Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Not Sure   |  Posted: 33 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need a single panel gate similar to the one in the attached image. Size is about 6ft x 4ft. The frame is 2" square aluminum and the infill panel is cut from 1/4" thick aluminum. The finish is a baked on powder coat over an epoxy primer. The finished product will be delivered to Toronto. Please mention if you are able to also install it.
Category: Mechanical       

t****ith
 [?]
Sign in to view client's details.
| t****ith
|    Canada
Fixed Price: Not Sure   |  Posted: 55 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need someone to design and make an exterior wall vent mask for a kitchen hood. The opening is about 13" x 6". I'm looking for a Voronoi design. Machined aluminum or 3d printed. Silver or black.
Category: Mechanical       

t****ith
 [?]
Sign in to view client's details.
| t****ith
|    Canada
Fixed Price: Less than $500   |  Posted: 1h, 7m ago  |  Ends: 14d, 22h  |   1 Proposal
We're looking for an electrical engineer to design a component that will be integrated into clothing. This product has never been invented before and I would like to see your portfolio. Once I see the portfolio, then we can discuss the product. Please submit your portfolios.
Category: Electrical       

a****inc
 [?]
Sign in to view client's details.
| a****inc
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 34m ago  |  Ends: 14d, 21h  |   2 Proposals
Automatic Needle Threader that also ties a knot. It will be large enough to hold a spool of thread. Needle is laid in slot on top of machine then the "thread" button is pushed and your needle is AUTOMATICALLY THREADED AND KNOTTED.
Category: Other - Engineering &...       
Preferred Location: United States

f****roe
 [?]
Sign in to view client's details.
| f****roe
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 38m ago  |  Ends: 6d, 21h  |   5 Proposals
I need you to make a 3d CAD file (igs) for a part that will be manufactured by injection plastic The part is not very complicated, it will be similar to the piece on the attached picture. It is about 35x20cm I need someone that has already made parts to be manufactured injected plastic so he knows the rules that need to be applied to the part in order to make it manufacturable and keep the mold cost reasonable.
Category: CAD       
Skills: Mechanical Design, Manufacturing, 3D Design, CAD       

E****aii
 [?]
Sign in to view client's details.
| E****aii
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 41m ago  |  Ends: 14d, 21h  |   7 Proposals
I need an interior designer a to do a working drawing of a bed room which i will provid the picture and the plan in autocade. i need to have sections of this bed room showing the bed frame and later on we can agree on the other sections.
Category: Interior Design       
Skills: 3D Modeling, AutoCAD, Interior Design       

a****deh
 [?]
Sign in to view client's details.
| a****deh
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 2h, 50m ago  |  Ends: 14d, 21h  |   0 Proposals
Hello, I am looking for someone to design 2 minimalist wallets. I would like them to be simple but chic. Simple is better. I would like them to have 3 card holders and a sleeve for cash. I would like them done in a computer aided design program such as AutoCAD.
Category: Product Design       

n****y27
 [?]
Sign in to view client's details.
| n****y27
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 30m ago  |  Ends: 14d, 20h  |   2 Proposals
We are looking for a person that we can have sent a Pdf file w floor plans or blue prints. Cad files. And then use our lights w dialux evo and then send us a light layout and photo metrix that we can show our customers. With a 24 hour turn around time.
Category: Other - Engineering &...       

M****lbs
 [?]
Sign in to view client's details.
| M****lbs
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 33m ago  |  Ends: 14d, 20h  |   1 Proposal
I have 14 load cells that I want to read through a National Instruments 9205 analog input module. I need a circuit with a low-pass filter and amplification to a level readable by the NI module. I've tried to build a circuit myself, but am having all kinds of troubles. I've started with an RC low-pass filter which feeds an op-amp to boost the signal to within the common mode range of an in-amp. Here's what I'm working with: * Single supply voltage source, 9 V, provides power to the op-amp and the in-amp and also excites the load cell * Load cell (4-wire, full-bridge) that generates up to 27 mV [3 mV/V excitation] when fully loaded (2500 lbs). So, if I lean on the load cell with 100 lbs, I expect the load cell to put out just 1.08 mV. * Simple R-C low-pass filter. * LM358 op-amp with a common mode input including ground (necessary due to the low voltage output of the load cell under light loading). I'm running this as a non-inverting op-amp. * INA131 in-amp with built-in gain of 100. ...
Category: Electrical       
Preferred Location: United States

j****orn
 [?]
Sign in to view client's details.
| j****orn
|    United States
Fixed Price: $100 - $1,000   |  Posted: 4h, 39m ago  |  Ends: 2d, 19h  |   3 Proposals
This contract is to design all Base Plates, Shear connections and Moment connections for the steelwork on the attached engineers drawings. All required loadings will be provided. Primarily work will be done using the engineers drawings but a Tekla or IFC 3D stick model for the building can be provided a few days after we have started. Designs are to be to UK standards and codes. Shear connections to be based on 'The Green Book' Standard UK plate and cleat sizes must be used (a sample list of these sizes will be provided) A summary of the Designs and Reference plans must be provided and produced on our drawing borders. All supporting calculation sheets (computer outputs) for the base plate and moment connection designs must be provided. The contract must be completed in no more than a week. Thank you
Category: Civil & Structural       
Skills: Structural Engineering       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: $100 - $3,000   |  Posted: 4h, 44m ago  |  Ends: 2d, 19h  |   6 Proposals
This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a simple column and beam steel frame for the UK. Please note that none of the 'internal' mezzanine floor steel is to be included Must be detailed in Tekla 18 or 19 Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 6h, 49m ago  |  Ends: 14d, 17h  |   2 Proposals
need a drafts-person to an engineered scaled drawing at at least a 1"=50' larger scale for a use permit in Baltimore County. The drawing must include a street vicinity mat with site indicated, north arrow, scale of drawing, property outline, and dimension in feet, the square footage of the lot, and the current zoning of the property per the 1"=200' scale official zoning map. Also need the dimension footprint of the ground floor area and gross floor area for all floors (2 floors & a basement). Also need to show and label a minimum of 10% of the lot as open space and describe method of calculation.
Category: Other - Engineering &...       
Preferred Location: United States

m****h56
 [?]
Sign in to view client's details.
| m****h56
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 9m ago  |  Ends: 2d, 15h  |   0 Proposals
12x20 Shed Roof to cover deck that is under construction It will connect to house with ledger board I live in Bristow Va and I need Va stamped engineered drawing for the roof. My footings are dug 26" deep and are 24x24x10(thick) and I have 4 of them. 6x6 post are pinned to the footings and are 10' from house, deck is attached to house with ledger board.
Category: Civil & Structural       
Preferred Location: United States

h****440
 [?]
Sign in to view client's details.
| h****440
|    United States
Fixed Price: $50 or less   |  Posted: 11h, 39m ago  |  Ends: 1d, 12h  |   24 Proposals
I need some small changes made to a drawing for a wire rack, as hand drawn onto drawing attached. The original drawings are 3D, I think they were done on SolidWorks. I can provide an .STP file. The finished drawing to be provided as .STP file as well as 2D and 3D drawings in .PDF format.
Category: CAD       
Skills: 3D, SolidWorks       

M****guy
 [?]
Sign in to view client's details.
| M****guy
|    Australia
Fixed Price: $45 - $75   |  Posted: 12h, 12m ago  |  Ends: 2d, 11h  |   2 Proposals
This project is a part of a bigger project to product a mixed signal IC chip. The digital module will control transistor (MOSFET) switches in an analog circuit. Each switch (from the 8 MOS switches), will transition twice during a clock cycle. So there is T1, T2, T3, T4, T5, T6, T7, T8, in 4 clock cycles. But the duty cycle isn't 50%. So a proposed method of implementation would be to have T1 on the rising edge, and T2 on the falling edge. (2 always blocks can be written or so). The analog circuit has 4 regions of operation, the control signals sent to the MOS switches will change according to the operation region (the operation region is controlled externally). In the design attached (Digital Module 2.png), the FSM controls the select of the MUX. The MUX outputs the control signal to the switch. And the FSM gets its input from LUTs. The LUTs have the switching information depending on the operation region. The paper explaining the entire mixed signal operation is attached. The...
Category: Other - Engineering &...       

R****lan
 [?]
Sign in to view client's details.
| R****lan
|    Egypt
Fixed Price: $1,000 - $5,000   |  Posted: 13h, 2m ago  |  Ends: 14d, 10h  |   9 Proposals
Detailed Scope of Work includes amendments and additions including (detailed brief will be given to candidates) 1. MEP Drawing Amendments On completion the drawings should be of quality to submit to an MEP contractor who will produce detailed routing and quantities. i) Include approx elevation of all fittings in MEP (currently only floor plan) ii) Amend Electrical layout based on Interior Design consultant advice iii) Amend Plumbing drawings based on Interior Design consultant advice Note: Due to framing system plumbing cannot fit in wall cavity so require external channels to be added (must coordinate with client in briefing) iv) Amend HVAC based on Interior Design Consultant Advice Note: Ceiling fans must be bracketed to structure Note: Use of multi split AC units recommended Note: Vents must be incorporated into panel drawings and BM as an item Note: External unit position and box required 2. Architectural Drawings (1:50 and 1:100) These are presented to suppliers/contractors fo...
Category: Architecture       
Skills: Architecture, AutoCAD       

C****bok
 [?]
Sign in to view client's details.
| C****bok
|    Indonesia
Fixed Price: Less than $500   |  Posted: 15h, 41m ago  |  Ends: 14d, 8h  |   26 Proposals
Seeking an experienced manufacturing designer for translating a hand sketch of a new lighter into designs that can initially be prototyped with a 3D printer and later for full manufacturing. Selected freelancer will be required to sign an NDA, after which full details of the project will be shared. Please get in touch with any questions. Thanks
Category: CAD       

j****bob
 [?]
Sign in to view client's details.
| j****bob
|    United States
Fixed Price: Less than $500   |  Posted: 17h, 27m ago  |  Ends: 14d, 6h  |   7 Proposals
I have a ring and pinion gear I would like scanned. I also have a differential housing I need scanned too. The differential is very basic. The total size is 6"diameter.
Category: 3D Modelling       
Skills: 3D Scanning       

a****rth
 [?]
Sign in to view client's details.
| a****rth
|    United States
Fixed Price: $500 - $1,000   |  Posted: 18h, 3m ago  |  Ends: 6d, 5h  |   13 Proposals
I have a project that I am working on that involves a backpack and electrical components. I have the physical design already. I am in need of the design of the electrical components that will be needed to make this work. These are the areas I need you to be knowledgeable in: USB ports Bluetooth Audio (speakers) Visual Displays NDA will be required once you are hired.
Category: Product Design       

J****ika
 [?]
Sign in to view client's details.
| J****ika
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 17m ago  |  Ends: 14d, 5h  |   22 Proposals
We need 3D rendering of the retaining wall and deck we plan to build in our back yard. Here are some details: - Backyard is sleep down of about 8-10' - Survey available - Can provide pictures of existing space if needed - Need to determine ideal position of retaining wall to maximize area and minimize cost. - Picture of deck we like will be provided.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

a****iaz
 [?]
Sign in to view client's details.
| a****iaz
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 20m ago  |  Ends: 1d, 5h  |   52 Proposals
I have a printout of a CAD or Solidworks schematic that I need redone with a few changes. I do not have the original CAD or Solidworks file. It is a fairly simple small plastic part. Thanks.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****omp
 [?]
Sign in to view client's details.
| d****omp
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 52m ago  |  Ends: 14d, 4h  |   7 Proposals
We have the working mechanism and a basic model for a hand held electronics device. We would now like to make to basic tweaks on design and render a 3D design of the device.
Category: 3D Modelling       
Skills: 3D, Electronics, BASIC, 3D Systems       

B****ito
 [?]
Sign in to view client's details.
| B****ito
|    Nepal
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job