Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $60 or less   |  Posted: 2h, 23m ago  |  Ends: 6d, 21h  |   5 Proposals
Need small job drafted into autocad as shop drawing for use in building. i have taken measurements of what is required to draft and photos with supporting information you need only input to autocad. structure is small canopy and iron railing.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

a****ura
 [?]
Sign in to view client's details.
| a****ura
|    United States
Fixed Price: Less than $500   |  Posted: 21h, 34m ago  |  Ends: 2d, 2h  |   1 Proposal
Construction estimator needed to determine cost of renovations of a church. Complete plans for bidding and construction are available for use in doing take-offs. Renovations include stripping a flat roof for construction of a 14'x40' choir loft; stairs; LULA elevator; and reconstruction of restrooms for barrier free. Scopes of work are available for the following: Carpentry, Concrete, Demolition, Drywall, Electrical, Elevator, Insulation, Mechanical, Plumbing, Roofing. Detailed take-offs for construction are NOT needed, only assembly (square foot) cost for budget purposes. Material and Labor should be separated for local adjustment or cost shall be on US national average with local/regional adjustments. Estimator shall provide its own estimating software or books for use in preparing estimate. Final estimates should be in 4 categories - 1) Barrier Free Restrooms 2) LULA elevator 3) Choir Loft and stairs 4) Mechanical ductwork. Details of cost determination shall be provi...
Category: Architecture       
Preferred Location: United States

C****Mon
 [?]
Sign in to view client's details.
| C****Mon
|    United States
Fixed Price: $500 - $600   |  Posted: Apr 17, 2014  |  Ends: 13h, 23m  |   4 Proposals
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. I will consider foreign architects only if you have knowledge of IRC and have worked on plans for other US clients in the past. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you. My budget for this job is $600(ID: 557...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: $20 - $50   |  Posted: Apr 16, 2014  |  Ends: 5d, 7h  |   15 Proposals
Hello again. I need some fix ups done on the drawing you did for me a little while back. I noticed a couple small dimension mistakes in drawings and I also need some extra work done on it. I need All drawings on 1 file so the whole layout can be seen in one pdf I need the internal folds to the doors shown I need the doors of LHS and RHS drawn separately with the folds and dimensions etc The quantity of pieces added to eash drawing 1:1 scale added I need flat profiles of eash piece Please let me know what this will cost and when you can do it. I Have put the job up as public viewing but if your price is fair I will just accept your quote. Thanks Norm 1 alteration extra done to only one of the 5 drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

k****orm
 [?]
Sign in to view client's details.
| k****orm
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 5d, 7h  |   8 Proposals
Hello, I'm looking for an mechanical engineer who will help me design a disassembling ring. People will be holding onto it while suspended in the air. Think of gymnastic rings. Please take a look at dimensions and design itself to get a better idea of a product. Here are the requirements for a finished design: 1. ring must support around 400 lb (180 kg) or more. 2. when the ring is fastened together there should be no play/wobble 3. top hoop is inseparable from connectors. so there's only 2 pieces when the ring is disassembled (see gif animation) 4. for delivery - an STL format for rapid prototyping and detailed drawings for manufacturability I'm also fluent in Russian so let me know if it's your preferred language. Thanks for your time. Robert
Category: Product Design       
Preferred Location: Eastern Europe

k****bit
 [?]
Sign in to view client's details.
| k****bit
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 1d, 2h  |   31 Proposals
I require a simple, professional 2D floor plan of my facility. I have attached a draft of (roughly) what I envisage the facility to look like: see 'Floor Plan.doc' To give you an idea of the specifications of each unit I have attached an image: 'Unit Dimensions.jpg'. These are the only dimensions I have but from these you should be able to estimate the required size of the remainder of the facility. - Store room and bathroom only really have to be 2m x 2m - Please add a front double door - Use colour if you wish - Please make any changes / additions you see fit - Let me know if you have any questions
Category: CAD       

B****oli
 [?]
Sign in to view client's details.
| B****oli
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 5d, 0h  |   27 Proposals
Update 1: Thanks for the feedback and questions. First, I've updated the attachments to include the floor plan and photos of the property. Second, I want to add a requirement that the SketchUp design will be used to create photorealistic renderings based on design feedback once we have furniture, paint and wallpaper ideas to test out. Please indicate whether you are able to generate the photorealistic renderings or not. This means the project will have a first milestone of the SketchUp and then a second milestone for the photorealistic renderings based on designer feedback (once my family decides to try a few different design choices). I will need to see how different colors will work with the expected lighting and how different furniture and construction choices will play out. Original Job Description: Attached PDF shows the floor plan for a three story home (first and second floor with a basement). I'd like a 3D rendering of this home so that I can view it in a program on my Mac...
Category: 3D Modelling       

w****aul
 [?]
Sign in to view client's details.
| w****aul
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 20h, 49m  |   24 Proposals
542 entries. Input the names, addresses and telephone numbers into a spreadsheet, either Excel or a Google Sheet (which I will grant access to). Below is a typical data sample. Fields would be last name, first name, street, city, state, zip, tel#, fax#, email address, accreditation. Data Sample: Zumwalt, Robert (914)238-5973 (914)238-6903   [obscured]   47 Spring Lane Chappaqua, NY 10514 Click for map to address AIA Again, 542 of these, looking for a price for the entire project and how quickly you can do it. These items can also be cut and pasted into the spreadsheet. Thanks
Category: Electrical       
Skills: Data Entry, Microsoft Excel, Computer Skills       

u****199
 [?]
Sign in to view client's details.
| u****199
|    Pakistan
Fixed Price: $1,000 - $5,000   |  Posted: Apr 16, 2014  |  Ends: 20h, 15m  |   0 Proposals
I need to install a 75 to 90 foot golf netting to protect a home on the golf course. This will include materials and labor. HOA approval is in the making. The design and materials are being gathered. Need assistance in application.
Category: Product Design       

j****ads
 [?]
Sign in to view client's details.
| j****ads
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 4d, 16h  |   6 Proposals
I have an original clock that i would like to replicate. The inside timing is controlled via a receiver signal (see picture attached). I have the diagrams and everything. It is in german and if need be i can have it translated. Your job would be to replicate the inside workings of the clock. The outside design will be different. How do I contact you to discuss the job Ein Uhrr mit Funk möchtee ich nachbauenn. Anleitung ist dabei. Wir möchten ein Prototyp bauen (also innerlich das gleiche aber anderer Design) Ich werde es Ihnen eventuell schicken. Wie kann ich Ihnen Tagsüber am besten erreichen?
Category: Electrical       
Preferred Location: Western Europe, Eastern Europe

m****ons
 [?]
Sign in to view client's details.
| m****ons
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 4h, 12m  |   0 Proposals
A seamstress is needed to nip, tuck, sew and staple faux leather to 4 long benchlike club seats. Two different coloured leather has to be used. All materials are on site...
Category: Other - Engineering &...       
Skills: Seamstress       
Preferred Location: United Kingdom

w****t01
 [?]
Sign in to view client's details.
| w****t01 *
|    United Kingdom
Fixed Price: $200 - $300   |  Posted: Apr 12, 2014  |  Ends: 1d, 2h  |   11 Proposals
I'm in need of a CAD designer or anyone with experience who can provide a gas piping and electrical plans with load calculations.
Category: Electrical       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: Not Sure   |  Posted: Apr 10, 2014  |  Ends: 6d, 22h  |   24 Proposals
I need someone to work on an existing CAD file and make it more 'marketable' I need the the following layers to be added to the plan (I will just hide the previous version of the below layers). *suite #s added to each room *furniture layout *updated electrical layer (for outlets) *updated phone & internet jack plan **also need the plan 'cleaned up' - remove / black out any non essential items with regards to marketing (i.e. mechanical rooms, building hallways, etc) Once accepted, I will upload a PDF of the above floorplan - with handwritten markups of the above. Floorplan has 50 rooms about 10 x 10 each. Any other suggestions to 'spruce up' the floorplan and make more presentable to potential buyers would be appreciated.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

i****ace
 [?]
Sign in to view client's details.
| i****ace
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 22h  |   6 Proposals
Looking to have a minimum of 100-200 boxer briefs made for a clothing brand. 4 colors with matching elastic bands. Fabric should be cotton x spandex blend Elastic needs to be embroidered with brand name Brand logo embroidered on leg of boxer brief Pocket sewn on brief as well Would like this order to be completed by May 1, if possible. Product will need to be shipped to Pennsylvania. Contact for more details. Thank you.
Category: Product Design       

S****uie
 [?]
Sign in to view client's details.
| S****uie
|    United States
Fixed Price: $350 - $400   |  Posted: Apr 10, 2014  |  Ends: 6d, 21h  |   0 Proposals
I have a card board bailer that weights about 6000 pds that needs to be picked up in New Johnsonville TN and delivered to Abertaville Al TODAY. Need pickup to be by 12 noon today.
Category: Contract Manufacturing       

g****nts
 [?]
Sign in to view client's details.
| g****nts
|    United States
Fixed Price: $350 - $400   |  Posted: Apr 10, 2014  |  Ends: 6d, 20h  |   0 Proposals
I have a card board bailer that weights about 6000 pds that needs to be picked up in New Johnsonville TN and delivered to Abertaville Al TODAY. Need pickup to be by 12 noon today.
Category: Contract Manufacturing       

g****nts
 [?]
Sign in to view client's details.
| g****nts
|    United States
Fixed Price: $20 - $30   |  Posted: Apr 10, 2014  |  Ends: 6d, 20h  |   1 Proposal
I need a Structural Plan, Plumbing Plan, Electrical Plan, Estimation for construction as per architectural plan enclosed, This is a construction of Residential houses in plot of 20*60 North facing plot. 1) Structural Engineering Plan should be provided for G+3 Construction 2) Estimation for Construction should be provided for G+1 Construction estimating to 40,00,000 3) Plans & Estimation should be authorized(Signed and Seal) by Licensed Civil Engineer. Sample Estimation can also be given for our requirement.
Category: Civil & Structural       
Preferred Location: India

c****lli
 [?]
Sign in to view client's details.
| c****lli
|    India
Fixed Price: $3,000 - $10,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 16h  |   6 Proposals
We are looking for a chemist that has significant experience in formulating cosmetics such as creams, serums, lotions and gels. However, what we need the most right now is someone with experience formulating teeth whitening gels. We make hydrogen peroxide and carbamide peroxide teeth whitening gels as non-peroxide teeth whitening gels. If you have experience formulating and manufacturing teeth whitening products, we definitely want to talk to you. We are also formulating some lotions and serums for anti-aging, anti-acne and a few other purposes, but that will come after we have resolved some of the technical issues we have with the peroxide gels. We have sophisticated production equipment and all the lab equipment we could possibly need. We need someone that has experience formulating these kinds of products AND experience in manufacturing them.
Category: Chemical Engineering       

W****Pro
 [?]
Sign in to view client's details.
| W****Pro *
|    United States
Fixed Price: $3,000 - $10,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 16h  |   3 Proposals
We are looking for a chemist that has significant experience in formulating cosmetics such as creams, serums, lotions and gels. However, what we need the most right now is someone with experience formulating teeth whitening gels. We make hydrogen peroxide and carbamide peroxide teeth whitening gels as non-peroxide teeth whitening gels. If you have experience formulating and manufacturing teeth whitening products, we definitely want to talk to you. We are also formulating some lotions and serums for anti-aging, anti-acne and a few other purposes, but that will come after we have resolved some of the technical issues we have with the peroxide gels. We have sophisticated production equipment and all the lab equipment we could possibly need. We need someone that has experience formulating these kinds of products AND experience in manufacturing them.
Category: Chemical Engineering       

W****Pro
 [?]
Sign in to view client's details.
| W****Pro *
|    United States
Fixed Price: $3,000 - $10,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 16h  |   2 Proposals
We are looking for a chemist that has significant experience in formulating cosmetics such as creams, serums, lotions and gels. However, what we need the most right now is someone with experience formulating teeth whitening gels. We make hydrogen peroxide and carbamide peroxide teeth whitening gels as non-peroxide teeth whitening gels. If you have experience formulating and manufacturing teeth whitening products, we definitely want to talk to you. We are also formulating some lotions and serums for anti-aging, anti-acne and a few other purposes, but that will come after we have resolved some of the technical issues we have with the peroxide gels. We have sophisticated production equipment and all the lab equipment we could possibly need. We need someone that has experience formulating these kinds of products AND experience in manufacturing them.
Category: Chemical Engineering       

W****Pro
 [?]
Sign in to view client's details.
| W****Pro *
|    United States
Fixed Price: $3,000 - $10,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 16h  |   1 Proposal
We are looking for a chemist that has significant experience in formulating cosmetics such as creams, serums, lotions and gels. However, what we need the most right now is someone with experience formulating teeth whitening gels. We make hydrogen peroxide and carbamide peroxide teeth whitening gels as non-peroxide teeth whitening gels. If you have experience formulating and manufacturing teeth whitening products, we definitely want to talk to you. We are also formulating some lotions and serums for anti-aging, anti-acne and a few other purposes, but that will come after we have resolved some of the technical issues we have with the peroxide gels. We have sophisticated production equipment and all the lab equipment we could possibly need. We need someone that has experience formulating these kinds of products AND experience in manufacturing them.
Category: Chemical Engineering       

W****Pro
 [?]
Sign in to view client's details.
| W****Pro *
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 16h  |   9 Proposals
we are developing new server and boards to control large systems. We need in this case 5 specialist to be part of our team. 1st designer 2nd electronics engineer 3rd electronics programmer 4th video engineer / specialist 5th network / communication engineer We need people that are flexible with work locations as relocation is possible in this project.
Category: Product Design       

R****wel
 [?]
Sign in to view client's details.
| R****wel
|    Curacao
Fixed Price: Less than $500   |  Posted: Apr 10, 2014  |  Ends: 6d, 15h  |   12 Proposals
Multi use lighter and I need a 3D design of the lighter in order to get a prototype done. Also, if you have a 3D printer and can make a prototype of the product we would be interested in working with you on that.
Category: CAD       

m****lie
 [?]
Sign in to view client's details.
| m****lie
|    United States
Fixed Price: Less than $500   |  Posted: Apr 10, 2014  |  Ends: 6d, 14h  |   5 Proposals
I need to find someone who is really good in t splines If you are interested send me a picture of a project you have made, I have project thats needs 2 weeks of work
Category: 3D Modelling       
Skills: Rhinoceros 3D, t splines       

L****ory
 [?]
Sign in to view client's details.
| L****ory
|    Belgium
Fixed Price: Less than $500   |  Posted: Apr 10, 2014  |  Ends: 6d, 14h  |   3 Proposals
I require structural plan, plumbing plan, electrical plan, estimation for construction to submit for bank. size of the propert is 20*60 feet. plan required for 2 floors. ground: 2 No. of 1 BHK First: 2 No. of 1 BHK and 1 No. of 2 BHK Attached is the plan for the construction. I need signed, sealed from an valid/licensed civil Engineer.
Category: Civil & Structural       
Preferred Location: India

h****lli
 [?]
Sign in to view client's details.
| h****lli
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job