Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $600   |  Posted: Apr 17, 2014  |  Ends: 8h, 1m  |   6 Proposals
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. I will consider foreign architects only if you have knowledge of IRC and have worked on plans for other US clients in the past. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you. My budget for this job is $600(ID: 557...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 21h, 2m  |   31 Proposals
I require a simple, professional 2D floor plan of my facility. I have attached a draft of (roughly) what I envisage the facility to look like: see 'Floor Plan.doc' To give you an idea of the specifications of each unit I have attached an image: 'Unit Dimensions.jpg'. These are the only dimensions I have but from these you should be able to estimate the required size of the remainder of the facility. - Store room and bathroom only really have to be 2m x 2m - Please add a front double door - Use colour if you wish - Please make any changes / additions you see fit - Let me know if you have any questions
Category: CAD       

B****oli
 [?]
Sign in to view client's details.
| B****oli
|    Australia
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 15h, 27m  |   24 Proposals
542 entries. Input the names, addresses and telephone numbers into a spreadsheet, either Excel or a Google Sheet (which I will grant access to). Below is a typical data sample. Fields would be last name, first name, street, city, state, zip, tel#, fax#, email address, accreditation. Data Sample: Zumwalt, Robert (914)238-5973 (914)238-6903   [obscured]   47 Spring Lane Chappaqua, NY 10514 Click for map to address AIA Again, 542 of these, looking for a price for the entire project and how quickly you can do it. These items can also be cut and pasted into the spreadsheet. Thanks
Category: Electrical       
Skills: Data Entry, Microsoft Excel, Computer Skills       

u****199
 [?]
Sign in to view client's details.
| u****199
|    Pakistan
Fixed Price: $1,000 - $5,000   |  Posted: Apr 16, 2014  |  Ends: 14h, 53m  |   0 Proposals
I need to install a 75 to 90 foot golf netting to protect a home on the golf course. This will include materials and labor. HOA approval is in the making. The design and materials are being gathered. Need assistance in application.
Category: Product Design       

j****ads
 [?]
Sign in to view client's details.
| j****ads
|    United States
Fixed Price: $200 - $300   |  Posted: Apr 12, 2014  |  Ends: 21h, 2m  |   11 Proposals
I'm in need of a CAD designer or anyone with experience who can provide a gas piping and electrical plans with load calculations.
Category: Electrical       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Apr 12, 2014  |  Ends: 7h, 54m  |   11 Proposals
We are a start-up cosmetic business based in Australia. Our product uses a range of natural ingredients such as coconut oil, honey and essential oils. I'm currently searching for an experienced formulation chemist to provide formulation and shelf-life extension advice on an ad-hoc basis via email, phone and Skype. Initially seeking advice / consultancy on the formulation and stability of our product - ultimately looking for a long term working relationship (3 months plus). Experience in the Natural cosmetic field is essential. Specific requirements: If you have experience with cosmetic product formulation, particularly in the areas of shelf-life extension and access to key contacts in the cosmetic industry, please send through your CV and proposal along with your hourly rate. Initially, I would like to discuss the work via private message and Skype, I'm happy to pay per hour for your time once the scope of the project has been mutually agreed upon. Selection: I'm looking fo...
Category: Chemical Engineering       

A****ics
 [?]
Sign in to view client's details.
| A****ics
|    Australia
Fixed Price: $70 - $125   |  Posted: Apr 04, 2014  |  Ends: 23h, 18m  |   4 Proposals
Hi, I am making a submission for my masters proposal. I have come up with a topic and written a proposal but I would need some one to help look at it for enhancement. I would require someone with knowledge of matlab, Mobile systems, Heterogeneous network based on Macro/Pico and Macro/femto I would be making the final submission by the middle of April so I need to to be done ASAP. Hope to hear from you soon. Regards Brian
Category: Other - Engineering &...       
Skills: MATLAB, Macro/Pico/Femto, Mobile Network       

b****les
 [?]
Sign in to view client's details.
| b****les
|    South Africa
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Apr 04, 2014  |  Ends: 22h, 42m  |   3 Proposals
Need assistance developing a SSRS report for a client. I would also like some training and guidance around building custom reports. This is something I would hope to have reoccurring meetings to educate myself around SQL Reporting and creating custom reports from data within the configuration manager database. Would like assistance creating 3 specific reports before Monday.
Category: Other - Engineering &...       

d****yjr
 [?]
Sign in to view client's details.
| d****yjr
|    United States
Fixed Price: Less than $500   |  Posted: Apr 04, 2014  |  Ends: 22h, 36m  |   6 Proposals
I have a fortran program and I tried to replace the common blocks using the newer MODULE construction. Data is not visible to subroutines in the MODULE...something is wrong with my code. I need a FORTRAN expert to debug my program and get the new MODULE working.
Category: Other - Engineering &...       
Skills: Fortran, Compiler       

w****r72
 [?]
Sign in to view client's details.
| w****r72
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 04, 2014  |  Ends: 21h, 57m  |   4 Proposals
I need this ring. like picture. .stl or .3dm file. Center 6.48 round stones in file. no hand engraving, plain metal only.
Category: 3D Modelling       
Skills: Zbrush, Rhinoceros 3D, V-Ray, matrix, tsplines       

r****949
 [?]
Sign in to view client's details.
| r****949
Fixed Price: Not Sure   |  Posted: Apr 04, 2014  |  Ends: 19h, 40m  |   0 Proposals
Looking for a app developer must be up to date with latest soft wear hopefully living in south florida
Category: Product Design       
Skills: .NET for Web, App Usability Analysis       

p****e21
 [?]
Sign in to view client's details.
| p****e21
|    United States
Fixed Price: Not Sure   |  Posted: Apr 04, 2014  |  Ends: 16h, 22m  |   28 Proposals
We have idea for umbrella design. That have new style of handle. We need 3D model of handle part. What you get? Your name on the package. Free sample Chance to work with us long term Who we looking for? You need to have experience in product design. Have good skills in 3D modeling of products. We looking for person who really willing to work on this project as a part of the team and to think together with us how to make it better. Because handle part is might be difficult to manufacture, it may take time (up to one month) and you may need to do some changes in 3D model along the way. Please send me your previous works related to product design.
Category: 3D Modelling       
Skills: 3D, 3ds Max, 3D Modeling, 3D Design       

E****rup
 [?]
Sign in to view client's details.
| E****rup
|    China
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 04, 2014  |  Ends: 16h, 18m  |   4 Proposals
hi, I have a new engineering start up - with focus on energy efficiency in construction process. Would like some help on the design and layout. I have created a site using wix.com but it's not that that great.   [obscured]   let me know if interested. thanks!! Sam
Category: Other - Engineering &...       

s****983
 [?]
Sign in to view client's details.
| s****983
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 04, 2014  |  Ends: 16h, 0m  |   14 Proposals
I have a pet industry product that I have successfully built a working prototype proof of concept for, I am currently writing a patent application for several features of it, and I need to hire a reputable and experienced product engineering firm or individual, possibly with industrial design capabilities or contacts (though I do currently have an industrial designer currently retained). Experience with developing electric and motorized home appliance devices through to production is critical. Initial plan is to manufacture small quantities for sale on soft or low volume/cost tooling to test the market demand, but design must be scaleable for larger production runs too. Please submit product portfolio examples, especially for home appliance devices with mechanical features, motors, and electronics if possible. I can provide an NDA to discuss product and project details so applicants can submit quotes.
Category: Product Design       

G****ave
 [?]
Sign in to view client's details.
| G****ave
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 04, 2014  |  Ends: 13h, 47m  |   6 Proposals
MS Dynamics AX implementation for an electromechanical contract project management co. ITS an SMB, modules include financials, invoice, procurement, Project Management and Maintenance and service solution.
Category: Other - Engineering &...       

w****t01
 [?]
Sign in to view client's details.
| w****t01 *
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 04, 2014  |  Ends: 11h, 49m  |   7 Proposals
The Role This is an opportunity to join a newly formed group within the company, making full use of Company's innovative technology and instruments to provide a service to customers to identify and locate network faults before customers are affected. While the service will start as a daytime operation only, it is anticipated that as it and the team expands, it will rapidly become a 24x7 operation. The Fault Analyst position is expected to be standard working hours only. Responsibilities: Learn and utilise company's suite of advanced fault diagnostic tools Identify and define tool improvements for implementation by the Company algorithm group Apply electrical knowledge to identification and location of unusual fault scenarios JOB DESCRIPTION & PERSON SPECIFICATION Recommend next steps and/or installation locations to customers Prepare weekly management reports to meet both internal management and customer needs Review fault location information prior to forwarding to customer ...
Category: Electrical       

B****r01
 [?]
Sign in to view client's details.
| B****r01
|    South Africa
Fixed Price: Not Sure   |  Posted: Apr 04, 2014  |  Ends: 9h, 28m  |   11 Proposals
Postovani, Interesuje me da li radite 3D modelovanje u Autodesku ili Autocadu, radilo bi se o ukrasima od stiropora. Molim Vas ya Vas kontakt kako bismo detaljnije popricali ukoliko ste zainteresovani. Srdacan pozdrav, Aleksandar
Category: 3D Modelling       
Skills: 3D       

A****zic
 [?]
Sign in to view client's details.
| A****zic
|    Serbia
Fixed Price: Not Sure   |  Posted: Apr 04, 2014  |  Ends: 7h, 1m  |   12 Proposals
1. An LED light that needs to be illuminated using wireless communication. 2. Communication frequency to be about 866 Mhz 3. Power to the LED through a battery cassette. 4. Every LED has to have a unique ID - so that these LEDs can be addressed/illuminated from a software. 5. LED has to be RGB, if it is bright enough or has to be two color 6. It should be possible to control flash timing of LED by sending it on and off times 7. It should be possible to control the color of the LED 8. An acknowledgement needs to be sent back to the wireless router , if it is possible. 9. It should be possible to control the luminosity of the LED 10. The LED should react after being sent a signal within 3 seconds. 11. Battery life should be around 150 hours, when the LED is on 12. The project cost is excluding battery and mold. 13. It should be possible to send back the ID of the LED when the Unit is pushed/pressed What we need to know are - 1. Is this project feasible? 2. How much time would be requir...
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics, Wireless       

N****son
 [?]
Sign in to view client's details.
| N****son
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 03, 2014  |  Ends: 5h, 1m  |   4 Proposals
Impel Global requires the services of a competent polymer chemist who has extensive formulating and manufacturing experience with reinforced thermoplastic sheet in thicknesses of up to 60mm, by either compression moulding or extrusion processes. This project will entail that the successful candidate can think 'outside the square' to develop a formula and production process to manufacture thermoplastic sheet products for exterior structural applications to replace traditional plywood or fibreglass products. A broad range of materials (including recycled consumer products) will be considered, to achieve a balance between finished cost, strength, weight, and environmental responsibility. The candidate would ideally have a sound knowledge of reinforcing materials, polymer chemistry, an extensive manufacturing history, and a grasp of the various capacities of manufacturers world-wide. An ability to advise on patents, perform FEA, and liaise fluently with manufacturers, would be benefici...
Category: Chemical Engineering       

I****bal
 [?]
Sign in to view client's details.
| I****bal
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 03, 2014  |  Ends: 1h, 20m  |   35 Proposals
Hi I need an experienced CAD designer that can make realistically buildable output files for Makerbot Replicator 2. Experience with 3d printing is preferred. I have several STL files to draw off of as a starting point of our developments. This is an ongoing per hour job. We will develop and redevelop sketches and previous CAD designs. CADs must output in STL. and must be optimized to realistically build in a 3d printer Please state your charge per hour. Then give me a quote on how long it will take to make this CAD off of this attached sketch. Attached is an stl file for the handle that needs to be resized. arm length is 11" and needs to accomodate male entry from the insert slider piece as well as male entry from other side by attached file end hook tip. Insert slider length is 8.5" x 1" x 1". the squarish 1" x 1" could be slightly smaller to insert into the arm. Contractors will be chosen based on stated performance, availability, and cost.(ID: 5...
Category: 3D Modelling       
Skills: 3D Printing, 3D Design       

m****est
 [?]
Sign in to view client's details.
| m****est
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: Mar 24, 2014  |  Ends: 12h, 7m  |   15 Proposals
We are looking for a candidate for Firmware Engineer. Exp: 2 - 3 years Skills: Embedded C Controllers: Microchip, TI
Category: Other - Engineering &...       
Skills: Embedded Systems, Microcontroller       
Preferred Location: India

l****run
 [?]
Sign in to view client's details.
| l****run
|    India
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Feb 17, 2014  |  Ends: 2h, 22m  |   45 Proposals
To increase our workload capacity we are hiring professionals for manual routing of 2/4 layers PCB using Cadsoft's Eagle. We don't require any electronic design work. We will provide the working files with the components already placed in the best possible position for optimal layout and mass production. We will provide DRUs and standard design rules. We don't accept any kind of automatic routing. PCB must be routed manually, with clean style. We have huge experience with Eagle and we can recognize and automatic routed board in seconds. Don't apply for this job if you think about use automatic routing. Please note that we are experts of PCB routing and we only need additional manpower to fulfill the overload of orders. Avoid to apply for this job if you are not more than confident you can handle it. This is an ongoing job and is paid on hourly basis, not fixed task. We have hundreds of ours of work to assign. If we will find the right professionals, we will award this job to more...
Category: Electrical       

2****ing
 [?]
Sign in to view client's details.
| 2****ing *
|    Hong Kong SAR, PRC
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job