Save this Search
     

All JobsEngineering & ManufacturingHourly

 (261 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: May 28, 2015  |  Ends: 13d, 11h  |   12 Proposals
General This project has the ability to send GPS data to a central server using GSM over TCP/IP. There will be some input to control and output for activate ex. a relay. As MCU platform the ATMEL 328p has been used running 8MHz. It is essential the program use absolute minimum power consumption. Programmer need to know how to set MCU, GPS and GSM in sleep and standby mode. The hardware contains a 3 axes sensor for Tilt, acceleration and movement, which will be part of the software. The hardware is driven by a 400mA 3v7 battery. All documentation will be available with direct technical support from hardware supplier.
Category: Electrical       

s****ics
 [?]
Sign in to view client's details.
| s****ics
|    Denmark
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 28d, 10h  |   6 Proposals
I am trying to implement a similar design for a built-in air pump that you see in air mattresses that auto inflate upon switching on pump (picture attached). It will have to be welded (or HH-66) into the air mattress design which is made of vinyl coated polyester.
Category: Mechanical       

p****kb8
 [?]
Sign in to view client's details.
| p****kb8
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 28d, 9h  |   3 Proposals
We are looking for a chemist that knows their way around time released chemicals related to teeth. Due to sensitivity of information, pay structure is determined privately.
Category: Chemical Engineering       
Preferred Location: North America

m****one
 [?]
Sign in to view client's details.
| m****one
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   1 Proposal
Hi Albert, You have an impressive resume. Are you able to recreate a skin lotion? The lotion I have has been taken off the market and I would like to re formulate it. I have a list of ingredients and a sample. Unfortunately I don't have any information about the concentration levels of each ingredient. Is it possible for you to determine the levels of each ingredient and create an identical product? Also, would you mind signing a Confidentiality Agreement? Thanks Sean
Category: Chemical Engineering       

S****117
 [?]
Sign in to view client's details.
| S****117
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   0 Proposals
Hi Glen, You have an impressive resume. Are you able to recreate a skin lotion? The lotion I have has been taken off the market and I would like to re formulate it. I have a list of ingredients and a sample. Unfortunately I don't have any information about the concentration levels of each ingredient. Is it possible for you to determine the levels of each ingredient and create an identical product? Also, would you mind signing a Confidentiality Agreement? Thanks Sean
Category: Chemical Engineering       

S****117
 [?]
Sign in to view client's details.
| S****117
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   0 Proposals
Hi Glen, You have an impressive resume. Are you able to recreate a skin lotion? The lotion I have has been taken off the market and I would like to re formulate it. I have a list of ingredients and a sample. Unfortunately I don't have any information about the concentration levels of each ingredient. Is it possible for you to determine the levels of each ingredient and create an identical product? Also, would you mind signing a Confidentiality Agreement? Thanks Sean
Category: Chemical Engineering       

S****117
 [?]
Sign in to view client's details.
| S****117
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   1 Proposal
Hi Esinam, You have an impressive resume. Are you able to recreate a skin lotion? The lotion I have has been taken off the market and I would like to re formulate it. I have a list of ingredients and a sample. Unfortunately I don't have any information about the concentration levels of each ingredient. Is it possible for you to determine the levels of each ingredient and create an identical product? Also, would you mind signing a Confidentiality Agreement? Thanks Sean
Category: Chemical Engineering       

S****117
 [?]
Sign in to view client's details.
| S****117
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 88d, 8h  |   1 Proposal
We're a skincare manufacturing organization based in ahmedabad. Our product range includes lip balms, lip butters, skin lotions and body butters. We are looking for a free lance cosmetic chemist who would be interested in consulting for formulations.
Category: Chemical Engineering       
Skills: Manufacturing       

G****anp
 [?]
Sign in to view client's details.
| G****anp
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 8h  |   3 Proposals
Hi everybody, I'm posting here on behalf of my company recently created. We are planning to launch few baby products in the coming months, and among them we have a baby blankets. For those who do fabric design, we're wondering if you could provide us with a design similar to this one in style :   [obscured]  -fee.ca/wp-content/uploads/2014/04/image1.jpg We would like to have a baby sitting over a throne with a crown over his head and a cloak floating behind him! Do you think you'd be able to this? How much time will it take? And how much do you estimate the price? :) Thank you very much, Have a nice day.
Category: Product Design       

m****204
 [?]
Sign in to view client's details.
| m****204
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 7h  |   14 Proposals
I am looking for a PCB layout (ie Eagle CAD files) for an Arduino Mega shield featuring an RS232 and RS422 (full duplex) port using the TTL level UARTS supplied on the Mega. The shield should provide a terminal block access (3 connectors for the RS232) and (4 for the RS422) which should be positioned on the power supply/USB end of the Mega. A bonus would be to have LEDs to signal communication activity on ports.
Category: CAD       
Skills: Electronic Design, PCB Design       

p****rks
 [?]
Sign in to view client's details.
| p****rks
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 6h  |   3 Proposals
Charity open water swim 8/15/15. Need waterproof individual ankle or wrist timing device for participants swimming 2.4 mile race in 70 degree lake. Start and finish line same location.
Category: Electrical       

t****tis
 [?]
Sign in to view client's details.
| t****tis
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 5h  |   2 Proposals
Need expert who working on HDMI and understand everything in deep. ready to start work now we need expert in audios
Category: Electrical       

i****t41
 [?]
Sign in to view client's details.
| i****t41
|    Pakistan
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 3h  |   12 Proposals
The current version of the device is fairly basic, stands about 12 inches tall and contains 18 total parts. The basic features/movements of the device are simple, but the current components are unnecessarily complex. I want to re-design the prototype to be more streamlined and simple. I had a prototype done in SLA and have previously had individual device parts 3D printed in ABS. I would like to work with someone who: 1) is capable of helping envision a new design that simplifies aesthetics while improving function; 2) is capable of using software to actualize these design(s) so they can be prototyped and tested; 3) can provide ideas on manufacturing optimization (tooling, CNC, 3D print, etc.) at different stages of development; 4) can show they will hold my work in strict confidence. I look forward to working with you! -Camden
Category: Product Design       

c****ong
 [?]
Sign in to view client's details.
| c****ong
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: May 27, 2015  |  Ends: 13d, 2h  |   2 Proposals
A lens group design is needed for wide visual angle requirement in a limited space (device will be closed to eyes)
Category: Architecture       
Skills: optical lens design, zemax       
Preferred Location: United States

G****Pal
 [?]
Sign in to view client's details.
| G****Pal
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: May 27, 2015  |  Ends: 13d, 1h  |   2 Proposals
Our web site is in bad shape. I have written up some items for each tab. I need someone to go over the draft and edit. The writer do need to understand the meaning of technical words and edit accordingly. We do not need technical editing or new technical writing. Just make the words flow smooth. It is hard for you to quote but if the text is simple English, how much time approximately it takes to edit one page? I have about 20-30 pages to edit right now. May be more later on.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

p****uka
 [?]
Sign in to view client's details.
| p****uka
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: May 27, 2015  |  Ends: 13d, 1h  |   16 Proposals
Hello - We have misc work to do, including the conversion of some details to our Revit Lite 2016 firm style/font. 2 or 3 times a month, we also have some house to setup in Revit from an asbuilt Autocad file we receive from our asbuilt specialist. We can provide template files so the style is consistent. Thanks!
Category: Architecture       
Skills: Architecture, AutoDesk Revit       

d****ais
 [?]
Sign in to view client's details.
| d****ais
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 1h  |   5 Proposals
Develop a hardware/software car battery system with the following two basic functions: 1. Identify when the car battery no longer carries the required charge to start the car. 2. Triggers an auxiliary connection, which is attached to the car battery, to take another binary action (activation of a secondary system). The second system does not need to be developed. It is only necessary for the trigger to activate the second system. Please contact me with your relevant experiences, questions, and if possible a general price range. I will share more information as needed. Thank you, Michael
Category: Mechanical       

m****o55
 [?]
Sign in to view client's details.
| m****o55
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 0h  |   2 Proposals
You need to design a 2KW PM reluctance motor. I will send the full specifications as we proceed. I prefer you use JMAG for the design. Ansoft Maxwell is ok though. After the design is approved you need to source the material and assemble that stator and the rotor of the motor. The bearing and the balancing are not important. I can manage that at my side. I will provide more motor specifications as we proceed. Regards
Category: Electrical       

G****te2
 [?]
Sign in to view client's details.
| G****te2
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 23h  |   11 Proposals
Hello Sam, My name is Rory, I live in Las Vegas, Nevada. I have a specific product that I have been trying to source from China. I was able to find one supplier on Alibaba, I contacted them and they were not willing to sell me the product. I think that perhaps they limit the amount of USA buyers of this product. I think that maybe they would be willing to sell to a Chinese person. If not, I would like you to find another supplier of this product. If thats not possible I would like to find a manufacturer willing to make this product for me. It is a very simple product, not expensive at all. Its a specific type of immersion water heater. Are you interested in working with me? Please let me know. I appreciate your time. Regards, Rory   [obscured]  
Category: Mechanical       

r****ay1
 [?]
Sign in to view client's details.
| r****ay1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 22h  |   9 Proposals
I am looking for an experience electrical engineer who can help integrate my wearable device and develop the connecting smartphone application via BLE/wifi/or other wireless mediums.
Category: Electrical       

r****ler
 [?]
Sign in to view client's details.
| r****ler
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 22h  |   2 Proposals
Im looking to design a mobile cryo-chamber with a particular set of specifications. The component equipment has already been designed but I need to fit it into a mobile platform. My application is quite specific but the partnering company has already built something similar. I just need to tweak it to fit my application and business model. Please feel free to contact me asap.
Category: Product Design       

T****pat
 [?]
Sign in to view client's details.
| T****pat
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 22h  |   26 Proposals
Hello, I need help to draw a battery box with components on SolidWorks 2013. Please find attached a pictures of the box. For this job, I will be able to provide more pictures and dimensions. Thank you. Luiz
Category: CAD       
Skills: SolidWorks       

l****ffo
 [?]
Sign in to view client's details.
| l****ffo
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 21h  |   5 Proposals
Has a combined structure of concrete and wood and consists of some large openings for infinity wall door systems. The main core of the house being concrete with load bearing eco-brick walls and a large wood deck around the second story. I have the design of the structure and need just to analyze/calc it and verify the loads. Easily done in a day's work for a the right person.
Category: Civil & Structural       

c****sse
 [?]
Sign in to view client's details.
| c****sse
|    United States
Hourly Rate: $15 - $25 / hr   |  Duration: 1-3 months  |  Posted: May 27, 2015  |  Ends: 12d, 21h  |   7 Proposals
Hey Everyone, Our team is developing a new online Geometric Dimension and Tolerancing fundamentals course that we are very exited about. Our goal is to expand GD&T training beyond the classroom into an on-demand video/lecture series that is based on the students needs. We have begun to develop our core curriculum that we want to release for order within the coming months. I am the lead course developer for this project, and while I love making the course, it is becoming overwhelming for me to also drive the business and establish our marketing. I want to get the initial core curriculum out the door quickly to start receiving user feedback. I am looking to hire a GD&T Professional who has worked in engineering and can help with the development of our course. Although I need a GD&T expert, I am looking for someone with a bit of an entrepreneurial spirit who is looking for an exciting opportunity to teach others about engineering topics. The work will be part time, so...
Category: Mechanical       
Preferred Location: United States

g****stc
 [?]
Sign in to view client's details.
| g****stc
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job