Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 2h, 42m ago  |  Ends: 1d, 21h  |   6 Proposals
We are looking for assistance in creating a design for a new watch case product . The case should have 3 main components inside of it: watch docking station, battery/charger cable area and a location for the watch itself. The docking station should be able to open and fold within the case itself. We have more details regarding this case for the Provider that gets awarded this job. We also have a case that we like that can serve as a basis for the design of our new case although our case has different look and functionality. We also have a rough schematic for this new case for the Provider to review.
Category: Product Design       

j****man
 [?]
Sign in to view client's details.
| j****man
|    United States
Fixed Price: Not Sure   |  Posted: 4h, 33m ago  |  Ends: 14d, 19h  |   2 Proposals
Need Phd or Master Degree in Mechanical Engineering to help me to write a conclusion of some of my work budget is 50$ . 1 day
Category: Mechanical       
Skills: Mechanical Engineering       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: $1,000 - $5,000   |  Posted: 7h, 13m ago  |  Ends: 14d, 16h  |   6 Proposals
We have customers that will want a shoe shine. They will sit on one of those chairs to have a shoe shine. Each treatment is about 10-15 min. There will also be a camera on top of the chair. At the end of the treatment (shoe shine), the customer will pay the operator who did the shoe shine for him. We will ask the operator to key in in the store system the transaction and issue a ticket At the end of the day, to cross check that the operator did not do any treatment without declaring it (ie stealing), we will cross check number of transactions entered in the store system (that issued at ticket), the number of times the seat has detected we had a customer for treatment, and the number of customers detected via the camera. We are looking at an electronic application that can 1) Count the number of customers who spent more than 5min on a seat 2) Detect from the camera images the number of customers who had the service during the day 3) Notify the store owner if any discrep...
Category: Other - Engineering &...       

l****che
 [?]
Sign in to view client's details.
| l****che
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 8h, 47m ago  |  Ends: 6d, 15h  |   4 Proposals
Making a comparison between fresh aggregate and aggregate that made from recycled aggregate using sima pro or excel with equations and calculations of emissions that produced from those two aggregates
Category: Civil & Structural       
Skills: Microsoft Excel, Civil Engineering, BASINS       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: $80 - $100   |  Posted: 19h, 28m ago  |  Ends: 6d, 4h  |   3 Proposals
My Research topic is:Two dimensional modelling of sand production, using Finite volume to solve the governing equation and then use C++ to program.A C++ Visual code would be used to solve a 2Dimensional Navier stoke's equation in order to predict the critical drawdown pressure. I have been able to obtain the governing equation and discretise using finite volume.I have been given a C++ Visual code of 2D Full Navier stokes equation comprising of the Energy equation,Momentum and Pressure Equation which i have to solve for a flow in a pipe and obtain the Temperature,U and V velocity, temperature distribution and then the pressure distribution in the pipe. I wish to check the functionality of the code by making it obtain the required result with the various boundary conditions imposed(Top and Bottom -Insulated, Left-Dirichlet, Right-Convective).After solving the Navier stoke's equation for the above problem , i would also need to incorporate the code to determine the critical drawdown press...
Category: Mechanical       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Middle East & Central Asia, Central & South America

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: Not Sure   |  Posted: 21h, 43m ago  |  Ends: 2d, 2h  |   2 Proposals
I have 4 Concurrency Systems Problems: serialisability I need someone expert to solve these questions due: 2 septemer
Category: Other - Engineering &...       

M****009
 [?]
Sign in to view client's details.
| M****009
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: 23h, 52m ago  |  Ends: 14d, 0h  |   7 Proposals
We are constructing a 10,000 Capacity Amphitheater. IT will be a Stage amphitheater with a Grass Rised amphitheater No seats...Just grass--With a 10 Ft retaining wall. I will have an autocad of the venue and specs of the Stage, Grounds from General Contractor. I want you to provide 3D 360 degree renderings of the venue with both crowds as if music concert was in place as well as renderings empty. I would like to have Music Venue experience or past experience. Provide samples of Music related portfolio. Also want to have 3D video of flythru as well included. Need done 1 week from Job Acceptance.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

S****CFF
 [?]
Sign in to view client's details.
| S****CFF
|    United States
Fixed Price: Not Sure   |  Posted: Aug 29, 2015  |  Ends: 13d, 22h  |   5 Proposals
We are implemeting CAD Standards in our studio. We currently have AutoCAD LT, and need to streamline toggling layer states for working on our architectural plans. In my previous firm, we had a full AutoCAD license, and had a Macro/ Lisp custom toolbar ribbon that we loaded for customization. My understanding is that this is not possible with the LT version and am researching what the best alternative is. We currently create Layer States for individual projects which is time consuming and inefficient in a growing studio and are open to any proposed solution similar to a custom ribbon. We can provide a spreadsheet and a CAD drawing that identifies all layers. The spreadsheet will also identify which layers should be turned on or off depending on which plan we would be working on. We would also need to lock all off layers in order to enforce standards. We will need to have separate layer states for the following plans. - Construction Plan - Reflected Ceiling Plan - Electrical Plan - ...
Category: CAD       
Skills: AutoCAD       

m****dsi
 [?]
Sign in to view client's details.
| m****dsi
|    United States
Fixed Price: $100 - $300   |  Posted: Aug 29, 2015  |  Ends: 13d, 10h  |   1 Proposal
Parametric analysis of Solidworks flow simulation are to be carried-out using flow simulation API, the main idea is to edit already generated codes in VB 6.0 into VB.net or C++ (prefeably C++) , a plugin in terms of fluid codes (using codes already generated in C++ for navier-stokes momentum equation) should be embedded into the solidworks flow simulation environment), the VB 6 codes are able to do the following: 1. Change different impeller types used for the study 2. vary fluid height in the mixing vessel 3. Varying impeller rotational speed 4. Vary impeller distance from the bottom of the mixing vessel The plugin codes are written in C++, and its untended to be introduced into the mixing vessel as an external fluid and different results ar intended to be generated from the simulation that would determine which impeller gives better homogeneity and at what impeller distance this should be achieved. My system config and software : Win 8, 64 bit, solidworks 2015 and MS visual st...
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo *
|    Nigeria
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 13d, 3h  |   5 Proposals
Looking for a Solar Website. About 5 tabs in total. All of the information will be given to you. I also need a professional submital form on the website so customers can ask for quotes or as questions. Please see my existing website for an idea. It's not great at all but I want it to be simple yet appealing. SEO would be great too.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****zak
 [?]
Sign in to view client's details.
| a****zak *
|    United States
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 13d, 0h  |   8 Proposals
we are developing a Fan for the use in the entertainment industry. We need a fan controller that will do the following Very quiet must be a VFD design 100v - 240 v input 120v output motor PSC 1/4 hp to 1 hp Control by pot and DMX 512 pro Small size durable inexpensive to fabricate
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134 *
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Aug 28, 2015  |  Ends: 12d, 22h  |   7 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: $100 - $250   |  Posted: Aug 28, 2015  |  Ends: 4d, 19h  |   3 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit ±0.5-45mm (or ±50 - ±4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Limit conditions: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run. Requirement: have to use A-B RSLogix 500 software to make the sample program.
Category: Product Design       
Skills: PLC & SCADA, RSLogix 500       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 19h  |   23 Proposals
Hello, I have the 3D model and DWG file of a building I need to be rendered fast and with high quality. Thank you
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       
Preferred Location: United States

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 19h  |   8 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 19h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31/08/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 19h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Aug 28, 2015  |  Ends: 17h, 18m  |   11 Proposals
i am looking for someone with residential construction knowledge to produce a set of construction drawings for a brand new porch and interior renovation work for a small residential house in revit. i am looking to start this today and have drawings turned around by mon/tues of next week
Category: Architecture       
Preferred Location: United States

j****han
 [?]
Sign in to view client's details.
| j****han
|    United States
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 12d, 14h  |   11 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 15d, 3h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 12d, 7h  |   15 Proposals
We are looking for a quantity surveyor with advance estimating skills and experience that can perform detailed drywall & framing, and plastering & EIFS foam quantity takeoffs and estimates for high-rise buildings and commercial developments. We are looking for someone that is well organized, can communicate effectively, willing to review work performed, and that can send us some samples of his work, that is, previous quantities takeoffs to determine your level of experience. Our work assignments are on a project per project basis, fixed price that we can agree for each job upon review. We have the following projects available and need several good quantity surveyors that can assist us with all the projects that we have ongoing. Please find first project: Palazzo Dellaluna - Plans & Spec's (Click Link Below)   [obscured]  /s/4s0h9zzmdgwdzmu/PDL_ARCHITECTURE%20%281%29.pdf?dl=0
Category: Civil & Structural       

G****ing
 [?]
Sign in to view client's details.
| G****ing
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 27, 2015  |  Ends: 12d, 2h  |   17 Proposals
Can you perform drainage plan both engineering and drafting for residentail and commercial projects in TExas? I will provide site plan and topo. I'll send cad files for a specific quote
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: Aug 27, 2015  |  Ends: 27d, 1h  |   16 Proposals
We need someone, or a group of people to put together a product by hand. These need to be mass produced a few times a year.
Category: Other - Engineering &...       
Preferred Location: United States

V****orp
 [?]
Sign in to view client's details.
| V****orp
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 12d, 0h  |   12 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Aug 27, 2015  |  Ends: 11d, 23h  |   14 Proposals
A chemical coated yarn called black wick is to be wrapped with 10 mm width 18" white tissue. We need to design a mechanism that grips the black wick at both the ends, moves the tissue at 10 degree and grips it, twirls it, and grips the other end also. Attached video shows the manual process.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job