Completed Mechanical Engineering (BASc.) at University of Waterloo in April 2013. Currently pursuing my dream of building a company. I strive for excellence in all aspects of my work while delivering positive value to the organization and society. I thrive working in a fast-paced and dynamic environment. My values push me to continuously improve myself personally and professionally, and the organization I work for. While at UW, I co-founded UW Entrepreneurship Society, to allow open access to resources and build connections between current and aspiring entrepreneurs. The mandate of the society is to serve as a central entrepreneurial hub for the students and guide them towards the right direction. Check out www.uwesociety.com for more info! My interest/hobbies include reading books, learning new skills and subjects, and entrepreneurship.
Working on new products and seeing them come to life is my greatest passion. I have designed new products professionally for over 6 years. I specialize in circuit design, prototyping and can oversee manufacturing. In the past I have done analog, digital and embedded system designes for consumer and industrial markets. From proof of concept prototyping to ready-made products, I am here to help.
I am engineer design specializing in development of a complete set of technical documentation (and 3D models) according ISO GD&T, limits and fits and other ISO standarts. Use knowledge of materials, of heat treatment, casting, welding, stamping, etc.
Solidworks Modeler and Mechanical Engineer in Training. I can turn sketches on napkins into 3D models quite readily. I also now have 3D printing experience, and access to Rapid Prototyping, but these machines will not do any sort of optical quality material. I am seeking another chance to prove that I am a good designer, have a strong visual/spatial skill set RE turning sketches into 3d Drawings, after a bad first experience. I AM willing to do short test work to prove myself before tackling your entire project. My last client needed an Experienced Engineer, I am but an Engineering Student and an able Solidworks modeler, about which I am nothing but up front about. The rest is hyperbole, part of his promise that I would never work on eLance again, after removing extra features he wanted to keep, but refused to pay the additional money for as promised and agreed. My fault for not arranging this additional work through eLance, lesson learned.
We are a team of Engineer and Architect with many years experience. Our key specialization is on: Civil engineering works; Architectural works mainly building designs and interior decoration; Prototype, technical drawings, presentation drawings, 3d modeling and photo realistic renderings Building materials mainly stainless steel balustrade, handrail and glass constructions; Patent Drawings, Patent search and Patent applications; Geo cartography and GIS analysis; Research works related to the field of civil engineering and architecture. We are advanced users of following software: Autodesk AutoCAD, Autodesk civil 3D Solidworks, Inventor, 3ds Max, Photoshop, Illustrator, InDesign, ESRI ArcGIS
I am an experienced Industrial Product Design Engineer, able to offer a full turnkey solution from Initial Concept to Production. A Certified Solidworks Expert, with extensive experience in Plastic Injection Moulding design. I use FEA and 3D Printing to quickly test, verify & optimise mouldings, resulting in reduced material/part cost, increased part strength and reduced risk of part failure. I Design for Manufacture (DFM) & use Tolerance Alalysis to make sure parts fit in all conditions.I have an MSc(Merit) in Advanced Product Design and a BSc(Hons) in Computer Aided Product Design. I also have the following Solidworks Professional Certifications: Advanced Mold Tools Specialist,Advanced Drawing Tools Specialist,Advanced Surfacing Specialist,Advanced Weldments Specialist. I am a creative thinker and problem solver and relish in any design challenge.
Mechanical Design Draughtsman with 10 years? experience in Solidworks 3D. Experience in the Research Environment, Development Environment, Biometrics Industry, Manufacturing Industry, and Transformer Industry. Available to start with one months? notice. Willing to relocate for the right opportunity
Qualified Agronomist, Landscaping/Maintenance Expert, Horticulturist, Experienced Technocrat. I am a Master's degree holder in Agriculture Science. Presently, I am working in State Department of Agriculture, Government of Kerala, India. I have GCC experience and worked as Agricultural Engineer in charge of Landscaping & its Maintenance in Reef Island, Kingdom of Bahrain for two years.
North Carolina A&T State University, Greensboro, NC B.S., Mechanical Engineering, May 2012 Six Sigma Greenbelt Certification Certificate in Waste Management, May 2012
Over 20 years experience in product development and testing. Business development, contracting, partnering and teaming. Also provides support for proposals on various levels from document production, concepts of operations, product concepts, and graphic media as well. Has existing patents, proven product lines of which have been acquired past low rate production phases and has supported numerous contractors with strategies for acquiring business. Has worked primarly in the U.S. Defense Industry on Air, Land and Sea Based Programs. I work very close to my clients to make a tailor fit product to support your business efforts.
Logistics: Hands-on and leadership experience across a range of logistics and supply chain functions including: production planning, procurement process management, customer service, forecasting, transportation and distribution with a diverse group of companies, products, and services. Acumen: Well-developed business and supply chain understanding attained through diverse assignments in logistics, procurement, and business analysis at both staff and manufacturing locations. Results-Oriented: Proven track record utilizing a fact-based, process-oriented approach towards reaching aggressive goals in support of cost, profit, service and organizational objectives.
We create the space around you, designed to keep your peace and comfort. We are free to work in different styles of decor and finishing. The main thing in our job - is to put a piece of soul in what we do. Both, yours and our, because only the interior that emphasizes your personality can bring you maximum pleasure and comfort.
Maintaining the On -Air presence and quality of 10 channels by the efficient operation and coordination of Digital Broadcast Automation, Production and Transmission Systems. Precise checking and processing of electronic schedules & Play out of Digital Media to ensure accurate transmission of channel content. Technical Quality Checks of all ingested & duplicated material and Satellite Feeds. Coordinate live and non-live feeds with remote broadcast facilities via satellite & fibre networks. Operation, Configuration and tuning of satellite receivers, Video/Audio monitoring and measuring systems. Check and arrange for the days downlinks/uplinks/playouts. Keep track of net returns and outgoing channels. Co-ordinate for incoming feeds, news, missing - programs, promos & commercials. Keep track of Nexio free space.
Architectural Technologist/ Consultant: Senior Management in Development, Cost phasing, QC/QA Architectural and Civil/Structural Designs and development integrities. Material analysis, Building envelopes, Organize and compile datas for Liasons and clients for packaged Deliverables. Senior Architectural Technologist: Senior Managing in Site Project Planning and Development, Survey and Building Envelope Analysis, Documentation (Procurement, Cost Estimates, QC and others). Able to produce Concept Sketches, Perspectives and feasible Drawings through AutoCAD or Hand drawn for technical "Working Drawings" in use with Building & Development Permits, and finally, stamped for Construction.
I have a total of 10 years of solid experience in mechanical design in the industry of material handling of Sumitomo Forklift and Printer Devices of Lexmark. I am equipt with good understanding of fundamental physical theories and sound engineering practices in design and manufacturing of plastic, rubber and metal parts. My experience in product development is from design until mass production and cost reduction phase. I am also higly skilled in creating detailed 2D drawing and 3D CAD models using different 3D CAD software such as MicroCADAM, AutoCAD, Pro/Engineer, Solidworks, IDEAS, NX and others 3D tools as well as proficient in technical drawing standards. I also understand BOM and schedule management or project management. Aside from design and schedule management I am responsible for parts verification using prototype models, robots and fixtures.
Hello I am design engineer in the field of lighting. I offer no college degrees, but more than ten years of experience in the development and construction (R&D) of sheet metal and plastic parts.
I have good experience and proficiency in the following: *Process design *Proposal writing *Technical Writing *Technical submittal *Operation & Maintenance guide preparation *Trouble shooting guide preparation *Costing/Estimation *Preparing bill of materials/bill of quantities *Preparing Autocad drawings like P&ID/PFD/Hydraulic drawing/schematic/Layout. Process and Mechanical Design of *Reverse osmosis plant *Desalination plant *Softener *De-mineralization plants *Grey water treatment plant *Sewage treatment plant *Industrial Effluent treatment Plant *Aerobic Biological Treatment Plant. *Anaerobic Biological Treatment Plant. *Chemical/Physical Treatment *Oxidation
Demonstrated abilities in engineering across the domains as - Sourcing ?Procurement-Inventory control-Tooling & Product Development. Excellent analytical, problem solving ability and organisational skills.
Energetic and enthusiastic team player looking forward for a challenging opportunity where I can apply my expertise in problem solving and engineering design. Good analytical skills with understanding of customer relation, operation, marketing, research and product development techniques.
* Over ten years of solid experience in the engineering, technical field in a manufacturing environment, developed technical designs, evaluated technical product performance and safety data based on experimental test program. * Responsible for all production operations, work directly with floor men, supervisors, assembly lines to ensure that objectives are met, set-up production lines up to twenty five persons, and ensure continuous quality improvement. * Working and knowledgeable of federal and aerospace industry standards, particularly in engineering drawings, materials processes, and experienced in CAL-OSHA, OSHA, HAZMAT, MIL-STD, GMP, FDA, EPA, DOT, DoD, ANSI Y14.5, ISO 14000, ISO 9000, 5S, JIT, KAIZEN, LEAN, SIX-SIGMA, TQM, DEMING, SPC, ERP, MRP, BOM, WIP, IC.
Senior PCB Design Engineer handling schematic capture and layout of different board types as customer eval, applications and ATE final test boards who can positively help with your requirements.
Civil engineer with comprehensive experience in both the Public and Private sector. Strength in Municipal infrastructure (water and sewer distribution, roads and drainage, grading, solid and hazardous waste management). Specialties: Municipal engineering design, project management, engineering field inspection.
Scott Tulloch is a mechanical engineer with experience in the world manufacturing. Mr. T is a motivated and very capable worker that challenges himself to complete his projects in a professional manner. Scott has expertise in: -Troubleshooting and cost solutions -Concept design of equipment and workplaces -Six Sigma and other principles of lean manufacturing Along with manufacturing, Scott is always striving to improve himself as a professional. Feel free to contact him for various ventures, small and large, that will increase his experience as an engineer.
Summary of Achievements: 1988 - Started playing at a hardware start-up when I was 3, my Dad started his first company in our bedroom. I learned (the hard way) how to hold a soldering iron by holding it the wrong way (hot side) first. 2003 - Designed my first PCB at age 17. 2004 - Received Diploma in Industrial Electronics 2005 - Co-founded an Engineering Design firm during undergrad to help students develop Senior Design Projects. 2007 - Received Bachelors in Electronics. 2007- Joined a robotics start-up at IIT Mumbai: - Instructed at 19 Robotics workshop all across India in span of 1 year. - Lead a team to successfully design three educational robotics products, including the first Robotic Arm for educational purpose in India. 2009 - Elected as the President of the Indian Association (Rangoli) at University of Pennsylvania 2009 - Invented Tactile Gaming Vest - a Wearable Haptic Device to simulate Gun-shots, Bullet-wound, Blood-flow, Burning and Explosion effects
4 years experience in electrical power controls/design EIT. proficient with microsoft office products and auto cad 2d/3d drafting. linux/mac/windows. Designing control schematics, building cable schedules for electrical systems and interconnects, creating bills of materials, marking up schematics and making as built versions. Experience in wiring switchgear controls, DC motor controls, Motor control centers, manual/automatic transfer switches, synchronous panels, generator black-start controllers. Hands on experience field testing these systems. Studied NEC, IEC, DNV, AS3000, CSA code compliance
A full-pledged supplier quality engineer with a 5 year significant experience in a Hard Disk manufacturing industry, aiming to acquire a challenging position where my education, abilities and knowledge will be utilized to the utmost and to contribute to the growth and development of the organization where I'll be part of.
Seven plus years of strong technical experience in fracture mechanics, material modeling, computational plasticity, stress analysis, structural analysis, and other aspects of computational mechanics and materials science. ? Consulting experience for fatigue/fracture mechanics, material modeling and degradation evaluation, structural integrity and component flaw evaluation assessment and ABAQUS best -practices analysis workflow ? Considered an expert in fracture mechanics. Working as Fracture and Failure expert for more than 2years at Simulia. Proficient in performing LEFM/EPFM analysis (using handbook/analytical solutions, FEM). Performed J-T analysis, crack-growth evaluation, probabilistic fracture. Well versed in fracture mechanics literature. ? Strong technical knowledge and working skills in CAE techniques and widely known structural analysis software (ABAQUS/FRANC3D/fe-safe) using finite element models of varied complexity, in a variety of applications in static and dynami
An Electronics / Electrical Engineer, experienced in Fibre Optics, Training & QA. A lateral thinker & problem solver resulting in 3 Patents. Worked in Product Design, Research, Telecoms, FO Cable production & test, Calibration, Technical Writing esp training courses. Strong on multi-diciplinary science, physics, mechanics, chemistry.
Technologist (esp. formulations), Chemical Engineer, Project manager (chemistry, environment, renewables)
Dear Sir, Hereby I am Syed Barakathulla working as an Electrical Engineer for past 6 years 8 months. I am in charged on Operations and Maintenance of Power Stations and Sub Stations for Palace of H.H President UAE at Al-Yasat Island- UAE.
Having industrial experience of around 7 Years. Preparing New Drawing as per requirement. Detailing & Assembling Drawings of Machinery. Generating Bill Of Material as per Drawing. Technically understanding the application in Plants, collecting Technical Details, and providing Total Solution to End User in Plant.
Have working experience in R&D, space industry and digital consumer industry. Experienced and skill in lens design for camera module, telescope design for satellite?s camera and waveguide design in optical communication. Hand on skill in waveguide fabrication, fiber optics to waveguide coupling, optical metrology test and lens MTF test. Always demonstrate ?can do? attitude to overcome the challenge in daily task, has strong analytical and problem solving skill to support IQA, NPI and production team on the lens related and camera performance issue. Specialties: Optical design tool: Zemax (sequential and non sequential), LightTools Programming: Matlab, VBA Mechanical drawing: Pro/Engineer Lens MTF test: Trioptics Pro4, UMA DSC501 Photonics-waveguide design tools: WDM phase, OptiBPM
Effective in Drawings Skills and Abilities in Computer Aided Design (AutoCAD) 2D,3Dmax,ArchiCad,SketchUp8,Civil 3D,Cad Inventor,Land Desktop Cad (HVAC/Mechanical/Electrical/MEP/Architectural & Civil Engineering)
I'm currently studying for a Master's degree in Integrated Engineering, a discipline which harmonises the key aspects of mechanical and electrical design. To date, exercises such as lab experiments, case studies and design challenges have filled the bulk of my study time outside of exams, and my technical writing skills have developed immensely as a result. As part of my degree, I spent a year in industry working with Instron; a manufacturer of materials testing machines. My role involved developing test hardware and software for transducers and hydraulic actuators. These tasks developed my expertise in three software packages: SolidEdge, OrCAD and LabVIEW. I worked to strict time constraints within small teams. My engineering experiences have allowed me to explore the avenues surrounding one of my personal interests - electronic music. Along with becoming proficient in numerous software sequencers and synthesisers, I have built my own MIDI device with a simple USB interface.
Project management and systems engineering Proven ability to take business requirements, budgetary limitations and technical constraints and develop pragmatic solutions that maximize benefits to management and end-user communities. Technical experience in designing enterprise applications and intricate network environments. Strong reasoning and logical abilities to help define appropriate solutions to technical requirements. Extensive knowledge of application and network security requirements to protect business assets from exposure and misuse. Superior communications skills to integrate solutions across organizational levels, partners and vendors.
Haris is an automation systems engineer and a business graduate with diverse local and international experience. His interest in technology and a desire to constantly improve processes has become his key strength in designing industrial solutions. The ability to identify problems, come up with timely and cost effective solutions while delivering quality turn-key solutions makes him the preferred choice for providing engineering services across various industry sectors like Refrigeration, Food & Beverage, Chemicals, Pharma & Textile Industries. In addition to his technical skills, he takes keen interest in self development as well as imparting training to both industrial professionals and members of the academia.
I'm an engineer at heart. I love to design and create new things. I enjoy solving challenging problems. I'm very interested in solving the problem of inefficient collaboration within the construction industry (enter Buildbox). I enjoy teaching people. "Engineering is the art of modelling materials we do not wholly understand, into shapes we cannot precisely analyze so as to withstand forces we cannot properly assess, in such a way that the public has no reason to suspect the extent of our ignorance." -Dr AR Dykes
My long-term goals include becoming a materials engineer, and improving the world around me in any way I can.
??? Mechanical product design of components, sub-systems and systems level ??? Excellent understanding of materials, processes and finishing operations. ??? Expertise in GD & T, Tolerance stack up, DFMEA and Concept Selection Metrics ??? Exposure to manufacturing environment. ??? Experience product performance/reliability/prototyping and testing. ??? A deep understanding of plastics, S/M, Packaging processes. ??? Knowledge of NPD or change management process ??? Leadership skills. ??? Exposure to engineering services industry.
Profile at a glance: Strong valuable experience in Hardware Research / Product Development / Product Life cycle Management (PLM- Windchill, Agile, SAP) / Engineering change management (PCN, PCO, PCR) / Bill of material management (E-BOM, M-BOM) / Compliances (Rohs, Reach) Management / Component end of life management (EOL) / Vendor management / Maker -Vendor ( MCO) management / Product management / Planning & Scheduling / Plan & Policy Making /End to end implementation/ Bio medical equipment sales & Service.
Mechanical engineer with a masters degree and 15 year experience in aero gas turbines, seeking a new creative challenge within the wider machine design field.
Pipeline fabrications and training of 6 G welders Oil and gas, Building & Plant Maintenance Services Reverse Alignment on rotating equipment Condition monitoring Spare Equipment installation, testing and commissioning Parts and Equipment sourcing
I am a design engiineer with experience developing and launching products for production. I have busiiness planning, patent expertise, CAD expertise and experience designing control systems, electronics, metal, plastics, cooking, heating, and electronic sensors for a wide range of industries including agriculture, consumer goods, industrial, oil and gas, pharmaceutical, automotive and environmental clean up.
Experienced, dynamic and focused digital and analog design engineer looking to advance in the electrical engineering field working in a competitive environment that applies analytic digital and analog skillfulness in challenging assignments.
11 years experience in Planing, Implementing and Managing Supply Chains. Studying clients demands and existing Supply Chain, Planing Optimal Supply Chains. Matching Suitable Vendors and Service providers. Managing Schedules and Budgets. Specialties:Supply Chain Planing. Supply Chain Management.
Talented mechanical design draftsman with a comprehensive understanding of design processes and also manufacturing and construction methods. Experienced in all the design stages of a product, including research, development and manufacture. Hard and reliable worker, my work is appreciated for my ability to offer innovative solutions. Area of expertise: ?? Computer Aided Design ?? Parametric model ?? CAD simulation ?? Production of drawing ?? Strength of materials ?? Electro-mechanical products
Contact Information (Phone: 610-653-4253 or E-mail: firstname.lastname@example.org) Results/goal-oriented individual with more than ten years experience in Manufacturing, Materials and Supply chain management. Managed and worked with R&D in new product design, development and introduction. Solid commodity knowledge and expertise in electronics, metal, optics, plastics, & electro mechanical assemblies. Global Strategic sourcing and outsourcing/contract manufacturing expertise in low cost regions such as China, India, Malaysia and Eastern Europe. Excellent negotiation skills and proven cost reduction track record. Able to create Bill of Materials (BOM), read/understand electronic & mechanical drawings. Lean inventory management, production planning, purchasing, project management, logistics and Oracle ERP systems background.
I am a vibrant Mechanical Engineer who pays attention to deals and always on a look out for organizations where i can contribute positively towards the growth and development of the organisation as well as career development. I use the fundamentals of Engineering to solve problems which affect man in his immediate environment. Am also a good team player and proficient in the use of Auto-cad, Microsoft project, Microsoft office etc. I have experience(s) in the following areas Project Management, Plant Engineering, Business Analysis, Technical Assistant, Technical Support, Planner etc. I am an Engineer who can fits into any role in which i find myself. Am a hardworking and dedicated individual who believes in Engineering ethics and practices. I am a member of British Project Professionals.
Results-oriented, methodical, hands-on professional with experience in design engineering of various electromechanical products, and teaching at both the high school and community college levels. Strengths include problem-solving skills, mechanical and electrical competence, strong team player, attention to detail, extremely fast learner, and organization.
?? Modeling the heat treating machine according to the client requirements using Catia V5. ?? Involving in creation & deletion of Assembly in Enovia. ?? And involving in transfer of Assembly to customer through Enovia. ?? Preparation of bill of materials and balloon generation. ?? Modeling and assembling the parts from the drawing (i.e. using STA, BL, and WL). ?? Resolving the technical Issues to team while conversion and Quality check of data before delivering to customer ?? Developing sub parts as per drawing specification. ?? Interacting with customer on technical and account issues on weekly basis ?? Modeling, Assembly, Detailing & Drafting using CATIA V5 ?? Making 3-D models from 2-D drawings and creating child part drawings from 3-D assembly. ?? Concept Design work and product development for Automotive Components ?? Defining the Functional Groups and Technical attributes by interacting with various Design groups in PD ?? Documentation of overall product aggregate
SolidWorks Expert Auto Cad Highly Professional Communicative I am a certificate SolidWorks expert with experience in 2D and 3D modelling. I am highly professional and responsible.
I have M.Sc in Computational mechanics of materials and structures. I have a strong theoretical background on computational aspects of Mechanics such as Material Modeling, Numerical Solutions, Finite Element Method (FEM) and Materials Science. I have several years of experience in Finite Element Analysis (FEA). I am expert in Performing static, modal and buckling analysis Analytical calculation and validation for fasteners Optimization and validation of Design Result evaluation Writing short and detailed stress report I got valuable experience of using following FE packages PATRAN/NASTRAN, ABAQUS ANSYS HYPERMESH SOLIDWORKS by working on different projects in university of Stuttgart Germany and Airbus Germany. In addition I also have industrial experience of working with AutoCAD and Solid edge.
I am seeking a position utilizing the following skills: More than 29 years of Mechanical design/drafting/research and development, utilizing various CAD software packages (Unigraphics II V9 ? NX8, SolidWorks 2009 Plus w/Cosmos FEA, AutoCAD, Catia V5R, Right Hemisphere, ExpertCAD, Discus ) with complex creation in 3D solid formats, highly competent in innovative new product design, detailing, as well as advanced studies/layouts in the aerospace (per FAA requirements), medical, and food service industries (per FDA requirements). Other experiences included department management, project management, cost reduction methods, manufacturing engineering / liaison, close quality control interaction, NC programming, 3D parts replacement procedures / manuals, as well as an extensive computer networking background. I am a very self-disciplined hard working individual and have worked out of my home as well. I have licenses with many CAD software companies.
I am a Mechanical Product Designer and Certified SolidWorks Professional, with expertise in mechanical part design including sheet metal, plastics, complex assemblies and producing manufacturing drawings. I hold a 1st class MEng Hons Product Design Engineering degree. I have key interests in consumer and healthcare products and in utilizing sustainable design approaches.
Mechanical Engineer Designer/Analyst.
Over 17 years of experience as a Printed Circuit Board designer. Cadence Allegro, Altium Designer and PCAD-2006 tool experience. Extensive and diversified layout experience spanning the medical, telecommunications, power supply, military communications, and fiber optics industries. Excellent communication and research skills. Fast, productive, and highly accurate. . Worked with a small team of engineers developing the next generation electronics for the MoFlo cell sorter. Specialties: Cadence Allegro Layout Altium Designer PCAD Layout High Speed High Power Wireless EMI
My name is Eddi Maevski, I have M.Sc. degree in mechanical engineering, with 3 years of experience in mechanical design and development. Proficient in Solidworks, simulation and FEA. Broad knowledge of manufacturing technologies: machining, milling, sheet metal, welding and general metal works. During my work i've designed parts for injection molding, rim, vacuum forming, extrusion and different types of metal castings. I will provide high quality deliverables in strict schedule and budget for your project success and your satisfaction.
I?m a Mechanical Engineer professional and would like to be considered for any mechanical engineering opportunities. Throughout my career in the manufacturing and design industry I have been known for my abilities to quickly learn and adjust easily to any project or demand. Along with 20 years of engineering experience, our company offers 20+ years experience assisting customers in any of the following: 1- 3D SolidWorks Modeler and 2D CAD 2- Statics, Dynamic loading analysis 3- Thermodynamics and fluid power design 4 - Acoustic and vibration analysis 5 - Experience in product and tooling design/development 6- Experience in the medical device industry 7- Experience with injection molding tooling design 8- Hands-on experience troubleshooting new prototypes 9 - Experience programming automation robotics using C++ code 10- Experience performing six sigma, scientific method, and Demaic methodologies to eliminate waste Visit us at: www.soliddesign123.com
I am a Mechanical Engineer doing job as a Design Engineer. having more than six year Experience. Expertise in Special purpose machine design which is not available in market these machine used for increasing the productivity so that companies can increase there productivity and safe there time and labor cost. I am also design pneumatic circuit for pneumatic operated machine...
Mr. Dela Cruz, with his more than 8 years of experience as an engineer and a CAD consultant in 3D Mechanical, Structural & BIM software has helped companies to increase productivity and design quality by implementing 3D CAD software on their conceptualization and design stage. His ability to train his fellow engineers, implement drawing standard and create extensive libraries has helped his current and previous employers gain the benefits of adapting atechnology. Early on his career, he worked as an Applications Engineer for 3D CAD software, where he provides presentation, consultation, conduct training and seminars to hundreds of companies regarding this technology. In the entire duration of his career, he has implemented this technology on the design of mining industries, OEM manufactures, AEC & fabricators. Just recently, he has successfully finished a couple of projects from his previous company that uses 3D technology. The projects are Dewatering Station, Pumps, etc...
I'm familiar with 3D design, workshop and erection documentation for huge and complex projects with weight over 600t.
I am an electronics design engineer and project manager. I have design experience with digital and analogue electronics, micro-controllers, embedded software, FPGAs, VHDL and PCB layout. I have project management experience in hardware and software engineering, and in the building industry. I can also provide self development coaching.
At Io Design we are passionate about industrial design. We take a macro approach to each project placing emphasis on target markets, competitive analysis, innovation, manufacturability, lifecycles, and price points. These and other considerations coalesce into a design language that makes your product unique, pertinent, and targeted in the marketplace. Our specialty in computer modeling and rendering enables the design process through accurate visualization using eDrawings and ease of refinement of your product. The computer models we produce provide a basis for prototyping and production ensuring consistency throughout the product development process. We also produce photorealistic images for marketing, advertising, and sales. At Io Design we know that our clients success ensures our own. Our passion, macro approach, and unique skills provide a basis for that joint success.
I am an architect providing services in architectural and interior design, photo-realistic and conceptual 3D visualizations. By doing it professionally, fast and cost-effective, I deliver high quality material for clients, as well as my own, pleasure. Highly experienced in AutoCAD, ArchiCAD, Cinema 4D, Photoshop and Corel Draw to develop presentations, rendering and 3-D illustrations and animations. I'm interested in different types of work such as 2d drafting and 3d modeling of architectural, interior design and landscape design projects.
Professional estimator and 3D expert have vast knowledge on structural and architectural project in abroad such as UAE (DUBAI) & QATAR.Working in Elance for best quality and100% satisfactory of clients by fair price .I've sound knowledge on AUTO CAD/ 3D STUDIO MAX/COREL DRAW/ PHOTOSHOP/ILLUSTRATOR/MS EXCEL/MS WORD/ESTIMATION OR QUANTITY TAKE OFF. Over the last four years of my working period I've earned the following experience: 1) Building's Architecture and Structure design preparing as per code (2D & 3D) 2) Materials quantity takeoff (Concrete,form work,reinforcement,anchor bolt etc) and bill of Quantity (BOQ) preparing. 3) 3D Modeling,Rendering and Animation works of residential,commercial,industrial,duplex buildings and factory products. 4) 2D floor plan, Elevation and Section (Auto CAD) design. 5) I can prepare building's Structure drawing (Pile,Footing,Column,Beam,GB,Bar Bending Schedule-BBS,Under Ground Water Reservoir,Cavity wall's Plan etc.
I have 18 years of experience. I designed the multi-channel measuring amplifiers for strain - force in material, temperature and pH. I designed microcontroller devices based on Motorola's 11 and S12. I programmed in the C programming language. I also made programs for the PLC Moeller(-Eaton now ) with programming in IEC standard(CoDeSys). I worked for the modernization of laboratory equipment in the rubber industry - Testing Machine, rheometar, viskometar, extruder. For these devices, I programmed in VB6, C #, SQL. I have enough experience to be able to write the design documentation for electrical part of machines and smaller production place.
Over the last 5 years in my experience, I have developed many different types of Auto CAD drawings for Civil engineering, mechanical and boat design and etc. My work is to become real the people ideas, for that reason, every single project is for me a challenge. I also have some experience in 3D animations and Graphics designs, I use Auto CAD, Solid works and Rhino For my workings. My effort is to give you a 100% satisfaction work for my clients. You can view some sample of my works http://aoo3dcad.blogspot.com/
I am provider of best engineering solutions right from development to manufacturing and i am in this field from last 10 years. I have worked with big industrial giants and fortune 500 companies in my past. And presently I am working as a CNC Programming Head in T.K. Engineering Solutions a subsidiary of Russel Metal US.
I can offer you my 10 years' experience in Strength Analysis, PhD in Technical Sciences.
Accurate, honest and fast. Willing to take on any project big or small. Please get in touch to see the latest samples of my work.
Architectural design, drawing & visualization, animation, graphic design.
PPi3D is a strategic product design consultancy. We bring our clients closer to their customers by understanding people, the products they use and the context in which they use them.
Seven years of experience in computer aided drafting, Including Vector and Raster graphics, parametric and solid modeling, Bill of Materials, document control and production support
I have worked in the timber frame and structural insulated panel industry for 14 years. I spent several years prior in a timber frame hand cutting shop where I leaned first hand traditional mortise and tenon joinery design and techniques. I've spent the last 13 years specializing in design, estimating, project management and all drafting aspects of timber frame and structural insulated panel homes including steel design and shop drawings.
I am a 3D designer with ten years of experience in this area. My main professional fields are: product design, furniture design and design of POS materials. As well as design and visualization of different advertising constructions, from selling stands to big lounge zones or exhibition stands. During my career I made projects for such big companies as Samsung, LG Electronics, Nestle, Coca-Cola, MasterCard, Procter & Gamble and others. To see my portfolio please visit my website osh-design.com Or behance: www.behance.net/Olha_Shevchenko
He is specilized in the thermal analysis, design, development, and troubleshooting of cooling/heating/flow equipment/systems to include heat exchanger design, thermal system design and optimization, fluid mechanics (to include gas/air filter systems, compressible flows%u2014internal and external, piping systems, gas systems, etc) and convection/conduction/radiation/porous media heat transfer, and other cooling of technologies for all industries to include aerospaca, automotive, power, electronics, etc. Furthermore, he is also an expert in thermal management analysis and development for electronics and telecommunications thermal management systems using analytical, experimental and numerical techniques, including state-of-the-art tools, phase change materials, exothermic/endothermic materials, thermoelectrics, etc. Moreover, . He has also assisted in legal engineering-related cases in patent and product liability cases to include prior art search and other matters.
Founded on the spirit of innovation, scientific principles and creating something which is truly useful, LAT28 Design (http://lat28design.com/) seeks to create quality products which re-define the everyday accessory. We only invest our resources in products we believe in and want to use ourselves. When we create a product, we go all-out: the best engineering, best materials, and best manufacturing practices available. We strive to blur the line between design and function..
For more than 30 years I have been providing engineering and project management services to small businesses and Fortune 500 companies alike. I can handle everything from start to finish, from conception, design, project planning, supplier selection, prototype management, materials acquisition, staging and fabrication, assembly method outline sheets as well as change control. I provide manufacturing support in the form of fabrication drawings and technical specification documents.
Established in Aug 1996 & ISO 9001:2000 certified, Silicon Meadows offers a range of products and services in the field of auto components to automotive tool design. Silicon Meadows is leading group in the area of tool design and targeting the engineering services domain in India as well as overseas market. Our group is rapidly growing engineering center, expanding its business with tool designing & automobile component design and has the escalating base of engineers doing design work for global automotive customers. We are using best of our expertise to expand into new product development and service areas, aiming to be amongst the leading engineering services in the world. We have expertise in the area of CAD, CAE and tool design using updated tools like CATIA, PRO/E, UG, Inventor, Auto CAD, LS-Dyna and Hyperworks for complete product development.
14 years experience. 3D modeling with Proe, production engineering, rapid prototypes, applied graphics, ergonomics, and control surface design of consumer and professional products. Plastic matirial adn injection moulding Proe solid an surface design Automotive and scooter experience Prototype development Gadget and packaging design
967- 713427082 967 773035620 Job Application Dear Mr . . .: I am industrial engineer and I have more three years experience. I have been working as the Preventive Maintenance Engineer for National Dairy and Food Company(NADFOOD) Hael Saeed Anam group . I've been looking for work as a maintenance Engineer, Planning Engineer, Production Engineer , I sure I am well qualified and have enough experience t to work in these fields which also related to my major, also I can work in other job in condition related to my major. I am well qualified in designing, developing, maintenance planning, and evaluating integrated systems for managing industrial production processes, which include human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination. I am well in using SAP System ,CMMS &Primavera Program . I look forward to hearing from you soon. Yours Sincerely,,,
Provider of CAD design services for mechanical parts and assemblies. Send us your sketch, concept or photographs and we provide a solid model and drawings of your part and assembly.
Today's market trends are dictating that software development: - be partitioned to allow outsourcing and offshoring. - utilize the services of engineering specialist for improved effectiveness - utilize experienced engineers for improved efficiency To meet these trends, using experienced engineering specialists at key points during the Software Development Life-Cycle (SDLC) will not only meet objectives but lower overall development costs for clients. By offering a suite of services that span the complete SDLC while backed by 28 years managing, designing and developing real-time embedded software, I provide results that helps meet your development goals on time, within budget and meet all expectations.
We provide complete Auto CAD services in the following general areas: Detail Auto CAD work : : Architectural Drawing & Design : Interior Drawing & Design : Raster to vector conversion of Maps : Stone Carving Drawing & Designs Working Experience : 17 years experience in Auto CAD (DOS Version 10, 12 and Windows Version 13, 14 & 2000 TO 2012) preparation of Architectural, Interior and structural drawings for Commercial, Industrial, Residential Buildings, and Irrigation Structures.
I am an engineer trained in all aspects of audio technology. I have professional experience in large scale production and studio facilities. My duties have included operating a mixing console for sporting events and drama as well as the editing and mixing recorded material. My technical training is paired with a highly artistic background. I have worked closely with musicians during the recording and editing process to achieve the desired final product for the client. I have full certification in Pro Tools HD as well as experience in other digital audio workstations. I am also a practiced musician with extensive knowledge in MIDI protocol and related devices. I am a resourceful problem solver and an eager learner. My strong work ethic would serve as a great asset to any team!
A highly proficient Industrial Design who truly understands Market trends. I specialize in new product innovation and brand development. Helping organizations of all sizes to design, engineer, prototype, develop, and bring their visions to reality. My skill sets include a wide array of abilities in the product development field that can take any idea or direction to final manufactured goods on shelves. My process includes all aspects of design and development from research all the way through to artistic concepts, CAD modeling, engineering, prototyping, manufacturing and branding direction. With this diversity I bring a level of knowledge and insight that should be invaluable to any company.
If you would like high quality work with a first turn around for a fair price,contact me.You won't be disappointed . I enjoy working on all kinds of Mechanical & others Auto-Cad (2D & 3D) drawing.I'm capable of flowing strict direction as well as conceptualizing solution that will work for you.
Machine designer with 18 years of continuous experience in Canada, previously structural drafting and design in Italy. Advanced level in Autodesk Inventor, Solidworks and Autocad.
Architecture is the art and science of designing buildings and other spaces to be occupied or used by people-science, because architects have to understand the physical characteristics of the building materials they include in their designs, as well as the physics of the structural designs themselves; and art, because architects typically try to utilize aesthetic principles at the same time as they're trying to meet human needs via their designs........ANY HELP YOU WANT PLEASE CONTACT ME AND FEEL FREE TO ASK ANYTHING YOU WANT,,,,THANKS...WE CAN MAKE YOUR DREAM COMES TRUE.
The business relationship usually starts with the client describing the invention that needs development or the electrical engineering problem that must be solved. Every project is unique because the clients are unique. But, the projects are the same because they follow this path: 1. Definition of the problem / project / invention. 2. Engineer the solution. 3. Build the solution. 4. Test the solution. 5. Document the solution. 6. Support for years afterword.
A Qualified Quantity Surveyor more than four years experience in pre and post contract phases. Having Experience in projects ranging from Infrastructure- High rise buildings, Office Building, Commercial Buildings, roads and power plant in India. Four (04) years of Experience in Contract Administration & Quantity Surveying such as Interpretation of Contract, Identification of rights & obligations, Review of contractual letters and initiation of its draft, Preparation of Pre-Bid Queries, Preparation & Evaluation of Claims, formulation of Subcontract Agreement, Evaluation/Preparation of Time and Cost impact using M S Projects, Negotiation with vendors, Settlement of disputes with Subcontractors, Identification of Variation / Change Orders, Estimation & reconciliation of materials, Coordinating & Monitoring of construction activities with Project Schedule.
I am a recent graduate from Iowa State University (2007). I studied Mechanical Engineering and Industrial Technology. I have been working in industry for three years, and am currently working as a Cell Coordinator for two production cells composed of more than 30 CNC machining centers and robots. I have knowledge of material management, human resources, training, waste reduction, budgets and planning, steps to production, and process development. Some of my secondary skills involve gage calibration, repair, and use, as well as inspection control plan development. As an Engineering student at ISU, I had the opportunity to work on many design projects. I do not have opportunities to use my design knowledge since I work for a contract manufacturer, and fixture design is currently done by members of our tech support staff. Design projects would be of great interest to me.
jbnIT is your source for everything I.T. From outsourced management, project management, website design, graphic design for print and web, audits to network engineering and architecture. With over 15 years experience in multiple industries, jbnIT has the ability to help you with your IT and graphic needs. Call today - 240-233-3146 or send an email to email@example.com
Years of experience in architecture and mastery of detailed design is essential in every work and that is what I possess and what should be given to the client. I am a gifted architectural designer with creative artwork and a great experience in architecture and other related engineering fields, with the use of 3D softwares I can surely produce a design product that meets the clients needs with utmost confidence. If you accept me as your architectural designer/draftsperson I will always consider every project not only as a job but a passion to deliver a best quality of design.
I'm a licensed US primary care physician passionate about, and trained in, the design of innovative nutritional supplements -from conception and formulation, to sourcing, manufacture, and marketing. I practice integrated family medicine, teach college sciences, and regularly travel abroad to source and study medicinal herbs. My passion is botanical medicine and I offer expertise in the creation of effective novel nutritional supplements. Services: -Nutritional supplement formulation - Herbal material sourcing - Research & Substantiation - Interface with manufacturers - Copy ,White-papers, Fact Sheets I have lived and worked throughout the the world with direct experience in Australia, Central America, South America, India, Southeast Asia, and Middle East. Past experiences include family practice (USA) ,medical direction of a VIP health center in Abu Dhabi, UAE and head of research & development for a major US nutritional supplement manufacturer (Irwin Naturals).
W Designs - Building Technologist Specialist TECHNOLOGY, ARCHITECTURAL & ENGINEERING SKILLS - Microsoft Office; AutoCAD, AutoCAD Architecture, and Revit. - Working experience creating spreadsheets and databases - Civil technology, Construction surveying - Materials, Applications and specifications - Building electrical design, Building lighting design - Graphical communication, Building technology EDUCATION - Applied Science Diploma, Architectural & Engineering Technology Thompson Rivers University, British Columbia - Canada Bachelor of Science, Mathematics
Studied in Architecture and had a special aptitude on Architecture relevant Software like REVIT Architecture, AutoCAD, SketchUp, Vray. Now work as a faculty in the Department of Architecture, Southeast University, Dhaka, Bangladesh.
Experienced project engineer with industrial, commercial, and retail design experience. Advanced knowledge in additive manufacturing (3d printing) for prototyping and manufacturing tooling applications.
Over 8 years of experience in the Electrical Engineering on Electrical Panel, Switch gear, control & power distribution, Electrical Plan, Schematic Drawing, Wiring Diagram, Layout, etc by- Eplan Pro Panel & Eplan Electric P8- Electrical Panel drawing, design, Engineering Software. Auto CAD-Computer Aided Design Software for Plant Layout and Single Line Diagram (SLD)
Chemical engineering and other technical team members have Process Safety, Process and Plant experience relevant to the client's processes. They work together organize Engineering Project format to develop basic chemical engineering data, including: ?? Battery limits plant concept and process philosophy ?? Unit operations and major process equipment ?? Process flow diagrams ?? Piping diagrams and lists ?? Process chemistry analysis. ?? Raw material specifications ?? Heat and mass balances ?? Simulation modeling as needed (Aspen or other) ?? Final product specifications and quality metrics ?? Plant testing and test methods protocols ?? Utility needs and flow diagram ?? Waste product characterization and treatment ?? Early design stage process hazard review ?? Regulatory standards compliance. ?? Chemical Process Safety Management. ?? Hazardous Zone Classifications. ?? Plant Design Economy. ?? Fire Protections Design. ?? Food Packaging Plant (GMP).