Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 44m ago  |  Ends: 14d, 19h  |   7 Proposals
Design assembly comprising plastic-moulded and MIM parts. Implement functionality and mouldability requirements. Produce step files and drawings for manufacturing. Solid Works required.
Category: Mechanical       
Skills: SolidWorks, Mechanical Engineering       

R****Cut
 [?]
Sign in to view client's details.
| R****Cut
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 6h, 58m ago  |  Ends: 59d, 18h  |   0 Proposals
Must work in Surrey, B.C. (Cloverdale area). Must be proficient with an oscilloscope. Analyze and understand the signals of fuel injectors and various sensors in a car engine that's operating at different RPM ranges. Then develop a fully programmable device that can intercept and manipulate said signals to alter engine performance/economy. The device must be capable of supporting 3 cylinder (3 injector) to 10 cylinder (10 injector) engines, meaning that while we will create a different plug 'n play harness for each engine, the device (that you will help develop) can be programmed to work with any engine. For instance, if the device will be connected to a V10 engine, then we will upload a V10 program into it. The device should also have logging capability, meaning we can download signals via USB to a laptop. If you think another engineer (or outside contracting) is needed to assist this product development, then please let us know.  If possible, show us the projects that you have ac...
Category: Other - Engineering &...       
Preferred Location: Canada

q****omm
 [?]
Sign in to view client's details.
| q****omm
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 50m ago  |  Ends: 14d, 12h  |   18 Proposals
We are looking for an architectural drafter to complete architectural updates on an as needed basis. We would start with approximately 5 hours of work, see if it is a good match and then start adding more hours as needed. Currently, we need updates on a residential properties, but commercial or other items may be required in the future. All work will be completed through Elance, as we will be using Elance's Work View program. Please send us your hourly rate as well as a description of some of your related experience.
Category: Architecture       

A****DEV
 [?]
Sign in to view client's details.
| A****DEV
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 51m ago  |  Ends: 14d, 12h  |   16 Proposals
Seeking qualified CAD engineer to convert STL or OJB files into IGS or STP. Please do not contact me if you do not understand the task. Conversion requires no errors in the second format. Many files to convert! Starts immediately.
Category: CAD       
Skills: Computer-Aided Design       

r****oys
 [?]
Sign in to view client's details.
| r****oys
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 15m ago  |  Closed  |   5 Proposals
You will need to specify wire diameter, number of turns, inductance, insulation, etc. for a transistor used in a power brick. The example circuit the transistor will go in will be supplied.
Category: Electrical       

d****ius
 [?]
Sign in to view client's details.
| d****ius
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 16h, 34m ago  |  Ends: 14d, 7h  |   1 Proposal
Hello, I am looking for an expert to conduct a market study/ analysis for a "cement based product" for municipal, industrial pipeline repair, rehabilitation and construction. The objective of the analysis: ? Identify the potential application of the product in the North American pipeline market (US and Canada) ? Investigate and identify potential competitive products in the market ? Investigate and estimate the potential market sector size Expected deliverable: ? Report containing all the findings and recommendations ? Proposed testing plan for the product Interested candidates, please send me your proposed plan, approach and timeline needed to finish the study. Thank you FK
Category: Civil & Structural       

p****are
 [?]
Sign in to view client's details.
| p****are
|    Canada
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Sep 04, 2015  |  Ends: 13d, 22h  |   18 Proposals
Job Description: We are looking for a versatile and experienced engineer and designer of electronics. From prototypes to full production, to work with a small team to help us create the hardware part of our products. This individual must be well organized, technically proficient, independent, creative, and accommodating. Skills required: - Must be able to efficiently produce accurate engineering documentation - Excellence in soldering, mechanical assembly, and rework for design prototypes. - Professional courtesy and communications, especially in dealing with customers. - Experience with video/audio streaming, WebRTC, wireless connection, Bluetooth, motion detection is a plus. - Experience with OpenCV will make you our hero. We are looking for a long-term relationship starting with this project. We are also expecting a first-class hardware developers.
Category: Electrical       

a****tan
 [?]
Sign in to view client's details.
| a****tan
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 13d, 19h  |   1 Proposal
I need explanation of the figures and tables of the attached paper. I need protocol of the attached paper
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Sep 03, 2015  |  Ends: 13d, 16h  |   28 Proposals
Embedded hardware engineering support needed to assist with design iteration. Work includes schematic, layout and hardware bring-up.
Category: Product Design       

s****obs
 [?]
Sign in to view client's details.
| s****obs
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 13d, 16h  |   43 Proposals
I need a wire-frame model of a simple product. From the model we will construct patent drawings - but we will do that on our end. I expect going forward I will have 1 to 2 projects/month for quality work. Thank you for your consideration.
Category: 3D Modelling       
Skills: solidwork       

m****34x
 [?]
Sign in to view client's details.
| m****34x
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 03, 2015  |  Ends: 13d, 12h  |   25 Proposals
Need an experienced AutoCad Designer that can create CAD files to be output on a 3D printer. Will work with existing CAD file of item that will be packaged. Will need CAD file and engineered drawing.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, 3D Printing       

G****g62
 [?]
Sign in to view client's details.
| G****g62
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 13d, 8h  |   23 Proposals
Hi, I have at a fair a device that is able to talk to centralised Heat&AC systems (like the ones that you find in hotels) and to control remotely temperature etc.. The device is marketed as a power saver due to the fact that uses ultrasonic sensors to detect the presence of people in the room and shuts down heat/AC or reduces it based on the setting chosen. The device is powered and uses power line network and a proprietary protocol to record power saving (the delta between the power reduced since the absence and what it would have used in power if the device was never in place). I would like to produce this device, right now this little device (15cmx10cm) can not be bough, so I would like to create one to propose to hotels etc... Would you be able to help? How would that work? I am a software person and never tried HW/Electronics before, so I am sorry if this might sound a bit foolish, but I can assure the project is serious and I have intention to find the right partner ...
Category: Electrical       

G****Dub
 [?]
Sign in to view client's details.
| G****Dub
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 5d, 5h  |   12 Proposals
The job involves converting two gerber files (to be provided) into the respective CAD files so that these PCB CAD files that can be edited. The gerber files were given for a reference layout of a electronic component application; unfortunately the existing layouts are not optimised for heat dissipation and the OEM will not supply the CAD files. Gerber File #1: Two layer boards (top and bottom); two traces only Gerber File #2: Four layers boards (top RF signal, RF signal ground, DC signal, DC signal ground); three RF traces; some DC traces. Deliverables of this project: 1. CAD files for the two PCB designs; 2. Check and verification of the gerber vs CAD output Please let me know if you are interested.
Category: CAD       
Skills: Altium Designer, Electronic Design       

J****510
 [?]
Sign in to view client's details.
| J****510
|    Hong Kong SAR, PRC
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 03, 2015  |  Ends: 12d, 22h  |   4 Proposals
I need some one who is good in Image processing and having experience with SIFT algo. The basic will be just write the summary of few papers and Algo. More detail will be sent to selected candidate
Category: Electrical       

e****s88
 [?]
Sign in to view client's details.
| e****s88
|    Austria
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: Sep 03, 2015  |  Ends: 12d, 22h  |   21 Proposals
I am looking to have a range of designs, and then plans drawn for screens/shelters to improve the aesthetics of garbage bin storage areas. The screens will be for a range of bin sizes and be suitable for residential or commercial garbage bin locations. The designs & plans will be as such that they can be taken to a local Australian aluminium or steel manufacture to build with generic parts, (prefer no custom moulds or components that require new extrusions or similar). Once the screen designs and plans are in place I would like to have 3D models of them generated in a range of different finishes (visual only). These 3D models will then become part of a virtual showroom to be utilised in an app that allows people to photograph their bins, and then select the look and finish of the bin screens from within the app. To summaries, 1, Design bin screens. 2, Draw plans for each in the range. 3, Create 3D modelling for each of the range in a couple of different colours/materials. ...
Category: CAD       

B****ens
 [?]
Sign in to view client's details.
| B****ens
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 12d, 16h  |   29 Proposals
Hello, I am looking to find an engineer who can create a box for me that has several features a.) A fixed cylinder like compartment that is apart of the inside of the box and sits on the right side wall. The Cylinder would be 2 inches wide and goes as deep as the box is (2 inches deep). b.) The box would have a floor that moves up and down. A screw at the bottom of the box will do this. This would mean that the box has two floors, the fixed floor and the floor on top that would raise the floor to the top of the box as you turn the screw. c.) The bottom fixed floor would have a 1-inch square indent in the center of the box that is where the head of the screw would be found. Box dimensions are 2 inches tall 8 inches long 5 inches wide I will provide a picture for assistance.
Category: 3D Modelling       

W****ots
 [?]
Sign in to view client's details.
| W****ots
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 12d, 12h  |   8 Proposals
HI, we need a licensed florida architect or engineer to draw a plan for a simple 24xx26x24 3 wall extension that ties into an existing house.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

D****ios
 [?]
Sign in to view client's details.
| D****ios
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 27d, 10h  |   3 Proposals
Imperium, Inc. is presently contract work by a Senior Mechanical Engineer with a minimum of 10 - 15 years of mechanical instrumentation and device experience. Experience to include full life cycle precision product development from concept into production, human engineering design, layout and drawing generation, working with vendors, validating prototypes, and providing sustaining assistance with production released products. 7 years Solidworks experience required. Handheld rugged instrumentation development experience preferred. Candidates must be in the Washington DC or Baltimore area. Candidate shall be capable of collecting and maintaining requirements in electronic format, developing concepts, design layouts, and calculations to support design concepts. Must have good communication skills, require little or no supervision, and possess exceptional creative skills. Optimal additional areas of experience include basic motion control and mechanism design, optical design and indu...
Category: Mechanical       
Skills: SolidWorks, 3D Design, Packaging Design, thermal       
Preferred Location: United States

b****ser
 [?]
Sign in to view client's details.
| b****ser
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 02, 2015  |  Ends: 12d, 8h  |   21 Proposals
I have some CAD models that are very basic, non-colored 3D models in the shape of trophies. I need to hire someone to add color and designs to them for use in a promotional video. There are three different trophy models, two just need to have color added and the third needs to have six different designs applied (baseball, basketball, soccer, golf, bowling, and tennis).
Category: CAD       
Skills: ArchiCAD, 3D Systems       

Q****dio
 [?]
Sign in to view client's details.
| Q****dio
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 02, 2015  |  Closed  |   4 Proposals
I have archicad 16 file. My bimx exporter doesn't work anymore, and I need someone to export it to bimx file. It is 10 seconds job.
Category: Architecture       
Skills: ArchiCAD, Architecture       

****
 [?]
Sign in to view client's details.
| Client *
|    Serbia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Closed  |   47 Proposals
Hi, I am looking for a mechanical drafter to hire by the hour or piecemeal who is capable with Solidworks/CAD to generate some parts from scratch (based on our input) but also to manipulate existing drawings, make minor changes, and generate high quality renderings for marketing images.
Category: 3D Modelling       

h****hot
 [?]
Sign in to view client's details.
| h****hot
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Closed  |   3 Proposals
Dear SIr, We need to conver a file with a DXF extension with the same measurments and scale 1.1 and convert it in to a pdf file. Note the measurment of the file are in inches, and must be convert it in to metric measurment units mainting the proportion of the file. Are you able to do that? if, so how much could it cost? Thanks.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

m****eds
 [?]
Sign in to view client's details.
| m****eds
|    Spain
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Closed  |   14 Proposals
Hi, I'm looking for an engineer to assist me with some research tasks. Please see the attachment. Regards Milad
Category: Mechanical       
Skills: Mechanical Engineering       

D****eld
 [?]
Sign in to view client's details.
| D****eld
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job