Save this Search
     

All JobsEngineering & ManufacturingHourly

 (298 results)  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 29 minutes ago  |  Ends: 23h, 30m  |   0 Proposals
A report on Engineering Innovation and ethics. Discussing the electromagnetic radiation of the microwave region and its effect on us. It also talks about the innovation of microwave ovens and how does engineers approach it's development from an ethical perspective. About half of the report content is done (headings andsome main points with supporting materials). I just need someone to help me finish the rest. Please note: The report has to be completed by 10pm on Sun 29/03/2015
Category: Chemical Engineering       

M****-BS
 [?]
Sign in to view client's details.
| M****-BS
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 31m ago  |  Ends: 14d, 22h  |   2 Proposals
I need help routing the traces on a PCB that I designed using EAGLE. I've already designed the schematic and positioned the components on the board. I just need you to route the traces on the board using only 2 layers (top and bottom). Some of the components (e.g., battery terminals and sensors) cannot be moved from their positions on the board. Most of the components, however, can be moved from their positions on the board to facilitate routing the traces on the 2-layer board.
Category: CAD       
Skills: Eagle       

j****see
 [?]
Sign in to view client's details.
| j****see
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 49m ago  |  Ends: 14d, 21h  |   1 Proposal
I am seeking to create Wi-Fi Router/Modem and fixed telephone both using only ONE SIM (3G/4G). That means the SIM is both data/talk-time. There should be a network connection that should allow both phone and Wi-Fi use a SIM CARD. Skills Required electrical-engineering wireless-network-implementation telephone-skills network-engineering telecommunications-engineering
Category: Other - Engineering &...       

m****abi
 [?]
Sign in to view client's details.
| m****abi
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 18m ago  |  Ends: 14d, 18h  |   4 Proposals
I'm looking for someone that can design a kitchen product for my business.
Category: Contract Manufacturing       

w****t87
 [?]
Sign in to view client's details.
| w****t87
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: 5h, 32m ago  |  Ends: 25d, 17h  |   6 Proposals
Hello, I am a representative for GM Technik USA located in Los Angeles Ca. My team has been formulating and designing multiple race application exhaust systems for privateer and commercial race teams for 4 years and is expanding our clientele grasp into the public markets. We are looking for 1-2 trained, experienced and diligent persons to aid in the development of a truly revolutionizing exhaust system. It will be required of you to work with our dimensions, weight, materials and project limitations throughout the development process. You will be provided with all the tubing measurements, the engine's exhaust cfm, firing order, and calculated exhaust volume measured at the outlet of the catalytic converter. You will be aiding in the design from the outlet of the catalytic converter to the muffler tips to create a high pitched exhaust note from a low end grumbling cross-plane V8. There will be mild performance requirements from this exhaust system however the main focus of this job is ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, CATIA       

G****USA
 [?]
Sign in to view client's details.
| G****USA
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 42m ago  |  Ends: 1d, 14h  |   10 Proposals
I am looking for a 3D modeller in Solidworks with mechanical engineering background on hourly basis to modily some electrical fittings. Experience in product design and preparing it for 3D printing is desireable.
Category: 3D Modelling       
Preferred Location: Western Europe, Eastern Europe

A****jal
 [?]
Sign in to view client's details.
| A****jal
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 25m ago  |  Ends: 14d, 13h  |   3 Proposals
Sometimes I have overloads with new work in my small Design and Drafting business. I am looking for a medium skill user to assist me on a case by case basis for creating residential construction plans in SW Florida. all work can be done via internet.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

b****rrm
 [?]
Sign in to view client's details.
| b****rrm
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 13h, 36m ago  |  Ends: 14d, 10h  |   3 Proposals
Design............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Category: Mechanical       
Skills: CATIA, Autodesk       

M****nir
 [?]
Sign in to view client's details.
| M****nir
|    Egypt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 13m ago  |  Ends: 14d, 7h  |   1 Proposal
Our company plans to manufacture a projector with large optics. We want to outsource the design of the projector lens. The lens system must be a semi-zoom type: it can exist of two pieces which are then mounted inside the projector in a fixed position, allowing a small zoom range. The lens system must have good resolution and must have good chromatic aberration correction over the visible range (something like a cooke-triplet lens) The designer needs to be very familiar with design software such as optalix, zemax or a similar package. The designer needs to start from our general requirements an a rough skech, and produce detailed specifications of the lenses and run simulations in the design software proving the resolution and limited chromatic aberration of the design. Production will be outsourced to an Asian company using the specifications set by the freelance designer. The projector will have a total length of 1.2 to 1.8 meters, 2kW HMI lamp, elliptical reflector of 365mm, t...
Category: Other - Engineering &...       
Skills: lens design, optical design, zemax       

r****nsm
 [?]
Sign in to view client's details.
| r****nsm
|    Belgium
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 22h  |   21 Proposals
Hello, I'm currently looking for a designer that can help me turn my functional, rough prototype into an aesthetically pleasing working prototype that I can show to investors and potential customers. My product is an accessory to be used on children's car seats, strollers, etc. In the proposal please include your approach to this particular job, previous work experience/samples, and estimated time it will take to complete project. Please email me for any additional information or if you have any questions. I look forward to working with you! Thanks
Category: Product Design       

L****ard
 [?]
Sign in to view client's details.
| L****ard
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   3 Proposals
Need someone to do deformation analysis in Abaqus. I will provide the full meshed model. You just need to convert it to quarter model and run the job. Submit the input file and a short 2-3 page report containing screenshots of the results.
Category: Mechanical       
Skills: Mechanical Engineering, Abaqus, hypermesh       

h****23k
 [?]
Sign in to view client's details.
| h****23k
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 19h  |   16 Proposals
I need someone to create a model of a gilette Malibu razor to scale in solidworks ASAP the file must be fully defined and built using surfacing
Category: 3D Modelling       
Skills: 3D Modeling, SolidWorks       

S****ins
 [?]
Sign in to view client's details.
| S****ins
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 16h  |   5 Proposals
I have to come up with a simple 2d cad drawing to scale. I would like to use LibreCAD and have someone help me do it, so that I can learn the basic functions for changes that I may have to make later. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****edo
 [?]
Sign in to view client's details.
| a****edo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 14h  |   0 Proposals
Necesitamos ingenieros electronicos de Peru para diseñar mainboards para un proposito especifico , que tengan mucha práctica/conocimiento en construir/reparar/modificar placas madre.
Category: Electrical       

k****ton
 [?]
Sign in to view client's details.
| k****ton *
|    Peru
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 12h  |   25 Proposals
Our client is looking for a talented CAD designer for occasional work. The requirement is to create two drawings out of a handwritten plan our client creates while meeting up with a client. The first drawing is to be inserted into a sales presentation document and should be in sketch format. The next drawing is a detailed plan in AutoCAD, to be used on a construction site. The need is asap.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

m****ner
 [?]
Sign in to view client's details.
| m****ner
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 11h  |   3 Proposals
S & S Engineering, Inc. is a MEP Engineering firm located out of Overland Park, KS. Established in 2004 by Santanu Nath, S & S is involved in numerous projects for around the city and state. Currently our engineers hold licenses in Kansas, Missouri, Ohio, Michigan, Illinois, Texas, and Mississippi. With a combined 75 years experience from our veteran staff, we drive to promote green technologies and sustainability. Our specialties are in commissioning, mechanical, plumbing, fire protection, energy efficiency, alternative energy, and control systems. S & S Engineering, Inc. seeks proactive, creative employees with excellent technical skills and a client-centered approach to join our team. The wide range of experience levels from our current team members and Principals allows new and veteran staff to share their knowledge of the MEP design field. S & S puts their focus on individual careers where, through training and mentoring, the leadership helps inspire staff...
Category: CAD       

m****irl
 [?]
Sign in to view client's details.
| m****irl
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 11h  |   15 Proposals
I would like to prototype a board that will: - Read a temperature from a sensor - Based on the temperature, it will have a pre-set requiremet to reach x degrees in x minutes (for example, I need to reach 50Degrees in 15 minutes) - Based on the above logic, it will have to control a gas valve to open or close it. I need a consultant help in order to: - Program it using arduino (desirable to log some info to raspberry PI) - Help on the list of components to be used (which temperature sensor to use, which gas valve to use, ...)
Category: Electrical       
Skills: Electrical Engineering, Electronics, Arduino       

a****elo
 [?]
Sign in to view client's details.
| a****elo
|    Brazil
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 27, 2015  |  Ends: 13d, 11h  |   14 Proposals
Looking to patent my product. I need someone who can help draft a design or utility patent, including illustrations per USPTO requirements. Also need a 3D CAD verison of the product. Also looking for : Different concept designs for the product (Simply put a better version of what I currently have).
Category: Product Design       

c****asb
 [?]
Sign in to view client's details.
| c****asb
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 11h  |   1 Proposal
I am looking for a Service Engineer to do troubleshooting, small modifications, service on machine we have installed and commisionned with clients of us in the USA, Michigan - Chicago area. Required knowledge, Siemens TIA portal, drive technologie.
Category: Electrical       

T****edt
 [?]
Sign in to view client's details.
| T****edt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 10h  |   16 Proposals
I want this to be designed on a software, one piece item. It's simple, I have the sketch and I want it designed to I can get it manufactured. It's a bedsheet holder, made of flexible plastic. Is it possible to also have a prototype made, possibly by a 3D printer? Thanks.
Category: Product Design       
Skills: AutoCAD       

a****a22
 [?]
Sign in to view client's details.
| a****a22
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 5h  |   5 Proposals
I have a project where i need to flash a NAND chip attached to a Marvell PXA320 processor. I need to be able to disable the I/O section of the 320 so it does not interfere with in circuit programming of the NAND chip. I need to know what to do and how to do it.
Category: Electrical       

r****009
 [?]
Sign in to view client's details.
| r****009
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 28d, 3h  |   1 Proposal
Need Collaboration Partners for electronics business with capital investment. Please send across your profile so that we could discuss further. Thanking you.
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Middle East & Central Asia, Central & South America, Africa, Australia/Oceania

s****dia
 [?]
Sign in to view client's details.
| s****dia
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job