Save this Search
     

All JobsEngineering & Manufacturing

 (556 results)  
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 28 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I already have a finalized tech pack of a very specific shirt design and I need to now produce samples using different variations of fabrics until I arrive at the ideal product. This is a shirt for adventure. Fabrics used will be nylon & spandex blended together (92% nylon / 8% spandex) and I will use micro nylon rip stop for the yoke of the shirt. Cargo and zippered pockets are an essential part of the design. There is a vented mesh on the back pleat of the shirt. While the aesthetics of the shirt are vital, the most essential part is the technical elements of the shirt. The pockets and the quality of sewing are of upmost importance. This is designed for the outdoors, not to make a fashion statement. Please only contact me if you have experience with active wear and sowing with nylon fabrics. Thanks and look forward to finding the right candidate for this job.
Category: Product Design       

w****isz
 [?]
Sign in to view client's details.
| w****isz
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 29 minutes ago  |  Ends: 2d, 23h  |   2 Proposals
I have a 3D model created and want to get a ceramic model made for it. Just need someone to hollow it out to meet the requirements needed to get it printed. File attached
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

C****n12
 [?]
Sign in to view client's details.
| C****n12
|    United States
Hourly Rate: $50 - $75 / hr   |  Duration: Not Sure  |  Posted: 2h, 31m ago  |  Ends: 14d, 21h  |   7 Proposals
Detail structural or component shop drawings ? general minor but also redline as built drawings for general mechanical work.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

S****ing
 [?]
Sign in to view client's details.
| S****ing
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 48m ago  |  Ends: 6d, 21h  |   2 Proposals
Design all electronics for a sensor that use a voice recognition module. See attached PDF for manufacturer. Can use an alternative module, but needs to receive english words. This module uses pre-programmed typed words that systems listens for. Other modules need to be trained. Would consider other modules, but design fee needs to include simple method to activate voice training. When module detects words- data of this will be sent over TCP/IP via wifi to our server. It would send sensor ID, event, date, and time. Currently we a re using ESP8266 for wifi in other sensors. Good low cost. The sensor will need a method to connect it to the wifi network. Bluetooth or other very simple method. Creating the app to accomplish this should be included. All firmware to be included. The bid should include building 3 test units and all documentation for sourcing in for production in China.
Category: Electrical       
Skills: Electrical Engineering, TCP/IP, Electronics       

J****erg
 [?]
Sign in to view client's details.
| J****erg
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 29m ago  |  Ends: 14d, 20h  |   1 Proposal
Hello, I am exploring whether cell phones could be used to image molecular recognition events using terbium FRET (fluorescence resonance energy transfer). Some work has been done with cell phones:   [obscured]  /460802/Cost-effective_and_compact_wide-field_fluorescent_imaging_on_a_cell-phone Here are the specs for terbium FRET using conventional equipment: Excitation at 311 nm, delay 0.1 ms, gate time 1 ms, excitation and emission slit 8 nm, emission measured at 543 nm. The camera would need to take the picture 100 ms after the flash. Could this be done cheaply with cell phones? I dont know how much work this involves, thanks for your help, Paul
Category: Other - Engineering &...       

o****555
 [?]
Sign in to view client's details.
| o****555
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 29m ago  |  Ends: 14d, 20h  |   9 Proposals
I would like drawings showing a remodel of an existing kitchen. I have a drawing from a designer from a year ago that I am happy with, but needs some adjusting. I can send send the drawings. I will also include the specs for all of the new appliances. Let me know if this is a good fit for you. Thanks, Rich
Category: Interior Design       
Skills: Architecture, AutoCAD, Interior Design       

S****lbo
 [?]
Sign in to view client's details.
| S****lbo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 42m ago  |  Ends: 14d, 20h  |   0 Proposals
Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,
Category: Civil & Structural       

b****leb
 [?]
Sign in to view client's details.
| b****leb
|    United Arab Emirates
Hourly Rate: $50 - $75 / hr   |  Duration: Not Sure  |  Posted: 3h, 43m ago  |  Ends: 14d, 20h  |   7 Proposals
Detail structural or component shop drawings ? general minor but also redline as built drawings for general mechanical work.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

S****ing
 [?]
Sign in to view client's details.
| S****ing
|    United States
Fixed Price: $20 - $30   |  Posted: 3h, 48m ago  |  Ends: 1d, 20h  |   17 Proposals
I will send a plan of an apartment 70mē I need a floor plan 1:100 1:50 showing measurements, mē of each room Each room titled. + a furnitured version + interior design plan version of Living room, and bed room I will provide all plans in original file. Need asap
Category: Architecture       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 4m ago  |  Ends: 14d, 19h  |   5 Proposals
I want to get a mobile device made which is just a basic GSM mobile phone with no keypad, display etc but with extra battery life and a few LED (or other type of) lights that blink for an incoming call or when battery is low. This is for a business idea I have. Can you help prototype this, which I can present to manufacturers ?
Category: Other - Engineering &...       

s****ama
 [?]
Sign in to view client's details.
| s****ama
|    United States
Fixed Price: Not Sure   |  Posted: 4h, 44m ago  |  Ends: 14d, 19h  |   0 Proposals
New blended formulation needs a description for utility patent filing. Should have a lab where you can make a small sample or two. Only USA or Canada based due to IP restrictions.
Category: Chemical Engineering       
Preferred Location: North America

H****360
 [?]
Sign in to view client's details.
| H****360
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 49m ago  |  Ends: 14d, 19h  |   7 Proposals
Hello Everyone! I need a Finite Element Analysis done for a project of mine that's based on composite structures. Basically, what I need is to be able to simulate the stress on a solid structure made of a number of homogeneous composite layers (say 50 layers) stacked one over the other. Each layer is made of rasters (fibers) oriented in a particular direction (say -45-45) with/without any air gap. For a better understanding of the layer, please see the attached image. The FEA package can be anything as long as it can provide the simulation. About the payment arrangements, we can discuss it personally once I find the right guy. Thank you for your time. KP
Category: 3D Modelling       
Skills: ANSYS, BASIC, Finite Element Analysis, Abaqus       

m****hna
 [?]
Sign in to view client's details.
| m****hna
|    United States
Fixed Price: About $20   |  Posted: 4h, 58m ago  |  Ends: 14d, 19h  |   9 Proposals
I have Solidworks Files and Assemblies that were made in an older Solidworks (2013 or newer) version. I need someone that will convert these files into files that will open in my 2012 Solidworks version. Looking for this to be completed immediately within the next hour. Should take about 10 minutes.
Category: 3D Modelling       
Skills: SolidWorks       

J****-NY
 [?]
Sign in to view client's details.
| J****-NY
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 16m ago  |  Ends: 14d, 18h  |   4 Proposals
Hello, I'm looking to create an electronic TV Box from scratch and require help with anyone in the industry to assist with building the BOM and Gerber files for the build so I can provide to a PCB manufacturer in China. Brief high level list of component are below: Amlogic S802 - Quad Core A9 CPU Amlogic S802 - Mali-450 Octocore GPU Broadcom 5G Wi-Fi chipset Memory: 4GB DDR3 Storage: 16GB Flash Storage Wifi: Broadcom 5G 802.11 Dual Band Ethernet Port: 10/100/1000 Full Duplex Port USB: 4.0 Low Power, full speed Bluetooth - Bluetooth V4.0 Mouse/ Keyboard Support Card reader: SD/SDHC/MMC cards OS: Linux or Android Front Display: Time/Clock, Power Button LED - Red - ON / Blue - Off, Wifi/Ethernet LED All work required to produce the board in a functional manner is needed from this job. Thank you, Dan
Category: Product Design       

d****dzc
 [?]
Sign in to view client's details.
| d****dzc
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 55m ago  |  Ends: 14d, 18h  |   1 Proposal
I need a forensic lab to make analysis of some products for me to check if they were made at the same factory. as soon as possible.
Category: Other - Engineering &...       

P****ist
 [?]
Sign in to view client's details.
| P****ist
|    Nigeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 6m ago  |  Ends: 14d, 17h  |   8 Proposals
I have a working prototype for a product. It is a 3 inche long tube made of silicone. A protective sheath that that fits two fingers. I need an AutoCAD or similar file made in order to have this device reproduced. Acceptable file formats are:IGES (.igs), (.stp), SolidWorks (.sldprt), PTC Creo (.prt), Parasolid (.x_t and .x_b), ACIS (.sat) AutoCAD (.dwg, 3D only), Autodesk Inventor (.ipt) I would like to work with someone that is close to Minneapolis. I would like to provide the designer with the physical prototype to recreate. Cost is negotiable. I will pay more for fast turn around
Category: 3D Modelling       
Skills: Autodesk Inventor, AutoCAD, SolidWorks       

j****rai
 [?]
Sign in to view client's details.
| j****rai
|    United States
Fixed Price: Less than $500   |  Posted: 6h, 19m ago  |  Ends: 14d, 17h  |   2 Proposals
My homeowners and property management company came to do a home inspection and we had a hard time hearing the sound from our Canary Home Surveillance video. The walk through was short with only 15-20 minutes of video. There was a lot of static in the background and the sound may need to be raised a little bit but we just need someone who can take the files we have and make them more audible. Think you can make surveillance sound better?
Category: Other - Engineering &...       

m****004
 [?]
Sign in to view client's details.
| m****004
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 45m ago  |  Ends: 14d, 17h  |   4 Proposals
I just built a steel structure for a second floor for a former 20' high automotive shop. We are currently in the process of pouring a floor. I would like to hire the services of a structural engineer to specify headers for a door and about 8 windows that I am cutting into 8" concrete block. While this may be out of the purview of a structural engineer I need advice on fire codes for a staircase, and the construction of walls for offices occupied by separate tenants. The project is in New York State
Category: Civil & Structural       

p****jbn
 [?]
Sign in to view client's details.
| p****jbn
|    United States
Fixed Price: Less than $500   |  Posted: 6h, 57m ago  |  Ends: 14d, 17h  |   0 Proposals
Hi there, we have some sound effects created for our Bluetooth device. We are using the Nordic 51822 chip which is written in C. We are having difficulties integrating the WAV/MIDI file into the firmware. We need help with someone experience in working with embedded systems and able to convert the sound effects into a format that can be used in the Nordic firmware to play the sound. The device is small and therefore the speaker is limited to a more mono synth tone with frequency range of to 3800 Hz to 4200 Hz.
Category: Other - Engineering &...       

W****uvo
 [?]
Sign in to view client's details.
| W****uvo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 58m ago  |  Ends: 14d, 17h  |   5 Proposals
I have a PCB, and LED and the shell of a keychain. The keychain has one button and around the button is a led guide, see attached. I need from you to help us select the best LED, to change the design of the light guide, so that the Light will be correctly transmitted and covers with the same strength over all the light guide. At the same time we will need a recommendation on the best material to use on the light guide.
Category: Other - Engineering &...       

d****ock
 [?]
Sign in to view client's details.
| d****ock
|    Morocco
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 14m ago  |  Ends: 14d, 16h  |   0 Proposals
We wish to have a thermal test done on our new lighting collection "Crisp". Here are the parameters: Test range of ambient temperatures -Warm (20-45 C / 68-113 F) -At 5 C increments Material and Product specs included in Package - Light engine spec sheet, , assembly materials) - thermal paste Test with Gypsum Drywall & Junction Box in worst condition (upside down already positioned in SolidWorks Assembly-Materials have been assigned to part files - Use "CP-CFM Crisp with mount thermal rO" for testing) Deliverables -Cut away section views of complete assembly w thermal shading at each 5C increment -Specific point temperatures indicated at IC, LED, and hottest point on assembly Assumptions -Typical convective air flow (no wind etc) Timelines - Testing completed for Firday July 3, 2015 - Monday July 6,2015
Category: Mechanical       

T****RBW
 [?]
Sign in to view client's details.
| T****RBW
|    United States
Fixed Price: $100 - $150   |  Posted: 7h, 42m ago  |  Ends: 14d, 16h  |   8 Proposals
We have a requirement for a freelancer to create a PCB Layout for a development board. We have a schematic and a design file in RS-Online's PCB software "DesignSpark". The PCB Layout can be created in DesignSpark or Eagle and it must be to a manufacture's standard so that we can have it made. It must have all masks, screens etc. The Board is to be 2 layer. We have a PCB file already which needs someone with experience in PCB design and layout to look at it and improve it.
Category: CAD       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia

U****ies
 [?]
Sign in to view client's details.
| U****ies
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 7h, 55m ago  |  Ends: 14d, 16h  |   7 Proposals
I need help with the Heat Transfer and i need experts that understand the book that is attached here. The detailed work will be provided, please let me know your email address. Thanks
Category: Mechanical       
Skills: Mechanical Engineering       

d****705
 [?]
Sign in to view client's details.
| d****705
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 20m ago  |  Ends: 14d, 15h  |   13 Proposals
Design of a mechanical component that will be part of a product. Prototyping and testing are required to ensure that the component will withstand cyclical stress. Please note that an NDA form should be signed prior to starting work. Kindly contact me by phone or email for further details: email:   [obscured]  
Category: Product Design       

n****abr
 [?]
Sign in to view client's details.
| n****abr
|    United Arab Emirates
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job