Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 1d, 12h  |   5 Proposals
Need a seasoned professor or experienced senior geotechnical engineer to write a 50 to 60 page Word(R) file on the following twelve topics: 1- Active earth pressure using Coulomb theory. Should included inclined backfill, wall friction and wall inclination considerations. 2- At Rest earth pressure using Jaky's equation with consideration for OC ratio and inclined backfill. 3- Passive resistance using Coulomb theory. Should included descending slopes, cohesion, slope creep, wall friction and wall inclination considerations. 4- Effect of tiered retaining walls. 5-Effect of adjacent surcharges. 6- Analysis method for ascending backfill slope angle exceeding soil friction angle. 7- Global stability analysis using Spencer method. 8- Analysis & effect of keyway. 9- Effect of stratified or layered soils. 10- Effect of relieving platform. 11- Effect of expansive soils backfill. 12- Effect of seismic earth pressure. I just don't have the time to do it. It will be used for seminars and in...
Category: Civil & Structural       

L****000
 [?]
Sign in to view client's details.
| L****000
|    United States
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 1d, 4h  |   3 Proposals
I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology
Category: Other - Engineering &...       
Skills: Mathematics       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: Not Sure   |  Posted: Jul 25, 2015  |  Ends: 9h, 26m  |   5 Proposals
I am building a new house in Florida, which requires the following engineering: 1. Electrical Engineering (riser diagram and load calcultions) 2. HVAC engineering - Energy Calculation (I already have someone working on the plumbing engineering, but would be willing to have this as part of a package, if it makes sense.) House Description: 1. 3 bedroom, 3 full baths located in both the single-level main living area (1500 square feet) and "casita" in the back (two-story living area of 863 sq. feet). Detached 500 square foot garage. (See attached image). Description of Work: I need for you to design both the required electrical engineering and HVAC engineering to the specifications of Collier County, Florida for building permit submission. For questions regarding exact specifications, please see:   [obscured]  /index.aspx?page=176 Optimally, you would provide the stamped plans. However, I would be willing to accept the plans and have them stamped locally. ...
Category: Electrical       

F****res
 [?]
Sign in to view client's details.
| F****res
|    United States
Fixed Price: $20 - $30   |  Posted: Jul 20, 2015  |  Ends: 2d, 22h  |   16 Proposals
You should produce a set of drawings which replicate the following on CAD: ? Floor Plan ? Elevations ? Section (Long or Short.) Your drawings in CAD will be highly accurate and should be plotted to scale, with appropriate titlebocks and annotation. Please contact only those who can do it in next 3-4 hours. Further information will be provided later.
Category: CAD       

i****810
 [?]
Sign in to view client's details.
| i****810
|    Pakistan
Fixed Price: Less than $500   |  Posted: Jul 20, 2015  |  Ends: 2d, 21h  |   9 Proposals
I need the schematics drawn for me so that I can order some PCB. i need the board to include a 5v lithium ion battery charger which i will be connecting leads to and attaching to a mini usb jack. The board will also need a bluetooth transceiver as well as an amplifier in the 6w-10w range. Either with one channel that is 6-10W or two channels that are 3w-5w each. The board will be used to connect to through bluetooth to a phone or computer and then play music through the speaker connected to the included amp, and all run off of the 3.7v-5v lithium ion battery. I AM ONLY LOOKING FOR THE SCHEMATICS NOT BOARD PRODUCTION. I will use these schematics to submit and order PCB's that are as small as possible and include all desired features.
Category: Electrical       

t****n15
 [?]
Sign in to view client's details.
| t****n15
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 19, 2015  |  Ends: 2d, 17h  |   10 Proposals
to design a control panel for an outdoor, large, complex water fountain. this requires the control of daisy chain installed valves, led lamps, and water pumps.
Category: Other - Engineering &...       

G****RIL
 [?]
Sign in to view client's details.
| G****RIL
|    Mexico
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 17h  |   21 Proposals
Need 3d renderings done of some automotive components. please only bid if you have experience designing/rendering automotive components such as exterior lights. Please provide samples.
Category: 3D Modelling       
Skills: 3D       

s****s50
 [?]
Sign in to view client's details.
| s****s50
|    United States
Fixed Price: Less than $500   |  Posted: Jul 19, 2015  |  Ends: 2d, 14h  |   2 Proposals
Hi People, I would like to obtain a quote to design and produce a 220-240VAC 50Hz to 115V AC 60Hz Pure Sine Wave Converter to suit a 15 watt electric motor. The device needs to withstand a Start current of 7 x FLC and have a duty cycle of 20 minutes on/10 minutes off. The device needs to plug into an Australian Power outlet via a flex lead and be equipped with a US plug to accept a US product plug. I would need the design, initially as a prototype in a test box. The design must then be able to go into production in a compact Moulded Plastic case. The case can be an "Off the Shelf" box if it looks professional. The design will need to meet all Australian and NZ standards including AU/NZ Approvals (RCM Electrical safety Mark, A-Tick, C-Tick, MEPS
Category: Electrical       

H****red
 [?]
Sign in to view client's details.
| H****red
|    Australia
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 13h  |   70 Proposals
Hello, I am looking for someone to create 3D CAD drawings for an item. I have pictures of a very similar existing item that I want to have fabricated, but currently need a model to send to the fabrication company. I want one very small and minute adjustment from the existing item, so you will have the pictures as a guide. The product is portable, basically a pole with a shoe-box size box attached at the top - and I would be more than happy to send you the pictures so you can give an accurate price. Please let me know if you are interested and what your rates are. Thank you!
Category: 3D Modelling       

e****332
 [?]
Sign in to view client's details.
| e****332
|    United States
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 12h  |   11 Proposals
We're looking for a design architect with experience in healthcare design to translate our client brief into a design drawings at 1:50 scale with all associated diagrams, elevations and other information included within the design stage (detailed structural drawings and MEP drawings may be requested later if possible). The project is a charitable primary care (GP) and community maternity care centre offering affordable healthcare to catchment villages in rural areas of South Asia. Experience in green building and sustainable design is welcome. Please see brief for more information.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

A****eco
 [?]
Sign in to view client's details.
| A****eco
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 11h  |   4 Proposals
THE PROBLEM: UL requires us to have a custom cable design for our 42 volt lighting system. The cable needs four 12 AWG wires (not three. We need a fourth lane of power that allows a PCB to detect the microvoltage fluctuations in our device.) The cable must have a custom interface so no existing cables can accidentally be plugged into our system. THE PROJECT: We need to hire an ME or EE with wire harness or cable design experience to create a custom cable (male to male), socket (female only) and adapter (male to male & female to female). The cable will be sold in 10 foot, 20 foot and 30 foot lengths. REQUIREMENTS: - Deliver SolidWorks 2014 files. - Proven expertise with wire harnesses or cable design. - Speak fluent English. Not broken English. Not Google Translated English. True, fluent English skills. - 4.5 star rating or higher with a minimum of 5 completed projects. - Portfolio pieces that convince us you know how to design a cable. We have seasoned mechanical engineers on s...
Category: Electrical       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 11h  |   0 Proposals
I have a control requirement problem and I need it to be corrected. I do not which one is wrong and I attach the picture. Need to be done within before 12 noon PST.
Category: Chemical Engineering       

k****mor
 [?]
Sign in to view client's details.
| k****mor
|    United States
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 11h  |   34 Proposals
Hi, I have my residential home plan (about 2400 sq ft) in autocad format. Need to convert/re-draw to Revit 2016. How much it would take to convert it and what would be timeline to complete it. you can find the attached pdf screenshot to give rough estimate. I would need 3d rendering (walk thro) of the building too. Regards, Anbu
Category: Architecture       
Skills: 3D, Graphic Design, AutoCAD, AutoDesk Revit       

a****hop
 [?]
Sign in to view client's details.
| a****hop
|    United States
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 2d, 10h  |   21 Proposals
New Restaurant salad bar, hot grill entries and small cafe interior concept and design in 3D and autocad Hi all, I need help to design a small healthy fast food - salad bar and grill/hot food bar with small cafe portion attached to it. Cafe portion will only 20% or less, the food serving will be like Chipotle/Qudoba. This concept need a unique look and feel that can generate a healthy food concept, not a posh/costly design. I am looking for less costly cheap design options(thus my starting cost will be less) to make it look gourmet, classy and appealing, not too fancy, but it must convey a """"traditional authentic feel"""" We are looking for a dynamic team of individuals or an individual to produce creative design concepts and interior design. Note:- This is a small startup, so I can't afford costly deisgners.
Category: Interior Design       
Skills: 3D, AutoCAD, Interior Design       

r****001
 [?]
Sign in to view client's details.
| r****001
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 19, 2015  |  Ends: 2d, 8h  |   16 Proposals
Wan to create smartwatch that will feature an analogue face, with a rubber band that has a built in touch screen similar to the sony   [obscured]  /global-en/products/smartwear/smartband-talk-swr30/#tabs the watch will look similar to the casio   [obscured]  -watches.com/us/en/collection/link_with_smartphone/EQB-500/ so that with the rubber band with embedded touch screen will be a simial r concept to   [obscured]  /tbands/tband-awatch/od/msw_chrome/ The power will come from a kinetic source on the watch that will power the smart screen, while he watchg itself will be a battery quartz. Your job woudl be to assist i the design, until it is perfect in 3d photoreal, as well as a assembly breadown of the components so can make a presentation how the watcgh will work and create a presenation a vidio fron the images you supply.
Category: Product Design       

r****mgi
 [?]
Sign in to view client's details.
| r****mgi
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 19, 2015  |  Ends: 2d, 5h  |   10 Proposals
Description: Small US-based firm seeking Electrical Engineer to develop a remote audio control using Bluetooth to pair with smartphones. The device will have limited, defined functions, such as: (1) Button for Play / Pause (1) Button for Next Track & Fast Forward Track (1) Button for Last Track & Rewind Track Electrical Engineer will coordinate with Mechanical Engineer and Project Manager during development to enable the concurrent design of the enclosure / housing for the electronics. In your proposal, please indicate the Design Software to be used for the circuit board design, what (if any) 2D or 3D CAD model file formats the software can generate for use in the housing design, and the name of your favorite local dive. Deliverables: Full documentation and source code for firmware Full documentation for circuit board construction including, - dimensions and mounting points for enclosure / housing - dimensions for buttons / ports / battery locations - power requireme...
Category: Electrical       

j****ork
 [?]
Sign in to view client's details.
| j****ork
|    United States
Fixed Price: Not Sure   |  Posted: Jul 19, 2015  |  Ends: 1d, 19h  |   16 Proposals
I have a programmable infrared TV remote control that that I need to clone the PCB. I'm needing the full schematic, Gerber files and other necessary files to recreate this board. This remote control uses a removable but programmable micro-controller. It's a PIC16F648A that sits inside of a socket (16F648). It contains two Infrared LEDs, a 9A104G resistor, a 10v capacitor, 4.000MHz Crystal and several very tiny resistors on the other side. This remote is powered by 4 AAA batteries. This PCB board is about 2" wide and about 8" long. Also a primer on the circuit and how it works would be great! Also, I have pictures of the PCB that I can provide.
Category: CAD       
Skills: 3D Modeling, AutoCAD, OrCAD       

b****lee
 [?]
Sign in to view client's details.
| b****lee
|    United States
Fixed Price: Not Sure   |  Posted: Jul 18, 2015  |  Ends: 1d, 12h  |   10 Proposals
Hi, I need a design of residential as to the folowing proposal: Salasala Residence Complex Content ? individual villas rooms 3 +1 ? double-villas rooms3 +1 ? three-storey villas rooms3 +1 ? duplex apartments,rooms3 +1 ? apartments rooms3 +1 ? apartments rooms2 +1 ? Apartments rooms1 +1(where necessary for the convenience of awkward available space) Salasala Social Opportunities ? Swimming pool with water slides ? Children's Pool ? Fitness Center ? Table Tennis ? Fitted barbecue ? Basketball court ? Garden with illumination ? Satellite Dish ? Generator ? Parking for cars ? Twenty-four-hour security stall ? The keeper of the territory Office and room Residential Apartment and Villa Features ? Steel front door ? Kitchen, combined with a living room ? Wooden kitchen furniture, granite countertop ? Flooring - marble tiles and ceramic ? The walls are covered with washable Teflon paint ? PVC or Aluminum windows ? TV and telephone cables ? Electrical outlets in all room...
Category: Architecture       
Skills: Architecture, 3D Systems       
Preferred Location: Turkey

m****oma
 [?]
Sign in to view client's details.
| m****oma
|    Tanzania, United Republic Of
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 1d, 12h  |   5 Proposals
We want to develop a proximity fuze for airsoft Mortar launchers and pumpkin Cannons. The Range of the fuze needs to be 80 to 100 meters.
Category: Electrical       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 1d, 7h  |   25 Proposals
Quick & easy job for an Architect to add, resize, delete a few windows from an already fully detailed house plan. Format in DWG (See attached blueprints). Provide quote and start time/turnaround delivery time.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

R****tel
 [?]
Sign in to view client's details.
| R****tel
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 1d, 7h  |   18 Proposals
I am looking to get a rough blue print thrown together for a shipping container home that a client is interested in. The home would consist of six 8x8x20 ft shipping containers stacked like a stair case. The front of the home would be one container lengthwise, than two containers stacked lengthwise, than three containers stacked lengthwise. The entire ground level would be three containers stacked legthwise for a total of about 480 sq ft. The ground level would need to have a kitchen, full bathroom, and a living/dining room. There would be a spireal staircase that leads up to through to the top of the structure. The second floor would be two bedrooms. This floor would be a total of 320 sq ft. I would like the spiral staircase to be right in the middle of the two symetrical bedrooms. Each bedroom would have a sliding door to a small patio that is build on top on the one shipping container that doesnt have any stacked on top of it. Finally the third floor will be the master suite. Th...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

P****ows
 [?]
Sign in to view client's details.
| P****ows
|    United States
Fixed Price: Not Sure   |  Posted: Jul 18, 2015  |  Ends: 1d, 4h  |   1 Proposal
Hi I have a proposal educational project that needs estimating done of the plan etc. I am happy to discuss with the right person further , either thru here or Skype or direct phone. I am looking for applicants only from Australia with previous experience in building industry and qualified estimator. thanks
Category: Other - Engineering &...       

j****990
 [?]
Sign in to view client's details.
| j****990
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 1d, 1h  |   2 Proposals
Hello Elancers! I'm looking for a cardboard envelope sleeve style packaging for my product. The packaging would need to be A5 size, The product is only 3mm thin. I have some artwork ideas which i can finalize once happy with design of packaging and costs. Once happy with prototype would look to order 500+ and more from then on and ongoing. Thanks, Tom
Category: Product Design       

b****oys
 [?]
Sign in to view client's details.
| b****oys
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 23h, 44m  |   14 Proposals
I need a PCB designed that includes a Bluetooth audio transceiver 3.0 or higher, 5v lithium ion battery charger, and dual 5 watt channel watt amp.
Category: Electrical       

t****n15
 [?]
Sign in to view client's details.
| t****n15
|    United States
Fixed Price: Less than $500   |  Posted: Jul 18, 2015  |  Ends: 21h, 45m  |   5 Proposals
Basically needing an encryption module to use a key to encrypt a set of operating messages/API into encrypted messages, then after passing through it, it is decrypted using a key, and used by a secondary processes or devices to execute instructions or messages/data. This is to protect the data from one device, that docks onto another station for data retrieval etc. So basically, encoding messages or information in such a way that only authorized parties (docking stations and perhaps a reader) can read it.
Category: Electrical       

s****708
 [?]
Sign in to view client's details.
| s****708
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job