give the efficient designs with in the time frame and with in the conditions of client.
As a Graduate, I look to this job to widen my horizons and refine my knowledge and technical skills in my areas of keen interest, viz Automobile, MEMS and NANO Technology, Pneumatic Circuits,. These interests unfolded in the early semesters when I studied courses like MEMS and NANO Tech., Autotronics, Hydraulics and Pneumatic System, Advance Manufacturing Tech., Electronics Manufacturing Tech. etc. I believe it will serve to give direction to my goal of a career as a CNC and PLC Programmer and Intellisuite Fabrication. In order to reach this goal, I want to do the job in your company. I am quite an assertive person having a highly optimistic attitude -one who, however, believes in simple living and high thinking. Hoping for an early and favorable response from you.
Being a production engineering graduate and specialized in Manufacturing technology, I am having vast work experience in using CAD, MS Excel, power points, data analysis etc. Presently associated with academia in the field of mechanical engineering. Having interest in process optimization, study material development for different courses, technical writing, etc. Side by side also I have been a content/ article writer.
I am an experienced design professional with more than 20 years of expertise in electronic and manual mapping systems. I have been actively utilizing AutoCAD and GIS technologies since their inception in various engineering and regulatory environments. Process a wealth of experience with raster and vector data formats from DWG, GeoTIFF to complex geodatabase. Enjoy using my analytical and technical skill sets as a company resource for the creation of solutions to move project work forward in an accurate and timely manner.
I have knowledge of my core subjects of PLASTICS ENGINEERING such as Plastics processing, plastics materials, Plastics product and mould design, Machine design, Plastic product testing Polymer science, Polymer chemistry I have also basic knowledge of Design software CATIA, PRO-E, U.G, Auto-CAD.
I am a confident, highly driven person with desire for knowledge. I have a strong ability to understand physical problems deeply which gives me the advantage of finding simple solutions to them. I have a practical mind and love push my imagination and creativity to design the solution of a problem. I have high goals for my career and so I don't hesitate to get and work hard for it.
Hi, This is collin.it must be magic we meet here, i can offer good service for you aim. Maybe you will ask me what you offer, i can tell u, mostly i can do it including design. reserch. writer.and so on.
Mechanical engineer with experience in 3D modeling and design
Skilled in designing mechanical parts in catia, pro-e, autoCAD, solid works
I can operate the software AutoCAD 2D and 3D (for design Inspection Jig), and I also can operate measuring devices by Faro Arm and Cimcore.
Engineer?with a strong applied background in Chemical Engineering, exceptional data collection and analysis experience, and in-depth engineering expertise seeking Engineering Management role focusing on Manufacturing or Operations business units. Core competencies include: ??Applied Engineering ??Project Management ??Process Improvement ??Operations Management ??Quality Assurance Management ??Data Analytics
I'm professional high skilled architect designer providing services in the field of interior design, photo-realistic and conceptual 3D render. And also in a graphic design. I have extensive 5 year experience in the design and 3d visualization so you can be assured of high quality of the result.
A hundred years ago, you would have contacted Tesla. Two hundred years ago you would have found the blacksmith who could to anything from fitting horseshoes to pulling teeth. Today you'd look for an intensely curious polytechnical engineer, who just can't leave juicy new technology. One who would absolutely LOVE helping you get your project from the realm of fantasy to the realm of reality, where you start seeing the cash roll in. If you are ambitious, you'd look for one who is extrovert, (also beyond looking at your shoes instead of his own), and who can run the project and fine tune your local team as he is finishing the project. That's me. I do turnkey prototyping. I know good chunks about pretty much everything in the book from genetics to geology and I do my own design, schematics, PCB layout, testing, firmware programming and PC frontends. Vision systems, communication, laser technology and optics, sensor technology, thermodynamics... let's talk.
LEED consulting,Energy efficiency,Thermal modeling,Solar analysis,Energy technology feasibility studies, HVAC design
I am a Mechanical Designer by trade, and a Mechanical Engineering Technologist by degree. I have always enjoyed designing and building a wide variety of things, from K'nex bridges and robots to tree houses when I was younger, to custom furniture and rebuilding motorcycles now. My day job involves designing custom blending and conveying equipment for the plastics processing industry. I also maintain the standard product line, as well as manage past job history. I am a part time freelancer, and am available to work evenings and weekends.
Registered Project Architect with 14 years post-education experience working on a wide range of project type and scale. I have a passion for quality design, precise work, dedicated work ethic, and personal touch. Expert user with the latest AutoCAD software, as well as well-versed in SketchUp, Shaderlight, Revit, Photoshop, Microsoft and Apple platforms. Project Types Include: - Historic Preservation - Single and Multi-Family Housing - Commercial/Office - Retail/Hospitality - Small Healthcare - Master Planning - Interior Design - Remodels/Renovations - 2D/3D Renderings
I am having 7+ year of experience in PCB designing. I am using PADS & Allegro EDA tools. Able to develop Embedded application in microchip PIC
Simplicity defines my approach towards solving an electrical problem but customer satisfaction and design integrity remain central to my endeavor. Indeed, what my customers perceive as their needs are the golden rule to my professional success. So, my first task is really to understand the customers' requirements and needs behind a project. While my consultancy will account for the budget allotment, I will never compromise the integrity of my design especially towards safety. After all, electricity befriends no soul during an accident. Comprehensively then my design particularly for sizing and installation lends much from standards. My consultancy continues with the actual installation wherein its testing and control are central to the success of the project. Timely tests such as voltage, insulation or RCD functional test are integral to assure installation lives to standards and norms. Therefore, I prize in closely monitoring contractor's test reports. Finally, handing
I am a Mechanical Designer with over 17 years? experience in product development from concept stage to finished product. I believe in completing jobs correctly and when promised.
Thanks for visiting my profile page. I have experiences for 8 years on Circuit design,including Digital and RF. In particular,I have developed sch and pcb designs using circuit design tools, such as Altium Designer Summer, Protel and OrCAD. Also I have many experiences on Embedded design,including ARM, DSP, FPGA, PIC, USB, and so on. If you are looking for me,you will satisfactory in all aspects,including quality, price, speed, and so on.
manufacturing engineer with proficiency in Solidworks.
I offer services from my home. I have a lot experiance in mechanical designers. I work in inventor, solidworks and oldest mechanical desktop. I work also in surfcam for cam. I have many experiance in mold design and airspace parts
I am a talented and experienced Solidworks Designer. I have good experience with Solidworks and I have been working as a Solidworks Designer for many years. I am a hard worker and enjoy working at all critical conditions. If hired by you I will be responsible to complete the task within the stipulated time frame and with utmost confidence. Outsource me for your project and I promise to bring in the best output.
i'm is an Interior Designer, 3D Artist. I can do the job: interior design exterior design furniture design sketch up modeling architectural design 3D visualization / Rendering CAD drawing
Design Drawings in AutoCAD Architecture, AutoCAD MEP 2014 from concept to final. Conducting Structural Analysis in Bentley STAAD Pro V8i and STAAD Advanced foundation design, Technical writing, BOQ, Designing in AUTOCAD Architectural, MEP, Infrastructure and Building Construction of multiple projects Designing in AUTOCAD District Cooling Piping Infrastructure for Piping length above 2 KMS for multiple Plots of Mixed Use Development Designing in AUTOCAD Infrastructure Projects ? Storm Water Networks, Sewerage Networks, Manholes, Roads Structural Design for outdoor Large Video Screen 30 Mtrs x 10 Mtrs in STAAD and AUTOCAD Designing in AUTOCAD the Facilities and Horse Race Track Designing in AUTOCAD the Logistics, shifting, Space Planning, Architectural and MEP for central stores with multiple warehouses Fabrication of Vessels, Trusses, Structures, Heat Exchangers, Cooling Towers, Steam Dryers, Oil Tanks, Ducts, Chimneys, Pipelines.
Almost 3 years of experience in Complex surface based plastic items design. Familiar with international standard specially Japanese Plastic Design Technology. Catia and Solidworks Expert. Design-3D Modeling Metal and Plastic Item Design 2D Drafting Visualization and Animation.
I am a very dedicated draughtsman with 10+ years experience in mechanical, structural design and detailing both in 2D and 3D. I also have some extensive experience in piping and instrumentation design. I have experience with AutoCAD, Autodesk Inventor, SolidWorks, Autodesk Plant3D & Autodesk P&ID. I like to take peoples ideas and turn them into a reality.
I have worked with local architects and interior designers in visualizing their projects to give them optimal satisfaction from their clients. I also have had diversified experience related to my field working on-site log booking and punch listing items during construction. I have designed numerous residential and commercial buildings and their respective interiors and currently designing a 28-storey condominium, and produced working drawings and contract documents. I studied BS Architecture in the University of Mindanao having graduated with the best in thesis entitled ?Mixed-Use Development: A Revitalization Project? with studies involving deconstructivism, the space frame, and the application of diagrid structural systems in high-rise buildings. I look forward to working with you, and I can guarantee production and excellent quality for your architectural needs.
injection mould design
A professional Tool maker, Tool Designer, Currently working on Product Design (Automotive Trims). Good Working knowledge in Catia V5 and Autocad 2012 Certified associate.
have more than 10 years of experience working as a Piping Designer/Draughtsman and Mechanical Engineer specializing in 3D Piping Design for Oil and Gas/Petrochemical/Refinery. I have advanced skills in 3D CAD Modeling softwares such as AutoPLANT, CadWorx, and AutoCAD. I am also proficient on other softwares such as PDMS, Solidworks, Inventor and Microstation.
I am a product/industrial designer with 2 years experience in mechanical design,CAD/CAM design, product design, 3D modeling,and 3D rendering. I am using Autocad, Inventor and Solidworks and i can give you the quality of a company with low price and in the time.
i am brilliant designer and i did multiple projects like ? Glove Interface to Sense Hand Gestures for Replication on Robotic Hand (FYP). ? Glove Interface to Sense Hand Gestures for Sign-Language Vocalization (FYP). ? Calculator having the functionality of addition, subtraction, multiplication and division in Programming-1. ? Scrabble word games in Programming-2. ? Sequential Elevator Control using logic Gates for a 3-story Building in Feedback Control System. ? Encryption and Decryption using LabVIEW in Feedback Control System. ? Clearing the blur image using MATLAB in Digital Signal Processing. ? Detection of phone number using MATLAB in Signal and System. ? Transmitter and Receiver on Bread Board in Analog and Digital System.
Professional mechanical design engineer. Working from first principles to completed product.
4 yr experiences in 3d Modeling 14 yr experiences in Graphic Design & Photography 11 yr experiences in Project Management & IT Consultant
i am an automation engineer.i've got 2 years of experience in fields like industrial network and SCADA design,electronic systems,and PLC programming.
Ongoing work for experienced designer specializing in progressive metal stamping dies for automotive, appliance and other commercial industries. Should own and operate any of the following CAD platforms: AutoCAD, AutoDesk Inventor, Solid edge, NX 9 and/or Pro-E. Designs to be in 2D or 3D depending on project.
I am a Civil Engineer with 10 plus years of experience in drafting, engineering design, and construction. I am a licensed General Contractor and Engineer and hold a BS is Civil Engineering. Made in the U.S.A.!
I've been working as a mechanical design engineer specialized in hydraulic parts, electric motors and air parts. I have experience in translating machines, automotive, industrial and related documents.
Seasoned environmental professional with extensive experience in the assessment and management of environmental, health and safety risk. Experience has included environmental compliance auditing and due diligence on all continents and most countries. Design, permitting and construction experience across industrial sectors and environmental media. Deep experience with metals, chemicals, food and beverage, automotive, pharmaceuticals, packaging and waste industries. Has taught graduate level courses, developed and led training courses in many industries.
3 years in Sales in Gaming Industry Market research, Customer support 2 years in production technology, production of CNC machines, CNC programming Eglinsh speaking well both, in written and oral communication Specialties: CAD/CAM desing (Pro Engineer, SolidWorks), Production planning
Graduated B.Arch from Mumbai University. Interior Designer degree from USA. Worked and lived in USA for 16 years, now in India. Working on projects in Africa, Canada, Caribbean Island, India and USA. Working on buildings using maximum natural resources.
My name Ranya, i am an architect with experience in architectural design and graphics, urbanism, modeling 2D & 3D, advertising display, word processors, design of architectural plans, ...
Hello, I am a fashion designer; with over 15 years experience in the apparel industry. I have experience in creating the concept through the complete development of styles. I have been responsible for management and execution of all pre-production functions for different clothing categories, from costing to final approval.
Design experience with SolidWorks for UK and Finland based companies. BEng Automotive Engineering graduate 7 months working experience as a Quality Engineer for a company that produces parts for automotive OEM's. 2+ years working in an engineering environment with sheet metal parts for the automotive industry. Looking to take on projects in 3D modelling, surfacing, 2D drawings etc. Examples of work: http://anttidesign.tumblr.com/
I am an electronics engineer. Experienced Designer and Engineer handling in: -UAS Autopilot, specifically with rotary wing air vehicles. -Analogue, digital, LED, GSM, GPS, IMU, 8/32-bit microcontrollers, embedded system and PCB design using CadSoft EAGLE. -Creative Freelance with skills in 2D drawing and 3D modeler using SolidWorks
i am a beginner with this as a profession but have a huge experience in projects of design developing, like to face challenge, and with good working efficiency. money doesn't matters a lot! its a passion!
I am expert in electrical project estimation, auto cad design considering all government norm, make the bill of material, effective planning schedule and expert in reduction in price.
U.S. based Manufacturing Engineer with the ability to turn your concepts into 3D models as well as creating files for 3D printing and drawings for machinists.
I'm A Kenyan civil/ site engineer with 2 years experience in Kenya and Somalia. I have experience in design and field work in both low and high rise constructions, technical and management.
Medical Manufacturing, Machining, Plastic Molding, Die Casting Molding , investment Castings, forging process and machining. Operations management, Manufacturing Engineering Management CNC machining and precision machining, etc.
I am a degreed Mechanical Engineer with over 18 years of product design and development experience. I possess extremely strong SolidWorks modeling skills and I am and Senior Level Certified GD&T Professional. I love modeling new products and helping to get those products to market. I have a strong work ethic, and I won't claim to be able to do things beyond my capabilities just to get a job. If I can't help you, I'll be honest and tell you so. I do believe I have very strong skills, however, and I am ready to help you make your product visions come to life. I respond in timely fashion to emails and texts and am very reliable. Let me help you on your next project!
Expert in Creo/CATIA modelling,drawing,assembly creation, Expert in 2d modeeling in Autocad, Jigs & fixture design Mechanism design concept generation Benchmarking of concept
Highly experienced audio visual design and consultancy.
Architechtural/Structural Design, 3D, Autocad
I am electronics and software enthusiast, mostly self taught, have designed many microcontroller and software applications mostly for support embedded products.
TMPI Projects is an International Project Management Firm which provides highly integrated Design, Consulting Engineering, Procurement and Project Management Services across the Built Environment. Our passion for service excellence is what drove a number of leading Firms and Consultants around the World to join forces in order to offer our Clients even more value on an International scale. Our Clients benefit from the accessibility, support and market knowledge of a local Firm with the stability, resources and capability of a Multinational Organization.
JAH Design Grp is a California based firm specializing in autocad drafting and visual design. The firm was formed in 2012 by two Cal Poly San Luis Obispo landscape architecture graduates. The firm's background spans from architectural remodels to large scale commercial architecture drafting and MEP drafting. Please contact to get your projects started today.
I specialize in Product Development. My background includes experience in Mechanical Engineering (hinges, latches, linkages, gear systems), Electrical Engineering (motors, PCB design, PLC programming, MCU programming, RF systems), and Industrial Design (end-product styling, logo design, GUI).
i am working as a interior designer & planer from last 7 years i m very much skilled in 3d designing & planing i have done many projects like hotel interior home,office,shop & store interior
PROFESSIONAL Designer with strong analysis and business management skills. Diverse expertise includes: Commercial Design, Visual Merchandising, Architectural/MEP Design, 2D and 3D Drafting, Prototyping, Floor Planning/Space Planning, Interior Design, Data Entry, and Retail.
I'm a Robotics & Mechatronics engineer having 5+ years of experience of (Robotics, Embedded, Mechatronics) systems development. We provide services related to Circuit Designing, Robotics & Mechatronics system development, Embedded System development, Hardware Interfacing, Hardware Programming, System Development Proposals, Product Development You can hire us for; low cost effective solution, good development statistics and updates. Thank You!
Award winning inventor designer, patent holder, from robots to rockets we not only design in solid works we will 3D print the product
Over four years in PCB and Electrical Circuits design, lot of successful projects behind me. I do my BEST in every job.
Have over 25 years experience in the field of mechanical engineer. I have hands-on experience in putting together things I have designed. I also have been fortunate enough to test my designs.
I am seeking a consulting position as a Mechanical Design Engineer. Accomplished, results-oriented, an innovative professional, with broad-based background and expertise in all aspects of product development and design; coupled with proven track record of efficiency in overseeing complex projects and engineering operations. Demonstrate adeptness in initiating engineering strategies and recommending solutions, essential in improving work efficiencies and streamlining overall operations. Recognized as a highly effective leader with excellent technical problem solving skills.
We offer the high quality engineering services including Finite element analysis and Design at great price and meet customer's deadlines.
Having more than 8 years of experience in electronics design, I am able to handle projects related to digital design and microcontroller based.
Finished Faculty of Mechanical Engineering, stipendist of Norwegian goverment in Serbia. Work for three years on designing equipment for research and sail boats. Work in:ANSYS, MATH CAD,AUTO CAD, INVENTOR, MICROSOFT AX.
I have 6 years' experience in the fields of Architecture and Landscape Architecture and have contributed to a wide range of projects including multifamily residential, educational, institutional, and parks. I have worked on everything from multi acre site plans to tiny construction details and across all project design phases. I am highly skilled in Autocad 2D drafting, Photoshop - based drafting, and Illustrator - based diagramming. In addition, I can assist with marketing through my content-writing, InDesign, and WordPress skills. I look forward to helping you with your project.
Complete analysis and design and drawing of building structure including concrete ,steel,wooden building structure from roof to foundation and connection design and drawing as well.
I am AutoCAD Draughtsman Since 2004. Have working experience in House designing & Estimating. Working As AutoCAD Draughtsman Cum Quantity Surveyor.
Share and enhance engineering design experience throughout the world.
Young, professional designer of many trades. I can bring innovation and fresh minded ideas to your industry, at a low competitive price. Do not let the fact that this eLance account is new, I have experience using many programs and bringing ideas to the table in multiple industries.
Hardware design engineer with expertise in Altium Design. Schematic creation, BOM generation,
I am an NY based Project Manager that has a background in Industrial and Manufacturing Engineering, having worked on Enterprise Servers, ECAT and Renewable Infrastructure as both an engineer and project managers. I have been successful in launching projects and developing supply chains and processes to ensure successful product launch.
I'm a Mechanical Engineer with a background in packaging machinery design and automotive fabrication/design. My software of choice is Solidworks.
Experienced in 3D modeling, product design, drawings for manufacturiing. AutoCad. Inventor, SolidWorks.
I am Architect Engineer I do 2D & 3D Designs for (Com, Mana & Res)Buildings and i am very good in it and Creative.