Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 10h, 3m ago  |  Ends: 13h, 56m  |   16 Proposals
The job is to make architectural concept drawing very quickly from a hand sketch. The input is some hand drafted building layouts, and some sample drawings from other sources too show building style and ideas. The output would be a semi-finished architectural concept drawing using auto cad. This is not final construction drawings, its rather at the level where lay people looking at the drawing would get an idea of the building. The output would show the layout, measurements, and an outside views and elevations. Preferably in a nice 3d view, not just technical construction drawings. Likely there would be iterations. This is therefore a hourly job, which needs fast turnaournd and iteration. The job needs to be ready (after iterations, which include correspondence), within 24 hours of this job posting. So this is really fast paced. Its not a big job, but there may be some more like this and there might me bore detailing. Hourly paid. Start immediate. Send samples of you work.(ID:...
Category: Architecture       

T****Ltd
 [?]
Sign in to view client's details.
| T****Ltd
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 14m ago  |  Ends: 8h, 45m  |   1 Proposal
Need to hire USSD developer for developing apps on a platform with minimal knowledge about coding its an easy jobbbb
Category: Product Design       

U****pia
 [?]
Sign in to view client's details.
| U****pia
|    Singapore
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 17h, 46m ago  |  Ends: 6h, 13m  |   6 Proposals
Looking help for project on systems engineering where taking one system as model and identifying the subsystems, functions, concept exploration, concept definition, performance requirements etc
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Australia/Oceania

r****143
 [?]
Sign in to view client's details.
| r****143
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 47m ago  |  Ends: 6d, 0h  |   22 Proposals
I'm looking to have 3 different small boards laid out so they can be printed / assembled, and later mass produced. I have most the details, and they are small and simple boards (capacitive touch chips that run LEDs) approximately 10-30 components. Will need a little help revers engineering a board I already have. Thanks, Mark Johnson
Category: Electrical       
Skills: PCB Design, Circuit Design       

E****Art
 [?]
Sign in to view client's details.
| E****Art
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 5d, 7h  |   7 Proposals
A team designing a 20m Outrigger Canoe want assistance in developing a Maxsurf 3D model of the boat. Interesting project combining the Philippine Banka, Thai long tail, and Western trimaran. No specific experience needed in this sort of boat as the developers can shape the boat with you using Skype or over shoulder. First step 3D shaping off CAD GA. ....then frame profiles. Apply.....
Category: 3D Modelling       
Skills: 3D, Rhinoceros 3D       

K****din
 [?]
Sign in to view client's details.
| K****din
|    Singapore
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 28, 2015  |  Ends: 4d, 23h  |   0 Proposals
Technical translator required for CCC branding audit from Chinese auditors in Delaware, Ohio on August 17th and 18th. They might also require assistance during check in and check out of the hotel, and at dinners, on the 16th and 19th.
Category: Other - Engineering &...       
Skills: Materials Engineering, Manufacturing       
Preferred Location: United States

E****gne
 [?]
Sign in to view client's details.
| E****gne
|    France
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 4d, 4h  |   6 Proposals
Chemical distribution company needs help connecting customers with the specific material/product they need for their application. We receive requests that are outside of our normal scope of work and need to accommodate these customers in a timely manner with expert service. Example: customer needs a plastic polymer for making molds. Customer is unsure what grade they need, but the end product must be vibration and impact resistant. So we will give you the names of a few suppliers and you'll research and come back with some products that should work for them. Example: customer needs Magnesium Oxide for concrete, but doesn't specify nor understand what grade they need. Your job is to determine what grades of this chemical are commonly used for this application, and advise which would be appropriate. This position would not require direct interaction with the customer; we will simply ask you our question(s) and give you all known relevant information for you to begin your search. You...
Category: Chemical Engineering       

p****345
 [?]
Sign in to view client's details.
| p****345
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 23h  |   9 Proposals
My company markets various consumer products, primarily low-tech electronics such as flashlights, lanterns, various LED lighting (decorative, seasonal), occasional furniture, hand tools and implements. Need some mechanical/industrial design assistance to refine/modify/update/stylize products selected from Asian manufacturing partners. Some graphic art assistance would be a welcome additional skill set as well as some photo-realistic imaging. Have competent Chinese engineers at my factories to execute these modifications, the creation of which, however, is beyond their capabilities. San Diego domiciled freelancer desired.
Category: Product Design       
Skills: AutoCAD, Product Design       

n****nor
 [?]
Sign in to view client's details.
| n****nor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 22h  |   6 Proposals
We are developing trick shot racks for billiards and are in need of help to discover the correct alignment for each of the balls and their exact positioning. We need assistance as to how to mathematically determine this using the physics involved in billiards.
Category: 3D Modelling       
Skills: AutoCAD, 3D Printing, Physics       

r****ley
 [?]
Sign in to view client's details.
| r****ley
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 22h  |   23 Proposals
SnapBack Corporation I have a concept for a new niche product that I would like to continue designing, sourcing and manufacturing. I have already done one round of schematics with an engineer but would like to further develop the product. Also as tooling for a completely new product may be cost prohibitive, I would also like to see if making smaller improvements through new custom design elements may be cost effective combined with an existing off the shelf product. I am open to all forms of creative product ideas. If we don't need to reinvent the wheel, let's not. My prototypes to date have been off the shelf product that I have retooled. I'm open to investigating whether or not a custom solution is best. If again we can solve the product issues through existing products and custom assembly then that might be the best way to get the product launched and off the ground. The custom solution may come later due to cost constraints and a viable product market. Translation; le...
Category: Product Design       

w****ore
 [?]
Sign in to view client's details.
| w****ore
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 22h  |   36 Proposals
Project Description: I am looking for a seasoned mechanical engineer to further enhance a dispensing system. The candidate should have experience with gear design, working knowledge of injection molding and experience working with polymer plastics. I am strictly looking for an engineer that have solid experience with mechanical design rather than a drafter. The candidate should also have experience with Solidworks,FEA and solidworks simulation.
Category: Mechanical       

p****uge
 [?]
Sign in to view client's details.
| p****uge
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 22h  |   7 Proposals
We are looking to hire someone experienced in: Casting, mold making, Local to Southern California. We want to cast an item, make a mold, and make a only a few copies of said item. If you or someone you know if Experienced to build the box, cast the part, etc, we'd like have some work for you. thank you.
Category: Product Design       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 20h  |   27 Proposals
We need to have a technical CAD drawing of a small plastic part we need manufactured. This part will probably be made by plastic injection molding. The part exists and we can send it to you to create the drawing. See attached photo. Also needed is an actual RFQ based off your drawing that we can send to manufacturing companies. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

P****LLC
 [?]
Sign in to view client's details.
| P****LLC
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 20h  |   24 Proposals
I need assistance building a CAD template based off my sketches of carbon fiber parts for a 'micro drone'. Creative input is welcome.
Category: CAD       

b****fpv
 [?]
Sign in to view client's details.
| b****fpv
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 19h  |   5 Proposals
I am looking for an architect who is familiar with the NY State building and fire code (which I believe is the same as the national building and fire code) to design a staircase to an addition to our existing second floor, to a space that will be used for offices. The space that we are dealing with used to be a 20' high automotive shop.We put up steel work to create retail stores on the first floor and offices on the second floor. The staircase will be inside the building. I need to have an architect determine if I can use a glass door to access the staircase from the outside, to confirm, if permissible, to have a bottom landing that is the same length as the width of the stairs etc. We have a layout of the offices on CAD. The offices will be rented to individual tenants. I need an architect to check that our plans meet the fire code. For example, do the one hour fire rated dividing walls of the offices need to extent to the deck (the bottom of the roof) or just to the drop ceiling?(I...
Category: Architecture       
Skills: Architecture       

p****jbn
 [?]
Sign in to view client's details.
| p****jbn
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 19h  |   1 Proposal
Need a developer familiar with making wifi and 4g connections between iphones and ipads. Must be familiar with the iOS language and swift.
Category: Other - Engineering &...       
Skills: Bluetooth, Digital Electronics       

C****eLC
 [?]
Sign in to view client's details.
| C****eLC
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Jul 22, 2015  |  Ends: 6d, 19h  |   15 Proposals
Hello, Duffy Properties located in Waltham Massachusetts is looking for someone who can properly label our existing drawings with tenants and the square footage. We have so many tenants that we would like to color coordinate them by the remainder of time on there lease.
Category: Architecture       
Skills: Adobe Illustrator       

a****ian
 [?]
Sign in to view client's details.
| a****ian
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 18h  |   1 Proposal
Need some design help with electronic component selection and other safety design aspects of design for C1D1 wireless tank sensor. UL913 UL/CSA 60079-0 UL/CSA 60079-11 Mostly complete but need some consultative input.
Category: Product Design       
Skills: Electronic Design       

r****o99
 [?]
Sign in to view client's details.
| r****o99
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 17h  |   2 Proposals
I am part of a two-person kitchen appliance manufacturing company in New York City. We create our prototypes with a 3D printer, send them to our Chinese manufacturer and work back and forth until we have our final product. Our next product is going to be a centrifuge that can be used in the kitchen (currently not rated under UL standards). We're getting our second centirfuge prototype from our manufacturer next week. This centrifuge has a lot of moving parts, specifically a rotor that spins at 4k RPM. We are looking for a PE consultant to help us with the testing, standards, compliance, etc for the centrifuge.
Category: Other - Engineering &...       

n****8se
 [?]
Sign in to view client's details.
| n****8se
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 17h  |   5 Proposals
I'm looking to create my own line of cabinet knobs to sell via my website   [obscured]   Currently, I'm selling a number of other top manufacturers. For my personal line, I'm less interested in completing with the top brands like Amerock, Top Knobs, etc. for standard metal hardware and more interested in selling unique, artsy knobs closer to those sold on places like Etsy or Anthropologie, obviously without copying anything proprietary. I'm especially interested in products that can bring positive attention to the company. I'd be interested in sourcing from disadvantaged communities, using unique and sustainable materials, etc. The more we can create a brand that people talk about, the more it will help with sales of all of our products. I'm looking for a sourcing expert to take on this task and lead the way. This person should have a mix of experience, connections, and creativity.
Category: Product Design       

T****OTL
 [?]
Sign in to view client's details.
| T****OTL
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 14h  |   7 Proposals
Hi, We are a startup looking to talk to highly skilled engineers on the elance platform to understand and improve your experience as a freelancer. We would really appreciate a 30-min conversation over the phone. Note: We don't have any funding as of now and hence cannot pay any incentive. We do hope to learn from your feedback and build a product or service that helps you out. Josh
Category: Mechanical       
Preferred Location: North America

t****ded
 [?]
Sign in to view client's details.
| t****ded
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 22, 2015  |  Ends: 6d, 9h  |   5 Proposals
its a job about transmission lines and prefer to the light and power its depends on power generating and distributed with logical area around city
Category: Electrical       

D****v98
 [?]
Sign in to view client's details.
| D****v98
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 9h  |   7 Proposals
We are looking for oil and gas electrical, instrumentation, mechanical, structural, sub sea and operations writers and or instructors. You will be required to create outlines and then content for a range of courses ranging from oil and gas offshore platforms to refineries in topics from E&I Facilities Engineering to undersea engineering. Please clearly indicate your experience and ability to write and or instruct competently. You must be a qualified engineer with relevant experience. Topics include ? Process Safety Fundamentals ? Introduction to Oil and Gas Production Facilities ? I&C Fundamentals ? HAZOP ? LOPA ? Heat Transfer & Separation ? Pressure Relief Design ? Flow Assurance $20-$25 AUD Per Hour for writing work. Instructing fees TBA.
Category: Other - Engineering &...       
Skills: Technical Writing       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 6d, 8h  |   52 Proposals
Hi I'm Glen. I have a timber decking business in Australia (see justdeck.com.au) This job will be a longterm position for the right candidate and comes in two parts: Part 1 - I'm looking for someone who can turn my hand drawn sketches and site photos in realistic, life-like 3D models that I can email to prospective clients as part of my project proposal. Part 2 - once we have been awarded a decking construction project I will need a set of construction plans. These will include: floor plan, elevations, joist and bearer layout All plans and 3D models will need to emailed as PDF's I will need each new job completed and returned to me ready to submit to my prospective clients within 48hrs, no later Please see attachments for examples of the images you'll receive from myself. Each job will also come with a detailed written description.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****ing
 [?]
Sign in to view client's details.
| a****ing
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: 1-3 months  |  Posted: Jul 22, 2015  |  Ends: 6d, 7h  |   37 Proposals
We are building a new constructed home and need full service plans I have provided some plans and pictures of what I want the home to look like and layout you can find the pictures attached. I am looking for someone to draw up the blue prints for a house and any other sketches I might need if you have any questions please feel free to ask me anything. I want with all of the measurements and there will only be a small amount of changes. Here is the link of the home I want you can also find pictures attached as well I would like to make some minor adjustments to the design the front of the house.   [obscured]  /realestateandhomes-detail/720-Jefferson-St-NW_Washington_DC_20011_M59012-23997   [obscured]  /DC/Washington/720-Jefferson-St-NW-20011/home/40387764
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

K****030
 [?]
Sign in to view client's details.
| K****030
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job