Save this Search
     

All JobsEngineering & ManufacturingFixed Price

 (34,614 results)  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 2h, 24m ago  |  Ends: 14d, 21h  |   1 Proposal
We need a simulation with appropriate LED Replacement for conventional 250W HPSV Lights (presently installed) in the proposed plan.   [obscured]  /pyOur0S9mx (download link) . Please also see attached documents. For the purpose of providing solution in LED there are a few points that needs to be checked as follows: 1. The Illumination on the Edge of the plot should be 20Lux Minimum. (as asked by client BUT i feel 25lux should be considered as safe limit) 2. The Illumination on the Taxi Way (Z16/Z17) of the plot should be 5Lux Minimum. (as asked by client BUT i feel 10lux should be considered as safe limit) 3. The pole as of now is single arm and 10meter height, we need dual arm (client tells us the arm can be replaced) and can be incorporated with LED Street Light or Flood Light depending on the coverage. The height of the pole can also be increased upto 18meter if needed for achieving the desired lux level. (although it is prefered to use existing pole to reduce costs, increase of pol...
Category: Other - Engineering &...       
Skills: Dialux       

a****imi
 [?]
Sign in to view client's details.
| a****imi
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 2h, 52m ago  |  Ends: 14d, 21h  |   1 Proposal
i need Freelancer with good Skille in embedded Systems, java small and Academic Writing too. Please contact me for more details. Regards
Category: Electrical       
Skills: Electrical Engineering, Java, Electronics       

d****000
 [?]
Sign in to view client's details.
| d****000
|    Germany
Fixed Price: Not Sure   |  Posted: 3h, 7m ago  |  Ends: 14d, 20h  |   4 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Fixed Price: $150 - $400   |  Posted: 4h, 21m ago  |  Ends: 14d, 19h  |   6 Proposals
Looking for quality practicing M&E engr who fulfils requirements below: -possess minimum qualifications of degree in M& E Engr -possess practical experience in building plans and solutions Task involves analysing CAD engineering drawings and offering solutions to problems + preparing report If you fulfil requirements above, please send (a) samples of work done for previous clients (b) resume/ qualifications/practical work experience
Category: Mechanical       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Fixed Price: $100 - $200   |  Posted: 8h, 11m ago  |  Ends: 14d, 15h  |   5 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 10h, 17m ago  |  Ends: 14d, 13h  |   1 Proposal
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 11h, 51m ago  |  Ends: 14d, 12h  |   1 Proposal
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 59m ago  |  Ends: 14d, 12h  |   3 Proposals
I am looking for a person to get me a few quotes on a custom made metal piece that I use in my manufacturing. The metal piece will need a quote that includes shipping to Kansas City
Category: Contract Manufacturing       

M****les
 [?]
Sign in to view client's details.
| M****les
|    United States
Fixed Price: $500 - $1,000   |  Posted: 14h, 21m ago  |  Ends: 14d, 9h  |   5 Proposals
A large scale CFD (Computational Fluid Dynamics) model is needed to set-up coupled multiphase modeling and 6DOF with dynamics moving meshing. Only expert (Ansys) applies for this. Thank you.
Category: 3D Modelling       

v****cfd
 [?]
Sign in to view client's details.
| v****cfd
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 19m ago  |  Ends: 2d, 8h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: About $20   |  Posted: 16h, 38m ago  |  Closed  |   12 Proposals
I require someone with experience in converting images into a dxf file ready to laser cut. I will be using these on a bystronic laser. This will be a regular thing as im currently working on a few different projects & will require alot of images converting.. The images must be converted to a very high standard so that i can use the dxf file straight away without having to make adjustments to the file.
Category: CAD       

c****rds
 [?]
Sign in to view client's details.
| c****rds
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 16h, 39m ago  |  Ends: 2d, 7h  |   22 Proposals
We have done the floor plans in autocad and now we need to do the interior architectural elevation drawings for each of the 3 floors. I have the Autocad file for you to referance. We need this project done professionally and quickly. please let me know if your interested in this project as we need to start asap.
Category: CAD       
Skills: Drafting       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $25 - $75   |  Posted: 17h, 13m ago  |  Ends: 14d, 6h  |   3 Proposals
i need shoe patent drawing for shoe i have 3ds max model and i can share the drawings must be consistent with the USPTO standard please share some sample of previous work
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 17h, 23m ago  |  Ends: 14d, 6h  |   7 Proposals
I'll need someone who create a piece of software for me (including GUI). It won't be very complicated, it will required: -reading some data from an excel file -doing some basic calculations with that data (converting some times from minutes to second, doing average, etc) -Once that is done you'll have to do a number of iterations applying some special features (coeficients in each iteration, "if", etc) My budget is very limited for this one, approx $100 With regards to the time frame, I'm not in a hurry, so...let's say 2 weeks ? (hope this help to reduce the price) I will provide more details upon request. Cheers
Category: Mechanical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 17h, 41m ago  |  Ends: 14d, 6h  |   21 Proposals
Hub less Bicycle concept drafted from my drawing to exact measurements, file must be fit to take to fabrication for a working model need finished in five days
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****ozi
 [?]
Sign in to view client's details.
| K****ozi
|    United States
Fixed Price: Not Sure   |  Posted: 18h, 39m ago  |  Ends: 14d, 5h  |   15 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 4m ago  |  Ends: 14d, 4h  |   8 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 37m ago  |  Ends: 14d, 4h  |   9 Proposals
Run FEA on linkage castings as described by our engineer. Produce reports as requested by our engineer. Part files and description of FEA parameters will be provided. Please fill out and sign the attached nondisclosure agreement so that we can post the files and have you quote the job.
Category: Mechanical       
Skills: Finite Element Analysis       

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Fixed Price: About $20   |  Posted: 19h, 38m ago  |  Ends: 14d, 4h  |   9 Proposals
I have got a floor plan from architect and want to convert the same into 3D. Total area of the plan is 58sq meter with two room, toilet, kitchen and stairs. Those who are expert in this can apply. You must be an architect. I will upload the PDFs of plan tomorrow. Regards
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

Y****pta
 [?]
Sign in to view client's details.
| Y****pta
|    India
Fixed Price: $500 - $800   |  Posted: 22h, 4m ago  |  Closed  |   0 Proposals
We are searching for a professional 3d designer to perform some 3d modelings and designs ( High reviews and previous work is important ) Info And requirements for this Job :   [obscured]  /wp-contents/Info.rar
Category: 3D Modelling       
Skills: 3D       

p****ual
 [?]
Sign in to view client's details.
| p****ual *
|    India
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 22h  |   12 Proposals
I have qty4 picking system racks that will need to be designed complete with drawings and part lists. I would need these designs complete in 1 week after awarded the job. I would prefer the designs be constructed with Solidworks. Attached are detailed specifications on each application. I also can provide pictures of existing applications once awarded the job. I must stress that i must have all designs completed in 1 week once awarded.
Category: 3D Modelling       

B****W32
 [?]
Sign in to view client's details.
| B****W32
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 22h  |   0 Proposals
In the attached papers in ELISA, synthesized peptide or selected pool from library DNAs used. I want flowchart how library DNAs applied and used in ELISA. I am unwilling to use synthesized peptide.
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 13d, 20h  |   17 Proposals
6 rooms Interior design 1 shot per room Mood images will be provided through houzz.com It's a private villa home with a modern look I am an architect so your job will be easy
Category: Interior Design       
Skills: 3ds Max, Architecture, Interior Design       

H****zzi
 [?]
Sign in to view client's details.
| H****zzi
|    Saudi Arabia
Fixed Price: $20 - $40   |  Posted: Sep 02, 2015  |  Closed  |   6 Proposals
need a highly experienced high quality 3d renderer to do front elevatins of homes to look like as real as possible,they will start with a small job to start with to check the quality of work, then to complete ongoing projects for us, the applicant needs to have architectual experience ad current drawings to show, and must have skype
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

r****nrg
 [?]
Sign in to view client's details.
| r****nrg
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job