Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $30 or less   |  Posted: 3h, 43m ago  |  Ends: 14d, 20h  |   6 Proposals
I need a Solidworks file containing a 60 sided polyhedron composed of triangles. Attached is a photo. Each triangle is 3.1" X 3.1" X 3.1" If you can successfully create this, I will have much more work for you.
Category: CAD       
Skills: 3D Modeling, SolidWorks       

r****ing
 [?]
Sign in to view client's details.
| r****ing
|    United States
Fixed Price: Not Sure   |  Posted: 4h, 8m ago  |  Ends: 14d, 19h  |   1 Proposal
I am building a house, and need help with electrical service load analysis, electrical wire routing design / circuit design, and part list for job. I have some future items that will need dedicated ciruits for the future Future need dedicated circuit: Port a che ( Covered parking)- 4 lights over the garage -Future bathroom and game room possible central AC unit added to over garage I think a breaker panel in the garage and a panel in the bedroom 4 Closet Trying to get a parts list to figure the cost of material for the job as I have several electricians bidding the job, but some are bidding just labor and I am unable to compare apples to apples. Also I wasnt to make sure the electrician do the right service into the house.
Category: Electrical       

r****005
 [?]
Sign in to view client's details.
| r****005
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 47m ago  |  Ends: 14d, 19h  |   1 Proposal
Looking for someone to make me a 2.1 channel Class D amplifier board with passcode protected bluetooth. The amplifier has to run on 12v 1a and have approximately 2X25 watt fullrange output and 1X50 watt bass output.
Category: Electrical       

k****015
 [?]
Sign in to view client's details.
| k****015
|    Canada
Fixed Price: Less than $500   |  Posted: 5h, 50m ago  |  Ends: 14d, 18h  |   6 Proposals
Very simple steel structure for which I have attached a hand sketch. -consider a roof snow load of 25 pound per square foot -roof dead load of 15 pounds per square foot -ultimate wind velocity 120 miles per hour I need the wind and and snow load for the structure using ASCE 7-10 Also check the capacity of the four columns and four beams if they are made from the following material:   [obscured]  /merchant.cfm?pid=18019&step=4&showunits=inches&id=1270&top_cat=0
Category: Civil & Structural       
Skills: Civil Engineering, Structural Analysis       

j****tay
 [?]
Sign in to view client's details.
| j****tay
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 19m ago  |  Ends: 6d, 16h  |   1 Proposal
Hello! Thank you for considering this job. I am working with a friend to build a coffee stand (espresso stand) from the ground up. What I need is a few of ideas or schematics to work with for several different locations. Two of the locations require thin but long coffee stands. And one location has all the space you can imagine for a free standing espresso stand. I would imagine the stands being anywhere from 12 feet long to 6 feet wide, approximately. Preferably, I need someone who is familiar with doing this type of café/coffee stand design ? and who can help design the space for the stands which would include space for an espresso machine, grinders, storage, refrigerator double-sided windows, etc. I should be able to give the schematics to a contractor who would then be able to build the stand using what I gave them. The stand should be self-contained, plumbed (If water is available), and able to transport on a trailer. Im a total novice at this, so any other advice may ...
Category: Civil & Structural       

v****gns
 [?]
Sign in to view client's details.
| v****gns
|    United States
Fixed Price: $35 - $40   |  Posted: 7h, 53m ago  |  Ends: 14d, 16h  |   6 Proposals
I need AutoCad 3D technician to model the attached file and plot it on the 11 acre plot with a gate house and fence wall. I will need a far and near photos with photo from top of roof. Attached is an AutoCad 2004 file. with all the designs
Category: 3D Modelling       
Skills: AutoCAD, AutoDesk Revit, AutoCAD 2012, Autodesk       
Preferred Location: India/Southern Asia, Eastern Asia

A****eas
 [?]
Sign in to view client's details.
| A****eas
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 9h, 16m ago  |  Ends: 6d, 14h  |   5 Proposals
I am looking for a CAD draughtsman to produce 2D and 3D drawings of a cricket ball. The ball is synthetic and of two-part construction (two identical hemispherical parts) but otherwise retains all the features of a traditional ball (i.e. seam and stitching). I require both 2D and 3D drawings/models as follows: - 2D Drawing (.pdf and .dwg format) detailing all the features with dimensions (and tolerances) and additional specification details such as material type, colour, weight etc. - 3D model (.igs and .step format) of the same part. This is a simple task but, if completed to a high standard, will result in additional work in the future as the product develops. The attached provides an overview, further detail to follow. Please do not apply with a generic cut-and-paste response; I am looking to establish a relationship which will result in further work. Thank you.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Mechanical Design       

D****all
 [?]
Sign in to view client's details.
| D****all
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 9h, 22m ago  |  Ends: 14d, 14h  |   5 Proposals
Apollonian cone, it is a cone which has a circle, ellipse, Parabola & Hyperbola in a single cone. Please find the attachment. I need a model to design it and also a prototype made from wood.
Category: Other - Engineering &...       

s****tta
 [?]
Sign in to view client's details.
| s****tta
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 25m ago  |  Closed  |   12 Proposals
Hello, We need a 3D model for a travel wallet which could be used to prepare high quality marketing images and content from different angles in photoshop. The 3D model will be used in photoshop for post processing to make it look realistic. If you can do both, please mention in your bid that ("3D+Post Processing") or ("3D only") I have attached the 2D image of the model.
Category: 3D Modelling       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Middle East & Central Asia, Central & South America, Australia/Oceania

a****cts
 [?]
Sign in to view client's details.
| a****cts
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 31m ago  |  Closed  |   1 Proposal
I have a part (in .ipt format) that I need to have a mold designed for. I'll be following this tutorial:   [obscured]  /blog/2014/8/19/how-to-create-a-rubber-prototype-using-a-3d-printed-mold Only, I'm not familiar with the tools in Inventor and need the mold design created from the part file. I will probably revise the part file and have new molds to make, so I will probably need this job to be repeated a few times.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, mold design       

p****n_1
 [?]
Sign in to view client's details.
| p****n_1
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 46m ago  |  Ends: 14d, 14h  |   1 Proposal
We already have planning permission granted and structural drawings have been drawn up for a wrap-around kitchen extension. Unfortunately our architect has over committed himself and we will incur a very long delay before he can provide us with final drawings suitable for building regulations approval and the schedule of works. As the design itself is pretty much complete, we are just looking for someone who can provide us with a detailed design with all the relevant information to ensure that the build is compliant with building regulations. Please see attached our drawings that went in for planning, structural drawings and a word document with further basic info on the project including a 2d plan.
Category: Architecture       
Skills: Architecture       
Preferred Location: United Kingdom

g****333
 [?]
Sign in to view client's details.
| g****333
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 9h, 47m ago  |  Ends: 25d, 12h  |   3 Proposals
I am using a CFD program CONVERGE to simulate engine operation. The compression chamber has small leak passages, on the order of 1mm^2, from which the compressed gas leaks during the engine cycle. Modeling these leaks is inefficient due to the small mesh size required, and this slows the simulation computing time dramatically. I would like to hire someone who can modify the CFD code using a "User Defined Function" which will uniformly remove mass from the chamber as a function of time, at a prescribed rate, without physically modeling an orifice to the atmosphere. Please contact me for details.
Category: Mechanical       
Skills: Computational Fluid Dynamics (CFD)       

M****son
 [?]
Sign in to view client's details.
| M****son
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 23m ago  |  Ends: 14d, 11h  |   11 Proposals
I'm looking for some one who can do my cource work which is about dc-dc converter all the details are attached here ,so please let me know if you need any further information. just read Bidirectional DC-DC Converters for Energy Storage Systems and answer all the questions and do the report as well. thanks
Category: Electrical       
Skills: Electrical Engineering       

e****lfa
 [?]
Sign in to view client's details.
| e****lfa
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 13h, 55m ago  |  Ends: 14d, 10h  |   8 Proposals
We need to create a technical design sketch for new 3D printer. Printer's geometry like Makerbot or Ultimaker. Dimensions - resizable. Suggestions for the design: strong and stylish
Category: Product Design       

a****yur
 [?]
Sign in to view client's details.
| a****yur
|    Russia
Fixed Price: Not Sure   |  Posted: 15h, 32m ago  |  Ends: 6d, 8h  |   16 Proposals
greetings, we are putting together a home remodel which will take house from standard to wow. It is an existing house that will undergo large changeover on exterior and interior. Need person with great and long experienced in construction, design, architecture, etc. Helping understand what is doable and/or not. Have all photos, plans, etc and generally know what want. Looking for right person and an understanding of costs for you as well as costs for project. Generally take existing structure, help design it to what end result will be and then either you or another work up construction drawings, etc.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

a****n28
 [?]
Sign in to view client's details.
| a****n28
|    United States
Fixed Price: $500 - $1,000   |  Posted: 17h, 18m ago  |  Ends: 29d, 6h  |   3 Proposals
I'm looking for a mechanical/electrical engineer who can design a cool new USB car charger to be submitted for a utilitiy patent and possibly to Underwriters Labratories. Work will require 2D mechanical and elctronical schematics to be submitted to the U.S. Patent Office and possible future 3D renderings. My job requires a hard estimate before job is finalized. Please no hourly offers!!!!
Category: 3D Modelling       
Preferred Location: United States

s****t27
 [?]
Sign in to view client's details.
| s****t27
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 55m ago  |  Ends: 6d, 5h  |   8 Proposals
Hand drawn sketch of car display ramps ('as built' drawings from previous manufacture). Needs to be modelled & drawn in 3D CAD (ProE Wildfire 5) Drawings will be for future manufacture of parts. Require CAD model & drawing (ProE Wildfire 5), DXF & PDF of drawing. Steel sections to be to Australian standards.
Category: 3D Modelling       
Skills: Pro-E       

n****ign
 [?]
Sign in to view client's details.
| n****ign
|    Australia
Fixed Price: $30 - $50   |  Posted: 21h, 26m ago  |  Ends: 6d, 2h  |   32 Proposals
Looking for high quality drafter experienced and proficient in autoCAD to draw and trace building plan for submission to building authorities. Requirements: -Preferably have minimum qualifications Engr/Science degree -Experienced and familiar with using autoCAD to draft building plans for building plan submissions. -Capable of consistently delivering high quality work on time If work quality is good, there will be regular drafting jobs for the successful candidate
Category: CAD       
Skills: 3D Modeling, AutoCAD, Mechanical Engineering       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Fixed Price: Less than $500   |  Posted: 21h, 40m ago  |  Closed  |   4 Proposals
I'm looking for some one who can do my cource work which is about dc-dc converter all the details are attached here ,so please let me know if you need any further information. just read Bidirectional DC-DC Converters for Energy Storage Systems and answer all the questions and do the report as well. thanks
Category: Electrical       
Skills: Electrical Engineering       

e****lfa
 [?]
Sign in to view client's details.
| e****lfa
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 22h, 31m ago  |  Ends: 29d, 1h  |   8 Proposals
This job is for someone who can make a 3D powder printer (powder bed and inkjet head 3D printer) based on the open source 'Plan B' printer:   [obscured]  /plan-b/ You take care of the entire process, from analyzing the design, sourcing the parts, making the printer and eventually shipping the printer to Belgium. You should have some experience in this field. It's a very hands-on job that requires quite some technical skill. I'd like a few alterations to the original design we can discuss later (in brief, I'd prefer a RVS frame instead of aluminum and an other type of cartridge might be preferable). Feel free to discuss anything about this job with me first.
Category: Other - Engineering &...       

F****s78
 [?]
Sign in to view client's details.
| F****s78
|    Belgium
Fixed Price: Not Sure   |  Posted: 23h, 24m ago  |  Ends: 29d, 0h  |   7 Proposals
I need music made for a video project about Iran. I would like for the music to be a kind of fusion between modern and traditional persian sounds. I am open to creating this "fusion" within any genre or sub genre (dubstep, electronic, acoustic etc.) I will obviously provide examples of the kind of tracks I would want. And I will also provide tracks of traditional persian music/instruments that can be sampled for this project. The video is approximately 10-15 minutes long and I would need music almost the entire duration. I am also open to having mutiple tracks made as opposed to just one very long track.
Category: Other - Engineering &...       

S****Mad
 [?]
Sign in to view client's details.
| S****Mad
|    Malaysia
Fixed Price: Less than $500   |  Posted: 23h, 30m ago  |  Ends: 14d, 0h  |   1 Proposal
We are a gymnastics club that runs a turn up and play session. We currently use an app called 'sign in' and this asks each customer to sign in their name, mobile and email. It also totals up how many people have signed in - therefore who is on site each day. We can also then download this information as a CSV.. Most importantly for our members this app remembers them! As they hate to constantly type in email and mobile number - especially if they are regulars to our gym. As soon as they put their name in - it remembers all of their information! Unfortunately the app is being updated and the makers have said they cannot carry over old information to the new update! I will have very annoyed customers as I have over 1000 details already stored. Other reasons - being I would like a more personalized sign in app to our gym club - that could potentially add more features along the way etc. Most importantly I need our current information to be able to continue as normal in the new a...
Category: Product Design       
Skills: Electronic Design, Product Design       

s****oad
 [?]
Sign in to view client's details.
| s****oad
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: May 03, 2015  |  Ends: 13d, 22h  |   0 Proposals
hello i need a fm transmitter which can send signal to a computer application . for example : if i am 2 km away from my computer and my computer is connected to a fm receiver and i have a fm transmitter through which i can send signals to the fm receiver and my computer will do a predefined action on a particular signal, Like YES on 1 type of signal and NO on other type of signal. we can hire a software developer for software part. the signal must be very fast as need lowest latency in transforming signals... if you can suggest any other device which is very small we can also use that like RF control. we can also use DTMF tones on phones ( but i have checked earlier there is a delay in DTMF tones). our main aim is to send some signals to our computer application which will react on out sent signals...... thanks
Category: Product Design       
Skills: Electrical Engineering, Electronics       

g****993
 [?]
Sign in to view client's details.
| g****993
|    India
Fixed Price: Less than $500   |  Posted: May 03, 2015  |  Ends: 13d, 21h  |   2 Proposals
i need a webpage designed and fully functional. I need examples of drawings and general information about the business. I need photos Shopping cart Equity/ quote page and can upload a drawing Button to call me for enquiry Marketing and advertising to promote page and create z customer database of genuine clients.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, ASME       

u****ter
 [?]
Sign in to view client's details.
| u****ter
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job