Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 12 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I'm going to develop a huge firmware and I have just some experience with Atmel microcontrollers. I need someone who can support me during the project because we are gong to use an Renesas or a MSP430 microcontroller. The microcontroller works with GSM:SIM800H, BLE:nRF51822 and GPS: NEO7-M . I think I won't need big part of code but just someone who can explain me some things(Skype) and who can correct my code when I have problem. Replay only if you have experience with the modules involved in this project.
Category: Electrical       

a****e87
 [?]
Sign in to view client's details.
| a****e87
|    United Kingdom
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 1h, 5m ago  |  Ends: 29d, 22h  |   0 Proposals
Looking for a freelance SolidWorks designer. Having understanding of 3D scanning and 3D printing is a huge help. Designer must be within the Metro Detroit Area. Mechanical and product development design.
Category: Product Design       
Skills: 3D Modeling, SolidWorks, 3D Design       
Preferred Location: United States

s****sev
 [?]
Sign in to view client's details.
| s****sev
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 14m ago  |  Ends: 14d, 16h  |   14 Proposals
Redraw this cut away of an engine and leave out all the wording and the arrows. The diagram is to be in black and white and the line work it to be well defined so everything looks technically correct. I will pay $20 for the work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

a****dog
 [?]
Sign in to view client's details.
| a****dog
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 32m ago  |  Ends: 14d, 14h  |   12 Proposals
I am working with some guys on a layout of a design for a radio controller. This board will the the main control for a design we are doing. Design was started in Altium, but needs to be completed. Need to get it done quickly. If it works out we will have some further designs.
Category: CAD       
Skills: PCB Design, Altium Deisgn       

n****rkj
 [?]
Sign in to view client's details.
| n****rkj
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 13m ago  |  Ends: 14d, 13h  |   3 Proposals
Looking for a person who is experiencing with HVAC load calculations, Title 24 drawing duct system design and layout for new and add on systems. The right person must be familiar with California Title 24 requirements, Energypro and building permit requirements for new or add-on HVAC systems.If you have this experience, please contact me ASAP..
Category: Mechanical       

C****cal
 [?]
Sign in to view client's details.
| C****cal
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 33m ago  |  Ends: 14d, 13h  |   17 Proposals
We are looking for an architectural designer who can help design a hand drawn mockup of a tradeshow booth that we are designing for a client. This designer must be able to start working today CST and have the ability to work quickly with a high quality. Being able to speak online is a must, so spoken English skills are a necessity.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

p****iak
 [?]
Sign in to view client's details.
| p****iak
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 13m ago  |  Ends: 14d, 12h  |   6 Proposals
Aeronautical engineer or the like, who is very proficient with Soldworks or similar software. I have a few variation of a wind turbine design that I would like to have an air flow analysis done of four designs and an animation presentation of the final design. If I can afford it, I may add animations of the middle steps also, but for sure there will be at least one animation needed for presentation of the project which shows the design in action. If interested you will be required to sign a NDA. Please contact for specifics so you can prepare an estimate.
Category: Other - Engineering &...       
Skills: SolidWorks, Autodesk       

M****Bob
 [?]
Sign in to view client's details.
| M****Bob
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 6m ago  |  Ends: 14d, 11h  |   1 Proposal
I am a graduate student doing research in the pet care industry. I would like to get a sense of volume of pet providers in top US cities. Looking for someone who can scrape 2 platform websites (Dogvacay.com and Rover.com) weekly. Would like to get some quotes and experience backgrounds. Thank you! Your qualifications: - A work style that is extremely detail oriented - A complete Elance profile - References or an established reputation on Elance preferred
Category: Other - Engineering &...       

r****329
 [?]
Sign in to view client's details.
| r****329
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 59m ago  |  Ends: 14d, 9h  |   3 Proposals
I am looking for someone to build a prototype from scratch. It is a "mini" PC. the size of the pc will be small.. I would like the parts and the entire prototype to cost less than $50 us dollars. This is for the parts and cost of everything (not labor). I would like the below configuration for the prototype. Please tell me your final cost to make this prototype for me. You will get all the parts (or make it), up to you. but the prototype itself should not cost more than $50 us dollars to make. Please get back to me if you have any questions or please get back to me with a quote to make this prototype and ship it to me in USA PC Configuration Prototype - 1.8 ghz processor or higher - 4GB ram - 32 gb SSD (if expensive maybe flash storage but only If its significantly cheaper) - 1 HDMI (must support 4k+2k resolution) - Minimum 2 and maximum 4 - USB 3.0 connections (if 4.0 USB connection is same price that's fine too) - Ethernet connection - Wifi - 802.11 b/g/n/ (if ac is same ...
Category: Product Design       

k****amm
 [?]
Sign in to view client's details.
| k****amm
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 24m ago  |  Ends: 14d, 8h  |   17 Proposals
Hi I am looking for someone that can help with domestic house extensions on some large houses. You will have to know the Revit Program and maybe Autocad. Also if you respond to this job offer PLEASE send me construction drawings . Nice 3D renders are good but I am looking for someone that can produce the construction drawings for submitting in to council to get building consent. This is critical to these jobs. So you need to be able to draw construction details. If you have these skill please chase this job. If you do not have these skills please do not. Thank you Kind regards Darren Elmes.
Category: Architecture       
Skills: AutoCAD, AutoDesk Revit       

b****art
 [?]
Sign in to view client's details.
| b****art
|    New Zealand
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 50m ago  |  Ends: 14d, 8h  |   5 Proposals
Need someone to take measurements on bike and existing parts and create 3d CAD drawing for prototyping. Person needs to have possibility to take measurements in Prague, Czech Republic
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD       
Preferred Location: Czech Republic

C****enz
 [?]
Sign in to view client's details.
| C****enz
|    Switzerland
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 17h, 59m ago  |  Ends: 14d, 6h  |   1 Proposal
I have cc3200 launch board plus audio booster pack I need to play wav file from flash to the speaker
Category: Other - Engineering &...       

w****ron
 [?]
Sign in to view client's details.
| w****ron
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 39m ago  |  Ends: 14d, 5h  |   9 Proposals
-3 Port USB 2.0 OTG hub (OTG spec attached, 64.9k ohm resistor specifically for this use. -Wireless charging receiver charges battery AND/OR USB host device (smartphone -Switches/buttons to facilitate different modes Need wiring diagram and BOM only. Parts should be sourceable in Canada, specifically from digikey.ca if possible. PCB design can be addon.
Category: Electrical       

G****ODR
 [?]
Sign in to view client's details.
| G****ODR
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 46m ago  |  Ends: 14d, 5h  |   1 Proposal
Large chip handling system requires city permit in LA county. Looking for consulting on mechanical, building permit requirements Needs to be located in Southern California and familiar with the LA county Building & Safety Division/Mechanical Section
Category: Mechanical       

h****ngg
 [?]
Sign in to view client's details.
| h****ngg
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 13m ago  |  Ends: 14d, 4h  |   2 Proposals
New Product - Project Engineer (Must be in the Greater Toronto, Ontario Area) Reporting directly to the CTO, the Project Manager is responsible for ensuring the manufacture of a new water recycling product. The Project Manager will support and manage the development of company?s product from prototype to its introduction into the market. The manager will ensure product design for manufacturability and is responsible for integration of all new design concepts into production. Job Functions and required Knowledge & Skill: Degree or Diploma in Mechanical or Chemical Engineering Strong knowledge in rotational and injection molding A minimum of 3 years experience in manufacturing, production and assembly Strong 3D modeling skills Proficient with Solid Works Background in plastic part design Background in water and waste water treatment is preferred Demonstrated ability to take preliminary designs from concept to integration and into production Define, deliver and track project timeli...
Category: Other - Engineering &...       
Preferred Location: Canada

m****les
 [?]
Sign in to view client's details.
| m****les
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 22m ago  |  Ends: 14d, 3h  |   17 Proposals
Hello, We are looking for an Estimator for an on-going position. In general, this person will be responsible for completing takeoffs and providing back quantity and descriptive information. We will provide a format for the data collection (excel), and will provide a pre-amble for each project that identifies the specific needs of that project. Quantity of drawings will range from 100 to 1000. Accuracy is of paramount importance, as is turn around time. We are located in GMT -6:00 time zone. It is our hope that we will be able to provide drawings during our daytime work hours and have the takeoffs completed and returned to us by the following morning. We will provide an initial project to complete asap, and then new projects will be provided on an on going basis (though with no guaranteed frequency). You must be able to complete on-going work as needed. Please reply with proposal and any questions. Thank you.
Category: Other - Engineering &...       

N****int
 [?]
Sign in to view client's details.
| N****int
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 24m ago  |  Ends: 14d, 2h  |   3 Proposals
I am looking for help with load calculations, panel, wire and conduit sizing for new construction project in Northern California. Must be familiar with CA and US electrical code.
Category: Electrical       
Preferred Location: United States

f****hen
 [?]
Sign in to view client's details.
| f****hen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 34m ago  |  Ends: 14d, 2h  |   7 Proposals
I have some stl files that are used for 3d casting. example included. Unfortunately I do not have the original MAX files used to create the STL. I need to have the relief design increased in depth, they are not casting clear enough in the current form. the over all form of the item must stay exactly the same, just the relief design change. I have several parts needing this modification, this is example one. I want an hourly rate for several items, but please include an estimate time to do this one example.
Category: 3D Modelling       
Skills: 3D       

v****sen
 [?]
Sign in to view client's details.
| v****sen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 0m ago  |  Ends: 14d, 1h  |   11 Proposals
Hello I will need a 3D mock up showing a city layout with strong content and infrastructure around Smart city technology. See layout attached. Also see sample done by BBC for another project. Thank you. I want a shorter version with narratives at the backend. Maximum 3 minutes   [obscured]  /watch?v=z-xxwzHZc4g
Category: 3D Modelling       
Skills: 3D, Voice Over, 3D Modeling, 3d Animation, 3D Design       

b****fen
 [?]
Sign in to view client's details.
| b****fen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 04, 2015  |  Ends: 13d, 23h  |   2 Proposals
we are a low voltage company-voice, data, cctv, access, nurse call-- need someone who can install our cabling and pathways into architects 3d bim plans. this is a 10 story new construction building.;
Category: 3D Modelling       
Skills: 3D, 3D Systems       

e****unn
 [?]
Sign in to view client's details.
| e****unn
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 04, 2015  |  Ends: 13d, 20h  |   12 Proposals
convet auto cad 2d to 3d autocad ican design piping line with valves also can creat skids and bulilding
Category: 3D Modelling       
Skills: 3D Printing, 3D Design       

e****tia
 [?]
Sign in to view client's details.
| e****tia
|    Egypt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 04, 2015  |  Ends: 13d, 19h  |   11 Proposals
I am looking for a mechanical engineer who would be able to embed a electronic weight sensor into the handle of a suitcase. We want someone to demonstrate the feasibility of this concept mechanically and to be able to tell all the details of the design.
Category: Mechanical       

k****169
 [?]
Sign in to view client's details.
| k****169
|    Hong Kong SAR, PRC
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 04, 2015  |  Ends: 13d, 18h  |   2 Proposals
I need a front for a database process that I have. It needs to be a slick front that opens onto further windows with selection button/options. It needs to connect to my process which is access/sql based.
Category: Other - Engineering &...       
Skills: SQL, access       

o****ypj
 [?]
Sign in to view client's details.
| o****ypj
|    Korea, Republic of
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Aug 04, 2015  |  Ends: 13d, 17h  |   36 Proposals
We have three town houses that require 2D CAD modelling, we have plans sketched and need to work with a Draft/arch to model and advise. Must have experience with residential drafting in Australia.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

r****ati
 [?]
Sign in to view client's details.
| r****ati
|    Australia
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Aug 04, 2015  |  Ends: 88d, 18h  |   21 Proposals
Lots of Electronics Design and PCB Layout projects in the pipeline. This is for electrical, electronics engineering and product design areas. Long-term work. Details will be furnished to hired freelancers.
Category: Electrical       
Preferred Location: Philippines

e****tom
 [?]
Sign in to view client's details.
| e****tom
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job