Save this Search
     

All JobsEngineering & ManufacturingHourly

 (290 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 40 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
PCB design. Hardware product design. C51 coding. Xmega AVR design and coding. ARM7 product design and coding. ARM9 product design. Linux system design.
Category: Electrical       

s****ong
 [?]
Sign in to view client's details.
| s****ong
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 55 minutes ago  |  Ends: 14d, 22h  |   1 Proposal
Hi, We are a company providing Procurement services located in HK, and for a current proposal we are looking for someone able to design in 3D a retractor (for earphones) on the basis of a simple sketch, and make sure that it is, from an engineering perspective, workable. Plus, for a convenient reason, we are looking for people located in Hong Kong, or mainland China. If we are satisfied, we might go to you for more prototypes. Here enclosed you will find a sketch about what we are looking for. Kindest regards
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

a****psa
 [?]
Sign in to view client's details.
| a****psa
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 33m ago  |  Ends: 14d, 21h  |   0 Proposals
Hi, We are a Procurement Services company located in HK and for a current proposal we are looking for someone able to design in 3D a retractor (for earphones) on the basis of a simple sketch, and make sure that it is, from an engineering perspective, workable. Plus, for a convenient reason, we are looking for people located in Hong Kong, or mainland China. If we are satisfied, we might go to you for more prototypes. Kindest regards
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

a****psa
 [?]
Sign in to view client's details.
| a****psa
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 33m ago  |  Ends: 2d, 22h  |   0 Proposals
Looking for assistance in putting together a permit/construction set for the renovation of a single family home in the Chicago suburbs. Scope of work is all on the interior: basement, first floor and second floor. Must be proficient in AutoCad and be familiar with the International Residential Code with experience in putting together construction documents. A pdf set will be provided for reference showing the level of information expected on the drawings, and for assistance in preparing your bid. Job Duties will include: 1) Edit an existing Title sheet to reflect new project (there will be no zoning/code research - but you will have to do some area calcs). 2) Create Demo plans for 2 floors 3) Floor plans (dimensions and notes for all 3 floors) 4) Elevation sheets - these will be photographs inserted into the drawing and noted, so no actual drafting of elevations, just notes and/or tags. 5) Door schedule, window schedule, light & vent calcs 6) Electrical plans for all 3...
Category: Architecture       
Skills: Architecture, AutoCAD       
Preferred Location: United States

M****713
 [?]
Sign in to view client's details.
| M****713
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 41m ago  |  Ends: 2d, 21h  |   10 Proposals
Architect looking for drafting help Job Description: Looking for a proficient AutoCadd drafter to input hand sketches and drawings (plans and elevations of existing buildings) into the computer (via AutoCadd) - all 2D no 3D work. I have multiple small projects with quick deadlines.
Category: CAD       
Skills: 2D Design       

M****713
 [?]
Sign in to view client's details.
| M****713
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 2h, 41m ago  |  Ends: 14d, 20h  |   1 Proposal
Perform Quantity Surveying / estimating take offs on Construction Issue drawings for commercial Joinery works. Kitchens / Bathrooms etc.
Category: Contract Manufacturing       
Preferred Location: India/Southern Asia, Eastern Asia, Middle East & Central Asia

S****ler
 [?]
Sign in to view client's details.
| S****ler
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 44m ago  |  Ends: 14d, 20h  |   8 Proposals
Hello I would like a scaled layout drawn for a new restaurant. This will be done in two stages. First the initial floor plan and then restaurant equipment will be added at a second point a few days after. Looking for someone that is good with cad etc. Very easy to draw out. I have all the measurements, just need someone to draw it out in a cad program. I can send a pdf of the floor plan roughly sketched up. Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

s****913
 [?]
Sign in to view client's details.
| s****913
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 58m ago  |  Ends: 14d, 20h  |   2 Proposals
I am looking for an automatic folding mechanism to be used in folding samosa pastry sheets into triangles with filling inside, to be compact, fast and reliable, I am looking at two options where filling and pastry can be inserted manually and the mechanism just needs to fold the sheets into triangles or a manual sheet insert with automatic filling and folding mechanism, if you feel you are able to produce this, please get in contact for further information.
Category: Mechanical       

m****iah
 [?]
Sign in to view client's details.
| m****iah
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 10m ago  |  Ends: 19h, 49m  |   6 Proposals
I require nine 3D renderings of roofing tiles. I will provide full instruction upon selection of candidate. I do require this work be completed as soon as possible. ----> I will initially require "proofs" of each model as there will probably be changes from the client. This job does not require anything super complex. I need basic forms and do not require textures or detail work at this stage. Thank you!
Category: 3D Modelling       
Skills: 3D, 3ds Max, AutoCAD, Blender3D, 3D Rendering       

a****gns
 [?]
Sign in to view client's details.
| a****gns
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 4h, 39m ago  |  Ends: 14d, 18h  |   0 Proposals
We are a high tech development company in North America and are currently building out our product to meet customer launch dates later this year. You would be working with our internal team as a subcontractor to build out various projects regarding billing, reporting, external integrations and other work as needed. You will need to be strong in PHP and Symfony 2 and work closely with our senior development team as a remote contractor. Must have good English skills. If you can demonstrate your skill level and prove to be a valuable member of our team, we would be willing to apply for an LMIA for entry into Canada as a future employee of our company.
Category: Other - Engineering &...       
Skills: Symfony, PHP5, Laravel Framework       

d****rts
 [?]
Sign in to view client's details.
| d****rts
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 55m ago  |  Ends: 14d, 17h  |   0 Proposals
Need to Design a 30E EMOD ( ECiggrette) Need a designer who can Design the MOD
Category: Product Design       

p****166
 [?]
Sign in to view client's details.
| p****166
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 57m ago  |  Ends: 14d, 16h  |   10 Proposals
One hectare of land for party/events hall, five seminar/meeting rooms, restaurants, Gym, swimming pool and parking lot.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

l****u52
 [?]
Sign in to view client's details.
| l****u52
|    Germany
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: 7h, 11m ago  |  Ends: 16h, 48m  |   11 Proposals
This is a repost. Please reply again if you're interested. We are in need of a 3D designer who can also 3D print alpha prototypes. We are a small technology start-up designing for the enormous energy industry. The work must be kept strictly confidential. Deliverables we need will be specifications documented, 3D model design, 3D printing of alpha and beta prototypes. This job will be ongoing as we design, print prototype, field test, redesign for improvements and finally working to production ready prototype. We need three distinct prototypes designed and printed. 1. a simple cylinder (several sizes) Max diameter 3", max height 5" 2. an air-tight, donut-like shape, that can open/close. Max diameter 7" 3. A mounting 'bracket' to attach technology to end of cylindrical tube. Max diameter 5", max height 5" ( estimated ) I look forward to your response! Thank you.
Category: 3D Modelling       
Skills: 3D, 3D Printing       
Preferred Location: North America

j****ton
 [?]
Sign in to view client's details.
| j****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 36m ago  |  Ends: 14d, 15h  |   6 Proposals
We are looking to create a rubber surf fin. We have tested endless models and we are now to a point where we would like to create our own fin. I have attached a photo of the rough concept of our end product. Let me know if you would be interested.
Category: Other - Engineering &...       

m****all
 [?]
Sign in to view client's details.
| m****all
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 11m ago  |  Ends: 14d, 14h  |   5 Proposals
I need a circuit designed using TJA1054AT Transceiver and a MC with built in Can controller or separate CAN controller and MC. I would prefer MC to be PIC, Arduino, or AVR based. I would also like a C program created that would control this CAN bus running at common BUS rates but 83.3k must also be supported. I want to be able to add my own messages to the C code. I need this to be easy to understand and implement. As an example MSG1(ID, DLC, DATA bytes 0-7, Cyclic rate). Please respond with quote for this. I am looking at the end of March to start this project.
Category: Other - Engineering &...       
Skills: Electrical Engineering, C, Electronics       

P****L76
 [?]
Sign in to view client's details.
| P****L76
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: 8h, 53m ago  |  Ends: 14d, 14h  |   10 Proposals
I have questions about a project that is in the concept phase and I need advice about the direction I need to take and what would be involved with the electronic development.
Category: Electrical       

J****b42
 [?]
Sign in to view client's details.
| J****b42 *
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 11h, 18m ago  |  Ends: 14d, 11h  |   3 Proposals
Clickey is a key organizer that hold up to 6 keys . made from leather and stainless steel . i need a design and prototype for the lock mechanism that has also light in it . the picture attached is very similar to the idea but different lock mechanism , which is needed with a light . thanks
Category: 3D Modelling       

h****nho
 [?]
Sign in to view client's details.
| h****nho
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 12h, 49m ago  |  Ends: 14d, 10h  |   7 Proposals
Need a machinist to develop a custom air nozzle for low pressure - low velocity air. The nozzle is large - smallest diameter will be 10mm and the largest approximately 40mm . for prototypes the nozzle can be made out of any material. Paper, wood, metal are all ok. You will make several different shapes and size of nozzle then blow air through the nozzle. The air will carry small bits of paper or sawdust so we can visualize the air flow. You will take photos of the different nozzles recording the pattern of particle distribution and send them to me. I will give you feedback and we will continue trial and error to develop the right size and shape of nozzle.
Category: Mechanical       

1****sky
 [?]
Sign in to view client's details.
| 1****sky
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 3-4 weeks  |  Posted: 12h, 57m ago  |  Ends: 14d, 10h  |   0 Proposals
Seeking a level III non destructive testing technician to support a 15 - 20 day assignment in South America. This assignment will be to assist in the development of a training program in accordance with ASNT-TC-1A or ISO 9712. Must possess a valid US or Canadian passport.
Category: Civil & Structural       

a****yer
 [?]
Sign in to view client's details.
| a****yer
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 15m ago  |  Ends: 6d, 8h  |   3 Proposals
Looking for a creative futuristic mind to create a 3D concept model of a strength scale- it will measure the strength of the world's strongest man and maybe a few superheros. In fact, I was thinking of it having sort of a batman feel ] I admire your work, hopefully we can work together. Notably, my project deadline is March 21st. Please send me a reply of your fee schedule at your earliest opportunity ready to work. This is my first time using elance. I hope that you are available to assist in the execution of this cutting edge invention.
Category: Product Design       
Skills: 3D Design       

A****sir
 [?]
Sign in to view client's details.
| A****sir
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 20m ago  |  Ends: 14d, 8h  |   0 Proposals
Looking for an experienced seamstress to make two dress samples for a London based Bridalwear company and have availability Thursday 5 March and Friday 6 March. Potential for more freelance work. Must have at least 5 years experience making high end, luxury garments, understand how to make bias cut dresses, and can work with silks. Must have space to cut, make and trim garments and have a very good understanding of garments and high end dresses. Work from home and must have own machinery. Sabina
Category: Contract Manufacturing       
Skills: dressmaking, machining, sewing       

S****sem
 [?]
Sign in to view client's details.
| S****sem
|    United Kingdom
Hourly Rate: About $15 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 14m ago  |  Ends: 8h, 45m  |   17 Proposals
I have complete drawings and BOM for a training/athletic device I am developing. . My current concept also requires welding and machining in addition. I am looking to reverse-engineer this concept into a simpler version with more standard parts and to reduce welding and machining wherever possible. I would even like to consider aluminum or some other material. My goal is to find a solution which falls under $80 range (90% reduction) even for the prototype so that I can reasonably test and potentially produce in larger quantities later.
Category: Product Design       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 38m ago  |  Ends: 14d, 6h  |   33 Proposals
I looking for an Autodesk AutoCAD Drafting Professional that can assist me in setting up structural engineering plans. It would mainly consist of taking the Architectural or design plans and converting them into a structural set using my CAD standards which I would provide. You would change all their CAD layers to mine and I would provide initial markups of where lateral and gravity elements would need to be. For example: A typical plan would have roof framing showing and upper walls and shearwalls. I would also like to have standard details cut and I would provide markups for that also. I may give hand drafted sketches of details that I would like drafting to CAD as well. Also, a working knowledge of creating AutoCAD dynamic blocks would be a plus. I have several ideas but don't have the time to get them made. Experience in structural engineering drafting is not required but would be a plus also. I would like to use dropbox to share items back and forth for the most part. May...
Category: CAD       
Skills: AutoCAD, Drafting       

j****216
 [?]
Sign in to view client's details.
| j****216
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 38m ago  |  Ends: 6h, 21m  |   29 Proposals
I need to create a 3D model, based from a STL model. The part is casted. The final result must be a STEP, Parasolid or NX Unigraphics file. Requirements: *The new part must be designed in the same coordinate system(WCS) as the STL file. *General tolerance is +/-0.3mm. *Holes can be ignored. *A fix price. *Delivery time. Best regards
Category: 3D Modelling       
Skills: 3D, Reverse Engineering       

e****865
 [?]
Sign in to view client's details.
| e****865
|    Norway
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 20h, 34m ago  |  Ends: 14d, 2h  |   1 Proposal
Service Engineer Description · Engineer is expected to carry out preventive maintenance / corrective / emergency maintenance visits at customer sites on DCS/PLC/SCADA systems · Preventive Maintenance ? Cleaning, Backup, Modification, Report Submission of existing running system. · Corrective Maintenance ? Restoring the system from any faults in the system · Shutdown Maintenance · Logistics Management ? Individual should carry the material for restoring the problem at site. Material IN and Material Out at customer premises with proper documentation. · PC troubleshooting and Networking · Documentation ? 40 % documentation is involved · Special Tasks · Knowledge of DCS and PLC with a hands-on experience. · Matured skills in independent troubleshooting / problem resolution on these platforms. · Understand customer needs & extend Service Support at site / remote for prompt issue closure ensuring adherence to Honeywell Process and Quality matrices. · Build, Develop & Sustain Customer...
Category: Mechanical       

r****978
 [?]
Sign in to view client's details.
| r****978
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job