Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 11h, 22m ago  |  Ends: 1d, 12h  |   4 Proposals
Create a circuit this is capable of doing division between two 5 bit unsigned integer numbers. Remember that given a fraction A/B, A is called the dividend and B is called the divisor. The result of the division is called the quotient. Your division circuit should be implemented using sequential logic and should complete the division within 6 clock cycles of receiving its input. Cant use only combinational logic I have the the testing circuit, implementation circuit and input circuit . need the division circuit to be completed and working with said circuit. must be done on logisim(  [obscured]  /logisim/) This has to be done within 24hr
Category: Other - Engineering &...       

t****ang
 [?]
Sign in to view client's details.
| t****ang
|    United States
Fixed Price: About $20   |  Posted: 15h, 34m ago  |  Ends: 1d, 8h  |   11 Proposals
This job is a test helping me finding a creative Elancer for the rest of this and many future projects. Im looking for creative solutions for 2-apartment building. The job is to deliver at least 2 rough sketches of alternative floorplan solutions for each floor. This house was originally designed for my family to live in. We have now decided that it is better for us to build it as 2 apartments to and sell them . So the idea is to make the apartments attractive to many potential buyers offering most value at the least cost.. The apartments should be suitable for familes with 2 children but a plus could be possibility to remove a wall to have larger social area instead of a bedrom. Approach: Keep the exterior outline but treat interior as a blank slate to get creative. There will be no inside stair. There is nice scenery to NE so good to put living room there. Terrain: As shown in elevations the the 1st floor is souterrain. Plans were to refill agains the SE wall. Now i think it...
Category: Architecture       
Skills: Architecture       

k****thh
 [?]
Sign in to view client's details.
| k****thh
|    Sweden
Fixed Price: Not Sure   |  Posted: Mar 01, 2015  |  Ends: 1d, 16h  |   32 Proposals
---- What i need done? ---- We have a 2 and a half story building that needs to be designed to utilize the space and get as many apartments as possible with various sizes. We will give you the house plans with current idea and idea of what needs to be done. Your job will be to deliver handdrawn or autocad floor plans for the 2 and a half story building. ---- When? ---- I need this done within 3-5 days after hiring. ---- Details? ---- I will provide accurate measurement details to the chosen provider. I will provide the details in meters and drawn sketch with accurate measurements. ---- Revisions? ---- I need 2 revisions to make it look the way we need. REQUIREMENTS: - Educated architect - Provide sample files of buildings/houses you have created from scratch. - Once this project finishes we will need detailed floor plans and 2d image of the building from 4 sides.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 2D Design       

a****gic
 [?]
Sign in to view client's details.
| a****gic
|    United States
Fixed Price: $500 - $1,000   |  Posted: Feb 26, 2015  |  Ends: 2d, 17h  |   12 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 1d, 14h  |   6 Proposals
Create Infrastructure Architecture for US based Dental and Medical Offices. Experience in similar projects. Looking for innovative design with modern aesthetics, theme based operatories, consulting rooms for doctors to see patients in a pleasing ambiance. We can consider candidates with new ideas and innovation after evaluation of their credentials in design and architecture of modern work spaces.The delivery items should include all trade drawings for general contractor crew to execute the job per US standards. Non US licensed architects also can quote, in such case one of our existing architect will assist on US compliance requirements.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America, India/Southern Asia

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Fixed Price: $200 - $600   |  Posted: Feb 24, 2015  |  Ends: 14h, 36m  |   4 Proposals
Working Title: The Power of Material Selection Persona: Design Engineers and Procurement Tone: Technical & Educational Message: This book is for a custom manufacturer and global supply chain management company that has a superior team of engineers who can provide knowledge and tips for selecting the correct raw material for completing a project. Not only can the type of material they are using (aluminum vs. steel, a steel alloy vs. a steel alloy) affect a project, but so can the form and its properties. This eBook will provide a brief overview of these factors, as well as provide examples to show the company's exceptional knowledge in providing solutions that made a project the best it could be. Requirements: We need a technical writer with experience writing for custom manufacturers or an engineering background to produce a short 4-5 page eBook on the above content. An outline will be provided before starting. A draft of the book must be ready in one week. Please provide...
Category: Other - Engineering &...       

e****-th
 [?]
Sign in to view client's details.
| e****-th
|    United States
Fixed Price: $125 - $175   |  Posted: Feb 19, 2015  |  Ends: 13h, 35m  |   8 Proposals
Create a Tekla model of the concrete form work and metal balustrade stairs. Overall stairs and balustrade dimensions to be to take from the drawing 'Stair core'. The model is to incorporate the formwork stair units similar to the attached Sketchup model 'stair formwork' but adjusting only the riser heights to suit those in the drawing. The model should be of a quality such that fabrication drawings for the individual components for the stair formwork units can be taken of it and a GA similar to the drawing 'Standard GA' can be drawn from it.
Category: Architecture       

A****s_G
 [?]
Sign in to view client's details.
| A****s_G
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Feb 18, 2015  |  Ends: 2d, 20h  |   2 Proposals
We are an architect and construction firm in need of a single project solution for a house currently in construction. We would like to have a series of 15 windows operate by two decision statements 1. Im in sunlight 2. It's more tolerate outside than inside (74 deg). I think this is a simple electronic engineering gig and it's ok if we use off the shelf kits. Motorizations is purchased and 110 v system. If this is in your wheelhouse please contact me. Thanks Cameron Crockett AIA 562.997.zero971. X1 or email Cameronatultra-unit.com
Category: Electrical       

C****ual
 [?]
Sign in to view client's details.
| C****ual
|    United States
Fixed Price: $60 - $500   |  Posted: Feb 18, 2015  |  Ends: 2d, 13h  |   9 Proposals
Description This project will focus on the design of a street light powered by natural resources. The different types of natural resources will be examined and analysed, which includes, solar panels, wind turbine, hydroelectric power, bioenergy and tidal power. This is in order to determine which is the best method of renewable energy to use for the street light as well as due to the geographical location in which the lights will be located which will be the UK. Due to this factor, special attention will be paid to most other resources as there is limited sunshine in most of the UK. Also, the energy capture management will be considered as the energy will have to be stored in order to aid longevity of the lighting and to back up in case there is a problem with the system. The lighting system will also be considered and different existing lightings will be examined and analyzed in order to determine the best and most appropriate system. The structure of the street lights will be design...
Category: Mechanical       

a****awi
 [?]
Sign in to view client's details.
| a****awi
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Feb 18, 2015  |  Ends: 2d, 10h  |   8 Proposals
We are adding a 2nd story deck by removing existing sloping roof and replacing with flat roof. We need plans drawn up and structural analysis done. We need a person / company that can draw up plans and a licensed engineer to stamp plans so we can submit to the county. If you can not draw the plans but can stamp them, we can have someone else draw up the plans, too. Note: You need to be able to stamp plans for Monterey County California. I have plans to the house scanned that can be used as a start for the project. I have attached a simple top view of the change. I can send you the full plans and we can chat about the changes.
Category: Architecture       
Preferred Location: United States

h****erl
 [?]
Sign in to view client's details.
| h****erl
|    United States
Fixed Price: Less than $500   |  Posted: Feb 18, 2015  |  Ends: 2d, 10h  |   42 Proposals
it will be printed by 3d printer in 5-7 cm lines of font need to be more than 0,5 mm high and wide for printing in Lasersinter.
Category: 3D Modelling       
Skills: 3D       

t****moy
 [?]
Sign in to view client's details.
| t****moy
|    Germany
Fixed Price: Less than $500   |  Posted: Feb 18, 2015  |  Ends: 2d, 9h  |   6 Proposals
We are looking for a person with a high level of knowledge in CNC and relevant practical experience to review a 50 questions test. The test contains three types of questions (simple choice, multiple choices, true/false) that are allocated among 3 skill levels (beginner, intermediate, advanced, expert) and organized among several task-based subtopics. The reviewer should go through each question, assess the quality and relevance and eventually give feedback to the author. Thank you for your interest!
Category: Other - Engineering &...       
Skills: Manufacturing, CNC       

o****bal
 [?]
Sign in to view client's details.
| o****bal
|    Canada
Fixed Price: $100 - $275   |  Posted: Feb 18, 2015  |  Ends: 2d, 8h  |   8 Proposals
17 bore hole data provided with following details: - Easting/Northing - Starting depth - Ending depth to classify rock type - Elevation That's it! Software to be used - Geomodeller 2013 (Preferably) If you think you can do it with another software please don't hesitate to bid. :) I will need the work to be done in 4-6 days
Category: Civil & Structural       

P****vi3
 [?]
Sign in to view client's details.
| P****vi3
|    Singapore
Fixed Price: $20 - $1,000   |  Posted: Feb 18, 2015  |  Ends: 2d, 7h  |   19 Proposals
Requires specialist blender for permanent removal work. Work on the project. A lot of work. Objectives: 1. Drawing 3D objects on the plan apartments. 2. Placement the entourage 3. Texturing objects 4. renderer objects Terms and conditions: - Objects to be polygonal low.
Category: 3D Modelling       
Skills: 3D, 3D Modeling       

J****art
 [?]
Sign in to view client's details.
| J****art
|    Russia
Fixed Price: Less than $500   |  Posted: Feb 17, 2015  |  Ends: 2d, 3h  |   16 Proposals
i havent urgent need for help solving the attached problem please. Please see attached pdf for problem description
Category: Chemical Engineering       
Skills: Chemical Engineering       

t****ipo
 [?]
Sign in to view client's details.
| t****ipo
|    United States
Fixed Price: Not Sure   |  Posted: Feb 17, 2015  |  Ends: 2d, 3h  |   1 Proposal
Looking for someone that can build features into wordpress into where users can register and create accounts as well as add payment systems.
Category: Other - Engineering &...       

z****man
 [?]
Sign in to view client's details.
| z****man
|    United States
Fixed Price: $20 - $100   |  Posted: Feb 17, 2015  |  Ends: 1d, 22h  |   8 Proposals
We are looking for a person who could layout a elevated covered walkway plan in a city. Here is the link of the city and some images which might be helpful. This link is the one and the biggest example but the other ones would not be that expensive. Here is the link of the down town of the city of Mississauga.   [obscured]  /#b2ad486faada199904bf4b1d Here are two more attachments.   [obscured]  /#b156fa79e6c7d86a39093368 In the attachment below the thick line is the walkway route. See the map and connect the walkway to the building. You have to give at lease 6 sections of the different locations to give people a good idea. This is for the newspaper so make it like a colorful city plan. Total buildings are 52 but my numbers are haphazard make it in sequence. Note: If the mapquest is not working use   [obscured]  /maps/place/Mississauga+Civic+Centre/@43.58891,-79.643093,15z/data=!4m2!3m1!1s0x0:0x25e72b92256212ce
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

i****iff
 [?]
Sign in to view client's details.
| i****iff
|    Canada
Fixed Price: Less than $500   |  Posted: Feb 17, 2015  |  Ends: 1d, 17h  |   30 Proposals
Hello, I need to have a precision CAD drawing made of a multi-tool, similar to a swiss army knife. The tool will have 14 tools that will fold out. The fold out tools will all be the same shape, but the sizes of each tool will be different. I already have a 2d drawing made in Illustrator, but I'm not very good with CAD. I need to have a CAD model created of my multi-tool? The CAD model must be size accurate and ready for CNC for production, so that the tool can be machined directly from the model. Thanks, Zach
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

z****ign
 [?]
Sign in to view client's details.
| z****ign
|    United States
Fixed Price: Not Sure   |  Posted: Feb 17, 2015  |  Ends: 1d, 15h  |   20 Proposals
We are have recently completed our first power wheelchair prototype using direct drive brushless and gearless motors however during initial testing we have discovered that direct drive is not powerful or safe enough for our needs, and as well as this we are looking at other improvements before we begin our second prototype. What we need now is mechanical engineering expertise to help us with our motor selection and frame redesign. We have already sent off requirements to motor companies and we have a CAD designer who designs our frame but before we start fabricating and buying parts again we are looking for a mechanical engineering expert to check things for us so we get it right this time. Mainly things like torques, loads on motors, loads on the frame, weak points, centre of gravity and balancing. Is this something you might be able to help us with?
Category: Mechanical       
Skills: Mechanical Engineering       

a****102
 [?]
Sign in to view client's details.
| a****102
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Feb 17, 2015  |  Ends: 1d, 13h  |   21 Proposals
Hello. We are interested in hiring you to perform structural steel girts/purlins, attachments to existing structure, and metal roofing and siding detailing. Deliverable will be the following in AutoCAD and PDF format. -General Arrangement Drawings (plan, elevations) -Cross Sections -Details -Structural Fabrication Detail Drawings We will provide CAD drawings and 3D model shots of the structure. Please quote the first structure (ADL Cat Prep). This is a small structure to start, but part of a much larger project. The project consists of 10 structures...some of which are very large. Here are a few 3D files for your review. I will provide a complete set of files and instructions after we award the project. Will you quote a fixed price or hourly rate with a budget?
Category: CAD       
Skills: AutoCAD       

c****urg
 [?]
Sign in to view client's details.
| c****urg
|    United States
Fixed Price: Less than $500   |  Posted: Feb 17, 2015  |  Ends: 1d, 11h  |   1 Proposal
Looking for some one to list and describe Maize flour snacks that my company can produce on low capital. before you bid you need to list the snacks.
Category: Product Design       

M****nge
 [?]
Sign in to view client's details.
| M****nge
|    Tanzania, United Republic Of
Fixed Price: Not Sure   |  Posted: Feb 17, 2015  |  Ends: 1d, 11h  |   26 Proposals
We are a company specialized in Office Partitions, we are looking for 3D professional to make views of our products to present to our customers or include in our website and catalog. We will supply the office layout and sections, the visualizer adds the finishes such as ceilings, flooring, office furniture and misc details. from each office layout 3-4 views would be required from different angles. Close ups would be required and in some cases studio views for some products would be required. final view to be as close as possible to real images. Kindly provide us with an idea of how much will you charge for such a project knowing that several layouts are available and not only one. Awaiting your reply at the soonest. Faris
Category: 3D Modelling       

f****svp
 [?]
Sign in to view client's details.
| f****svp
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Feb 17, 2015  |  Ends: 1d, 11h  |   3 Proposals
First of all I need to know or You can find on existing market or develop a sensor to measure the distance between two objects. When one object close to the other to be less than 15 cm, the first object vibrates and transmits the signal to the smart phone data. The object must be smaller than 5x5 mm.
Category: Other - Engineering &...       

m****nma
 [?]
Sign in to view client's details.
| m****nma
|    Slovenia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job