Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Not Sure   |  Posted: 1h, 37m ago  |  Ends: 6d, 22h  |   1 Proposal
Hi I am looking to hire a CFD engineer with experience in managing high and low pressure air flow. One of my biggest challenges is that the pressure needs to be created using low rpms. Before any analysis takes place, I have 4 questions which relate to the project which I am willing to pay someone to answer. If you are happy to sign an NDA, I would love to work with you. I appreciate your knowledge in this area and thank you for your assistance.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

T****ash
 [?]
Sign in to view client's details.
| T****ash
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 2h, 23m ago  |  Ends: 14d, 21h  |   0 Proposals
We have a project for a public entity located in Colorado. It consists of two sculptures. We already know how we are going to fabricate them, and will be putting together our own construction drawings. We will need an engineer to determine if our design meets requirements, make any suggestions needed to fabrication process to meet requirements, and provide Engineering stamp for City Engineer to approve. Stamp must be a Colorado stamp. This needs to be on a contract or not to exceed basis, not an hourly rate. Once we have had a discussion regarding the project, I will provide our drawings to provide an estimate from. Thanks,
Category: Civil & Structural       
Skills: Structural Engineering       
Preferred Location: North America

j****ott
 [?]
Sign in to view client's details.
| j****ott
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 20m ago  |  Ends: 14d, 20h  |   2 Proposals
i need a complete vedio tutorial with examples of how to use STM32 nucleo F411RE with sensor shield to and an open source compiler to build the following: 1- RTOS concepts and overall explanation explained for first time user with small embedded system back ground. 2- Setup, IDE ,library and compilation instruction 3- example: 3 threads for LED with full explanation 4- Example: multi threads for thread1: Buzzer song thread2: two dc motor with encoders that turns 10 turns, then stops, 5 then stops, then keep repeating. 5- Example : thread1: Stepper motors controlled by 2 buttons for up/down direction control (half rotation per press) thread2: 2 servo motors controlled by 2 IR sensors thread3: RTC serial printing current time on terminal. 6- other important examples Important notes: * All vedios should be private and in english. * All documents should be in .doc formal * money will be released after making sure all information given is complete and correct. * i will a...
Category: Electrical       
Skills: Electronics, Embedded Systems, Robotics, RTOS       

K****RDA
 [?]
Sign in to view client's details.
| K****RDA
|    Kuwait
Fixed Price: Not Sure   |  Posted: 3h, 31m ago  |  Ends: 6d, 20h  |   0 Proposals
We are looking for the design and/or procurement of an harness which would be used to support our industrial instrument and allow an operator to support & operate the instrument while freeing both of his hands. The instrument has a touch screen interface, therefore the position on the harness must facilitate its operation. The instrument is of the following dimensions and weight: - Dimensions (W×H×D): 355×288×127 mm (14.0×11.3×5.0 in) - Weight: 6.6 kg (14.5 lb) The harness should be robust and ergonomic for its daily industrial life usage. The harness should be used in the following environmental conditions: - IP rating Designed for IP65 - Operating temperature 0?40 °C (32?104 °F) - Operating humidity 95 %, non-condensing - Compliance ASME, EN 61010-1, CE, WEEE, FCC Part 15B, ICES-003, AS/NZS CISPR 22, RoHS We initially have tested harness designed for camera (see Kinésis Photo Gear H717). The solution is good with our instrument but we are looking for a better adapted sol...
Category: Product Design       

M****yfi
 [?]
Sign in to view client's details.
| M****yfi
|    Canada
Fixed Price: Less than $500   |  Posted: 3h, 57m ago  |  Ends: 14d, 20h  |   1 Proposal
Hello and thank you for looking. I have a parcel of land that I want to build on. It's not too big, about 2 acres but most of it is located in the flood zone and the county is asking me to do a hydro analysis to see the drainage and other issues so we can resolve it. Perhaps a civil engineer who also does hydro analysis? It doesn't have to be like a complex report.
Category: Civil & Structural       
Skills: Civil Engineering       

s****nfa
 [?]
Sign in to view client's details.
| s****nfa
|    United States
Fixed Price: $50 - $100   |  Posted: 4h, 25m ago  |  Ends: 14d, 19h  |   5 Proposals
Make changes to existing model and customize per requirements. We will change the size, move buttons and test until reach perfect model.
Category: 3D Modelling       
Skills: 3D       

I****at1
 [?]
Sign in to view client's details.
| I****at1
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 25m ago  |  Ends: 6d, 19h  |   2 Proposals
I need 1 professional nameplate fabricated from aluminum. Please see attached files. Dimensions are located in the PDF file. Font name is Magneto Bold.
Category: Contract Manufacturing       
Skills: Manufacturing, CNC       
Preferred Location: North America

g****000
 [?]
Sign in to view client's details.
| g****000
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 53m ago  |  Ends: 14d, 19h  |   7 Proposals
I am looking for an individual to develop a conceptual design for a case that will be used to protect an autopilot used on Unmanned Aerial Vehicles (UAVs). Job Responsibilities: -Develop/deliver 1-2 case designs complete with CAD files -Deliver CAD files that are compatible with SolidWorks, Fusion 360, and standard 3D printers -Take into consideration the end user of the product in order to design a case that is both functional and aesthetically appealing -Understand how the product will be manufactured/used and translate that into the design Job Qualifications: -Must have experience with CAD -Must have 3D printing experience -Some knowledge of drones and unmanned aerial systems is desirable -Basic knowledge of standard IP68 wire/pin connections is desirable
Category: CAD       

n****zle
 [?]
Sign in to view client's details.
| n****zle
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 8m ago  |  Ends: 14d, 18h  |   6 Proposals
We work with a few drafters on Elance with success but need to add another to our team. We average 40-60 projects yearly with the bulk of the work June - Oct. We are looking for a reliable person who could continuously create Shop drawings. We usually ask you to give us the first draft within 3 days. For this project we need Areas: Admin Lounge Deco I have attached a PDF "H&M - Long Beach, CA" file as an example of what we are looking for. Regards, Laura
Category: CAD       
Skills: 3D Modeling, AutoCAD       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Fixed Price: Less than $500   |  Posted: 6h, 36m ago  |  Ends: 6d, 17h  |   16 Proposals
Hello, I'm looking for someone to convert my drawings/sketch to a CAD file so it can be read by a water jet machine. Item is a bottle opener. Will need file translated into multiple formats including .pdf, jpg, and .dxf. **** I will only work with designer located in the USA **** Looking for someone to establish a long term business relationship. My other designer is too busy and currently not taking new jobs. Looking for his replacement. I will have more jobs coming up for you as well. Thank you!
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

b****inc
 [?]
Sign in to view client's details.
| b****inc
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 49m ago  |  Ends: 14d, 16h  |   0 Proposals
We are looking for someone to setup and program Engenius ECB350 and the ECB600 Wireless Access Points. We will dropship the units to your location on an as needed basis. you will need to upgrade the software and load the TAR setup program. Then Ship them via USPS Priority Mail to our customer. We pay $10 per unit programmed. Must be located in USA.
Category: Other - Engineering &...       

r****905
 [?]
Sign in to view client's details.
| r****905
|    United States
Fixed Price: $500 - $1,000   |  Posted: 8h, 29m ago  |  Ends: 89d, 15h  |   1 Proposal
The project I invite you to be part of will be the development of the Control / Automation / Mechatronics part of a new RC Helicopter that will be manufactured in Brazil. Besides flying it will perform other functions that must be covered in the system. interested candidates please apply to the job. Thank you
Category: Product Design       
Skills: Electronics, Digital Engineering       

v****tes
 [?]
Sign in to view client's details.
| v****tes
|    Brazil
Fixed Price: Not Sure   |  Posted: 8h, 40m ago  |  Ends: 14d, 15h  |   29 Proposals
I require a preliminary floor plan and 3D rendering for two new studio apartments in an existing building. I will provide the existing overall dimemsions and a preferred layout. Deliverables will be a dimensioned floor plan and a 3D drawing suitable for discussion purposes and preliminary costing only.
Category: Architecture       
Skills: 3D Modeling, 3D Design, 3D Rendering, ACDSee       

r****ler
 [?]
Sign in to view client's details.
| r****ler
|    Canada
Fixed Price: $100 - $3,000   |  Posted: 9h, 6m ago  |  Ends: 2d, 14h  |   4 Proposals
Stanmore Roof This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a curved roof structure for the UK. Must be detailed in Tekla 18 or 19 Candidate MUST have good experience in detailing curves in Tekla Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and produce Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 9h, 41m ago  |  Ends: 14d, 14h  |   1 Proposal
I require a board that interface to the MLX90621. The microcontroller needs to be Cortex M4. Software need to be written to prove the design works and capturing thermal data.
Category: Other - Engineering &...       

g****010
 [?]
Sign in to view client's details.
| g****010
|    New Zealand
Fixed Price: Less than $500   |  Posted: 9h, 48m ago  |  Ends: 14d, 14h  |   4 Proposals
Two boards. I require a board to interface to HopeRF RFM95W. The antenna needs to be small chip antenna. The board needs to be compact. The second board requires is based loosely on the Mediatek Linkit Assist 2502. The board design requires only the processor and the GPS. Both jobs should be easy for someone that has RF experience and board design. Both boards need to be tested to proof that it is working. Both boards need to be designed in Altium.
Category: Electrical       

g****010
 [?]
Sign in to view client's details.
| g****010
|    New Zealand
Fixed Price: Not Sure   |  Posted: 10h, 6m ago  |  Ends: 14d, 13h  |   0 Proposals
Lowongan Kerja PT Freeport Indonesia 2015 Saat ini, tepatnya di tahun 2015, PT.Freeport Indonesia sebagai perusahaan tambang penghasil emas,perak dan tembaga terbesar kedua di Indonesia,sedang membuka lowongan kerja terbaru dengan kualifikasi sbb: Posisi yang dibutuhkan: 1. ACOUNTING 2. ADMINISTRASI 3. FRESH GRADUATE PROGRAM 4. HUMAN RESOUSCES DEPT 5. MANAGER 6. MANAJEMEN 7. MECHANICAL ENGINEERING 8. MINING ENGINEERING Persyaratan: ? Pria/Wanita ? Memiliki pengalaman kerja di bidang yg di pilih minimal 1 tahun ? Pendidikan D1, D2, D3, S1, S2, atau Sederajat ? Mampu mengoperasikan komputer ? Bersedia ditempatkan di wilayah kerja PT. Freeport Indonesia ? Sehat Jasmani & Rohani ? Kelengakapan Berkas lamaran : 1. Surat lamaran dan Daftar Riwayat Hidup. 2. Foto Copy ijazah dan transkrip 3. Fotokopi KTP. 4. Pas fhoto 3x4cm dan No Hp Yang bisa dihubungi. Logo type: Pictorial or Graphic Type
Category: Contract Manufacturing       

f****447
 [?]
Sign in to view client's details.
| f****447
|    Indonesia
Fixed Price: Less than $500   |  Posted: 12h, 34m ago  |  Ends: 1d, 11h  |   8 Proposals
Hey, I need an initial solidworks model of the attached system, so my factory can estimate cost. Further till complete engineering work will follow, at this stage a gross model will suffice. Please let me know if its do able I want technical expert only and he/she should be quick communicator Many thanks!
Category: Mechanical       

a****294
 [?]
Sign in to view client's details.
| a****294
|    Pakistan
Fixed Price: $500 - $1,000   |  Posted: 14h, 19m ago  |  Ends: 14d, 9h  |   13 Proposals
Hi, I am looking for an architect who can provides services to convert a loft space into 2 rooms and a roof terrace. This would involve taking some 2D survey information and providing possible design options using Revit to try and visualize what can actually be achieved. Architect must be experienced enough to give advice on the relevant planning requirements and subsequently be able to complete a set of drawings sufficient to take the project (through planning if necessary) and through through building regs, tender and construction.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 14h, 37m ago  |  Ends: 14d, 9h  |   11 Proposals
We are looking for an MEP engineer who can work with us on a project to project basis for production of detailed MEP drawings. The details to include HVAC and ventilation drawings with heat load calculation Fire Fighting drawings Fire Suppression system details Water supply and drainage drawings Electrical drawings with circuit and Load Distribution schedule Detailed BOQ for contractor Please revert back with your details of charges, time frame required etc.
Category: Mechanical       

h****nid
 [?]
Sign in to view client's details.
| h****nid
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 16h, 6m ago  |  Ends: 14d, 7h  |   2 Proposals
I need someone to design and manufacture T-Shirt Dresses. I will start with a low quantity order to assess demand. I want to have three different designs. I will nee a detailed proposal including the following: Design Cost Item Cost: S/M/L Minimum Quantity Order
Category: Product Design       
Skills: T-Shirt Manufacturing, apparel, sewing       

K****son
 [?]
Sign in to view client's details.
| K****son
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 34m ago  |  Ends: 14d, 7h  |   33 Proposals
Hello we need some pedal karts drawn up in CAD with all the measurements. I have taken some picture's of the karts complete and some in pieces next to a tape. When completed drawing using measurements i gave you i will check them all and then correct if need to. see attached some of the pictures of the parks and measurements. time frame 3-4 weeks for completion
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****n48
 [?]
Sign in to view client's details.
| h****n48
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job