The client has made the following changes to the job.
Client prefers freelancers from:
You are still able to submit a proposal for this job.
The client prefers freelancers from
a different location.
Buyer is seeking experienced Microchip PIC developer to create a basic development board, and associated firmware, using the PIC18F97J60 series microcontroller.
Functional requirements for the board will be:
1.) Fit on a 3.8" x 2.5" two-layer PCB
2.) Have a fully functional "TCP/IP Stack Demo Application", including any modifications needed to run on the PIC18F97J60 series. This includes the click-to-toggle function, network configuration, email sending, DDNS, etc.
3.) Have a fully functional USB-Serial Port using the FTDI 232R. Ideally, a bootloader will allow the user to update the board's firmware via USB.
4.) Have a set of four LED's on board, which the user can toggle via theweb interface.
5.) Have a set of four digital inputs wired out to an eight-pin I/O header for external switch inputs. Input status should be displaed via the web interface.
6.) Have a measured voltage displayed on the web interface, adjusted using an on-board potentiometer
Sign in or Register to see more