I am an experienced CAD Designer, working in mechanical and chemical engineering areas as well as industrial design. I have done several projects for the Oil and Refining industry, Environmental Engineering (Waste to energy plants)and Product design from technical drawings, full engineering documentation, 3D modeling, structural analysis for pipeline systems, industrial equipment and others. I also am certified and have worked in Project Management for the same industries providing from scheduling to full project management services. I always meet deadlines and quality demands!
Our 30 years of professional experience, in Product Design, Development, and Manufacturing, combined with our hands on knowledge of the Aerospace, Automotive, and Consumer Product fields, provides us with the expertise and knowhow to bring Ideas to life.
KOBALT it begins here... Architecture begins with an idea, a flawless spark of both creativity and need. We nurture that idea and through proper execution results are the consequence. KOBALT architects place the client at the centre of the creative process and unlock the potential of every opportunity through collaboration with our clients and other stakeholders. Our design approach results in sustainable architectural solutions based on key ethical principles and our workshop culture stimulates creative thinking and maintains the integrity of the design. hire KOBALT through Elance for all of your project needs during its different stages: idea, conceptual, rough design, rendering, blue prints, landscape architecture, elevations, structural engineering, delivery, follow-up.
My name is Francesco Gorini and I have over 10 years experience in Industrial Design. I always have worked in research and development departments for big companies. I have experience in various sectors, including: Kitchen Furniture, Bar Furniture, Ice Cream Cabinet, Steel Furniture. ------------------------------------------------------o--o-------------------------------------------------- I am new to Elance and I might seem inexperienced in my work, but it is not so! To gain your confidence, I say:" money back guaranteed "
30 years of experience in developing consumer, automotive and professional audio products for OEM and brand names alike. I am a driver design specialist. I've done everything from 1 inch tweeters and compression drivers to subwoofers that could take 10,000 watt peaks. I've experience in setting up production lines, quality control stations, tooling for production, and I've built hundreds of prototypes of all kinds. I can develop powered or passive systems as per your specification and timeline. Passive crossovers with protection are also a specialty. If I cannot help you, I'll find someone who can. My partial resume below, a full one available to see on linked in at http://www.linkedin.com/in/paulapollonio
I have engaged in mechanical design service for industrial equipment for several years. My specialization is in equipment such as pressure vessels, heat exchangers, tanks, steel structures, machine/mechanism design etc. Familiar with international codes such as ASME VIII/1, TEMA , API-650 and standards such as ISO, ANSI, DIN, JIS, BS etc. Proficient in technical CAD drafting (AutoCAD, Inventor, Solidworks) for fabrication/production purposes. I could be work as alone or in teams depend on the job scale. In large project I might work with my team to satisfy schedule or join with your existing teams - that is not a problem for me. I have offline team consist of engineers and drafters. They are proffesionals in their fields as I am, which work in freelance basis in their spare time. I could arrange them for your project if needed under my coordination and responsibility.
Product Development,Plastic Design,Rapid Prototyping & Tooling Feasibility,Gap & Flush Design, A-surface Development,Parametric Modeling,Remastering,Vehicle Packaging. Domain Expertise : Plastic Design and Sheetmetal. Tools Expertise : CATIA V5,Team Center Engineering,VisMockup. 2+ Years of Domain Experience
I have experience The technology of coextrusion in the individual production. ERP system. Automated production equipment. Lean. Coextrusion technology nylon, polyethylene, polypropylene, ethylene. Manufacture of nylon-oriented multilayer films method of double-bubble. Technology shrink bags of plastics. Design of coextrusion dies, screw design. Technology of multilayer containers (bottles) of polyethylene and polypropylene. Production of plastic windows. Analysis of the data in Excel.
Civil engineering - 12 years Structural Drafting - 8 years Architectural & Interior Design -4 year AutoCAD - 10 years Estimating - 1 year
I'm specialized in: - Autocad 2D - Catia 3D V5R10 (part design, generative shape design, sketch design, assambly, sheet metal) - Corel Draw - Adobe Photoshop
We are group of companies specializing in all kind of metal works. We have in-house facility of CNC machining centers, CNC lath machining centers, die casting, die making, sheet metal works, wire cutting and gear manufacturing. We primarily produce motor bike engines. Honda is one of our vendors in this sector. In addition to that, we also produce metal embedded rubber parts like truck mountings. We are supplier of Bedford and some other renowned names. We are also capable of rubber, plastic injection molding and other rubber items like sole for shoes. We are highly interested in high production jobs and can give special low rates with a guarantee of high quality. Our jobs are highly precise and accurate. We are also interested in long term permanent affiliation as vendors. In short, what ever work you need in metal, we are one stop shop!!
Easygoing, professional person who likes to overcome challenges. Experience in CAD/CAM/CAE/FEA, machining processes and automotive related manufacture processes.
I am strong experienced Electrical professional with 7+ years of experience in below mention area. Preparation of documents & manufacturing drawings for VFD Panels, PLC Panels ,MCC Panels ,PCC Panels, LT panels, JBs, ACDB systems, Lighting panels and control desks which includes preparation of single line diagram, G.A. drawings, power distribution scheme and typical control scheme. Discuss with customers during implementation and design of the new complex services, understanding complicated problems resulted in successful issue resolution Providing technical reports and documentation, according to company standards. Identifying and developing a reliable Vendor base across India for procurement of critical engineering specifications. Helping and consulting with other team members in resolving unusual and complicated problems related to new development, production support and testing.
Currently I am working in energy field, have strong background in Mechanics as well as in Electronics.
CSWE SolidWorks Design Engineer
I Have over than Nine (9) years experiences as Structural and Civil Designer + Drafting for Big scale of various sector projects. Key of Competences : o Design + detailing o 3D Modeling o Structure analysis o Foundation Design o Drafting. o Material Take Off. o Finishing / Architectural detailing - Industrial Building Industry experiences : Factory and Industrial plant, Mining and Material Handling (Nickel, Coal, and Gold), Onshore oil and gas station, Gas pipeline, Infrastructure, Tower Building, Office and Residential, and some experiences in Power plant projects.
We specialize in Short Circuit & Coordination Studies, Equipment Evaluation, Arc Flash Studies, Power Factor Correction and Harmonic Analysis for Power Distribution Systems. PSCi provides Electrical Design and Service Planning including drawings, load analysis, and calculations to size cables, conduits, transformers, protective devices, panels and low resistance grounding systems. Although new to ELANCE, James Montgomery (A US Citizen & Owner) is a Registered PE with over 20 years of experience in electric power distribution system design, planning, maintenance and study analysis. He has a utility Background in 13-35KV Distribution Planning, Low Voltage Underground Network Design, Pad-mounted Transformer installations, OH/UG/URD Primary Line Extension, Electric Service Planning, Grounding Design and drawing development.
We are a civil and construction based company in the Caribbean. We pride ourselves in our work ethics which include affordability of services while meeting or exceeding standards, quality and deadlines. Our willingness to firsty serve our clients surpasses the emphasis on money making, developing and promoting our good name is of paramount importance.
We offer comprehensive professional services, but also something more... Because we represent a wide variety of professional perspectives and experiences, and because we routinely consult with one another, we can handle complex challenges more readily than other firms. We deliver unexpected insights, solve unforeseen problems, and often create work that achieves even more than our clients imagined. Our team consists of specialist: Architects Interiors Designers Furniture Designers Landscape Designers Buildings should serve a higher purpose. At NSpace we believe great architecture shapes the human experience, improves the quality of the built environment and helps conserve the earth's resources. Our goal always is to cut through the complexity to make life easier and better for people. Truly creative designs go far beyond the look and feel, and are based on a complex set of criteria.
I'm a Mechanical Engineer who specializes into the design of Electromechanical installations for buildings. Today detailed design of Electromechanical building services is a necessity. Every project I undertake is treated with respect to clients needs. Sustainability, energy saving, cost effective solutions, are the main aspects of a successful project. My goal is, my designs turn into installations of high quality which they will make our daylife easy.
MEng in Mechanical Engineering at Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia. Experienced with mechanical design, product design, 3D modeling and drafting, welded structures design and calculation, FEM analysis. Over 3+ years experience in Mechanical Design department in Croatian largest engineering company - Koncar d.d. (http://www.koncar.com/)
Skilled and versatile Aerospace Engineer with over 6 years of experience within Aerospace and Automotive sectors in Europe, America, and Asia-Pacific. I possess strong Computer-Aided Design and Drafting skills, having worked as CAD Designer and Project Engineer for prestigious companies which rank among the elite of European Spacecraft Manufacturers and Automotive Industries. My ensuing experience at one of the leading American Airlines helped me become an extremely capable and accomplished professional in the field of Aircraft Structures, Systems and Interiors Engineering. My latest assignment as Aviation Lecturer for a leading Singaporean Training Organization partner of major Universities in London, Melbourne and Sydney further reinforced my Aerospace background, putting me in contact with many of the world's biggest Maintenance, Repair and Overhaul Providers and the most prominent Aircraft and Systems Firms in the world.
I have over 9 years of experience in civil engineering field including major projects in Sri Lanka (including southern expressway) and State of Qatar. I have skill and knowledge to handle civil engineering quantity surveying/ estimating jobs and CAD drafting jobs properly.
Well-known using Pro/Engineer, Ansys, implement Technical Drawing Standard, Manufacturing Process and Material Science Engineering into Mechanical Design. I provide significant cost saving and time saving services on the bases of your requirements.
I have over the past 19 years worked in the following industries: tabacco plastics metals automotive pharmaceutical wood paper mills aluminum extrusion mills holographics chemicals Work performed: PLC control systems design Machine controls design and programming to meet the clients specific needs. Paper Mill Machinery, Tampon makers Make-up Processing, Foil Bag welding and printing Colostomy seal maker, Styrofoam cup Foam cutters, Cigarette Making and Processing Machinery Lens grinding equipment, Forklifts controls Robotics packaging, Chemical Process Controls PLC and PC programming for machinery and plant processes. Chemical plants system programming I design new products and processes for all types of industries.
Professional, fast and accurate design and drafting services.
I have been working in product design for the past 10 years. My designs have included mountain bike disc brake systems, full ATV design, 4 stroke engine design, mountain bike suspension design, ATV suspension design and medical product design. I have designed forgings, castings and injection molded parts. I have worked extensively with exotic Aluminum and Magnesium materials as well as Amorphous Glass alloys. I have over 18,000 hours of Pro/Engineer and mechanica experience. I have done many designs from a napkin sketch, through prototype, through testing, into production. I also have experience managing teams through fast paced projects meeting tight deadlines.
Dedicated and innovative professional offering experience of over 15 years in the planning, operations, staffing and performance improvement in Indian Navy. Can be headhunted for spearheading the efforts across reputed organisations as an Assistant Manager/Senior Manager (Production/Operations Management/Fire Safety and Security) to achieve management vision & goals in planned and stipulated time frame by capitalizing on my competencies and vast practical experience in the best possible way.
Over 23 years of experience in various disciplines , including Mechanical/piping industrial plant design, Architectural and Materials handling. Versatile, professional, reliable and dedicated to providing customer satisfaction through quality and precise work.
WORK EXPERIENCE: JUNIOR ENGINEER, AT JV CIV-TECH ASSOCIATES & EPAC CONSULTANTS PESHAWAR PAKISTAN , HEAD OFFICE. July 2011 Present TECHNICAL SKILLS: Engineering Softwares: AutoCAD 3D Civil Primavera SAP 2000 MS Office HEC-RAS MS Project, Adobe Photoshop ETAB PROFESSIONAL SKILLS: Preparation of PC-1 , BOQ , Technical sanction ,Cost estimate ,Tender Documents , Checking Of Running Bills and Final Bills , Monthly progress Reports and compilation of different projects. Preparation of Technical Specifications) , Technical & Financial proposals Preparation Detail Design of Sewerage system. COMMUNITY MEMBERSHIPS: http://www.linkedin.com/profile/view?id=169428113&trk=tab_pro https://plus.google.com/communities/----4?hl=en http://www.the-blueprints.com/
A highly innovative, experienced, knowledgeable and licensed mechanical engineer who can provide technical leadership and guidance to solve for your mechanical product problems and meet your design/ development needs. I have product development experience using all metals including aluminum and titanium alloys as well as other materials to solve structural and mechanical component / subsystem design, analysis and testing challenges.
Im an Authorized Physical Person in civil engineering. For reference work please check my portfolio. There you can also find a recommendation letter from my former employer. As you can see from my resume, I have gained experience working in construction. The fact that I worked in various positions (construction worker, engineer trainee, sales consultant, design engineer) offers me a beneficial insight into the understanding of civil engineering tasks and duties. If you consider my professional experience adequate, please contact me with confidence.
Enip Concept is a company based in Ariana, borj Tunisia that offers a variety of design and drafting services. The owner and operator, Todd A. Pruden has an abundance of education and has over 10 years of design and drafting in both architecture and engineering. Todd continues to strive for the best quality services going up and above client expectations (references available upon request).
German Engineering Services in China. Good expirience in 3D modeling, product design, prototyping and product manufacturing. Quality Control of products manufacturing, Plastic- and Aluparts inection. 3D design and all industrial manufacturing files, production of prototypes and manufacturing. I am sure, that I find good answers for your question and good ways for development Your products.
I am a qualified Petroleum Engineer, (M.E Petroleum), I always focus in time completion of task as well as how to improve the practice with less time and expense, having experience in various disciplines of Petroleum Engineering in Production Operations, Work over Operations, Well Testing and Well Completions, Coiled Tubing, Wire line & Slick line Job, I can contribute to the growth of the company. A team leader with strong focus on Health, Safety & Environment
I am here to assist you in making high tech decisions. I utilize my practical hands on knowledge working with high technology and high tech companies, to assist you with; acquisition, design, production, and manufacturing of high technology products and processes. I can research and digest the techno-jargon into manageable information you can use. I am here to bridge the gap between you The Decision Maker. and the people you need to convey your message to. I can help you get the information you need.
CAD Professional skilled (10+years) in Industrial Design, Construction and Drafting Services, highly experienced with creating,analyse and presentation 3D models, including the right material effects and high quality rendering. I have a keen interest in anything 3d and also design for quite some time now. My areas of activity related to structural modeling and providing CAD Services for furniture,mechanical,plastic and 3Dprinted products. CNC routing and Laser-Cut programming are very familiar ground for me.
Inceptus is a premier design and manufacturing resource. We put the customer first, practice sudden service, and hold true to our values. We are always seeking improvement in everything we do. We have wide ranging experience in design and manufacturing of consumer products, sheetmetal, machined parts, injection molding, rubber molding, and more.
An engineering professional in the fields of mechanical engineering and R&D, with seven years of experience working for an international company. Specialties: - Machine design - Numerical methods (linear/nonlinear FEA) - Experimental mechanics - Dynamics of machines and structures - Multibody system dynamics - Scientific computing - Digital image correlation - Mechanical characterization of complex materials
We are an Engineering Visualization Company. We make films, not for Movies, Games or Entertainment, but for pure Engineering. We combine Complex Engineering Domain Knowledge with Sophisticated Visualization skills, to create Near-natural, Crisp and Effective films for Engineering Projects / Products / Processes / Organizations / Ideas. These films are used for either Marketing / Branding / Media / Client Communication or for Training / Planning / Archiving etc. We mix Animation & Videography as per the purpose and audience of the project and effectively communicate the story. In 6 years we have reputed clients like Larsen & Toubro, Tata Steel, Hindustan Construction Company, Ambuja Neotia, Century Ply, Koonix Ltd (Germany), Partha S Ghosh & Associates (Boston, USA) etc and received repeated projects from them.
I'm a Mechanical Engineer with more than 25 years of experience working with engineering softwares and tools. I can handle mechanical (HVAC), electrical & plumbing design, and estimates including load calculations, equipment selections and drawing preparations especially for vertical installations like multi-storey building, swimming pool, warehouses, hangars, supermalls, power plants, theaters, houses, condominium, offices and others. I believe that sharing my capability and experience will be a great help for future and modern technology of construction and installation.
SOFTWARE KNOWHOW Operating Systems : XP/vista/w7. Office Automation : MS Office and relevant packages FEA Tool : ANSYS 13 Design Tools :Math CAD, Design Viewer, Unigraphics NX, Pro-E 5.0, Solid Edge ST, ANSYS 13 :Static structural, Fatigue life, Transient structural, explicit dynamic. Math CAD :Design calculation Design Viewer :Force Evaluation of mechanism Solid Edge ST :Part Design, Sketcher, Assembly Design, Drafting PRO/E-5.0 :Part Design, Sketcher, Assembly, Drafting Unigraphics NX :Part Design, Sketcher, Assembly
I have 10 years of engineering and purchasing experience. I have a diploma in Industrial engineering technology. My strengths lie in engineering drawings and anything related to ERP operation including downloading/organizing/transfering large amounts of data (possibly related to a new system install, or changes to data for reasons of time study and time standard/cost changes). I possess advanced skills in Microsoft Excel and Access. I am loyal and dedicated and truly enjoy working. I would be available for work related to engineering functions, data entry, office administration, engineering drawings, plant layout, equipment problem solving, equipment procural and much more.
Experience in Electrical Design & quality control of Electrical Engineering production drawings for semiconductor fabrication facilities, petrochemical facilities, solar power plants, substations, commercial, industrial and institutional buildings, aerospace, space and the U.S. department of defense. For projects such as such as IC manufacturing facilities, refineries, chemical plants, schools, hospitals, shopping centers, public utilities, data centers, wireless & land line telecommunications systems, clean-rooms, photo mask sets, spacecraft and aircraft. Using single line diagrams, schematic diagrams, lighting plans, power plans, communications plans, audio/video broadcast, conduit & cable tray plans, fire protection, logic diagrams, wiring diagrams, PLC layouts, area classification, schedules, wire lists, details and bill of materials. Familiar with NEC and NEMA classifications. Experience in construction project management.
I have a Bachelor of Electrical & Electronic Engineering from Ahsanullah University of Science & Technology, Bangladesh and am a Member of The Institution of Engineers, Bangladesh (MIEB/30392), E-member of IEEE (92351404) & ASHRAE (8206777). I have been leading Engineer form 2009 for several projects, which I Designed , Checked, and Modified, Rebuild by CAD tools & execute them. I have well-built background in planning and supervising projects at the same time within given deadlines, skill in administering personnel, identifying trends, preparing & maintaining budgets,Preparing, Checking & Modifying Tender Documents . I also have an established track record of leading integration of systems including software, hardware, mechanical and electrical fields & also have excellent encounter in graphics designing, web page designing, developing & maintenance, logo designing and banner designing. I have excellent command over, Adobe Photoshop, Adobe Illustrator, and other related applications.
Experienced Mechanical Design Engineer with Master's degree and a diverse skills set. Innovation is my strength. Skills include: 1. 3D Modeling (Pro/E, Solid Works, Unigraphics) 2. Stress Analysis (ANSYS, Pro/Mechaica and hand calcs) 3. Concept Design 4. Detailed Design 5. Create FMEA and DVPR 6. Failure Analysis 7. Cost and Warranty Reduction 8. Technical Writing 9. Product Pricing 10. GD&T and create drawings 11. Design for Manufacture and Assembly 12. Packaging 13. New product builds on assembly line 14. Managing Production Emergencies 15. MS Office (Word, Excel, Power Point) 16. Piping design, critical nozzle/orfice design, valve sizing 17. ASME B31.1, B36.10 piping codes Product Design Experience/Knowledge: 1. Advanced Diesel Engines (6.7L, 9L, 10L, 11L, 13L, 15L) 2. Aftertreatment Systems (2010 and 2012 EPA regulations) 3. Medical Devices (Stents, prosthetic implants) 4. Power Plant facilities 5. Steam Turbines (25MW - 1500MW)
* Design Engineering and CAD Drafting Services * I focus on delivering professional design and CAD engineering services. I am a very detail oriented person who with over 10 years of engineering experience.
Innoventure was primarily founded to help organisations meet their design needs. It intends to provide industrial design and engineering solutions to cater to the form, function and development issues of a product. We have an experience of about 4 years and an involvement in the design and development of 15 successful products, which range from home appliances and security devices to medical products and software user interface design. We have thorough knowledge in materials and manufacturing processes for both metal and plastic products. We are actively involved in all the phases of New Product Development, from research to the final tooling phase.
I can offer you my 10 years' experience in Strength Analysis, 10 years experience in developing Civil construction plans for commercial and residential projects. Devoted to creating plans that are precise, clear, and provide value with a common sense approach. Background in construction and now full time in developing workable construction plans.
KCS is a multi-service Architectural consulting and Electrical Project design Consultant organization. KCS is committed to provide cost effective and high quality service in time. We understand the quality and delivery requirements of our domestic and international customers. Our strength lies in our vast domestic/international experience and understanding of domain specific requirements. We believe that a satisfied customer ensures a long-term association through repeat orders. This belief has helped us to retain our clients and to earn their trust. We have been growing at a steady pace and believe in continuously upgrading our skills instead of being in a tearing hurry to be the biggest player in this business. Our technically competent Architects and Electrical engineers, our stress on adhering to Quality & Scheduling requirements, our infrastructure and our ability to work on a wide range of client needs, are what help us in our endeavor.
I am a BSc Engineering (Hons) undergraduate at University of Moratuwa, Sri Lanka. I am new to Elance.com and i will undertake any SolidWork designs, Mechanical Engineering works and photoshop works. Hope to expand my scope of work later. SolidWorks I will undertake all types of design works with or without related to Engineering applications. Mechanical Engineering I will undertake all types of Mechanical Engineering works such as consultation, article writing and manufacturing. Photoshop CS5 I will undertake all types of Photoshop works such as remaking the photographs and any type of designing. My objective is to provide a 100% accurate final product. I will be100% flexible for all project changes requested by my clients and do not charge any additional fees for such changes.
During my training in consultant firm all my work was analysis and design of structural elements. it become as routine and I didn't born for that. After I graduated from school I become a part of a consultant firm that was involved in big project which was a up to my level of challenge. It was the kind job i was looking for. After 1 years I decided to explore in field of industry a friend of mine told about the freelancing and it sound great where you don't have to worry about your boss because you are the boss of yourself !.
New to Elance, but a lifetime of experience to contribute from a range skills: * 15 years of automation and control systems development and the technical writing that comes from that activity. * 10 years of risk management, business continuity planning, post disaster management, formal report writing of loss incidents, forensic engineering * 7 years as VP - Engineering (US organization based in NZ) focused on 3D display and BLU design (utilizing LCD technology) A range of operations and engineering management roles with a raft of related skills and document creation skills. I am also able to assist with organizations wishing to introduce new technologies between Asia / Pacific countries.
Solutions Architect , Technical Support Engineer, Estimation Engineer, Tendering Engineer & Projects Engineer (HVAC controls, BMS, IBMS, Systems & Solutions, Carbon footprint reduction, remote monitoring & control of energy, ICT enabled real-time managed services) Trained in Engineering, Installation, Testing & Commissioning: Honeywell Excel Classic & Excel Plus DDC controllers, Microcell & Macrocell unitary controllers for VAVs and CAVs, DNGC BMS central; Carrier CCN Comfort DDC Controller, Comfort Works BMS central, unitary controllers for VAVs CCS, VVT for multi zones controls installation; Barber Colman LCM & GCM DDC controllers, Network 8000 BMS central Experience 20+ Years: Pacific Controls (1Y 4M till March 2013), Honeywell Building Solutions - BMS (15+ Years), Carrier Air condition CCN Controls (1 Year), Barber Colman - Invensys (4 Years), PPL Foster Wheeler - UK (3 Years), Kentron Pakistan - USA (1.5 Years)
Mechanincal engineering student with experience in production drawings and product design.
Professional designer of injection molded plastic parts and molds. Total project management from prototype to production. Over 20 years experience in the industry. Experience in all industries, specializing in medical devices.
I am a Mechanical Engineer having 6 plus years of work experience of Design and manufacturing in Tool Design, Aerospace, Automobile, Machine tools and special purpose machines, General Engineering Domains and Technical Documentation. Having hands on experience in Product Design, 3D modeling, Detailing, etc. using CAD softwares such as CATIA V5, SolidWorks, Pro-E and AutoCAD, etc. Also having hands on experience of tool path generation using CAM Softwares such as DelCAM, CADEM, etc.
I am an engineer with more than 7 years of experience. I work on projects of multiple disciplines in engineering including: mechanical, electrical, and industrial. I am well rounded and detail oriented. I offer great service and better prices.
Experienced Mechanical Design Engineer with 8 years experience in product development and design. Involved with all the phases of product development from conception to product release. Responsible for product and systems design including components and assemblies, detail drawings, assembly drawings and engineering BOMs. Specialties include part or systems design using 3d cad software. You think it, I will help you create it.
My name is Robert and I am a mechanical engineer with approximately twenty-five years of mechanical engineering experience, focused mainly in product design and development. I have been responsible for the "cradle to grave" development of a variety of products that serve numerous industries ranging from consumer goods, sporting goods, gaming, coin-operated products, heavy equipment, transportation, automotive, aerospace, furniture, residential and commercial lighting, and construction. I am very well versed in the entire design/development process beginning with conceptualization, prototyping (rapid and traditional), design refinement, pre-production and production level design as well as production factory implementation and start-ups. My "out-of-the-box" and creative thinking have garnered numerous patents that have greatly benefited many clients and demonstrate a track record of successful product design and development. Projects large or small...I do them all!
Hi, We are expert in Electronic Circuits Design and Simulation. Microcontroller programming. Analog and Digital Circuits Design and Development. Vast experience in electronics field. Our team consist of highly motivated and professional Electronic and Electrical Engineers working on different projects in local industries of Karachi. OUR MOTIVE IS CUSTOMER SATISFACTION We provide solutions of Electronics and Electrical product design and development including hardware and software, source codes programming on C language. Have proven track record of successful projects on E-Lance.com. Our profile speaks about our abilities. OUR MAJOR FIELDS Electronic circuits design and development Analog and Digital Electronics PIC ATMEL AVR Micro-controllers Circuit Simulation using Proteus and MULTISIM MATLAB, Simulink PCB Schematics design using Orcad Solutions of different types of numerical and theoretical based questions Instrumentation Programming in C & assembly
I am a licensed Architect, in the United States, with over 9 years of experience.
Architecture student with a masters degree in electrical engineering with experience in a lot of CAD and design programs. 1. High quality services; 2. No language barrier; 3. Fast communication response time. We teamed up with licensed experts in: architecture, interior design, landscape design, product & industrial design, graphic design & illustrations and fashion design.
51 Projects on Elance = 5.0 RATING Background in Mfg, Production Planning, R&D and Quality Control. Packaging background. Printing, Laminating, Extrusion, Foil, Paper and Films. PROTOTYPES MADE--LABORATORY FOR DEVELOPMENT WORK Degreed in Education, Science and Business. Blogs on drinking, smoking, health and Wellness Playwrite, poet hobbyist. Teacher Certification in Chemistry, Physical Science and Special Ed Ghostwriter of Academic Papers and Etc. Tutorial writing, Methods Manuals, Spec Writing, Technical writing, Academic Writing. Science Writing. Fiction and Non-fiction writing. Ghostwritng of Books, Plays, Screenplays, Outlines, Poetry, Lyrics,
I have worked as a Manufacturing Engineer or Programmer for years. Every job I have had, I have advanced to become Senior Programmer or Manufacturing Engineering Manager. I am a designer, programmer and Manufacturing Engineer. I have worked as an outsource programmer etc for several years. I am very effective in programming, solid modeling, 3,4,5 axis machines and designing parts for machinability. I include images of setup, tool lists or I will use ones provided. I also include reprogramming or re-designing to tweak or adjust to fit manufacturers needs without extra costs. I providing a timeline and I stick to it. I am also available 24 hours a day. You can see videos I have made giving tips on 5 axis machining with you tube. username mistershotgun1975. Or you can see some of my work in your local business. I was part of the design team for Coinstar change machines, Coke, and Harley Davidson. Thank you Gary Day
US Citizen living in Germany. --- Total Earnings $22,059 - Reviews 5.0 stars average - Elance Hours 539 - Elance verified identity - MCSE- HPUXCA - VDE - Python - Linux - Windows - OSX --- Work guaranteed in writing --- I'm a US native living in Germany and a 20 year veteran with engineering, project management, technical and scientific writing, and scripting. I'm currently specializing in scientific, biotechnology and molecular biology projects. The advantage I can bring to you is quality - Guaranteed - in WRITING. I believe in the old adage, "You can have it fast, you can have it cheap and you can have it right...Pick TWO." There's a lot of fly-by-night contractors on Elance. I can GUARANTEE you work done correctly and quickly the first time, at a reasonable price. I back up all my work in writing and if you're not satisfied - I'll fix it. I look forward to the chance to work with you! Mike Rightmire
I run Cabinet Vision creating drawings, engineering cabinetry, producing cut lists, and providing assembly sheets for individual cabinets. I can teach you to set up Cabinet Vision and train you to use it.
I am well experienced in rebar estimating & detailing. Also experienced in concrete take-off of various projects
Im a product designer who have the ability to turn your idea into real life. Make it manufactuable, cost effective for high volumes and aesthetically pleasing for a bonus in marketing. Experience in packaging for electronics and plastic injection moulding products.
With background in engineering and construction. Provide technical & business support services to help you prepare construction documents, feasibility studies, business plans and research reports.
My responsability as project engineer is developing all type of calculations using ANSYS and STAAD PRO software mainly. Static and dynamic calculations, and also linear and non linear calculus.. Customizing ANSYS using APDL and TCL programming. Calculation of all types of great scale steel structures (tubular, lattice, singular,..), over 100 m hight in some cases, with great influence of turbulence and inelastic phenomena. Research and Development Center in Automotive (CIDAUT ), located in the Technology Park in Boecillo, taking part in several projects, many of them aimed at the simulation of dynamic high-strain phenomena using finite element codes within the simulation of impact department. Software used was PAM-CRASH/SAFE (CAE), I-DEAS (CAD/CAE), ANSYS (CAE), MADYMO (CAE
I am exploring new opportunities in Civil Engineering/Site Observation where I can continue to provide in-depth knowledge in the planning, design, and construction of civil engineering projects. As a well-qualified engineer with over 5 years experience in Construction Inspection and 3 years in management and planning of hydraulics structures. I recently passed the license test and registered as a Professional Engineer in the State of Kansas. I work now as a Construction Inspector for a consultant firm in Kansas City, MO. My strengths lie in my ability to manage the entire process --- from site review and analysis through planning, engineering, field management, and regulatory approval. Most significant has been my ability to resolve issues and achieve compliance with regulatory agencies. Sincerely, Saad Mohammed
We are CAD/CAM/CAE consultants providing design & analysis solutions for manufacturing industries. We deal with comprehensive mechanical engineering software like Creo (previously known as Pro/E), MathCAD, WindChill, MSC Nastran, Protran, Adams, CorelCAD and so on. Our business model to interlink 3 target segments in CAD/CAM/CAE has been great success as we delivered best service to our customers. For more details, please visit our website, www.ynotengineers.com or call me on +--88 Here are snapshot of our achievements in recent time: 1. Awarded Best Service Providers South India in 2012 by PTC. 2. One stop shop for all your MCAD solutions like Training, Design Consultancy, Licensing & Hiring Resources 3. Having branches at Coimbatore and Bangalore I would like to initiate exploring the opportunity with you. Please respond to this proposal and we can discuss further over the phone.
Skills Knowledge of MS Office, AutoCAD Able and eager to learn new applications/skills quickly Social skills and competences No difficulty working in a new environment, easily enters into communication with colleagues. Able to work efficiently both independently and as a member of a team. Organisational skills and competences Organisational skills (I was responsible for monthly account of the construction works and I coordinated the works on bridges) Technical skills and competences Good command of technical drawing (concrete and steel structures, building) Knowledge of building works - I worked as a site engineer, site manager and I was responsible for earth works, shuttering works, steel fixing works, concrete works, steel works: assembly, welding Computer skills and competences Knowledge of Microsoft Office, AutoCAD Basic knowledge of graphic design application (Gimp 2.2) Driving licence driving license - category B
Hi,I am Rakibul, B.S.C engineering student of Industrial & Production Engineering in Shahjalal University of Science & Technology. Basically I have interested in designing different types of mechanical parts or products. I have some sort of knowledge & experience on 2d & 3d designing in Autocad. I have also knowledge on microsoft word,excel &power point presentation. As an engineering student also knowledge on statistical tools like SPSS, R software.
About Imagart Imagart is an engineering company founded from experienced professionals guided by their passion for creation and the pursue for innovation. There are three Departments that compose the company, the Creativity Dept, the Engineering Dept and the Design Dept. The services provided include product design with all the engineering considerations, presentation in the form of 3D Visualization and/or animation and 3D printed prototypes. Specialties Mechanical Design, Industrial Design, 3D Animation, 3D Printing, Injection Molding, Model Visualization, Jewelry Design
preliminary designs of vessels as per owners requirements, engine room layout designs, shell expansion plan drawings, determining scantlings of the vessel, hydrostatic calculations,
Progressive experience in many facets of manufacturing including automotive and commodity. Experienced in engineering, program management, and quality improvement. Proven performance in price reduction and cost avoidance. Progressive exposure and experience in engineering, tooling analysis, work cells layout, work instructions, manufacturing training procedures, and equipment layout & installation management.
A qualified multi-disciplinary Engineer (Civil Engineer & Mechanical Engineer) with 20 years of experience in Detailed and conceptual Designing, Site Erection, Commissioning, Supervision, Coordination, Layout and Budget Proposals, including 18 years in the Hydrocarbon Industry. Adept at handling Vendor Management, Foundation Drawings, and Man Power Mobilization. Known for In-depth technical knowledge and expertise on the relevant software and excellent Resource Management and Timely Completion of projects. M.Tech from IIT Bombay and worked with Hindustan Petroleum, Reliance, British Gas in major oil and gas projects.Expertise in Plants and Pipe lines projects, in respect of Civil, Mechanical designs, site execution, vendor development, CPM , PERT, project scheduling, time lines fixing, Installation and commissioning of all plant equipment , pipe lines including designing .
Seeking challenging assignments in a dynamic organization as a Professional in the Engineering field that will strategically utilize my existing skill sets while providing opportunities to amalgamate personal enrichment with professional goals.
I currently hold a Bachelor Degree in Electrical Engineering and perusing my last year of Master's Degree in Industrial Manufacturing Automation & Quality Management at the Polytechnic University of Puerto Rico. -Experience on managing over $150 million of investment on multiple projects simultaneously and successfully achieved milestones, ensured projects compliance with cost and specifications. -Have participated in the development and implementation of new software solutions. -Currently work as Project Planner Analyst at the Main Logistic Center (Guaynabo) for JnJ.
After earning my first personal computer in 2001, I have immediately started independently learning 3D modeling, technical writing, and digital painting. Four years later I graduated from high school and went to a community college to study Engineering. During that time I started working on a personal robotics project requiring several skills including advanced mathematics, programming, computer-aided drafting, technical writing, and graphic design. This led me to continue my studies at The State University of New Jersey (a.k.a. Rutgers), where I have taken several mechanical engineering courses before finally deciding to persuade the Electrical and Computer Engineering curriculum. During my final semester at Rutgers I have decided to sell my skills to those who need them, and registered at Elance.com to help me achieve my goal. And so, I plan to use this website to help individuals or business owners achieve their goals with minimum effort and maximum confidence in success.
- Education and skills Education: Faculty of Archtecture, Belgrade University Profile: Graduate architecture engineer / MSc.Eng.Arch Computer skills: AutoCAD, Photoshop, VectorWORKS, 3ds MAX, Vray - Languages: English Portuguese German - Major proffesional domains: Design, management in architecture, project cost assessments, financial supervision of project developments, providing technical documentation for buildings of all types and purposes, providing urban designs and plans, interior design, work on buildingsite, supervision. - Member of Serbian Chamber of Engineers Licence for Designer in Charge Licence for Contractor in Charge Buildings Energy Efficiency Engineer in Charge - Ministry of Justice Court expert in field of architecture since June 2011.
I am a Civil Engineer with experience in hydraulics, roads, costs, budgets and engineering. I have working experience in hydraulic modeling for hydropower project. Specifically, I have been intensely involved in: pre-design for hydraulic structures, hydrological analysis to calculate environmental flows, AutoCAD Civil 3D modeling for river diversions and water management; water and sewer networks design, indoors hydraulic network design, coordination of blueprints execution, blueprint development, and calculation of workloads.
I am qualified Mechanical Engineer with adequate University Degree, specialized in Mechatronics. Experience designer for steel constructions and all kind of AutoCAD related drawings. Also have good skills in designing 3D Models in SolidWorks and Tekla Structures
I am a license civil engineer working in a structural design company. I have been involve in many structural and construction project abroad as our company serve clients from Middle east, UK, and Australia. I have been exposed to projects using different design codes like ACI, BS, Eurocode, Australian Code, etc. I am as well working as an online academic tutor teaching Engineering subjects, Mathematics and Physics. I help students in their online academic courses and help them in their assignments and projects.
I have experience in Civil and Structural engineering with advanced knowledge in structural engineering softwares. Also working as Chief Project Engineer (CPE). Development of the design task and issues for MEP, schedules of design works performance of the all stages. Development of the chart of approval of the basic building structures. Monitoring of the design process according to the schedule, quality control of project documentation, its revision and issue of the comments. Approval of changes in the project and control of their entering into the project documentation.
Engineer, Scientist, and Programmer with 12 years experience in optical and electrical component research, development, manufacturing and test automation.
Engineering undergraduate specialized in Production Engineering with a great knowledge in manufacturing ,CAD (specially in Solid Works) and also report generation.
Well,I get ready to serve right now! I know this is a first time but you do not worry. I am working in automotive filed and also can translate Japanese language. In the design section (CAD,CAM,product design, prototype design) base on CATIA but I can do if you need me to make by other programs.
i am a qualified professional mechanical engineer and working as a service engineer in Honda motors pakistan.
I work for Conseptas which is specialized in mechanical design. The core competence is in shock proof and water resistant devices (IP- and IK -protected) but classical mechanical design is familiar as well. Cooperation with our partner network offers a broad knowhow in industrial design, electronics, FEM calculation and ramp up support. More information: www.conseptas.com www.mekaniikkasuunnittelu.com Specialties - Product design: plastic, steel, sheet metal and fine mechanics products - IP- and IK- protected devices - Mechanical sourcing - Manufacturing ramp ups - Project management - 3D tools: SolidWorks, Pro-E and Siemens NX
Licensed Architect (assigned by Serbian Chamber of Engineers, 2007), graduate of Moscow Institute of Architecture (State Academy) 2003, with over 10 years of experience in design and planning of residential/business, public and industrial buildings projects (from skatches to construction project, over 200.000m2 ), as well as in interior design. I work in AutoCAD applications, Google Sketch-Up Pro, Artlantis Studio, Photoshop. I speak English, Russian and Serbian language. You may check my portfolio at: http://www.wix.com/marijamhl9/marijamihailovic-portfolio
We have a company located in Shenzhen, experting in mold designing and engeering designing. We have mold department, injection department, cloth workshop and assembly department. We can design and produce all kinds of promotional gift whatever you want.
I'm a level 3 aviation engineering student, towards an MEng-Degree. I am well acquainted with Siemens NX-7.5 of which i basically worked on designing a torque link for a nose wheel, Solid Works 2012, ANSYS-fluent & CFX. I am also well acquainted with Matlab, Microsoft office including, word, excel, power point, office libre. Am currently doing some flying towards a PPL. Am a very confident learner as i know that knowledge is vast and whatever we have as individuals is a fraction of what there is to knowledge. I'm very efficient and able to work with groups or in a team to accomplish a specific task. I like being innovative, creative and different in a good way. I'm also a very good tutor, whether formally or informally. I'm structured, well organized and flexible depending on the circumstances.
-To carry out the highest quality and standards of Engineering Applications with specialization in Architecture and Civil Engineering works including creation of Conceptual Designs, Structural Plans, Architectural Plans, Rendering, Photo Editing, Cost Estimation, and other field of work. -I aim for the best client-contractor relationship by delivering excellent results coupled with professionalism. I am offering the vast experience gained in construction,Architectural and Structural analysis,2d drafting, quantity surveying,3d Modeling, cost estimation, bid proposals, material canvass & procurements, project supervision and office management. I have excellent skills in Auto Cad,Staad Pro,Etabs 9.0, PCA softwares,3D MAx 2008 with V-Ray,HDR render,Photoshop,MsWord, and Ms Excel..
I have a background in manufacturing process, supplier quality control, procurement engineering and in ISO 9001.
I'm professional Mechanical Engineer, 15 years on design, development and management of project; Expert on injection molding plastic parts and assemblies. Familiar with all machining applications (milling , turning). Advanced level on technological and measurement devises. Master of ergonomic design. Vendors coordination and management of subcontractors. Project from start to finish and optimization (redesign) of existing products. Owner of design studio www.shapedesign.biz
I am an ambitious and energetic person with interest in all things technological and scientific. Experiencing ideas coming to reality has solidified my decision to become a mechanical engineer. I enjoy very much taking on new, challenging and complicated problems and acquiring new knowledge to solve them.