Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: Not Sure   |  Posted: 5h, 56m ago  |  Ends: 6d, 18h  |   3 Proposals
we need a tube design for our lipstick product. freelancer should be familiar with cosmetics industry and be able to create a customized tube for our product. please have a portfolio of previous designs handy. for a better understanding please google the new Christian Louboutin lipstick line. Ideal applicant is someone that is very familiar with fashion design and cosmetics industry.
Category: Product Design       

p****100
 [?]
Sign in to view client's details.
| p****100
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 31m ago  |  Ends: 14d, 11h  |   16 Proposals
The job is to review the PCB layout in ALTIUM designer software. You have to give me a review in the form of word file mentioning all the mistakes you found in the PCB layout according to the schematics. You do not have to correct those mistakes but just to mention and point out those mistakes and any recommendation you want to give in a note pad file or word file. Word file will be better so you can paste snap shot of the PCB layout where the mistake is present. Best Regards Faizan
Category: Electrical       

m****k14
 [?]
Sign in to view client's details.
| m****k14
|    Pakistan
Fixed Price: $500 - $1,000   |  Posted: 14h, 22m ago  |  Ends: 14d, 9h  |   7 Proposals
There are 6 components we need to have calculations for. Each component should have the following information, if applicable: a) Deflection: Dx, Dy, Dz of a "spring" action b) Deflection and rotation: Dx, Dy, Dz, qx, qy, qz, due to Torsion c) Uniform load scenario of 100psf (Refer to Table 4.1 in "Live Loads" of ASCE 7-10) d) Point load of 300lb (Refer to Table 4.1 in "Live Loads" of ASCE 7-10) e) Seismic Load (Refer to Section 13 of ASCE-7-10. "Seismic Design Requirements for Non-structural Components") f) Glass self weight and guard load forces should also be included in the point load, where applicable. The 6 components that need to be checked: 1) HSS Stringer 2) Steel Plate of tread (assume the load is taken all by the steel) 3) Eccentrically loaded tread 4) Reactions at top and bottom connections (need shear and tension) 5) The landing reactions from the steel HSS fra...
Category: Other - Engineering &...       
Skills: Structural Analysis       

A****air
 [?]
Sign in to view client's details.
| A****air
|    Canada
Fixed Price: $50 - $200   |  Posted: 15h, 47m ago  |  Ends: 14d, 8h  |   5 Proposals
Perform simulation using SIMULINK for PID and LQR controller design. Detailed: 1.) Validate and develop simulation model 2.) Evaluate ride comfort performance of active suspension system controlled by PID and LQR Please contact and more details will be provided
Category: Mechanical       
Skills: MATLAB, Simulink, LQR, PID       

v****cfd
 [?]
Sign in to view client's details.
| v****cfd
|    United States
Fixed Price: $500 - $1,000   |  Posted: 21h, 39m ago  |  Ends: 14d, 2h  |   2 Proposals
I am working on a software that required designing and building a new scanner different from the conventional one. Anyone with expertise in Electronics and Java integration would be welcome. Communications and Promptness is very important to me. If you do not have these please do not respond
Category: Other - Engineering &...       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: $500 - $1,500   |  Posted: 22h, 13m ago  |  Ends: 14d, 1h  |   2 Proposals
Hello, Need design schematics with proper rf shielding, interference protection circuitry for 865-867 Band with 200 KHz spread. Module should have a processor and ample memory. Lorawan (  [obscured]  /labs/zurich/ics/lrsc/lmic.html) needs to be emdedded in it. Provision for connecting to RS232 + RS485 Interface You can use sample desgin which are provided by semtech as starting point (  [obscured]  /product-search/en?vendor=0&keywords=SX1276MB1MAS) Power Requirements The offered hardwares should capable of operating on three phase supply drawn from the meter input itself. Auxiliary power supply will not be acceptable. The hardware shall have three phase AC input supply and should be capable of proper functioning within the power supply range of 77 AC P-P to 470V AC P-P, 50 Hz hardware should also be capable of operating on single phase 230V, 50 Hz power supply. The hardware shall be suitably protected against surges. Average Power consumption of th...
Category: Product Design       
Skills: Electronics, RF Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: 23h, 56m ago  |  Ends: 6d, 0h  |   3 Proposals
Fixed Rate: $225 Newbies & Agencies need not apply Description: We own a Solidworks training company and are creating an intermediate Solidworks course. We have already created an essentials of basic machine design course and would like to create the next tutorial. You will help us brainstorm and come up with an idea for the model to make. Please see our beginner course at this link:   [obscured]  /qKuQkG2O8mM Please see what we expect in our intermediate tutorial by reviewing this document:   [obscured]  /open?id=0B0oUc7LaYw8XczB1ZEJFcVQzVzA We would like our course to be broken into "modules" just like our competitors course, please see link:   [obscured]  /watch?v=V-NUisPO7MM&list=PLfP1GxQ1lPaSWOY7biDuGwAnmmQplrREZ Requirements: * Must have Solidworks 2015 * Must be very talented at Soldiworkss * Must have great spoken English (less accent is better) * Must be complete in 3 weeks To prove you've read everything and briefly looked ...
Category: 3D Modelling       

o****ffd
 [?]
Sign in to view client's details.
| o****ffd
|    United States
Fixed Price: About $20   |  Posted: Sep 04, 2015  |  Ends: 13d, 22h  |   1 Proposal
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Less than $500   |  Posted: Sep 04, 2015  |  Ends: 13d, 22h  |   6 Proposals
Looking to get a invention put onto paper with full drawings for construction. egg shape structure which is a bed which can close electronics will be placed inside. will give further infomation on acseptance
Category: Product Design       

b****o_7
 [?]
Sign in to view client's details.
| b****o_7
|    South Africa
Fixed Price: $20 - $60   |  Posted: Sep 04, 2015  |  Ends: 13d, 19h  |   5 Proposals
I have 3 phase 480v electrical into my property, I need to run power out to my site 850 feet away. I'd like to have a 100-200amp service of 1 phase power at the end of the 850ft run. This will be direct burial cable and I would need the EE to look up the Oregon or County specs to make sure the cable selected is suitable. In summary: 1. Size wire according to load and length and 3-phase. 2. Select wire from a discounted source ideally, like ebay 3. Size transformer for 3phase to 1phase 4. Select transformer.
Category: Electrical       

b****s07
 [?]
Sign in to view client's details.
| b****s07
|    United States
Fixed Price: Less than $500   |  Posted: Sep 04, 2015  |  Ends: 13d, 17h  |   5 Proposals
I have some scans that need to be reverse engineered using parametric surfacing. I need to import them in Autodesk Inventor 2015 I need 24-36 hours turnaround for the parts to be ready. I can provide different formats, the scans are made with Artec Scanner. Please send me a message with the price for parametric surfacing and for exact surfacing for each piece. For the record I won`t pay more than 12$-20$ per piece. I repeat please bid between maximum 12-20$ per piece. Example pictures:   [obscured]  /images?q=tbn:ANd9GcQnn82EZfRUPnZ9q1nTiMs5J1lgDma-8bWrBBggBrQcfysq_vYi   [obscured]  /wp-content/uploads/2013/11/85e62ab458da0a58a2e088457c7c44362.jpg   [obscured]  /Media/productImages/Farmer_Brothers_J_D_Beardmore_Classic_Contemporary_CCM1005_door_handle_1.jpg You also have attached a part that needs to be reverse engineered using exact surface reverse engineering,
Category: 3D Modelling       
Skills: Autodesk Inventor       

a****ici
 [?]
Sign in to view client's details.
| a****ici
|    Romania
Fixed Price: Not Sure   |  Posted: Sep 04, 2015  |  Ends: 13d, 14h  |   3 Proposals
we are training company looking for make simulation game for the project management course which we provide but in regular training way.
Category: 3D Modelling       
Skills: Project Management       

a****bea
 [?]
Sign in to view client's details.
| a****bea
|    Egypt
Fixed Price: Less than $500   |  Posted: Sep 04, 2015  |  Ends: 5d, 14h  |   4 Proposals
I want to condenser, at the pressure of 1 atm, a flow rate of 300 kmol/hr of azeotropic vapors with a noncondensable component (azeotrope water-benzene and nitrogen) with phase composition of nitrogen of 1%. using the cool liquid most appropriate. I will send an example later on. I need : -the calculations in mathcad -sketch made in autocad - pdf sketch
Category: Chemical Engineering       
Skills: AutoCAD, Chemical Engineering, MathCAD, chemical       

s****chi
 [?]
Sign in to view client's details.
| s****chi
|    Italy
Fixed Price: About $20   |  Posted: Sep 04, 2015  |  Ends: 13d, 13h  |   3 Proposals
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Less than $500   |  Posted: Sep 04, 2015  |  Ends: 1d, 11h  |   5 Proposals
We are looking for a mathematician or an engineer who would able to solve the following optimization problem. - The wood manufacturing business has X machines. Each of the machines is operated to process wood material during working hours. The number of working hours for each day of production should be an adjustable variable which can be changed by the user. - Every day the management of the business receive a list of jobs that need to be done during the next couple weeks (see attached); - Each job has a corresponding deadline that needs to be met; - Each job consists of X number of processes which correspond to each of the machines. Each process in a job needs to be completely finished before the next one can begin i.e. needs to run in order of Process 1 to Process X; - For each of the processes, there is a certain run time that is provided within the input data; - There should be an interval of 15 minutes between each job for any given machine. The goal is the find the most optima...
Category: Other - Engineering &...       

t****ost
 [?]
Sign in to view client's details.
| t****ost
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 9h  |   14 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the fu...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 7h  |   25 Proposals
I have a ring and pinion gear I would like 3d scanned to cad file or reversed engineered to cad file. The ring size is approx 4" diameter. I need a cad drawing to send to manufacturer to reproduce. I can mail the ring and pinion for you to reverse engineer but would need it mailed back when finished. Thank you.
Category: 3D Modelling       

a****rth
 [?]
Sign in to view client's details.
| a****rth
|    United States
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 7h  |   16 Proposals
Need an architect - designer to design the front fence and front building facade for an existing 1 story structure using eichler- esque design features and elements - horizontal wood -cinder block etc. I only need elevations and isometrics of the front facade..no other views, no plans, no site plans, etc.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

1****sky
 [?]
Sign in to view client's details.
| 1****sky
|    United States
Fixed Price: Less than $500   |  Posted: Sep 03, 2015  |  Ends: 13d, 3h  |   25 Proposals
Hello, We have a client that is looking for us to design a kitchen and we are looking at someone to give us a concept rendering. We can send you some design ideas we are looking for as well as pictures of the space with dimentions etc. We would need this done within a week for our client presentation.
Category: Interior Design       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $25 - $150   |  Posted: Sep 03, 2015  |  Ends: 13d, 3h  |   26 Proposals
We have done a drawing in 3D using Autodesk Inventor and need a realistic rendering done of the kitchen showing the room, kitchen table, etc. We can send you the 3D file to work with and can show you what style we'd like it to like such as the finish, floors etc. I would need this rendering as soon as possible as we are showing this to our client and Monday. Please let me know if you can do this for us.
Category: 3D Modelling       
Skills: 3D, Autodesk Inventor       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: Less than $500   |  Posted: Sep 03, 2015  |  Ends: 13d, 1h  |   21 Proposals
Experienced Toy Designer/3D Modeler needed to convert 2D image into a Designer Vinyl Toy. This 5 - 6" toy will be the template that many character designs will be applied to. Candidates must have previous toy design experience. Advanced 3D modeling skills Project Steps: - Provider signs an NDA - Provider briefed on design requirements - Review 2D design - Convert & improve 2D design to 3D model - Deliver Rapid Prototype ready STL 3D files - Deliver turn around view (front, sides, back, top, bottom) of toy as artist template Please feel free to ask any questions.
Category: 3D Modelling       

P****ide
 [?]
Sign in to view client's details.
| P****ide
|    United States
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 12d, 23h  |   4 Proposals
process plant safety please see the attachment and solve the question as describe and complete the complete requirnment as given in the attached file
Category: Other - Engineering &...       

z****786
 [?]
Sign in to view client's details.
| z****786
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 12d, 22h  |   4 Proposals
we want to bulid a matlab program that connect CC2540 device and read sensor data from it using Bluetooth then do actions deped on the data that sended by the device
Category: Other - Engineering &...       

a****992
 [?]
Sign in to view client's details.
| a****992 *
|    Jordan
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 12d, 22h  |   15 Proposals
I'll need to measure temerature from 12 points through non-contact temperature sensors. Once the temperature is readed, the data has to be saved in a memmory card. Ideally, the sensors will be reading and saving temperature, at least, every 0.5seconds. The idea is that later I can plot temperature vs time. The freelancer will have to prepare a tutorial on how to do this and must cover all the aspects so that someone with little knowledge can buy its own sensors and do it. That includes the code. I hope to hear from you soon. Cheers P.S: I was thinking about this sensors:   [obscured]  /products/9570
Category: Electrical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job