With 1.7 million freelancers, we'll match you with the perfect talent.
The client has made the following changes to the job.
Client prefers freelancers from:
You are still able to submit a proposal for this job.
The client prefers freelancers from
a different location.
I need a Microchip PIC based circuit schematic designed and PCB layout produced. The design files need to be opened ysing the free version of Eagle CAD.
The circuit is to be based on the PIC24FJ128GA010-I/PT and must use an oscillator to run at it's maximum speed.
Should accept input voltage between 6V and 12V, the connector should be two pads large enough to solder power cables to.
A regulated 5V line must be available and should be able to supply at least 1 Amp.
One SPI bus available through a conerfacenector.
Two I2C bus' available one with two connectors, the other with one connector.
Three status LED's
PC interface: Suitable interface for programming using the ds30 bootloader ( [obscured] -ip.org/elektronik/ds30loader/index.php). If possible an RS232 connection to the PIC and a USB connection to the PC which shows as a COM port.
ICSP suitable for PICkit 3
One 8bit GPIO port going out to header pins.
One 8bit GPIO port going out to header pins suitable ...
Sign in or Register to see more