Extensive experience in the R&D technology industry involving: product development, EMC/RF/high-speed digital design, mathematical modelling and predictive modelling (Matlab, Visual Basic in Excel, COMSOL, elementary C++), pure research in electromagnetics and mathematical physics, with expertise in partial differential equations, topology, differential geometry, quantum gravity, gauge theory, quantum measurement theory, quantum computing, quantum mechanics and electromagnetic theory. See www.linkedin.in/com/in/chuentoh. - seeks opportunities in: technology development and innovation in Science, Defence and Technology industry, pure mathematical sciences research (quantum gravity, gauge theory, quantum field theory, quantum measurement theory), mathematical/predictive modelling/simulation, quantum theory applications (e.g., quantum computing, quantum information theory, quantum devices) and electromagnetics (wave propagation, dielectrics, digital design
I have a PhD from NC State in physics and have done theoretical work in hydrodynamics, acoustics and many body systems. My experimental work was in acoustics and granular materials. Since graduating, I have been pursuing entrepreneurial and startup opportunities in alternative energy and medical devices. I look at things from the bottom up and distill problems down the the most understandable and practical resolution then I package it in a language that is clear and tailored to your needs. If I can't do something I won't waste your time. If I can, you will be impressed.
I'm a Physics Associate Professor at Paris University.
Postdoctoral fellow at the University of Tokyo in the department of Applied Physics, specializing in experimental condensed matter. Focusing on low temperature measurements of graphene-based devices. More specifically, building and measuring devices for the use in quantum computing as well as photon detection. Experience in conducting transport measurements at millikelvin temperatures, modifying and operating the cryogenic equipment. Have many computer language (Matlab, LabView, C), hardware (machining), electrical (PSpice, Orcad, low level measurement), mechanical (Solid Works), sample prep skills as well as experience in low level measurements of quantum dot and superconductive devices.
Over 6 yearsÂ experience in Marketing Research as Data Processing/Analyst, with following competencies: -Cross Tab analysis from raw data with the help of Quantum, Quanvert, Pivot Tables and SPSS. -Expert in MS Excel with blend of VBA. -Preparing presentations and providing dashboards for quick analysis. -Have ability to extract important information from a data that influence the success of businesses.
I am a B.Sc in Physics and Biology from the Technion Israel Institute of Technology in Israel. During my bachelor studies I specialized in Astrophysics, Quantum Information Theory, Quantum Mechanics and General Relativity. Besides tutoring and as part of my studies abroad in Germany, I was a tutor at the Albert-Ludwigs-Universitaet in Freiburg. There I taught two groups of students (40 students per group) basic mechanics, electromagnetism and thermodynamics. I also know some languages. My English and German are on a very high level. My Hebrew, C and Matlab skills are more than basic.
I personally have always been fascinated by anything that involves science from methanogenesis in small micro-organisms to the vast and mind boggling quantum world and hence have always loved sciences and math which led me into the field energy engineering cause engineering is an art which involves applying what i love to make the world a better place.With total love and obsession to the field, I know that all i do is to what anyone interested will totally like and admire and hence a good relationship is sure to develop between us.with total loads of hours put in during crunch times with the immense challenges i face from using my science knowledge to design and a picture a better planet without any concerns about green house emissions and enough energy to supply us for years without any doubts of an energy deficit, i like to not only picture the world in my mind but take part in its development and live my dream.Energy engineering is my life and i want to live it to the fullest.
Results-driven doctoral level technology leader with a keen eye towards new analytical innovations, and difficult problem solving. Demonstrated ability to formulate original analysis methodologies and invent ground-breaking new technologies for the broadband cable and telecommunications industries. Extensive experience developing mathematical models for these industry sectors of pertinent complex physical systems that accurately predict new behaviors. Computer aided simulation results confirmed both in the laboratory and in real-world scenarios. Instinctual ?take-charge? attitude with key strengths in complex technical analysis, peer mentoring/communication, and multi-tasking. Strong background in Mathematical Modeling, Statistics, Analysis of Large Data Sets, Physical System Modeling, Fiber Optic Network Engineering, Electrical Engineering, Applied Physics, RF/Microwave/Millimeter-Wave/Wireless Engineering, Technical Due-Diligence, and Intellectual Property Matters. Ten patents.
I'm a graduate of Surveying and Geoinformatics, seeking to build career in a surveying and geoinformatics field, engineering, Oil/Gas and telecommunication field, Strong-willed and aptly able to adapt to any works Environment. A highly, dependable and innovative graduate with a friendly approach to problem solving and customer support. A self motivated team member, with technical knowledge in Spatial Analysis along with excellent leadership and communication skill. IÂm good at absorbing information, analyzing problems, making objective decisions and coming up with original ideas. Able to make effective application of techniques in decision-making, by combining a strong engineering background with keen insight.
Why you should choose me: I will consider any GIS project within my current competence and capability, which may include pro bono work in exchange for credentials.
My goal is to full-fill all the clients need. Rather than price value. --.
Professional whit more of 14 years of experience, expert in GIS, geospatial, DIP ERDAS, arcGIS. I have been working in private enterprise (consultant petroleum companies) and government (Ministry of Science Technology and Innovation)
I am Civil Engineer having specialization in Hydraulics and Irrigation. I have experienced in hydrological modeling (rain, snow & glacial melt processes), Climate change impact assessment studies of various watersheds, Pre- and post processing of Satellite data, Preparation of GIS-based maps, Preparation of technical and financial proposals and Expression of interests (EOI).
I am a Surveying Engineer with a Masters degree in Territorial Planning. Almost 20 years working with AutoCad and various GIS software packages, including Arcgis, ArcView, QGIS, Global Mapper. I am an extremely diligent worker with a perfectionist attitude. I am not worried whether assignments are complex or straightforward.
I am Engineer Samuel Nkata, a telecommunications professional, vast in managed service network operations, i have a bachelor of technology degree in Industrial physics(majoring electronics), i have a working experience of almost five years in the telecommunications industry, i have worked on many projects and solutions for big mobile operators,a formidable team player and adherent target achiever, i believe i will be of immense support to the personal business commitment of your organization
I am GIS and Cartography postgraduate. My core competencies are connected with: digitizing, data analysis and data conversion, ArcGIS geoprocessing and spatial tools, Google Earth and Map Design.
I am a civil engineering aspirant who is currently pursuing his 7th sem from Biju Pattanaik University of Technology,odisha willing to work as an intern in a construction firm to enhance practical skills, while i have a comprehensive background,my emphasis is on rehabilitation and renovation. i feel that it will privilege to work as an intern in a firm which places prominence in similar areas and will give me that further exposure which i need to advance my career. Currently am serving as an intern in govt of Odisha work dept.and observing road and building works(both sub structure and super structure) i previously participated in a 1 month summer internship program in" Premier piles LTD."where i learnt about DMC pile and observe its various functions.apart from that i participated in a summer training program organized by civil simplified company at SMTC kolkata and enhance my software skills.even there i was achieved The best innovation award in bridge designing competition.
I am a Quantity Surveyor who has Higher National Diploma in Quantity Surveyor and National Certificate (NVQ5) in Civil Engineering. I am able to perform any Quantity Surveying related works and Drafting works I have more than 12 years experience in construction industry of Sri Lanka, Maldives and Middle east and I am a Incorporate member of Charted Institute of Buildings (UK) Currently I am working as freelance quantity surveyor for Sri Lanka's reputed Architects and for Quantity surveying firm who is doing measurement services for Large scale Middle East Projects. I am Expert in following areas Takeoff Quantities according to standards NRM, SMM7, CESSM4, POMI Preparation of BOQ for any scale of projects. Structural & Architectural Drawing using Auto Cad Material Reconciliation Cost Planning Estimating
I am a student of Spatial Development also completed postgraduate studies in Geoinformation. Designing maps for GIS and drawing in AutoCad is my passion. Currently I make visualizing production lines for the food industry.
I Sathis Babu.M hailis from Salem,India. A Remote Sensing & GIS Professional,having been in this business for 3 yrs now,works on the application of RS & GIS tools in varied sectors Geology, Forestry,Water Resources,Natural Hazard & Disaster Risk Management Studies & Utility. Contributed more towards Geological Remote Sensing. **Getting better everyday professionally relies completely on keeping you updated in the advances in the sciences which I strongly believe and starves towards it. **Love to work in a strong team that thrives for respect and shares a common goal. ----------------------------------------------------------------------------------------------------------------------------------------------- # Guided College students on different projects on the technical application of Remote Sensing & GIS softwares for their Master thesis, students from IIT,Mumbai & TERI,New Delhi. Served as GIS Faculty for a very short tenure which helped me to unearth the love towards subject
I am very good Physicist. I can fulfill what you are expects.
I am very responsible, accurate and timely with my commitments.
Graduate student in Physics (110/110 cum laude at the University of Trieste, Italy), some experience in numerical simulations and stochastic processes , working knowledge of Excel and C programmation, can speak and translate four languages (Italian,Spanish,English, German) .
I am a Marine Biologist with a master Degree on Geographic Information Systems by University do Algarve (Portugal). I specialize in Micropalaentology (benthic foraminifera), palaeoceanography , Coastal Dynamics and GIS.
Geographer with more than ten year experience. Expert in Remote sensing images processing, geodatabases and complexes Geographic Information System Projects (GIS). Scripts Development in Python, C#, DotNet.
Simple offering his all potential &agressive
Civil and Structural Engineering, Junior student Emphasis on: Structural Engineering and Geotechnical Engineering
I am well equipped with good background of mechanical design using CAD, electrical and electronic design amidst mathematical skills. To accompany these are my innate push to always produce the best possible.
Je vous propose des services en gÃ©omatique (shapefiles, orthophotos, etc.) et des formation ponctuelles pour votre Ã©quipe.
I'm currently an Electrical engineering PhD student at UBC (Canada).
I have 20 years experience in autocad (building-architecture) 6 years are in Institute for Nature protection in collecting data from varius format an digitizing it for graphic prepress and 3d. Programs used for achieving this are: autodesk architecture, autodesk map, autodesk raster design, arcview, arcgis, r2v, so I can say that i'm managing many type of vector and raster formats. First of all my biggest experience is in autocad package (autodesk architecture, map and raster design). I'm also very familiar with excel and program for nature visualisation (visual nature studio) suitable for landscape 3D.
My background is in Physics and Engineering - Applied Science. I have over ten years experience in research, design, and execution of complex assignments for military, universities, and private contractors.
Over 7+ years Experience in handling CAD/GIS/Survey Projects Skill Set a. Good hands on experience in Executing GIS projects independently -Land Base mapping, Utility mapping-Telecom, water & Electricity, GPS/DGPS Survey mapping, Geology/mining/Flood mapping. b. Good experience in Arc GIS 9.3 &10.2.1, Arc fm, AutoCAD map 3D 2008, Erdas Imagine, Global Mapper 10, MapInfo 9 c. Good Experience in Goggle Earth, Goggle maps (Data acquiring Geo referenced Image/map data Collection). d. Good Experience on Geo database, Data model, and spatial reference e. Good Experience in Map projections, Raster Geo referencing / Rectification, Geo coding. f. Good knowledge in understanding the design and architecture of GIS Applications. g. Good Communication skills and good problem solving skills Good Knowledge in Spatial/ Attribute data Queries/Analysis
I am going to graduate with a bachelor of engineering degree from Sichuan University,China in 07/2015 majoring in nuclear engineering. I am the leader and microcomputer programmer of a national undergraduate innovative project using Bluetooth Low Energy to track small yet valuable things trying to make a product like Stick&Find. I also took part in a scientific research project initiated by my professor to conduct numerical simulation & modeling of single particles movements in uniform & gradient included magnetic fields based on Fortran language programming & Origin 9 graphics software. These prove that I have professional C& Fortran programming skillls, great sense of responsibility, an excellent master of computer as a powerful tool as well as project leadership abilities. Besides, I have great language skills. As a Chinese, my TOEFL(Test of English as a Foreign Language authorized by ETS) test score is 100/120.
I can do it! I have experience in this job!
PhD in Physics, minor in Mathematics and Chemistry Advanced level Expertise: Physics, and scientific computing with high level of complexity. Other expertise: Any branch of mathematics up to undergraduate level.
I am student of B.Tech degree in Mechanical Engineering. currently in first year of the course.
Passionate. Pedagogic. Customer-focused. Creative. themagiscian.com I am Daniel Demonceau and I help people getting the most out of spatial data. Passionate about GIS and Geography, I am holding a position as a consultant at esri, the leading GIS software company. I have also experience with Intergraph software (working there for 3 years) and OpenSource software. I believe that Geography and IT combined go beyond the spatial purpose and can solve even non-spatial issues. I hence created the didactic blog themagiscian.com, who enlightens how common spatial problems can be solved with the various GIS tools that exist on the market.
I have earned a PhD degree in Laser Physics modelling, designing, developing, constructing and testing the range of lasers. Owning and operating a successful travel agency for 4 years developed deadline-driven management skills. I became proficient in organizing, planning and negotiating. As I interact well with people, in 2009 I was awarded the D'Arcy Thompson Prize for excellence in Public Engagement. For the last two years, I have been working at the University College London with a photoacoustic ultrasound system for ex-vivo and in-vivo imaging of the tissues and organs. Part of this project involved designing and making specialist holders and connectors and chose to do this using 3D CAD software and 3D printing. I was fascinated by 3D printing technology and its possibilities, for example I used 3D printing to develop Agar-based ultrasound phantoms for vascular access training and flow studies. At the moment I am investigating properties of acoustic cover lenses made by 3D printi
A specialist in computer modeling of physical problems of different kinds. Optics, Hydrodynamics, Electromagnetic, Microwave. 3D modeling. OpenFoam advanced user and developer. Great ability to learn new information quickly and efficiently. Aimed to succes in the implementation of any project
IÂve a degree in geology, technical application (engineering geology/geotechnical), I'm currently employed as a technologist in a primary concrete company. I work also as a freelance geologist-geotechnicist. During these years i got talent in concrete engineering and quality management, i've operated as a concrete surveyor and troubleshooter in many different surface and underground building sites. Currently I work in the technical laboratory of the North Italy commercial area, placed in Milan. I coordinate: the preparation and generation of concrete mix design for standard and special, tests on fresh and hardened concrete, analysis on the aggregates, technological assistance on building sites, monitoring efficiency of concrete plants, quality control (FPC: Factory Production Control). Also I give support to the head quality manager (HQM) as corporate internal auditor for ISO9001 quality control, corporate internal auditor for the factory production control FPC.
I specialize in the design and development of medical devices and optical systems for compliance with regulatory and electrical safety standards. I assist medical device companies in understanding and navigating the electrical safety and risk management landscape including, but not limited to: 60601 (2nd to 3rd edition transition), 61010 (1st edition withdrawl & 3rd edition transition), ISO 14971 compliance and the recent changes involving the MDD. I can educate clients on the upcoming RoHS 2 directive and the potential impacts to their product line(s). Additionally, I leverage a combination of lean manufacturing techniques with failure analysis reporting to streamline manufacturing processes, saving clients time and money. I provide comprehensive risk analyses based on proven methods.
I am mechanical design engineer with 4 years product designing experience. Recently i have been designed India's 1st sun-tracker.
Keen and professional engineering company with over 10 years engineering and hardware design experience gained from a diverse range of science and industry environments.
4+ years as the lead technologist for both Lucent Technologies and Agere Systems (including all of Bell Labs) in the area of heat transfer in level-zero and level-one electronics interconnect. 7+ years in electronics interconnect engineering. BS & MS Physics, Lehigh University, Bethlehem PA Specialties: Heat Transfer Measurement and Theory Technical risk assessment methodologies Design of Experiment / Simulation (DoE, DoS) Experience on standards committee (JEDEC) and top industrial conference (SEMI-THERM) Finite Element Analysis (FEA) Computational Fluid Dynamics (CFD) Non-linear Dynamics and Stochastic process modeling Quantum Mechanics Semi-Classical Physics Integrated Circuit "Packaging" and Interconnect
Bachelor of Science with a first-class Physics degree. Studied Audio and Audio production for two and a half years as a personal obsession. Well versed in recording, editing, mixing, and repairing audio with the wide range of high-grade tools available nowadays in this field. Recently began programming in Visual Basic for Applications, using SQL connections within and interrogating other data sources for analysis.
AliQuantum is a fast-growing business focused on providing exceptional services in architectural design and civil engineering. Our harmonious team has more than ten years of remarkable training and experience in Architectural design, CAD drafting, 3-D Modelling, field supervision and engineering. AQ team focuses on providing the highest level of professional products and services. We will work with your specifications, content and desires to create the best product and deliver the highest level of services. We will customize our bids and service to the specific job and work diligently toward your desired goals.
GIS/Cad/GPS/GNSS/WEB EXPERT/Services Mapinfo, Quantum GiS, Autocad, Idrisi, TNTmips, CadRaster, Digitizing
I am an independent consultant specialising in modelling and analysis of complex physical systems, and in electronics design. I have a PhD in the field of micro-opto-electromechanical systems (MOEMS), combined with a broad background in electronics and physics, and a special attraction to nonlinear systems. I have 12 years of experience as electronics design engineer and physicist in industry and the academy. My main interests include Analogue Design, Multiphysics Modelling, Nonlinear Dynamics, Physics of Microsystems, Quantum and Mesoscale Electronics,
PhD to be. Chemical engineer. Master's in Precise Organic Synthesis and Bachelor's in Nuclear Chemistry. 7+ years of competitive lab experience - formulation, synthesis, analysis. Managed people. Educated people. Project led. More than 20 finished international science projects.
I'm studying for PhD in quantum computing. I have a Bachelor's in Engineering Physics.
Currently I am working full time doing PCB and cable prototyping for a company that is 30000 strong and am not seeking another full time permanent position. I have designed many PCB's with various design tools such as Cadence ORCAD, Mentor Graphics PADS, and Altium Designer. Currently have a license for Altium Designer and would like to use it to do layout work to supplement my income. If there is a different tool that you prefer me to use for PCB design, then I am sure that I could learn it and output a design with it within a week or so.
I'm interior designer. For four years I have beend designing mostly bathroom and kitchen design. I want to do more, and to make whole interiors. I've been working with best Italian Firms for ceramiccs, and sanitary wear.
My research work is in Laser Physics and Quantum Optics. Having vast experience of O/A level (Cambridge and Oxford) Physics. Can teach to any level, pre-O level, A level, Graduate students and also junior students. Currently residing in Pakistan and wish to settle in Saudi Arabia or Dubai for job as Physics Teacher.
Diverse and progressive experience in Mechanical Design Engineering. Solid knowledge of manufacturing processes and practices such as injection molding, die casting, metal and plastic extruding and sheet metal development. I currently have 3D printing capabilities for checking design concepts. Experienced in coordinating the fabrication of injection molding tooling being produced in the US and abroad, utilizing solid model files in lieu of traditional 2D drawings. I am well versed in stress analysis utilizing both long hand and FEA methods.
Being in the profession for 6 years, have worked on projects of varied nature such as Residential, Commercial, Offices, Malls, Institutional, Integrated Townships and Special Development Schemes. The quantum of project work handled exceeds 10 mn sq.ft. of development area. Having been involved in design at both micro and macro level, and interacting with clients to understand their needs, all this gives me the objective to sensitively seek the needs & requirements of the client at all stages of design. As a design professional, my constant quest is to provide sustainability and maximize efficiency of the project through design intervention. Key Result Areas: 01. Concept Design & detailed design as per local building bye-laws 02. Master Planning 03. Sustainable Design 03. Preparing detailed Design Guidelines 04. Presentations 05. High-rise approval 06. Environmental approval 07. Feasibility & Strategic Planning 08. Project Phasing & design optimization 09. Finalization of finishes &
Geospatial Scientist and Software Specialist, proficient in GIS, CAD, cartographic design, creation, and interpretation. Fluent in a multitude of programming languages including SQL, VBA, VBA.NET, C, C++, and C#. Demonstrated ability in the management of a multitude of database systems.Â Strong background in the electric utility and land surveying fields. Extremely strong data management and organizational skills. Strong in using open source applications such as PostSGL and Quantum GIS.
Mechanical Engineer with 25 yrs of design and analysis experience on a variety of projects ranging from copier sub-system design to space planes. I have a Master's Degree in Mechanical Engineering, a PE, and a Top Secret clearance. I have a proven track record in problem solving and innovation as demonstrated by seven US patents on products in a variety of industries. Interested in small and large projects-
Now retired, Brian earned a PhD in physics (U of Ill), and also has MS-level expertise in math. In the basic research group at Sandia Labs, he served as a general specialist, working on projects ranging from semiconductors and quantum computing to engineering failure analysis. He also practiced patent law and technology transfer at Sandia, becoming a US Patent Agent in the process. He also served as Director for NSFÂs Materials Theory program, worked on the team who discovered the cause of the Columbia Shuttle accident, and founded a pharmaceutical research company. Brian is now a consultant in scientific research and patent law. He is also active as a science and legal writer, as well as serving as a consultant in science and engineering. In his spare time, Brian is an opera tenor, a ham radio operator, enjoys reading and writing sci-fi stories, and has worked as a lapidary/jeweler.
I am a Steel Structural Designer with expertise in making 3D Modeling, Erection, Design and Fabrication Drawings. More than 15 years of experience in the field of Steel Structural Engineering working with Onshore Multi-level Industrial Structures, Production Platforms, pipe rack, boiler supporting structure, etc.
I am a common sense analytical with a mixture of office and industrial field experience who is passionate to work with a team providing innovative and quality solutions. I have over 12 years of automation and controls experience including project phases such as design basis, FEED, detailed engineering, testing, commissioning and maintenance as well as working for a producer, vendor, integrator and engineering company. I have a strong field background and proficiency with Honeywell DCS, Modicon PLC and Allen Bradley PLC systems. I have excellent programming, troubleshooting and debugging skills and tend to think outside the box. I strive for value creation and technical excellence without compromising on safety and quality. When faced with challenges I remain positive, patient, forward looking and do what can be done to get things done. I have supporting experience in information technology, software development and research.
I have over four years experience with the C/C++ programming languages and basic knowledge of Ubuntu Linux with the ability to create custom libraries using the GNU compiler. I have a basic knowledge of how to use the X11 programming library with the C programming language. My skills in Mathematics are up to advanced differential equations (i.e. graduate levels of computation) along with a strong knowledge of physics up to the study of an undergraduate level of modern physics, also known as the basis for quantum mechanics.
To whom it may concern, I hold a PhD in Theoretical Condense Matter Physics. I have an engineer degree (industrial engineer) where I specialized in Financial and Mathematical modelling. During my PhD studies I have done theoretical modelling of many-folds equations (mainly Gross-Pitaevskii and Ginzburg-Landau like equations in the weak and strong formulation). I have also developed models in the Quantum Field theory, although in the approximations mostly used in Condense Matter as RPA. In the same field I have numerically simulated these equations in COMSOL, Matlab, FreeFEM++ and Mathematica.
I am a professional into the area of GIS. I have extensive experience working with programs like ArcGIS, Arcview, GvSig, Quantum GIS, Global Mapper, Erdas and AutoCad, I also have good skills on Word and Excel. I am working in a study of engineering that focuses primarily on field analysis, either to identify hydraulic projects or to make recognition of the different landscapes and soil types found in the field. I want to work online to expand my experience in GIS.
My current research focuses on the integration of computer modeling and pharmacological testing of compounds to identify novel leads for the G Protein-Coupled cannabinoid receptors CB1 and CB2, which have been shown to regulate a broad spectrum of physiological conditions from regulating appetite to pain.
Currently working as Executive Safeguarding Engineering - Instrument & Control Systems at PETRONAS Sdn Bhd. Vitals are as under: Ã¢ÂÂ¢ Total Professional Experience: 14 Years Ã¢ÂÂ¢ Certified TÃÂV Functional Safety Engineer (TÃÂV Certification #: 5194 / 12) Ã¢ÂÂ¢ Design Reviews under Petronas Technical Standards (PTS) Ã¢ÂÂ¢ Certified HAZOP Appreciator by ICI, Pakistan and have participated both in national and international HAZOP workshops e.g. UOP (Antwerp, Belgium), Eni (Karachi, Pakistan), Descon (Lahore, Pakistan) and OMV (Islamabad, Pakistan) Ã¢ÂÂ¢ Safety Instrumented Systems (SIS), SIL and SCEs Identification and Maintenance Ã¢ÂÂ¢ Expert Programmer and Systems Integrator. Hands-on Experience with almost all industrially renowned control systems including Process Control, Safety Systems, ESD and F&G system, SCADA, various PLCs and DCS platforms. Ã¢ÂÂ¢ Well versed with TUV guidelines & API RPs regarding Fire & Gas / Process Controls Ã¢ÂÂ¢ Hands-on experience a
With over 6 years experience in the rapid prototyping/3-D printing industry, I will guide you from conceptual design to pre-production. I can offer advice on what the best method for manufacturing your product is while meeting deadlines and communicating thouroghly. Your satisfaction is my priority.
Hi, I am Alex, I majored in nanoscience and photonics as a top of class student at School of Electrical Engineering at Belgrade University Serbia. I have experience in matlab, math, physics, quantum mechanics and optical telecommunications. My practical experiences includean internship at the photonics group at VUB in Brussels. I gained very useful experience in numerical solving of non-linear differential equations. In two months time I was able to completely understand the numerical method and optimize the matlab code (I reduced simulation time from 6hours to 10minutes). I am also familiar with numerical solving of differential equations in matalb and optical telecommunications engineering (Optisystem Software and matlab).
Short description about yourself or your company
I am very active engineer who has the innovation to create, upgrade and develop many things in many fields. My main success simply is customer satisfaction, I understand the customer need, study, analyze, recommend, implement and maintain. I am very highly experiensed Electrical/Automation Engineer. I am one of highly recognized Automation Engineers in worldwide international company.I have my own methodologies of developing PLC and SCADA systems. Whenever you have big challenge, I will find the right solution. I am one of the best fit worldwide in the following systems: Modicon PLCs (M580, M340, Quantum) , Unity Pro StruxureWare SCADA Expert Vijeo Citect Wonderware System Platform Magelis HMI, Vijeio Designer, Vijeo XD Variable Speed Drives Modbus TCP, Ethernet IP
I have over 30 years of experience with engineering and high performance thermoplastics, polymer applications development, and high performance film extrusion on all fronts - sales. marketing, business development, and manufacturing.
Relevant Technical Experience 2001 - Current Â Hands on experience with preparing and imaging organic / inorganic blend samples with scanning electron microscopy (SEM) Â Experience with a variety of experimental analysis tools, analysis in research and development (R&D) including transmission electron microscopy (TEM) Â Research and development in lab environment for 12 years Â Nine years of experience developing new funding opportunities Â Research and Development Coordinator : Manage day-to-day R&D tasks, program reporting directly with customers, technical leads and management, detailed technical analysis, tracking and reporting of budget, program details, detailed reporting Â R&D Principle Investigator (PI): Budget Range $200K - $1M, Multidisciplinary, Multi-Site, Multi-Company Â Research Areas: Transparent solution deposited electronics, Polymers (Conductive and Non-Conducting), Electro-Magnetic (EM) Spectrum: Infrared (IR): NIR, MWIR, LWIR, Visual (Vis), Multi-Apertur
20 years experience factory automation, industrial automation and control systems. CitectSCADA, Integraxor, PcVue, Siemens Simatic S7, Beckhoff TwinCAT, Telemecanique TSX Micro / Premium, Modicon TSX Quantum,
-Winning three Consumer Electronics awards in 2006, 2007, and 2008. More information: tansodesign.com - Has had taken a leading role in development new ideas and driving innovation, making a significant impact on quality at Jasco Products/GE. - 15 years in industrial design field.
Moret than 15 years working as Control System Engineer. Familiar with Allen Bradley PLC, Siemens PLC, Schnedier PLC, Citect, WinCC, Wonderware, RSView, FTView, PanelView, Industrial Networking, Instrumentation.
I am an experienced GeoInformation & Data Systems Specialist. I use a range of GIS and remote sensing software in research, mapping and development. These include, Esri ArcGIS, Erdas Imagine, ENVI, Mapwindow and Quantum GIS. For spatial database management, I work with PostgreSQL, Multi-user Geodatabases of ArcGIS, SQL Server and MySQL. I am well conversant with Server applications for sharing geospatial data and I majorly use OpenGeo suite for applications development. I use Geoserver and ArcGIS server to publish and share mapping services. As a researcher, I have a very good working experience in statistical analysis for both social and spatial data. I use SPSS for social statistics and R majorly for Geostatistics. My career objective is to be the best GeoInformation specialist around the world with command in Desktop GIS, Geostatistics, Web Mapping and Spatial database management.
11 years solid experiences in embedded systems, firmware, micro electronics, native operating system, RTOS and system integration. 6 years working with applied automation technology such as green building (BAS, IBMS), energy management system and smart grid. Good knowledge on PLC, DDC, MODBUS, BACnet, Lonworks, OPC, and DNP3 communication protocol. 5 years working on smart card industry domain especially on telecom, secure ID and micro payment applications. involving on Leadership, smart card operating system architecture design, smart card custom application and operating system portation.
Â Proficient with ArcMap 10.1,MapInfo,Quantum GIS AutoCAD 2012, AutoCAD Architectural, SpatialNet Inventor 2008, Rivet Architectural 2010, and Photoshop CS3 Â Ability to adapt quickly to internal software, and fully utilize programs such as Microsoft Word, Access, Excel and Power Point Â Engineering graphics: designing all types of machinery, weld type drawings, and mechanisms such as gears, bearings, screws, and linkages Â Physical and 3D modeling: rendering, materials, lights, and cameras Â Design all types of floor plans, roof plans, and elevations Â Residential architectural design, wall sections and details. Â Able to read and convert blueprints into various databases abroad. Â Work with text, graphics, audio, animations, videos Â Fluent regarding legal issues involved when using digital information
i can deliver quality results of the projects with the following tasks: Physics,mathematics,electronics,digital electronics,quantum, nanotechnology teaching and content development. Analyzing electronic circuits and designs. Can create /update specific word, pdf and ms power point presentations. Prof reading ,academic writings and transcription of documents.
i am a dynamic person, who has a skills on Physic sciences(mechanic, quantum, hydrodynamic system) and an advance expertise on electronic systems(circuit design,power electronic, processing signal,programming circuit). i have a interesting skills to figure out on problem to improve technology system.
I am a very hard working, highly motivated and passionate Professional Drafter. My experience includes eight+ years of drafting experience utilizing a plethora of programs ranging from Land Development Desktop 2009, most Autodesk Licensed programs and even Microstation V8 . I received my first degree in Computer Aided Drafting and Design Technologies and are only 1 year away from my second degree in Civil Engineering. My work experience ranges from simple red lines to Record Drawing creations to site development and design projects. I have made sure to attended all possible AutoCAD/Autodesk sponsored webinars to stay up to date on all the most resent program additions and features. I will be more that happy to provide clients with a resume prior to the commencement of any project. Thank you for your considerations, B. Rojas
I am a HW / SW engineer holding a German patent and 4 peer reviewed publications. I have 7y+ R&D experience of applications involving hardware, firmware, software and optics. 10y experience of process control in a petrochemical industry and 4y experience of teaching Software Engineering, Software Quality Assurance and Software Project Management subjects.
Profesional capacitado para desarrollar proyectos de ingenierÃÂÃÂa con ÃÂÃÂ©tica profesional y bajo los estÃÂÃÂ¡ndares del PMI, en las ÃÂÃÂ¡reas de Control AutomÃÂÃÂ¡tico de Procesos, InstrumentaciÃÂÃÂ³n Industrial, RobÃÂÃÂ³tica, Redes de ComunicaciÃÂÃÂ³n y ElectrÃÂÃÂ³nica. Con experiencia en elaboraciÃÂÃÂ³n de IngenierÃÂÃÂa bÃÂÃÂ¡sica, conceptual y de detalle, ProgramaciÃÂÃÂ³n de PAC, PLC y Variadores de frecuencia para control de motores.
I am Mr. M.Laid Tadjine. I prepare My PhD thesis in theoretical physics (Modelling and simulation ) and hold a Master of Science in Physics of Materials and companents/ Emphasis: Physics of Ultrasound and Metallurgy ,from the Department of Physics at USTHB University, Algeria. i was as Intern at the National Welding and Testing Research Center (Alger), while preparing for a final project for Master Degree/ USTHB . My dissertation was (piezoelectric transformer characterization). during this training, i improved my skills such as ; Simulation softwares ,Programming languages, Lab tools and communication skills and ability to work individual or in a team environment. I have fluent spoken and written English, German ,French and Arabic. Graduation in BSc in fundamental Physics has provided me a strong foundation in quantum physics, thermodynamics, mechanics and statistical physics. My dissertation for the BSc was in the electronic PCB Design area .
I have a Master Degree in Architectural Engineering and have 6 years experience in Autocad 2D and 3D drawings, SketchUp, 3Ds Max and Lumion. I have worked on numerous architectural projects of houses, kitchens, floor plans, sections, construction details, views, etc. I can provide a high quality job in a quick time. 3d animations (walk through): https://vimeo.com/144634615 https://vimeo.com/144622037 https://vimeo.com/137524047 https://vimeo.com/137701897 https://vimeo.com/133169693 https://vimeo.com/122000935 https://vimeo.com/116368850
Providing complete web or desktop oriented GIS solutions.
I possess a Doctorates degree in Biotechnology, Masters degree in Theoretical & Computational Chemistry. I have over 15 years work experience with scientific research fields and engineering design.
Design and build variety of industrial electronic controller boards upon costumer requests. Adding Human Man Interface (HMI) by retrofitting existing machines and process controllers without replacing them with new system which reduces investment costs and adding productivity. I am located in Dallas Fort Worth ,Texas and willing to travel inside United States.
A chartered chemical engineer (MEng, PhD, CEng, MIChemE) with over 10 years of experience in chemical product design and chemical process development gained within R&D leadership roles in industry/academia. Extensive experience as an independent consultant providing value-added expertise and technology transfer to multinational companies and SMEs in the pharmaceuticals and materials sectors. Over 7 years' experience lecturing at university level in chemical engineering courses, including: mass transfer, separation process, chemical process design, chemical product design, reaction engineering, chemical process safety, waste minimization, ISO 9001 quality management, ISO 14001 environmental management.
I am Chartered Quantity Surveyor, who has worked within construction industry for the last 13 years on various types of project.
Management consultant and trainer with over 17 years of diverse experience with some of the leading organizations in the world. Certified Six Sigma Black Belt (CSSBB) Certified Quality Engineer (CQE) Lean Implementation Leader
Geographer with background in GIS (i worked in a development team of a GIS software), passionate about maps and with an artistic sense.
Freelance Robotics provides services in Robotics, I.T. (Information Technology), A.I. (Artificial Intelligence), Mechanics, Control and Physics. Freelance Robotics will build prototypes for you as well as offer consultancy services. Freelance Robotics has services available at an affordable price.
#1 RANK INDUSTRIAL DESIGNER ON ELANCE. 29 years experience. Award-winning product designer with focus on product styling, 3D modeling and rendering, production engineering, plastic part design, rapid prototypes, applied graphics, ergonomics, and control surface design of consumer and professional products.
Result-oriented and skilled BI, GIS and QA professional with more than 12 years of experience of the technical field, the excellent knowledge of software development and data architecture assurance, integrated GIS solution and BI data analysis, integrity methodology.